I have recently have a issue in my LG V10 H901(T Mobile) that i have custom Rom 5.1 and then i coonect my phone with LG Bridge.
Update show in lg bridge and i update my phone. When update completed installed. Mobile turned off and not turning on now. Blank screen.dead
Any one have idea about the solution of this.
Do a hard reset
follow these instructions
a) pull battery out, and put it back in to make sure phone is completely powered off
b) Press and hold volume down + power button, as soon as phone lights up and shows LG logo release power button for just one second and press again until you see a hard reset screen
c) on hard reset screen press vol - button on yes and press power button to select yes and do it again on next screen,
hope it helps!!
same problem
samy2015 said:
same problem
Click to expand...
Click to collapse
same here
samy2015 said:
same problem
Click to expand...
Click to collapse
i solved it
if someone interested see general threads (unbrick h901....)
Related
A collegue thought it would be interesting to see what the wipe data command on Exchange would do to my phone.
It appears to have bricked it.
The phone boots, shows the THL logo for a few seconds then shows a dark grey screen.
Is this phone recoverable.
I am a complete noob, first post, so if it is recoverable I'm going to need real step by step basic instructions.
Hope there is somebody who can help.
Thanks.
ChrisGrahamUK said:
A collegue thought it would be interesting to see what the wipe data command on Exchange would do to my phone.
It appears to have bricked it.
The phone boots, shows the THL logo for a few seconds then shows a dark grey screen.
Is this phone recoverable.
I am a complete noob, first post, so if it is recoverable I'm going to need real step by step basic instructions.
Hope there is somebody who can help.
Thanks.
Click to expand...
Click to collapse
I got this result too...only grey screen after ThL logo. Can't get into neither recovery mode nor dowlnload mode. Please help
It happened to me too, exactly the same steps and now it is the same thing: logo and after that a black screen. Please, any solution? My wife is gonna kill me (it is her phone):silly:
A hard reset could save your life..
Press and hold the volume (-) button and then press the power button for about 3 seconds, release the volume (-) button when the screen comes and wait for repair menu. It's written in Chinese. Go to the part which is writing MMC at the end with the volume (-) button and press the power button. You are now in the hard reset menu, press the power button again and wait until the phone opens. That's all. You will lose all your programs which you installed before if you didn't back up before but the phone will work. I saved my W200S yesterday with same solution.
Thanks for your advice. I noticed the Chinese menu but I avoided it every time being afraid of not ruining something . Anyway, these days I've found out how to flash new ROMs so I am fooling around with trying different ROMs, I got allowance from my wife for this ). I am trying to fix an issue of the stock ROM, the proximity sensor doesn't light up the display when taking away from ear. The phone was not rooted so any attempt to enter engineering mode failed. Yesterday I discovered a MIUI ROM which looks very stylish and it solved the proximity sensor and even added the notification LED option (this was not included in the stock ROM). Now I have to test the battery life.
motanbigcat said:
A hard reset could save your life..
Press and hold the volume (-) button and then press the power button for about 3 seconds, release the volume (-) button when the screen comes and wait for repair menu. It's written in Chinese. Go to the part which is writing MMC at the end with the volume (-) button and press the power button. You are now in the hard reset menu, press the power button again and wait until the phone opens. That's all. You will lose all your programs which you installed before if you didn't back up before but the phone will work. I saved my W200S yesterday with same solution.
Click to expand...
Click to collapse
I have the same problem with a black screen, the buttons do not work nothing happens Please help
THLW200S - Cyanogenmod 11
Hi, I solved all the issues of my THLW200S (lack of notification LED and improperly functioning of the proximity sensor) by flashing this ROM. I tried a few other ROM's but this one works flawlessly.
kasperski86 said:
I have the same problem with a black screen, the buttons do not work nothing happens Please help
Click to expand...
Click to collapse
Hi, I had the same problem with my W200S, did you solved in any way?
Can you help me?
Thanks
fagh3r said:
Hi, I had the same problem with my W200S, did you solved in any way?
Can you help me?
Thanks
Click to expand...
Click to collapse
Hi i had the same problem a grey screen no recovery mode and i fix it when flashing a new rom.
I use flash tools and i choose (format +download) tab.
I have this same problem, but i can't even get into the safe mode, the chinese one. it just boots up at the thl logo but still only dark grey screen. please help since i tried everything else
I had stock rooted jellybean and updated it with the LG PC suite, downloaded,installed now its always repeating the same default lg boot animation, can someone help me to fix this? Thank you
bloodbind said:
I had stock rooted jellybean and updated it with the LG PC suite, downloaded,installed now its always repeating the same default lg boot animation, can someone help me to fix this? Thank you
Click to expand...
Click to collapse
You need to Hardware Reset after flashing jellybean KDZ. This will remove all data. Can't remember the exact combo but it should be. Battery out. 2 sec. Battery in hold Volume Up + Home + Power. After Lg screen shows up wait 1 more sec. Release Power. Keep the other 2 until you are in recovery (if you have a custom one) or wait the green android guy. Release buttons. If you get android guy he will reset and restart for you. If you flashed maxx modded KDZ do a factory reset. Gl.
christi9503 said:
You need to Hardware Reset after flashing jellybean KDZ. This will remove all data. Can't remember the exact combo but it should be. Battery out. 2 sec. Battery in hold Volume Up + Home + Power. After Lg screen shows up wait 1 more sec. Release Power. Keep the other 2 until you are in recovery (if you have a custom one) or wait the green android guy. Release buttons. If you get android guy he will reset and restart for you. If you flashed maxx modded KDZ do a factory reset. Gl.
Click to expand...
Click to collapse
i tried what you said but it showed me an "attention" Recovery message and told me about a backup from lg service and to hold the power button for 8 seconds to reboot and continue but still kept stuck at the lg logo then i tried another combination which is volup+home+power and showed me the exact same message and i rebooted again and it worked, Thank you its fine now
bloodbind said:
i tried what you said but it showed me an "attention" Recovery message and told me about a backup from lg service and to hold the power button for 8 seconds to reboot and continue but still kept stuck at the lg logo then i tried another combination which is volup+home+power and showed me the exact same message and i rebooted again and it worked, Thank you its fine now
Click to expand...
Click to collapse
My bad hardware reset is with Volume Down.
sorry guys because i am posting this here but in Q&A no one helps
please help me guys ..after flashing a kdz file my phones doesn't switch on at all ..doesn't go to download mode or recovery mode .. I have H960A 32gb
Akhayev said:
sorry guys because i am posting this here but in Q&A no one helps
please help me guys ..after flashing a kdz file my phones doesn't switch on at all ..doesn't go to download mode or recovery mode .. I have H960A 32gb
Click to expand...
Click to collapse
What tot did you flash
Sent from my LG-H900 using Tapatalk
eric5949 said:
What tot did you flash
Sent from my LG-H900 using Tapatalk
Click to expand...
Click to collapse
i flashed KDZ V10C
Well did you try removing the battery for a minute and then powering on again? Do you see anything happening when you press the power button? Did you try following master rest process?
Power off the device and ensure it is not connected to any USB cables.
At the same time, press and hold the following keys for 8 seconds:
Power key
Volume down key
When the LG Logo is displayed, release and then immediately re-hold the Power key.
When the 'FACTORY HARD RESET' screen displays, release the keys.
Press the Power key to reset or one of the Volume keys to cancel.
Press the Power key to confirm the reset. The reset will start immediately.
neptun2 said:
Well did you try removing the battery for a minute and then powering on again? Do you see anything happening when you press the power button? Did you try following master rest process?
Power off the device and ensure it is not connected to any USB cables.
At the same time, press and hold the following keys for 8 seconds:
Power key
Volume down key
When the LG Logo is displayed, release and then immediately re-hold the Power key.
When the 'FACTORY HARD RESET' screen displays, release the keys.
Press the Power key to reset or one of the Volume keys to cancel.
Press the Power key to confirm the reset. The reset will start immediately.
Click to expand...
Click to collapse
i did remove the battery maybe for 2 mins and tried to switch on nothing happens.. then tried the master rest but the screen doesnt turn on ..no lg logo or anything
Disconnect the device, pull out the battery for a minute, reinsert and press and hold the vol up button then connect the usb cable. Hope it works.
Sleep-_-23 said:
Disconnect the device, pull out the battery for a minute, reinsert and press and hold the vol up button then connect the usb cable. Hope it works.
Click to expand...
Click to collapse
i tried that too but it didnt work ..the screen doesnt switch on
Akhayev said:
i tried that too but it didnt work ..the screen doesnt switch on
Click to expand...
Click to collapse
Which kdz did you flash? H960a?
Sleep-_-23 said:
Which kdz did you flash? H960a?
Click to expand...
Click to collapse
H960A Switzerland V10c
it become dead as lg g4
Sent from my Infinix X509 using Tapatalk
Akhayev said:
H960A Switzerland V10c
Click to expand...
Click to collapse
I flashed it too in my h960p without any problems, even when my phone is 64gb and the kdz it's for the 32gb variant. So, that's weird. Bad download maybe? Try to charge your phone for a while.
nothing working
Akhayev said:
sorry guys because i am posting this here but in Q&A no one helps
please help me guys ..after flashing a kdz file my phones doesn't switch on at all ..doesn't go to download mode or recovery mode .. I have H960A 32gb
Click to expand...
Click to collapse
Please read forum rules before posting! You may post your question ONLY once and in the correct section of Q&A, not where you think you will get a quicker answer! Also you must wait 24 hours for an answer before bumping your thread. This is a development site and NOT a help desk staffed with paid employees.
Please wait in your original thread posted minutes before this one http://forum.xda-developers.com/lg-v10/help/please-help-phone-doesnt-switch-t3338092
Moved to Q&A and closed
I have unlockbootloader my v300k after i flash it to us998 to root it get bootloop and i cant get to fastboot or download. What can i do ? pls help mee
giabao574 said:
I have unlockbootloader my v300k after i flash it to us998 to root it get bootloop and i cant get to fastboot or download. What can i do ? pls help mee
Click to expand...
Click to collapse
Go to the Korea thread and see what they say?
giabao574 said:
I have unlockbootloader my v300k after i flash it to us998 to root it get bootloop and i cant get to fastboot or download. What can i do ? pls help mee
Click to expand...
Click to collapse
you don't know how to get into bootloader or you can't get into bootloader?
I cant get into bootloader . Because when i plug cabble into my phone it started to charge . I try with fastboot and download mode but it cant . I think my phone lost bootloader
giabao574 said:
I cant get into bootloader . Because when i plug cabble into my phone it started to charge . I try with fastboot and download mode but it cant . I think my phone lost bootloader
Click to expand...
Click to collapse
it - from time to time - shows the charging logo,
then just force it to reset: power button + volume down - keep both pressed until it resets (screen off),
then keep the volume down button pressed
<-- with the usb cable plugged in all of the time
That should get you into bootloader.
Note:
the phones behaves really weird and it could be that it shuts off while in bootloader.
In that case simply disconnect the USB cable, connect it to the phone only and then - while the volume button down is pressed - connect it to PC
zacharias.maladroit said:
it - from time to time - shows the charging logo,
then just force it to reset: power button + volume down - keep both pressed until it resets (screen off),
then keep the volume down button pressed
<-- with the usb cable plugged in all of the time
That should get you into bootloader.
Note:
the phones behaves really weird and it could be that it shuts off while in bootloader.
In that case simply disconnect the USB cable, connect it to the phone only and then - while the volume button down is pressed - connect it to PC
Click to expand...
Click to collapse
I tried so hard but it can't it always go to show charge logo and my pc cant recognize my phone .
Lg v30 Boot loop stuck no pc detection
My LG v30 suddenly stuck in Boot loop there is no sign of dection in the PC. All combination of buttones tried but all in vain.
Any trick please
LG V30 bootloop
amarsaeed said:
My LG v30 suddenly stuck in Boot loop there is no sign of dection in the PC. All combination of buttones tried but all in vain.
Any trick please
Click to expand...
Click to collapse
Hi, I seem to have the same problem... the phone loops the startup screen and the USB connection is not working. I can get the initial download mode screen to appear for a minute, the looping starts again.
I think I have a brick...
hammeru said:
Hi, I seem to have the same problem... the phone loops the startup screen and the USB connection is not working. I can get the initial download mode screen to appear for a minute, the looping starts again.
I think I have a brick...
Click to expand...
Click to collapse
have you tried Master Reset?
ChazzMatt said:
have you tried Master Reset?
Click to expand...
Click to collapse
MAJOR EDIT: Master Reset worked, is accessed by holding vol down and power until screen goes dark, release power when the lg logo appears, count to 2, press power again until factory reset screen, say yes, should put you into twrp (provided you already have it installed of course)
Is there a button combination to do this? I'm fearing I also bricked my us998 by dirty flashing from aospx to the johnfawkes stock rom after I randomly stopped getting lte connection. Probably definitely should have factory reset but there were a few pictures I didn't want to lose and now I am really wishing I had bitten the bullet on them to save my phone. Current situation is a loop at the verizon startup screen, vol down and power can initiate a restart and from there I can hold vol up to get the initial download mode splash screen but then the screen goes dark and the device starts to loop again. Any suggestions would be greatly appreciated.
rollthedaisuke said:
MAJOR EDIT: Master Reset worked, is accessed by holding vol down and power until screen goes dark, release power when the lg logo appears, count to 2, press power again until factory reset screen, say yes, should put you into twrp (provided you already have it installed of course).
Click to expand...
Click to collapse
Glad you got it figured out.
Guys, desperately need your suggestions.
I've unlocked bootloader and tried to flash lineageos 16 [pie v9].
And run into bootloop problem. Phone showed up sh#tty g#ogle link, like:
https://g.co/ABH
Can't get into recovery mode..cant do anything.
Anyone run into such sort of problems?
spacedrone808 said:
Guys, desperately need your suggestions.
I've unlocked bootloader and tried to flash lineageos 16 [pie v9].
And run into bootloop problem. Phone showed up sh#tty g#ogle link, like:
https://g.co/ABH
Can't get into recovery mode..cant do anything.
Anyone run into such sort of problems?
Click to expand...
Click to collapse
If you can get the screen to at least display something. Plug your phone into your computer, hold the power and volume down button, when the screen turns black, release all buttons and quickly hold volume up, release when you see download mode appear. This should let you restore to a stock KDZ.
19 said:
If you can get the screen to at least display something. Plug your phone into your computer, hold the power and volume down button, when the screen turns black, release all buttons and quickly hold volume up, release when you see download mode appear. This should let you restore to a stock KDZ.
Click to expand...
Click to collapse
Thanks a lot, that i was needed exactly for my starting point!