Does anyone know an app for putting the Shield to sleep after a set time?
I know I can use the TV's sleep timer - but I use the Shield remote exclusively and the only thing I go to the TV's remote is the stupid timer.
b0gd4n said:
Does anyone know an app for putting the Shield to sleep after a set time?
I know I can use the TV's sleep timer - but I use the Shield remote exclusively and the only thing I go to the TV's remote is the stupid timer.
Click to expand...
Click to collapse
The shield TV will turn itself off after about an hour with no use. If you have CEC setup it should turn your TV off at the same time.
Sent from my Nexus 6P using Tapatalk
Acid0057 said:
The shield TV will turn itself off after about an hour with no use. If you have CEC setup it should turn your TV off at the same time.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
OK - good point. Does it do that if playing Plex/Netflix videos? (with autoplay enabled)
b0gd4n said:
OK - good point. Does it do that if playing Plex/Netflix videos? (with autoplay enabled)
Click to expand...
Click to collapse
No in my experience it won't start the one hour counter till Netflix says "Are you still watching this title?" Then don't press anything and it will turn off in an hour.
I don't use Plex enough to know if it does the same.
Also if you have CEC on and go into the shield power menu and select sleep now, it will turn the shield off and then turn off your TV.
All of this of course assumes that your TV and HDMI cable support CEC for input changing and on/off of power.
Sent from my Nexus 6P using Tapatalk
Acid0057 said:
No in my experience it won't start the one hour counter till Netflix says "Are you still watching this title?" Then don't press anything and it will turn off in an hour.
I don't use Plex enough to know if it does the same.
Also if you have CEC on and go into the shield power menu and select sleep now, it will turn the shield off and then turn off your TV.
All of this of course assumes that your TV and HDMI cable support CEC for input changing and on/off of power.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
yeah - I've got CEC on and that is what I am doing now (sleeping the shield from the power menu). I don't want to use the TV's remote at all and the only reason I keep it on my nightstand is to use the timer function.
I will test and see if it turns off with Plex autoplaying after 1hr, but ideally, it would be nice to have proper timer functionality built it.
Thanks
b0gd4n said:
yeah - I've got CEC on and that is what I am doing now (sleeping the shield from the power menu). I don't want to use the TV's remote at all and the only reason I keep it on my nightstand is to use the timer function.
I will test and see if it turns off with Plex autoplaying after 1hr, but ideally, it would be nice to have proper timer functionality built it.
Thanks
Click to expand...
Click to collapse
You're welcome. Report back as I'd be interested to find out your results.
Sent from my Nexus 6P using Tapatalk
I can already tell, that built in Android TV sleep option is not reliable - it does not work in most apps while playing (especially not with the set time), generally it works well only while you're at the home screen.
For example, with Netflix playing something my SHIELD goes to sleep only after Netflix stops (either due to "are you still watching" dialog or show's end) and in Hulu app it does not work at all (I set it to 1 hour and when I wake up in the morning, Hulu is always still playing something unless it crashed or there was some network issue).
I was looking for an app that would force sleep after set time no matter what, but unfortunately I so far didn't find anything that would work with Android TV.
revanmj said:
I can already tell, that built in Android TV sleep option is not reliable - it does not work in most apps while playing (especially not with the set time), generally it works well only while you're at the home screen.
For example, with Netflix playing something my SHIELD goes to sleep only after Netflix stops (either due to "are you still watching" dialog or show's end) and in Hulu app it does not work at all (I set it to 1 hour and when I wake up in the morning, Hulu is always still playing something unless it crashed or there was some network issue).
I was looking for an app that would force sleep after set time no matter what, but unfortunately I so far didn't find anything that would work with Android TV.
Click to expand...
Click to collapse
Keep us posted if you do find anything please.
Sent from my Nexus 6P using Tapatalk
This would be a very useful app for all android TV users
Still looking for a solution for this.
Same here. Years later. Tried researching a IFTTT option but could not find one.
I realise this is an old thread but had anyone tried using tasker for this? Tasker somewhat works in android tv so perhaps that would work. I'm using taker to do kaeeo routines on my google box
Related
You can now mirror your screen when using a Chromecast with the Note 3 running 4.4.2. Go into Settings >More Settings >Screen Mirroring to enable screen casting through your Chromecast. You can also cast directly from the Chromecast app if screen mirroring doesn't work.
http://www.androidpolice.com/2014/07/09/screen-casting-with-sound-from-android-is-now-live-for-select-devices-running-kitkat-4-4-1-or-higher/
I must be doing something wrong because I can't get it to cast...
Sent from my Note 3
Figured it out. Even though the app said it was updated today it was not the latest version. I side loaded the latest version and it works. It is too choppy though.
Sent from my Note 3
I have sideloaded 1.74 and when i press cast screen it tries to connect but nothing happened I have a note 3 with galaxy fre rom
Sent from my SM-N900P using XDA Free mobile app
MeridianSun said:
Figured it out. Even though the app said it was updated today it was not the latest version. I side loaded the latest version and it works. It is too choppy though.
Sent from my Note 3
Click to expand...
Click to collapse
It's working fine through the Chomecast app for me. I haven't tried any games but everything else is smooth including 1080p videos that were recorded on my phone.
I can get it to mirror my screen through the Chromecast (not through settings) but I get no sound. How do I get sound.
Note: My chromecast is plugged into my Onkyo receiver, does that make a difference?
TabGuy said:
I can get it to mirror my screen through the Chromecast (not through settings) but I get no sound. How do I get sound.
Note: My chromecast is plugged into my Onkyo receiver, does that make a difference?
Click to expand...
Click to collapse
Probably so. I have screen mirroring working thru the Chromecast app as well and it does audio just fine. Might be something going on with that receiver. Can you remove it and try just a direct connect to the Chromecast on the TV? Haven't tried thru the Settings way.
christianpeso said:
Probably so. I have screen mirroring working thru the Chromecast app as well and it does audio just fine. Might be something going on with that receiver. Can you remove it and try just a direct connect to the Chromecast on the TV? Haven't tried thru the Settings way.
Click to expand...
Click to collapse
Turns out that power cycling the Chromecast solved the problem. I now get sound.
Reboot of Chomecast worked for me to get sound working. Also games look great!
I see no option to Mirror in the Chromecast app. It says I have the latest version.
airmaxx23 said:
It's working fine through the Chomecast app for me. I haven't tried any games but everything else is smooth including 1080p videos that were recorded on my phone.
Click to expand...
Click to collapse
Be cautious with games. My phone shut down several services and a warning screen appeared stating my phone was too hot.
Does that mirroring work directly from chromecast to phone or do you still need a wifi network to connect them both to?
Sent from my SM-N900V using XDA Premium 4 mobile app
blindside2171 said:
Does that mirroring work directly from chromecast to phone or do you still need a wifi network to connect them both to?
Sent from my SM-N900V using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You still need to use Wi-Fi.
I'm on Android 4.3, Beanstown build 6, so I can't screen cast Is there an update path I can take (possibly new ROM) that will get me 4.4 and the ability to use this new feature? (I have Chromecast app ver 1.7.4)
Could people who have it working SMOOTHLY (to me not smoothly = not working) at 1080p please post the wifi setup they are using? (Router/AP model and 2.4 or 5ghz, is it in the same room, other devices connected, port forwarding or QoS or other router config, or anything else noteworthy)
I haven't touched my chromecast in 3 months because it basically didn't work for anything I wanted to do (main thing is playing photos/videos shot with camera on a bigger screen). Back then I was using a wired router and a Asus EAN66 as wifi AP (box-claim speed of 450 mbps) sitting within 10 feet of both phone and TV/Chromecast in the same room but it was horrible - I was lucky to get maybe 20 seconds of smooth video max. Then it would crash. Much faster to transfer files to computer via usb3 or sdcard then play on TV. Similar story on a Linksys E1000 but I forget which was worse.
True smooth 1080p screen mirroring... that would be nice. Truly something that would wow people. I now have Netgear R7000 (model name "Overkill") and it's 5 feet from the TV so it really better work now! I'll report tomorrow when I can mess with it.
I had it working smoothly. First I had to update to most recent chromecast app from google play in US, then once I tried screen mirroring option in the app, it would connect to my chromecast but show nothing. After doing this the chromecast then wanted to reboot and update itself to a later software build. While it rebooted rebooted note 3 and laoded up the chromecast app, option was there to mirror to tv so I chose it and it worked flawlessly and smooth even playing games. I was using stock android TW 4.4.2 and played trials frontier. I have a netgear WNDR 3700 V1 router using 54g (2.4) to connect phone and chromecast to. The tv was like 1ms behind what was displayed on phone but still worked flawlessly. I had my phone power saving mode on and cpu power saving checked. Even with this power saving it worked great for web browsing, videos, and games. Phone did get hot and battery drained quickly! I also use WPA 2 encryption and security!
badchorizo said:
Could people who have it working SMOOTHLY (to me not smoothly = not working) at 1080p please post the wifi setup they are using? (Router/AP model and 2.4 or 5ghz, is it in the same room, other devices connected, port forwarding or QoS or other router config, or anything else noteworthy)
I haven't touched my chromecast in 3 months because it basically didn't work for anything I wanted to do (main thing is playing photos/videos shot with camera on a bigger screen). Back then I was using a wired router and a Asus EAN66 as wifi AP (box-claim speed of 450 mbps) sitting within 10 feet of both phone and TV/Chromecast in the same room but it was horrible - I was lucky to get maybe 20 seconds of smooth video max. Then it would crash. Much faster to transfer files to computer via usb3 or sdcard then play on TV. Similar story on a Linksys E1000 but I forget which was worse.
True smooth 1080p screen mirroring... that would be nice. Truly something that would wow people. I now have Netgear R7000 (model name "Overkill") and it's 5 feet from the TV so it really better work now! I'll report tomorrow when I can mess with it.
Click to expand...
Click to collapse
jengobengo said:
I'm on Android 4.3, Beanstown build 6, so I can't screen cast Is there an update path I can take (possibly new ROM) that will get me 4.4 and the ability to use this new feature? (I have Chromecast app ver 1.7.4)
Click to expand...
Click to collapse
I was running CleanRom with 4.3, and swithched to BajaRom so I could use my chromecast screenmirroring. Baja is 4.4.2 snd it worked flawlessly. Problem for me is, I dont like Baja. Im gonna go back to CleanRom 4.3 jellybean. The trade just isnt worth it for me.
Hope that helps ya.
We seem to be missing the required "Post your home screen" thread - so let me start it off !
Here's mine. I'm using HALauncher so that I can customize the home screen to my needs. I'm a big fan of HALauncher as it allows:
1 - Control over grouping and ordering. On the Shield default launcher, most-used apps go to the front of the line, so the order is always changing.
2 - Add sideloaded apps
3 - Add web page bookmarks
4 - Add wallpaper
5 - Add custom images for apps on launchers
Full Android V1.8 and I'm loving it. Takes the place of my main computer.
..
kdb424 said:
Full Android V1.8 and I'm loving it. Takes the place of my main computer.
Click to expand...
Click to collapse
dat gocchumon wa usagi desuka wallpaper tho :laugh:
I figured I'd get in on this. This is my SATV home screen. I am using Next 3D launcher and Go Weather EX for the weather widget as the SATV doesn't have the ability to use system widgets, but Next launcher can use widgets specifically built for it like task manager, music, weather, switch, and a few others.
do you need to be rooted to use a launcher, or it just that you click on the luancher icon and then it opens the new menu interface and thats it?
up
do yo uguys mouse and keyboard to navigate? isnt that annoying and takes away from using the remote etc
WHEN you use a luancher is it default... how do you set it to be default
My home screen is just stock. But I too would like to know how you got these launchers to work? And do you have to use keyboard mouse or no?
Sent from my SCH-I545 using Tapatalk
Can you seriously do evverything with this Shield thing? And what is it?
I think it's wonderful...
RemyB__ said:
Can you seriously do evverything with this Shield thing? And what is it?
I think it's wonderful...
Click to expand...
Click to collapse
Start by looking up a few reviews on YouTube and you will see the potential, pretty much play games, watch movie, TV, play music, really just about anything with the proper setup
kdb424 said:
Full Android V1.8 and I'm loving it. Takes the place of my main computer.
Click to expand...
Click to collapse
how do you benefit from a full android experience?
I am using the sideloader and it seems to work well.
Launchers maybe?
Happy Shield TV Setup
Very happy with my Shield TV setup now.
I gave the stock experience a go for a good week before getting fed up of the limitations of Android TV, despite loving the well polished user interface.
Now running full Android 5.1 (v2.2 of zulu99's build), rooted with TWRP recovery and Xposed framework installed.
With a variety of Android TV apps sideloaded from apkmirror.com, I'm now pretty close to having everything which I had before on stock:
Slick, remote-friendly launcher: HALauncher (with lovely background / wallpaper images)
SHIELD Remote as primary input / control device, 90% functional (physical buttons, volume control, audio output when heaphones connected all work, microphone doesn't work yet)
Remote-friendly TV versions of Netflix, YouTube, BBC iPlayer, Emma for Spotify and SHIELD Hub / GeForce Now
Casting entire screen (or specific cast-enabled apps such as Netflix) from Android works and performs well enough to cast an entire movie
With all the numerous advantages of having full android, such as:
Multiple user accounts / profiles (my wife's Spotify plays no longer feed into my last.fm profile, thank god!)
Fully automated video downloading setup, thanks to Pushbullet, Advanced Download Manager and Tasker
Chrome web browser, for web browsing on your TV (finally!)
Casting screen from wife's Macbook Air and/or iPhone now works too, thanks to app "AirPlay Mirroring Receiver"
Thanks to all here who have helped get me to this stage! - primarily zulu99 for his full Android build, but everyone else who has helped by sharing tips/tricks to improve various bits of the experience.
The only thing left to get working as far as I'm concerned is the SHIELD Remote microphone.
This is a really frustrating one, as it's such a nice to have feature and really makes it feel like a futuristic device when you never need to type anything again - Google's voice recognition is outstanding.
I'm also at a bit of a loss as to what to investigate next with it; I've attempted to debug the remote from my PC but could only get it to create a single uni-directional A2DP channel for audio playback.
I guess I should start trying to dig through the kernel modules included in the stock system image.
Anyway, here's the top bit of my home screen:
and a few other screenshots showing the rest of the home screen, settings and the microphone issue.
How do you change the home launcher without changing away from stock.
Almost a real Android now!
@zulu99 Full Android 5.1 (v2.2 build), rooted with Nova Launcher. Still need to install Xposed framework and a few other bits, but getting close to having a real Android now!
Loving some of the setups you guys have! I'll have to get to work on setting mine up.
andrewthecoder said:
Very happy with my Shield TV setup now.
[...]
[*]SHIELD Remote as primary input / control device, 90% functional (physical buttons, volume control, audio output when heaphones connected all work, microphone doesn't work yet)
[...]
Click to expand...
Click to collapse
Hey,
how did you manage it to have the volume buttons of the Shield TV remote working?
I am also running zulus' Full Android and paired the remote with bluetooth but the volume buttons are not working...
Did you do anything special?
A working microphone would make it just perfect
Thanks!
justkidding2009 said:
how did you manage it to have the volume buttons of the Shield TV remote working?
Click to expand...
Click to collapse
I'm actually not entirely sure, the volume slider on the remote wasn't working for me initially either.
I had written it off as something that wasn't going to work, but then noticed it was working accidentally later on after I'd set up more apps.
I believe all I did between the time where it wasn't working and started working was:
Install a few apps made for Android TV (e.g. Netflix, BBC iPlayer, HALauncher, Emma for Spotify)
Disconnect and reconnect the controller a few times
Restart the Shield TV (NSTV) a few times
If you give the above a try and the volume controls on your remote are still not working, post in my other thread about the remote and I'll try and narrow down what's making it work for me!
andrewthecoder said:
I'm actually not entirely sure, the volume slider on the remote wasn't working for me initially either.
I had written it off as something that wasn't going to work, but then noticed it was working accidentally later on after I'd set up more apps.
I believe all I did between the time where it wasn't working and started working was:
Install a few apps made for Android TV (e.g. Netflix, BBC iPlayer, HALauncher, Emma for Spotify)
Disconnect and reconnect the controller a few times
Restart the Shield TV (NSTV) a few times
If you give the above a try and the volume controls on your remote are still not working, post in my other thread about the remote and I'll try and narrow down what's making it work for me!
Click to expand...
Click to collapse
Thanks for your support.
I will test that during the weekend
Are the volume buttons for you only working inside HAlLauncher or also in the "normal" Android Launcher?
No not the xfinity tv go app....the xfinity tv app that if you are on the same WiFi as your cable box you can basically use the app as a virtual cable box in another room. I am able to load the app up, it buffers then goes right back to the android home screen, any one have any luck or similar situation with this app?
Sent from my SM-G925P using Tapatalk
Check out this thread
http://forum.xda-developers.com/nexus-player/help/xfinity-tv-t2994121
phonetec said:
No not the xfinity tv go app....the xfinity tv app that if you are on the same WiFi as your cable box you can basically use the app as a virtual cable box in another room. I am able to load the app up, it buffers then goes right back to the android home screen, any one have any luck or similar situation with this app?
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
I thought more xfinity Comcast users would be interested in this app as you would have access to your cable box/DVR, watch every channel you subscribe to without affecting anyone else watching cable on your physical cable box
https://play.google.com/store/apps/details?id=com.xfinity.cloudtvr
Sent from my AOSP on Manta using Tapatalk
Bump
Sent from my SM-N920P using Tapatalk
I need this as well. There was an update to the app a few days ago. Does it work now by side loading?
msk said:
I need this as well. There was an update to the app a few days ago. Does it work now by side loading?
Click to expand...
Click to collapse
I sideloaded the latest version of the Xfinity TV app version 3.1.0.014
The app does not support proper navigation with android tv remote as it is intended to be used on a touch interface.
You can however connect a mouse via USB OTG and use the app. I have watched around an hour of TV on the app and did not have any major issues.
It is a little buggy at times exiting and re-entering the app and I have had a force close but it is usable.
Once they update for Android TV support I will be very happy. (I am hoping they update for Android TV support. I haven't found any information to say they are for sure.)
Landon4444 said:
I sideloaded the latest version of the Xfinity TV app version 3.1.0.014
The app does not support proper navigation with android tv remote as it is intended to be used on a touch interface.
You can however connect a mouse via USB OTG and use the app. I have watched around an hour of TV on the app and did not have any major issues.
It is a little buggy at times exiting and re-entering the app and I have had a force close but it is usable.
Once they update for Android TV support I will be very happy. (I am hoping they update for Android TV support. I haven't found any information to say they are for sure.)
Click to expand...
Click to collapse
Comcast released another app update today. Hopefully it didn't break things for you, let me know how it goes, I am thinking about getting a Nexus Player for this app. I doubt they will ever support Android TV, they would be losing $10 per month from folks who are currently renting their own comcast boxes for additional TVs.
msk said:
Comcast released another app update today. Hopefully it didn't break things for you, let me know how it goes, I am thinking about getting a Nexus Player for this app. I doubt they will ever support Android TV, they would be losing $10 per month from folks who are currently renting their own comcast boxes for additional TVs.
Click to expand...
Click to collapse
I just uninstalled the previous version and installed the new version 3.1.1.019
I am not noticing any changes and it still seems to be working fine.
I have a keyboard/mouse combo connected to the Nexus Player that I use to navigate in the app which is a little clunky but does work.
I am watching some On Demand on it right now with no issues.
Landon4444 said:
I just uninstalled the previous version and installed the new version 3.1.1.019
I am not noticing any changes and it still seems to be working fine.
I have a keyboard/mouse combo connected to the Nexus Player that I use to navigate in the app which is a little clunky but does work.
I am watching some On Demand on it right now with no issues.
Click to expand...
Click to collapse
What software are you using on the nexus player?
Also have you tried using droidmote to navigate?
Sent from my SM-N920P using Tapatalk
phonetec said:
What software are you using on the nexus player?
Also have you tried using droidmote to navigate?
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
I am running stock unrooted 6.0.1 build MMB29T.
Landon4444 said:
I am running stock unrooted 6.0.1 build MMB29T.
Click to expand...
Click to collapse
Awesome, i can confirm it does work on stock, for some reason i never tried on stock, i am now going to root it to see if droidmote works as a remote for it.
Edit: droidmote works as a mouse, but the remote functions do not work inside the xfinity app
Sent from my SM-N920P using Tapatalk
has anyone figured out why the Xfinity TV app closes or how to fix this I have the newest version installed on my nexus player and on my nvidia shield and on both devices the app closes after about 10 minutes of watching a live or on demand show and goes back to the Home screen? On my fire stick the app doesn't close but I get other playback error on live channels. The TV to Go app works 100% on my correctly it never closes but it lacks a channel guide and DVR abilities so I would rather use the X1 TV app instead. any suggestions on how to get the app to stop closing back to the home screen?
as a side note for those trying to find a controller solution, I use a QQ-Tech Mini Bluetooth Keyboard W Touch pad for Android OS Windows from Amazon for about 20 bucks. I use this for all 3 of my boxes to control the Xfinity TV and TV to Go apps it works grate its about 7 inches long so about the size of a TV remote. mine is rechargeable with a light up keyboard. this will also make using Chrome and other sideloaded apps on Android TV so much easier to use.
I watched it the other day for like 2 hours and didnt have 1 issue, are you on the latest firmware on your nexus player? Also has anyone tried the update that came out today?
Sent from my SM-N920P using Tapatalk
I've got Pure Nexus running and i am having no issues with the Xfinity Go App with a Keyboard/Mouse works somewhat with the remote besides selecting anything, can only use the nexus remote as a glorified browser can go up and down left and right and back.
phonetec said:
I watched it the other day for like 2 hours and didnt have 1 issue, are you on the latest firmware on your nexus player? Also has anyone tried the update that came out today?
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
yeah I am totally up to date with firmware and the app it self on both nexus and on my Nvidia shield Android TV TV to go Works just fine its just Xfinity TV that I have this problem
---------- Post added at 05:01 PM ---------- Previous post was at 04:59 PM ----------
Noriyuke127 said:
I've got Pure Nexus running and i am having no issues with the Xfinity Go App with a Keyboard/Mouse works somewhat with the remote besides selecting anything, can only use the nexus remote as a glorified browser can go up and down left and right and back.
Click to expand...
Click to collapse
TV to GO works just fine on all my devices its the Xfintiy TV app for X1 users which crashes not the TV to GO which are 2 different apps TV to go doesn't get me access to the DVR or a Program guide for live TV
jlennonfan said:
yeah I am totally up to date with firmware and the app it self on both nexus and on my Nvidia shield Android TV TV to go Works just fine its just Xfinity TV that I have this problem
---------- Post added at 05:01 PM ---------- Previous post was at 04:59 PM ----------
TV to GO works just fine on all my devices its the Xfintiy TV app for X1 users which crashes not the TV to GO which are 2 different apps TV to go doesn't get me access to the DVR or a Program guide for live TV
Click to expand...
Click to collapse
Understood, i refuse to get X1 because right now i pay 80 Bucks for 150 Channels + HBO and 75Megabit Internet. I don't need a DVR made by them, nor do i need anything else they deem fancy. I wouldn't have Comcast at all if i could have the option, but they are the fastest within 100 feet of my location. Lot of OTA DVR Options Exist, some are like 10-15 Years Old. (The PSX Console was a PS2 with built in DVR if that says anything). i Have a hacked Roamio i use to record stuff.
phonetec said:
Awesome, i can confirm it does work on stock, for some reason i never tried on stock, i am now going to root it to see if droidmote works as a remote for it.
Edit: droidmote works as a mouse, but the remote functions do not work inside the xfinity app
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
The Xfinity TV app (not TV Go) works, but sometimes looses track of the "Home" network.
We are using a friend's login info to test it- Our 2 NP's both have M 6.0.
It will not work out of the box hardwired for channels you have not viewed before- i.e on your "previously viewed channels" list, prompts you to use your cellular data connection, but has an "allow just this time" link that will let it through a LAN.
Seems the TV (not TV Go) app keeps track of the WiFi connections and designates one a "Home".
I have renamed my 2 access points the same name, with same SSID and passwords- it worked great for a day, then started locking me out of new channels.
ES FileExplorer lets you ftp into the NP with the LAN---> Remote Manager, so I will be copying the X-TV data over and see if that works.
As a side note- I will be testing the TV Go app found here:
http://forum.xda-developers.com/showpost.php?p=63688527&postcount=39
I found this Rii that works quite well for the NP in general, and the trackpad seems very good to me, especially double-tap, hold and swipe.
http://www.amazon.com/gp/product/B00B9996LA/ref=olp_product_details?ie=UTF8&me=
I wanted a 2.4 ghz romo, because I read many comments about BT sleeping issues.
The rest of my setup has this hub-
http://www.amazon.com/gp/product/B00OCBXIY8/ref=olp_product_details?ie=UTF8&me=
and this UBS to RJ-45 adapter.
http://www.amazon.com/gp/product/B00JWXTOIA/ref=olp_product_details?ie=UTF8&me=
All work with the NP
**Edit**
Sytanek's app mod at the link above works excellent on our stock NP with M 6.0.1
Can anyone confirm the apps still work on our NPs as of today?
I am moving and the place I am heading to doesn't have other options but Comcast... this would be great in cutting some of those "rental fees" on additional cable boxes.
I can't get Xfinity TV to work on my Galaxy Tab 3 10.1 with cyan 13.0....just buffers then returns
I need little help here. I installed the app and when i click get started it redirects to dolphin browser and when i log in i get some error message. I can't get this app working.
Has anyone had any success screen mirroring to either Chromecast or a Samsung smart TV? If so, are you rooted or stock? If rooted, what ROM?
When I try screen mirroring through my Samsung smart TV the video comes through, but the sound does not. When I try through Chromecast, it disconnects immediately when I try to connect.
So...no one can reply after all this time?
LvDisturbed1 said:
So...no one can reply after all this time?
Click to expand...
Click to collapse
I would test, but my 3 year old, in the past week in a half, broke both my chrome cast (not waterproof) and my 55" Sammy (die-cast Lightning McQueen)... My panasonic and LG are both stupid TV's... Sorry I can't help... But I do feel better now that I've vented a little...
I have been able to cast to my Chromecast on both my Sony 46" and my 32" Emerson with no problems. I have an older Chromecast(purchased just 2 weeks before the new ones can't out). Will try mirroring to my Sony when I get home. I can also cast if the Chromecast is connected directly to our Skny home theater system.
I am able to Miracast to my Samsung Smart TV. It occasionally disconnects and has some noticeable delay but otherwise works fairly well. Haven't a Chromecast to test with though. I am rooted with the stock ROM for the record.
no issues here.. try this..
be sure phone is in portrait mode when you initiate screen mirroring. Once connected, than turn landscape. Regarding chromecast, once connected DO NOT use home button 2 escape, just hit back button a few times..
Sent from my LG-H901 using Tapatalk
Does Remix OS support this? I installed it on two Windows PC's that can use Miracast just fine, but I can't find it anywhere in settings.
While it was originally touted in the Ultra tablet kickstarter it has not worked on Ultra Tablets since v1 software and currently does not work on either. I have tickets turned into the for both the Ultra Tablet and mini. They also do not mirror via Google casting Chromecast on the new Chromecast device.
Sent from my SHIELD Tablet using Tapatalk
That's too bad. Between this and lack of support for a second display connected by a cable, Remix is pretty useless to me. Hopefully they get this fixed soon.
Casting to chromecast works fine; not 100% sure with miracast devices though but can't see why they wouldn't.
Edit. Casting works; but casting screen seems to have issues.
HypoTurtle said:
Casting to chromecast works fine; not 100% sure with miracast devices though but can't see why they wouldn't.
Edit. Casting works; but casting screen seems to have issues.
Click to expand...
Click to collapse
I installed an app that essentially just makes a shortcut to the Casting menu (since I couldn't find it under Settings anywhere). I can flip the toggle for wireless displays to On. I have both a Netgear PTV and Roku, but it won't detect them.
In the past miracast worked on both Roku and Belkin miracasters but not for me since 1.0 got the new Chromecast and can cast from cast enabled apps like Pandora etc...no mirroring though.
Sent from my SHIELD Tablet using Tapatalk
7inchTab said:
In the past miracast worked on both Roku and Belkin miracasters but not for me since 1.0 got the new Chromecast and can cast from cast enabled apps like Pandora etc...no mirroring though.
Sent from my SHIELD Tablet using Tapatalk
Click to expand...
Click to collapse
And unfortunately mirroring is what I need.
rainking430 said:
I installed an app that essentially just makes a shortcut to the Casting menu (since I couldn't find it under Settings anywhere). I can flip the toggle for wireless displays to On. I have both a Netgear PTV and Roku, but it won't detect them.
Click to expand...
Click to collapse
*same, that screen does pick up my chromecast but screencasting errors out.
Edit. @rainking430; try adding persist.debug.wfd.enable=1 to /system/build.prop and see if that enables anything.
HypoTurtle said:
@rainking430; try adding persist.debug.wfd.enable=1 to /system/build.prop and see if that enables anything.
Click to expand...
Click to collapse
I can try it later when I have my laptop, but I'm noobish at this sort of thing in Android. How do you do that? Or is it form within Windows?
rainking430 said:
I can try it later when I have my laptop, but I'm noobish at this sort of thing in Android. How do you do that? Or is it form within Windows?
Click to expand...
Click to collapse
Either. From Windows is probably simpler; open system.img with RMXTools; add that line to bottom of build.prop, then close and try it.
Thanks, will try in a little bit.
HypoTurtle said:
Either. From Windows is probably simpler; open system.img with RMXTools; add that line to bottom of build.prop, then close and try it.
Click to expand...
Click to collapse
Ok, tried it, everything with RMXTools went fine, the line was added, but no change. I can go into the Casting menu via an app/shortcut and toggle Wireless Displays, but none are detected.