amigos do android socorro
meu galaxy tab gt-p6200l nao quér ligar mais ,só fica reiniciando e nao sai disso.
isso porque cometi uma grande besteira de tentar subistituir uma pasta chamada app que se encontra dentro da pasta system,pela mesma que eu tinha copiado para o cartao de memoria,usando o root explorer.
no meio desse procedimento o tablet apagou, e agora ele so fica reincindo. será que tem jeito dele voltar a funcionar?
nao entendo nada de android.
eu sei que o meu é o 3.2
UMA LUZ POR FAVOR: Chorando: por favor alguem póde me passar um tutorial detahlado para resolver isso agradeço muito desde ja
Please use English in Forums.
By translating using Google Translator:
[DOUBT] [help] tab galaxy gt-p6200l just keeps resetting
android friends rescue
My gt-p6200l galaxy tab will not turn over, just keep restarting and not leave it.
because it made a big mistake of trying subistituir a folder called app that is inside the system folder, the same that I had copied to the memory card, using the root explorer.
Through this procedure in the tablet went out, and now he is so reincindo. will be having his way back to work?
not know anything about android.
I know mine is the 3.2
A LIGHT PLEASE: Crying: please could someone pass me a tutorial detahlado to solve this thank a lot since ja
Click to expand...
Click to collapse
From the problem, it seems you have messed up your system apps. And without no doubt maybe that's the reason for constant reboot. If you are not experienced in Android, then please don't play with root or do so. Rooting has got nothing to do for a normal user.
Anyways I'd suggest you to reflash the stock firmware of Galaxy tab. Firmwares could be found in www.sammobile.com. I guess this is the firmware you're looking for, but not sure, do more research. And instructions on flashing could be also found on that site.
~Cheers.
[APP] [XT1069] [XT1025] [XT1523] TV App for any ROM[4.4.4, 5.x.x and 6.0]
!!! Only work on !!!:
XT1069 (Moto G 2 generation), XT1025 and XT1523 (Moto E 1 and 2 Generation)...
The TV on Moto devices is really a hardware ting, if yours device didn't comes with TV this zip will not work.
If yours device comes with TV and is not listed in this thread, you can test and if works let me know, the device and ROM you tested.
Table of contents
#1 post How to install the TV app on any ROM.
2 post Changelog, old versions.
3 post HELP and some ROM's that the TV app has been successfully tested.
4 post Translation of 1 post / tradução do 1 post.
Below a print of the app running on custom ROM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to install the TV app
To install the TV app the process is very simple, Fallow the below process #1 to #5
#1 Make sure you have a rooted phone.
#2 Download the zip check the OS version4.4.4 KitKat
Motorola-TV-App-for-any-ROM-V1.0.6-KitKat.zip
5.x.x Lollipop:
Motorola-TV-App-for-any-ROM-V1.0.6-Lollipop.zip
6.0 Marshmallow:
Motorola-TV-App-for-any-ROM-V1.0.7-Marshmallow.zip
7.x Nougat and UP:
Use the Marshmallow .zip above
* Be aware on android Marshmallow and Nougat selinux may block the app from work. Selinux can be simply disable using a app my Mod version of Kernel Adiutor can do that Download the .apk open the app go to Misc and disable Toggle Se Linux if current SElinux Status is set to permissive the TV app must work, enable apply on boot to have it automatic disable after it reboot.
#3 Flash it via recovery (no need to clean dalvik cache or cache after)The zip will auto reboot after it finish the install process.
So if you will flash more then one zip leave this for last, on the queue.
#4 Only for 4.4.4 users (volume Bug)Enable in developer options Disable HW Overlays (first is need to have developer enable if you don't have and don't now how to enable developer check 3 post - help). If you don't do this and try to change the volume while watching TV the phone will force-reboot...
example:
#5 RUN jellyservice before start the TV appTo run But jellyservice is need to have init.d working Most custom ROM have it, but some times it is not working or the Kernel that you are using kill's it.
If you don't have init.d is need to start jellyservice manually, or enable init.d via app on the #3 post a help about init.d.)
Note about jellyservice :
In the stock Motorola ROM there is a file call jellyservice and it is need to be running before you run the tv app.
This zip will install this file and make it run all the time in the background, just like in the stock ROM.
But that file doesn't need to be running all the time on yours device if you don't wanna, but if you stop that service every time you need to run the TV app you will need to started the service before click to open the apk.
How to stop and start ''jellyservice''
1* with a root browser go to folder /system/etc/init.d/ and deleted the file 99jellyservice
After you reboot the jellyservice will not be running on the backgroud
2* Running jellyservice manually
2.1*- Install the app ''Script Manager - SManager''
2.2*- Open and config SManager,
check Do not ask again
click on Browser as root
click ok
go to folder:
/system/bin/
to change folder click on the folder with 2 dots on left up corner
it time you click it will go up one folder, click until only show: /
click on ''jellyservice''
check ''Su'', and ''Is executable''
click on run
closed the app
Now you can open the TV app, but every time you wanna to run it is need to do that, but you don't need to find jellyservice on system/bin folder all the time, you can just open SManager and click on the saved config, click on the arrow on the up right corner and you see jellyservice config, click on it click run and open the tv app.
Some sample images...
to run only once
to run again
click on jellyservice and click run
If the zip don't work for you go to post #3 see the Help, if that don't help let me know.
I have included on the attachments a file Cleaner.zip it will remove all the files flashed by the tv.zip, in case some one have tested it and it doesn't work and wanna to remove the files.
Developer donation link:
To donate via paypal click here
No other donation option is available.
Changelog:
V1.0.1 Initial release.
V1.0.2 Update the TV app to version 2.02.1200 / June 8, 2015.
V1.0.3 Change the "updater-script" to support more devices
V1.0.4 Made the zip complete, implemented a init.d (to run the file jellyservice)
V1.0.5 Fix a script typing error, that was preventing jellyservice to start at boot.
V1.0.6 Support KitKat, now the app is complete supports Kitkat and Lollipop and works just like in stock rom.
V1.0.7 Support Marshmallow, not fully but working in some custom ROM
Help...:
In 4.4.4 KitKat user, if a function is not enable on developer options, the TV app have a major problem that makes the app crash and the phone reboot if you change the volume wen watching tv.
To not have this problem enable:
Disable HW Overlays - PT-BR Desativar sobreposição de HW
example:
How to enable Developer:
Developer is show in setting, but it need to be enable first, to do that go to about phone and click over Build number a fill times, click until the message appears that it is enabled.
example:
I installed the zip but it doesn't work?
you need to know exactly what doesn't work...
So check if all the file of the zip are you or device after it reboot.
If no let me know exactly what you did. Your ROM, device and recovery version.
I installed the zip all good, but wen i click to open the TV app don't run? (Black screen, FC)
If you open the app and received a message "fail to initialize TV" you may using a device that don't have DTV hardware, if know you do keep reading.
If you not in KK, and have a device with DTV hardware you may have a problem to start jellyservice , check if the file system/etc/bin/99jellyservice
is present.
If not the flash not work or something deleted it. try the flash again if no luck tell me.
If yes the file is present, you may not have init.d support on yours rom check the how to enable it.
How To Enable Init.d on any ROM:
1 - you need to check if you really don't have it:
I have put in the zip a simple file that writes ( init.d works / init.d funciona) on a .txt every boot, but it will only work if init.d is fine, to check it the simple way is to delete this file and reboot after a reboot if init.d rewrites that file and its content init.d is working perfectly.
To check that go to folder system/etc/bin/ check if the file 99testinit is present.
If yes, go to /data/local/tmp/ and open the file init.d_log_test.txt
if you open the file and it content is init.d works / init.d funciona all is good, deleted the file init.d_log_test.txt reboot and check again to see if the file is there and it content( init.d works / init.d funciona), if all good let me know
If the file init.d_log_test.txt doesn't exist or is in blank you do not have init.d suport.
2 - How to install it
Is possible and simple to implemented init.d via app use the app Universal Init.d to enable it, the app is very simple and self explain.
1 - Install the App open
2 - Allow superuser permission
3 - Simply toggle OFF button to ON.
4 - Reboot.
5 - Done.
6 - check if you can open the TV app now, if not check the file /data/local/tmp/init.d_log_test.txt
example image:
If you can use init.d go to OP and look for How to stop and start ''jellyservice'' and manually started the jellyservice.
If any of this help let me know.
..............................
Confirmed that this app work in manyROM's on XT1069, XT1025 and XT1523 here some examples...
Android 4.4.4
CM11 - OP
XT1068 stock ROM running on a XT1069 - OP
Android 5.0.2
CM12 (QUANTUM-OS V3.0.2) - OP
CM12 (QUANTUM-OS V3.2.0) @rubens2009
MicroPop v 1.0.3 (Base on XT1068 stock ROM) running on a XT1069 - OP
Titan Prime @celotoledo
Android 5.1.1
AOSP-5.1.1 - OP
BlissPop v3.0 to v3.5 - OP
CM12 - OP
Android 6.0
AOSParadox 6.0 ROM **
CM13 **
With the tips of @moisespereira01 ** probaly other ROM will have the support.
**how to make this work on android M:
Check post #107 and #110. Big thanks to @moisespereira01 for his finding and test... :victory:
Android 7.x
CM14.1
OP translation to Brazilian Portuguese.
Desatualizado vou atualizar nos próximos dias...
Se tiver pressa ou não queira escrever em gringoles click aqui para o fórum e ajuda em português.
[APP] [XT1069] [XT1025] [XT1523]TV App para qualquer ROM [tested working]
Somente funciona para os modelos:
XT1069 (Moto G 2° geração), XT1025 and XT1523 (Moto E 1° and 2° geração )...
A TV no Moto G ou E é realmente algo de hardware mesmo nos modelos mais parecidos não vai funcionar somente nos XT1069, XT 1025 e XT1523
E o app só funciona em ROM custom no android L 5.x.x
Como rodar o App da TV
Não é só instalar o .zip pra rodar o app da TV
Siga todos passos abaixo na ordem descrita
É necessário que seu aparelho esteja roteado.
1° Flash/instale o arquivo Motorola-TV-App-for-any-ROM-V1.0.3.zip pela recovery customizada.
Apos o telefone iniciar por completo o app da TV estará disponível, mas não o inicie ainda!
Primeiro é necessário executar o arquivo ''jellyservice'' , este arquivo precisar estar rodando em segundo plano antes de se abrir o app da TV.
*Na ROM stock da Motorola este arquivo ''jellyservice'' esta sempre rodando em segundo plano, pois ele esta setado pra rodar apos cada inicio do sistema, assim toda vez que se clica no app da tv ele roda de 1°.
2° Executando ''jellyservice''
Neste método, é necessário configurar o processo apenas uma vez, mas no caso do modo que não fica rodando sempre em segundo plano é preciso ativar sempre antes de rodar o app da TV.
*O arquivo ''jellyservice'' estará rodando em segundo plano, da mesma maneira que fica na ROM stock, (não tem nenhum problema com isto).
abaixo os passos:
Instale este app ''Script Manager - SManager''
Abra SManager,
Marque Do not ask again
click em Browser as root
click em ok
vá na pasta:
/system/bin/
pra mudar de pasta, click na pasta com dois pontos, no topo a esquerda, ate ficar somente uma /
click em ''jellyservice''
Agora tem duas opçoes rodar sempre ou apenas uma vez.
rodar apenas uma vez:
marque ''Su'', e ''Is executable''
click em run
Encerre o app SManager
Agora já pode abrir o app da TV, porem toda vez que desligar o telefone tem de fazer isto novamente, mas não precisa encontrar o jellyservice na pasta toda vez, apenas abra o SManager e click na seta no topo direito, que ira mostrar a configuração do jellyservice salva, click sobre ela e click e run, e pode abri o app da TV novamente.
Pra rodar todo tempo.
Marque ''Su'', '' Boot'' and ''Is executable''
click em run
Encerre o app SManager.
Algumas imagens de exemplos...
Depois de reiniciar o aparelho, recebera uma notificação que o app SManager esta rodando, você pode apenas remover esta notificação
Exemplo desta notificação
Se não quer nunca mais ver esta notificação faça o seguinte.
Abra o SManager,
click nos 3 pontinhos
click em Advanced
click em configration
Desmarque Show running in background
Algumas imagens de exemplo
Dúvidas, problemas me avisa, que faço o possível pra ajudar :good:
Foi incluído no OP um arquivo pra remover todos arquivos que são instalados, caso alguem rode o app não funcione e queira remover tudo apenas rode na recovery o arquivo Cleaner.zip este vai remover tudo que esta no zip da TV.
Tags
moto g 2014 digital tv, moto g app TV para qualquer ROM, motorola digital tv app
*Todos arquivo dentro do zip foram retirados da ROM Stock Motorola para o XT1069 versão do android 5.0.2 (RETBR_XT1069_5.0.2_LXB22.46-28_cid12_CFC.xml) nenhum dos arquivos foi modificado.
Finnaly. Thanks bro. Working fine for me \o
Sent from my Moto G 2014 using XDA Free mobile app
eudigorodrigo said:
Finnaly. Thanks bro. Working fine for me \o
Sent from my Moto G 2014 using XDA Free mobile app
Click to expand...
Click to collapse
Nice. Thanks for the feedback.
Took some time, but now we have it.
Owww man! Working fine in Titan Prime. Tks for job.
Valeu muleke. É nóis!
Sent from my XT1063/64 using XDA Free mobile app
First I'll need a good custom room
Hi guys, I'm still using stock room, wich custom rom are you using with Lollipop 5.1 that runs smoth working dual chip and the battery can last a day?
Pessoal, me ajuda aí, tem alguma rom top com o 5.1? A stock tá meio lerda e detonando a bateria, bem diferente do que era no 4.4.4! Me ajudem aí!
I'm using the Titan Prime 5.0.2. Very good. Better then cyanogem based.
Eu estou usando a Titan Prime unificada 5.0.2. Muito boa. Melhor que as baseadas na cyanogem.
Sent from my XT1063/64 using XDA Free mobile app
Works 100% Thanks
@ Baybutcher27 resolved my problem with digital TV, works perfectly, thanks partner!
rafaelcantarela said:
Hi guys, I'm still using stock room, wich custom rom are you using with Lollipop 5.1 that runs smoth working dual chip and the battery can last a day?
Pessoal, me ajuda aí, tem alguma rom top com o 5.1? A stock tá meio lerda e detonando a bateria, bem diferente do que era no 4.4.4! Me ajudem aí!
Click to expand...
Click to collapse
BlissPop v3.0 android 5.1 just came out, and is the first CM12.1 bug free...
Im using with AtomKernel-r19 kernel.
Did not have the chance to test battery (flash it today) but regards to android 5.1 all is perfect.
I use this Gapps
Aqui também a stock ta meio tosca, a bateria tem noites que consome 10% isso com tudo off o celular só ali no modo despertador esperando pra me acordar.
Vou testar uns dias pra ver a bateria nesta ROM melhora e informo.
Confere estes links e testa, das android 5.1 ROM essa eu recomendo. Vlw... :good:
Gutto said:
@ Baybutcher27 resolved my problem with digital TV, works perfectly, thanks partner!
Click to expand...
Click to collapse
Nice Man, thank you.
baybutcher27 said:
Confirmed that this app work on this ROM's:
Android 5.0.2
CM12 (QUANTUM-OS V3.0.2) @op
MicroPop v 1.0.3 (Base on XT1068 stock ROM) @op
Titan Prime @celotoledo
Android 5.1
AOSP-5.1-20150321-titan-shawn5162 @op
BlissPop v3.0 @op
If someone test in other's ROM please inform.
Click to expand...
Click to collapse
Works to me at Bliss Pop Rom
Sent from my Moto G 2014 using XDA Free mobile app
---------- Post added at 07:55 PM ---------- Previous post was at 07:53 PM ----------
Agora venho dar uma ideia.
Será possível iniciar esse Kelly bean service direto quando clicar no ícone do APP? Talvez no titanium backup tenha algum modo de fazer isso mas eu não sei.
Sent from my Moto G 2014 using XDA Free mobile app
alejlle said:
Works to me at Bliss Pop Rom
Sent from my Moto G 2014 using XDA Free mobile app
---------- Post added at 07:55 PM ---------- Previous post was at 07:53 PM ----------
Agora venho dar uma ideia.
Será possível iniciar esse Kelly bean service direto quando clicar no ícone do APP? Talvez no titanium backup tenha algum modo de fazer isso mas eu não sei.
Sent from my Moto G 2014 using XDA Free mobile app
Click to expand...
Click to collapse
Dont realy know...
Não sei como este serviço funciona, mas sei que ele serve apenas para o app da TV, se fosse possível iniciar junto a motorola já teria embutido o serviço no apk, se não fizeram tem algum motivo o qual não sei...
Mas sim já pensei em criar algo pra iniciar o serviço ao clicar no app mas não sei como... :good:
baybutcher27 said:
Dont realy know...
Não sei como este serviço funciona, mas sei que ele serve apenas para o app da TV, se fosse possível iniciar junto a motorola já teria embutido o serviço no apk, se não fizeram tem algum motivo o qual não sei...
Mas sim já pensei em criar algo pra iniciar o serviço ao clicar no app mas não sei como... :good:
Click to expand...
Click to collapse
If anybody knows. Maybe is possible to modify dtv .apk and include to start jellybean service
Sent from my Moto G 2014 using XDA Free mobile app
alejlle said:
If anybody knows. Maybe is possible to modify dtv .apk and include to start jellybean service
Sent from my Moto G 2014 using XDA Free mobile app
Click to expand...
Click to collapse
The service to run need to have root access, the only way to run something like that as root on a stock rom is run it on boot after the phone boot noting have root access in the apk/service side of course, some things have but the apk cant have, otherwise if it have, open's a door to someone creating a working around and have a root access without the bootloader unlocked.
But in a custom ROM we already have everything necessary to run a app as root.
The problem is how to do it?
I'm studying it, i don't have much time, but i will try.
In the time maybe some one can help. :good:
Maybe to do a moded apk which starts jellybean service before starts mobile TV apk itself
Sent from my Moto G 2014 using XDA Free mobile app
Ajuda...
Tentei instalar o app tv for any rom xt1069. Usando o root browser eu consegui abrir a tv. Mas quando eu tento fazer o método automático eu não encontro a pasta System no app Script Manager. É por causa da rom ou o que está acontecendo? Estou com a rom CyanHacker. Desde já agradeço e espero resposta... Valeu.
Andressa Lamm said:
Tentei instalar o app tv for any rom xt1069. Usando o root browser eu consegui abrir a tv. Mas quando eu tento fazer o método automático eu não encontro a pasta System no app Script Manager. É por causa da rom ou o que está acontecendo? Estou com a rom CyanHacker. Desde já agradeço e espero resposta... Valeu.
Click to expand...
Click to collapse
Ok, try like the pics i posted click on the folder with tow dots...
Clica na pasta no topo que tem dois pontinhos mais de uma vez ate ficar somente pasta / (barra)
Igual as fotos deste post.
Ai encontra a pasta system e segue o descrito.
Vlw.
Works for me too. Quantum OS v3.2.0.
Hello everyone. I have a problem i downloaded the .zip, flash it with twrp 2.8.6 but installation didn't work the app won't show in app drawer and appears nowhere on my phone!!, i'm on quantumoOS 3.1.4 with xposed installed +few modules if that can help, i also tried downloading the ZIP from different device (computer, nexus 7)ans no difference
Sent from my Nexus 7 using XDA Free mobile app
Description:
Hi guys. I purchased a Vernee Apollo Lite cell phone a few months ago. It was with the original Rom Stock. As soon as I started testing I was disappointed. It was very hot, the battery did not last, the screen image was weird in color (it had too much brightness and colors were saturated in Miravision's default setting). In the end, I thought I had thrown money away.
I tested many ROMs, such as leanegeOS13, MadOS 7.11, MadOS 7.12, 8.12 and Remix RR. These solved some problems, mainly of the battery and heating, but they generated others.
Already very disappointed, I did a crazy thing and tested the stock rom of the Apollo X vernee on my Vernee Apollo Lite.
I know it has hardware difference (like camera and internal memory), but I still took the risk.
The result is that the cell phone is working right. All the problems reported are gone. There is already a month and everything is ok.
Procedure:
Who cares, do it at your own risk. My suggestion is to do a data backup and system. Also have noted the numbers of IMEIs.
I installed it through SP_Flash_Tool. I used the ROM Apollo-X-NEW_20170328.rar. ( needrom / download / apollo-x-2017-03-28.rar )
I lost the IMEI, which is easily restored with code * # 6813 #. Enter code and insert your IMEIs.
As I do not like the original Laucher, I installed Evie Laucher. This is free as well as manage notifications. Well customizable.
Like the original Apollo Lite rom, the Apollo X stock rom also does not separate the touch and notification volume. To solve this, I used an application called Volume Butler.
Texto original
Descrição:
Olá galera. Adquiri um celular Vernee Apollo Lite a alguns meses. Estava com a Rom Stock original. Assim que comecei a testar fiquei decepcionado. Ele esquentava muito, bateria não durava, imagem da tela com as cores estranhas (tinha excesso de brilho e cores ficavam saturadas na configuração padrão da Miravision). Em fim, achei que tinha jogado dinheiro fora.
Testei muitas ROMs, como leanegeOS13, MadOS 7.11, MadOS 7.12, 8.12 e Remix RR. Essas resolviam alguns problemas, principalmente da bateria e aquecimento, mas geravam outros.
Já muito decepcionado, fiz uma loucura e testei a rom stock do vernee Apollo X no meu Vernee Apollo Lite.
Sei que tem diferença de hardware (como câmera e memória interna), ainda sim arrisquei.
O resultado é que o celular está funcionando direito. Todos os problemas relatados sumiram. Já tem um mês e tudo está ok.
Procedimento:
Quem se interessar, faça por sua conta e risco. Minha sugestão é fazer um backup de dados e sistema. Também tenha anotado os números de IMEIs.
Fiz a instalação pelo SP_Flash_Tool. Utilizei a ROM Apollo-X-NEW_20170328.rar. ( needrom / download / apollo-x-2017-03-28.rar )
Perdi o IMEI, que é facilmente restaurado com código *#6813#. Digita código e insere seus IMEIs.
Como não gosto o Laucher original, instalei o Evie Laucher. Esse é gratuito, além de gerenciar notificações. Bem personalizável.
Assim como a rom original do Apollo Lite, a rom stock do Apollo X também não separa o volume do toque e da notificação. Para resolver isso, utilizei um aplicativo chamado Volume Butler.
Olá, venho pedir e perguntar se tem como instalar a atualização do game turbo que saiu para o mi9 no dia 6/7 de agosto.
Meu aparelho é um xiaomi mi8 e utilizo a miui.eu.
O game turbo trouxe a função de alterar a voz do usuário, porém essa função só foi liberada no mi9.
----------
MOD EDIT: English Translation Below
Hello, I come to ask and ask if you can install the update of the turbo game that came out for mi9 on 6/7 August.
My device is a xiaomi mi8 and I use miui.eu.
The turbo game brought the function of changing the user's voice, however this function was only released in mi9.
Tiago Lapa said:
Olá, venho pedir e perguntar se tem como instalar a atualização do game turbo que saiu para o mi9 no dia 6/7 de agosto.
Meu aparelho é um xiaomi mi8 e utilizo a miui.eu.
O game turbo trouxe a função de alterar a voz do usuário, porém essa função só foi liberada no mi9.
Click to expand...
Click to collapse
Hi, I see that you're new here. Welcome to XDA! Please note that XDA is an international forum, and as per the Forum Rules, only English is permitted to be used throughout the website. As a courtesy, I've edited your original post and added the English translation. Going forward, please use English only. You can read the Forum Rules by clicking here.
Regards,
shadowstep
Forum Moderator
----------
Oi, vejo que você é novo aqui. Bem-vindo ao XDA! Observe que o XDA é um fórum internacional e, de acordo com as Regras do Fórum, apenas o inglês pode ser usado em todo o site. Como cortesia, editei sua postagem original e adicionei a tradução em inglês. No futuro, use apenas inglês. Você pode ler as Regras do Fórum clicando aqui.
Saudações,
shadowstep
Moderador do fórum
Tiago Lapa said:
Olá, venho pedir e perguntar se tem como instalar a atualização do game turbo que saiu para o mi9 no dia 6/7 de agosto.
Meu aparelho é um xiaomi mi8 e utilizo a miui.eu.
O game turbo trouxe a função de alterar a voz do usuário, porém essa função só foi liberada no mi9.
----------
MOD EDIT: English Translation Below
Hello, I come to ask and ask if you can install the update of the turbo game that came out for mi9 on 6/7 August.
My device is a xiaomi mi8 and I use miui.eu.
The turbo game brought the function of changing the user's voice, however this function was only released in mi9.
Click to expand...
Click to collapse
If I remember correctly, all eu dev rom has turbo game with the function of changing user voice
Game turbo apk