Hi guys!
A few months ago my phone dropped and my LCD Screen got broken. I ordered a new screen but I cannot find a tutorial on how to repair it!
I am totally a disaster what phone repairing belongs, so does anyone want to make a picture by picture guide?
I would really appreciate it!:good:
Yeah, I'm just like you. I contacted​ Umidigi support, they told me to send them a video of my broken glass, then they'll help me.
Related
Hi All,
Im having some problems with my Evo 3D. It was scratched out of nowhere by just sitting in my backpack MP3 slot. I found some dust on the screen (most likely thats the cause of the scratches). I have 2 medium scratches and a lot of minor/medium. The problem is that I am really getting upset when I look at my screen and I decided to accept it condition no more. I have 2 questions (For the first one I am pretty sure of the answer, but still I will ask it).
First. Are these scratches covered by the warranty? The obvious answer is no of course, but I am wondering - since it is with the "mighty" Gorila Glass, how did it got scratched without even dropping it... So Im thinking, is it possible that the warranty will cover this?
Second. If the answer of the above question is NO - I will change my digitizer. I chose to change the digitizer because it costs 10 pounds, comparing with the whole screen which is 70-80 on ebay. There is something that bothers me though. I am afraid that even a slight misalignement will cause troubles while using the phone and missclicking some stuff... Also I am afraid that dust might get between the screen and the digitizer while Im doing that.
I hope there is someone that already done this (and I mean digitizer only change) that will be able to help me with some advices and/or techniques. I am technocal guy, so following your instructions wont be a problem. Its just I haven't change Evo 3D digitizer before and I want to have proper preparation.
Any advises will be greatly appreciated.
Thank you.
Have a look at this:
http://forum.xda-developers.com/showthread.php?t=1560037
I posted some stuff on the last page too so you can go to that.
HTC might fix it for you, probably at a cost, you can give them a ring and see if they can help
Other than that, just read through the link i gave, alot of good info there that will help you replace the digitizer. Good luck!
I dropped my galaxy S2 and the screen flickered and went black and started vibrating. I've bought a new lcd replacement, but after some thought I'm wondering if thats the problem. What do you guys think?
Without looking at it/being there with you, how would we know ? If you're not confident replacing it yourself, pay a local mobile repair shop to do it. Obviously given you've already bought the LCD, you'll only have to pay for labour.
What I think is to temporary attach the new screen and have a look.
A guy shows you what to do in the 29 minute video on you tube.
theunderling said:
What I think is to temporary attach the new screen and have a look.
A guy shows you what to do in the 29 minute video on you tube.
Click to expand...
Click to collapse
Thanks. Yeah, that's what I'm going to do. I've fixed lots of phone before, replacing screens so its not a problem. I was just wondering dose it sound like the screens dead when it vibrate's constant when trying to turn it on, or could it be the board. I'm just thinking all this after ordering the screen lol
Hey there. Recenly i broke my Digitizer Touch Screen Glass i remove it and change it with another one. I search on youtube for the instructions and i did everything step by step. After that my phone touch isn't working.I even change software.. Suggest me people,
Thanks in advance!
Looks like you didn't changed it right
damn. i just ordered the parts and will attempt this when the parts arrive. so did you have success or what?
Hi viewers, as you can see in the image attachment there, i'm just wondering what i am dealing with here so i kinda need your help telling me what that is, its definitely internally...the Lcd is fine, and i can still pull down the status bar when i touch over it... i don't really know how this happened and it bothers me, so yeah need some info >_<
Oh and if possible direct me to a link i need to buy a spare part to replace anything... thank you very much, appreciate your respone
vince2709 said:
Hi viewers, as you can see in the image attachment there, i'm just wondering what i am dealing with here so i kinda need your help telling me what that is, its definitely internally...the Lcd is fine, and i can still pull down the status bar when i touch over it... i don't really know how this happened and it bothers me, so yeah need some info >_<
Oh and if possible direct me to a link i need to buy a spare part to replace anything... thank you very much, appreciate your respone
Click to expand...
Click to collapse
Was the phone dropped as it looks like some damage on the top corner there or did a liquid get into the phone as it kinda looks like the digitizer got separated from the lcd screen as i had a phone that kinda looked like that and salt water got into it and salt water will really work things over faster.
But if the digitizer did lift it would have to be separated from the lcd screen and put back down again which is not a fun job to do as i believe there is a special film in between the digitizer and lcd screen that would have to be replaced, if not careful when separating the two the lcd screen can be broken very easy, i have replaced the whole digitizer and screen as one unit without any problems..but i never tried to separate the digitizer from the lcd myself..but if the whole digitizer + screen have to be replaced the assembly are a little over a $100 US.
But by your pic this is all i can suggest at this time as if the digitizer itself has to be replaced that is up to you as that is a more delicate job then just replacing the whole digitizer+lcd screen assembly.
Oh i'm very sorry man for late reply, busy lately... anyway thank u very much for your response and what i need to know...well i'm probably just going to leave it like that for now :/ i've all checked around for that digitizer+Lcd together, really expensive... so yeah thx again
Hi, I'm new here.
Couple days ago I dropped my phone and now my Lenovo K900 has broken glass. Everything is ok with touch screen, I just have visual discomfort when I'm using it. If touch screen is fine, do I have to replace glass with digitizer (around 50$) or just new glass (15$) will be good?
Second question: is it a risky operation? We don't have an authorised support for K900 in our country, so I would have to give this job to regular phone service.
Thanks for the help guys.
broken glass
did you replace the screen ?
I am from sweden.. k900 did not came to sweden..
I replaced my screen for 1 week ago...
i just did it... digitizer, not only the glass.
It is a risky operation but there's a good russian video out there : lenovo k900 digitizer in google and then the 3th video. Begin is orange. (cannot post the link because I'm a junior member)
maybe not related, but since yesterday my microphone stopped working during calls only.
For me not a hardware issue, so you could give it a try.
Don't forget to remove your sim card slot when removing your broken digitizer!
good luck and send me a message when you encounter problems.
Kevin