Hello guys. I am having fingerprint issues in ROMs based on CM / AOPS. When I install a ROM, at first, it works normal, but with two days or more it gets very bad. It is difficult to register new digital ones. What can it be?
Have you tried RR?
try aida64 app to see which finger print sensor u have flash kernal which support it . it will work bro
Search for MIUI MM firmware for redmi note 3 and flash it.I faced this problem too but after flashing firmware it worked
Sent from my Redmi Note 3 using Tapatalk
Related
Device - Xiaomi Redmi 2 Prime (Config & Info)
Recently Xiaomi Redmi 2 Prime Launched in India (Made In India) & I am Proud to Have It
I am Coming from OPO & Loved that a Hell Lot except the SIZE!
Now I have few Quarries (I was not able to get clear answers from MiUi)
01. Is the ROMs from Redmi 2 (1GB/8GB) are also working for Redmi 2 Prime (2GB/16GB) ?
02. What is the Most Stable & Close to Stock Android ROM Available? (No Launchers Idea Please!)
03. What about Modem Files of this Device??
What I Need is a clean ROM something like Paranoid Android Kitkat ROM For OPO (Most Stable & Clean Rom I have ever Used)..
If anyone is having this device .. & can suggest me something .. Will be thankful.. If not forward it to someone may be who can help.
### Redmi 2 (1GB/8GB) And Redmi 2 Prime (2GB/16GB) are different in my eyes..so please mention if YOU HAVE IT ALREADY
evansourav said:
Device - Xiaomi Redmi 2 Prime (Config & Info)
Recently Xiaomi Redmi 2 Prime Launched in India (Made In India) & I am Proud to Have It
I am Coming from OPO & Loved that a Hell Lot except the SIZE!
Now I have few Quarries (I was not able to get clear answers from MiUi)
01. Is the ROMs from Redmi 2 (1GB/8GB) are also working for Redmi 2 Prime (2GB/16GB) ?
02. What is the Most Stable & Close to Stock Android ROM Available? (No Launchers Idea Please!)
03. What about Modem Files of this Device??
What I Need is a clean ROM something like Paranoid Android Kitkat ROM For OPO (Most Stable & Clean Rom I have ever Used)..
If anyone is having this device .. & can suggest me something .. Will be thankful.. If not forward it to someone may be who can help.
### Redmi 2 (1GB/8GB) And Redmi 2 Prime (2GB/16GB) are different in my eyes..so please mention if YOU HAVE IT ALREADY
Click to expand...
Click to collapse
+1
evansourav said:
Device - Xiaomi Redmi 2 Prime (Config & Info)
Recently Xiaomi Redmi 2 Prime Launched in India (Made In India) & I am Proud to Have It
I am Coming from OPO & Loved that a Hell Lot except the SIZE!
Now I have few Quarries (I was not able to get clear answers from MiUi)
01. Is the ROMs from Redmi 2 (1GB/8GB) are also working for Redmi 2 Prime (2GB/16GB) ?
02. What is the Most Stable & Close to Stock Android ROM Available? (No Launchers Idea Please!)
03. What about Modem Files of this Device??
What I Need is a clean ROM something like Paranoid Android Kitkat ROM For OPO (Most Stable & Clean Rom I have ever Used)..
If anyone is having this device .. & can suggest me something .. Will be thankful.. If not forward it to someone may be who can help.
### Redmi 2 (1GB/8GB) And Redmi 2 Prime (2GB/16GB) are different in my eyes..so please mention if YOU HAVE IT ALREADY
Click to expand...
Click to collapse
+1
Sent from my 2014818 using Tapatalk
I don't have it right now, but I have ordered one. Meanwhile, check this thread from MIUI forum.
Keep us posted if you find any other working ROMs for Prime.
just launched in Indonesia, looking forward to have these info aswell
thanks
Tried several CM 12.1 based Roms and having troubles with calling. As soon as I dial a number, it shows call ended and I can't even place a call.
Please anyone help !!
AOSP 5.1.1 Rom
You could try this rom, if it works perfectly do let us know. I dont see a reason why it shouldn't. The box of the phone says redmi 2.
http://forum.xda-developers.com/android/development/roms-nexus-experience-release-9-8-2-t3216494
got my redmi 2 prime yesterday..
http://en.miui.com/thread-148731-1-1.html
Follow this thread for the closest Stable experience
Redmi 2rime battery backup is not that good
naveen n said:
Redmi 2rime battery backup is not that good
Click to expand...
Click to collapse
+1
Hey Guys Some one Explain it on MiUI forums.....
As many of you are aware, Xiaomi released the Redmi 2 Enhanced Edition (or Pro Edition as it is known elsewhere) with 2GB RAM and 16GB Storage back in February. However the only model released was the HM2014813 China Mobile version. Funnily enough this phone fully supports global GSM/HSPA frequencies and even has better LTE band support as it works on both 1800 & 2600MHz across Europe and Asia. Not only that but many resellers are now selling this device to international customers.
Whilst Xiaomi has released other Redmi 2 versions across India, Hong Kong, Singapore, Malaysia etc they are all based on the standard 8GB model with 1GB RAM. These are built off the China Unicom HM2014811 model and as a result the MIUI 6 Global ROM works across all of these versions. However previously when attempting to flash the Global ROM onto the 2014813 model, the installation would fail.
Initially most users and moderators believed this to be due to the difference in RAM across the models, with one having 1GB RAM and the other having 2GB RAM.
Some users though speculated that this actually wasnt the reason as the Xiaomi MI3 and Xiaomi MI4 share a ROM under the Cancro model name. This is despite a difference in RAM (2GB & 3GB respectively) and even a different processor (Snapdragon 800 and Snapdragon 801).
It was therefore believed that it had something to do with the different radio frequencies and LTE band support. I decided to take a closer look and recently I managed to get a hold of the Redmi 2 (2014813) Enhanced Edition. I started by downloading the latest fastboot ROMs available. Firstly I downloaded the fastboot ROM for the 2014813 model from Chinese MIUI webiste. This was version 6.5.2.0. I then dowloaded the latest Global fastboot ROM which was version 6.4.4.0 (as the 6.5.2.0 ROM hadnt been uploaded yet).
I extracted the TAR images fully and opened the flash scripts. In those I found the file corresponding to the cellular modem known as the NON-HLOS.bin. I thought that if I swapped the modem file from the Global ROM with the one in the 2014813 software, I would be able to successfully install the ROM via fastboot.
I tried it and it worked! I managed to get the ROM to fully install via fastboot on my Mac. I unplugged the device and set it up. Everything went through fine, even setting up my Google account. However the most important part to test was still left. The phone functionality. Did my modem swapping solution work?
I plugged in a T-Mobile SIM Card and straight away got HSPA+ signal! I tested with a telephone call and got crystal clear reception on both ends. I then turned off WiFi and tried the mobile data which worked fine. I have now tested every single part of the phone including Camera, Gyroscope, LED, Bluetooth, GPS, Compass and Loudspeaker. They are all working. The phone even shows 2GB RAM in the multitasking menu.
The only function not working is the OTA update. As the update zip will try to replace the modem, it will fail during installation. However this is very easy for Xiaomi to fix. All they need to do is provide a Global ROM for the 2014813 model with the correct modem which as seen is just a single file. They should easily be able to add a download link in each future update for the 2014813 model, both as fastboot/recovery packages and as an OTA zip. Hopefully they add this soon, especailly as more and more users are buying the Redmi 2 Enhanced Edition. Other than that everything else works.
i have flashed redmi2 prime using remix rom i am getting red screen on my phone please help me further
Hello guys.
I've been testing some roms and all 8.1 roms the fingerprint sensor to unlock the phone is much less precise compared to stock MIUI, failing 30% of the time.
I read that is a 8.1 issue and 7.1.2 was fast like stock.
Found some people complaining with the same issue.
This is something that a rom maintainer can fix?
Any workaround?
Thanks.
flasj miui oreo baseband.
https://androidfilehost.com/?fid=746163614322262750
wipe dalvik
Sent from my vince using XDA Labs
I have a leeco le max 2.. X820 version..I had just updated my phone into eui 5.9.023S(stable version).The update was going on well from the last month.But I woke up this morning and found that my fingerprint sensor is not working.I don't have much idea about flashing rom or something and I don't want to root my device also. Please give me a solution that works.
Thanks in advance:angel:
happens
I installed lineage as soon as I got the phone but then I wanted the stock camera and other things from official rom
so I flashed eui and tried to use it for a day ! the fingerprint sensor was not working properly
tried many things none worked only flashing modem worked for me so try to flash chinese or us modem
After restarting it again install all setup , when restore setup come , it's restart again and again,
This problem comes after restart REDMI NOTE3
AFTER FACING ALL PROBLEM I DONE RESTORE FACTORY RESET AND AGAIN REINSTALL THEN IT WORKS BUT AFTER RESTARTING I FACING ABOVE PROBLEM AGAIN
Please give me solution
1 st your posting in development thread which is not the right place for your query.
2nd Which device have you this is for Mediatek devices and there is not a Pie rom for them.
3rd Look at PE Thread and you would see it is a problem with the rom, flashing the VoLTE patch fixes it. Or wait for rom update.
Oh dear - you've done goofed up - Hennessey-based devices (Xiaomi Redmi Note 3 - MediaTek Edition) doesn't get anywhere near as much development as the Kenzo-Kate devices (Xiaomi Redmi Note 3 - Qualcomm Snapdragon 2GB/3GB RAM Editions), and Android Pie isn't even developed for the MediaTek version of the phone.
DS Kushwaha said:
Please give me solution
Click to expand...
Click to collapse
Don't go around asking for stuff, we don't get paid for this, you caused a problem, you're the one who needs to fix it, no one has any obligation to help.
That said, if you had read the thread instead of just downloading the ROM you'd have noticed tons of people with the same problem and all have been given the same solution, flash the VoLTE fix.
Also, you posted on the wrong forum, this one is for mediatek based devices.
Guys, don't mind to reply OP. This man doesn't know how to read properly
Sent from my TA-1004 using Tapatalk
Read this
https://forum.xda-developers.com/redmi-note-3/how-to/hello-t3859355
No you don't install Pixel Experience 9.0. It isn't available for this device (henessy).
If you have kenzo or kate, then you want the Xiaomi Redmi Note 3 [Snapdragon] forum.
Post this was a reply to, got deleted.
Hey everyone, I have the Indian variant of Redmi note 10 (mojito) 4/64.
I was using pixel experience for quite a long time, but after PE 12 I switched back to MIUI. It was working fine, then all of a sudden the phone switched off and started rebooting itself. Now it always crashes and reboots again and again on MIUI ROMs (both Stock and Modded). But it works perfectly on custom roms like AOSP based ones.(pixel os, PE+). I cant figure out what's causing this issue. but I get the same error even on MIUI 12.
Also, the stock camera app crashes in MIUI and macro camera just doesn't work at all.
Any idea why this is happening? Thanks
sazeedtaj said:
Hey everyone, I have the Indian variant of Redmi note 10 (mojito) 4/64.
I was using pixel experience for quite a long time, but after PE 12 I switched back to MIUI. It was working fine, then all of a sudden the phone switched off and started rebooting itself. Now it always crashes and reboots again and again on MIUI ROMs (both Stock and Modded). But it works perfectly on custom roms like AOSP based ones.(pixel os, PE+). I cant figure out what's causing this issue. but I get the same error even on MIUI 12.
Also, the stock camera app crashes in MIUI and macro camera just doesn't work at all.
Any idea why this is happening? Thanks
Click to expand...
Click to collapse
Try to flash latest fastboot image of your region using latest mi flash tool
x3r0.13urn said:
Try to flash latest fastboot image of your region using latest mi flash tool
Click to expand...
Click to collapse
Yes did that already. still no luck