I have an Infinix Note 3 X601, updated to Android N, Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem began when I tried to factory reset it from within the settings, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. if i connect it to pc, the pc wont recognise it, the pc will show a message that the USB device is not recodnisd, and the phone will boot to recovery again.
i tried to reflash the stock firmware using sp flashtool and it always fails as the system will not recognise the phone, even though i have the required mtk drivers installed.
i tried to flash this https://androidhq254.blogspot.com.ng/2017/04/mad-aosp-n-711-for-infinix-note-3-x601.html and http://bbs.infinixmobility.com/thread-149453-3-1.html custom roms using the custom recovery, they all fail mid way.
i will appreciate any help i can get in reviving this phone. thanks in advance
i have a. zuk z1 i did something like this and the phone got bricked I then tried installing other roms and also backups but the phone only boots upto recovery..
i unbricked the phone using "qpst tool" see if your phone have something like that
arn2641 said:
i have a. zuk z1 i did something like this and the phone got bricked I then tried installing other roms and also backups but the phone only boots upto recovery..
i unbricked the phone using "qpst tool" see if your phone have something like that
Click to expand...
Click to collapse
thanks for the reply, could you elaborate on the "qpst tool" pls, i dont know much about it
qpst is a kind of software
that enable us to use a port in the phone to install firmware and others software when something like this happens...
some manufacturers like Samsung manufacture in such a way that this cannot be used,
depending upon your manufacturer and the processor(it mainly support snapdragon i think) you may get if you search in Google.
arn2641 said:
i have a. zuk z1 i did something like this and the phone got bricked I then tried installing other roms and also backups but the phone only boots upto recovery..
i unbricked the phone using "qpst tool" see if your phone have something like that
Click to expand...
Click to collapse
when i try to flash a rom through recovery it shows:
mount system partition
mount: failed to mount /dev/block/platform/mtk-mdc.0/11230000.mdc.0/by-name/system at /system: no such file or directory
unmount system partition
unmount of /system failed: no such volume
format system partition
E:Error in /storage/sdcard/........
(status0)
installation aborted
what do you make of this pls?
Related
I tired to restart phone after noticing that WI-FI isn't working (maybe my internet was laggy, don't know). After restarting phone was stuck on LG logo, i tried many times but again LG logo.
Then i started recovery, and wanted to flash some new ROM. But my CWM won't recoginze my SD card (to add, i wasnt using SD card with this phone). I tried other SD but problem stays. I google it and found out that maybe CWM needs update?
Version of CWM Recovery v6.0.3.1
This shows up when recovery starts..
E:Cant mount / cache/recovery/command
E:Cant mount / cache/recovery/log
E:Cant open / cache/recovery /log
E:Cant mount / cache/recovery/last_log
E:Cant open / cache/recovery/last_log
How to unbrick phone now?
Unfortunatly don't know what ROM was flashed before, or is bootloader unlocked or not. (coming from LG 3D, LG l9 was present. LG 3d methods for flashing is diffrent, so im little confused how to start anything now)
To add that phone now cannot turn on without charger pluged in. Powering on was OK in first few time...
First and important question. Did you unlock your booloader? If yes, you can install cutom roms. If not, you can't install custom roms.
Did you also try to enter SV mode?
1. Power off phone
2. Press and hold volume up
3. Connect phone by usb to PC
4. Wait few sec
5. SV mode should appear.
When you are in SV mode, you can restore stock rom by official LG program.
Rammar515 said:
First and important question. Did you unlock your booloader? If yes, you can install cutom roms. If not, you can't install custom roms.
Did you also try to enter SV mode?
1. Power off phone
2. Press and hold volume up
3. Connect phone by usb to PC
4. Wait few sec
5. SV mode should appear.
When you are in SV mode, you can restore stock rom by official LG program.
Click to expand...
Click to collapse
I started S/W upgrade, and in upper corner it says Bootloader Status: unlocked. So bootloader is unlocked for sure then..
If i manage to update CWM will that solve my problem with SD card? After that just to flash ZIP from recovery?
O something else?
ratluci said:
I started S/W upgrade, and in upper corner it says Bootloader Status: unlocked. So bootloader is unlocked for sure then..
If i manage to update CWM will that solve my problem with SD card? After that just to flash ZIP from recovery?
O something else?
Click to expand...
Click to collapse
I dont know but you should update cwm to 6.0.4.5+ After it you will be able to install all roms from 4.2-5.0.
Rammar515 said:
I dont know but you should update cwm to 6.0.4.5+ After it you will be able to install all roms from 4.2-5.0.
Click to expand...
Click to collapse
Thanks, now really noob question..
I googled how to update recovery on L9, and found methods with installing some APK, but as i cannot start system how to flash then?
There is 2 ways to install new recovery.
You can flash .zip in old recovery, reset phone and you will have new recovery.
You can also flash new recovery by fastboot. You need to have .img recovery.
Can you reset to fastboot in recovery options?
Rammar515 said:
There is 2 ways to install new recovery.
You can flash .zip in old recovery, reset phone and you will have new recovery.
You can also flash new recovery by fastboot. You need to have .img recovery.
Can you reset to fastboot in recovery options?
Click to expand...
Click to collapse
Not sure how to enter fastboot. Cannot see restart to fastboot in CWM..
You can try to enable adb in recovery and use command "adb reboot oem-unlock"
Rammar515 said:
You can try to enable adb in recovery and use command "adb reboot oem-unlock"
Click to expand...
Click to collapse
I cannot start fastboot, dont know how, something doing wrong. On CWM i only have, install zip with sideload (something like that)
Can i flash to stock rom from S/W menu? And what i need if can?
You need phone + usb + pc + lg flash tool (just download it) Connect your phone with SV mode and let program find rom, download and install it.
Rammar515 said:
You need phone + usb + pc + lg flash tool (just download it) Connect your phone with SV mode and let program find rom, download and install it.
Click to expand...
Click to collapse
Not sure what to try next.
I tried this http://forum.xda-developers.com/showthread.php?t=2085344 stays on 15%, and PC cannot see phone
this http://forum.xda-developers.com/showthread.php?t=2797190 , someone sad that this worked becaause first method didnt (was same problem as mine, how i understaned ..)
and tried this http://forum.xda-developers.com/showthread.php?t=2748384 , stuck after 6 sec (something like that). I readed that maybe BIN was corrupted (because of conversion from KDZ to BIN), now ill try with thid BIN http://uploaded.net/file/j32p8p7y/from/xh3dqq ...
What next.. S/W mode says Bootloader unlocked, and before all this phone was using JB..
I still didn't succeded to recover my phone.
My computer simply cannot see my phone, i tried all tools that were avalible. On 3% to 7% (on updating), just says that phone is not connected.
Strange thing is that i managed to flash V20H_00.kdz two times. Every single time i do the same but only that 2 times flash was successful. One time was with "offline method" and then with "LG flashtool 2014", after that flashing i got dead android with red triangle both times.
Then i wanted to flash v20c_00.kdz , but cannot pass 3% to 7% on flashing AGAIN. I'm frustrated !
I tried to flash on other computer but again, phone is not recognisable.
What to do now?
Can i flash ROM with fastboot ?
UPDATE.
I started upgrade recovery with LGMobile support tool, and finished flashing. But AGAIN i got dead android with red triangle!
Now what to try!?
Update
I even tried to flash ROM on WIN XP, but nothing. Again proces stops on 3% (then quckly) jump to 7%. And thats it.
Strange thing that when i start UPGRADE RECOVERY on Official LG TOOL (i think thats official), program download 500mb+ KDZ and process is successful, but i get Dead Android with red triangle..
Anyone have any advice? What to try?
I tried to install a new rom(cynogenmod 11 from xda forums) in my lenovo a6000 which i god a day before on my birthday. it had lollipop os and i installed TWRP recovery in it. but the instructions for installing rom said to clear data. dalvik, cache before installing and the twrp cleared cache and delvik cache but then it had been over 5 min and it still stated -"formatting data by mounting(bla... bla...) method". so i just reboot the phone by removing the battery and booted in the recovery again. i tried to clear them again but this time all of those three stated mounting problems while clearing. i went on installing the rom but it stuck too stating only these lines:-
1>no md5 checksum found.
2>skipping md5 checksum(bla.. bla...).
so i did the same mistake again and removed the battery to reboot but now it just shows the lenovo logo on bootup and nothing happens thereafter except frequent restarts. i tried to connect it to pc to load recovery via minimal adb and fastboot but the phone is just charging itself via usb cable and not connecting to the pc no matter i reinsert the battery.
i dont want to reach the service center or my dad will kill me for damaging a new phone. please if anyone can help then reply soon or i am gonna screwed.
Just press volume - & power key same time , now your phone is in boot loader mode now connect USB & flash twrp recovery through minimal adb method & restore your backup
Sent from my Lenovo A6000 using XDA Free mobile app
To be continued
Oh I somehow figures it out, I pressed all the keys I.e. volumeup + volumedown + power key even after the Lenovo powered by android logo and it suddenly booted into recovery. This method worked in my bq s37 I didnt expected it in this case. BTW thanks for your support and can u please help in in a new case related to same. The twrp recovery for a6000 lollipop is not installing cm11 properly. Every time I install using the same method as mentioned in a post of XDA. After installation it stops on the same screen:- Lenovo (powered by android) and after that no reboot just that screen forever till the battery dies. I even tried cleaning /system before installing cm11 ROM but still no progress. Please help!
You cannot install cm11 on top of stock Lollipop rom
Revert it back to kitkat flash recovery Then install cm11
Get it of one problem and the other awaits. Now when installing KitKat rom (the official one from techotally) it said unable to mount /data. I followed some tutorial which asked to write some codes from adb shell menu. One of the codes said something like -kill recovery, after what my recovery frooze. I restarted the phone by removing the battery but nothing is happening after that. I am trying to restart it in recovery or in bootloader or even normal restart. Everything in vain and nothing is shown on screen and not even boot logo or the lenovo powered by Android screen. But in my pc some drivers started installing out of which two were installed and two weren't please help.
Ahmad Tawfik said:
Follow this guide
QUOTE]
There is said that ensure the devise is connected as Qualcomm his 9008 drivers but for me windows iinstalls 9006 drivers and States failed to verify signature. I manually installed the 9008 drivers . the installed properly without error but in not cases m getting sahara error. Failed to download. Also my phone doesn't display anything, no display, no sound and no vibrating while powering on but the PC connats it as as Qualcomm hs..............
Click to expand...
Click to collapse
*in both the cases*
Ok I will help you
1- Download stock Lollipop firmware and place it in your sd and insert it in your phone
http://phonedl.ota.lenovomm.com/dls/v6/Kraft-A6000_S054_150915_WCAA.zip
2-hold volume down and power key and you will see fastboot under powered by Android
3- use fastboot to flash and boot into stock Lollipop recovery
Fastboot flash recovery recovery.img
Fastboot boot recovery.img
http://www.mediafire.com/download/gcg2klu8fwam2sk/Recovery.img
4- in Stock recovery factory rest and wipe cache partition
5- apply update from Sd and select the stock Lollipop firmware the you placed on SDCard
6- Done your phone will boot to system successfully
If you want to install cm11 after fixing your phone
1-revert to kitkat stock firmware follow the guide (like the phone is bricked)
2- Install twrp recovery by fastboot
http://lenovo-forums.ru/index.php?app=core&module=attach§ion=attach&attach_id=36985
3- Install cm11 and enjoy
Note:
place the files you want to fastboot in the fastboot folder
Sent from my GT-I9300I using Tapatalk
You are not correctly getting it my friend. i said the phone doesnt boot at all no matter what key combinations are tried. it simply doesnt start. no display no vibration no sound nothing just the pc detects it as qualcomm hsusb.........
BTW in the mean time my father got to know about this condition. he scolded me but asked to fix it if i can before going to service center. i was just thinking what if they got to know that i rooted the phone? or installed custom recovery in it? anyway if i am to go to the service center the statement given by me will be that:- while updating via ota from kitkat to lollipop the battery died and this all happened. an yes i live in INDIA time zone=+5:30 GMT so tell me when i can find you online(time?) my friend so we can try fixing my phone also it will be help full if we become friends on facebook? so that we can chat live clearly and for as long as we want. so that i can ask you about any problem occouring in future directly without creating a forum in xda. so please buddy please....... .... .. .
The Boy Who Cried Wolf said:
You are not correctly getting it my friend. i said the phone doesnt boot at all no matter what key combinations are tried. it simply doesnt start. no display no vibration no sound nothing just the pc detects it as qualcomm hsusb.........
BTW in the mean time my father got to know about this condition. he scolded me but asked to fix it if i can before going to service center. i was just thinking what if they got to know that i rooted the phone? or installed custom recovery in it? anyway if i am to go to the service center the statement given by me will be that:- while updating via ota from kitkat to lollipop the battery died and this all happened. an yes i live in INDIA time zone=+5:30 GMT so tell me when i can find you online(time?) my friend so we can try fixing my phone also it will be help full if we become friends on facebook? so that we can chat live clearly and for as long as we want. so that i can ask you about any problem occouring in future directly without creating a forum in xda. so please buddy please....... .... .. .
Click to expand...
Click to collapse
My Facebook is [email protected]
I prefer hangout
[email protected]
Contact me any time and I will try to reply directly
Sent from my GT-I9300I using Tapatalk
After flashing the firmware link given by u , Ota will work or not ?
Sent from my Lenovo A6000 using XDA Free mobile app
amit1009000 said:
After flashing the firmware link given by u , Ota will work or not ?
Sent from my Lenovo A6000 using XDA Free mobile app
Click to expand...
Click to collapse
It will work and also this is the latest update
Sent from my GT-I9300I using Tapatalk
I know but only this update is not installing in my device 138mb , so i thinking to flash the full lolipop with this update by ur given link . can i do it ?
Sent from my Lenovo A6000 using XDA Free mobile app
amit1009000 said:
I know but only this update is not installing in my device 138mb , so i thinking to flash the full lolipop with this update by ur given link . can i do it ?
Sent from my Lenovo A6000 using XDA Free mobile app
Click to expand...
Click to collapse
Yes
Sent from my GT-I9300I using Tapatalk
Ahmad Tawfik said:
Ok I will help you
1- Download stock Lollipop firmware and place it in your sd and insert it in your phone
2-hold volume down and power key and you will see fastboot under powered by Android
3- use fastboot to flash and boot into stock Lollipop recovery
Fastboot flash recovery recovery.img
Fastboot boot recovery.img
-- in Stock recovery factory rest and wipe cache partition
5- apply update from Sd and select the stock Lollipop firmware the you placed on SDCard
6- Done your phone will boot to system successfully
If you want to install cm11 after fixing your phone
1-revert to kitkat stock firmware follow the guide (like the phone is bricked)
2- Install twrp recovery by fastboot
http://lenovo-forums.ru/index.php?app=core&module=attach§ion=attach&attach_id=36985
3- Install cm11 and enjoy
Note:
place the files you want to fastboot in the fastboot folder
Sent from my GT-I9300I using Tapatalk
Click to expand...
Click to collapse
But why don't u understand that I can not boot in any mode the danm phone simply doesn't display anything no sound or vibrations and no change of mode too.just connected as quallcomm hsusb and nothing else and even with that and following the ways in the link provided before(boycracked unbrick a6000) I'm getting sahara download error.
Not Install
Dear
Ahmed
When I am try to install the zip its give an erro
phone does not switch to carrier can not install
status (101)
installation abbroat
Please help to install it.
amit1009000 said:
Dear
Ahmed
When I am try to install the zip its give an erro
phone does not switch to carrier can not install
status (101)
installation abbroat
Please help to install it.
Click to expand...
Click to collapse
You have to install it from stock recovery and to factory reset and wipe cache partition before installing the zip
Lenovo updates are very bad and may soft brick you phone
Sent from my GT-I9300I using Tapatalk
install
i tried with stock recovery but same problem.
So it seems I'm being ignored
Hey ahmed
Hi I have moto G 2015 osprey XT1541, its unlocked running cyanogenmod
I recently upgraded to CM 14 experienced problems instantly, all the google apps wpuld crash.
Reverted back to CM 12 which worked and it had an error whilst upgrading in recovery,
something like
E:Failed to map file
E:Error exit from the fuse process :0
Installation Failed Installation Aborted
I have tried multiple roms, all come back with same error message. The recovery on the phone is the cyanogenmod one. Also in recovery if I do system reset I get
E: Failed to mount /data (permission denied)
I am having to try installing roms via sdcard as the phone is not recognised by my computer.
Any Ideas?
I would format userdata in bootloader then install TWRP and use that to install the next rom.
es0tericcha0s said:
I would format userdata in bootloader then install TWRP and use that to install the next rom.
Click to expand...
Click to collapse
How do I format userdata? I dont have that option in the bootloader. When I try to install anything using cyanogemod recovery including TWRP I get the same error message.
fastboot format userdata
fastboot format cache
If that doesn't work then you'll want to go back to complete stock with the original firmware for your variant (and carrier if yours came from one originally).
The phone cannot connect to PC with USB for some reason. So I cant use fastboot. I know its not the cable/PC as it works with my tablet so must be the phone.
I have tried wiping data and factory reset in recovery and this does not solve the problem, still stuck in boot loop and recovery cannot flash any roms.
AndyGLowe said:
The phone cannot connect to PC with USB for some reason. So I cant use fastboot. I know its not the cable/PC as it works with my tablet so must be the phone.
I have tried wiping data and factory reset in recovery and this does not solve the problem, still stuck in boot loop and recovery cannot flash any roms.
Click to expand...
Click to collapse
Check out the Device Manager (assuming you're using Windows...) and see if the driver is loading correctly. If not, you should be able to manually update the driver. This is the most common problem that would cause this. Even if the phone is borked, fastboot mode should work and the PC should be able to load the drivers. If that fails, try other ports on your PC or another PC altogether.
Uninstall all the Moto drivers, reboot, reinstall and look into RSD Lite if all else fails.
es0tericcha0s said:
Check out the Device Manager (assuming you're using Windows...) and see if the driver is loading correctly. If not, you should be able to manually update the driver. This is the most common problem that would cause this. Even if the phone is borked, fastboot mode should work and the PC should be able to load the drivers. If that fails, try other ports on your PC or another PC altogether.
Uninstall all the Moto drivers, reboot, reinstall and look into RSD Lite if all else fails.
Click to expand...
Click to collapse
I doesn't even show in Device Manager, I have tried another system with Win 7 on and that comes up with a notification saying a unrecognised device has been attached. But it doesn't make a difference if you install the drivers or look in device manager, had exclamation mark next to device but you cant do anything. I also have Ubuntu dual loaded on this system and that doesn't recognise it either.
Same issue on Xperia ZL... This CM14 ruined my phone.. exactly same issue... Some one help plzzzzzzzzzzzzzzzz
sahil soni said:
Same issue on Xperia ZL... This CM14 ruined my phone.. exactly same issue... Some one help plzzzzzzzzzzzzzzzz
Click to expand...
Click to collapse
did you guys solve your problem I have the same exact issues?
i have le 1s eco and today i wiped system data and all other things.... then it shows me no os found......after that i tried whole day........all mathod tried then at last i tried usb otg in twrp recovery and then i selected otg memory and agin menu comes asked internal or otg then again i selected otg memory to mount and after selecting otg it goes black.....i think i have choose os on otg so now no recovery no fastboot mode no logo nothing comes only red light when charge lit please help me is there any way......and now will sc guys can do it or they also cant
scorpianj50 said:
i have le 1s eco and today i wiped system data and all other things.... then it shows me no os found......after that i tried whole day........all mathod tried then at last i tried usb otg in twrp recovery and then i selected otg memory and agin menu comes asked internal or otg then again i selected otg memory to mount and after selecting otg it goes black.....i think i have choose os on otg so now no recovery no fastboot mode no logo nothing comes only red light when charge lit please help me is there any way......and now will sc guys can do it or they also cant
Click to expand...
Click to collapse
someone please reply to me
No os found means that you wiped your partitions like data,system. A simple nandroid restore will do
Devmountsu77 said:
No os found means that you wiped your partitions like data,system. A simple nandroid restore will do
Click to expand...
Click to collapse
i have tried all adb push sideload all and last i made a big mistake i want to install through otg and then i selected otg memory in twrp and then all went black not even starting mobile now and no fastboot no recovery menu opening
scorpianj50 said:
i have tried all adb push sideload all and last i made a big mistake i want to install through otg and then i selected otg memory in twrp and then all went black not even starting mobile now and no fastboot no recovery menu opening
Click to expand...
Click to collapse
You need to flash stock ROM with odin
Devmountsu77 said:
You need to flash stock ROM with odin
Click to expand...
Click to collapse
but my phone is not detecting by pc because it is not getting on
Which partitions did you wipe? If you wiped the wrong ones you hard bricked your phone
Devmountsu77 said:
Which partitions did you wipe? If you wiped the wrong ones you hard bricked your phone
Click to expand...
Click to collapse
i have wiped all stuff which available in twrp system data and cache delvik cache etc
It your USB flash drive,if the screen goes black the flash drive has problems. Do you have another flash drive by any chance? I know you said the PC isn't detecting the phone but try putting it in recovery mode again and mounting all the partition and see if your flash drives work. If you have no success unfortunately you have a hard bricked device
Devmountsu77 said:
It your USB flash drive,if the screen goes black the flash drive has problems. Do you have another flash drive by any chance? I know you said the PC isn't detecting the phone but try putting it in recovery mode again and mounting all the partition and see if your flash drives work. If you have no success unfortunately you have a hard bricked device
Click to expand...
Click to collapse
yes i have hard bricked it is there any way to get rid of it......
It could be possible just a bit hard,let me do some research on this phone and then I'll tell you how to unbrick
Devmountsu77 said:
It your USB flash drive,if the screen goes black the flash drive has problems. Do you have another flash drive by any chance? I know you said the PC isn't detecting the phone but try putting it in recovery mode again and mounting all the partition and see if your flash drives work. If you have no success unfortunately you have a hard bricked device
Click to expand...
Click to collapse
after spending lots of time it gets in fastboot mode and recovery but in recovery everytime it shows md5 error or zip verification failed tried 3-4 roms......and
Devmountsu77 said:
It could be possible just a bit hard,let me do some research on this phone and then I'll tell you how to unbrick
Click to expand...
Click to collapse
and via fastboot mode how to flash zip file fastboot only flash img file how to get rom in img format
Please help, a few days ago my phone decided to stop working for no reason, so I thought it was a ROM problem(I was running Android Pie AOSP Extended). So I reset it, after resetting it the phone was stuck at the LeEco logo, so I decided to use the 9008 mode flashing it, but no matter what I do it always come up with the error Download Fail:Sahara Fail:QSaharaServer Failrocess fail
So I don't know what to do, please help.
Did you tried flashing Twrp first in instead of qsahara sometime they give error
They show error also when partitions are messed up so may be u changed partition settings
So try installing Twrp and rewriting partitions then use a pendrive and mount it in Twrp and install a simple room for example AEX and try to boot otherwise try side loading the rom
If u r possible to boot into twrp format device and install any ROM zip through pendrive
I cannot even exit 9008 mode, the phone is completely dead with no respond when pressing any button combination, but it shows up as Qualcomm HS-USB QDLoader 9008 when I plugged in to my PC, and it also doesn't show up when using the ADB devices command. And thanks for replying
Can you add photos of what error it is showing when trying to boot into fastboot mode
https://drive.google.com/file/d/12jmHM0f50WFMMXeeZWxLq9LkdAg6magp/view?usp=sharing
This is the error it is giving me while trying to unbrick it, and the phone seems to be charging since my charging block is heating up.
MrNotJeff said:
https://drive.google.com/file/d/12jmHM0f50WFMMXeeZWxLq9LkdAg6magp/view?usp=sharing
This is the error it is giving me while trying to unbrick it, and the phone seems to be charging since my charging block is heating up.
Click to expand...
Click to collapse
Ok, first, dont give up, 2nd have you put phone into qfil mode as program told you? 3rd check if inside this zip is not 2nd zip, some packages are "double zipped".
MrNotJeff said:
https://drive.google.com/file/d/12jmHM0f50WFMMXeeZWxLq9LkdAg6magp/view?usp=sharing
This is the error it is giving me while trying to unbrick it, and the phone seems to be charging since my charging block is heating up.
Click to expand...
Click to collapse
I had a practically the same problem with Xiaomi Redmi Note 5 Pro (Chinese model)
Inside the zip file there is a file (or two of them) responsible for uploading the ROM. It first sends one of those files and the Qualcomm loader puts it in RAM and boots that file.
If successful, the upload continues, but if that file is wrong, it will not boot it and will not load. So the zip file you have may not be for the exact model of your phone. Try to find another one, maybe a different version...
Hope this helps.
Sent from my GM1900 using Tapatalk