Hi guys I bricked my m8s + while upgrading to lollypop. It came with 4.4
So I have blue light at front but the box doesnt respond to usb via usb burning tool and sd card method. There is also no display via HDMi or avi ports.
What options do I have ?
I have tried tooth pick method for sd and for usb.
No response at all .
I am posting puctures of inside of box
Please help all devs
Thank you
Related
Hi everyone,
I have an HTC one (ATT) that has CM10.1.3 installed with CWM Recover 6.0.3.1. The phone seems to work fine and I've been using it like this for a little over a week. Today my USB OTG cable came and I wanted to use it to transfer a few files off the phone to a USB stick and then on to another computer where I have not yet installed the HTC drivers. But the phone did not detect any drive. I looked at a few USB host helper apps and tried them out but they didn't help.
Searching through these forums for CM10.1 I saw 2 or 3 people say USB OTG doesn't work for that version, but is there a version of CM that does have USB OTG working for an HTC One?
I'm also not sure if perhaps my cable may be faulty. I rebooted into recovery with the cable and a USB stick installed and in recovery the USB stick's light did light up for a few seconds. But when attempting to mount as an external SD card it just gave an error. Funny enough when I tried to format the ext SD card, I was able to do so (I had put a GB of junk files on it before). After the drive was formatted I tried to mount it, but again I received an error. The drive is formatted as FAT32. So even if USB OTG doesn't work in CM10.1.3 shouldn't it have worked in recovery? I've googled some Youtube videos and saw a few people backing up their HTC Ones in recovery with a USB OTG cable and usb stick. Yet, I couldn't do that and of the 4 USB sticks I have handy (ranging from 256 MB to 32 GB) only the 4 GB Patriot XT stick lights up at all when connected in recovery. There is no blinking what so ever with the phone booted into CM.
If someone is using a HTC One and able to connect in recovery (or in CM), I would like to know. I'd be willing to buy a few other USB OTG cables in case mine (T&S Electronics version from Amazon) is faulty.
Thanks for any help.
TZL
10.2 just got USB OTG working. Has worked in TWRP for quite some time. Mine is a $2 cable from Amazon.
cschmitt said:
10.2 just got USB OTG working. Has worked in TWRP for quite some time. Mind is a $2 cable from Amazon.
Click to expand...
Click to collapse
Thanks for the reply. I'll try 10.2 next week and see if it works. Do you recommend TWRP recovery over CWM?
TZL.
tzl99 said:
Thanks for the reply. I'll try 10.2 next week and see if it works. Do you recommend TWRP recovery over CWM?
TZL.
Click to expand...
Click to collapse
Yes
Sent from my HTC One using Tapatalk 4
It was the cable
Just an update: I tried a different Cyanogenmod version and even a stock ROM and still had trouble. It was the cable. I bought 3 more USB OTG cables and now attaching a USB stick works well with all my USB sticks in both recovery and with running the phone normally. Thanks for the help.
TZL
P.S. Though I know it was a random event, the first cable from Amazon that didn't work was T&S electronics. The 3 subsequent cables were QQ Tech, Jkase and Sanoxy. All 3 worked fine with a range of USB sticks from 256 MB to 32GB (USB 2 & USB 3 sticks). Thanks.
Hello all,
first of all, tried to use search of this problem, couldn't find anything.
So my problem is that when I connect to my GT-I9100 OTG cable with flash drive(8gb) it just dosen't detect it also tried using philz, apollo(dosen't remember corectly name) dosen't work either. Tried using OTG Troubleshooter it is question mark on "OTG Detected", with OTG cable everything is good because asked my friends to use it, they said that it worked for them. I thought it was my phone usb(where you put in) was damaged but no, phone is charging perfect also USB to PC works correctly. Also OTG cable holding very weak.
My rom:Neat rom(newest)
Kernel: Dorimanx(newest)
Thanks for help
Merry Christmas and happy new year
Regards, Paul.
Hi I try to connect my usb mouse to my Xperia but I noticed that my cellphone not recognize my mouse so I tried another devices like card reader or pendrives and the cellphone do nothing. So theres someting that I have to do to make OTG working? I'm on the lastest official mm (note I never try OTG before, in lenovo K5 my OTG cable works)
tonyt. said:
Hi I try to connect my usb mouse to my Xperia but I noticed that my cellphone not recognize my mouse so I tried another devices like card reader or pendrives and the cellphone do nothing. So theres someting that I have to do to make OTG working? I'm on the lastest official mm (note I never try OTG before, in lenovo K5 my OTG cable works)
Click to expand...
Click to collapse
Q1:
Have you tried connecting your device to the computer via a USB cable? Can the computer recognize it?
If no, maybe there is problem with your USB port.
If yes, proceed to the next question.
Q2:
Have you tried changing the connectivity state for the USB port in Settings?
If not, try it out now.
If yes, report back and we'll discuss further more.
Use Es File Explorer... That's what I've been using
Sorry for late reply, I got it working, I replaced the usb cable, I think that the quality of the cable was too bad
hey all
I have an Amazon android box with Rockchip 3328 (box model is HK1max). It's bricked and the seller sent me the RK burn tool and 2 different firmware versions (they weren't able to confirm which would work so said to just try both). Problem is the RK burn tool is in chinese, and the instruction doc is so broken english I can barely follow it. I havent used a burn tool since Odin on my S3 10? years ago
Right off the top, the chinese language burn tool doesn't recognize the box when plugged into my laptop via USB-a to USB-a cable. I downloaded and installed a driver and now my computer makes the connection prompt when it is plugged in, but nothing changes on the burn tool to indicate it detects the box. There is a reset on the box inside the audio aux port, i tried holding down the reset button, then plugging the USB cable in hoping it would get me into recovery, but still nothing.
Can anyone please provide me a tool in english and a dummy proof firmware installation instructions. Thanks.
Like I said, i have two firmware versions to try that were provided by the seller, I just need the first 90% of the problem lol
Use a USB burning tool (any one). The hidden button is in the AV port. Use a toothpick for it.
Any update on the issue mooseknuckles1?
Because i have the exackt same problem. Windows sound is on when i connect it. But nothing else and no driver is running from rockchip in device manager... only the same red LED on the device and nothing else...
Hello friends, I need help please, my tv box t95q which is one of the new ones in quotes, I installed several firmware to paret of yours that only failed me in wifi and I like them a lot and it turns out that I installed one of tanix x3 and between with the pc and the amlogic application and now the pc does not recognize me, the tv box or the system of installing via sd card does not turn on the blue light anymore and it does not give or image I have seen that there is a method making a small short with the tv Box disassembled but I saw it and it was another tv box and I don't know where I should do it in mine if you know something and can help me please I appreciate it very much
Ho, you would need to use mask rom mode, this will force your box to be detected in USB burntool, this is achieved by shorting 2 pins on the nand flash usally