First I'm so sorry if my question is similar with another threads. But I'm pretty sure I have been looking for the answer around the internet and of course XDA developer for a week. I follow every guide and method I found. But it still not answer of my problem.
I flashing camera driver I've got from my friend backup using TWRP backup. Actually I only need to choose uboot only to install. But I'm in hurry so I accidentally choose everything includes NVRAM. Since then I've got wrong IMEI on my phone because the IMEI overwritten with my friend phone. But it's not a problem because I can restore my original IMEI with MTKDroid & Tools.
And the problem is my IMEI is now back and corrected. But there is no network detected on the phone. SIM card detected fine. When I go to EngineerMode by pressing *#*#3646633#*#* and open Radio Information on CDS I saw IMSI field was unknown and Radio Status is turning on and off rapidly.
What I have done is :
1. Full flashing with the stock ROM via SP Flash Tools.
2. Change the IMEI with MTK Droid Tools
3. Change the IMEI with AT command ... echo 'AT+EGMR=1,7,"myIMEI1"' >/dev/pttycmd1
No result. IMEI is correct but no network.
I believe this is not a hardware problem, so please help me to solve this problem. Because it's my only phone to communicate with my whole families. I really appreciate with your help. Thanks.
Good day People,
I don't want to beat around the bush so, I installed customROM works fine. then I reverted back to stockROM then IMEI is gone.
I tried the Engineering mode thing, I tried multiple IMEI Writers non of them works for me. I always have this error "meta mode entry fail" for some reason I don't know what to do.
I do have an MTK Based phone its dual Sim.
MT6582
Cherry Mobile Fuze Q390
Can someone help me. I don't know if I am on the right thread but it says ask anything.
Thanks in Advance.
phaw16 said:
Good day People,
I don't want to beat around the bush so, I installed customROM works fine. then I reverted back to stockROM then IMEI is gone.
I tried the Engineering mode thing, I tried multiple IMEI Writers non of them works for me. I always have this error "meta mode entry fail" for some reason I don't know what to do.
I do have an MTK Based phone its dual Sim.
MT6582
Cherry Mobile Fuze Q390
Can someone help me. I don't know if I am on the right thread but it says ask anything.
Thanks in Advance.
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=2400829
Press Thanks if helped.
hnkotnis said:
Try this
http://forum.xda-developers.com/showthread.php?t=2400829
Press Thanks if helped.
Click to expand...
Click to collapse
I WHOLE formatted my Cherry Mobile Fuze Q390 (MT6582) with SP Flash Tool. Then I flashed the official firmware of this device with SP Flash Tool. I don't have any backups because I am reverting to stock. Now the phone works fine but it does NOT detect the SIM card. Also, the IMEI is shown as "INVALID" for both SIM slots when I input *#06#. When I try to fix IMEI from MTK Droid Tools it shows (ERROR : pttycmd1 device NOT found!). Also, MTK Droid Tools shows (Baseband V -----). I am sure the problem is that when I formatted the phone it wiped the NVRAM region too. So the device has no baseband or radio files right not and also the data/nvram/md folder has nothing in it. Although, WiFI still works perfectly except the annoying NVRAM Warning that I kept on seeing when ever that I wanted to connect to a network. Now the official firmware of Cherry Mobile Fuze Q390 does not contain any nvram.bin file. It does contain the BPLGU file but I can't seem to modify IMEI with SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. I tried using the MTK Engineering mode mode also and tried to write it using the AT+ code but it keeps on saying failed to send command. Probably the SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. only modify the IMEI when the baseband or radio files are already present on the phone. So I think the only way out for me is to flash a nvram.bin using SP Flash Tool or Flash nvram.bin+nvram.tar to MTK Droid Tools which I don't have. Any ideas whether I am on the track or not? If I am, then how can I get the IMEI back on my phone. As you people can see that I have tried a lot of things, so please suggest/advice accordingly and any help would be greatly appreciated.
phaw16 said:
I WHOLE formatted my Cherry Mobile Fuze Q390 (MT6582) with SP Flash Tool. Then I flashed the official firmware of this device with SP Flash Tool. I don't have any backups because I am reverting to stock. Now the phone works fine but it does NOT detect the SIM card. Also, the IMEI is shown as "INVALID" for both SIM slots when I input *#06#. When I try to fix IMEI from MTK Droid Tools it shows (ERROR : pttycmd1 device NOT found!). Also, MTK Droid Tools shows (Baseband V -----). I am sure the problem is that when I formatted the phone it wiped the NVRAM region too. So the device has no baseband or radio files right not and also the data/nvram/md folder has nothing in it. Although, WiFI still works perfectly except the annoying NVRAM Warning that I kept on seeing when ever that I wanted to connect to a network. Now the official firmware of Cherry Mobile Fuze Q390 does not contain any nvram.bin file. It does contain the BPLGU file but I can't seem to modify IMEI with SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. I tried using the MTK Engineering mode mode also and tried to write it using the AT+ code but it keeps on saying failed to send command. Probably the SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. only modify the IMEI when the baseband or radio files are already present on the phone. So I think the only way out for me is to flash a nvram.bin using SP Flash Tool or Flash nvram.bin+nvram.tar to MTK Droid Tools which I don't have. Any ideas whether I am on the track or not? If I am, then how can I get the IMEI back on my phone. As you people can see that I have tried a lot of things, so please suggest/advice accordingly and any help would be greatly appreciated.
Click to expand...
Click to collapse
Hello can you provide me a link where i can download cherry mobile fuze stock firmware thanks you very much
phaw16 said:
I WHOLE formatted my Cherry Mobile Fuze Q390 (MT6582) with SP Flash Tool. Then I flashed the official firmware of this device with SP Flash Tool. I don't have any backups because I am reverting to stock. Now the phone works fine but it does NOT detect the SIM card. Also, the IMEI is shown as "INVALID" for both SIM slots when I input *#06#. When I try to fix IMEI from MTK Droid Tools it shows (ERROR : pttycmd1 device NOT found!). Also, MTK Droid Tools shows (Baseband V -----). I am sure the problem is that when I formatted the phone it wiped the NVRAM region too. So the device has no baseband or radio files right not and also the data/nvram/md folder has nothing in it. Although, WiFI still works perfectly except the annoying NVRAM Warning that I kept on seeing when ever that I wanted to connect to a network. Now the official firmware of Cherry Mobile Fuze Q390 does not contain any nvram.bin file. It does contain the BPLGU file but I can't seem to modify IMEI with SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. I tried using the MTK Engineering mode mode also and tried to write it using the AT+ code but it keeps on saying failed to send command. Probably the SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. only modify the IMEI when the baseband or radio files are already present on the phone. So I think the only way out for me is to flash a nvram.bin using SP Flash Tool or Flash nvram.bin+nvram.tar to MTK Droid Tools which I don't have. Any ideas whether I am on the track or not? If I am, then how can I get the IMEI back on my phone. As you people can see that I have tried a lot of things, so please suggest/advice accordingly and any help would be greatly appreciated.
Click to expand...
Click to collapse
hey dude .did your phone fix??
a114 user mt6582
hi dude did u resolve that ..now i got that problem man ..the thing which happend to u turned to me just formatted completley and now suffering...searching solutions for two days....jus tell me if u find the solution dude ... email to [email protected]
we have a same problem.
I fixed my phone (FUZE) ... .
just flash the phone in Firmware with "SEC_RO" file.
Fix IMEI, at least for MT6589 Gigabyte GSmart Aku A1 (if *#06# show Invalid IMEI):
Call *#*#3646633#*#* Engineer mode, Connectivity, CDS Info, Radio Info,
Phone 1: AT+EGMR=1,7,"myIMEI" <send>
Phone 2: AT+EGMR=1,10,"myIMEI2" <send>
Hello @phaw16, @nandhu.crab19 : Can you resolve that problem?
I have the same here my phone is Blu Dash 5.5 D470u with mt6582 processor.
The meta mode is failed to connect. Drivers are ok.
HI, I have an MT6582 phone without nvram folder, in my phone the serial number is necessary for OTA updates, but I lost it with the format option in SP flashtool.
I have a nvram folder of another identical phone but when i restore it, everything is restored unless the serial number. It still 0123456789ABCDEF.
How do I fix ?, Is the serial number stored anywhere else?
Thanks for the help and sorry for my english.
EDIT: I also tested the SN write tool and IMEIS work but S/N still 0123456789ABCDEF
Nothing?
hi i have thl4000 mt6582 with same problem , imei lost after every flash of custom rom, but can repair with sp flash tool, but serial writer not working.
Hello,
My phone: GSMART Roma R2 (Rooted)
I know there are a lot of threads how to restore IMEI but none of them worked when I dial up *#06#, it shows message with two lines containing "null".
I was using MIUI rom for a while and suddenly after I rebooted phone SIM was no longer recognized (before reboot I was playing with SWAP couldn't make it work so I uninstalled BusyBox (could that cause the issue?))
I already tried:
Engineering Mode: Displays "AT command is failed to send"
Terminal Emulator: Doesn't work
MAUI 3G: Flashing new IMEI changed nothing.
MTK Droid Tool - Changing IMEI did nothing.
SN Writer: Writing new IMEI changed nothing BUT when I choosed to read IMEI it successfully displayed both IMEI in the textbox. (So it looks like the IMEI actually is registered on the phone but phone doesn't seem to use it)
Manually writing MP0B_001 to NVRAM: Nothing changed.
I have used backup in CWM recovery to stock ROM, didn't work, then I did factory reset, didn't work, flashed back the stock recovery and installed update from Gigabyte site, didn't work. So basicly now my phone has stock rom, stock recovery, factory reseted and is rooted.
Thank you very much for any answers because I just fell hopeless about fixing my phone
I fixed it using solution here: http://forum.xda-developers.com/showthread.php?t=2599459
Scroll down to post with NVRAM backup, I used that backup to fix it and then just changed the IMEI numbers to my IMEI numbers.
Hi
My Lenovo Vibe X2-TO one of my sims IMEI Unknown , WIFI unknown, BT unknown and S/N 000000 .
This happen after installing new firmware I tried all ways I found on the internet but nothing is working I tried ( MTK android, Maui Meta 3G, EngineeringMode, SN&IMEI writer)
but still not working mobile get load meta mode and then failed to update please I need help for this.
Thanks
How to edit IMEI on LENOVO X2-TO
I have the same problem.
I have Lenovo X2-TO. when I wrote other framware the first sim card's IMEI was deleted and now it wrote that sim 1 IMEI is UNKNOWN.
I try all way to adit that IMEI. but can not. who know how to change and edit IMEI? I know my imei's I have original boxes where write both IMEIs
try flash nvram