Hello
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
*/
This guide will show you how to install TWRP and SuperSU on your P10 Lite.
What we need to do?
*Installing ADB and Fastboot in your computer if you haven't*
*Unlock Bootloader*
*Flash TWRP*
*Flash SuperSU*
Installing ADB and Fastboot
https://forum.xda-developers.com/showthread.php?t=2588979
Unlocking the Bootloader
Note: Unlocking bootloader will completely wipe your device’s data(Everything like music, photos, videos & apps).So it's recommended taking backup of your important data.
*Install HiSuite drivers are inluded*
http://consumer.huawei.com/minisite/HiSuite_en/index.html
*Now open the link below and sign in with your huawei ID and follow the Instructions until you get your 16-digt code*
https://hwid5.vmall.com/CAS/portal/loginAuth.html?lang=en-us&validated=true&themeName=red&service=http%3A%2F%2Femui.huawei.com%2Fen%2Fplugin%2Fhwlogin%2Fvalidate%3Fru%3Dhttp%253A%252F%252Femui.huawei.com%252Fen%252Fplugin%252Funlock%252Findex&loginChannel=22000000&reqClientType=2023
*Go to Developer Option and Enable OEM Unlock and USB Debugging
*Now plug your usb and open ADB and type*
adb reboot bootloader
Click to expand...
Click to collapse
Once you're in the bootloader type this
fastboot oem unlock your 16-digit code
Click to expand...
Click to collapse
Your Device will automatically factory-reset and reboot.
Now you have an Unlocked-Bootloader.
Installing TWRP:
Download(Thanks to Manuela.K):
https://mega.nz/#!tUJhmJiZ!ZgV9ZTPqNYG8XhRycVhT8FOBG0ffkUxIesf5V3abmqE
Connect your Phone and type this in ADB
adb devices
Click to expand...
Click to collapse
it will show the coonnected devices
adb reboot bootloader
Click to expand...
Click to collapse
When you're in fastboot mode type this
fastboot flash recovery (Drag the downloaded twrp)
Click to expand...
Click to collapse
Now type
fastboot reboot
Click to expand...
Click to collapse
When the phone starts
adb reboot recovery
Click to expand...
Click to collapse
Now you will boot into recovery
Installing SuperSu (ROOT!!):
*First Download SuperSu for EMUI 5 SuperSu is not officially supported yet*
https://forum.xda-developers.com/p9/development/root-supersu-2-81-emui-5-t3612258
*choose 1a or 1b*
*Put it in SDcard and boot to TWRP by adb or by holding power+vol-up until huawei logo show up*
*In Twrp press install and select storage SDcard and select your supersu zip*
*Flash it*
*Reboot and check your root by root checker*
maxwelx64 said:
Link for getting unlock code is not working for me.
I get the unlock code from here:
emui.huawei.com/en/plugin/unlock/index
Another thing is the usb debugging mode need to switch on again after the reset.
Hope this will help.
Click to expand...
Click to collapse
aburezk said:
adb reboot bootloader
Click to expand...
Click to collapse
When you're in fastboot mode type this
fastboot flash recovery (Drag the downloaded twrp)
Click to expand...
Click to collapse
Now type
adb reboot
Click to expand...
Click to collapse
Click to expand...
Click to collapse
adb reboot bootloader
Click to expand...
Click to collapse
: the device enters to bootloader/fastboot mode
When you're in fastboot mode type this
fastboot flash recovery (Drag the downloaded twrp)
Click to expand...
Click to collapse
: flash a custom recovery
Now type
adb reboot
Click to expand...
Click to collapse
Wrong !
Wile device in bootloader mode, ONLY fastboot command are allowed !
Please send the right command : "adb reboot" -> "fastboot reboot"
Now type
fastboot reboot
Click to expand...
Click to collapse
Regards,
surdu_petru said:
: the device enters to bootloader/fastboot mode
When you're in fastboot mode type this
: flash a custom recovery
Now type
Wrong !
Wile device in bootloader mode, ONLY fastboot command are allowed !
Please send the right command : "adb reboot" -> "fastboot reboot"
Now type
Regards,
Click to expand...
Click to collapse
Sorry, thanks
aburezk said:
Hello
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
*/
This guide will show you how to install TWRP and SuperSU on your P10 Lite.
What we need to do?
*Installing ADB and Fastboot in your computer if you haven't*
*Unlock Bootloader*
*Flash TWRP*
*Flash SuperSU*
Installing ADB and Fastboot
https://forum.xda-developers.com/showthread.php?t=2588979
Unlocking the Bootloader
Note: Unlocking bootloader will completely wipe your device’s data(Everything like music, photos, videos & apps).So it's recommended taking backup of your important data.
*Install HiSuite drivers are inluded*
http://consumer.huawei.com/minisite/HiSuite_en/index.html
*Now open the link below and sign in with your huawei ID and follow the Instructions until you get your 16-digt code*
https://hwid5.vmall.com/CAS/portal/loginAuth.html?lang=en-us&validated=true&themeName=red&service=http%3A%2F%2Femui.huawei.com%2Fen%2Fplugin%2Fhwlogin%2Fvalidate%3Fru%3Dhttp%253A%252F%252Femui.huawei.com%252Fen%252Fplugin%252Funlock%252Findex&loginChannel=22000000&reqClientType=2023
*Go to Developer Option and Enable OEM Unlock and USB Debugging
*Now plug your usb and open ADB and type*
Once you're in the bootloader type this
Your Device will automatically factory-reset and reboot.
Now you have an Unlocked-Bootloader.
Installing TWRP:
Download(Thanks to Manuela.K):
https://mega.nz/#!tUJhmJiZ!ZgV9ZTPqNYG8XhRycVhT8FOBG0ffkUxIesf5V3abmqE
Connect your Phone and type this in ADB
it will show the coonnected devices
When you're in fastboot mode type this
Now type
When the phone starts
Now you will boot into recovery
Installing SuperSu (ROOT!!):
*First Download SuperSu for EMUI 5 SuperSu is not officially supported yet*
https://forum.xda-developers.com/p9/development/root-supersu-2-81-emui-5-t3612258
*choose 1a or 1b*
*Put it in SDcard and boot to TWRP by adb or by holding power+vol-up until huawei logo show up*
*In Twrp press install and select storage SDcard and select your supersu zip*
*Flash it*
*Reboot and check your root by root checker*
Click to expand...
Click to collapse
Link for getting unlock code is not working for me.
I get the unlock code from here:
emui.huawei.com/en/plugin/unlock/index
Another thing is the usb debugging mode need to switch on again after the reset.
Hope this will help.
Why is this thread here, we have P10 Lite forum?
dejansabo said:
Why is this thread here, we have P10 Lite forum?
Click to expand...
Click to collapse
I created this before p10 lite forum was made
TWRP problems
Hey man, i unlocked the bootloader and installed twrp. In the twrp install menu it shows me a bunch of numbers and letters being my internal storage. What can i do? I have huawei p10 lite
SebiTheJOker said:
Hey man, i unlocked the bootloader and installed twrp. In the twrp install menu it shows me a bunch of numbers and letters being my internal storage. What can i do? I have huawei p10 lite
Click to expand...
Click to collapse
That's because of encrypted files
aburezk said:
That's because of encrypted files
Click to expand...
Click to collapse
Can you explain me more about that? Is there something I can do to decrypt them? I have put the supersu file on internal storage and it shows encrypted. It s my first Huawei and I m newbie with it. Thank you very much
SebiTheJOker said:
Can you explain me more about that? Is there something I can do to decrypt them? I have put the supersu file on internal storage and it shows encrypted. It s my first Huawei and I m newbie with it. Thank you very much
Click to expand...
Click to collapse
You need an SDcard first put the Supersu.zip in the SDcard then you can install it
aburezk said:
You need an SDcard first put the Supersu.zip in the SDcard then you can install it
Click to expand...
Click to collapse
Thank you, it worked. Is there any way to flash stock firmware again? Before i flashed supersu i tried using dload folder with update.app and it didn't worked. (was-LX1 europe)
SebiTheJOker said:
Thank you, it worked. Is there any way to flash stock firmware again? Before i flashed supersu i tried using dload folder with update.app and it didn't worked. (was-LX1 europe)
Click to expand...
Click to collapse
I haven't tried flashing any stock updates
aburezk said:
That's because of encrypted files
Click to expand...
Click to collapse
SebiTheJOker said:
Hey man, i unlocked the bootloader and installed twrp. In the twrp install menu it shows me a bunch of numbers and letters being my internal storage. What can i do? I have huawei p10 lite
Click to expand...
Click to collapse
i got the same problem, i also have an external sd card but the phone didn't detect it, what can i do to resolve this issue?
simo1994 said:
i got the same problem, i also have an external sd card but the phone didn't detect it, what can i do to resolve this issue?
Click to expand...
Click to collapse
You need to install .zip from SD Card
Try this TWRP
https://forum.xda-developers.com/android/development/beta-t3619496
aburezk said:
You need to install .zip from SD Card
Try this TWRP
https://forum.xda-developers.com/android/development/beta-t3619496
Click to expand...
Click to collapse
it says version 3.1.1-0 but when i install it says 3.1.1-2 that i already installed before...
and files are still encrypted and i don't find the zip
simo1994 said:
it says version 3.1.1-0 but when i install it says 3.1.1-2 that i already installed before...
and files are still encrypted and i don't find the zip
Click to expand...
Click to collapse
Backup your apps and data in Huawei backup
Flash this zip
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
Wipe data in twrp which will remove encryption
aburezk said:
Backup your apps and data in Huawei backup
Flash this zip
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
Wipe data in twrp which will remove encryption
Click to expand...
Click to collapse
i've solved using another method, i've installed the zip file via ADB sideload
Hi. I have done all the steps and now i have twrp installed, but when supersu is installed my p10 lite wont work with headphones. This happens exclusively after installing supersu, after remove root my phone went normal :/ any ideas? I need root acces to install viper4android (sorry for my bad english) thanks
Hello, excuse my English but not very comfortable on it.
To the page "emui.huawei.com/en/plugin/unlock/detail" I fill in the information in order to apply for the unlock password, knowing that I have a "P10 Lite Mod: WAS-L1" Tab "PRODUCT IMEI or MEID" I register my imei, but apparently I have two imei. I have to try several combinations (ex: xxxxx / xxxxx) and it puts me "IMEI must be composed of decimal numbers (0 ~ 9) or letters (a ~ z or A ~ Z)." How should I register these IMEIs to validate my application?
Thanks in advance.
pika83 said:
Hello, excuse my English but not very comfortable on it.
To the page "emui.huawei.com/en/plugin/unlock/detail" I fill in the information in order to apply for the unlock password, knowing that I have a "P10 Lite Mod: WAS-L1" Tab "PRODUCT IMEI or MEID" I register my imei, but apparently I have two imei. I have to try several combinations (ex: xxxxx / xxxxx) and it puts me "IMEI must be composed of decimal numbers (0 ~ 9) or letters (a ~ z or A ~ Z)." How should I register these IMEIs to validate my application?
Thanks in advance.
Click to expand...
Click to collapse
Just put one imei.the first or the second..
Related
My phone is rooted and i was modifying something in the system file then i accidentally deleted the entire system file of my phone.. My phone turned off after ive deleted and when i tried to turn it on it is stuck on boot..or the logo of my phone.. Can anyone help me recover the system file of my phone or the operating system i may say.. I have tried the android system recovery 3e and wipe/factory set my phone but still stuck on boot..im using cherry mobile flare 2.1 running on android jellybean 4.1:crying:
dexterrio14 said:
My phone is rooted and i was modifying something in the system file then i accidentally deleted the entire system file of my phone.. My phone turned off after ive deleted and when i tried to turn it on it is stuck on boot..or the logo of my phone.. Can anyone help me recover the system file of my phone or the operating system i may say.. I have tried the android system recovery 3e and wipe/factory set my phone but still stuck on boot..im using cherry mobile flare 2.1 running on android jellybean 4.1:crying:
Click to expand...
Click to collapse
you have to flash the same rom with a custom recovery you kill you android
emanuelrv said:
you have to flash the same rom with a custom recovery you kill you android
Click to expand...
Click to collapse
. Could you please tell me in details what steps should i do in order to flash the same rom.. Thanks..i really needed to get my phone back:crying:
Follow this, should work
dexterrio14 said:
My phone is rooted and i was modifying something in the system file then i accidentally deleted the entire system file of my phone.. My phone turned off after ive deleted and when i tried to turn it on it is stuck on boot..or the logo of my phone.. Can anyone help me recover the system file of my phone or the operating system i may say.. I have tried the android system recovery 3e and wipe/factory set my phone but still stuck on boot..im using cherry mobile flare 2.1 running on android jellybean 4.1:crying:
Click to expand...
Click to collapse
1. Turn off your phone.
2. Boot your phone in Recovery Mode (Volume Up + Power Button).
3. Install the zip file in the following link. h ttp: // ww w.m ediafire. com/download/sh541l2u2e78vl6/CWM6.0.27.z ip (DELETE ALL SPACES )
4.Reboot into the custom recovery you have just installed.
5.Go to toggle signature verification and check if it is enabled or disabled. If it is enabled, you HAVE TO disable it.
6. Select ROM.zip from your phone memory and flash it.
7.If you do not have the rom on your phone(The same ROM of which you deleted the system folder), then mount the usb storage from recovery with your phone connected to the PC. Transfer files to the usb storage or phone storage, which ever is convenient.
8.Boot into Recovery and flash the ROM.
9.Reboot phone and WAIT.
Let me know if that works :good:
System file delete on Your Root Phone
Am follow same condition as you, but bro you need to add new rom on its.your phone is rooted as well so you are able to add new rom on your handset, other wise you go to mobile care center they will flash ur handset and ur set will ok. :laugh:
Mobile Care Center ? Noo
MrJaswal said:
Am follow same condition as you, but bro you need to add new rom on its.your phone is rooted as well so you are able to add new rom on your handset, other wise you go to mobile care center they will flash ur handset and ur set will ok. :laugh:
Click to expand...
Click to collapse
Mr.Jaswal, if he really had to go to the mobile care center, he wouldn't be participating the XDA Forums. People go to the mobile care center only when their phone is hard bricked, and i do not think that is the case here. I'm sure the problem can be solved.
Reflash stock ROM again.You will get your system back.
Sent from my Xperia Arc using XDA Free mobile app
Shreyas_Singh said:
1. Turn off your phone.
2. Boot your phone in Recovery Mode (Volume Up + Power Button).
3. Install the zip file in the following link. h ttp: // ww w.m ediafire. com/download/sh541l2u2e78vl6/CWM6.0.27.z ip (DELETE ALL SPACES )
4.Reboot into the custom recovery you have just installed.
5.Go to toggle signature verification and check if it is enabled or disabled. If it is enabled, you HAVE TO disable it.
6. Select ROM.zip from your phone memory and flash it.
7.If you do not have the rom on your phone(The same ROM of which you deleted the system folder), then mount the usb storage from recovery with your phone connected to the PC. Transfer files to the usb storage or phone storage, which ever is convenient.
8.Boot into Recovery and flash the ROM.
9.Reboot phone and WAIT.
Let me know if that works :good:
Click to expand...
Click to collapse
I dont have a stock rom for my phone..can i try to flash a new rom for my phone with the same version of my os.. Will it work?
dexterrio14 said:
I dont have a stock rom for my phone..can i try to flash a new rom for my phone with the same version of my os.. Will it work?
Click to expand...
Click to collapse
Yes you can, as long as your phone is rooted.But make sure you use a custom recovery and not the stock recovery .Meaning,you have to flash another recovery like CWM Recovery. And please disable signature verification. Let me know what happens Reset to factory settings and do a full wipe before doing anything else though
Shreyas_Singh said:
Flash the same custom ROM you were using before. But make sure you use a custom recovery and not the stock recovery IF you get an error while flashing. And please disable signature verification. Let me know what happens
Click to expand...
Click to collapse
how can i access custom recovery mod?....i can access stock recovery but not custom recovery.. should i install the cwm.zip file first to access custom recovery mod?
CustomRom
dexterrio14 said:
how can i access custom recovery mod?....i can access stock recovery but not custom recovery.. should i install the cwm.zip file first to access custom recovery mod?
Click to expand...
Click to collapse
Yes, install the CWM.zip via stock recovery first. Find the right version for your phone.This one:
h ttp://ww w.mediafire.com/download/sh5 41l2u2e78vl6/CWM6.0. 27.z ip (Delete the spaces and use link)
After you have done that, you can flash a custom rom like this one:
h ttp://w ww.mediafire.co m/download/cxec9dz9be86icc/DarkBoid+ROM+by+Santo_Rock.zi p(Delete spaces in link)
Let me know the satus after that :good:
REMEMBER: Disable signature verification from the recovery menu of the CWM recovery
Shreyas_Singh said:
Yes, install the CWM.zip via stock recovery first. Find the right version for your phone.This one:
h ttp://ww w.mediafire.com/download/sh5 41l2u2e78vl6/CWM6.0. 27.z ip (Delete the spaces and use link)
After you have done that, you can flash a custom rom like this one:
h ttp://w ww.mediafire.co m/download/cxec9dz9be86icc/DarkBoid+ROM+by+Santo_Rock.zi p(Delete spaces in link)
Let me know the satus after that :good:
REMEMBER: Disable signature verification from the recovery menu of the CWM recovery
Click to expand...
Click to collapse
for instance i have successfully installed the cwm.zip file via stock recovery.. If i long press the volume up +power will it be still in stock recovery or in clockworkmod recovery already?
dexterrio14 said:
for instance i have successfully installed the cwm.zip file via stock recovery.. If i long press the volume up +power will it be still in stock recovery or in clockworkmod recovery already?
Click to expand...
Click to collapse
If that's the way your phone goes into recovery , then it will go into the custom recovery. You will not have the stock recovery. You won't need it
Shreyas_Singh said:
If that's the way your phone goes into recovery , then it will go into the custom recovery. You will not have the stock recovery. You won't need it
Click to expand...
Click to collapse
it say's installation aborted when i was flashing the cwm.zip file in stock recovery:crying:
dexterrio14 said:
it say's installation aborted when i was flashing the cwm.zip file in stock recovery:crying:
Click to expand...
Click to collapse
Did you disable signature verification? Do that and try. If that doesn't work either you can use fastboot to install recovery, which will 100%.
Follow these steps :
1.USB drivers for your phone must be installed on a computer.
2.Android SDK must be installed on your computer.
3.Your phone must be connected to your computer via USB.
4.The ADB and Fastboot drivers must be pasted into the folder where Android SDK is installed.
5.Navigate to the Android SDK folder,press shift and Right Click, select the Open Command Window here option.
6.Then type the following after your phone is recognized by cmd.In most cases it is.(Type this command to start fastboot : "adb reboot bootloader" and then "fastboot devices")
7.After that type the following : fastboot devices
And then : fastboot flash recovery FILE.ZIP
8.And you are done Open your custom recovery with the key combination used to open your stock recovery.
Let me know if it worked.
Shreyas_Singh said:
Did you disable signature verification? Do that and try. If that doesn't work either you can use fastboot to install recovery, which will 100%.
Follow these steps :
1.USB drivers for your phone must be installed on a computer.
2.Android SDK must be installed on your computer.
3.Your phone must be connected to your computer via USB.
4.The ADB and Fastboot drivers must be pasted into the folder where Android SDK is installed.
5.Navigate to the Android SDK folder,press shift and Right Click, select the Open Command Window here option.
6.Then type the following after your phone is recognized by cmd.In most cases it is.(Type this command to start fastboot : "adb reboot bootloader" and then "fastboot devices")
7.After that type the following : fastboot devices
And then : fastboot flash recovery FILE.ZIP
8.And you are done Open your custom recovery with the key combination used to open your stock recovery.
Let me know if it worked.
Click to expand...
Click to collapse
Do i need to download the adb and Fastboot Drivers? Or is it already inside the file of Android Sdk but it must be installed first..
Shreyas_Singh said:
Did you disable signature verification? Do that and try. If that doesn't work either you can use fastboot to install recovery, which will 100%.
Follow these steps :
1.USB drivers for your phone must be installed on a computer.
2.Android SDK must be installed on your computer.
3.Your phone must be connected to your computer via USB.
4.The ADB and Fastboot drivers must be pasted into the folder where Android SDK is installed.
5.Navigate to the Android SDK folder,press shift and Right Click, select the Open Command Window here option.
6.Then type the following after your phone is recognized by cmd.In most cases it is.(Type this command to start fastboot : "adb reboot bootloader" and then "fastboot devices")
7.After that type the following : fastboot devices
And then : fastboot flash recovery FILE.ZIP
8.And you are done Open your custom recovery with the key combination used to open your stock recovery.
Let me know if it worked.
Click to expand...
Click to collapse
In the command: fastboot flash recovery FILE.ZIP...is it really FILE.ZIP that i will input or CWM.Zip or TWRP.Zip?
dexterrio14 said:
In the command: fastboot flash recovery FILE.ZIP...is it really FILE.ZIP that i will input or CWM.Zip or TWRP.Zip?
Click to expand...
Click to collapse
CWM.zip is what you will input. The name of the CWM.zip should match the command. Or you will need to change the zip file name to CWM.zip if it is named something else
Shreyas_Singh said:
CWM.zip is what you will input. The name of the CWM.zip should match the command. Or you will need to change the zip file name to CWM.zip if it is named something else
Click to expand...
Click to collapse
After the command: fastboot flash recovery CWM.zip.. Should i reboot my phone? ..or just turn it off and make the key combinition to access the stock recovery..or custom recovery if successful
dexterrio14 said:
After the command: fastboot flash recovery CWM.zip.. Should i reboot my phone? ..or just turn it off and make the key combinition to access the stock recovery..or custom recovery if successful
Click to expand...
Click to collapse
by the way ..how can i disable signature verification?
Hello,
1.Ive rooted my phone emui 4.1 with kingroot
2. I've flashed Official twrp 3.0.2
3. After booting in twrp I tried to clear cache but it unable to clear cache.
4. Then I've force rebooted to recovery then all partitions got unmounted (shocked)
5. So I flashed mm kang ROM then phone bricked so I thought that stock recovery may mount all partitions so I flashed stock recovery (back up)
6. Finally I'm unable to boot in stock recovery and ROM
7. What do u think guys? How to solve this issue ??
Any one faced same problem?
***Main thing is what ever I try to push a file from adb to phone in fastboot mode (ex- recovery,boot.IMG) it says "writing recovery failed:command not allowed". why I'm getting this error ?? I've unlocked bootloader too ***
Thank you!
.
Martin213 said:
Restore backup of stock rom if you able to boot in twrp.Did you try flash with huawei multitool?
Sent from Paris with love ?
Click to expand...
Click to collapse
I tried but partitions are unmounted so its not booting up,struck at Honor logo
How to solve this???
Pranav Kumar said:
How to solve this???
Click to expand...
Click to collapse
if bootloader works: download official image, use fastboot flash commands to flash all parts
otherwise
download official image from huawai, (update.app) copy to sd, boot phone with all 3 buttons pressed. it shold boot into some recovery.
endrancer said:
if bootloader works: download official image, use adb flash commands to flash all parts
otherwise
download official image from huawai, (update.app) copy to sd, boot phone with all 3 buttons pressed. it shold boot into some recovery.
Click to expand...
Click to collapse
I tired pushing recovery image to device but command says "writing recovery,failed (command not allowed)"
And I tried update.app in SD card in a folder dload tried 3button method also, but it is not booting in recovery right how it can take update?
Pranav Kumar said:
I tired pushing recovery image to device but command says "writing recovery,failed (command not allowed)"
And I tried update.app in SD card in a folder dload tried 3button method also, but it is not booting in recovery right how it can take update?
Click to expand...
Click to collapse
are you able to boot into bootloader? is "fastboot devices" command showing anything?
eddor1614 said:
are you able to boot into bootloader? is "fastboot devices" command showing anything?
Click to expand...
Click to collapse
Yes its showing
Pranav Kumar said:
Yes its showing
Click to expand...
Click to collapse
have you extracted BOOT, RECOVERY, SYSTEM and CUSTOM from huawei package?
eddor1614 said:
have you extracted BOOT, RECOVERY, SYSTEM and CUSTOM from huawei package?
Click to expand...
Click to collapse
Yes I tried but when file is being pushed to phone it says failed (command not allowed) repeats
Can you see "phone unlocked" on screen?
Yeah, sounds like locked bootloader.
Gsavas said:
Yeah, sounds like locked bootloader.
Click to expand...
Click to collapse
No bro I've unlocked bootloader
And I can see *phone unlocked" in fastboot mode
Gsavas said:
Yeah, sounds like locked bootloader.
Click to expand...
Click to collapse
have you tried flashing BOOT or SYSTEM partitions?
Pranav Kumar said:
No bro I've unlocked bootloader
And I can see *phone unlocked" in fastboot mode
Click to expand...
Click to collapse
You could try to reinstall drivers then or try a different pc.
Gsavas said:
You could try to reinstall drivers then or try a different pc.
Click to expand...
Click to collapse
Tried and I got same error(failed(command not allowed))
Do you have hisuite? If not try uninstalling drivers then install hisuite and try flashing with fastboot then. By the way does your device get recognised when you type "fastboot devices" command?
that's strange.
have you tried booting into second recovery?
eddor1614 said:
that's strange.
have you tried booting into second recovery?
Click to expand...
Click to collapse
Yes in eRecovery I can see "update recovery" after connecting to wifi it says "failed to get device info"
I ran out of options.
You might want to try all the same, using different UPDATE.APP version, like B180 or B200, using a different cable, different computer, etc.
Then next step will be Huawei support, it might be a memory/hardware problem.
Sorry man.
I was trying to install TWRP on my NX529J.
"Adb reboot bootloader command" is working but when i try to install TWRP with command "Fastboot flash recovery recovery.img", it dosent work.
It shows "waiting for devices"
Tried " fastboot devices" NO device there
I tried updating all drivers installed fastboot drivers and zte drivers but still no device found.
In developer settings OEM unlock, USB debugging is on.
and adb mode is also on with *#7678#.
Plz Help.
teji007 said:
I was trying to install TWRP on my NX529J.
"Adb reboot bootloader command" is working but when i try to install TWRP with command "Fastboot flash recovery recovery.img", it dosent work.
It shows "waiting for devices"
Tried " fastboot devices" NO device there
I tried updating all drivers installed fastboot drivers and zte drivers but still no device found.
In developer settings OEM unlock, USB debugging is on.
and adb mode is also on with *#7678#.
Plz Help.
Click to expand...
Click to collapse
sudo fastboot -i 0x19d2 boot recovery.img
sudo command not recognized in windows
anish.mvj said:
sudo fastboot -i 0x19d2 boot recovery.img
Click to expand...
Click to collapse
Sir.
i tried this command also but windows didnt recognized sudo command.
Plz any other way?
teji007 said:
Sir.
i tried this command also but windows didnt recognized sudo command.
Plz any other way?
Click to expand...
Click to collapse
That is ubuntu command.
For windows run CMD as administrator and then run
fastboot -i 0x19d2 boot recovery.img
Thanks and a little more help
anish.mvj said:
That is ubuntu command.
For windows run CMD as administrator and then run
fastboot -i 0x19d2 boot recovery.img
Click to expand...
Click to collapse
Thank you very much
Sir i upgraded my nx529j to 6.0.1, is there anyway to root it or downgrade to 5.1.1?
teji007 said:
Thank you very much
Sir i upgraded my nx529j to 6.0.1, is there anyway to root it or downgrade to 5.1.1?
Click to expand...
Click to collapse
Yes its possible.
Rooting is absolutely not required.
Follow the steps below
1. Download the latest 1.40 firmware from nubia india website support page. [Direct Link]
2. Then open the zip file and extract the recovery.img to local folder. Transfer the zip as it is to SD card
3. Goto fastboot/bootloader and run following
Code:
fastboot -i 0x19d2 flash recovery recovery.img
4. Then select reboot to recovery from bootloader menu.
5. Select wipe all application
6. Then install the downloaded zip [i hope you have already know how to do that]
It will automatically reboot.
That's it you are done downgrading
Failed
anish.mvj said:
Yes its possible.
Rooting is absolutely not required.
Follow the steps below
1. Download the latest 1.40 firmware from nubia india website support page. [Direct Link]
2. Then open the zip file and extract the recovery.img to local folder. Transfer the zip as it is to SD card
3. Goto fastboot/bootloader and run following
Code:
fastboot -i 0x19d2 flash recovery recovery.img
4. Then select reboot to recovery from bootloader menu.
5. Select wipe all application
6. Then install the downloaded zip [i hope you have already know how to do that]
It will automatically reboot.
That's it you are done downgrading
Click to expand...
Click to collapse
It says wiping failed(please wipe again or do it after reboot) everytime.
and nothing is working even app wipe or data wipe, only cache wiped works and choose from phone storage is also n ot working and sd card is also being not dtetected.
even in TWRP
anish.mvj said:
Yes its possible.
Rooting is absolutely not required.
Follow the steps below
1. Download the latest 1.40 firmware from nubia india website support page. [Direct Link]
2. Then open the zip file and extract the recovery.img to local folder. Transfer the zip as it is to SD card
3. Goto fastboot/bootloader and run following
Code:
fastboot -i 0x19d2 flash recovery recovery.img
4. Then select reboot to recovery from bootloader menu.
5. Select wipe all application
6. Then install the downloaded zip [i hope you have already know how to do that]
It will automatically reboot.
That's it you are done downgrading
Click to expand...
Click to collapse
I insatlled TWRP recovery, even in that wiping is not working. is there any way to install custom roms without rooting.
i actully installed official 6.0.1 update from their official nubia site and installed it.
teji007 said:
I insatlled TWRP recovery, even in that wiping is not working. is there any way to install custom roms without rooting.
i actully installed official 6.0.1 update from their official nubia site and installed it.
Click to expand...
Click to collapse
Dude please be clear what you want to do? Stock rom or custom?
Custom
anish.mvj said:
Dude please be clear what you want to do? Stock rom or custom?
Click to expand...
Click to collapse
.
Sir i want custom Rom. and sir now i am bricked
teji007 said:
.
Sir i want custom Rom. and sir now i am bricked
Click to expand...
Click to collapse
what do you mean by your are bricked?
If you want custom rom
Goto TWRP wipe everything
if above fails then try out following
Option 1:
Goto Bootloader mode and from that menu goto emergency recovery. Try wiping from there if successful, flash a stock rom [Kitkat] and boot to system. After first boot goto settings and reset factory settings. Then goto TWRP and wipe, it will wipe for sure. then you can install any custom rom
Option 2:
Download the oldest firmware from the nubia site [1.37] and flash recovery from there [extract the recovery from zip and flash it in bootloader]. Then use
Code:
fastboot -i 0x19d2 boot TWRP.img
to boot to twrp, don't flash it. Then goto advanced and select adb sideload. swipe to start sideload. after that open the zip you downloaded and got to
Code:
/META-INF/com/google/android/
and open updater-script with any of the text file. Delete the first line and save. update the zip.
open cmd from that folder where zip is located. then type
Code:
adb sideload NX529J_Z69_EN_NSXPK1JD00K137.zip
and press enter. let it complete and then reboot. it should boot to factory firmware. Follow the same procedure to factory reset from settings menu then flash TWRP and flash custom rom
Use the above steps. If all fails then revert back.
Thanks going to try
anish.mvj said:
what do you mean by your are bricked?
If you want custom rom
Goto TWRP wipe everything
if above fails then try out following
Option 1:
Goto Bootloader mode and from that menu goto emergency recovery. Try wiping from there if successful, flash a stock rom [Kitkat] and boot to system. After first boot goto settings and reset factory settings. Then goto TWRP and wipe, it will wipe for sure. then you can install any custom rom
Option 2:
Download the oldest firmware from the nubia site [1.37] and flash recovery from there [extract the recovery from zip and flash it in bootloader]. Then use
Code:
fastboot -i 0x19d2 boot TWRP.img
to boot to twrp, don't flash it. Then goto advanced and select adb sideload. swipe to start sideload. after that open the zip you downloaded and got to
Code:
/META-INF/com/google/android/
and open updater-script with any of the text file. Delete the first line and save. update the zip.
open cmd from that folder where zip is located. then type
Code:
adb sideload NX529J_Z69_EN_NSXPK1JD00K137.zip
and press enter. let it complete and then reboot. it should boot to factory firmware. Follow the same procedure to factory reset from settings menu then flash TWRP and flash custom rom
Use the above steps. If all fails then revert back.
Click to expand...
Click to collapse
Thank you very much sir.
Can i contact you by any other means? whatsapp or any other
teji007 said:
Thank you very much sir.
Can i contact you by any other means? whatsapp or any other
Click to expand...
Click to collapse
Check your private message
adb sideload not working
anish.mvj said:
what do you mean by your are bricked?
If you want custom rom
Goto TWRP wipe everything
if above fails then try out following
Option 1:
Goto Bootloader mode and from that menu goto emergency recovery. Try wiping from there if successful, flash a stock rom [Kitkat] and boot to system. After first boot goto settings and reset factory settings. Then goto TWRP and wipe, it will wipe for sure. then you can install any custom rom
Option 2:
Download the oldest firmware from the nubia site [1.37] and flash recovery from there [extract the recovery from zip and flash it in bootloader]. Then use
Code:
fastboot -i 0x19d2 boot TWRP.img
to boot to twrp, don't flash it. Then goto advanced and select adb sideload. swipe to start sideload. after that open the zip you downloaded and got to
Code:
/META-INF/com/google/android/
and open updater-script with any of the text file. Delete the first line and save. update the zip.
open cmd from that folder where zip is located. then type
Code:
adb sideload NX529J_Z69_EN_NSXPK1JD00K137.zip
and press enter. let it complete and then reboot. it should boot to factory firmware. Follow the same procedure to factory reset from settings menu then flash TWRP and flash custom rom
Use the above steps. If all fails then revert back.
Click to expand...
Click to collapse
Sir, its been 5 mins its "starting ADB sideload feature" but nothing
adb sideload failed
anish.mvj said:
Check your private message
Click to expand...
Click to collapse
Sir ,
ADB sideload failed
teji007 said:
Sir ,
ADB sideload failed
Click to expand...
Click to collapse
Hi how did your device visible in fastboot devices?
I installed adb drivers and all but my device is not listed in fastboot devices..
It is being listed in adb devices but not on fastboot devices. Can you help me with this?
---------- Post added at 08:51 PM ---------- Previous post was at 08:50 PM ----------
teji007 said:
I was trying to install TWRP on my NX529J.
"Adb reboot bootloader command" is working but when i try to install TWRP with command "Fastboot flash recovery recovery.img", it dosent work.
It shows "waiting for devices"
Tried " fastboot devices" NO device there
I tried updating all drivers installed fastboot drivers and zte drivers but still no device found.
In developer settings OEM unlock, USB debugging is on.
and adb mode is also on with *#7678#.
Plz Help.
Click to expand...
Click to collapse
Hi how did your device visible in fastboot devices?
I installed adb drivers and all but my device is not listed in fastboot devices..
It is being listed in adb devices but not on fastboot devices. Can you help me with this?
I am using Asus zenfone 3. And I have installed TWRP in it. But the phone is not booting to system (os) . And the TWRP I installed , the touch does not work for it. If I boot to system, it shows the boot logo and turns off. What can I do now?
LavanTech said:
I am using Asus zenfone 3. And I have installed TWRP in it. But the phone is not booting to system (os) . And the TWRP I installed , the touch does not work for it. If I boot to system, it shows the boot logo and turns off. What can I do now?
Click to expand...
Click to collapse
To me it seems that phone's boot-loader is got corrupted. Not unusual when installing TWRP.
jwoegerbauer said:
To me it seems that phone's boot-loader is got corrupted. Not unusual when installing TWRP.
Click to expand...
Click to collapse
Do u have any solution??
LavanTech said:
Do u have any solution??
Click to expand...
Click to collapse
Did you have enabled in Developer Options the USB debugging & OEM unlock features before the device bricked.?
LavanTech said:
I am using Asus zenfone 3. And I have installed TWRP in it. But the phone is not booting to system (os) . And the TWRP I installed , the touch does not work for it. If I boot to system, it shows the boot logo and turns off. What can I do now?
Click to expand...
Click to collapse
Also I cannot install with flash tool , I'm getting unhandled exception error!
jwoegerbauer said:
Did you have enabled in Developer Options the USB debugging & OEM unlock features before the device bricked.?
Click to expand...
Click to collapse
Ya! I eabled usb debugging , unlocked bootloader also OEM unlock.
LavanTech said:
Also I cannot install with flash tool , I'm getting unhandled exception error!
Click to expand...
Click to collapse
Re--flash Stock Recovery.
jwoegerbauer said:
Re--flash Stock ROM.
Click to expand...
Click to collapse
Both are enabled!!!
LavanTech said:
Both are enabled!!!
Click to expand...
Click to collapse
I've edited the cited post. Re-read.
jwoegerbauer said:
Re--flash Stock Recovery.
Click to expand...
Click to collapse
I have stock rom downloaded, which software can I use to flash ?? Pls give any link to download.
jwoegerbauer said:
I've edited the cited post. Re-read.
Click to expand...
Click to collapse
Pls provide me link for downloading stock recovery and software to flash!
LavanTech said:
I have stock rom downloaded, which software can I use to flash ?? Pls give any link to download.
Click to expand...
Click to collapse
To get rid off of TWRP you flash Stock Recovery.
I think the correct command sequence is
Code:
adb reboot
adb devices
adb reboot bootloader
fastboot devices
fastboot flash recovery <STOCK-RECOVERY-IMAGE-FILE>
fastboot reboot-bootloader
fastboot erase cache
fastboot reboot
Search for the appropriate Stock Recovery image by yourself. GIYF ...
If you instead want to re-flash Stock ROM then the correct command sequence would be
Code:
adb reboot
adb devices
adb reboot bootloader
fastboot devices
fastboot flash-all <STOCK-ROM-IMAGE-FILE>
fastboot reboot
Try going back to stock (Fastboot/download mode/Odin, depending on the device)
Thank You!
I have successfully went to fastboot mode and flashed the stock rom! Thank you for your support!! ?? The phone is working now in the Android 7.
BUT,
now if i install twrp custom recovery, i don't know what happens, after restarting to system i cannot boot to system , it just shows the boot animation and just goes off or sometimes it boots to fastboot mode.
then if i flash the stock rom again using the sd card in the the default recovery mode after flashing that stock recovery, it works again.
Also if I install TWRP recovery, TWRP could not install any Roms ! it just says that Updater process ended with error 6 or 7 randomly.
So, how do I install custom recovery and roms in it now?
LavanTech said:
So, how do I install custom recovery and roms in it now?
Click to expand...
Click to collapse
Assumed the TWRP.IMG you use is the correct one, then there is no need to install TWRP recovery, booting into it is fully enough - this will preserve device's Stock Recovery
Code:
fastboot devices
fastboot boot <TWRP.IMG>
The TWRP is booting perfectly! But if I install any zip file i.e ROM or Mods, it says that Updater process ended with error 6 or 7!!
This is the problem with TWRP.
And, if install TWRP in the phone, then restart the phone , if I restart to system, it doesn't work ,just it shows the boot animation and turns off.
LavanTech said:
The TWRP is booting perfectly! But if I install any zip file i.e ROM or Mods, it says that Updater process ended with error 6 or 7!!
This is the problem with TWRP.
Click to expand...
Click to collapse
This is not TWRP recovery related, but it's related to the Custom ROM zip-file you try to flash: The ROM zip-file you try to flash isn't made for your device.
jwoegerbauer said:
This is not TWRP recovery related, but it's related to the Custom ROM zip-file you try to flash: The ROM zip-file you try to flash isn't made for your device.
Click to expand...
Click to collapse
I'm trying to flash ASUS ZENFONE 3 LINEAGE OS 16
MY DEVICE : ASUS ZENFONE 3 ZE552KL
THE FILE : https://mirrorbits.lineageos.org/fu...age-16.0-20200727-nightly-zenfone3-signed.zip
I am using the file which is for my device only! But it is not working, what should I do?
LavanTech said:
I'm trying to flash ASUS ZENFONE 3 LINEAGE OS 16
MY DEVICE : ASUS ZENFONE 3 ZE552KL
THE FILE : https://mirrorbits.lineageos.org/fu...age-16.0-20200727-nightly-zenfone3-signed.zip
I am using the file which is for my device only! But it is not working, what should I do?
Click to expand...
Click to collapse
Start a new thread ...
Here is the new thread
Here is the new thread :- https://forum.xda-developers.com/android/help/twrp-issues-asus-zenfone-3-t4145317
Code:
/*
*Disclaimer
*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Working :
Boot
Decryption data
Flashing
Android 12/13 support
Not working :
Vibration (involve driver loading which i'm inexperience about this)
otg
Supported devices :
Sony Xperia 1 III
Sony Xperia 5 III is currently work in progress
Flashing Process :
Code:
1. Power off device
2. Hold Vol + and plug it into PC
3. fastboot getvar current-slot
3. fastboot --set-active=(inactive slot)
4. fastboot flash boot_(inactive slot) (path to boot.img)
5. fastboot reboot recovery
6. Once you're done head to the reboot menu and change to the other slot and reboot back to system
Download : Link
Special Thanks :
- Hellobbn for testing and kernel
- @Ainz_Ooal_Gown for testing
- @Sakuu for testing and instruction
- @Miustone for some hints, and testing
Source :
Twrp Device tree
Kernel Source
Donation : Paypal
reserved
Good times ahead for Xperias!
Let's see if we also get Stock ROMs again from someone...
There are also some AOSP ROMs on the Way. Ez installs with TWRP for everyone
Miustone said:
Good times ahead for Xperias!
Let's see if we also get Stock ROMs again from someone...
There are also some AOSP ROMs on the Way. Ez installs with TWRP for everyone
Click to expand...
Click to collapse
Yeah indeed he did it great and i thought you was working on it also but suddenly we hear none from you bro.
Miustone said:
Good times ahead for Xperias!
Let's see if we also get Stock ROMs again from someone...
There are also some AOSP ROMs on the Way. Ez installs with TWRP for everyone
Click to expand...
Click to collapse
is eally will be normally custom rom for this phone?
Sakuma_Eitarou said:
is eally will be normally custom rom for this phone?
Click to expand...
Click to collapse
* i didn't own this phone, all of the results are come from a lot of testers
and yeah, custom rom already happened. just in testing
loipuru said:
and yeah, custom rom already happened. just in testing
Click to expand...
Click to collapse
okay
How to enter recovery when boot up ?
Edit: this step is kinda unclear,
4. fastboot flash boot_(inactive slot) (path to boot.img)
i dunno what todo and get this:
unknown partition blablabla
please help
Pandemic said:
How to enter recovery when boot up ?
Edit: this step is kinda unclear,
4. fastboot flash boot_(inactive slot) (path to boot.img)
i dunno what todo and get this:
unknown partition blablabla
please help
Click to expand...
Click to collapse
Pretty sure you don't have Google's ADB drivers installed
Sakuu said:
Pretty sure you don't have Google's ADB drivers installed
Click to expand...
Click to collapse
Oke and where can i get them, any link ?
Pandemic said:
Oke and where can i get them, any link ?
Click to expand...
Click to collapse
From this thread https://forum.xda-developers.com/t/...re-and-gsi-rom-flashing-without-twrp.4344371/
You should honestly have both the Google Driver's and the Sony Xperia 1 III driver's....
Thanks and h
Ainz_Ooal_Gown said:
From this thread https://forum.xda-developers.com/t/...re-and-gsi-rom-flashing-without-twrp.4344371/
You should honestly have both the Google Driver's and the Sony Xperia 1 III driver's....
Click to expand...
Click to collapse
Thanks and howto ener twrp when boot up, pressing the volume key - or + ?
Pandemic said:
Thanks and h
Thanks and howto ener twrp when boot up, pressing the volume key - or + ?
Click to expand...
Click to collapse
I haven't figured that one out myself, what I have been doing while testing is while connected to PC doing adb reboot recovery
Ainz_Ooal_Gown said:
I haven't figured that one out myself, what I have been doing while testing is while connected to PC doing adb reboot recovery
Click to expand...
Click to collapse
Oke well some people dont have a pc whole the time but i will figure it out.
Pandemic said:
Oke well some people dont have a pc whole the time but i will figure it out.
Click to expand...
Click to collapse
well you can try the default method and see if it works https://www.hardreset.info/devices/sony/sony-xperia-1-iii/recovery-mode/
Ainz_Ooal_Gown said:
well you can try the default method and see if it works https://www.hardreset.info/devices/sony/sony-xperia-1-iii/recovery-mode/
Click to expand...
Click to collapse
I think you guys understand me well... What must you set here ?
4. fastboot flash boot_(inactive slot) (path to boot.img)
By (inactive slot) and (path to boot.img) ?
I installed all the CORRECT drivers so all is good but i dont get it what i need to type what i explained yet between the (...)
and fastboot devices should see the phone
Pandemic said:
I think you guys understand me well... What must you set here ?
4. fastboot flash boot_(inactive slot) (path to boot.img)
By (inactive slot) and (path to boot.img) ?
I installed all the CORRECT drivers so all is good but i dont get it what i need to type what i explained yet between the (...)
Click to expand...
Click to collapse
Inactive slot is usually b on stock so it's fastboot flash boot_b and path to boot img is where you downloaded TWRP -_-
Sakuu said:
and fastboot devices should see the phonei
Inactive slot is usually b on stock so it's fastboot flash boot_b and path to boot img is where you downloaded TWRP -_-
Click to expand...
Click to collapse
Ooh yes, thankzz anyway -___-
Pandemic said:
Ooh yes, thankzz anyway -___-
Click to expand...
Click to collapse
if you put twrp into adb folder and run terminal/cmd/powershell from that folder then you can just do fastboot flash boot_b twrp.img you just need to rename boot.img to twrp.img
Ainz_Ooal_Gown said:
if you put twrp into adb folder and run terminal/cmd/powershell from that folder then you can just do fastboot flash boot_b twrp.img you just need to rename boot.img to twrp.img
Click to expand...
Click to collapse
Great this what i exactly looking for and it works and btw i figured also out howto reboot into recovery.
When the device boots up keep pressing volume down
And when you want to reboot to system, tap on slot a and boot to system otherwise it keep stay on the b slot and you will reboot into twrp again, so tap on slot a before you boot into system 🫡