I today deleted my OS accidentally. I download the stock rom and moved it to internal memory and did the advanced wipe via TWRP.
But when I tried to flash the new file it told me that the zip file was corrupted .
Now my question Is is possible to push the new zip file via ADB and what are the other ways to do it .
you can do it by pen drive (OTG), downlad stock rom again and try.
If twrp is working you can install your rom my sideload
U can see sideload in advanced menu of twrp
Just connect your PC and run sideload and on CMD write adb sideload rom name.zip and it will flash ROM from pc
suhailhura said:
I today deleted my OS accidentally. I download the stock rom and moved it to internal memory and did the advanced wipe via TWRP.
But when I tried to flash the new file it told me that the zip file was corrupted .
Now my question Is is possible to push the new zip file via ADB and what are the other ways to do it .
Click to expand...
Click to collapse
Just download a custom ROM and flash it or flash a x820 official ROM.
Sent from my Le X820 using XDA Labs
Thanks everyone i have already fixed this via adb.
I just mad this mistake , how to do it ..im noob in the process.. plz help me.. my leeco le 2 is stuck on twrp.. how to install rom again..plz
JiteshJAAT said:
I just mad this mistake , how to do it ..im noob in the process.. plz help me.. my leeco le 2 is stuck on twrp.. how to install rom again..plz
Click to expand...
Click to collapse
install adb and fastboot on your pc
connect the device to pc and open adb (go to the adb folder and press shift and right click mouse and open cmd )
now transfer the stock rom to the adb file ( you can access the phone storage from pc if the phone is on twrp)
now in the phone twrp press advanced > ADB sideload
from the pc (cmd which we opened earlier ) write adb sideload rom name.zip (the name of rom should be identical 100%) hit enter
now wait for few minuts till its done
Related
Im successfuly root my hp tab with help off vroot.. But every reboot tablet automatic factory reset and all data,apps remove any solution?????????
Anyone port cwm aosp base ROM
Where is cwm recovery ???????
Anyone try
Source Code for 1301 7 HP tab,,
http://h20392.www2.hp.com:80/openso...&e=true&fam=Tablet+PCs&prd=HP_7_Plus_13XX-OSP
Solution
rakshakb said:
Im successfuly root my hp tab with help off vroot.. But every reboot tablet automatic factory reset and all data,apps remove any solution?????????
Click to expand...
Click to collapse
I am in the same boat with the factory resets... did you ever find a solution?
Yes, flash update.zip via fastboot adb sideload
Sent from my D2105 using XDA Free mobile app
http://ftp.hp.com/pub/softlib/software12/COL53679/ob-134254-1/update.zip
Sent from my D2105 using XDA Free mobile app
infidellife said:
I am in the same boat with the factory resets... did you ever find a solution?
Click to expand...
Click to collapse
I think in bootloader something that reset after root here is bootloader.fex in update.zip
https://docs.google.com/file/d/0B0hC3FvuMXfEUlFLRG5mTG5lRVU/edit?usp=docslist_api
Sent from my D2105 using xda Forum
Here is boot.img
https://docs.google.com/file/d/0B0hC3FvuMXfETzIxVlhuSVlTUGs/edit?usp=docslist_api
Sent from my D2105 using xda Forum
attachments
Update. Zip
ramdisk
Ramdisk
rakshakb said:
Yes, flash update.zip via fastboot adb sideload
Sent from my D2105 using XDA Free mobile app
Click to expand...
Click to collapse
Could you please tell me how to do that?
How flash hp 7 1301 official 4.2
You need. --
1-) computer
2-)update.zip of tablet (country wise)
3-)fastboot minimal pack.exe (Google it)
4-)tablet
After download files install fastboot minimal pack.exe in your computer. Now copy update zip in computer/c/program file/minimal adb folder. Now open tablet setting scroll down about tablet open it. Tap 8 time on build version . you see development option in setting open it and mark usb debging.now open adb fastboot in window. Conect tablet to compute via usb.enter ADB REBOOT RECOVERY press enter.-now tab is restart in recovery mode now select adb sideload in tablet recovery (use volume button and power button for ok). type in adb ADB SIDELODE UPDATE.ZIP. press enter. File will automaticlly send to tablet and install
Now tablet is official ..........
No success
Tried twice using adb sideload with the update.zip file.
Any ideas?
Solutions?
SkipWire said:
Tried twice using adb sideload with the update.zip file.
Any ideas?
Click to expand...
Click to collapse
Tried the steps set out by http://forum.xda-developers.com/showthread.php?t=2422353 with
no success.
The device can be rooted by enabling developer and select USB debug on 1301 device. Installing and running ADB and Impact applications in windows; .
When the device reboots it defaults to factory settings with no root.:silly:
Can you give me the link of hp 7 plus 1301 asian tablet?
please bro if you have the file give me its link
Anonymous222 said:
please bro if you have the file give me its link
Click to expand...
Click to collapse
SkipWire said:
Tried the steps set out by http://forum.xda-developers.com/showthread.php?t=2422353 with
no success.
The device can be rooted by enabling developer and select USB debug on 1301 device. Installing and running ADB and Impact applications in windows; .
When the device reboots it defaults to factory settings with no root.:silly:
Click to expand...
Click to collapse
rakshakb said:
You need. --
1-) computer
2-)update.zip of tablet (country wise)
3-)fastboot minimal pack.exe (Google it)
4-)tablet
After download files install fastboot minimal pack.exe in your computer. Now copy update zip in computer/c/program file/minimal adb folder. Now open tablet setting scroll down about tablet open it. Tap 8 time on build version . you see development option in setting open it and mark usb debging.now open adb fastboot in window. Conect tablet to compute via usb.enter ADB REBOOT RECOVERY press enter.-now tab is restart in recovery mode now select adb sideload in tablet recovery (use volume button and power button for ok). type in adb ADB SIDELODE UPDATE.ZIP. press enter. File will automaticlly send to tablet and install
Now tablet is official ..........
Click to expand...
Click to collapse
Guys, KITKAT is out for HP 7 Plus. I had successfully rooted the tablet on JB with no bootlooping issues but lost root when updated to Kitkat. Plz update your tablets and let us all work together in developing Custom ROMs and Recoveries.
Dom3616 said:
Guys, KITKAT is out for HP 7 Plus. I had successfully rooted the tablet on JB with no bootlooping issues but lost root when updated to Kitkat. Plz update your tablets and let us all work together in developing Custom ROMs and Recoveries.
Click to expand...
Click to collapse
Kitkat is available but it's flawed. Received "update -1" and left in recover mode until I rolled back.:silly:
SkipWire said:
Kitkat is available but it's flawed. Received "update -1" and left in recover mode until I rolled back.:silly:
Click to expand...
Click to collapse
No, it is not flawed. When you flash the zip the first time in recovery, it flashes your bootloader and recovery. Reboots into recovery again showing received update-1. Then choose the zip again. You have to do this 3 or 4 times. Keep on choosing the revovery zip again until it says completed.
Has everyone given up?
I wanted to install a custom ROM. In my Moto E XT1022 and downloaded Paranoi'Android custom ROM . My phone is rooted and have installed TWRP recovery as well . But when I have read that installing ROM for SD from entering recovery mode gives as option to browse and chose the zip file from SD but when I choose that option it says install from SD complete and nothing happens . Also I have tried updating from ADB but I get error device not found while applying the sideload command on pc . The problem is when my mobile phone is switched on then I connect and I can see my device listed on adb devices but when I enter recovery mode the device list is empty. Please can anyone assist what I am doing wrong .
P.S. : I have installed correct driver on computer as I rooted couple of days back only also debugging is enabled.
ashutosh7379 said:
I wanted to install a custom ROM. In my Moto E XT1022 and downloaded Paranoi'Android custom ROM . My phone is rooted and have installed TWRP recovery as well . But when I have read that installing ROM for SD from entering recovery mode gives as option to browse and chose the zip file from SD but when I choose that option it says install from SD complete and nothing happens . Also I have tried updating from ADB but I get error device not found while applying the sideload command on pc . The problem is when my mobile phone is switched on then I connect and I can see my device listed on adb devices but when I enter recovery mode the device list is empty. Please can anyone assist what I am doing wrong .
P.S. : I have installed correct driver on computer as I rooted couple of days back only also debugging is enabled.
Click to expand...
Click to collapse
In bl type fastboot devices and see..or else try another port and install the drivers again
Sent from my XT1022 using XDA Premium mobile app
-Adarsh- said:
In bl type fastboot devices and see..or else try another port and install the drivers again
Sent from my XT1022 using XDA Premium mobile app
Click to expand...
Click to collapse
Did that . it didn't helped . aslo when I connect my phone with PC when in fastboot mode is can see my device listed but when I enter recovery mode then connect I hear a 'Device failed to connect' Sound of windows and also don't get device losted .
P.S: I have disable firewall and antivirus
ashutosh7379 said:
Did that . it didn't helped . aslo when I connect my phone with PC when in fastboot mode is can see my device listed but when I enter recovery mode then connect I hear a 'Device failed to connect' Sound of windows and also don't get device losted .
P.S: I have disable firewall and antivirus
Click to expand...
Click to collapse
1.R u not able to install via twrp recovery?
2.r u able to flash stock rom?
3.try using old twrp 2.7.x.x version of twrp goto twrp recovery - >wipe->advanced->wipe dalvik, cache, system, and go back and factory reset again...
4. Download Unofficial CM11 Stable 2 ROM and flash it with gapps
R u able to boot?
If yes the u r good to flash paranoid android...
Adarsh1998 said:
1.R u not able to install via twrp recovery?
2.r u able to flash stock rom?
3.try using old twrp 2.7.x.x version of twrp goto twrp recovery - >wipe->advanced->wipe dalvik, cache, system, and go back and factory reset again...
4. Download Unofficial CM11 Stable 2 ROM and flash it with gapps
R u able to boot?
If yes the u r good to flash paranoid android...
Click to expand...
Click to collapse
Thanks I figured out last night what I was doing wrong was flashing ROM with help of the recovery already present in phone not with twrp .I did with twrp and installed the Pananoid successfully . Thanks anyway.
P.S. : Panaroid android is working like charm with no bugs as of no like with cellular data and WiFi everything working fine and stable .
OnePlus 2 MEGA UNBRICK GUIDES​I've been looking for OnePlus 2 unbrick guides (Detailed, With working links) recently & came out with 2 best guides out there.
These guides are Well explained with working Download links to every necessary files (So I don't need to make a guide here). Use any guide below to recover your OPT.
https://forums.oneplus.net/threads/updated-29-03-2016-mega-unbrick-guide-for-a-hard-bricked-oneplus-2.347607/
https://forums.oneplus.net/threads/guide-stock-users-soft-bricked-hard-bricked-devices-after-3-0-2-update.449640/
I take no Responsibility as I didn't make those guides (Just pointed them).
Credits :- Naman Bhalla & Gaurav Rohilla @ OnePlus Fourms, Me (For pointing them)
Tested on my OnePlus 2 (A2001)
Press :good: Thanks! if I helped​
my idiot little brother accidentally wiped everything....i can only boot in orange twrp recovery(hydrogen os version)..but there is nothing to back to recover from or zip file to flash from....
so i tried to adb push zip file and adb sideload rom but it says...device not found
how can i repair my phone guys...big help needed
when i fastboot..the device is recognized but when i adb push device not found...help guys...
my idiot little brother accidentally wiped everything....i can only boot in orange twrp recovery(hydrogen os version)..but there is nothing to back to recover from or zip file to flash from....
so i tried to adb push zip file and adb sideload rom but it says...device not found
how can i repair my phone guys...big help needed
when i fastboot..the device is recognized but when i adb push device not found...help guys...
Click to expand...
Click to collapse
You need to install drivers correctly. Try this ---> http://www.technobuzz.net/oneplus-two-usb-drivers/
B!Gguy said:
You need to install drivers correctly. Try this ---> http://www.technobuzz.net/oneplus-two-usb-drivers/
Click to expand...
Click to collapse
i can't turn on the phone..so how will the pc show it in the device manager?
i can only get to the fastboot mode...to recovery option....
the phone is fully wiped...please help me
i can't turn on the phone..so how will the pc show it in the device manager?
i can only get to the fastboot mode...to recovery option....
the phone is fully wiped...please help me
Click to expand...
Click to collapse
You don't have to turn on the phone (only need fastboot mode). Install ADB and Fastboot drivers correctly. Connect phone in fastboot mode. Sideload rom zip file or push zip file to sdcard & flash it via recovery.
MODS: Please move this question to the HELP section - incorrectly posted. Thanks.
Hello,
I am trying to root the Global MIUI _V10.2.1.0.PECMIXM ROM using Magisk. I want my phone to remain encrypted, and having spent all day today trying to achieve this, I am turning here for help.
I have tried flashing via Fastboot and TWRP, have tried flashing Disable DMVerity (without disabling the force encryption) before, and after flashing Magisk. I hava managed to get Magisk 18 flashed and able to boot to the ROM, but when I open Magisk Manager (Installed by the flash) it updates itself and says it needs to install Magisk, proposing to download it - or patch boot img.
Every time I try to flash the downloaded zip, or try fastboot flashing the modified boot.img, the phone won't boot - it just ends up in TWRP recovery.
I have wiped data 100s of times to try to fix this, to no avail.
I have tried to boot into TWRP without flashing it, but this just hands on the TWRP flash screen every time.
Any help / tips would be appreciated.
Were you following any tutorial post? Recent xiaomi phones come with more strict policy on bootload locks. I'm not familiar with it, but if I didn't misunderstand, without BL unlock it's kinda dangerous to flash anything on the phone.
msg7086 said:
Were you following any tutorial post? Recent xiaomi phones come with more strict policy on bootload locks. I'm not familiar with it, but if I didn't misunderstand, without BL unlock it's kinda dangerous to flash anything on the phone.
Click to expand...
Click to collapse
Thanks for replying. Yes, following tutorials, have unlocked my bootloader and can flash ROMs, just cannot get the latest MIUI 10 Global Stable rooted, without decrypting the phone. I have managed it on the Xiaomi.eu global stable, but not with the original Stock ROM.
Has anyone succeeded?
hello bro, u can try my way.
NEED:
unlock bootloader.
folder ADB / u can download all in my GG driver or internet from other source if u scare virus (^o^)
twrp / u can download all in my GG driver or internet from other source if u scare virus (^o^)
diver ADB / u can download all in my GG driver or internet from other source if u scare virus (^o^)
PREPARING:
download and copy to phone store and folder ADB
u should rename file TWRP with short name, any name u can remember. (ex: twrp.img or aaa.img, etc....)
install diver for PC/ LAP, u can try to plug mi phone in case FASTBOOT and check in DEVICE MANAFER of PC/ LAP.
remember ENABLE USB debugging on phone
OK, ACTION:
open CMD/ command window in folder ADB (u can put this folder at any diver on PC / LAP) with right click at this folder.
type all commands, follow with contrucs:
adb reboot bootloader (past this if u are in BL)
choose 1 in 2 ways:
1.
fastboot flash recovery twrp.img (do it to install recovery cook replace recovery stock)
fastboot flash misc misc.bin (do this line if u use stock folder china - TWRP-3.2.3-1202-XIAOMI8UD-CN-wzsx150-fastboot.7z)
fastboot boot twrp.img (do it for reboot to recover cook)
2.
fastboot boot twrp.img (do it, u use recovery temporary recovery cook and very easy, find file recovery, install it)
(test again by to use temporary reovery, reboot to recovery again)
note: i like second way, very easy and fast with pro person (^o^)
i tested in all miui stock (china, global)
HAVE FUN \(^o^)/
this link for all
https://drive.google.com/open?id=1uT8g1oOOkD27P2fylNzlAlXrT8PbCJEs
do note use it if u scare virus, malware, etc........ \(^o^)/
reply me if u can not apply all or do not dowload my GG driver.
u can read and do all with this stock link in miui en (http://en.miui.com/thread-3671565-1-1.html)
t4manh198E said:
hello bro, u can try my way.
NEED:
unlock bootloader.
folder ADB / u can download all in my GG driver or internet from other source if u scare virus (^o^)
twrp / u can download all in my GG driver or internet from other source if u scare virus (^o^)
diver ADB / u can download all in my GG driver or internet from other source if u scare virus (^o^)
PREPARING:
download and copy to phone store and folder ADB
u should rename file TWRP with short name, any name u can remember. (ex: twrp.img or aaa.img, etc....)
install diver for PC/ LAP, u can try to plug mi phone in case FASTBOOT and check in DEVICE MANAFER of PC/ LAP.
remember ENABLE USB debugging on phone
OK, ACTION:
open CMD/ command window in folder ADB (u can put this folder at any diver on PC / LAP) with right click at this folder.
type all commands, follow with contrucs:
adb reboot bootloader (past this if u are in BL)
choose 1 in 2 ways:
1.
fastboot flash recovery twrp.img (do it to install recovery cook replace recovery stock)
fastboot flash misc misc.bin (do this line if u use stock folder china - TWRP-3.2.3-1202-XIAOMI8UD-CN-wzsx150-fastboot.7z)
fastboot boot twrp.img (do it for reboot to recover cook)
2.
fastboot boot twrp.img (do it, u use recovery temporary recovery cook and very easy, find file recovery, install it)
(test again by to use temporary reovery, reboot to recovery again)
note: i like second way, very easy and fast with pro person (^o^)
i tested in all miui stock (china, global)
HAVE FUN \(^o^)/
this link for all
https://drive.google.com/open?id=1uT8g1oOOkD27P2fylNzlAlXrT8PbCJEs
do note use it if u scare virus, malware, etc........ \(^o^)/
reply me if u can not apply all or do not dowload my GG driver.
u can read and do all with this stock link in miui en (http://en.miui.com/thread-3671565-1-1.html)
Click to expand...
Click to collapse
Thanks for replying. However, this tells me how to flash TWRP, how to boot to TWRP - I have no problem doing that whatsoever. I can successfully do that again and again.
What I have not been able to do is flash Magisk v18 on v10 stock ROM and be able to boot successfully. It bootloops into TWRP.
My post help u to install twrp or flash twrp
I do not know your mean what is flash twrp !?
Reboot to recov cook by press volumn +/- and power button
Use magisk 17.1 stanle, u can find it in my gg driver or download in miui eu 's page
---------- Post added at 05:03 AM ---------- Previous post was at 05:02 AM ----------
nealed said:
Thanks for replying. However, this tells me how to flash TWRP, how to boot to TWRP - I have no problem doing that whatsoever. I can successfully do that again and again.
What I have not been able to do is flash Magisk v18 on v10 stock ROM and be able to boot successfully. It bootloops into TWRP.
Click to expand...
Click to collapse
1 in 2 ways is certainly successful
nealed said:
Thanks for replying. However, this tells me how to flash TWRP, how to boot to TWRP - I have no problem doing that whatsoever. I can successfully do that again and again.
What I have not been able to do is flash Magisk v18 on v10 stock ROM and be able to boot successfully. It bootloops into TWRP.
Click to expand...
Click to collapse
Hey, I'm success root my mi 8 pro (Android 9 V10.2.1.0.PECMIXM - MIUI 10)
If you know how to use TWRP, now just reboot your mi 8 pro to TWRP
and then choose Mount > check system & vendor.
Then flash the Latest Version of magisk (v18.1)
REMEMBER : TO MOUNT >> CHECK SYSTEM & VENDOR. AFTER THAT JUST FLASH MAGISK. ONLY MAGISK !!!
And then reboot to your system.
After that, download the latest versio of Magisk Manager, install it and open it.
And BOOOOM~
Your Mi 8 Pro just rooted.
nfadrizp said:
Hey, I'm success root my mi 8 pro (Android 9 V10.2.1.0.PECMIXM - MIUI 10)
If you know how to use TWRP, now just reboot your mi 8 pro to TWRP
and then choose Mount > check system & vendor.
Then flash the Latest Version of magisk (v18.1)
REMEMBER : TO MOUNT >> CHECK SYSTEM & VENDOR. AFTER THAT JUST FLASH MAGISK. ONLY MAGISK !!!
And then reboot to your system.
After that, download the latest versio of Magisk Manager, install it and open it.
And BOOOOM~
Your Mi 8 Pro just rooted.
Click to expand...
Click to collapse
I rooted firsr u
nd now i am using mi mix 3 ???
how to revert to stock rom from pbrp , also i am unable to connect to connect to fastboot when its in bootloader i have also updated drivers but its still not working , it works on another pc but not mine any ideas need help
DId you take a backup of the stock recovery? If so, then place that stock recovery in the storage of your phone and simply flash it using pbrp. That should work.
And if you forgot to do that, download a stock rom from realme website for Realme 6. Open that rom using a program like Winrar, you will find a file named recovery.img. Extract that, place it in phone storage and then flash it in pbrp