Hey guys, I hope you remember me from the N-FUEL ROMS. As you must have seen the title, this thread is not about a ROM, or any GUIDE, it is a KERNEL. Fuel-Kernel focuses on extreme stability, amazing battery-life and great performance. I have been learning on kernel building for quite a time now, and this is the result of all my learnings. I will be learning more and updating this kernel frequently. Now, lets begin talking about kernel
SUPPORTED DEVICES
SM-N920C
SM-N920I
SM-N920G
SM-N920CD
SM-N920L
SM-N920K (Maybe)
SM-N9208
SM-N920T
SM-N920W8
FEATURES
-> PERMISSIVE KERNEL (Audio Mods should work now with SuperSU)
-> AROMA INSTALLER FOR DEVICE AND ROOT SELECTION
-> SAMSUNG ROOTING RESTRICTION FEATURE REMOVED
-> LOW IDLE FREQUENCY WHILE SLEEPING FOR BETTER BATTERY LIFE
-> REDUCED WAKELOCKS
-> CPU HOTPLUG ADDED FOR STOPPING CORES WHILE DEVICE SLEEPING
-> ENABLED ALL STOCK GOVERNORS
-> ADDED POWERSUSPEND AND DYNAMIC FSYNC
-> ADDED F2FS SUPPORT
-> ADDED TCP ALGORITHM
-> REDUCED KERNEL TIME TO SLEEP
-> GREAT BATTERY LIFE
-> SUPER STABLE (Not faced any random reboot as of now)
-> AND GREAT PERFORMANCE
Currently, due to initial version, the KERNEL only supports International Note 5 devices only, and if you find any issues or any other bugs with the kernel, feel free to report it, as this kernel is not perfect and will improve overtime with your precious reviews and support.
STEPS TO INSTALL
Step 1:-Download the zip and head to your Recovery.
Step 2:- Backup your data (optional)
Step 3:-Flash the FuelKernel-V2-FINAL-STABLE.zip. Make your selections and complete the AROMA installer
Step 4:- After the ROM boots, keep the device untouched for at least 5 minutes to let the kernel settle with the ROM and for better Kernel-Hardware Integration.
Step 5:- ENJOY.
CREDITS
-> Thanks @TheSickness for his amazing guide, from which I learned all this and made this kernel.
-> Thanks @TheFlash17 and @Tkkg1994 for their great support and helping me fix many bugs
-> Thanks @Ather for being so supportive, friendly, amazing friend and helping me fixing many major bugs.
-> Thanks @pelpa87, my great friend for testing this kernel.
-> Thanks @AI7777 and @jodybreeze82 for being my testers for N920T
IMPORTANT POINTS
1) Download Links and Addons will be in Post #4
2) Changelogs will be in Post #3
Kernel Source
XDA:DevDB Information
FUEL-KERNEL, Kernel for the Samsung Galaxy Note 5
Contributors
AndroidSword, @Tkkg1994, @TheFlash17, @Ather, @TheSickness
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2017-07-01
Created 2017-07-01
Last Updated 2017-08-27
Telegram group link:
https://t.me/joinchat/AAAAAEGSu4mykXwWSB3iPg
Kindly join my telegram group for faster communication...
CHANGELOGS
V2:-
-> Kernel built right from scratch and fixed all previous issues.
-> ADDED SUPPORT FOR CANADIAN/T-MOBILE NOTE 5 (N920W8/T) DEVICES
-> ADDED F2FS SUPPORT
-> ADDED POWERSUSPEND AND FSYNC SUPPORT
-> REDUCED KERNEL WAKELOCKS
-> ENABLE TCP CONGESTION ALGORITHMS
-> SELinux PERMISSIVE FIXED(All Audio Mods work now)
-> MAGISK AND SUPERSU ROOT OPTIONS IN AROMA
-> Magisk V13.3 Added
-> Amazing Deep Sleep, super smooth and highly stable..
V1:-
Initial release
DOWNLOAD LINKS
V2: https://www.androidfilehost.com/?fid=745425885120758241
V1: https://www.androidfilehost.com/?fid=745425885120745580
ROOT ADDONS
SuperSU Addon:- https://www.androidfilehost.com/?fid=817550096634783010
Magisk V12.0 Addon:- https://www.androidfilehost.com/?fid=673368273298968382
FIXES
Private Mode Fix:- https://www.androidfilehost.com/?fid=961840155545581613
Will there be G928f support?
Trilis said:
Will there be G928f support?
Click to expand...
Click to collapse
Not as of now, but in future versions there will be support for S6 Edge Plus devices as well...
SuoerSU can't be downloaded, saying the key is invalid, pls check.
Regards.
Thanks to custom kernel. Good luck. QE4 or QE2 which base?
nitol said:
SuoerSU can't be downloaded, saying the key is invalid, pls check.
Regards.
Click to expand...
Click to collapse
Thanks for reporting, reuploading to Android File Host
OttomanTR said:
Thanks to custom kernel. Good luck. QE4 or QE2 which base?
Click to expand...
Click to collapse
QE3
nitol said:
SuoerSU can't be downloaded, saying the key is invalid, pls check.
Regards.
Click to expand...
Click to collapse
Link has been changed... Sorry for inconvinience
AndroidSword said:
QE3
Click to expand...
Click to collapse
thanks to effort but not boot thanks. Khongloi rom.
OttomanTR said:
thanks to effort but not boot thanks. Khongloi rom.
Click to expand...
Click to collapse
Only for N5 Based ROM, built fully on my N-Fuel ROM, btw thanks for reporting, will add that in OP:good:
Aurorarom is N5 Based Rom,don't work. N920C
Sent from my SM-G9550 using XDA-Developers Legacy app
AndroidSword said:
Only for N5 Based ROM, built fully on my N-Fuel ROM, btw thanks for reporting, will add that in OP:good:
Click to expand...
Click to collapse
no verity opt encrypt. My case worked
my rom fuel 5
my device don't boot
تم الإرسال من SM-G955F باستخدام Tapatalk
Fuel kernel
Using Aurorarom v33 and all is working fine, no problem at all with this kernel .. !!
Been using this for a while now,i can say it has great performance, stability,and every feature that it claims,but i noticed that this kernel does not have deep sleep. Also a request,IF there is v2, could you pls add like a kernel control or smt?
I think there is something wrong with the zip file one of my friends is on your rom and told me that after flashing it restarted into recovery so i told him take out image and install from recovery then flash magisk it worked for him .
Then i try this method myself in port s8 rom it worked for me too .
I think you need to remake the zip file and add root ..
Thanks for the hard work ..
AndroidSword said:
Only for N5 Based ROM, built fully on my N-Fuel ROM, btw thanks for reporting, will add that in OP:good:
Click to expand...
Click to collapse
manngoooo9 said:
Aurorarom is N5 Based Rom,don't work. N920C
Click to expand...
Click to collapse
ahmedkna said:
my rom fuel 5
my device don't boot
تم الإرسال من SM-G955F باستخدام Tapatalk
Click to expand...
Click to collapse
smooz said:
I think there is something wrong with the zip file one of my friends is on your rom and told me that after flashing it restarted into recovery so i told him take out image and install from recovery then flash magisk it worked for him .
Then i try this method myself in port s8 rom it worked for me too .
I think you need to remake the zip file and add root ..
Thanks for the hard work ..
Click to expand...
Click to collapse
Guys, to clear things out, u need to install a root addon for the kernel to boot without ROOT addon, it wont work...
Amd secondly, it takes time for a new kernel to boot... it would not be na the case, that u install the kernel and then the device starts instantaneously... It will take at least 5 minutes to boot...
I have build this kernel on N920G while I was on N-Fuel V5, it booted, I tested all the zip files myself. And its not that it will work with my ROM. It should work with any other Note 5 based ROM...
Related
Simple, Stable, Smooth...
I am not a developer, I have learnt (and am still learning) many things from the immensely talented developers on this Forum.
This Rom has been created with the thought that there are many people who wish to continue with Samsung Stock Rom to give them a hassle-free use of their Smartphone, yet they need their Rom to be bloatfree, efficient and Smooth.
This ROM is rooted and deodexed for my daily use. Will try to keep the version updated as and when a new stock firmware (with higher/better changelog) is released for the Galaxy S5 (G900H) version.
Please do not expect me to customise this ROM any more than what it is. As I said I am not a Developer. Thanks for Understanding.
Only for G900H (Exonys Variant)
DISCLAIMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards. YOU are choosing to make these modifications on your phone and you are solely responsible for your actions.
Enjoy/Share the Rom and hit Thanks, if you like it.
Base Firmware (v9)
Model SM-G900H
Model name GALAXY S5
Country Iraq
Version Android 5.0
Changelist 5501496
Build date Wed, 29 Jul 2015 03:40:38 +0000
Product code MID
PDA G900HXXU1BOG6
CSC G900HOJV1BOG2
Features(Lite)
•Latest Firmware for G900H - BOG6
•Deodexed
•Zipaligned
•Rooted (Supersu 2.49)
•BusyBox
•Init.d scripts support
•Debloated
•Knox Fully Removed
Download link:
Zephyr Version 9 (Deodexed Version)
Zephyr_v9_Deodexed_BOG6
https://mega.nz/#F!lM4XSLwC!mgCUeSyThgLrPnB10orVtA
Size: 700 MB (Folder includes latest Bootloader and Modem, Please flash them after clean installing the rom first)
https://www.androidfilehost.com/?fid=24052804347798891
Size: 700.9 MB (md5: 098cde607a13d8c9d97bb96d965c11d1)
Androidfilehost
Modem - MDM10.tar.md5
https://www.androidfilehost.com/?fid=24052804347798889
Size: 15.3 MB (md5: d88375cbfdcebddc7f7105815defca4d)
Bootloader - BTL10.tar.md5
https://www.androidfilehost.com/?fid=24052804347798888
Size: 1.1 MB (md5: 4a723263afaa65cc9076a1371d085a56)
Add on Pack for Zephyr 9
Zephyr_v9_Addons_Deodexed.zip (112.4mb)
https://mega.nz/#!YJQXAQTQ!2OD7-fug8Xc5uo79vBw3xPdHoZ_0OAL6gwF7At0tDoo
Changelog v9 -
Lollipop
Deodexed (Fully ART) - A clean install is required for installing this rom
Installation Instructions:
- Make sure you install the BOG6 Bootloader/Modem (For more information check Post #2
- Copy the Zip to your Phone Memory (Check md5 checksum)
- Use Latest recovery - TWRP by @MOKIAAA recommended
- Backup your existing rom
- Format System
- Wipe Data
- Wipe Cache
- Wipe Dalvik Cache
- Install Rom
- Install Add-ons
- Reboot
- Enjoy
First Boot shall take a long time(At least 10-15 minutes)
Note :
Clean Install
Please take an EFS backup and a nandroid backup before installing.
Inspiration &Thanks to:
@sammobile @dsixda
@Yank555
@sotmax
@zoot1 @Lord Boeffla @Chainfire
@temasek @rovo89 @Perka @JustArchi (for his amazing ArchiKitchen)
@edgarf28
@amarullz for amazing tool Aroma
@svadev for his SVADeodexerForArt
@Nikhil & @RajatPatel for their incredible tool Android Flashable Zip Creator
And to all others who have helped me along the way...
BOOTLOADER/MODEM Package
Already included in the rom folder
Install Instructions:
" Source/credits: @edgarf28 "
For the latest version, would suggest you flash rom first(if you are already on Lollipop) via recovery. Flash Bootloader and Modem via odin after flashing the rom.
This procedure can be done anytime and it won't wipe anything from your device! Your current ROM, Kernel & Recovery will remain the same after you flash this.
Do exactly as mentioned:
- Make sure you have downloaded the correct packages
- Switch off your phone completely (This is IMPORTANT)
- Wait for 30 seconds
- Start your Phone in download mode: Press Vol down + Home + Power buttons till the screen turns on, press Vol Up to continue (Only enter download mode on this way, otherwise it won't work!!)
- Connect your phone to your computer
- Open Odin 3.09 on your PC (Older versions won't work correctly!)
- Click on the 'BL' button, and load in your BOOTLOADER tar.md5 file
- Click on the 'CP' button, and load in your MODEM tar.md5 file
- DON'T TOUCH ANYTHING ELSE (you can brick your phone if you choose other settings in Odin)
- Click on the Start button
- Wait till it finish flashing.
- Your phone reboots automatically after flashing.
- Always check after flashing: Settings -> About device -> Baseband; that should show you the same modem build number noted as here.
And also check if the bootloader got flashed correctly by downloading an AndroidTerminal app, and enter this command: getprop ro.boot.bootloader
NOTE: Sometimes the modem/baseband needs to be flashed 2 or even 3 times till it will get flashed correctly.
One more
Finally A Rom For G900H
Finally!!
please tell me selinux is permissive in this rom...or just tell me how to change selinux mod
mahir1010 said:
please tell me selinux is permissive in this rom...or just tell me how to change selinux mod
Click to expand...
Click to collapse
Selinux is not set to Permissive. You could try to change it with selinuxmodechanger_v1.2.apk from xda forum
manojpy said:
Selinux is not set to Permissive. You could try to change it with selinuxmodechanger_v1.2.apk from xda forum
Click to expand...
Click to collapse
first of all a big thanks to you for releasing outa new rom exclusively for octa core variant :good::good::good:
and second what can i do after changing selinux status will it give a performance boost or something ??
and third just asking as you have stated that it is deodexed then why is it 983 mb in size and not small like sterolite rom which is lik e450 mb in size
no offence just asking and i am not making any comparison
manojpy said:
Selinux is not set to Permissive. You could try to change it with selinuxmodechanger_v1.2.apk from xda forum
Click to expand...
Click to collapse
i know about that app i already tried it as it says in the description the app doesn't work with Samsung devices even if knox is removed but thats alright i cant complaint about it at least we have a rom now
---------- Post added at 07:40 PM ---------- Previous post was at 07:37 PM ----------
sharingan said:
first of all a big thanks to you for releasing outa new rom exclusively for octa core variant :good::good::good:
and second what can i do after changing selinux status will it give a performance boost or something ??
Click to expand...
Click to collapse
no it just helps running some root apps which doesn't work with selinux enforcing i don't know much about it
mahir1010 said:
i know about that app i already tried it as it says in the description the app doesn't work with Samsung devices even if knox is removed but thats alright i cant complaint about it at least we have a rom now
---------- Post added at 07:40 PM ---------- Previous post was at 07:37 PM ----------
no it just helps running some root apps which doesn't work with selinux enforcing i don't know much about it
Click to expand...
Click to collapse
thanks bro i get it now
sharingan said:
first of all a big thanks to you for releasing outa new rom exclusively for octa core variant :good::good::good:
and second what can i do after changing selinux status will it give a performance boost or something ??
and third just asking as you have stated that it is deodexed then why is it 983 mb in size and not small like sterolite rom which is lik e450 mb in size
no offence just asking and i am not making any comparison
Click to expand...
Click to collapse
I have not faced any root issue on the Selinux enforced mode. Device with knox security do face problem changing to Permissive. Am not qualified to try it too.
I was also using the rom you mentioned and he has done a wonderful job. Edgar's rom is bare bones with add on package. I feel the basic features that Samsung has given should be there and hence have removed only the absolute unnecessary files. Try it and let me know your views. No offence taken at all[emoji6]
manojpy said:
I have not faced any root issue on the Selinux enforced mode. Device with knox security do face problem changing to Permissive. Am not qualified to try it too.
I was also using the rom you mentioned and he has done a wonderful job. Edgar's rom is bare bones with add on package. I feel the basic features that Samsung has given should be there and hence have removed only the absolute unnecessary files. Try it and let me know your views. No offence taken at all[emoji6]
Click to expand...
Click to collapse
thanks bro
no doubt i wil try and post my review
once again i have to say nice work
:good::good::good:
Good Job mate :good::good::good:
Keep up the good work !!! :good::good::angel:
lucky_sidhu said:
Good Job mate :good::good::good:
Keep up the good work !!! :good::good::angel:
Click to expand...
Click to collapse
Thanks Paaji
Hi dude
nice job ... :good:
how did you removed knox ?
I guess you have downgraded bootloader or ...
1 - is there any way to flash that bootloader to a stock rom to remove knox ?
2 - is there any way to make knox 0 and dont remove it totally ?
(I tell that becase of this please read : http://forum.xda-developers.com/showthread.php?t=2740340&page=1)
Great work.....
Highly appreciated...:good:
and one more thing what are the changes you made in this ROM any improved battery life
and which Kernel and MOD's
one last thing try to port other ROM's feature in ya next update like AllianceROM or OMEGA ROM
if you need help regrading testing and debugging i can help you with it
you made G900H users proud
keep your work alive
Hello. Thank you for your rom, but it doesn't work for me ._. I did as you told in instructions. Used CWM and Philz wiped/formated and nothing, it just stucks on Samsung GALAXY S5 Powered by Android screen. I tried flashing couple of times, same result. And yes I got g900h model. Any help apretiated.
P.S. I checked md5sum, it's exact as in your post
safereg said:
Hi dude
nice job ... :good:
how did you removed knox ?
I guess you have downgraded bootloader or ...
1 - is there any way to flash that bootloader to a stock rom to remove knox ?
2 - is there any way to make knox 0 and dont remove it totally ?
(I tell that becase of this please read : http://forum.xda-developers.com/showthread.php?t=2740340&page=1)
Click to expand...
Click to collapse
Thanks. Knox has been removed while cooking the Rom itself (using Archikitchen).
No bootloader has not been downgraded. As of now once you trip knox it cannot be reset.
Sent from my SM-G900H using Tapatalk
Shindsu said:
Hello. Thank you for your rom, but it doesn't work for me ._. I did as you told in instructions. Used CWM and Philz wiped/formated and nothing, it just stucks on Samsung GALAXY S5 Powered by Android screen. I tried flashing couple of times, same result. And yes I got g900h model. Any help apretiated.
P.S. I checked md5sum, it's exact as in your post
Click to expand...
Click to collapse
Are you coming from NG3 to flash this rom. If not, please flash the Ng3 bootloader first using ODIN and then flash the zip (will add a note in OP). I have tested the installation process many times before uploading. Had no issues.
Sent from my SM-G900H using Tapatalk
9988338891 said:
Great work.....
Highly appreciated...:good:
and one more thing what are the changes you made in this ROM any improved battery life
and which Kernel and MOD's
one last thing try to port other ROM's feature in ya next update like AllianceROM or OMEGA ROM
if you need help regrading testing and debugging i can help you with it
you made G900H users proud
keep your work alive
Click to expand...
Click to collapse
Have not done any tweaking for battery but will definitely have better battery than stock I guess (let me know). Have only added the ad block feature. Cannot add features like alliance and Omega due to limited knowledge and also lack of time from work and personal life. You are free to use this as a base (credit will be appreciated) and take it to next level. I am offering my services as a tester. [emoji4]
Sent from my SM-G900H using Tapatalk
thanku
a heartly thanks to u dear @manojpy for ur great jobbb i wana try ur rom:good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::fingers-crossed:
---------- Post added at 10:14 AM ---------- Previous post was at 09:46 AM ----------
plzzzz!!! add call recording in call screen
Full Stock A8 Deodex Rom
Rom Is For S6 And S6 Edge Users
Model Support
1 SM G920 i/f
2 SM G925 i/F
3 Other Model Don't know You Can Give it Try.
I'm Presenting A8 Full DeoDex Rom
Special Thanks To @ambasadii For give this rom as Base for s6 and s6 edge user
Quote(What's inside)
☆Android: 6.0.1 (Official) - based on A810FXXU1API7 firmware!
★ ROM security patch level: 2016-09-01
★ ROM contains only 100% original stock files (no modded APK, Framework & Lib files)
★ S6 Kernel (ramdisk modified)
★ Stock S6 Edge Camera (100% working)
★ Fully GraceUX Experience
★ Fully Deodex Version
★ Fully Ported A8 Apps
★ Fully Ported A8 Framework
★ Fully Ported A8 SystemUI
★ Fully Ported A8 Settings
★ Adblock Host
★ 101 Fonts
★ AppLock Support
★ S-View Cover Support
★ Many CSC Features like: call recording, receive MMS without mobile data on, support recent app protection, LTE data icon instead of 4G, and more...
★ Multi-Languages System
★ Removed Knox And Fota Client
★ Fstrim Command On Every Boot
★ Logs Cleaner On Every Boot
★ Sqlite Optimization On Every Boot
★ Latest SuperSu v2.78
★ Latest Busybox v1.25.1
★ Latest Sqlite3 v3.12.1
Rom Download Link :
https://mega.nz/#!lJQ0UbKJ!tPK1Azpb73Wh811Z-DWQg73v3nUL-Ay4oGtdiPSCNlg
Google Drive Link : https://drive.google.com/file/d/0B6CJegVLkEPdZlQtQ2pFbFluclE/view?usp=sharing
Not Working On my Rom is
* blue light filter
* resolution changing option
* v-gear support
* crying baby sound detector
All this Features dont have A8 So Cant Port.
Flashing Guide Read Carefully After Flash
Download Rom And Put in SD Card
Reboot To Recovery
Wipe Data ( Need Clean Installation For Better Result)
select A8 Port Rom Zip
Flash it
No Kernel Inside (Flash Your Custom Kernel For Your Model)
Flash SuperSu
Reboot And Be Patient For 10 Minutes for Boot Up
Enjoy.( ReFlash Rom Can Wipe Your Data Be careFull For What You're Doing)
Stable Rom Date : Sun,13 November
Thank You Section1 Thank You To All Users ( For Support)
2 Thank You @Chainfire (For supersu)
3 Thank You to All Dev (For port Kernel)
4 others Dev ( For respect them Work )
5 sorry If I Forget to mention anyone.
CREDIT
It's Me Sugar (@bunty_parona)
Joseph Adam (My Brother For Hard Work and make it Possible)
Mr Hai (@haifish9999 For Aod Brightness Fix And Help Me for Port)
Alexis (@Alexisxda For inspiration And Guide)
Yaseen (@zyasin for testing Rom and Help to make rom Mirror)
To All S6 And S6 edge User Thank You..
I Hope Guys You Like My Work..
If You Have Any Trouble Come Join Us on My Group
All are friendly To help EachOther
https://telegram.me/joinchat/CaccS0FaRRqAIH4jE0Sk4Q
ONCE AGAIN THANK YOU AND SORRY For Last Thread Trouble..:fingers-crossed:
Welcome back!!!
Enviado desde mi G-2PW2100 mediante Tapatalk
---------- Post added at 12:46 PM ---------- Previous post was at 12:45 PM ----------
Now what kernel you use by default in the rom?
Enviado desde mi G-2PW2100 mediante Tapatalk
jong84 said:
Welcome back!!!
Enviado desde mi G-2PW2100 mediante Tapatalk
---------- Post added at 12:46 PM ---------- Previous post was at 12:45 PM ----------
Now what kernel you use by default in the rom?
Enviado desde mi G-2PW2100 mediante Tapatalk
Click to expand...
Click to collapse
No kernel Inside You Have To Flash Custom Port Kernel.? sorry for Trouble Sir.
Great rom! Is it possible to get center cloc k and 3 minit battery?
Sent from my SM-A810F using XDA-Developers mobile app
TommiP77 said:
Great rom! Is it possible to get center cloc k and 3 minit battery?
Sent from my SM-A810F using XDA-Developers mobile app
Click to expand...
Click to collapse
Still i didnt have but You have To wait For it while i have time i will Do it.
Blue filter available?
Sent from my SM-N930F using XDA-Developers mobile app
Titosilva said:
Blue filter available?
Sent from my SM-N930F using XDA-Developers mobile app
Click to expand...
Click to collapse
NO
Great work, tried your rom with the restricted kernel tn (from previous thread), and so far working great. One question please to make sure before turning on encryption. Do you think encryption will work normally without any problem if turned on ?
tarekkkkk said:
Great work, tried your rom with the restricted kernel tn (from previous thread), and so far working great. One question please to make sure before turning on encryption. Do you think encryption will work normally without any problem if turned on ?
Click to expand...
Click to collapse
Now, I'm not 100% or even 75% on this, but I believe I read somewhere for encryption to work properly you need to use a stock kernel or not be rooted? If not setup correctly on reboot, it wouldn't start and go into a bootloop.
Like I said, not positive, just putting that out there so can be aware there may be some further research needed before attempting.
Good luck and for future users benefit, if you find info or do get it working, just post a quick reply here so others can gain from you work!
Which kernel can be used. Tried arter v.22 which doesn't boot....
stangdriver44 said:
Now, I'm not 100% or even 75% on this, but I believe I read somewhere for encryption to work properly you need to use a stock kernel or not be rooted? If not setup correctly on reboot, it wouldn't start and go into a bootloop.
Like I said, not positive, just putting that out there so can be aware there may be some further research needed before attempting.
Good luck and for future users benefit, if you find info or do get it working, just post a quick reply here so others can gain from you work!
Click to expand...
Click to collapse
Just turned encryption on, since I depends on it for security in case phone Lost. The good news it rebooted just fine and encryption is working without any problem.
Rom:this Rom
Kernel:tn2009 2.1
Mods: xposed (apm+; bootmanager; gravitybox;whatsapp extensions; xtouchwiz) + viper + supers 2.78sr3 + adblock
Encryption: working
Thanks @op
foeti said:
Which kernel can be used. Tried arter v.22 which doesn't boot....
Click to expand...
Click to collapse
Arter v22 for note 7 port
Arter97.com u can find all work
tarekkkkk said:
Just turned encryption on, since I depends on it for security in case phone Lost. The good news it rebooted just fine and encryption is working without any problem.
Rom:this Rom
Kernel:tn2009 2.1
Mods: xposed (apm+; bootmanager; gravitybox;whatsapp extensions; xtouchwiz) + viper + supers 2.78sr3 + adblock
Encryption: working
Thanks @op
Click to expand...
Click to collapse
I didnt ever try that thing and no idea about it. M sorry ..
stangdriver44 said:
Now, I'm not 100% or even 75% on this, but I believe I read somewhere for encryption to work properly you need to use a stock kernel or not be rooted? If not setup correctly on reboot, it wouldn't start and go into a bootloop.
Like I said, not positive, just putting that out there so can be aware there may be some further research needed before attempting.
Good luck and for future users benefit, if you find info or do get it working, just post a quick reply here so others can gain from you work!
Click to expand...
Click to collapse
Thank u for replying and make us understand.
Really good Rom! Good batterylife an fast as hell.
fattony83 said:
Really good Rom! Good batterylife an fast as hell.
Click to expand...
Click to collapse
Thank u so much for lovely feedback
Next build ia more powerful than this
Hi! Excellent rom, mate! Just one question...Is your rom compatible with AlixisXDA sound booster?
Sent from my SM-A810F using XDA-Developers mobile app
raphaelrossi6 said:
Hi! Excellent rom, mate! Just one question...Is your rom compatible with AlixisXDA sound booster?
Click to expand...
Click to collapse
I didnt try but u can give it try
But backup ur system 1st
Otherwise reflash rom make ur wipe data and u lost applications and i dont want this thing happn to u
I recommend to use viper its best u can see here viper setting mine screenshotare there
http://forum.xda-developers.com/galaxy-s6/development/a8-fast-stable-rom-v2-smooth-amazing-t3498398
@bunty_parona thank you mate for the quick reply...i will do this later and post the result here. Thank you!
Sent from my SM-A810F using XDA-Developers mobile app
raphaelrossi6 said:
@bunty_parona thank you mate for the quick reply...i will do this later and post the result here. Thank you!
Click to expand...
Click to collapse
Ok sure.
This is a stock rom that is debloated , deodexed and rooted. It is for C9LTECHN (SM-C9000). Just flash in twrp and reboot.
Marshmallow Android 6.0.1
C9000ZHU1AQK1_DeOdex: https://www.androidfilehost.com/?fid=745849072291690211
Kernel V3.3.1: https://www.androidfilehost.com/?fid=817906626617944696
Xposed Framework: https://www.androidfilehost.com/?fid=673368273298981051 and https://www.androidfilehost.com/?fid=745425885120757828
If you want to go back to stock QK1 kernel https://www.androidfilehost.com/?fid=817906626617948244
Rom Bugs:
Fingerprint - Only if a custom kernel is installed.
Kernel Features:
Installs SuperSU
Permissive
Added IO BFQ Scheduler
Disabled DM_VERITY
Disabled Forced File Encryption
Disabled KNOX
Disabled TIMA
Disabled RKP
Disabled KAP
Disabled Secure Storage
Enabled CIFS Filesystem Support
Enabled NFS Filesystem Support
Enabled NTFS Support
Increase Battery Charging Levels
Fsync Toggle (Enable/Disable)
Wifi driver updated to LA.BR.1.3.6_rb1.22
Kernel Patched up to 3.10.107
Mild undervolt for our cpu and gpu
Use all cores to boot
CVE Patches updated as of Oct/2017
Kernel source and change-log: https://github.com/travismills82/c9lte-kernel/tree/Touchwiz-Marshmallow
Modem and Bootloader C9000ZHU1AQK1: https://www.androidfilehost.com/?fid=962021903579496076
In case wifi is not enabling unpack modem and bootloader and flash via Odin.
Clean rom, excellent choice of debloat apps.
Thanks
Sent from my SM-T719 using XDA-Developers Legacy app
kernel booting now working on permissive and fixing wifi Than we can get down to cve patching and overall features and improvements. :good:
travis82 said:
kernel booting now working on permissive and fixing wifi Than we can get down to cve patching and overall features and improvements. :good:
Click to expand...
Click to collapse
WOW! finally a decent rom + great developer for C9 PRO
Cheers everyone! thank you @travis82
@travis82
Great job indeed..actually I'm a c900f (indian varient ) owner but still feeling happy ..
Sir can you make a debloated rom for our varient or atleast guide which apps can be removed without breaking the functionality of rom..i just use screen mirroring out of samsung rom's features
Congratulations on your development..
Sent from my SM-C900F using XDA-Developers Legacy app
---------- Post added at 09:38 PM ---------- Previous post was at 09:37 PM ----------
aftermath85 said:
WOW! finally a decent rom + great developer for C9 PRO
Cheers everyone! thank you @travis82
Click to expand...
Click to collapse
Are you using c9000 or c900f ? Is this rom flashable on our c900f ?
Sent from my SM-C900F using XDA-Developers Legacy app
Awesome
I flashed this rom. believe it is beyond what is said about it. It is absolutely amazing. everything works perfectlyyyyyyy
---------- Post added at 05:37 PM ---------- Previous post was at 05:15 PM ----------
I flashed this rom. believe it is beyond what is said about it. It is absolutely amazing. everything works perfectlyyyyyyy
Great thank you very much
travis82 said:
This is a stock rom that is debloated rooted. It is for C9LTECHN (SM-C9000). Just flash in twrp and reboot. Done.
Download link: https://www.androidfilehost.com/?fid=745425885120752723
Click to expand...
Click to collapse
Great work please make volte support thank you :good::good::good::good::good:
volte works for me. It doesn't work on your SM-C9000? Also if there are any experienced developers I want help with LineageOS. So get a hold of me if you have experience with AOSP developing. I don't want to be solo again like on S7 Edge. It was very exhausting and one of the main reasons I switched phones.
i can not mount data, i am using the latest twrp you @travis82 have posted,
is it ok to flash this rom without wipe? thanks
aftermath85 said:
i can not mount data, i am using the latest twrp you @travis82 have posted,
is it ok to flash this rom without wipe? thanks
Click to expand...
Click to collapse
can't mount data cuz you need to format data. TWRP doesnt support samsung encryption currently. So you HAVE to format data to unencrypt.
Format data, install dm variety, reboot to recovery, install rom
ROM COOK
rom development is easy but solving bugs is like taking a climb to mountain kilmanjero
aftermath85 said:
WOW! finally a decent rom + great developer for C9 PRO
Cheers everyone! thank you @travis82
Click to expand...
Click to collapse
Well I have kernel and recovery building in lineage OS 14.1. System is next. Code is uploaded to my GIT so anyone with experience feel free to help out.
travis82 said:
can't mount data cuz you need to format data. TWRP doesnt support samsung encryption currently. So you HAVE to format data to unencrypt.
Click to expand...
Click to collapse
I see, thanks! I already flashed the rom, its awesome!!!
I have the encryption setup but i have to debug to make sure its picking up drm and maybe update the files in twrp for encryption. I'll get to it eventually its not on my important list currently.
Screen on time what are you guys getting vs 100% stock?
Mobile hotspot won't turn on anymore after flashing this ROM.
I've already tried wiping cache and network settings reset.
travis82 said:
Screen on time what are you guys getting vs 100% stock?
Click to expand...
Click to collapse
Will observe, but definitely this ROM is much better than the 100% stock.. even when sleep it does not drain much.
Lineage tree build-able now
Well I said I would do it. Now if OTHER devs from the indian variant would actually chip in and help and not WATCH.... hint hint dev you know who I am talking about, progress would be crazy fast. So you guys owning indian variant I suggest you get on to the other devs to help out.
Dinner time so see ya all later.
Thanks for develop this rom and well done.
Thank you very much for developing this rom. It is awesome. However, the wifi is not working. May I know how to fix it?
A810F Full Odex Port S6_S6 Edge
Some information you should know..
This is a full A8 2016 [ SM-A810F ] firmware port with android version 7.0[NRD90M_A810FXXU1BQJ1]
If you want to report a Bug, provide a logCat with detailed explanation
Please Read the instructions and the F.A.Q Before installing the rom.
You are not allowed to use this base without asking for permission prior to release..
Any sort of File Kanging will be reported without hesitation, we know our codes.
If you like this rom, Hit the Thanks button, and consider a donation
ROM IS FULL ODEX
So fast Experience without Any lag
And lots of tweaks and optimizing in This rom
Port Features :-
2018-03-01 March Security Patch
Based on SK TELECOM firmware
SKC csc included (With this u get limited service but after changes CSC or flash any CSC you can Use mobile Data i
didnt change CSC because it has some features)
Pure A8 libs without any edit
VoLTE also fixed (Flash INS USER volte fix)
Call Issued Also Fixed
Dual apps Included
All apps updated
Stock S6 camera (No Bug)
Lots of improvement
Better battery Thn last A8 Odex
Changelog Of New SM-A810S/F
Android OS drain fixed
Device Idle fixed
Fingerprint fixed
3rd Cpu always high freq. Fixed
New Rebased Rom
Full Optimizing with great deep sleep.
And new more too**
Changelog OF New A810F 28/5/2018
Rebased Whole rom with November firmware
S9 Oreo Emoji
Oreo KeyBoard Added
SPowerPlanning Added(Not Confirm Work Or Not)
init.d Tweaks
New Framework With Mods
CSC Tweaks Added
Default CSC Is INS with VoLTE
Call Issue Fixed
GPS FIxed
Galaxy App Store Fixed
3rd CPU fix awake
Auto brightness fix
App lock fix
Fix late Awakening screen (Some User face that)
Fingerprint fixed(dont register while setup just setup all things reboot and register FP else. Not working)
Added default theme Pix Ui V2
After boot just flash Pix Ui Mod for black theme.
Pos22 Kernel is really great with this rom i personally tried
Other Things Try And know..
New Rom Deodex Rom By @lukasb06
Installation Steps
Boot the phone into Recovery Mode
Do a FULL wipe: Dalvik Cache, Cache, Data, System even if coming from a port rom
Flash The Rom And Flash Kernel and Magisk and Reboot
The first boot may take 5 min
Old A810S Download : Mega
New 14-May-2018 Download : Mega
New 28-May-2018 Odex Download : Mega
New 28-May-2018 Deodex Download : Mega
Join For Support : Telegram
If You Want Black Ui Mod Then Flash This File For Full Black Mod [Remember After Boot You Have To Flash This File]
Here is URL(Screenshot Are Attracted Below) : PixUiMod
Credits :-
Bunty_parona
Joseph Adam
Enes
Prashant
Parth
MrHai
Anan
Ridwan
Shivam
Arianoxx
And
My Universal team.
If i forgot someone please PM me.
XDA:DevDB Information
A810S FULL ODEX PORT,
ROM for the Samsung Galaxy S6/S6 Edge
Contributors
@bunty_parona
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Current Stable Version: v1
Created 2018-05-06
Last Updated 2018-05-06
After uploading the rom during startup, the phone returns to recovery and does not start.
Is this rom support AOD ?
manix1960 said:
After uploading the rom during startup, the phone returns to recovery and does not start.
Click to expand...
Click to collapse
Flash latest magisk it will boot..
iamkani said:
Is this rom support AOD ?
Click to expand...
Click to collapse
Sure
Great work bro!!!
Cant enter ur telegram group , said its blocked cause of porn content !!!
Sent from my SM-G955F using XDA-Developers Legacy app
yes it has issue with some county server u can join as well this new
https://t.me/joinchat/BthXKUet8Jrurq-4G-OdWg
ahmadfatafta said:
Cant enter ur telegram group , said its blocked cause of porn content !!!
Sent from my SM-G955F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Shivam_m98s said:
Great work bro!!!
Click to expand...
Click to collapse
Thank u bro..
AOD for me not working, someone else got this Problem?
It's smooth.?
samadhi23 said:
AOD for me not working, someone else got this Problem?
Click to expand...
Click to collapse
Use custom kernel that support AOD
So Called Engineer said:
It's smooth.
Click to expand...
Click to collapse
Thank u
Work on g920s ?
G920T no audio. Neither me or the other guy could hear each other
jouvarider said:
Work on g920s ?
Click to expand...
Click to collapse
Try it with backup
rydoginator said:
G920T no audio. Neither me or the other guy could hear each other
Click to expand...
Click to collapse
Flash T mobile call Audio fix
Is this a new release from May 14?
Maps and other gps apps not working correctly.
bunty_parona said:
Flash T mobile call Audio fix
Click to expand...
Click to collapse
This one? if so, then it won't boot after flashing..
Hi all. Im here with my new work "moonLight Kernel"
Firstly thanks to @duki994
Pure stock kernel with great features.
Kernel Features:
- Based on latest Stock Kernel Source
- Linux 3.10.9
- Default 2100 mA Fast Charge
- Brighter Notification Leds and Fade Effect
- Selinux Permissive
- Great RAM management, performance and battery balanced, same as Stock Kernel
This version is for Stock, Stock Based, S7, S5 Neo Port Roms and GraceUX Roms
"Note to developers: About adding features or governors, all helps are accepted."
DOWNLOAD
Instructions:
-Download the boot img
-Go twrp
-Choose the folder which is the boot.img's place you downloaded
-Click flash image button
-Then chose boot.img and flash it.
-If you want root, you can use magisk or supersu
-Then reboot
Kernel Source:
https://github.com/cnkzlyr/moonlight_k3gxx_kernel
Credits:
Thanks to my team TeamExyKings
and @duki994 @cıyanogen @somadsul @yash92duster
and
Samsung
Google
Microsoft Azure
Does this kernel in the m&c air rom work?
titan2142 said:
Does this kernel in the m&c air rom work?
Click to expand...
Click to collapse
Sure
cnkzlyr said:
Hi all. Im here with my new work "moonLight Kernel"
Firstly thanks to @duki994
Pure stock kernel with great features.
Kernel Features:
- Based on latest Stock Kernel Source
- Linux 3.10.9
- Default 2100 mA Fast Charge
- Brighter Notification Leds and Fade Effect
- Selinux Permissive
- Great RAM management, performance and battery balanced, same as Stock Kernel
This version is for Stock, Stock Based, S7 and S5 Neo Port Roms. I may make versions for my AOSP other Touchwiz Roms later.
"Note to developers: About adding features or governors, all helps are accepted."
Download Link:
https://androidfilehost.com/?w=files&flid=300131
Ignore version on androidfilehost folder name. It is v3.
Instructions:
-Download the boot img
-Go twrp
-Choose the folder which is the boot.img's place you downloaded
-Click flash image button
-Then chose boot.img and flash it.
-If you want root, you can use magisk or supersu
-Then reboot
Kernel Source:
https://github.com/cnkzlyr/moonlight_k3gxx_kernel
Credits:
Thanks to my team TeamExyKings
and @[email protected]ı[email protected]@yash92duster
and
Samsung
Google
Microsoft Azure
Click to expand...
Click to collapse
Thx, great.. but..... I think i'll wait for AOSP version, dev @cnkzlyr
Honestly, im still enjoying your ViperOS until today..
never gonna back to stock anymore since i've been bitten by that viper ?
gandyprakoso said:
Thx, great.. but..... I think i'll wait for AOSP version, dev @cnkzlyr
Honestly, im still enjoying your ViperOS until today..
never gonna back to stock anymore since i've been bitten by that viper ?
Click to expand...
Click to collapse
:good:
Waiting for AOSP,still in viper os!:laugh:
widowhunter46 said:
Waiting for AOSP,still in viper os!:laugh:
Click to expand...
Click to collapse
??
COME HERE FOR S5 EXYNOS
t.me/TeamExyKings_5422
cnkzlyr said:
Hi all. Im here with my new work "moonLight Kernel"
Firstly thanks to @duki994
Pure stock kernel with great features.
Kernel Features:
- Based on latest Stock Kernel Source
- Linux 3.10.9
- Default 2100 mA Fast Charge
- Brighter Notification Leds and Fade Effect
- Selinux Permissive
- Great RAM management, performance and battery balanced, same as Stock Kernel
This version is for Stock, Stock Based, S7 and S5 Neo Port Roms. I may make versions for my AOSP other Touchwiz Roms later.
"Note to developers: About adding features or governors, all helps are accepted."
Download Link:
https://androidfilehost.com/?w=files&flid=300131
Ignore version on androidfilehost folder name. It is v3.
Instructions:
-Download the boot img
-Go twrp
-Choose the folder which is the boot.img's place you downloaded
-Click flash image button
-Then chose boot.img and flash it.
-If you want root, you can use magisk or supersu
-Then reboot
Kernel Source:
https://github.com/cnkzlyr/moonlight_k3gxx_kernel
Credits:
Thanks to my team TeamExyKings
and @duki994 @cıyanogen @somadsul @yash92duster
and
Samsung
Google
Microsoft Azure
Click to expand...
Click to collapse
@cnkzlyr
Congratz on new project !
Hi @cnkzlyr, my phone keep forget wifi password after every times I restart my phone and stock Samsung Smart Manager app keep saying illegal modify detected and request for restart after I flashed your Moonlight kernel v3 on Stock ROM. Any ideas for fixing that. Thanks
Wings1995 said:
Hi @cnkzlyr, my phone keep forget wifi password after every times I restart my phone and stock Samsung Smart Manager app keep saying illegal modify detected and request for restart after I flashed your Moonlight kernel v3 on Stock ROM. Any ideas for fixing that. Thanks
Click to expand...
Click to collapse
Easy. Modify build.prop change line ro.securestorage.support=true to ro.securestorage.support=false
Ignore about smart manager. Not a problem
Wings1995 said:
Hi @cnkzlyr, my phone keep forget wifi password after every times I restart my phone and stock Samsung Smart Manager app keep saying illegal modify detected and request for restart after I flashed your Moonlight kernel v3 on Stock ROM. Any ideas for fixing that. Thanks
Click to expand...
Click to collapse
Edit line on build prop editor, if im right search ro.securestorage(i forgot what line but its says like secure storage something like that and change true to false. And about smart manager yes its say illegal modify cause smart manager detect knox on samsung when knox is remove some samsung stock app wont be run perfectly,it just my opinion,try clean master is same as smart manager
widowhunter46 said:
Edit line on build prop editor, if im right search ro.securestorage(i forgot what line but its says like secure storage something like that and change true to false. And about smart manager yes its say illegal modify cause smart manager detect knox on samsung when knox is remove some samsung stock app wont be run perfectly,it just my opinion,try clean master is same as smart manager
Click to expand...
Click to collapse
Smart manager is a stock app so I assume we could not get rid of it but it just asking again and again for restart. Very annoying. So how can I turn off its warning or could you show me how to get rid of the app itselfs
Wings1995 said:
Smart manager is a stock app so I assume we could not get rid of it but it just asking again and again for restart. Very annoying. So how can I turn off its warning or could you show me how to get rid of the app itselfs
Click to expand...
Click to collapse
Uninstall it
widowhunter46 said:
Uninstall it
Click to expand...
Click to collapse
Install. Links please!
Монтано said:
Install. Links please!
Click to expand...
Click to collapse
too much vodka or something man?? ??
*The link is on the 1st page
gandyprakoso said:
too much vodka or something man?? ??
*The link is on the 1st page
Click to expand...
Click to collapse
V2 link
---------- Post added at 10:53 AM ---------- Previous post was at 10:53 AM ----------
gandyprakoso said:
too much vodka or something man?? ??
*The link is on the 1st page
Click to expand...
Click to collapse
Need v3 !
Монтано said:
V2 link
---------- Post added at 10:53 AM ---------- Previous post was at 10:53 AM ----------
Need v3 !
Click to expand...
Click to collapse
I need V4
Next?
?
gandyprakoso said:
I need V4
Next?
?
Click to expand...
Click to collapse
Give v3
Монтано said:
Give v3
Click to expand...
Click to collapse
Read description on first page, carefully.. you can translate it with google translate if you dont really understand what it means.. and dont drink too much vodka.. ??