I lost my Xperia Z2, or is there still a solution? - Xperia Z2 Q&A, Help & Troubleshooting

Recently I installed a room on my Xperia Z2 (Ressurection Remix). It worked fine until I lost the password of my lock screen, and to solve I tried to access my recovery to give a wipe, however the room did not give access to my recovery (TWRP 3.0.2.0), to solve I tried to install my firmware Original Xperia Z2, by the flashtool, I installed all the drivers of my device and when I went to try to enter the flashmode mode the cell phone did not enter (lit a green LED and then red and turned off the device) the device goes into fastboot without problems, So after that I made a bigger asshole, by flashtool I put the device in fastboot mode and installed a TWRP kernel to see if it worked, it did not work. Now I have my device turned off and it does not turn on and only goes into fastboot. Could any kind soul help to fix my problem, or was it?

Same here op if you find a solution please tell me its been 8 hours till now and still cant find anything
all the buttons are working fine but cant power on the device or even get into flashmode.
as you said the green led flashes for a sec then reboot on and on
hope someone can solve this problem

Download an FTF from Xperia Firm make a bundle with that(everything is inside it) then flash it. When the windows pops up to connect hold volume - and connect it. It will be fine. Happened to me too. In flashtool flash screen allow it to wipe everything.

Laskr1999 said:
Download an FTF from Xperia Firm make a bundle with that(everything is inside it) then flash it. When the windows pops up to connect hold volume - and connect it. It will be fine. Happened to me too. In flashtool flash screen allow it to wipe everything.
Click to expand...
Click to collapse
its no use just tried this and didnt work for me , as i said earlier i cant access flash mode .the device it self is not recognizing the volume - key even if i spam it when it reach the pop-up or before that. and the key work just fine ,
the only thing that we can do now is to flash something via fastboot option but how ? i have no idea

Connect phone in fastboot mode and open a adb command window then enter in the commands to reboot into recovery or bootloader etc
Sent from my LG-H960 using Tapatalk
---------- Post added at 09:55 PM ---------- Previous post was at 09:52 PM ----------
https://www.guidebeats.com/2016/07/10/adb-fastboot-commands-ultimate-list/
Sent from my LG-H960 using Tapatalk

thanx for the fast answer
im not that expert using command so if you can give me a detailed command and what to do after every thing would be awesome i flashed the kernal and the recovery but didnt know how to flash the system using command line

o0oArchangelo0o said:
Connect phone in fastboot mode and open a adb command window then enter in the commands to reboot into recovery or bootloader etc
Sent from my LG-H960 using Tapatalk
---------- Post added at 09:55 PM ---------- Previous post was at 09:52 PM ----------
https://www.guidebeats.com/2016/07/10/adb-fastboot-commands-ultimate-list/
Sent from my LG-H960 using Tapatalk
Click to expand...
Click to collapse
i just tried this and everything was fine but when am trying to enter recovery mood i cant and the device is not working even that everything flashed correctly
guess that my device is missing the bootloader and need to be flashed to let me enter the bootloader but couldnt find any bootloader.img
will it work if i flashed the recovery in bootloader partition ?

Im jus checking but did you unlock the bootloader yourself or?

Alpha-2-omega said:
Im jus checking but did you unlock the bootloader yourself or?
Click to expand...
Click to collapse
yes i did unlock the bootloader a year ago but not sure if it still unlocked or get locked again no idea
and i dont know how to chick if its locked or not using fastboot tool cuz i cant access flashmode on this device which is something flashtool ask for to give you the bootloader statues
if you have any idea that would be great to tell me to try it :laugh:
---------- Post added at 01:39 AM ---------- Previous post was at 12:55 AM ----------
http://imgur.com/FTNXf5L didnt know how to upload the pic here see it in the link
this is what happend when i tried to chick bootloader statues and nothing shows after 5 min of waiting
so guess there is no bootloader if you have any idea about it

It looks like you have bricked your phone somewhere along the line of installing cm with remix rom, maybe you didnt flash correct kernel when changing idk but im out of ideas here

Alpha-2-omega said:
It looks like you have bricked your phone somewhere along the line of installing cm with remix rom, maybe you didnt flash correct kernel when changing idk but im out of ideas here
Click to expand...
Click to collapse
i went to some expert to fix it they told me that the internal memory need to be redistributed or if it didnt it had to be changed by changing the motherboard and this will cost about 130-150 $
so ya thats the problem now
if anyone know how to re program the internal memory that would be awesome

ElectricB said:
i went to some expert to fix it they told me that the internal memory need to be redistributed or if it didnt it had to be changed by changing the motherboard and this will cost about 130-150 $
so ya thats the problem now
if anyone know how to re program the internal memory that would be awesome
Click to expand...
Click to collapse
If you can access to fastboot then:
1- Flash the Boot.img from Lineage rom via fastboot using this command: fastboot flash boot boot.img
"boot.img" I assume you put the boot.img in the same dir with fastboot.
2- Flash TWRP Recovery via fastboot using this command: fastboot flash recovery recovery.img
I assume you put the recovery.img in the same dir with fastboot.
3- Boot into Recovery by using VOLUME UP when Sony logo comes up with pink notification light.
Link to recovery.img [url]https://mega.nz/#!iBQkgabb!B3G6dmlEMu-2xRV4w8Fl4xzRYlXSDgTeXhRtgevuT9A
And check the driver of fastboot and flashmod if it installed correctly and always use flashtool v0.9.18.6 only for Z2

darknessmc said:
If you can access to fastboot then:
1- Flash the Boot.img from Lineage rom via fastboot using this command: fastboot flash boot boot.img
"boot.img" I assume you put the boot.img in the same dir with fastboot.
2- Flash TWRP Recovery via fastboot using this command: fastboot flash recovery recovery.img
I assume you put the recovery.img in the same dir with fastboot.
3- Boot into Recovery by using VOLUME UP when Sony logo comes up with pink notification light.
Link to recovery.img [url]https://mega.nz/#!iBQkgabb!B3G6dmlEMu-2xRV4w8Fl4xzRYlXSDgTeXhRtgevuT9A
And check the driver of fastboot and flashmod if it installed correctly and always use flashtool v0.9.18.6 only for Z2
Click to expand...
Click to collapse
i was sure this wont work but i tried it to confirm
flashed them as you said but i cant power up the device ,the power button is working fine but cant power up
plugged the device directly into power source and tried to inter recovery mode as you said but nothing
the screen flashes with sony logo then reboot as fast as that
i was pressing volume button like a retarded maybe i will get into recovery mode but nothing happen
guess the only thing to do now is to change the motherboard since i have one from another device

Kawaiiluiz said:
Recently I installed a room on my Xperia Z2 (Ressurection Remix). It worked fine until I lost the password of my lock screen, and to solve I tried to access my recovery to give a wipe, however the room did not give access to my recovery (TWRP 3.0.2.0), to solve I tried to install my firmware Original Xperia Z2, by the flashtool, I installed all the drivers of my device and when I went to try to enter the flashmode mode the cell phone did not enter (lit a green LED and then red and turned off the device) the device goes into fastboot without problems, So after that I made a bigger asshole, by flashtool I put the device in fastboot mode and installed a TWRP kernel to see if it worked, it did not work. Now I have my device turned off and it does not turn on and only goes into fastboot. Could any kind soul help to fix my problem, or was it?
Click to expand...
Click to collapse
found the solution op the problem was that the battery is empty go charge it somewhere then flash the system you need
my device works like a charm now have fun :good:

ElectricB said:
found the solution op the problem was that the battery is empty go charge it somewhere then flash the system you need
my device works like a charm now have fun :good:
Click to expand...
Click to collapse
What?!! You supposed to check it before doing anyhing.

Related

{roms}-{kernel}-{bricking}-{customization}=all in one thread for xperias

THREAD OVERVIEW
Post 1 : ROMS FOR XPERIA MINI
Post 2 : ROMS FOR XPERIA MINI PRO
Post 3 : ROMS FOR XPERIA LIVE WITH WALKMAN
Post 4 : ROMS FOR XPERIA ACTIVE
Post 5 : COMMON ROMS
Post 5 : CUSTOM KERNEL
Post 6 : BRICKIG AND SOLUTION
Post 7 : CUSTOMIZATION
NOTE :
you can port any rom from other devices because XMP, XM and LWW brothers. and that is why we are in theard the same. porting means just, replace a few files. So you can do it Replace the hw_config, sensors.conf, copy smultron touch hex firmware file /etc_firmware/ and DELETE mango hex's, and edit the build prop /just replace all sk17 and mango or mini pro lines/. And this is all. Flash the mini kernel and install the rom.but for XMP, you must replace the "usr" to the physical keyboard and some file for the adjustment.
thanks to kamarush
BEFORE WE START THERE ARE SOME REQUIRMENTS TO FLASH A ROM AND KERNEL SUCH AS..
{1}.YOUR Bootloader MUST BE unlocked.I THINK 80% OF ROM NEEDS UNLOCKED BOOTLOADER..WITHOUT IT YOU CANT FLASH CUSTOM ROM...
THERE ARE TWO WAYS OR METHODS OF UNLOCKING BOOTLOADER...
(1).OFFICIAL WAY:http://unlockbootloader.sonyericsson.com/
(2).TEST POINT METHOD:http://forum.xda-developers.com/showthread.php?t=1285285
YOU WILL VOID YOUR WARRENTY IF YOU UNLOCK YOUR BOOTLOADER...
....YOU CAN FIND MORE INFORMATION ABOUT UNLOCKING BOOTLOADER ON ABOVE LINKS....
{2}.YOU MUST BE ROOTED AND HAVE CMW(ClockWorkMode) INSTALL ON YOUR PHONE
HOW TO FLASH CMW IS GIVEN HERE:http://forum.xda-developers.com/showthread.php?t=1345741
BEST WAY TO HAVE ROOT AND CMW IS TO FLASH CUSTOM KERNEL.
IF YOU HAVE ABOVE THINGS THEN YOU ARE READY TO GO...
...TO FLASH CUSTOM KARNEL YOU WILL NEED FLASTOOL:http://forum.xda-developers.com/showthread.php?t=1351309....
POST 1
ROMS FOR XPERIA MINI
1.MiniCMSandwich AOSP Android 4.0.3 RC2:http://forum.xda-developers.com/showthread.php?t=1434001
2.Flush78_v6S:http://forum.xda-developers.com/showthread.php?t=1423058
3.Clean 'n' Tweaked - v4.1:http://forum.xda-developers.com/showthread.php?t=1417621
4.ST15i (Mini) 4.0.2.A.0.62:http://forum.xda-developers.com/showthread.php?t=1439293
POST 2
ROMS FOR XPERIA MINI PRO
1.NeroDroid ROM v5:http://forum.xda-developers.com/showthread.php?t=1458963
2.Lewa OS:http://forum.xda-developers.com/showthread.php?t=1462678
3.SK17i (Mini Pro) 4.0.2.A.0.62:http://forum.xda-developers.com/showthread.php?t=1439298
POST 3
ROMS FOR XPERIA LIVE WITH WALKMAN
1.XROM™ v1.4:http://forum.xda-developers.com/showthread.php?t=1538083
2.WT19i (Live with Walkman) 4.0.2.A.0.62:http://forum.xda-developers.com/showthread.php?t=1439311
3.MIUIv4 beta 2 build 2:http://forum.xda-developers.com/showthread.php?t=1490166
4.[IPHONE-STYLE]Joy os:http://forum.xda-developers.com/showthread.php?t=1540755
POST 4
ROMS FOR XPERIA ACTIVE
1.Spartan Rom V1.8.5:http://forum.xda-developers.com/showthread.php?t=1375991
2.ST17i (Active) 4.0.2.A.0.42:http://forum.xda-developers.com/showthread.php?t=1310292
POST 5
COMMON ROMS
1.CM7.2.0-FXP114:http://forum.xda-developers.com/showthread.php?t=1226715
2.CM9.0-FXP114:http://forum.xda-developers.com/showthread.php?t=1445821
3.HYBROM v16:http://forum.xda-developers.com/showthread.php?t=1373435
4.MIUIv4 2.3.16:http://forum.xda-developers.com/showthread.php?t=1554996
5.Xperia UXP NXT:http://forum.xda-developers.com/showthread.php?t=1520456
6.ExMIUIv4 2.3.30-r1:http://forum.xda-developers.com/showthread.php?t=1578109
7.MiniCMSandwich AOSP Android 4.0.4 RC3:http://forum.xda-developers.com/showthread.php?t=1434001
POST 6
CUSTOM KERNEL
1.[Mini/MiniPro/LiveWithWalkman/Active] Rage Kernel v2.6:http://forum.xda-developers.com/showthread.php?t=1398910
2.KRsH Kernel v3.0 (MiniPro):http://forum.xda-developers.com/showthread.php?t=1349630
3.[Mini/MiniPro/LiveWithWalkman/Active] X kernel 2.6.32.58 ZRAM:http://forum.xda-developers.com/showthread.php?t=1451150
4.NeroDroid Kernel(FOR NERODROID ROM):http://forum.xda-developers.com/showthread.php?t=1458963
5.b KERNELS(FOR SK17i-ST15i-WT19i):http://forum.xda-developers.com/showthread.php?t=1440161
6.KRsH Kernel v3.0 (Mini):http://forum.xda-developers.com/showthread.php?t=1351709
POST 6
BRICKIG AND SOLUTION
...I BRICK MY XPERIA MINI TWISE AND I MANAGE TO SOLVE IT..I AM ADDING THIS POST BEACAUSE I KNOW HOW IT FEELS WHEN YOUR MOBILE BRICKED..
{1}.IF YOU HAVE UNLOCK BOOTLOADER AND YOU ACCIDENTALLY RECEIVE FOTA THEN YOUR XPERIA WILL NOT START IT WILL JUST VIBRATE.
FOR SOLUTION GO HERE:http://forum.xda-developers.com/showthread.php?t=1126358..
{2}.IF YOU ACCIDENTALLY FLASH ANOTHER MODELS ROM ON YOUR PHONE..AND IF YOUR TOUCHSCREEN DOES NOT WORK
THEN GO HERE FOR SOLUTION:http://forum.xda-developers.com/showthread.php?t=1423562
{3}.NEXT TIME WHEN I BRICK MY MOBILE AND I ABLE TO FIND SOLUTION THEN I WILL POST HERE...
POST 7
CUSTOMIZATION
I AM ADDING THIS POST FOR THOSE WHO DONT WANT TO UNLOCK BOOTLOADER..
THAT MEANS TO CUSTOMIZE YOUR XPERIA YOU DONT NEED TO UNLOCK BOOTLOADER..
BUT YOU WILL NEED ROOT ACCESS AND CMW INSTALL ON YOUR MOBILE..
FOR THOSE WHO WANTS CMW WITH LOCK BOOTLOADER GO HERE:http://forum.xda-developers.com/showthread.php?t=1437840
THERE ARE PLENTY THREAD BUT I AM ADDING SOME OF THEM..REST YOU CAN CHECK IT OUT BY YOURSELF..
SO LETS GET STARTED..
1.Customizable Quickpanel, Flashlight toggle:http://forum.xda-developers.com/showthread.php?t=1306044
2.Xperia S v1.7:http://forum.xda-developers.com/showthread.php?t=1503570
3.IceCream Sandwich Xperia V4.0:http://forum.xda-developers.com/showthread.php?t=1453698
4.SE Mix ICS v4:http://forum.xda-developers.com/showthread.php?t=1482244
5.All In One-Live/Mini/Mini Pro/Active:http://forum.xda-developers.com/showthread.php?t=1404786
6.HTC Sense Theme:http://forum.xda-developers.com/showthread.php?t=1546345
If there is anything that I missed please send me a PM to have it added. Please provide a link in the PM, thanks.
If I helped you in anyway, please say thanks!
You should also post links to the stock kernels for the latest f/w's..... ;-)
amey2606 said:
you should also post links to the stock kernels for the latest f/w's..... ;-)
Click to expand...
Click to collapse
your request has been granted..
thanks but i need help......
a few days ago i'v accidentaly press Repair TA in Octopus SE 1.0.9 when my wt19i was connected in flash mode (the green light mode)
after that my phone starts normaly but i can't put my phone in flash mode any more
what does repair TA do to my phone
and who can i fix it
i'v a Thread here but not solved
http://forum.xda-developers.com/showthread.php?t=1466492
((( When I try to enter the download mode (green light), nothing happens
And by turning off the phone and then remove the battery for thirty seconds and then hold down the button on the vol - and while it put the cable to the phone
This way I follow you since the first use of the phone and they are successful and you use the flash tool to update the phone with ease
However, this method no longer working, and when applied to the phone continues to take off the battery charging status
I have experience on another computer and another cable but without the benefit of
even fastboot mode
but i can enter fastboot mode via flash tool 5 )))
Sony Ericsson PC Companion updated my phone three days ago to 62 stock room
but still cant enter flash mode
Is there any solution ......
note:
about the original TA file
i'v followed the path :
C:\Program Files (x86)\GsmServer\Octopus_SE\BACKUP
and found a file there :
WT19i_35850804005723_27-01-2012_01-36-04.TA
this is the original TA
now how to write it to my phone to restore (vol- & vol+ function)
ramezzidane said:
thanks but i need help......
a few days ago i'v accidentaly press Repair TA in Octopus SE 1.0.9 when my wt19i was connected in flash mode (the green light mode)
after that my phone starts normaly but i can't put my phone in flash mode any more
what does repair TA do to my phone
and who can i fix it
i'v a Thread here but not solved
http://forum.xda-developers.com/showthread.php?t=1466492
((( When I try to enter the download mode (green light), nothing happens
And by turning off the phone and then remove the battery for thirty seconds and then hold down the button on the vol - and while it put the cable to the phone
This way I follow you since the first use of the phone and they are successful and you use the flash tool to update the phone with ease
However, this method no longer working, and when applied to the phone continues to take off the battery charging status
I have experience on another computer and another cable but without the benefit of
even fastboot mode
but i can enter fastboot mode via flash tool 5 )))
Sony Ericsson PC Companion updated my phone three days ago to 62 stock room
but still cant enter flash mode
Is there any solution ......
note:
about the original TA file
i'v followed the path :
C:\Program Files (x86)\GsmServer\Octopus_SE\BACKUP
and found a file there :
WT19i_35850804005723_27-01-2012_01-36-04.TA
this is the original TA
now how to write it to my phone to restore (vol- & vol+ function)
Click to expand...
Click to collapse
are you having problem in flash mode and fastboot mod???that you are not able to access both mod..
akshay13071990 said:
are you having problem in flash mode and fastboot mod???that you are not able to access both mod..
Click to expand...
Click to collapse
exactly
i used to enter flash mode and flash generic roms
even fastboot mode
but i can enter fastboot mode now via flash tool 5 (fastboot via adb)
any help
ramezzidane said:
exactly
i used to enter flash mode and flash generic roms
even fastboot mode
but i can enter fastboot mode now via flash tool 5 (fastboot via adb)
any help
Click to expand...
Click to collapse
use Flashtool version 0.6.7...open flashtool connect your mobile via usb..check unknown source and usb debugging are on..you have to be in MSC mode instead of MTP mode to get into fastboot mode or flash mod..now to get into fastboot mod click on flash on flashtool 6.7..then there will two mode flashmod and fastboot mod..in flashboot you can flash tft files..and fastboot mode is to flash custom kernel..in fastboot mod just click on reboot into fastboot mode(via adb)..then your device will boot ino fastboot mode..then if you want to flash kernel then click on select kernel to flash..after flashing click on reboot device into system..if your device doesnt boot in to fastboot mode then check weather adb drivers are install or not..
akshay13071990 said:
use Flashtool version 0.6.7...open flashtool connect your mobile via usb..check unknown source and usb debugging are on..you have to be in MSC mode instead of MTP mode to get into fastboot mode or flash mod..now to get into fastboot mod click on flash on flashtool 6.7..then there will two mode flashmod and fastboot mod..in flashboot you can flash tft files..and fastboot mode is to flash custom kernel..in fastboot mod just click on reboot into fastboot mode(via adb)..then your device will boot ino fastboot mode..then if you want to flash kernel then click on select kernel to flash..after flashing click on reboot device into system..if your device doesnt boot in to fastboot mode then check weather adb drivers are install or not..
Click to expand...
Click to collapse
sorry man but maybe you haven't read my original post.....any way and for short
i have strange problem
http://www.youtube.com/watch?v=mM8wTDuzBPk&feature=youtu.be
turn off the phone
then vol-
then i but the usb cable
nothing happend and continue to charging mode and a photo of battery
i'v flashed my phone serveral times and using flashtool normaly
so i know whats im doing and doing it in the right way
ramezzidane said:
sorry man but maybe you haven't read my original post.....any way and for short
i have strange problem
http://www.youtube.com/watch?v=mM8wTDuzBPk&feature=youtu.be
turn off the phone
then vol-
then i but the usb cable
nothing happend and continue to charging mode and a photo of battery
i'v flashed my phone serveral times and using flashtool normaly
so i know whats im doing and doing it in the right way
Click to expand...
Click to collapse
sorry dude i have tell you what i know..i cant help you..
i hope you will solve your problem in future..
try to go to service center and tell them your problem...
ramezzidane said:
thanks but i need help......
a few days ago i'v accidentaly press Repair TA in Octopus SE 1.0.9 when my wt19i was connected in flash mode (the green light mode)
after that my phone starts normaly but i can't put my phone in flash mode any more
what does repair TA do to my phone
and who can i fix it
i'v a Thread here but not solved
http://forum.xda-developers.com/showthread.php?t=1466492
((( When I try to enter the download mode (green light), nothing happens
And by turning off the phone and then remove the battery for thirty seconds and then hold down the button on the vol - and while it put the cable to the phone
This way I follow you since the first use of the phone and they are successful and you use the flash tool to update the phone with ease
However, this method no longer working, and when applied to the phone continues to take off the battery charging status
I have experience on another computer and another cable but without the benefit of
even fastboot mode
but i can enter fastboot mode via flash tool 5 )))
Sony Ericsson PC Companion updated my phone three days ago to 62 stock room
but still cant enter flash mode
Is there any solution ......
note:
about the original TA file
i'v followed the path :
C:\Program Files (x86)\GsmServer\Octopus_SE\BACKUP
and found a file there :
WT19i_35850804005723_27-01-2012_01-36-04.TA
this is the original TA
now how to write it to my phone to restore (vol- & vol+ function)
Click to expand...
Click to collapse
TA stands for TrimArea.....
http://forum.xda-developers.com/showthread.php?t=1126358
Ask Bin4ry about it..
He knows better.....
nice thread akshay keep it up
metalrawk said:
nice thread akshay keep it up
Click to expand...
Click to collapse
thanks..
thanks any way
ramezzidane said:
thanks but i need help......
a few days ago i'v accidentaly press Repair TA in Octopus SE 1.0.9 when my wt19i was connected in flash mode (the green light mode)
after that my phone starts normaly but i can't put my phone in flash mode any more
what does repair TA do to my phone
and who can i fix it
i'v a Thread here but not solved
http://forum.xda-developers.com/showthread.php?t=1466492
((( When I try to enter the download mode (green light), nothing happens
And by turning off the phone and then remove the battery for thirty seconds and then hold down the button on the vol - and while it put the cable to the phone
This way I follow you since the first use of the phone and they are successful and you use the flash tool to update the phone with ease
However, this method no longer working, and when applied to the phone continues to take off the battery charging status
I have experience on another computer and another cable but without the benefit of
even fastboot mode
but i can enter fastboot mode via flash tool 5 )))
Sony Ericsson PC Companion updated my phone three days ago to 62 stock room
but still cant enter flash mode
Is there any solution ......
note:
about the original TA file
i'v followed the path :
C:\Program Files (x86)\GsmServer\Octopus_SE\BACKUP
and found a file there :
WT19i_35850804005723_27-01-2012_01-36-04.TA
this is the original TA
now how to write it to my phone to restore (vol- & vol+ function)
Click to expand...
Click to collapse
thank god i finally solve it by huge trick
http://forum.xda-developers.com/showpost.php?p=22427634&postcount=53
ramezzidane said:
thank god i finally solve it by huge trick
http://forum.xda-developers.com/showpost.php?p=22427634&postcount=53
Click to expand...
Click to collapse
that is a great news..and best of luck with your new born live with walkman
akshay13071990 said:
that is a great news..and best of luck with your new born live with walkman
Click to expand...
Click to collapse
thanks dude
akshay13071990 said:
THREAD OVERVIEW
I THINK 80% OF ROM NEEDS UNLOCKED BOOTLOADER..WITHOUT IT YOU CANT FLASH CUSTOM ROM...
Click to expand...
Click to collapse
Witch rom Can I flash with locked bootloader then?
piotrasss87 said:
Witch rom Can I flash with locked bootloader then?
Click to expand...
Click to collapse
Just stock rom, no more.
Sent from my SK17i using xda premium
piotrasss87 said:
Witch rom Can I flash with locked bootloader then?
Click to expand...
Click to collapse
all in one:http://forum.xda-developers.com/showthread.php?t=1404786
this is a kind of a rom..it changes all things..but dont have any script..but you can try rom toolbox pro from android market it has many features like sd card read speed font change,boot animation change..to do all this you need only root and cmw install...without unlocking bootloader...isnt it great.so if you want then try it..
I already mod my sk17i this way,only thoud there is something else I can do with it.Thanks any way.

Huawei MediaPad T1 S8-701u/S8-701w bootloder unlock TWRP recovery ROOT

Hi!
This is for Huawei Mediapad T1 S8-701w/u aka Mediapad T1 Honor.
As we all know this device has LOCKED bootloader and it is not rootable (only russsia firmware for s8-701u is)!
I am not responsible for bricks so procede at your own risk!
Read whole process before you begin.
First backup everything including internal SDcard!
1) This process will install factory unlocked ROM with just basic testing apps you will loose your curent ROM( we will return it on step 3)
Download: https://drive.google.com/file/d/0B7RlBIN4xO50RUxqU1E2ZGJmRUk/view?usp=sharing
Extract and copy dload folder do root of your removable sdcard (external sdcard)​Power off device​Hold volume down and turn on device​Wait till install process is done and device is booted again​
2) Install custom TWRP recovery
Connect device to computer (ADB, fastboot needed and drivers installed)​Download recovery.img from http://d-h.st/saW and copy to same folder with adb and fastboot​Type:
Code:
adb reboot bootloader
Once you are in bootloader (huawei logo) :​
Code:
fasboot flash recovery recovery2.img
When done reboot (hold power button) or:​
Code:
fastboot reboot
3) Now lets recover our original ROM:
Download rom for your device ( 701u or 701w)​Here are some links:​http://susutun1.blogspot.com/2014/08/android-firmware-huawei-s-series.html
http://forum.xda-developers.com/showpost.php?p=56376056&postcount=2
http://forum.xda-developers.com/showpost.php?p=57592296&postcount=20
http://forum.xda-developers.com/showpost.php?p=58036946&postcount=33
Here is western europe images for S8-701w I use this one
It is the best available firmware for 701w (also multilanguage)https://drive.google.com/file/d/0B7RlBIN4xO50QlFVSFZkWlhRX2c/view?usp=sharing
I can provide more firmwares but i have slow upload speed so I ask for someone here who can reupload them. I will send him link to inbox (limited download).
Extract UPDATE.app from firmware​Download Huawei extractor (windows tool)​http://forum.xda-developers.com/showthread.php?t=2433454
Open UPDATE.app with Huawei update extractor and extract SYSTEM.img and CUST.img (right click on images)​Copy SYSTEM.img and CUST.img to your fastboot folder​Reboot to bootloader​
Code:
adb reboot bootloader
Once you are in bootloader (huawei logo) :​
Code:
fasboot flash system SYSTEM.img
fasboot flash cust CUST.img
Turn device off and boot to recovery (hold vol down and turn on)​In recovery: Factory reset (format /data) and reboot.​
Done!!
If you get stuck in bootloder unable to boot in recovery:
flash and boot into stock recovery to clear bootloder flag
then you can flash TWRP again Here it is:http://d-h.st/in71 (stock recovery)
Code:
fastboot flash recovery stockrecovery.img
To ROOT flash http://download.chainfire.eu/supersu in recovery
Recovery: newest TWRP http://d-h.st/saW
BUGS:
Internal sdcard is mounted to /data/media, while on device /storage/emulated so use external SDcard.
Also because of wrong mounts when you do wipe it will delete everything on internal SDcard (only /data/media will stay)
TOUCH dont work when booted: just wait till screen off timeout (10s), then press power to turn screen on it will work now
Sorry for bad english!
Recovery downloads:
Version 1: http://d-h.st/JRp
Version 2:http://d-h.st/saW
Changelog: Fixed touchscreen issues!!​
Couldn't be better timing. Just received my 701w unit (Iskon HR)
Hi,
I did everything according to the instructions, but cannot enter the Custom Recovery. :crying:
I tried and CWM and TWRP.
ADB Tool shows that all goes well, but when I press any combination of buttons to enter the Recovery, Tablet enters in the bootloader ...
Now cannot install a different ROM, because it does not start Stock Recovery to initiate dload, it enters the bootloader and standing there.
Do you have any idea what to do ...?
Edit: From Now as soon as plug the USB cable Tablet lights up ...
Edit: Nothing deleted on the internal SD card... Still I can see my old files
darko150 said:
Hi,
I did everything according to the instructions, but cannot enter the Custom Recovery. :crying:
I tried and CWM and TWRP.
ADB Tool shows that all goes well, but when I press any combination of buttons to enter the Recovery, Tablet enters in the bootloader ...
Now cannot install a different ROM, because it does not start Stock Recovery to initiate dload, it enters the bootloader and standing there.
Do you have any idea what to do ...?
Click to expand...
Click to collapse
Can you explain what did you did last? Recovery, system, and cust images are flashed with fastboot in bootloader mode. There is only twrp recovery image here to download.
it Works
iodak said:
Can you explain what did you did last? Recovery, system, and cust images are flashed with fastboot in bootloader mode. There is only twrp recovery image here to download.
Click to expand...
Click to collapse
Thank you very much for your help in PM. With this Recovery2 in Post #2, Tablet works beautifully, and the entire process is quick and easy.
Root and TWRP Recovery I have, I can adjust the rest ... :laugh::good:
darko150 said:
Thank you very much for your help in PM. With this Recovery2 in Post #2, Tablet works beautifully, and the entire process is quick and easy.
Root and TWRP Recovery I have, I can adjust the rest ... :laugh::good:
Click to expand...
Click to collapse
Thanks for the info. I updated first post with more info on how to resolve issue if stuck in bootloader, unable to boot to recovery!
Now that we are unlocked we should make some presure (send emails) to Huawei to release kernel source!
It would be interesting to see is it somehow possible to flash 701w with 701u FW, because as I can see on my tablet, it seems that SIM connector is here, but filled with some kind of rubber sponge material.
It is posibble. Just use system and cust images from u version. I am not sure if the sim connector is in. Cant get that sponge out.
Edit: that factory unlocked update.app is from u version anyway
Edit2 I think that all roms are similar they just disabled some stuff for wifi version with config files.
like /cust/channel/*/prop/local.prop
ro.config.wifi.only=true
iodak said:
I am not sure if the sim connector is in. Cant get that sponge out.
Click to expand...
Click to collapse
Is there any link to see how to disassemble this tablet?
It would be much easier to put the sponge out with removed back plate.
Viper4Android
Thanks to iodak i rooted my tablet,everything works perfectly,but i cant install viper4Android...driver not install because busybox not work or i am not have fully rooted device..Viper4Android that say...Any solution?
gogy3d said:
Thanks to iodak i rooted my tablet,everything works perfectly,but i cant install viper4Android...driver not install because busybox not work or i am not have fully rooted device..Viper4Android that say...Any solution?
Click to expand...
Click to collapse
I installed Busybox after I turned off "Mount namespace separation" in SuperSu
---------- Post added at 05:16 PM ---------- Previous post was at 05:04 PM ----------
there was a problem: as soon as I push cable in tablet, from the charger or computer, tablet turn on, although previously it was switched off. Now I can not recharge when tablet is switched off, just when he is turned on...
I didn't do offline charging. I will see what i can do. That is not really a problem.
darko150 said:
I installed Busybox after I turned off "Mount namespace separation" in SuperSu
---------- Post added at 05:16 PM ---------- Previous post was at 05:04 PM ----------
there was a problem: as soon as I push cable in tablet, from the charger or computer, tablet turn on, although previously it was switched off. Now I can not recharge when tablet is switched off, just when he is turned on...
Click to expand...
Click to collapse
Me too---there is a problem offline charging,they not there.. i turn cable in charger tablet is turn on,only online charging,why?
iodak said:
I didn't do offline charging. I will see what i can do. That is not really a problem.
Click to expand...
Click to collapse
The truth is, this is not a problem, but it is unusual ...
darko150 said:
The truth is, this is not a problem, but it is unusual ...
Click to expand...
Click to collapse
Same here.Im unable to load recovery unless i use ADB command on PC???
Any help?
Vol down when powering on will get you to recovery.
Also in terminal emulator app
su
reboot recovery
I have to hold the buttons Power and Vol- right up to the moment when it appears Huawei logo. Then go into TWRP Recovery.
If I let a moment sooner or later, can not enter the recovery.
Although there are small imperfections, I'm very satisfied, thanks IODAK :good:
I use https://play.google.com/store/apps/details?id=com.siriusapplications.quickboot&hl=hr quickboot to go in recovery.App needs root.
Or use standard procedure hold vol- power on...
Who knows when is build custom rom for S8-701W?

[Q] i cant get TWRP recovery installed via either , SP Flash tools nor Fastboot

I did everything that was stated in the how to's but to no avail. additionally i cant get TWRP installed via fatboot, i have checked and crosschecked usb debugging and unlock OEM , but i cant get it to work , with SP Flash my phone pops up and vanishes in the hardware manager withing fractions of a second so it doesnt work with the sp Flash , in fastboot it wont let me download to recovery even if i use the command line oem unlock , because the volume up button that you have to use to accept[yes] doesnt work , only the vol down[no ] button has an effect, anyone any ideas anyone?
?
Kylekassar said:
I did everything that was stated in the how to's but to no avail. additionally i cant get TWRP installed via fatboot, i have checked and crosschecked usb debugging and unlock OEM , but i cant get it to work , with SP Flash my phone pops up and vanishes in the hardware manager withing fractions of a second so it doesnt work with the sp Flash , in fastboot it wont let me download to recovery even if i use the command line oem unlock , because the volume up button that you have to use to accept[yes] doesnt work , only the vol down[no ] button has an effect, anyone any ideas anyone?
?
Click to expand...
Click to collapse
To use SP Flash tools, turn the phone off, press download on the software then plug the phone in. The preloader is only meant to show for a short time (a fraction of a second to a few seconds) so SPFT needs to be sending the signal to download in that time window.
What I've also found works is to press download on SPFT then press and hold power and volume up until the device starts downloading.
thx for the quick answer i will try a.s.a.p.
Kylekassar said:
thx for the quick answer i will try a.s.a.p.
Click to expand...
Click to collapse
Tried but it doesnt work , i starts the dload but then i end up on brom error : STATUS_PRELOADER_INVALID(0xC0030004) no recovery flashed
Kylekassar said:
Tried but it doesnt work , i starts the dload but then i end up on brom error : STATUS_PRELOADER_INVALID(0xC0030004) no recovery flashed
Click to expand...
Click to collapse
That could be a couple of things:
Which SPFT version are you using? If its an older version try using a newer one.
Or
The scatter file you loaded is not good, download a stock firmware and use the scatter file from that.
Try this:
fastboot flash recovery "filename".img
or
fastboot flash boot "filename".img
Do you have the MTK drivers installed? What does your phone appear as in the Device Manager? Like others have said, once you've chosen your scatter file and recovery to flash, hit download and then plug in the phone.
Managed to fix this? I have the exact same problem and not able to fix it till now....
I'm in a similar situation. I CAN get my phone to flash recovery in SPFT and get a lovely big green tick but when I power off and boot into recovery using power and volume up it boots into the stock android recovery rather than TWRP.
Going another way via ADB, I can get the phone detected but when I send the OEM unlock bootloader command I am unable to use volume up to confirm. Only the volume down key works to cancel.
All I want is to put viper4android on. Never had any issues until this phone.
chandlerp said:
I'm in a similar situation. I CAN get my phone to flash recovery in SPFT and get a lovely big green tick but when I power off and boot into recovery using power and volume up it boots into the stock android recovery rather than TWRP.
Going another way via ADB, I can get the phone detected but when I send the OEM unlock bootloader command I am unable to use volume up to confirm. Only the volume down key works to cancel.
All I want is to put viper4android on. Never had any issues until this phone.
Click to expand...
Click to collapse
Are you 100% sure the recovery.img you flashed was TWRP?
Absolutely. Downloaded from this very site. It was this one: recovery_TWRP_3021_P9000.img
---------- Post added at 02:23 PM ---------- Previous post was at 02:17 PM ----------
Did an OTA update this morning and am showing as on build number Elephone_P9000_20160608 now. Haven't tried flashing since the update as I'm at work with locked down computers. Was going to try again over the weekend. Which recovery and version of flash tools would you recommend trying this time?
thanks for any advice.
Actually I have the same problem.
I tried to reinstall the drivers because it seems to be not the correct one. Here is a pic: i.imgur.com/FoUnVyz.png
After I read somewhere that i can try and hold down Volume+ while connecting my phone to the pc where i started the download in sp tools prior.
I got this error code: STATUS_PRELOADER_INVALID(0xC0030004)
And here I am with a not-up-to-date elephone p9000.
Anybody care to help me?
I'm in the same situation, tried everything - flashtool recovery.img separate in download mode, flashtool in update mode full 7.0 with replaced original recovery.img with TWRP one, played with fastboot with no luck as did not find the way to OEM UNLOCK it - vol + not reacting. Bought the phone on Gearbest, looks like it's locked very hard.
Can't install TWRP
Me too! I've updated my p9000 to latest stock v7 rom with spft. I can't install twrp recovery despite getting a geen tick from spft. Tried four times but it won't overwrite the stock rom recovery. A locked bootloader seems to be the popular diagnosis but spft doesn't use the bootloader. What else could it be? Ideas very welcome.
Did you boot into recovery immediately after flashing? A normal system boot will overwrite TWRP with the stock recovery. Once you start TWRP there is an option to prevent this from happening.
Can't install TWRP
Thanks for the suggestion. I flashed twrp again but it won't boot into recovery afterwards without a restart, just hangs. Stiĺl on stock recovery.

REDMI NOTE 3 Complete Dead!!! Only Red Light Blinking

Hii Friends,
I am new to xda as i got an problem with my Redmi Note 3.
Specs Before Dead:
Miui 8.2.4
Android 6.0
32 Gb Rom,3 Gb Ram
I was trying to flash Android 8.0 Rom via Twrp {Flashed Through Mi Flash Tool}. Twrp Flashed Successfully and Then I started with flashing with Oreo Rom.It also got flashed successfully but the problem I think is I forgot to flash Lazy Flasher due to which the phone booted but was lock even though i entered the right password It started to reset the phone. Then the phone turned off never revived from there.
As I tried to power up many times and tried almost all the combination Keys like Power+Vol up,Power+Vol down,Power+Vol up+Vol Down,etc.Only Red Light is blinking while connected to charging or PC. In PC the Port shows Qualcomm 900E and cannot be recognized in Mi Flash Tool. As Mi flash tool detects Qualcomm 9008.Even I manually Tried to change the driver to 9008 but didn't help me to flash the ROM.Shown an error: Device attached is not working; in Mi Flash Tool
Even I showed in a repair center near me but he ended up with no solution even. I have been trying to get it in Edl mode so that i can flash Fast boot Rom but no clue for that.
If any clue for this would be really appreciated!!!
Your Believer
R$(Rishabh Sharma)
Thinker Hour =)
Here you go:
https://forum.xda-developers.com/re...mi-note-3-pro-special-edition-mm-rom-t3453470
Say if it was working
Useless Thread Dude
Maximaro said:
Thinker Hour =)
Here you go:
https://forum.xda-developers.com/re...mi-note-3-pro-special-edition-mm-rom-t3453470
Say if it was working
Click to expand...
Click to collapse
As I mentioned all the problem in the thread....there's nothing wrong with bootloader.
Thanks but no thanks
More info required: Official unlock or Unofficial unlock?
After flashing oreo ROM lazy flasher is not required you need to format data ( apart from wiping data ) to boot the device.
when connected to PC when the red light is blinking that means you're in EDL mode, now try holding power + vol down button, keep holding until you get a vibration & get into fastboot mode.
Then you can use fastboot commands to check if the bootloader is still unlocked & can flash TWRP again if erased.
But, if device is unable to enter fastboot mode then you must flash MIUI fastboot ROM through EDL.
The procedure is the same for flashing but you need appropriate drivers en.miui.com/forum.php?mod=attachment&aid=NzU4MzF8ZWU0ZWM1OTR8MTM5ODc1NDUzM3w2NDg1MDkzM3wxOTY5Nw%3D%3D
look like EDL mode
I can buy ur phone if u want to sell it. Reply if u r interested.
Unofficial Unlock
VaibhavKumar07 said:
More info required: Official unlock or Unofficial unlock?
After flashing oreo ROM lazy flasher is not required you need to format data ( apart from wiping data ) to boot the device.
when connected to PC when the red light is blinking that means you're in EDL mode, now try holding power + vol down button, keep holding until you get a vibration & get into fastboot mode.
Then you can use fastboot commands to check if the bootloader is still unlocked & can flash TWRP again if erased.
But, if device is unable to enter fastboot mode then you must flash MIUI fastboot ROM through EDL.
The procedure is the same for flashing but you need appropriate drivers
I have tried holding all the combination keys as mentioned earlier but no results. So without getting in Fastboot mode i cannot flash the rom and I don't think so that my device is in EDL mode because PC device manager shows Qualcomm 900E instead of 9008.
Thanks for replying to the thread and please provide other solution.
Click to expand...
Click to collapse
OK
forever.parv said:
I can buy ur phone if u want to sell it. Reply if u r interested.
Click to expand...
Click to collapse
ok
Hello,
Is there a solution to this problem? I too have the exact issue now.
Thanks
Rahim.
I am ready to buy the phone + also can help you solve the issue.. which one do you want
Test Point Method
bro just go for test point method, it works for me
for that use have open backcover of your phone
Solution please
evansourav said:
I am ready to buy the phone + also can help you solve the issue.. which one do you want
Click to expand...
Click to collapse
It would be great if u provide a solution for this.
Rishabh Sharma_10 said:
It would be great if u provide a solution for this.
Click to expand...
Click to collapse
Can you turn off the device?
Yudhz® said:
look like EDL mode
Click to expand...
Click to collapse
Yeah his phone in EDL mode. I went through this problem. Now everything is working fine.
---------- Post added at 05:19 PM ---------- Previous post was at 05:15 PM ----------
You're already in EDL mode. So start from edl part. Try this... http://en.miui.com/thread-235865-1-1.html
evansourav said:
Can you turn off the device?
Click to expand...
Click to collapse
The device is already dead.
What happens when you plug charger? What about Qualcomm QHSUSB BULK? Is it showing up in EDL? Vibration Works? LCD Backlight Turns On?
santoshbodake said:
bro just go for test point method, it works for me
for that use have open backcover of your phone
Click to expand...
Click to collapse
Once happened to me this method worked for me
same issue here have you got any solution
This happens to me once...but i got it solved. This is really an edl mode of the phone. Keep trying connecting it to pc and try pressing those volume and power buttons if there is any voice connecting to pc means your phone is not dead. So, keep trying.
https://forum.xda-developers.com/redmi-note-3/how-to/unlock-unofficially-install-zcx-twrp-t3586778
Here, this helped me. If you follow the instructions correctly, you will be able to unlock bootloader, boot into twrp and then flash your custom rom. Skip to the part when you will have the red led blinking.
Hope it helps.

Flashtool only detects fastboot mode, stuck on Sony logo

Hi there,
my mate gave me his Xperia Z2 asking if I could fix it. He said it's stuck in boot loop. I thought it'd be an easy fix but I am experiencing a problem that I think (I hope I'm wrong) is hardware related.
The phone is indeed stuck on the sony logo and won't go past it. It responds to power+volume up (buzzes 3 times). I can put it into fastboot mode (blue LED, flashtool recognizes the phone in fastboot mode). However, I can't put it into flashmode (LED goes green, but flashtool doesn't recognize it, Windows and Sony Companion doesn't either btw).
Has anyone had this problem before and knows how to fix it or is it indeed a hardware issue?
TIA guys
Cheers
Edit: All the drivers are installed, I have tried two different computers, previous flashings were no prob.
Supertramp89 said:
Hi there,
my mate gave me his Xperia Z2 asking if I could fix it. He said it's stuck in boot loop. I thought it'd be an easy fix but I am experiencing a problem that I think (I hope I'm wrong) is hardware related.
The phone is indeed stuck on the sony logo and won't go past it. It responds to power+volume up (buzzes 3 times). I can put it into fastboot mode (blue LED, flashtool recognizes the phone in fastboot mode). However, I can't put it into flashmode (LED goes green, but flashtool doesn't recognize it, Windows and Sony Companion doesn't either btw).
Has anyone had this problem before and knows how to fix it or is it indeed a hardware issue?
TIA guys
Cheers
Edit: All the drivers are installed, I have tried two different computers, previous flashings were no prob.
Click to expand...
Click to collapse
Is the bootloader Unlocked???
If yes then try flashing a kernel that has built-in recovery and clean flash a new rom
It may helps
Hi, thanks for the reply. I'm afraid the bootloader is still locked, tried to flash a kernel already, it won't let me so I assume it's locked.
Supertramp89 said:
Hi, thanks for the reply. I'm afraid the bootloader is still locked, tried to flash a kernel already, it won't let me so I assume it's locked.
Click to expand...
Click to collapse
Maybe you can unlock bootloader and then flash a kernel(try it at your own risk)
Okay, thanks, will do that. I would have liked to find a way without unlocking the bootloader (wanted so save keys first) but it seems that it's the only way since I can't make it into flash mode. Will give an update after!
Hi there.
Unfortunately I couldn't unlock the bl. I assume, USB debugging isn't enabled. Any ideas?
Supertramp89 said:
Hi there.
Unfortunately I couldn't unlock the bl. I assume, USB debugging isn't enabled. Any ideas?
Click to expand...
Click to collapse
I think there is some gadgets out there that will force your phone to boot to flash mode(im not sure) or you can search "how to force Xperia phone to boot to flash mode" it may helps
If you cannot access fastboot or flash mode there is nothing you can do
Cool, will do, thanks.
Just to clarify: I can access fastboot mode fine, it's just flash mode that isn't recognized! Will post an update.
Supertramp89 said:
Cool, will do, thanks.
Just to clarify: I can access fastboot mode fine, it's just flash mode that isn't recognized! Will post an update.
Click to expand...
Click to collapse
I meant with locked bootloader accessing to fastboot is not useful
raminta said:
I meant with locked bootloader accessing to fastboot is not useful
Click to expand...
Click to collapse
Ah, I see. Well, anyway, I tried to find a way to force the phone into flash mode but nothing worked. Very annoying but I think I'm gonna call it quits.
Thanks for your help anyway, appreciated!
It seems like a firmware issue than a hardware one.
It's either falshtool compatibility issues , a soft-bricked phone or both.
1 - Try using an older version of flashtool like 0.9.18.6 and see if flashmode works.
2 - If you know the current firmware version
you can just flash the stock,signed kernel via fastboot.
xperia z2 stucked on sony xperia logo
Hey i have same problem my xpera z2 is also stucked on sony xperia logo, i cant even software repair my phone with sonycompanion app, I have unlocked bootloader ,please have any solution......
---------- Post added at 03:49 AM ---------- Previous post was at 03:29 AM ----------
raminta said:
I meant with locked bootloader accessing to fastboot is not useful
Click to expand...
Click to collapse
Hey i have bootloader unlocked what can i do to repair my phone....
it stucked on sony logo,,,
ihave unlocked bootloader,and rooted my device..
it all happen when i was trying to install android 0reo 8.0 ROM..
please help..:crying:
DedSec_35 said:
Hey i have same problem my xpera z2 is also stucked on sony xperia logo, i cant even software repair my phone with sonycompanion app, I have unlocked bootloader ,please have any solution......
---------- Post added at 03:49 AM ---------- Previous post was at 03:29 AM ----------
Hey i have bootloader unlocked what can i do to repair my phone....
it stucked on sony logo,,,
ihave unlocked bootloader,and rooted my device..
it all happen when i was trying to install android 0reo 8.0 ROM..
please help..:crying:
Click to expand...
Click to collapse
Flash another kernel and clean rom
raminta said:
Flash another kernel and clean rom
Click to expand...
Click to collapse
how can i do that, have you any procedure...? please
Supertramp89 said:
Hi there,
my mate gave me his Xperia Z2 asking if I could fix it. He said it's stuck in boot loop. I thought it'd be an easy fix but I am experiencing a problem that I think (I hope I'm wrong) is hardware related.
The phone is indeed stuck on the sony logo and won't go past it. It responds to power+volume up (buzzes 3 times). I can put it into fastboot mode (blue LED, flashtool recognizes the phone in fastboot mode). However, I can't put it into flashmode (LED goes green, but flashtool doesn't recognize it, Windows and Sony Companion doesn't either btw).
Has anyone had this problem before and knows how to fix it or is it indeed a hardware issue?
TIA guys
Cheers
Edit: All the drivers are installed, I have tried two different computers, previous flashings were no prob.
Click to expand...
Click to collapse
Are you sure you have the proper flashtool drivers installed? What's the Windows and Flashtool version? And have you connected any other Xperia device in flashmode mode to the same pc before?
I am saying that it is 90% a driver issue..
-Try disabling Driver signature on Windows 10 or 8 then reinstalling Flashmode AND Xperia Z2 drivers from the folder drivers in the main flashtool folder, then restart the pc..
- Try connecting a different USB cable
- Try connecting to a different USB port..
- And when you want to flash the firmware.. Select flash.. Select the firmware.. Check the wipe options (optional).. Press flash.. And after that when flashtool asks to connect the device in flashmode connect it.. Do not connected it BEFORE pressing flash..
Hope this will help you.. Have a good time..
Bye
DedSec_35 said:
how can i do that, have you any procedure...? please
Click to expand...
Click to collapse
Search how to flash kernel through fastboot on sony device or you can use flashtools just connect your phone with fastboot thrn select the thunder button on flashtools and choose fastboot the choose flash kernel
I think you have faced boot loop because you flashed android 8 and didn't flashed kernel
raminta said:
Search how to flash kernel through fastboot on sony device or you can use flashtools just connect your phone with fastboot thrn select the thunder button on flashtools and choose fastboot the choose flash kernel
I think you have faced boot loop because you flashed android 8 and didn't flashed kernel
Click to expand...
Click to collapse
yeah this all happen when i tried to install android 8...
thanks brother i'll try that one , do you have any site for downloading kernel for xperia z2,,
raminta said:
Search how to flash kernel through fastboot on sony device or you can use flashtools just connect your phone with fastboot thrn select the thunder button on flashtools and choose fastboot the choose flash kernel
I think you have faced boot loop because you flashed android 8 and didn't flashed kernel
Click to expand...
Click to collapse
hey,thank you so much it worked...i have flASHED marshmallow ftf file. is there anything again i have to do....or its ok to procede
DedSec_35 said:
yeah this all happen when i tried to install android 8...
thanks brother i'll try that one , do you have any site for downloading kernel for xperia z2,,
Click to expand...
Click to collapse
You can find kernel in rom zip
raminta said:
You can find kernel in rom zip
Click to expand...
Click to collapse
it worked thank you so much you saved my day,.i was about to gave up and about to go to sony service centre , but i thaught lets have last try, and it worked,,, thank you so much...

Categories

Resources