Hello guys! As the title says, I need the firmware of Allview P5 Lite (not to be confused with Life), which comes with MT6735M, because I've made some changes without backing up stock system.img and now I need it, because camera isn't working anymore, and I can't get rid of the default launcher, which isn't actually a launcher, it's some testing app (DwBoardTest.apk). Don't send the Stock Rom from needrom site, because that's the one I used to un-brick my phone.
Additional : I used the unpack repack tool from xda to modify system.img in order to get rid of DwBoardTest.apk, but when flashing the modified image, the phone won't boot up. It only boots up with the system image unmodified. Any ideas?
Edit: if not the whole ROM, at least system.img
Did you managed to root the phone? How?
hello
have you managed to fix it ?
thanks
I tried with KingoRoot,KingRoot,(Srsroot on virustotal.com say it is full of virus).I can't find official stock ROM.
Related
Does anyone have or can get the stock rom of Alcatel OT Flash 6042D? Thanks.
stil looking for the same stock rom. Does anyone have it? Thanks.
reboxyde said:
stil looking for the same stock rom. Does anyone have it? Thanks.
Click to expand...
Click to collapse
let's discuss this here:
http://forum.xda-developers.com/android/help/root-request-alcatel-one-touch-flash-4-t2949466
Hi,
I tried uploading back up of rom taken from SP flash tool but file size is huge around 1.6GB. Alternatively CWM back up is small size of 333MB so you can use cwm back up to flash your phone. the link to download rom is as follows: -
https://drive.google.com/uc?export=download&id=0B6hkMCWEBsEPQy03SnBWNlNLUXM
Just extract the folder and store in your sd card. Do not overwrite or rename any file. than flash cwm recovery using sp flash tool. use this guide to flash cwm if you don't how how to do the same:-
for rooted phone: -
http://www.theandroidhow.com/2014/0...cwm-recovery-any-mediatek-android-device.html
for unrooted phone: -
http://www.theandroidhow.com/2014/05/how-to-make-flash-cwm-recovery-without.html
if you need scatter file or stock recovery file for onetouch flash than you can download it from here: -
https://drive.google.com/uc?export=download&id=0B6hkMCWEBsEPU090UGtYT05hWnM&authuser=0
Hello. Did you check if the bakup is working? Did you do a recovery from it at least once? I tried to install your backup on a TCL S720 phone which is the same phone (95% sure....) and it didn't work. It said on CWM recovery "Flash failed". I want to mention that the rom files you uploaded should be in the root of the zip file not in a directory. I've archived the file directly in the root and it didn't work. Any idea? Could you upload the whole rom, the 1.6 GB one and paste the link here please? I know many people is looking for it. Thank you.
tcl s720
I restored this nandroid from alcatel ot flash 6042d on to my TCL S720
The restore process went well,no errors,but the rom is not booting it is in a boot loop.
I tried substituting boot.img from tcl s720 but no luck,I even tried patched boot.img,no luck either.
So,I hope someone with mad porting skillz will be able to port this alcatel 6042d rom to tcl s720.
@jhalife
If you can upload the whole backup 1.6gb made with sp flash tool I will be very grateful and many other TCL S720 will be grateful also
Thanks
Hi, i can do that but i will take sometime. atlst 2 wknds. Will try doing that this saturday my net speed is slow so giv me smtime
Need CWM recovery file
jhalife said:
Hi,
I tried uploading back up of rom taken from SP flash tool but file size is huge around 1.6GB. Alternatively CWM back up is small size of 333MB so you can use cwm back up to flash your phone. the link to download rom is as follows: -
*url*
Just extract the folder and store in your sd card. Do not overwrite or rename any file. than flash cwm recovery using sp flash tool. use this guide to flash cwm if you don't how how to do the same:-
for rooted phone: -
*url*
for unrooted phone: -
*url*
if you need scatter file or stock recovery file for onetouch flash than you can download it from here: -
*url*
Click to expand...
Click to collapse
Hey Jhalife,
Could you send the CWM Recovery because my phone is bricked and I can't possibly make a custom recovery at this stage. I have a TWRP so I can install CWM Recoveries.
Good day members and Developers of XDA,
After days of googling and searching through forums and tutorials, I decided to make this thread to introduce my Delima.
I have this new Huawei y6 pro TIT U-02 which is quite different from Huawei y6 pro TIT AL00 (4G LTE). Difference in partitions and ROM images. However, I wanted to root my phone so as usual I started the easy way using renowned root apps, no luck though. Next step was to flash recovery. To port the suitable recovery I needed to dump my stock boot.img and recovery.img files out of my stock firmware. The irony is that I needed Root access in order to use the adb shell su (dd or cc). So I looked around for a way to pull my firmware images without the need of root. So I found the read back of SP Flash tool which is quite useful and great way to dump img. Yet I faced another problem that is of battery as it is not removable therefore the SP Flash tool reads my phone for short time before it starts charging and show the battery icon which disconnects the adb driver of the phone and connects another device (the phone in charging mode is detected as another device not readable by SP Flash tools). Quanciquantly, I was unable to get stock img by any means.
NOW I have my stock firmware (downloaded from Huawei site) and I want a way to extract boot.img and recovery.img. I extracted the lollipop update.zip and found a boot.img which is not that of booting the device. Ten I extracted the "system.new.dat" file and found nothing there.
All I need now is the stock boot.img and recovery.umg of my TIT U-02 or a way to dump them. I'de really appreciate any kind of help.
Sorry for long post I had to tell full story in order not to get solutions I already tried and make my issue clear.
Hello fellow xda members helpers and developers
I need to downgrade my Phone from Android 7 Build: C432B370 to Android 6
What do I need to make sure of in my Huawei P9 Lite Android 7 Emui 5 before following the Rollback/software upgrade procedure described in the respective Zip files.
Do I need to unroot and relock ? .. If yes which version of recovery or TWRP do I need.. if I am going to rollback.
I am a little hesitant at the moment becouse I managed to get into a bootloop yesterday by just flashing recovery_stock .
I am guessing it is becouse I unawarely flashed the wrong recovery_stock(?)
Recovery/Fastboot mode were not availiable - and then tried to flash the rollback via 3 button method.. which of course did not work.
( In case you are wondering how I managed to fix this: I let the battery drain to 0% - this broke the loop - afte the fifth try I managed to reset it with volume up + power all the way through booting)
So now I am back to square one..
Thank you
ok so I managed to fix this by myself: The problem I had was, I had a corrupted/wrong recovery on my Android 7.
So what I did was, I checked which build I excactly had .. in my case C432B370 ... downloaded the full rom. Extracted the stock recovery.img with "HuaweiUpdateExtractor" and flashed it.
Then I did the normal rollback procedure with both update.app files.
Had to unlock and root it once more... ( this time with the correct twrp) and voila it works.
So what do we learn?: dont trust simple internet guides if they not offer informations on file versions they offer ... they may not use the correct versions for your phone.
thrad can be closed or deleted
thanks for looking
hey! i accidentally deleted a backup for my device and now i have no system to boot off of
are there any roms available for mya-l11? all the ones i see on this sub are for the 2015 models. thanks
lbxda said:
hey! i accidentally deleted a backup for my device and now i have no system to boot off of
are there any roms available for mya-l11? all the ones i see on this sub are for the 2015 models. thanks
Click to expand...
Click to collapse
I could not find any custom Roms for your device.
I could find an stock Rom for the Mya-l41 trough.
Here is an link: https://mega.nz/#!wKpT1ZaS!CV-2E4sNnUwIurskAdqCDpDawWlZD2UeABtSELk_ffc
That should be an update.app or an flashable zip.
You may get Huawei Update Extractor and extract the system.img and boot.img of the update.app
After that flash system.img and boot.img from fastboot.
Warning. This may soft brick your device.
Good luck.
If i helped press the Thanks button
Thespartann said:
I could not find any custom Roms for your device.
I could find an stock Rom for the Mya-l41 trough.
That should be an update.app or an flashable zip.
You may get Huawei Update Extractor and extract the system.img and boot.img of the update.app
After that flash system.img and boot.img from fastboot.
Warning. This may soft brick your device.
Good luck.
If i helped press the Thanks button
Click to expand...
Click to collapse
i was able to flash the boot and recovery image, but i couldnt flash the system image
lbxda said:
i was able to flash the boot and recovery image, but i couldnt flash the system image
Click to expand...
Click to collapse
Does it show an error or anything?
Fastboot flash system system.img
ok, so i found what i thought was a stock rom for my device on some spanish forum and used sp flash tool to install it
problem is, sp flash tool formatted my phone, but encountered an error trying to install the firmware and now my phone wont boot and windows says its not recognised
is there any fix to this? or is my phone bricked?
hey again! i know this post has been a wild ride of me doing stupid stuff and bricking my phone, but i got the firmware back!
only catch is that i'm receiving some nvram error (which i got on my previous phone too. i swear this is the last time im going mediatek), so if anybody has a method that can fix this it'd be highly appreciated
thanks
Hi, Ibxda.
Can you please share with us where you found the stock rom, what went wrong with flashing, and how you managed to get the firmware back?
I have a running system, but I rooted it and cannot apply official upgrades. I'd like to go back, upgrade and root again. I would appreciate the info on your progress.
ifrag_svk said:
Hi, Ibxda.
Can you please share with us where you found the stock rom, what went wrong with flashing, and how you managed to get the firmware back?
I have a running system, but I rooted it and cannot apply official upgrades. I'd like to go back, upgrade and root again. I would appreciate the info on your progress.
Click to expand...
Click to collapse
You should root with Magisk, it's systemless and it should not affect updates. If you want to update you should flash stock recovery. After you updated you are free to flash Twrp again if you want. If you are rooted with SuperSU you should uninstall SuperSU and install Magisk
Hi, I have a allview viva h1001 LTE, I accidentally bricked my device while trying to install twrp(custom one) and now it's bootlooping, I can't boot into recovery or fastboot mode, I tried using SP Flash Tool, but I need the original stock firmware, can someone help me?
Hi. I am also looking for the firmware for this device. There is one firmware that I tried to fill, but it does not have a native scatter and I put it together as best I could. The tablet is boot to recovery but the system does not boot. If you have the opportunity to load the scatter from your original device, then there is a chance that we will defeat this device.
If it's still relevant, then I attach a recovery from a tablet that goes into recovery. I considered the entire dump if someone can see its integrity. Here is full flash read with EFT from other tablet who too restart.
Hi. I wrote down the firmware merged with the EFT, then I downloaded the image from allview p6 pro and using CM2MTK I filled in only the system. The tablet started up but without navigation buttons, with kingorut I made a root, and installed a buildpropeditor. At the end of the build.prop added the line qemu.hw.mainkeys=0 . After the reboot, the buttons appeared. I went into the update and saw the opportunity to install the update over the air but for p6 pro. Can someone tell me where to edit so that the device thinks that it is not p6 about but Viva H1001 LTE ? Thus, download the original update and make the original firmware. Thank you.
I atach build.prop for H1001 and P6_PRO