Related
I want to unlock my new Verizon Motorola Razr Maxx - not to use it on some other network (it is CDMA so that is a nonstarter) but so I can get root access in order to install Superuser and other such software. I also want to be able to still update the phone with ice cream sandwich when it is finally released and I will need to re-lock the phone accordingly.
I have searched everywhere but all of the blogs and posts talk about how you cannot run a CDMA phone on a GSM network (shocking) and that is not why I want to unlock the phone.
Is it possible to unlock the Razr Maxx?
Unlocking and re-locking the carrier is different from what you want here. What you want is called 'Rooting'. That'll allow you to get the Superuser app and install other root related software.
After rooting you will be able to make system modifications and stuff. If you ever get an update which fails to install due to root just go back to a original fastboot image and try the update again. It will work for sure.
Look here for rooting: http://forum.xda-developers.com/showthread.php?t=1342567
You rock! Thank you for both correcting me query and for providing the solution!
How About Maxx?
Sorry but the page you referenced is for the older Razr - will this work on the Razr Maxx?
Same phone just the Maxx has a bigger battery. Uses the same software. Any post that pertains to the CDMA Razr works for the CDMA Maxx.
Aashrey99 said:
Unlocking and re-locking the carrier is different from what you want here. What you want is called 'Rooting'. That'll allow you to get the Superuser app and install other root related software.
After rooting you will be able to make system modifications and stuff. If you ever get an update which fails to install due to root just go back to a original fastboot image and try the update again. It will work for sure.
Look here for rooting: http://forum.xda-developers.com/showthread.php?t=1342567
Click to expand...
Click to collapse
but what if, I'm from another country, and I want to use the MAXX(unlocked) on another country?
-If I change the rom, will it still be locked?
-if I change the kernel, still be locked?
-if I change the modem, still locked?
Thanks ;')
mawaisz said:
but what if, I'm from another country, and I want to use the MAXX(unlocked) on another country?
-If I change the rom, will it still be locked?
-if I change the kernel, still be locked?
-if I change the modem, still locked?
Thanks ;')
Click to expand...
Click to collapse
-If I change the rom, will it still be locked?
Rooting is just giving you "administrator" privlages on your phone. From there you can do a lot to it. Changing ROMs will keep your root access as long as its not the stock ROM. And if your using the stock ROM with Root, i'd advise using VooDoo's OTA Root Keeper.
-if I change the kernel, still be locked?
Unfortunately, the Kernel is locked out due to the boot-loader being locked down by Motorola and thus far cannot be fully unlocked (and functional). So no kernel changes (yet). But a custom Kernel will not affect Root access.
-if I change the modem, still locked?
(Not sure what your asking)
IF you're going to another country, you'd just need to make sure your phone is the RAZR GSM Model (international). The CDMA Model will most likely not function well in other countries because it uses a different radio technology.
aety9 said:
-If I change the rom, will it still be locked?
Rooting is just giving you "administrator" privlages on your phone. From there you can do a lot to it. Changing ROMs will keep your root access as long as its not the stock ROM. And if your using the stock ROM with Root, i'd advise using VooDoo's OTA Root Keeper.
-if I change the kernel, still be locked?
Unfortunately, the Kernel is locked out due to the boot-loader being locked down by Motorola and thus far cannot be fully unlocked (and functional). So no kernel changes (yet). But a custom Kernel will not affect Root access.
-if I change the modem, still locked?
(Not sure what your asking)
IF you're going to another country, you'd just need to make sure your phone is the RAZR GSM Model (international). The CDMA Model will most likely not function well in other countries because it uses a different radio technology.
Click to expand...
Click to collapse
What I ment the modem was Radio like the one in At&t Captivate.
So what you mean here is, there's no way for me to UNLOCK the phone(If the phone is 1.GSM 2.Lock to verizon), if I want to use another carrier in Razr Maxx?
For example:
I want to buy Razr Maxx and use it in any country, so its either must be:
1. GSM
2. International (Unlock)
3. If its lock (How do I do it? If method changing Roms/Kernels/Radio's does not work)
Thanks :')
i have a droid razr xt912 that is locked to verizon network and in my country i have the gsm freq(i saw that he has gsm and cdma,but the gsm chip is locked) that he has in the specs 900/1800 for 2g and 2100 for 3g , i can unlock it? and actually work in my country? or i have to wait for the ics update to unlock the gsm chip and then unlock it full?
and one more question if there is someone kind to tell me how can i unlock it? i read a few ways but i'm not sure what option is good or bad , i think in the first time i root it then apply a custom recovery then i don't know....
Unlocking Razr maxx CDMA
I recently bought the droid razr maxx before I moved to Korea. When I bought it, I was told by a Verizon clerk that the phone could be unlocked for use on Korean networks when I arrived in Korea. However, I found out that none of the Korean companies know how to unlock it. Both Verizon and Korea use CDMA networks as does the Droid Razr, so I was hoping there was a way I could switch from Verizon to a Korean network. Are there some values that I need to change in the programming section of my phone? (##program). Should I wait for the ICS update to (finally) come? Any help is greatly appreciated! :fingers-crossed:
numbuhwun said:
I recently bought the droid razr maxx before I moved to Korea. When I bought it, I was told by a Verizon clerk that the phone could be unlocked for use on Korean networks when I arrived in Korea. However, I found out that none of the Korean companies know how to unlock it. Both Verizon and Korea use CDMA networks as does the Droid Razr, so I was hoping there was a way I could switch from Verizon to a Korean network. Are there some values that I need to change in the programming section of my phone? (##program). Should I wait for the ICS update to (finally) come? Any help is greatly appreciated! :fingers-crossed:
Click to expand...
Click to collapse
I'm wondering the exactly same issue, but I got the ICS update so I was told about the Global Ready and stuff, but its not working.
RAZR comm chipset
MDM6600: WCDMA 850/900/1900/2100
LTE: 700
http://www.anandtech.com/show/5198/motorola-droid-razr-review-a-better-clad-bionic/6
verizon: CDMA 800/1900 3G
http://en.m.wikipedia.org/wiki/Cellular_frequencies#section_3
or
verizon: CDMA2000 850/1900
http://en.m.wikipedia.org/wiki/Mobile_Network_Code#section_1
NOT SURE WHICH ONE IS CORRECT - RESEARCHED FURTHER - looks like Verizon uses CDMA2000, and I'm pretty sure that 800 is the same as 850 (I'm not sure why but they seem to be interchangeable)
South Korea: CDMA2000 800/1700 UMTS 2100
http://en.m.wikipedia.org/wiki/Mobile_Network_Code#section_1
Looks like GSM freqs work too.
The Motorolla Photon uses the same MDM6600 - you may be able to find more info on it by searching for Photon.
http://forum.xda-developers.com/showthread.php?t=1208346
https://forums.motorola.com/posts/24e965bc07
I found some instructions, for using the phone overseas...
http://www.androidupdate.co/use-my-android-phone-overseas/
Let me know if it works.
Verizon international coverage:
http://businessportals.verizonwireless.com/international/traveling_to/index.html
Greetings,
Ive lurked on xda for years without ever posting. All problems are solvable with a little research and the help of our mutual friend google
Im on my 4th HTC device, now a OneX+ that was brought into Dubai from Taiwan. Having successfully rooted and rommed all my phones and tablets, I kinda jumped the gun and started mucking around with my phone a bit early, using the rootboot early on.
I attained SU properly, but I had the same problems as others that in HBOOT, the radio was "unknown". Unfortunately I didnt write down the original radio settings, so im not entirely sure what my device is.
Now with the latest CWM, I have a working radio, CWM and AndroRevolution 3.0 working brilliantly. Radio is being reported again as the EU version of .16
However what I wanted to know are the following questions:
1) Just a bit of confirmation; the boot.img dictates the radio, correct?
2) If yes, then is it possible to flash a different radio than the original? If no, then does this mean since my radio is confirmed and everything is working, my current radio _IS_ the correct one?
3) My region and provider has LTE support and my provider says I only need to enable it on my phone. However using the dialcode to access test settings and change through the modes, it keeps switching from any LTE reception back to something with WCDMA. I cannot even switch to GSM/WCDMA/LTE auto. It switches back within 2 seconds.
So what Im trying to ascertain here is, do I possibly have the wrong radio, and if I do is there a way to figure out what it should have been?
The other piece of the puzzle is that despite the unit is from Taiwain, the original language when i switched it on was German, which would suggest it is in fact a EU unit.....
Ive searched through many tools, apps, threads, specs, with no luck in answering the question.... Any help is greatly appreciated.
Paz
1. Boot.img is the kernel and has nothing to do with the radio
2. You can only flash different radio versions by either flashing an RUU or by S-OFF. Radio is a security protected partition. FLASHING A RADIO WILL NOT ENABLE 4G ON A NON 4G DEVICE!! The HOX+ Inrernational version is 3G only. So in answer to your question. Yes you can flash a new radio, but no you will never have 4G on an international hox+
AndroHero said:
1. Boot.img is the kernel and has nothing to do with the radio
2. You can only flash different radio versions by either flashing an RUU or by S-OFF. Radio is a security protected partition. FLASHING A RADIO WILL NOT ENABLE 4G ON A NON 4G DEVICE!! The HOX+ Inrernational version is 3G only. So in answer to your question. Yes you can flash a new radio, but no you will never have 4G on an international hox+
Click to expand...
Click to collapse
I do have S-OFF though, so is there a way to confirm if its the international version? The model is PM35110. Any reference online is always in Asian language, so hard to tell. I suppose international version really means all countries.
Bugger.... I bought this specifically for LTE support... :crying:
Paz75 said:
I do have S-OFF though, so is there a way to confirm if its the international version? The model is PM35110. Any reference online is always in Asian language, so hard to tell. I suppose international version really means all countries.
Bugger.... I bought this specifically for LTE support... :crying:
Click to expand...
Click to collapse
How did you get S-OFF? Do you mean an unlocked bootloader? because that's a different thing. Nand protection security flag, remains intact when unlocking bootloader. so write protected partitions like radio remain unaffected. Either way it's not a software issue. Its a hardware issue. The LTE device have different radio hardware not just software, So your device is either LTE ready or not.
AndroHero said:
How did you get S-OFF? Do you mean an unlocked bootloader? because that's a different thing. Nand protection security flag, remains intact when unlocking bootloader. so write protected partitions like radio remain unaffected. Either way it's not a software issue. Its a hardware issue. The LTE device have different radio hardware not just software, So your device is either LTE ready or not.
Click to expand...
Click to collapse
Er yes, you are not confused, i am. HBOOT is showing S-ON, so I must have been high on caffeine when I was sure I saw S-OFF at one point. However like I mentioned I was playing with the rootboot boot.imgs early on and I was pretty sure I saw S-OFF then. But incidentally that was also when the radio was "unknown" at that time.
Oh well, Im stateside for Xmas and will give my dad the international version and buy myself a new one.
Thanks for your help
p.
Paz75 said:
I do have S-OFF though, so is there a way to confirm if its the international version? The model is PM35110. Any reference online is always in Asian language, so hard to tell. I suppose international version really means all countries.
Bugger.... I bought this specifically for LTE support... :crying:
Click to expand...
Click to collapse
You're doing it so, so wrong.
A quick search of the model number reveals that it's the Endeavour C2. If you have an LTE version it would be Evitareul.
1) Wrong. Radios are flashed separately and are not packed into the boot.img.
2) It is possible but unless you are S-OFF you cannot flash one very easily.
3) The reason why is because your device does not support LTE.
Hunt3r.j2 said:
You're doing it so, so wrong.
A quick search of the model number reveals that it's the Endeavour C2. If you have an LTE version it would be Evitareul.
1) Wrong. Radios are flashed separately and are not packed into the boot.img.
2) It is possible but unless you are S-OFF you cannot flash one very easily.
3) The reason why is because your device does not support LTE.
Click to expand...
Click to collapse
Yes thanks
Radios are not .img files to be flashed, they're in /system/etc
Hello everybody,
My Rogers Lumia 920 (unlocked and pentaband beforehand) was bricked mysteriously overnight and I came across the instructions to unbrick the phone. In my NaviFirm search, I noticed that the Rogers ROMs (releases 1232.2109.1242.1002 i believe) for the RM-820 have disappeared as there are many screenshots of them which were posted a few weeks ago. As a last resort, I flashed the AT&T ROM onto my 920 and I have lost the ability to use my phone on Wind mobile and all other AWS networks. Does anybody by chance have an already downloaded Rogers ROM they could share with me? Are there any other roms for the 920 that don't have the AWS bands disabled?
Thanks in advanced!
TheElse said:
Hello everybody,
My Rogers Lumia 920 (unlocked and pentaband beforehand) was bricked mysteriously overnight and I came across the instructions to unbrick the phone. In my NaviFirm search, I noticed that the Rogers ROMs (releases 1232.2109.1242.1002 i believe) for the RM-820 have disappeared as there are many screenshots of them which were posted a few weeks ago. As a last resort, I flashed the AT&T ROM onto my 920 and I have lost the ability to use my phone on Wind mobile and all other AWS networks. Does anybody by chance have an already downloaded Rogers ROM they could share with me? Are there any other roms for the 920 that don't have the AWS bands disabled?
Thanks in advanced!
Click to expand...
Click to collapse
I just posted links to the Rogers firmware at http://forum.xda-developers.com/showpost.php?p=36686433&postcount=8 .
However, I hate to be the bearer of bad news, but there are reports of the AT&T firmware fully disabling the AWS bands, even if you re-flash the Rogers ROM afterwards. Maybe the posts I've seen are wrong, so by all means give it a try and please let us know the result. :fingers-crossed:
Good Luck!
Wow, thank you so much!!! I'll try it and let you know how it goes.
You have just made my week
Edit: Yeah, the band is still disabled on the Rogers ROM. CURSE YOU AT&T!
Does anybody know how to do a total clearing and re installation of the Rogers ROM then? A bit of a stretch, but hoping this phone won't have to meet Craigslist or something, I love everything about it minus the fact it doesn't work on my network.
Thanks again!
TheElse said:
Wow, thank you so much!!! I'll try it and let you know how it goes.
You have just made my week
Edit: Yeah, the band is still disabled on the Rogers ROM. CURSE YOU AT&T!
Does anybody know how to do a total clearing and re installation of the Rogers ROM then? A bit of a stretch, but hoping this phone won't have to meet Craigslist or something, I love everything about it minus the fact it doesn't work on my network.
Thanks again!
Click to expand...
Click to collapse
After reflashing the rogers rom did you do a factory reset? I really doubt that flashing an at&t rom permanently disables the aws band even after the original rogers rom has been flashed again. That would mean the at&t rom changes a very secure low level area of the phone and it just doesn't seem that likely or anything I've heard of happening before...
TheElse said:
Wow, thank you so much!!! I'll try it and let you know how it goes.
You have just made my week
Edit: Yeah, the band is still disabled on the Rogers ROM. CURSE YOU AT&T!
Does anybody know how to do a total clearing and re installation of the Rogers ROM then? A bit of a stretch, but hoping this phone won't have to meet Craigslist or something, I love everything about it minus the fact it doesn't work on my network.
Thanks again!
Click to expand...
Click to collapse
yea man , same here had a bricked developer phone which I flashed with ATT Rom and now flashed it to Rogers Rom. I am still stuck with Edge on Tmobile :crying:. If only there is a method for a clean installation !
patrick92260 said:
After reflashing the rogers rom did you do a factory reset? I really doubt that flashing an at&t rom permanently disables the aws band even after the original rogers rom has been flashed again. That would mean the at&t rom changes a very secure low level area of the phone and it just doesn't seem that likely or anything I've heard of happening before...
Click to expand...
Click to collapse
By factory reset, do you mean going into about and reset my phone? If so, yep, I tried it and it didn't help recover the aws band. Is there any way to access the system root of the phone, or am I dreaming at this point? Thanks!
TheElse said:
By factory reset, do you mean going into about and reset my phone? If so, yep, I tried it and it didn't help recover the aws band. Is there any way to access the system root of the phone, or am I dreaming at this point? Thanks!
Click to expand...
Click to collapse
Yeah that's what I meant for a reset. The only other way I can even think of getting the AWS back is possibly finding a dialer code that would let you select radio bands. I want to figure this out too b/c I have a sim unlocked at&t lumia that I want to flash the rogers rom to so I can get the AWS band.
patrick92260 said:
Yeah that's what I meant for a reset. The only other way I can even think of getting the AWS back is possibly finding a dialer code that would let you select radio bands. I want to figure this out too b/c I have a sim unlocked at&t lumia that I want to flash the rogers rom to so I can get the AWS band.
Click to expand...
Click to collapse
##3282# (Or ##3282 call) will present you with a thing that lets you change the bands used for 3g and lte, but it doesn't have the aws band (band IV) for selection under 3g D:
TheElse said:
##3282# (Or ##3282 call) will present you with a thing that lets you change the bands used for 3g and lte, but it doesn't have the aws band (band IV) for selection under 3g D:
Click to expand...
Click to collapse
I really have no idea then... But I'm 99% sure after flashing dozens of phones from different companies that the AWS band is not permanently disabled. We just need to find a way to get it back on. Problem is it's probably going to take someone with more technical skills about windows phone 8 (probably searching thru the root directory) to re-enable it.
someone would need to post the baseband of the rogers model and then you can flash the baseband and get your aws band back.
I read somewhere that all the lumias 920 are the same on hardware side, that they only have different softwares and firmware on the inside; rumor has it that if you could get the firmware and baseband that nokia flashes into the dev phones, you could convert any lumia 920 into a dev phone with anything unlocked.
ellokomen said:
someone would need to post the baseband of the rogers model and then you can flash the baseband and get your aws band back.
I read somewhere that all the lumias 920 are the same on hardware side, that they only have different softwares and firmware on the inside; rumor has it that if you could get the firmware and baseband that nokia flashes into the dev phones, you could convert any lumia 920 into a dev phone with anything unlocked.
Click to expand...
Click to collapse
If flashing the att rom to a rogers phone installs the att baseband (which disables AWS) then reflashing the original rogers rom would overwrite the att baseband with the original rogers baseband (should re-enable AWS) so I don't think that is the issue.
patrick92260 said:
If flashing the att rom to a rogers phone installs the att baseband (which disables AWS) then reflashing the original rogers rom would overwrite the att baseband with the original rogers baseband (should re-enable AWS) so I don't think that is the issue.
Click to expand...
Click to collapse
The AT&T baseband seems to stick though, maybe the AT&T rom has another file that has no equivalent in the rogers ROM that's sole purpose it to lock out the AWS band. Hopefully we can get this fixed soon, I'd love to love the Lumia 920, but at this rate, my eyes are starting to turn to the 8x.
patrick92260 said:
If flashing the att rom to a rogers phone installs the att baseband (which disables AWS) then reflashing the original rogers rom would overwrite the att baseband with the original rogers baseband (should re-enable AWS) so I don't think that is the issue.
Click to expand...
Click to collapse
I don't think the rogers firmware includes the rogers baseband, as the baseband is the one that controls the radios and frequencies of the handset.
One can install a firmware without a baseband and viceversa
ellokomen said:
I don't think the rogers firmware includes the rogers baseband, as the baseband is the one that controls the radios and frequencies of the handset.
One can install a firmware without a baseband and viceversa
Click to expand...
Click to collapse
Hmm, I guess we're basically just hunting for the Rogers baseband then. If only there was a way to browse the system root of a windows phone device D:
TheElse said:
Hmm, I guess we're basically just hunting for the Rogers baseband then. If only there was a way to browse the system root of a windows phone device D:
Click to expand...
Click to collapse
The baseband for my stock at&t 920 with the portico ota is 1.0.202075.3. Someone who has a stock rogers 920 that didn't flash the att rom what is your baseband version? (about - more info) Then we need to compare and see what the baseband is on a rogers phone that has lost the AWS band.
patrick92260 said:
The baseband for my stock at&t 920 with the portico ota is 1.0.202075.3. Someone who has a stock rogers 920 that didn't flash the att rom what is your baseband version? (about - more info) Then we need to compare and see what the baseband is on a rogers phone that has lost the AWS band.
Click to expand...
Click to collapse
I just updated my phone to portico and it seems that I've got the same baseband as you. Can anybody with a stock Rogers ROM post their baseband? After updating, my phone popped up with a new message when I put in my wind sim. It said "Phone mode changes. Your phone is now in GSM mode." I have no idea if you can change modes or anything like that.
Hey guys, I just wanted to jump in here and say that I'm having the same issues. I have a BUILD Dev phone that was bricked -> flashed AT&T -> flashed Rogers and the AWS band is disabled / vanished.
I've contacted Nokia Experts and was told the only option at the moment was to get me a new phone... and I've been waiting for months, lol. I'm thinking that they're going to send me a standard unlocked L920 without AWS bands but that's a bridge I'll cross when or if I get there... I was also told that the repair center did not have the ability to fix this problem and when I asked for the original firmware I was told they (Nokia Experts) did not have it.
Someone HAS to know what's going on here and how to fix it!
If anyone finds a way to get the AWS band back I'm willing to PayPal them $100. Maybe those with more skill will help if we offer financial incentive?
I'm in the US on T-Mobile for reference.
What we need to figure out first is what the baseband is on a stock rogers 920 that has never had the att firmware flashed on it. If it is different then it looks like you'll have to wait this out until nokia comes out with new firmware that has an upgraded baseband and hopefully that brings back the AWS
What about the base band from a Dev device like mine? If the Rogers would work as a reference point then I'd imagine the Dev base band would work too.
There are several users here with them. I can't provide mine because It's been flashed as I mentioned, but I'm currently running 1.0.202075.3 as well as others in this thread.
Onyx Z32 said:
What about the base band from a Dev device like mine? If the Rogers would work as a reference point then I'd imagine the Dev base band would work too.
There are several users here with them. I can't provide mine because It's been flashed as I mentioned, but I'm currently running 1.0.202075.3 as well as others in this thread.
Click to expand...
Click to collapse
Is there a way to port TouchXPlorer to WP8? I think it has access to the system directory on WP7 but I've never actually used it before. That might help us extract the correct baseband.
Hi,
i own a HTC One S (16GB) device, am running a custom rom (MaximusHD 10.0.1), Android 4.2.2, Htc Sense 5.0, rooted, TWRP 2.7 recovery, HBoot 2.16, Radio 1.20.50.05.16, Carrier is Tmobile, supercid 11111111 and bootloader unlocked. i recently installed maximusHD 10.0.0 everything works fine expect for the network connectivity, i can only make use of 2G (edge) signal but i can't switch to 3G only. Whenever i switch to 3G only my networks goes off but when i switch back to 2G it works perfectly please i would be glad if you guys can help me out
You have the official Tmo version or an international version of the phone? That rom is for the international version and might not be set up to properly utlilize the bands of Tmo service 100 is the first thing that comes to mind.
Confirmed: International version of One S does not utlilize any of the bands for T-Mobile past 2G / Edge.
From HTC's website:
HSPA/WCDMA:2
Europe/Asia: 850/900/2100 MHz
GSM/GPRS/EDGE:
850/900/1800/1900 MHz
T-Mobile HSPA/WCDMA uses a combo of the 1900 Mhz frequency and a combo 1700/2100 AWS band.
I don't know if I get you correctly but if this is what you mean my device displays either GSM OR WCDMA so that mean I have the official tmobile version
I'm confused...you don't know if your phone came from T-Mobile or not?
My HTC one s is from T-Mobile, pls can help with the situation would really appreciate it
Ok. When you installed the rom, did you also install another radio or firmware package as well? As in the one that was listed in the OP of the rom here: http://forum.xda-developers.com/showthread.php?t=2445392 ? If so, that is probably why. The rom and radio are for the international version of your phone, not the one from T-Mobile. Now, obviously the phone are so similar that the software works on both versions. The only difference is the data bands that are supported for 3g/4g and the radios that interface with those bands. So, if you have never changed your radio like it was suggested in the thread for that rom - change your rom to one based off of T-Mobile software. If you have changed the radio, then flash one for the T-mobile version, and you should be fine. If it doesn't work after that, you'll just want to make sure both the rom and radio are for the T-Mobile version.
Thanks man, I think I messed up my device and a newbies to this time installation things. I actually followed the instructions given in the maximushd Rom, I flash the firmware packages with my tmobile version device. Pls what can I do to fix this I need your help
Gbetoyan said:
Thanks man, I think I messed up my device and a newbies to this time installation things. I actually followed the instructions given in the maximushd Rom, I flash the firmware packages with my tmobile version device. Pls what can I do to fix this I need your help
Click to expand...
Click to collapse
Are you S-Off?
If so: http://d-h.st/7V7 - It's a large file with the Aroma Installer to let you pick which radio you want. I believe you'd be looking for the T-Mous 1.13 one. If you aren't S-Off - Don't bother with that.
S-On?
If so, you need to re-lock the bootloader and run the RUU (Rom Update Utility) to get everything back on track, then you can re-unlock the bootloader and redo the recovery and rom stuff. http://www.androidruu.com/getdownlo..._10.30.50.08L_release_309489_signed_ICS_2.exe
Guide: http://androidforums.com/one-s-all-...e-how-run-ruu-your-htc-one-s.html#post5568357
Thanks man i really appreciate your effort and time you have render to me, i will work on the instructions you have given to me and let you aware how things turned out
During the installation of Sense-Radio-Installer-v6.zip i came across where it asking to select either US BUILD.PROPS OR NO EDIT please what does that mean
Hi to all!
This is my first post here.
Couple days ago i purchased LG v10 (F600L) with 64GB of ROM! This is korean model from network U+.
I live in Croatia so I can't use some features from phone, and it's not the major problem.
I wonder if is possible to flash phone with H960 firmware? Via LGUP app from my PC? Is it problem because my phone has no unlocked bootloader and in some posts on the internet I readed I can brick up my phone.
4G does not work either. Probably only korean version of LTE, not supported in Croatia.
So, if I do firmware upgrade via LGUP, with euro-version, will I get phone with only 32GB, will LTE bands be opened to euro-networks?
I didn't say that I can't upgrade my korean version to Android 6.0, via OTA or LG Bridge. It says Cannot check the latest firmware.
So, guys, to do it or stay out of any attempting?
Thanks and regards from Dubrovnik!
Is it true that noone knows?
Cannot, ne mozes! Just try to read a little more about it.
If you click the link you can see there is support for 4G in Croatia.
https://www.frequencycheck.com/compare-devices/ynatK8/lg-v10-h961n/lg-v10-h962
Pozdraviti iz Thailanda
I can see Croatian operators can offer me LTE 1800mHz only.
So, in suburbs of croatian big cities I have LTE, but only in streets, outside places etc. Whei I enter in some bar or restaurant, LTE wanishes.
I'm on VIPnet Croatia which provides LTE 800/1800. It seems my Korean V10 works only on 1800.
Too bad. Cause, it's good phone. I upgraded recently to Android 6.0 (MM) via link on this forum and it works even better than on 5.1.
On posts on this forum(s) I can see that my device cannot be flashed with another firmware. I've downloaded Turkish version (64GB) but LG UP says Error. It seems I have to root my device, but even than, it's not for sure that all LTE bands will working.
Koreans made the mess by locking with brandings their devices.
@moby77: for what I know, you can't flash a different firmware... a brick is nearly assured.
But you can try this code: 5457#*600# then go to Multi Band Selection and check LTE bands that are available in your Country.
Don't know if that procedure works in your device, but it well worth a try!
moby77 said:
Hi to all!
So, if I do firmware upgrade via LGUP, with euro-version, will I get phone with only 32GB, will LTE bands be opened to euro-networks?
Click to expand...
Click to collapse
I am not sure but most probably flashing wrong firmware will brick the phone. However, one thing I am sure is just flashing the firmware on different version never unlocks the bands of 3G/LTE. These bands cannot be unlocked this way. If F600L does not support a particular band in your country, it will not run LTE no matter what firmware you flash.
F600L is very well locked by Koreans so I san't do anything except flashing new kind of firmware, but one provided from U+ network.
One day I got mad, so I used LG UP, downloaded firmware for Turkish H960, and pressed Start button (it really was pissed off so even I bricked phone, my fault. Totaly insane, but...). After 4% od doing "something" it said Error, cannot flash firmware! (or something like this).
Official os
you have H901-10c official os bcz when i upgred using LGUP my phone is not starting as well as not showing charging sign when i am connect my charger