hi guys,
recently i had a problem with nvram partition on my henessy and i had lost my imei also,so what can i do is only flashing custom rom from twrp,root it,and restore my imei (otherwise i will always lose my signal on sim 1 so i only be able to use sim 2) but couple of these days i feel unsatisfaction of any other custom rom so i desperately need backup of stock rom in twrp.i really felt grateful if someone would help me with this problem. because if i flash directly from fastboot or spflash i will revert back with locked bootloader and stock recoveries,which means i cant flash Super User inorder to get my device rooted and get back my imei.
Thanks mod and xda
galuh said:
hi guys,
recently i had a problem with nvram partition on my henessy and i had lost my imei also,so what can i do is only flashing custom rom from twrp,root it,and restore my imei (otherwise i will always lose my signal on sim 1 so i only be able to use sim 2) but couple of these days i feel unsatisfaction of any other custom rom so i desperately need backup of stock rom in twrp.i really felt grateful if someone would help me with this problem. because if i flash directly from fastboot or spflash i will revert back with locked bootloader and stock recoveries,which means i cant flash Super User inorder to get my device rooted and get back my imei.
Thanks mod and xda
Click to expand...
Click to collapse
http://en.miui.com/forum.php?mod=viewthread&tid=299779&highlight=IMEI+restore
not working
Capt. John Yossarian said:
http://en.miui.com/forum.php?mod=viewthread&tid=299779&highlight=IMEI+restore
Click to expand...
Click to collapse
my device is redmi note 3 mediatek so it is not possible to repair it using qspt which is for quallcom only,but thanks anyway
Related
I need help!!
Trying to flash the stock roms I received from here-->> http://forum.xda-developers.com/showthread.php?t=2370987
I always get a mismatch error suggesting that the software I'm loading isn't correct. Looking at my phone, the model is a bit different.
It's (L090a) while the models listed are (L100a & L100i).
My phone's recovery has been blocked by my carrier Digicel so I'm unable to enter recovery, let alone do any backups via CWM.
Does anyone have access to this stock rom? or at least the correct preloader will do.
Unlocked bootloader?
d_originaldappa said:
I need help!!
Trying to flash the stock roms I received from here-->> http://forum.xda-developers.com/showthread.php?t=2370987
I always get a mismatch error suggesting that the software I'm loading isn't correct. Looking at my phone, the model is a bit different.
It's (L090a) while the models listed are (L100a & L100i).
My phone's recovery has been blocked by my carrier Digicel so I'm unable to enter recovery, let alone do any backups via CWM.
Does anyone have access to this stock rom? or at least the correct preloader will do.
Click to expand...
Click to collapse
I'm just curious as to whether you found anything to unlock the bootloader on the L090a. Thats the model I have and my bootloader is locked up tighter than an virgin in a convent.
biitci said:
I'm just curious as to whether you found anything to unlock the bootloader on the L090a. Thats the model I have and my bootloader is locked up tighter than an virgin in a convent.
Click to expand...
Click to collapse
Well, in short, not yet. But there's hope.
Curently, I have no access to CWM. I was a bit hasty and flashed a ROM for a Blu Life VIEW! My phone couldn't boot, was bricked. I tried flashing the cwm files from lopestorm and I had access to cwm for the first time, but even after flashing the stock L100 files, it couldn't boot. Used a friend's blu life play to extract the stock rom using MTK Droid Tools. Tried hard to revive it.
Currently it's working but back to square one. When I flash a new recovery file (which worked before) the phone doesn't boot and needs to be reflashed and reformatted. Hoping to get some help from a professional. Just have to figure out a way to get the cwm to work.
Realised too that the bootloader being locked isn't a problem once you're using SP Flash Tools.
biitci said:
I'm just curious as to whether you found anything to unlock the bootloader on the L090a. Thats the model I have and my bootloader is locked up tighter than an virgin in a convent.
Click to expand...
Click to collapse
After searching for a while, I found a way to get CWM on the device. Let me know if you want to know the method I used.
Experimenting with some custom roms at the moment
d_originaldappa said:
After searching for a while, I found a way to get CWM on the device. Let me know if you want to know the method I used.
Experimenting with some custom roms at the moment
Click to expand...
Click to collapse
Yes we are very much interested. Quite a few of us have that same problem and have been looking around but haven't been successful. Please share your method with us.
Thanks we really appreciate it.
kriptkeeper said:
Yes we are very much interested. Quite a few of us have that same problem and have been looking around but haven't been successful. Please share your method with us.
Thanks we really appreciate it.
Click to expand...
Click to collapse
Will do. Just give me a couple days to get myself organized.
d_originaldappa said:
Will do. Just give me a couple days to get myself organized.
Click to expand...
Click to collapse
:good: We are eagerly awaiting
d_originaldappa said:
After searching for a while, I found a way to get CWM on the device. Let me know if you want to know the method I used.
Experimenting with some custom roms at the moment
Click to expand...
Click to collapse
Very very very interested. I don't care what I have to put on this phone to get it away from the clutches of the carrier ... well I do care but then again I don't. Let me know as soon as possible. Thank you in advance for your awesomeness :good:
cwm
ok so i got a blu life play also and digicel is also my carrier. i did this to get cwm. i forgot where i got the recovery so i uploaded my
YOUR DEVICE MUST BE ROOTED BEFORE TRYING.
1.download recovery.img https://mega.co.nz/#!Ho4FTLwS!Z-S1VW34cjwf51dfy-Y_jrCFe2Fy7f4Ar4Wucf3ttGM[/url]
2. use moblieuncle tools to flash ( many vids on youtube etc)
3. reboot into recovery by holding lock and volume up key
tell me if u guys get any roms to work. i tried the 4.4.2 kitkat but got stuck at bootscreen luckily i could still enter cwm to restore...
ALSO BEFORE TRYING ANY ROM BACKUP YOUR CURRENT ROM.
ghostslayer96 said:
ok so i got a blu life play also and digicel is also my carrier. i did this to get cwm. i forgot where i got the recovery so i uploaded my
YOUR DEVICE MUST BE ROOTED BEFORE TRYING.
1.download recovery.img https://mega.co.nz/#!Ho4FTLwS!Z-S1VW34cjwf51dfy-Y_jrCFe2Fy7f4Ar4Wucf3ttGM[/url]
2. use moblieuncle tools to flash ( many vids on youtube etc)
3. reboot into recovery by holding lock and volume up key
tell me if u guys get any roms to work. i tried the 4.4.2 kitkat but got stuck at bootscreen luckily i could still enter cwm to restore...
ALSO BEFORE TRYING ANY ROM BACKUP YOUR CURRENT ROM.
Click to expand...
Click to collapse
is there a list of roms that actually work with our device
Any news about the ROMs for this device? L090B. I am stuck with 4.2.1, and yes no luck booting other roms.
d_originaldappa said:
Well, in short, not yet. But there's hope.
Curently, I have no access to CWM. I was a bit hasty and flashed a ROM for a Blu Life VIEW! My phone couldn't boot, was bricked. I tried flashing the cwm files from lopestorm and I had access to cwm for the first time, but even after flashing the stock L100 files, it couldn't boot. Used a friend's blu life play to extract the stock rom using MTK Droid Tools. Tried hard to revive it.
Currently it's working but back to square one. When I flash a new recovery file (which worked before) the phone doesn't boot and needs to be reflashed and reformatted. Hoping to get some help from a professional. Just have to figure out a way to get the cwm to work.
Realised too that the bootloader being locked isn't a problem once you're using SP Flash Tools.
Click to expand...
Click to collapse
If you still have this file could you upload it. I really need a file to get mine working again. WOuld be very much appreciated.
Been searching for weeks now...asked here on another forum but not really getting any answers.
Can someone who knows how to flash TWRP or CWM please, please, please come forth with an instruction or a link to instruction on how to do so?
Reason i want to flash a custom recovery is because my phone failed an update and is now stuck on recovery. I want to backup my data before flashing ROM.
Mind you, i didn't have bootloader unlocked prior to the failed update. I just had it rooted using king root. I am not sure if it is mandatory for bootloader to be unlocked before flashing any custom recovery. Is it???
If yes, then since OS isnt loading, i won't be able to "install" anything to unlock bootloader. Therefore, is there a way to "flash"-unlock bootloader in order to flash the custom recovery? Is there a way around flashing a custom recovery on a phone that doesn't have bootloader unlocked and is now stuck on the stock recovery?
Basically i just want to backup by data. It doesnt have to be through the flashing-custom-recovery-in-order-to-backup-data method. Any method that will do the job is perfectly fine with me . I am inquiring about this method because all my searches led me to only this solution? Any other solutions are welcomed.
Thanks in advance!
freefallin said:
Been searching for weeks now...asked here on another forum but not really getting any answers.
Can someone who knows how to flash TWRP or CWM please, please, please come forth with an instruction or a link to instruction on how to do so?
Reason i want to flash a custom recovery is because my phone failed an update and is now stuck on recovery. I want to backup my data before flashing ROM.
Mind you, i didn't have bootloader unlocked prior to the failed update. I just had it rooted using king root. I am not sure if it is mandatory for bootloader to be unlocked before flashing any custom recovery. Is it???
If yes, then since OS isnt loading, i won't be able to "install" anything to unlock bootloader. Therefore, is there a way to "flash"-unlock bootloader in order to flash the custom recovery? Is there a way around flashing a custom recovery on a phone that doesn't have bootloader unlocked and is now stuck on the stock recovery?
Basically i just want to backup by data. It doesnt have to be through the flashing-custom-recovery-in-order-to-backup-data method. Any method that will do the job is perfectly fine with me . I am inquiring about this method because all my searches led me to only this solution? Any other solutions are welcomed.
Thanks in advance!
Click to expand...
Click to collapse
First things first: What model is your phone? Is it the X2-CU (International), X2-EU (Russia, Europe and the Middle East), and the Vibe X2-AP (Indonesia, India, etc.) or the X2-TO (China Only). I can help you if it is the X2-CU or the X2-EU versions. Also, you DO NOT have to unlock the bootloader of this phone to install custom recovery. I know, it's weird, but it's true. If you tell me which model it is, I can give you the files needed to flash custom recovery. Good luck
Yoshi_Guy said:
First things first: What model is your phone? Is it the X2-CU (International), X2-EU (Russia, Europe and the Middle East), and the Vibe X2-AP (Indonesia, India, etc.) or the X2-TO (China Only). I can help you if it is the X2-CU or the X2-EU versions. Also, you DO NOT have to unlock the bootloader of this phone to install custom recovery. I know, it's weird, but it's true. If you tell me which model it is, I can give you the files needed to flash custom recovery. Good luck
Click to expand...
Click to collapse
OH BEAUTIFUL! Just when i was about to sink into depression. You are a life saver buddy!
It's X2-EU
Mine is X2-AP, can you give me the link to CWM Recovery?
Help ! I got a Kate with a Kenzo rom on it.
Can i flash a Kate rom via Miflash without loosing IMEI, WiFi and bluetooth.
Are there other methods of flashing Kate rom that keeps everything intact?
I have no root and my Bootloader is locked.
Any help aprecieated
rightnow i flashed a Kenzo rom with Kate modem and everything works.
If you wanna kate MIUI rom or your kate RN3 SE..then you must flashing kate RN3 SE fastboot rom with miflash..then you don't needed flashing kate modem again..
I have done that but now i have no wifi no bluetooth.
Gamester87 said:
I have done that but now i have no wifi no bluetooth.
Click to expand...
Click to collapse
What version of fastboot rom you're flashing it..?, and from where you're downloading it..?, is it right from here :
Latest Global Stable fastboot rom for Kate : V8.0.4.0.MHRMIDG
Latest Developer fastboot rom for Kate : v6.11.24
Also you had already choice set to "Clean all" while flashing with miflash..?
i have flashed these fastboot roms in EDL mode with choice set to "Clean all".
should i try it in fastboot mode?
Redmi Note 3 Special Edition Latest Global Developer Version
hxxp://update.miui.com/updates/v1/fullromdownload.php?d=kate_global&b=X&r=global&n=
Redmi Note 3 Special Edition Latest Global Stable Version
hxxp://update.miui.com/updates/v1/fullromdownload.php?d=kate_global&b=F&r=global&n=
in this rom the config.bin is missing i took it from the developer rom.
these roms are from hxxp://en.miui.com/a-234.html
sorry i cant post ouside links repplace xx in the adress with tt
I will try it with your roms and report back.
same with your roms no wifi no bluetooth. I will send this unit back.
Gamester87 said:
same with your roms no wifi no bluetooth. I will send this unit back.
Click to expand...
Click to collapse
Really weird things..
I though your phone already loosing IMEI and mac address on it..i think that's cause by flashing wrong fastboot rom before..you can check it under about phone..after flashing try check it if your phone still has it or not..
Not sure about this if any different in this case..if you still wanna try it to flashing via fastboot mode..you must unlocking your bootloader first..after flashing latest developer fastboot rom..adding your mi account..then go to fastboot mode..then unlock it with miunlock tool..after that if success unlocked..you can try flashing through fastboot mode.
If still doesn't success...just like you said..just send it back your phone to the seller or services center to get fix it or replace the unit with new one.
i dont lost imei i was just asking if ther is a method without loosing IMEI and WiFi.
The phone came with a shop rom i think. It was on MIUI ver. 8.0.1.0 but i couldn't update via updater. I always got the error " Couldn't boot to recovery mode " pretty strange. Thanks for help.
JJeamy said:
Really weird things..
I though your phone already loosing IMEI and mac address on it..i think that's cause by flashing wrong fastboot rom before..you can check it under about phone..after flashing try check it if your phone still has it or not..
Not sure about this if any different in this case..if you still wanna try it to flashing via fastboot mode..you must unlocking your bootloader first..after flashing latest developer fastboot rom..adding your mi account..then go to fastboot mode..then unlock it with miunlock tool..after that if success unlocked..you can try flashing through fastboot mode.
If still doesn't success...just like you said..just send it back your phone to the seller or services center to get fix it or replace the unit with new one.
Click to expand...
Click to collapse
Will not the warranty be void after so many experiments on the device?
Nope..just telling them about wifi and bluetooth problem, and bootloader still in locked state..
Gamester87 said:
i dont lost imei i was just asking if ther is a method without loosing IMEI and WiFi.
The phone came with a shop rom i think. It was on MIUI ver. 8.0.1.0 but i couldn't update via updater. I always got the error " Couldn't boot to recovery mode " pretty strange. Thanks for help.
Click to expand...
Click to collapse
friend. dont send it back. I can solve it for you.
andersonaragao said:
friend. dont send it back. I can solve it for you.
Click to expand...
Click to collapse
Thanks for the help. Now i have send it back it was bought on Ebay so no return cost.
Nevertheless Could you tell me how you would fix it. Just curious and maybe someone who is reading this thread later can solve the problem.
andersonaragao has fixed my phone. Big thanks. I can recommend this guy he know what he is doing.
Ive recived a device with the model on the sticker : 2015161 which is by google the kate edition.
on fastboot getvar product I got kenzo.
so I flashed kenzo firmware and now I have no reception, on *#*#4636#*#* the radio cant be turned on.
what Ive tried:
flashing few kate stom firmwares : all stuck on bootloop
rewriteing the qcn : no network
unlocking the bootloader and flasing kate modem : no network
what else can I do ?
edit:
Can any one upload for me the following partitions from a phone with working cellular connection:
modem
modemst1
modemst2
fsg
and possibly QCN ?
thanks in advance !
I know it's an old post but I did the same thing. Did you find a solution?
Alaskan Dan said:
I know it's an old post but I did the same thing. Did you find a solution?
Click to expand...
Click to collapse
If you can't flash the kate firmware, do you will have to reinstall the latest stable version of MIUI using MiFlash. Take a look at Google how do you do it
snacs said:
If you can't flash the kate firmware, do you will have to reinstall the latest stable version of MIUI using MiFlash. Take a look at Google how do you do it
Click to expand...
Click to collapse
i cant install custom kate roms. i did flashed **** and now i bricked it GRRRR
fastboost still alive but this means miflash again and relock bootloader FFS i just want a stable custom rom that is not miui....
the phone was good till it got a memory crash and kept rebooting when ever i installed apps
finaly after 4months i had the time to fix it. and now i keep messing it up.
anyway. i will post a new post maybe some one will help.
but what i want to know what do i need to do when i want to install a custom rom on my kate. do i need to flash any modem? or not
reggiexp said:
i cant install custom kate roms. i did flashed **** and now i bricked it GRRRR
fastboost still alive but this means miflash again and relock bootloader FFS i just want a stable custom rom that is not miui....
the phone was good till it got a memory crash and kept rebooting when ever i installed apps
finaly after 4months i had the time to fix it. and now i keep messing it up.
anyway. i will post a new post maybe some one will help.
but what i want to know what do i need to do when i want to install a custom rom on my kate. do i need to flash any modem? or not
Click to expand...
Click to collapse
Miflash will not relock your bootloader. There is just an option to do it, but you can install latest dev weekly through miflash and get back on custom rom immediately. Maybe i dont know some specifics but i did it multiple times.
Borodavnochi said:
Miflash will not relock your bootloader. There is just an option to do it, but you can install latest dev weekly through miflash and get back on custom rom immediately. Maybe i dont know some specifics but i did it multiple times.
Click to expand...
Click to collapse
edl does. fastboot flash doesn't work. and bootlaoder is relocked
Hello everyone, I and my father have the exact same phone (kenzo). The problem is that even though on mine everything works like a charm and I have changed a lot of roms, my father's phone every time I try anything goes soft bricked or have problems with signal and settings. Currently I have flashed via edl the Chinese Dev rom(5.1.1) with which everything works, besides the restrictions of the rom version(language, gapps). I must say that when I first install the Chinese Dev the Sim is not recognised or I have no signal. After the first update everything is ok and calling function works like a charm. After That I try to install twrp (zxc by ~xm) and restore a backup from the previous working installation, but the only I get is settings app fc and problems with calls. Neither of the two sides hear the other while in call. This occurred when I flashed a mm bootloader zip in order to boot to nitrogen is. (https://drive.google.com/file/d/0B3tM1cVKiyp6Q3RvNUtLdEp1Q3M/view ) The rom booted but I had no sound in calling, and the other side couldn't hear either. Any ideas?
Thanks for your time!
Aristalex said:
Hello everyone, I and my father have the exact same phone (kenzo). The problem is that even though on mine everything works like a charm and I have changed a lot of roms, my father's phone every time I try anything goes soft bricked or have problems with signal and settings. Currently I have flashed via edl the Chinese Dev rom(5.1.1) with which everything works, besides the restrictions of the rom version(language, gapps). I must say that when I first install the Chinese Dev the Sim is not recognised or I have no signal. After the first update everything is ok and calling function works like a charm. After That I try to install twrp (zxc by ~xm) and restore a backup from the previous working installation, but the only I get is settings app fc and problems with calls. Neither of the two sides hear the other while in call. This occurred when I flashed a mm bootloader zip in order to boot to nitrogen is. (https://drive.google.com/file/d/0B3tM1cVKiyp6Q3RvNUtLdEp1Q3M/view ) The rom booted but I had no sound in calling, and the other side couldn't hear either. Any ideas?
Thanks for your time!
Click to expand...
Click to collapse
Is ur device bootloader is unlocked ?
If yes then by which method u had unlocked by unofficial way or by official way?
Criston said:
Is ur device bootloader is unlocked ?
If yes then by which method u had unlocked by unofficial way or by official way?
Click to expand...
Click to collapse
I used to unlock it the official way. I found a post in the nitrogenOS thread that said that if the rom doesn't boot I should flash the zip that I have mentioned in my post. They said it was the mm bootloader. The zip contains a file named emmc_appsboot.mbn which is also on the unofficial unlock zip. So I suppose I unlocked it unofficially. I must say that every time after flashing fastboot rom the mi unlock said that bootloader was already unlocked.
Aristalex said:
I used to unlock it the official way. I found a post in the nitrogenOS thread that said that if the rom doesn't boot I should flash the zip that I have mentioned in my post. They said it was the mm bootloader. The zip contains a file named emmc_appsboot.mbn which is also on the unofficial unlock zip. So I suppose I unlocked it unofficially. I must say that every time after flashing fastboot rom the mi unlock said that bootloader was already unlocked.
Click to expand...
Click to collapse
U should unlock using the official way if u dont want to face any problem
And also if wanna Flash any custom rom first clean Flash miui using Mi flash tool and google how to Flash custom rom on kenzo
make sure u have backup of all ur files
Criston said:
U should unlock using the official way if u dont want to face any problem
And also if wanna Flash any custom rom first clean Flash miui using Mi flash tool and google how to Flash custom rom on kenzo
make sure u have backup of all ur files
Click to expand...
Click to collapse
Yes yes I know that with my kenzo everything works if I follow your advice. But with my father's one simply doesn't. I flashed the official miui with mi flash tool. The bootloader remained unlocked without reason. Also I tried clean flash and lock option on the tool without success. Then I wiped data and dalvik and cache and dirty flashed a miui custom rom over it. For the time being everything works perfectly except of the fingerprint sensor. Aida 64 recognize the fp, every other app not. Also I flashed radon kernel because I had settings app FC. That's all. I hope the info help you understand the situation that I am in, and find a way to make it respond as mine...
Mine and the other are exactly the same, they even had the same number on the sticker in the back and same fingerprint sensor. Mine takes every rom, unlock update without problems. My father's not. It is crazy...