My shot at my favorite watch face - Moto 360 Dials.
Advantages:
1. I own a Moto 360 (2015) version, however with this one I get the same face in Ambient mode too! Please be wary of affect on watch battery life though. I still end the day with around 30% battery left, however that might vary for you.
2. Digital time and day and date
3. Non-Moto 360 owners with a round Android Wear smart watch can use this watch face.
If I make further changes such as font, adding the "moto" text, new watch hands etc, I'll share it again.
Enjoy and hope you like it!
http://pujieblack.com/share/?scv2=-...anZKULs1zEE_8ExQpaWWQ2HmnIY8K9bHZu2YEKxyXVNoA
https://facerepo.com/app/faces/details/moto-360-dials-15c819f1fc7
Download Pujie Black : https://goo.gl/JOfgMO
#AndroidWear #WatchFace #PujieBlack
Related
I was excited when my LG G Watch R updated to 5.0. I instantly went to work on an elegant, simple, and clean looking watch face. I'm here now to see what others think of it, before a release on the play store. Please feel free to add feedback.
This is an analog watch face optimized for a round watch (but should work on square ones), with date and compass laid out nicely, on a dark gradient. I believe I've followed all of googles guidlines on the new API, and I believe this should even work on devices with "Low Bit Ambient Mode", although I can't emulate that, so I can't confirm that until someone posts with results.
If there is a sideways figure 8 in the center of your compass, you need to recalibrate your magnetometer. Swing your hand wildly in a sideways figure 8 while the compass is visible to calibrate your device (yes, really....).
Install the apk to your phone and give 10 minutes for the apps to sync. If you're feeling particularly impatient, you can go to the wear companion app (on your phone), and select " Resync Apps" for a more speedy install.
closed per op reuest
Unfortunately, before buying this band, I had made a lot of research and reading people's reviews on this device but there are just simple touch and go writings which do not really provide a better understanding for people to understand this Smartband and its potential. I do hope I could rejoy whoever using this smart device with its pros and care its cons.
Design
Just like the Fitbit and Jawbone, SWR10 was well-known with its minimalistic yet futuristic looking. Simple structure with high quality strap which is amazingly comfortable to be worn. The textured finishing with a silver colour button made the smartband looks simple and premium. The texture difference between top and bottom of the strap brought a unique outlook when it was came with colours other than black. Featuring a feather-weighted core (main part) did really made users to forget its existence occasionally.
Pros
As rated IP58, the smartband was a water resistant device which brings no fear when you wearing it for bathing and swimming. But NOT FOR SEAWATER! For dust proof aspect, it was not perfect to be burried into fine sand. Checkout the IP rating list for more details.
SWR10 was a life companion as it works perfectly with Lifelog app when both of them not as simple as just a fitness tracking combination, but they do record down your daily activities like the moment when you USING YOUR PHONE for social networking and entertaining. It records the moment when you trigger the camera button and what the photos you take, and even more. Just a double presses on the button at the side of the core, the smartband capture your LifeBookmark and send to the Lifelog to bookmark your interesting moment with location.
The sleep tracking amd Smart Alarm were wonderful for me. Using these features, I felt that now I am able manage my sleep better and wake up fresh every morning. Inspecting the trend of my sleeps, I know my body well and will try out a better relaxation method when preparing to sleep so that I could really rest my body with a longer Deep Sleep phase.
Vibration feature does really helps me a lot at pushing notification from phone to my smartband and also wake me up by vinrating on my wrist. When I kept my phone in my bag and go to the kitchen, I can know when there is an incoming call as the smartband will vibrate to notify me. Now I never miss out any call since using smartband!
With the aid of different smartband extension apps, you can remote your phone even better than other brands. Example, when activated the Media Player mode, a single tap after pressing the button of the smartband once, Music app will open and plays the songs! With Smart Camera Extension, taking a Groupfie will be so easy like never! Just press the smartband button and a single tap will trigger the shutter!
Cons
Overall, this smartband has some cons as below
1) Not as accurate as pro tracker like Jawbone Up or Fitbit or Garmin, but since it is activity. tracker and life recording device, I could say it worth the drawback. As even it was not a perfect steps counter, but it still did its job to show whether you are more active than yesterday!
2) Limited functionality, might just for now since no API was available at this moment, this smartband just works for different tasks without allowong you to customize own vibrationpatterns or LED indicating patterns. Without a display was the biggest drawback...But who cares? Even you are notified or able to see the content of message, you still need to take out your phone and reply, so it makes no difference unless you willing to buy the expensive Samsung Gear smartwatch or Apple Watch or others.
3) Remote media player by tapping on smartband was not flawless last time, but with new updated firmware, it works better with some practices. Practice makes perfect!
Extended functionality
The word "functionali-" was not end with "ties" is because by now, there is only an app called Smartband Notifier which is available at Google Play Store which works with Tasker to produce customized number of vibration with customized interval between vibration for different apps' notification. Without display or LED pattern, at least, you can determine which app is notifying you without a glance on your phone.
Suggestion
1) Time feature
Since smartband has three LEDs, I suggest developer to make a gesture like Miband to show the current time. Like example, 1 o'clock, LED A flash once and so on for 2 and 3 o'clock with flashing of LED B and C respectively. Add once more for a cycle like flashing LED A twice for 4 o'clock, understand? And for 10,11 and 12, set the LEDs to flash alternately with combination of two LEDs : 10 (x_x) , 11 (xx_) , 12(_xx). Dividing 60minutes into four quaters and light the LEDs with different patterns to tell the quater might be a simple solution for the minutes.
2) Enhance the media control by flashing the LEDs but not just remain light up to tell the users whether their taps on the smartband are registered or not. A beep sound also can be played on the phone to tells the users that their phone is responding with the taps. Also, adding volume control by movement of wrist as with the 3D accelerometer, the smartband can tells the phone that users is turning their wrist clockwise to increase the volume. This situation is just similar to the game which designed for Smarband (forgotten the name of it, is a bombing airplanes game).
This is my step-by-step reviews and I hope the developer will see these and modify the smartbamd firmware to fully extend its potential to be not just a simple band! Goodluck everyone!
Forgive my bad grammars but I am learning to be better =) Correct my grammars before sharing if you willing to do so =D
Goodjob bro.informing post.i'm waiting for new band
Thanks man, do share it so developers might give it a shot to enhance the band.
Is there a good watch face that's free and shows you the watch and the phone battery level? There is a nice Flip Watch app, but I don't really like the looks of it plus it's not free. Would it be easier to reprogram one of the stock faces to do that? If you know any watchface making tutorials I'd appreciate a link.
Side question: for the watch face I use when the screen is off and I flick the watch to show time the time keeps moving every minute. Any way to disable that as I find it annoying?
Thank you
I wasn't in market for smartwatch, but Fit2 automatically came with a recent upgrade to Sammy Note 7 (both are sweet!). Is there any way to force the detailed watch face to stay? I know it could potentially be a battery hog, but I haven't found one yet where I like both the full screen and the scaled back screen. Thanks!
~Vol
...Settings, Display, and ENABLE - Watch Always On...
I have that one set. There are just 2 screens. When I shake my arm, a detailed watch face pops up with steps, calories, heart rate, etc. Then after a few seconds it switches to a scaled back screen that just shows digital time. I want the detail screen to stay.
ok...this seems like you need a Watchface which just displays the DETAILS of the 24H Log. As you said the display will default back to the WatchFace you have selected. Since the 24H Log isnt a watchface, you need one which just specifically displays the DETAILS info.
I suggest you check out the Galaxy Store, and see if there is something which fits your needs. I have over 300 to select from....i noticed some targeted specifically for fitness group, and prefer to see all their vitals on the watchface. Good luck, sorry couldn't be any more useful.
Exactly, the "watch always on" settings usually display a lighter face.
Samples
Couple of pictures attached. This is an aftermarket downloaded watch face called "Color Circles" or something like that. "Full" is the version I'd really like to see all day, but "Scaled" is what shows after about 5-10 seconds of inactivity. I can only think of one workaround. Does anyone know of a similar aftermarket selection that has a detailed face for the scaled back mode, or does the firmware in the watch only have a minimal amount of fields for designers to pick? Maybe it's a global limitation.
~Vol
So friends i recently bought OPPO watch 41mm everything is amazing about this product except its battery life without power saving mode. While using Bluetooth connectivity only i am Getting 6 to 8 hr of battery backup and need a to charge it 2,3 times daily with average usage.
at flip cart site most of users are complaining about the same so i researched some points and applied to watch and i. Getting satisfactory whole one day battery life on this watch while doing day to day activities like calling, messeging and health activities.
So you need to follow simple steps as below
1)Update wear os to latest one:
Sonwatch comes with 2.18 when we unbox it so immediately after unboxing watch batyery life gets discharges very quickly you have to fully charge it an dthen go to setting> about>system update and update it to latest 2.19 wear os version.
2)Disable all transition animations :
To do this you need to enable developers option go to settings >about >click 8 times on build number
Now go to developers option and disable all transition animations.
3)Disable all gestures :
So to do this go to settings >Personalization >disable tilt to wake, touch to wake and wrist wake
So tha main question arises how to use watch to hekc time and day to day activities for that you need to enable AOD(ALWAYS ON DISPLAY) and to wake the screen use power button. So AOD drains battery for that we need to enable Low bit ambient mode to enable this go to settings >developers option and then go to wear os developer option and enable low bit ambient mode
4)Disable ok google detection
5) always keep wifi, nfc, gps connectivity off use them at emergency only
6) Use pixel minimal watch face:
This is minimal watch face which shows main informative text in white color and with balck baground which save battery life on amoled screen
Link of wath face
https://play.google.com/store/apps/details?id=com.benoitletondor.pixelminimalwatchface
By apply above tips i am getting whole day battery life on my oppo watch 41mm
I have created small video tutorial lets take a look on it also
https://youtu.be/1fgBO3swY80