I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
Features:
-touchwiz ui with near stock functionality
-based on Tab A and Tab S frameworks
-Tab S2 apps
-Tab S3 UI Sounds
-theme support
-pre-rooted (magisk)
-deodexed
-debloated
-knox removed
-Display scaling (root required)
-all apps support multiwindow
-some minor changes like removing safe volume warning, overlay fix etc
Big thanks to @abaithad. He helps me to get working marshmallow on t520.
Notes:
full wipe required!
First boot takes 10 minutes
For some features root required
Device encryption doesn't support here
If you don't want to install root, remove magisk folder from install zip
If you want to make custom rom based on my rom, you're welcome.
Download:
22jun
gdrive: https://drive.google.com/open?id=0B15mAlaKV7nNT0dzZDVVYnZNUEE
mega: https://mega.nz/#!KUMVFBpa!Srp_arn3vlk8NRbsnOcMXXRS2zgZF2UMQIrvWBbu5c4
Kernel sources:
https://github.com/bonuzzz/yamr-kernel
I would like to install this rom but unable to download. says download limit has exceeded. Got another link? Thanks.
tramos said:
I would like to install this rom but unable to download. says download limit has exceeded. Got another link? Thanks.
Click to expand...
Click to collapse
try mirror link on mega.nz
mirror on gdrive https://drive.google.com/open?id=0B15mAlaKV7nNTjBjRkVycWVuems
Can u make a similar marshmallow touchwiz rom for my samsung galxy tab pro 8.4 please
khushil said:
Can u make a similar marshmallow touchwiz rom for my samsung galxy tab pro 8.4 please
Click to expand...
Click to collapse
tab pro 8.4 based on snapdragon. Possibly @Valera1978 will add support for your device after P605
Hi, thanks for your work!
I flashed it on sm-t520 but it unfortunately doesn't work, there's a black screen right after Samsung logo and it stucks. Flash process went fine (system, boot, magisk..)
hello
no install "error 7"
install doe'snt start
perhaps it does'nt know "picassowifi"
regards
Would be very interested to have a look at this ROM, I really like the idea of the touch wiz interface being available, hopefully there will be semi\stable release in the very near future ...
SM-T520
@abaithad helps me a lot with t520. Now we have working rom. Some issues remain, but I think it will be resolved soon
bonuzzz said:
tab pro 8.4 based on snapdragon. Possibly @Valera1978 will add support for your device after P605
Click to expand...
Click to collapse
What do u mean by after P605?
khushil said:
What do u mean by after P605?
Click to expand...
Click to collapse
He makes support for p605 model. As I know. he already has test versions for t320 and t325. He will send you test version if you write him in pm
Ok
Hi
new build has been uploaded
t520 is working very good now. Big thanks to @abaithad. Some issues with camera may happen.
t900 is stable as before.
full changelog you can find here: https://forum.xda-developers.com/showpost.php?p=72766982&postcount=113
download links are in op
I don't have plans to add more features here. If anyone wants to make your own rom, based on this one, feel free to do it. I also uploaded kernel sources to github.
Can't get this to flash, some issue with the updater script. I wiped data, cache, dalvik cache before flashing.
This is the latest 22 June build. I've tried flashing on top of the stock Kitkat Touchwiz firmware and a custom Nougat AOSP ROM, neither of them worked.
I also tried two different TWRP version (3.1.1-0 and 3.0.2-0), that didn't help either.
By the way I used the Google Drive link initially. I would have tried the MEGA download but the link appears to be down.
F1Fanatic27 said:
Can't get this to flash, some issue with the updater script. I wiped data, cache, dalvik cache before flashing.
This is the latest 22 June build. I've tried flashing on top of the stock Kitkat Touchwiz firmware and a custom Nougat AOSP ROM, neither of them worked.
I also tried two different TWRP version (3.1.1-0 and 3.0.2-0), that didn't help either.
Click to expand...
Click to collapse
oops! my fault I tested conditions in installer and forgot to revert my experiments
I've uploaded new version. You have to redownload installer again...
Very well (SM-T520) despite camera not working.
Is there a possibility to retain Polaris Office Viewer in this firmware?
It's commonly used by Samsung in the most of their devices. And cannot be downloaded from market.
Thank you in advance.
bbsc said:
Very well (SM-T520) despite camera not working.
Is there a possibility to retain Polaris Office Viewer in this firmware?
It's commonly used by Samsung in the most of their devices. And cannot be downloaded from market.
Thank you in advance.
Click to expand...
Click to collapse
hancom office may be? i saw polaris office last time long time ago..
try to download here: http://www.apkmirror.com/?post_type=app_release&searchtype=apk&s=polaris
bonuzzz said:
hancom office may be?
Click to expand...
Click to collapse
Excuse me for a stupid question and forget, please.
Now I see that it's not there in the stock SM-T800 firmware.
[off]It's definitely Polaris Viewer, a small application to view doc/xls/pdf.
It's integrated into stock 6.0.1 for my SGS5, for example.[/off]
P.S. And no, the .apk from SGS5 does not work on SM-T520.
bbsc said:
Excuse me for a stupid question and forget, please.
Now I see that it's not there in the stock SM-T800 firmware.
[off]It's definitely Polaris Viewer, a small application to view doc/xls/pdf.
It's integrated into stock 6.0.1 for my SGS5, for example.[/off]
P.S. And no, the .apk from SGS5 does not work on SM-T520.
Click to expand...
Click to collapse
i wrote link to apkmirror above. try apk there.
ps: your question is not stupid
Is there a possibility to retain Polaris Office Viewer in this firmware?
polaris office sm-t520 : https://drive.google.com/file/d/0B8v8ry9VnXSiSVpLQUhXamZUUzQ/view?usp=sharing
(office working correctly only as system app!..I don't know if this works on M rom!)
Related
[September 16][Module][Xposed][LP][KK] TabletMetrics: Report screen > 7" - v5.1.2
Linked is an Xposed Module that will allow your phone to report its screen size as >= 7", in order to allow an app that does not otherwise spot your phone as a tablet (via, for example, the Per App Settings module), to do so.
It's important NOT to play up any sort of app specific functionality in this thread, as the module is "global" in scope and targets the Android framework level, as opposed to a specific app. Whatever benefit this has for you is neither expressed nor implied.
Tested and working on my Nexus 5 with stock KitKat 4.4 AND Lollipop 5.0.x AND Lollipop 5.1.x, YMMV.
As with all Xposed modules --> install the linked APK --> make the module active --> reboot --> profit.
Note: This module has no front-end UI, so there is nothing to do but install and make active.
Thanks to Rovo89, et al, for the amazing framework.
Note: Same version should now work across KK & LP.
Download Module via Mega --> Download Xposed TableMetrics Module v5.1.2. Be sure to update to the latest Xposed library before reporting problems. Also, if you experience signature issues where module won't install, please uninstall your current version of tabletMetrics first, before installing the latest.
EDIT: 05-Jan-2014 --> Updated to support Samsung Android 4.3 Phones. Huge thanks to @Guitarboarder28 for providing debug logs, screen captures, and testing.
EDIT: 05-Feb-2014 --> Updated version for extended compatibility (v1.9)
EDIT: 25-Mar-2014 --> Updated version for extended compatibility (v2.0)
EDIT: 10-Apr-2014 --> Updated version for extended compatibility (v2.1)
EDIT: 27-May-2014 --> Updated version for extended compatibility (v2.2)
EDIT: 28-Feb-2015 --> Updated version for Lollipop compatibility (v3.0)
EDIT: 17-Mar-2015 --> Updated version for KitKat compatibility (v2.2.1)
EDIT: 30-May-2015 --> Updated LP version (v4.0) for compatibility with Xposed Library version xposed-sdk21-arm-20150430.zip
EDIT: 05-June-2015 --> Updated version for extended compatibility (v5.0), consolidated across Android platforms.
EDIT: 16-Sep-2015 --> Updated version for extended compatibility (v5.1.2)
Wow! This is an incredible module! Awesome work. - (Xperia SP CM11)
Android 4.4, it Works perfectly. Very awesome, well done.
????
thanks
Any form to make works this mod in JB??
xiskillo said:
Any form to make works this mod in JB??
Click to expand...
Click to collapse
If you're on an OEM modified ROM (Sense, Touchwiz, Motoblur, etc), where the frameworks have been potentially "adjusted", there's no way to guarantee compatibility.
You can try, and if it works, great. If not, .
Please keep in mind, as stated in the OP and thread title, this is intended (initially) for KitKat (KK) based ROMs.
Having said that, as time permits, I will try and see what (if anything) can be done to support additional flavors.
Can we have a mirror link please? 4shared allows downloads only to registered users..
Kwbmm said:
Can we have a mirror link please? 4shared allows downloads only to registered users..
Click to expand...
Click to collapse
Hmm, I didn't realize that. Any suggestions?
JsChiSurf said:
Hmm, I didn't realize that. Any suggestions?
Click to expand...
Click to collapse
Dropbox if you have an account?
GDrive if you have an account?
Mega.co.nz?
Rapidgator?
Uploaded.net?
Kwbmm said:
Dropbox if you have an account?
GDrive if you have an account?
Mega.co.nz?
Rapidgator?
Uploaded.net?
Click to expand...
Click to collapse
Also AndroidFileHost or dev-host
datajosh said:
Also AndroidFileHost or dev-host
Click to expand...
Click to collapse
Yeah, I think these are better choices
Kwbmm said:
Dropbox if you have an account?
GDrive if you have an account?
Mega.co.nz?
Rapidgator?
Uploaded.net?
Click to expand...
Click to collapse
Nope, have no intention of using dropbox (bandwidth limitations) or gdrive personal accounts.
Justed added a mirror for Mega in the OP.
datajosh said:
Also AndroidFileHost or dev-host
Click to expand...
Click to collapse
These require signing up for and approval, for which I did not want to go through / wait on the process to get this to you guys. Mirror added to OP for Mega which doesn't require login. Normal I host my own mods, but figured uploading would be best for this one.
Sorry about that. I didn't realize 4shared required login!
Mega has great download speeds, btw.
Oh, I'm just checking in to say been running with no problems this module, very cool stuff. Thank you very much.
????
rbrandser said:
Mega has great download speeds, btw.
Oh, I'm just checking in to say been running with no problems this module, very cool stuff. Thank you very much.
????
Click to expand...
Click to collapse
Great. Thanks for the confirmation!
Dev host is a good hosting site.
http://d-h.st/
r00t4rd3d said:
Dev host is a good hosting site.
http://d-h.st/
Click to expand...
Click to collapse
Thanks, I think I'm set with the links I've got in the OP
FYI, all, I'm waiting for a few testers to get back to me to see if perhaps those experiencing glitches on Samsung, running Android 4.3 have been resolved.
ok 4.1.2 galaxy S2 stock Rom
JsChiSurf said:
Thanks, I think I'm set with the links I've got in the OP
FYI, all, I'm waiting for a few testers to get back to me to see if perhaps those experiencing glitches on Samsung, running Android 4.3 have been resolved.
Click to expand...
Click to collapse
Ok with Galaxy S2 Stock ROM 4.1.2 . Only turn landscape to fix resolution . Thanks !!!
I'd like to try it on my SGS2 GT-I9100 with XWLSN NeatROM Lite v4.6.1.
1. If I deactivate/uninstall the module will the changes be reverted?
2. I guess I simply have to use the play store to download/install the app.
you should get this included in the xposed installer app downloads list like all the other modules!
Deleted
Reserved
Reserved 2
The point of there being a thread is to gain suggestions, and improvements from the users.
Not for bug reports.
Its to further development ONLY
This rom seems awesome. Don't know if you already have done this but here's a little suggestion or a feature request. Lockscreen blur:
http://gerrit.aicp-rom.com/#/c/18133/
http://gerrit.aicp-rom.com/#/c/18130/
Do you think it would be possible to implement?
Arju007 said:
This rom seems awesome. Don't know if you already have done this but here's a little suggestion or a feature request. Lockscreen blur:
http://gerrit.aicp-rom.com/#/c/18133/
http://gerrit.aicp-rom.com/#/c/18130/
Do you think it would be possible to implement?
Click to expand...
Click to collapse
That's nice. When I sync up this week I will try to get that working.
Lock screen blur would be nice. Seeing as that's one of the few COS features I haven't implemented yet.
ZX64 said:
That's nice. When I sync up this week I will try to get that working.
Lock screen blur would be nice. Seeing as that's one of the few COS features I haven't implemented yet.
Click to expand...
Click to collapse
Awesome, thank you! I'm out of thanks today, will push the thanks button tomorrow
Arju007 said:
Awesome, thank you! I'm out of thanks today, will push the thanks button tomorrow
Click to expand...
Click to collapse
Well I appreciate the share. I've been looking for that and a fix for maxxaudio so it recognizes the source output correctly in cm13.
ZX64 said:
The Original UnityROM-4.
The point of this ROM is to build a smoother, more optimized version of CM, with as much COS flavor as possible.
Features:
CM13 pure source.
COS features (as many as possible)(Cortana, MaxxAudio, Snapdragon Browser, GalleryNext, Theme Chooser/Store, and TrueCaller)
Fully Odexed.
Full OTA.
UberTC compilation. (Thanks to @varund7726)
Signal hack (thanks to @Sultanxda)
OTA updating (thanks to @Sultanxda)
Revamped kernel (thanks to @Captain_Throwback & @varund7726)
AdAway 3.1.
Kernel Auditor.
OppoCam & plugins.
Minimal Gapps.
Increased WiFi scan interval (saves battery)
SELinux status set to permissive.
Note:
I am not very skilled. I just used a guide or two to get this building. And the help of quite a few others to bring the ROM where it is.
This is a Full OTA ROM. No gapps needed.
DO NOT REPORT BUGS.
This is based off of CM sources, which is not anywhere near "stable" yet.
If you have a fix, or constructive suggestion. Provide all details in a PM.
ROM Link: (4.12-V7) https://www.androidfilehost.com/?fid=24352994023706706
Source Link: https://github.com/LiquidSmokeX64/android
Kernel Source: https://github.com/LiquidSmokeX64/android_kernel_one plus_msm8974
Click to expand...
Click to collapse
Nice to go on . Wellcome back!
Sorry about the derp. I accidentally made calendar remove itself lol.
Will be fixed next release
ZX64 said:
That's nice. When I sync up this week I will try to get that working.
Lock screen blur would be nice. Seeing as that's one of the few COS features I haven't implemented yet.
Click to expand...
Click to collapse
Discovered I can't use that because it requires the Aicp_extras repo and I don't really support use of any non cm repos besides UBERTC toolchains of course
So, some time in the last two days somewhere between v4 - v7 my status bar stopped working with quick pulldown and notifications seem to not be appearing for background apps.
Edit: wiped system and reflashed, issue has been resolved
4.13 is up. Derp fixed, updated the firmwares. The assert check may fail. If so, follow the steps to installing Sultanxda's cm13 ROM. Twrp 2.8.7.0 doesn't write firmwares correctly, and 2.8.6.0 is needed. And is in the ROM.zip just in case.
4.13.1 posted. Few more fixes. LaunchAnyApp Mod integrated.
Gapps reworked. No more integrated Google search app. Mostly because it messes with the lock screen shortcuts.
SetupWizard might crash. But its nothing to worry about. I'll try to get that fixed next update
Edit.
Reuploaded an alternate 4.13.1. Now It's as close to an Unofficial CyanogenOS 13 as I can get it. With the normal UR4 stuff of course. Enjoy.
Also all Google Apps are intact as of now.
can i flash it with twrp 2.8.10 bro? using clean flash ?
rendiipratama said:
can i flash it with twrp 2.8.10 bro? using clean flash ?
Click to expand...
Click to collapse
wouldn't do that. Didn't install completely, system launched but no gapps availabe. Couldn't boot anymore in recovery. Had to install twrp 2.8.6.0 manually via laptop and fastboot. Rebooted into recovery (this time 2.8.6.0), installed the rom without errors, rebooted and google play services is just crashing permanently... Originally came from a fully working (ok two random reboots per day) from unity 4.10..... I really hate marshmallow, seems like no one can feature a working, stable and battery friendly rom. You update your rom, you get ****ed (seems like it will be my fourth clean install in marshmallow)...
solidsnew said:
wouldn't do that. Didn't install completely, system launched but no gapps availabe. Couldn't boot anymore in recovery. Had to install twrp 2.8.6.0 manually via laptop and fastboot. Rebooted into recovery (this time 2.8.6.0), installed the rom without errors, rebooted and google play services is just crashing permanently... Originally came from a fully working (ok two random reboots per day) from unity 4.10..... I really hate marshmallow, seems like no one can feature a working, stable and battery friendly rom. You update your rom, you get ****ed (seems like it will be my fourth clean install in marshmallow)...
Click to expand...
Click to collapse
so, i must bring twrp to 2.8.6.0, flash it via pc? ok, i'll do it. thx @solidsnew
rendiipratama said:
so, i must bring twrp to 2.8.6.0, flash it via pc? ok, i'll do it. thx @solidsnew
Click to expand...
Click to collapse
seems like that. But OP states it will install automatically... Just install twrp 2.8.6.0 via laptop and you should be safe.... And I do a clean install since I only get "setup assistant crashed" over and over and over.... I HATE IT!
solidsnew said:
seems like that. But OP states it will install automatically... Just install twrp 2.8.6.0 via laptop and you should be safe.... And I do a clean install since I only get "setup assistant crashed" over and over and over.... I HATE IT!
Click to expand...
Click to collapse
in xda share oneplus toolkit, and the toolkit when i running instal Costom recovery will instal twrp 2.8.6.0. too, can work with that software, i'm sorry my english so bad my bro
I state setup wizard crashes. It's because of the LaunchAnyApp gestures.
I contacted the creator for a fix. Calm down. It's nothing to worry about
Hi Guys,
Made a Port Firmware [SM-T320] UNOFFICIAL Resurrection Remix for SM-T325.
Link to ROM v5.7.4: https://yadi.sk/d/pK5KobhEvubjq
Link to RRemixMod: https://yadi.sk/d/7D9tnSJe3AKA9j
Link to Gapps: https://yadi.sk/d/WJR5i3Qjr3Mje
Link to original: http://forum.xda-developers.com/galaxy-tab-pro-12-10-8/development/rom-unofficial-resurrection-remix-v5-7-t3411635
Thanks for separating the two devices... And best of luck on your development efforts!
Installed on mine: fantastic rom.Way better in performance and battery than cm13. No bugs so far
sent, me thinks
i appear to have a problem with contacts clear cache dalvik and data and flashed this rom and contacts on startup keeps getting errors ?
update :
its the gapps fault lol i downloaded a mini version and it seems fine now ) pico version seems to have a problem )
thnx for this rom bro
New version (5.7.3) uploaded.
See first post for download link
From mid-June after a kernel upgrade in SM13 stopped working USB-modem. This core of June 16, the modem works.
Kernel with support for the USB-modem (for TWRP):
Hi @promeo123, thanks for this great work of yours, I'm going to install this in my device sm t325, but I have question, do I need to flash also this kernel you posted above ^^^ ?
jga_143 said:
Hi @promeo123, thanks for this great work of yours, I'm going to install this in my device sm t325, but I have question, do I need to flash also this kernel you posted above ^^^ ?
Click to expand...
Click to collapse
If not using usb-modem, it is not necessary.
Hello!
I'm currently using CM12.1 ROM by crpalmer, if I want to install this ROM, will there be any bugs?
Thanks
justmoto92 said:
Hello!
I'm currently using CM12.1 ROM by crpalmer, if I want to install this ROM, will there be any bugs?
Thanks
Click to expand...
Click to collapse
Be sure to do wipe data, system, cache. Then the error will not happen.
Its been 2 weeks already after performing a clean install on my device, great experience with this rom. No lags, no bugs, super fast, with super long battery life! My question is how to take screenshot?
jga_143 said:
Its been 2 weeks already after performing a clean install on my device, great experience with this rom. No lags, no bugs, super fast, with super long battery life! My question is how to take screenshot?
Click to expand...
Click to collapse
Put a quick tile
sent, me thinks
Cissiboy said:
Put a quick tile
sent, me thinks
Click to expand...
Click to collapse
Thanks, I just found out that you can also enable hand gesture to take screenshot
New version (5.7.4) uploaded.
See first post for download link
Has anyone had any problems installing this? My device gets stuck on the welcome screen every time, I've tried the 5.7.4 and the 5.7.3 versions, with and without gapps. I wipe the device, dalvik and cache, flash the rom, and after rebooting the welcome screen where you pick a language shows up. I select a language, press the next button, connect to my wifi, and then it goes back to the welcome screen again and nothing more happens. Am I missing something?
Thank you for this great ROM!
For a long time I had a 5.1.1 ROM on it (Temasek) and thought that it's just the hardware of the tablet which doesn't allow for more battery life and more standby time. I used the tablet mostly as a kitchen radio because, with Viper4Android, the speakers are very loud and clear, ideal for spoken broadcasts.
Now, with this ROM, this has changed. The device is indeed resurrected! Especially the standby time is great now! The additions like Live Display are also welcome.
Roq4rt said:
Am I missing something?
Click to expand...
Click to collapse
Don't know if I understood you correctly. You flashed the gapps directly after flashing the ROM without letting it reboot, didn't you?
Think I had the same issue with this ROM on another device.
For being on the save side, I've wiped after flashing the ROM as well and then it worked.
Modified firmware ResurrectionRemix-M-v5.7.4-20160924-mondrianlte.
See first post for download link: https://forum.xda-developers.com/galaxy-tab-pro-12-10-8/development/rom-unofficial-resurrection-remix-v5-7-t3422525
1. Altered settings menu (cleaned and altered some points).
2. Remove some applications, as well as delete the themes.
3. Changed Trebuchet Launcher on Novalauncher.
4. magnify the screen
5. Embed the core of the latest firmware SlimRom6 (20170118)
thanks a lot for the work!
I'm a bit confused though, which link is for T325 rom? the 1st or the 2nd.... thanks!
Hi, are you going to bring an Android 7 version for the 325?
First, I am not responsible to what happens after you flash this. If your phone dose not work afterwords it is your own doing. I didn't force you to flash it..
This is a stock rom for the most part for the Snapdragon Note 20 Ultra U1 that I use as my daily driver. I disabled file encryption, removed knox, fixed screen cast and shealth plus Bluetooth and smartwatch pairing. Most of the Google apps are uninstallable. I'll try to keep this up to date every month the best I can. Enjoy.
You Must Have A Unlocked Bootloader and a SM-N986 U1 or U Ultra to proceed.This Might Wipe Your Data!! Make a Back up!!.
Instructions:
1: Flash with Odin in the respective slots (bl, ap, cp and csc).
2: Wipe and format data in recovery if coming from a different rom or android version.
3: Reboot and set it up.
Enjoy.
See this thread or this thread if you need a unlock. The teams there are great!
Built With SuperR's Kitchen
Thanks @afaneh92 for the unlock and TWRP
Thanks @bklyn_syed for sharing the fixes for Bluetooth and shealth.
Removed ROM
Previous DUB5 ROM
Rick's ROM SM-N986U1 DUB5 February Patch. This is a safe update to One Ui 3.1.
Ricks_ROM_DUB5_2_Rom
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
======================================
Previous CUA1 ROM
File on MEGA
mega.nz
wow so fast, good work bro.
afaneh92 said:
wow so fast, good work bro.
Click to expand...
Click to collapse
Thanks I built it last night.
Anyone who downloaded this before this post please re-download the rom. I had a file mixed up with another rom by mistake, sorry. New files are uploading now. Please report any problems you may have if any, Thanks.
I uploaded some a new build that addresses the game launcher crash and theme store crash.
@Misterxtc Very glad to see more custom roms being built.
Would you be able to build an AOSP rom for the Note 20 Ultra (SM-986U)?
Would love to see an AOSP rom like Lineage OS or Havoc OS
Datboi459 said:
@Misterxtc Very glad to see more custom roms being built.
Would you be able to build an AOSP rom for the Note 20 Ultra (SM-986U)?
Would love to see an AOSP rom like Lineage OS or Havoc OS
Click to expand...
Click to collapse
Me too but I haven't gotten one to boot properly yet. I also own a S20+ and would like to build something for both. I am exploring the options.
Misterxtc said:
Me too but I haven't gotten one to boot properly yet. I also own a S20+ and would like to build something for both. I am exploring the options.
Click to expand...
Click to collapse
Great. Thank you
Any chance to have a version for the SnapDragon N9860?
OsiMood said:
Any chance to have a version for the SnapDragon N9860?
Click to expand...
Click to collapse
Sorry but no, I don't build for what I don't own.
Misterxtc said:
Sorry but no, I don't build for what I don't own.
Click to expand...
Click to collapse
Are the difference between those Snapdragon versions so substantial ?
OsiMood said:
Are the difference between those Snapdragon versions so substantial ?
Click to expand...
Click to collapse
I don't think so but I'm really not sure, I haven't looked into it. The big deal for me is downloading more firmware, keeping track of more files, storage space and time. Honestly it's pretty simple to build your own. You can get all the info you need for that here .
@Misterxtc, what is your preferred method for root access?
lyall29 said:
@Misterxtc, what is your preferred method for root access?
Click to expand...
Click to collapse
I use magisk canary from here in the download links and flash it in twrp.
Very exciting to see more Dev's like you making things better. Thank you.
iunlock said:
Very exciting to see more Dev's like you making things better. Thank you.
Click to expand...
Click to collapse
Thanks, I figured something like this would make it easier for those who like stock and are unlocked every month.
Misterxtc said:
Thanks, I figured something like this would make it easier for those who like stock and are unlocked every month.
Click to expand...
Click to collapse
I was sitting here debating on whether to go with 10 or 11 lol. Durrr me...I'm all for a custom cleaned up ROM any day over the untouched stock firmware. I see that your ROM is on the latest 11 (CUA1). Nice!
Since your tweaking the universal U1 firmware and since there isn't any carrier bloatware in there, is there much to really remove to make it even more lean and lighter? I know in the old days those firmware's were loaded with bloat and by removing them helped it a lot.
I also noticed that the latest 11 file size was smaller than the latest 10. From what you can see is that from just making 11 more efficient, thus making it lighter?
Regarding the change log:
Disabled File Encryption - Is that for the entire device file encryption or the built in folder encryption that was disabled? What are the benefits from disabling this? Does it just make it smoother even if you don't use the encryption feature on the device?
Removed Knox - Does using a smart watch to use Samsung Pay etc... still a work around even with the device knox removed?
Are there any settings to be able to tweak camera settings to improve the camera? iirc back in the Note 3 and 4 days, a Dev said that there was a value in the image quality or something that was set to I think 8 instead of the max 10? He had maxed that out and included that in the ROM... I'm curious if such adjustments exist in the 11?
Does the CUA1 have the baked in Microsoft Swiftkey (VIRUS) or is that only on carrier firmware's?
I have the Unlocked varaint of the Note 20 Ultra straight from Samsung. Oddly, it came with firmware ATGO, which is ATT lol.. but I'm on TM. What has been annoying is that I can't uninstall the darn microsoft swiftkey.
I love Swiftkey as a keyboard (best touch accuracy IMO), but despise the intrusivemness, so I like to use my own tweaked swiftkey with the internet premissions removed w/ using AFWall+ to block everything else. ie...
The thing is that I haven't been able to install the tweaked swiftkey due to it not letting me since the stock MS one is baked in...
Build 02/06/2023 #OPO
Telegram Group: https://t.me/TugaPowerOPO
#TugaPower R 11.0.0_r46 1.0 LineageOS #laos #OnePlus
If you have some spare bucks consider donating, it will be really appreciated: https://www.paypal.me/TugaPower
If you are on other base rom, best practice is to factory reset prior to flash rom and new gapps.
After this steps if rom does not boot, probably you are encrypted, remove encryption and repeat the steps.
If after removing encryption rom still does not boot, make a factory reset again after flashing rom and gapps, then all will be fine.
Please be sure you are using one TWRP that can handle firmware flash
Advise to use latest official TWRP
Also be sure you are using proper firmware.
Relative to gapps, the advised ones is pico package since nano its now too big to install ( ARM):
OTA built in on rom for updates easly
Three fingers screenshot ( enable in settings over gestures options )
Support out of the box to microG GmsCore ( https://forum.xda-developers.com/t/...oftware-clone-of-google-play-services.3217616 )
No more need to make microG system app
PoGO: Gonna catch then all ( Always report using real GPS in case of mock location been used )
Nethunter/Kali supported
What does not works:
Let me know to add to second post
Download: https://cld.pt/dl/download/16e0f9e9-8f40-4f8d-8142-46bf5088f201/TugaPowerR2_OP1.zip
MD5: f064915c3dbb1fc4cc3d1fae0b62a623
Please dont mirror for now the roms zips, thanks
Sources :
Rom:- https://github.com/LineageOS
Device:- https://github.com/LineageOS/android_device_oneplus_bacon
Kernel:- https://github.com/LineageOS/android_kernel_oppo_msm8974
Place HOLDER for bugs !
Down link not working.
Gold Ribbed said:
Down link not working.
Click to expand...
Click to collapse
Fixed, bad copy paste, thanks for reporting that !
I have one question, does this rom supports DRM content and apps based on it?
Thanks for this Rod. Working good for me.
Not too much different from normal LoS but appreciated, thanks for keeping the OPO alive. Checked it out and everything is working smoothly, no major bugs, crashes or anything so far.
oneplusausage said:
Not too much different from normal LoS but appreciated, thanks for keeping the OPO alive. Checked it out and everything is working smoothly, no major bugs, crashes or anything so far.
Click to expand...
Click to collapse
Thats normal, the base it self its Los, the diference its on having 3 finger screenshot, microg nogapps support, nethunter support and mock locations apps the system report real GPS instead of mock app ( Pokemon will not ban for using mock location app ), support for face unlock its WIP ( no eta )
Hi, I've read somewhere that for new roms (Starting from Android 10) need to resize system partition. I've currently run 7.1.2 Rom, do I need to do the resize for this ROM? Thanks!
saphta said:
Hi, I've read somewhere that for new roms (Starting from Android 10) need to resize system partition. I've currently run 7.1.2 Rom, do I need to do the resize for this ROM? Thanks!
Click to expand...
Click to collapse
If the rom fail to flash its because you need to make that, but on OPO if you did not messed with the partitons before you will be probably just fine flashing and no need to resize. The issue is not really rom problem, the problem its when flashing gapps that will ask for more space, but that is most for bigger gapps packaging, it you use the nano or base package you will have no issues flashing. Sorry for late answer mate !
Hi Daniel, thanks for your reply! Will probably use a pico gapps package. Anyone used MindTheGapps?
saphta said:
Hi Daniel, thanks for your reply! Will probably use a pico gapps package. Anyone used MindTheGapps?
Click to expand...
Click to collapse
One or another should be fine, if use open gapps pick the small package and then install the rest trough Play Store !
Will do! thank you very much!
I'm not able to flash opengapps pico : error 70
I tried to resize system partition but not being able...
@danieldmm can you help me?
@danieldmm
I can confirm what amadeumagalhaes wrote above. Gapps pico won't install.
I've installed Magisk, got root and I tried deleting some system files to make more space but all apps I've used gave me the same message: uninstall failed. I used SD Maid, System app remover, My Android Tools.
Any ideas?
P.S.1 Instead of opengapps pico, I've flashed mindthegapps. No issues flashing it even if it's larger than opengapps pico. The issue with deleting system files remains unchanged.
Hi all,
Found one bug, after installing Signal. On video calls, my video is overexposed. Anyone else has this problem?
saphta said:
Hi all,
Found one bug, after installing Signal. On video calls, my video is overexposed. Anyone else has this problem?
Click to expand...
Click to collapse
A bunch of us had this same problem with @Tomoms ROM. He managed to fix this in recent releases.
I have no issues on whatsapp. On Tomoms ROM thread it says to restart the app until the overexposure is gone.
Well, its being a while guys, updated OP with 2.0 build done today.
TugaPower R 2.0 2023/06/02
https://cld.pt/dl/download/16e0f9e9-8f40-4f8d-8142-46bf5088f201/TugaPowerR2_OP1.zip
MD5: f064915c3dbb1fc4cc3d1fae0b62a623
If you have still 1.0 you cannot use OTA since the system its down, to use OTA you need to update the Updater you have on 1.0, will drop on bottom a update apk of Updater if you are on 1.0 and prefer to use OTA, just install as regular app updating the system one. And then use the built OTA to update from 1.0 to 2.0, you can also check the change log after updating the updater, its too big to post here, it have all the changes commited to lineageos since my last build. Enjoy guys, long live to OPO