Related
from
http://forum.xda-developers.com/showthread.php?p=26199933
I already dl the gsmfix.zip file but I don't know how to flash it.
thx
gabox99 said:
from
http://forum.xda-developers.com/showthread.php?p=26199933
I already dl the gsmfix.zip file but I don't know how to flash it.
thx
Click to expand...
Click to collapse
Flash in recovery. You need Amon Ra installed or any other recovery like TWRP or CWM. Boot into recovery and choose zip from SD.
zac41189 said:
Flash in recovery. You need Amon Ra installed or any other recovery like TWRP or CWM. Boot into recovery and choose zip from SD.
Click to expand...
Click to collapse
thx
now the phone gets stuck in the
white screen
with the words
htc one
p.d.
my ROM is BAMF-33112-RELEASE-KEYS.zip
don't flash gsmfix.zip there. that is only for sense 4 ROM developed by Joel.
On the same page of download link you can find stockgsmfix.zip, try to flash that as bamf-33112-release-keys.zip is based on sense 3.6. hope this helps you!
kancherlapraneeth said:
don't flash gsmfix.zip there. that is only for sense 4 ROM developed by Joel.
On the same page of download link you can find stockgsmfix.zip, try to flash that as bamf-33112-release-keys.zip is based on sense 3.6. hope this helps you!
Click to expand...
Click to collapse
I flash stockgsmfix.zip and the phone still gets stuck in the white screen
with the words htc one
It should work. anyway you are running BAMF sense 3.6 ROM right?
IF that is the case , do clean wipe, flash ROM again, change below values in /system/build.prop file using any editor and reboot once( better do factory reset )
ro.config.lte=false
ro.telephony.default_network=3
kancherlapraneeth said:
It should work. anyway you are running BAMF sense 3.6 ROM right?
IF that is the case , do clean wipe, flash ROM again, change below values in /system/build.prop file using any editor and reboot once( better do factory reset )
ro.config.lte=false
ro.telephony.default_network=3
Click to expand...
Click to collapse
ro.config.lte=false
ro.telephony.default_network=3
I made those changes inside the BAMF-33112-RELEASE-KEYS.zip file and save it
I did the steps and the same, gets stuck after reboot
in the white htc screen.
were you able to boot atleast once? if you are s-on you need extract boot.img (kernel) and need to flash it via fastboot usb ( fastboot flash boot boot.img)
below are steps
- extract boot.img from your downloaded zip file
- place it in android-sdk/platform tools folder- you will have fastboot executable there ( need to have android sdk and HTC driver installed on your pc)
- open command prompt ( right click on cmd -> run ad admin) and navigate to platform-tools folder
- reboot your phone to booltloader and select fastboot
- run command "fastboot flash boot boot.img"
- reboot the phone
If a flashable boot,img is provided in BAMF thread you can just flash it via bootloader
kancherlapraneeth said:
were you able to boot atleast once? if you are s-on you need extract boot.img (kernel) and need to flash it via fastboot usb ( fastboot flash boot boot.img)
below are steps
- extract boot.img from your downloaded zip file
- place it in android-sdk/platform tools folder- you will have fastboot executable there ( need to have android sdk and HTC driver installed on your pc)
- open command prompt ( right click on cmd -> run ad admin) and navigate to platform-tools folder
- reboot your phone to booltloader and select fastboot
- run command "fastboot flash boot boot.img"
- reboot the phone
If a flashable boot,img is provided in BAMF thread you can just flash it via bootloader
Click to expand...
Click to collapse
I extract boot.img from PH98IMGnewfirmwarepeople.zip
I did it and the same, it gets stuck in white HTC screen.
Extract boot.img from your downloaded rom zip file and flash
Sent from my PI86100 using Board Express
gabox99 said:
I extract boot.img from PH98IMGnewfirmwarepeople.zip
I did it and the same, it gets stuck in white HTC screen.
Click to expand...
Click to collapse
the issue is with the STOCKGSMFIX.zip, it seems doesn't work with
BAMF-33112-RELEASE-KEYS ROM
dont flash that. just change the build.prop values and flash ROM and boot.img. that should be good enough!
kancherlapraneeth said:
dont flash that. just change the build.prop values and flash ROM and boot.img. that should be good enough!
Click to expand...
Click to collapse
Finally!
It works!
I can send SMS!
thank you!
My custom build of Lollipop for Desire 820 single/dual sim (MSM chipset) devices.
Description of the build:
- Android Lollipop 5.0.2
- Fully rooted
- Modified boot image (boot.img)
- Custom boot animation
- Added busybox
- USB Debuging Enabled (by default)
- Some HTC tools removed (sorry, I never use them)
- Virtual SDCARD (/sdcard) unformated
- Multi-language support (including Indic)
- Added init.d script support
- SD card Permissions (extSD can read/write);
- Advertisement blocking (by hosts file)
- GPS Enhancement
- and many more
Requirements:
- Custom Recovery (i.e. TWRP)
- MSM based single/dual sim device
How to Install:
Kitkat based device:
You must flash Lollipop firmware (firmware.zip) before installing this rom. Please note, flashing Lollipop firmware is irreversible.
- Make sure that you have adb / naked adb driver installed in your computer
- Lock / relock the bootloader (re-unlock before rom installation)
- Boot the device in Bootloader and flash firmware.zip
Code:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot reboot
- Now, flash TWRP recovery
- Reboot into TWRP recovery
Lollipop based device:
- Flash TWRP recovery
- Reboot into TWRP recovery
Download all parts of the rom and use Winrar to merge/extract them.
Copy the Rom to your device under a folder of your sdcard/ext-sd. Reboot your device in recovery. Then, touch Install and select the file. Follow on-screen instructions.
How to write to system partition?
Make sure that you have adb / naked adb driver installed in your computer. Enter adb shell in command prompt. Then, following command into android console:
Code:
su
mount -o remount,rw /system
Notice: I'll not take any responsibility if you brick your device.
Download:
https://drive.google.com/folderview?id=0BxNlt7tBriTPSDVqTHgyV3FyMWM&usp=sharing
really awesome job love you dear
waiting for download link
modified boot ? is it able to system write ??
or need s off too ???
Waiting your awesome work
Wow. I need this ROM
Nice mate, waiting for that!
Please note, flashing Lollipop firmware is revertible.
Click to expand...
Click to collapse
You mean it's irreversible!
cr3h said:
Nice mate, waiting for that!
You mean it's irreversible!
Click to expand...
Click to collapse
yep. typo error.
download link provided...
Sir..,
Can you provide custom kernal with system
Writeable for d820 dual sim lolipop5.0.2
sandeep saxena said:
Sir..,
Can you provide custom kernal with system
Writeable for d820 dual sim lolipop5.0.2
Click to expand...
Click to collapse
Single sim kernel dual sim should be able to use!
I installed it. Great job!
tomal said:
My custom build of Lollipop for Desire 820 single sim (MSM chipset) devices. I'll try to provide the same for dual sim devices, but it may take some time.
Description of the build:
- Android Lollipop 5.0.2
- Fully rooted
- Modified boot image (boot.img)
- Custom boot animation
- Added busybox
- USB Debuging Enabled (by default)
- Some HTC tools removed (sorry, I never use them)
- Virtual SDCARD (/sdcard) unformated
- Multi-language support (including Indic)
- Added init.d script support
- SD card Permissions (extSD can read/write);
- Advertisement blocking (by hosts file)
- GPS Enhancement
- and many more
Requirements:
- Custom Recovery (i.e. TWRP)
- MSM based single device
How to Install:
Kitkat based device (820n):
You must flash Lollipop firmware (firmware.zip) before installing this rom. Please note, flashing Lollipop firmware is irreversible.
- Make sure that you have adb / naked adb driver installed in your computer
- Lock / relock the bootloader (re-unlock before rom installation)
- Boot the device in Bootloader and flash firmware.zip
Code:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot reboot
- Now, flash TWRP recovery
- Reboot into TWRP recovery
Lollipop based device (820n):
- Flash TWRP recovery
- Reboot into TWRP recovery
Download all parts of the rom and use Winrar to merge/extract them.
Copy the Rom to your device under a folder of your sdcard/ext-sd. Reboot your device in recovery. Then, touch Install and select the file. Follow on-screen instructions.
How to write to system partition?
Make sure that you have adb / naked adb driver installed in your computer. Enter adb shell in command prompt. Then, following command into android console:
Code:
su
mount -o remount,rw /system
Notice: I'll not take any responsibility if you brick your device.
Download:
https://drive.google.com/folderview?id=0BxNlt7tBriTPSDVqTHgyV3FyMWM&usp=sharing
Click to expand...
Click to collapse
He.. bro this work 820 dual plz helpp...
---------- Post added at 11:17 PM ---------- Previous post was at 11:12 PM ----------
tomal said:
My custom build of Lollipop for Desire 820 single sim (MSM chipset) devices. I'll try to provide the same for dual sim devices, but it may take some time.
Description of the build:
- Android Lollipop 5.0.2
- Fully rooted
- Modified boot image (boot.img)
- Custom boot animation
- Added busybox
- USB Debuging Enabled (by default)
- Some HTC tools removed (sorry, I never use them)
- Virtual SDCARD (/sdcard) unformated
- Multi-language support (including Indic)
- Added init.d script support
- SD card Permissions (extSD can read/write);
- Advertisement blocking (by hosts file)
- GPS Enhancement
- and many more
Requirements:
- Custom Recovery (i.e. TWRP)
- MSM based single device
How to Install:
Kitkat based device (820n):
You must flash Lollipop firmware (firmware.zip) before installing this rom. Please note, flashing Lollipop firmware is irreversible.
- Make sure that you have adb / naked adb driver installed in your computer
- Lock / relock the bootloader (re-unlock before rom installation)
- Boot the device in Bootloader and flash firmware.zip
Code:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot reboot
- Now, flash TWRP recovery
- Reboot into TWRP recovery
Lollipop based device (820n):
- Flash TWRP recovery
- Reboot into TWRP recovery
Download all parts of the rom and use Winrar to merge/extract them.
Copy the Rom to your device under a folder of your sdcard/ext-sd. Reboot your device in recovery. Then, touch Install and select the file. Follow on-screen instructions.
How to write to system partition?
Make sure that you have adb / naked adb driver installed in your computer. Enter adb shell in command prompt. Then, following command into android console:
Code:
su
mount -o remount,rw /system
Notice: I'll not take any responsibility if you brick your device.
Download:
https://drive.google.com/folderview?id=0BxNlt7tBriTPSDVqTHgyV3FyMWM&usp=sharing
Click to expand...
Click to collapse
Plz plz plz bro.....develop and work htc 820 dual lolypop...... i wait u ....
its give this error when try to flash frimware.zip
medohatem said:
its give this error when try to flash frimware.zip
Click to expand...
Click to collapse
1- Your device should be LOCKED or RELOCKED via this FASTBOOT command (fastboot oem lock)
2- Then RENAME the firmware.zip to 0PFJIMG.zip and put it in your sdcard then go to hboot , it will be installed after your confirmation.
3- FINALY flash any custom recovery [ i prefere TWRP in this thread ] , then install this custom rom.
tareqak13 said:
1- Your device should be LOCKED or RELOCKED via this FASTBOOT command (fastboot oem lock)
2- Then RENAME the firmware.zip to 0PFJIMG.zip and put it in your sdcard then go to hboot , it will be installed after your confirmation.
3- FINALY flash any custom recovery [ i prefere TWRP in this thread ] , then install this custom rom.
Click to expand...
Click to collapse
1- my device is relocked
2-i tried rename it it give signature error in hboot
medohatem said:
1- my device is relocked
2-i tried rename it it give signature error in hboot
Click to expand...
Click to collapse
Be sure that you extracted the firmware.zip from the right OTA
medohatem said:
its give this error when try to flash frimware.zip
...
Click to expand...
Click to collapse
Use the fastboot.exe available in my download site (under Tools). Repeat the flash a few times...
If still getting the error then manually flash the boot and recovery img from firmware.zip, reboot the device and try once again.
chitranjn_k said:
He.. bro this work 820 dual plz helpp...
...
Plz plz plz bro.....develop and work htc 820 dual lolypop...... i wait u ....
Click to expand...
Click to collapse
Pls DO NOT QUOTE the whole 1st post...
Working for dual sim is a bit complicated for me since I don't have one at the moment. But I'll try.
tomal said:
Pls DO NOT QUOTE the whole 1st post...
Working for dual sim is a bit complicated for me since I don't have one at the moment. But I'll try.
Click to expand...
Click to collapse
Why I can not remove bloatware or other or add to system app new one from this rom? its about kernel?
Can be this fixed or another way to do this?
tomal said:
Use the fastboot.exe available in my download site (under Tools). Repeat the flash a few times...
If still getting the error then manually flash the boot and recovery img from firmware.zip, reboot the device and try once again.
Click to expand...
Click to collapse
i did like u said but no hope the same problem
Weather with animation choses :/
free picture upload
Here is a tool provided by @GokulNC and modified with instructions from here: https://forum.xda-developers.com/showpost.php?p=73942075&postcount=144
GokulNC said:
Please try the following steps for your Lenovo Tab 3 Plus YT-X703F and tell me if it works:
1. Download the tool for Mi 5: https://forum.xda-developers.com/mi-5/how-to/guide-how-to-create-custom-splash-t3425054
2. Open bin/logo_gen.py & change "SUPPORT_RLE24_COMPRESSIONT = 0" to "SUPPORT_RLE24_COMPRESSIONT = 1 " (in line 71) and save the script.
3. Now use a 1600x2560 picture to create a splash.img using the same tool and flash it.
If it works, please post the modified tool in your device's sub-forum so that it'll be useful for others
Click to expand...
Click to collapse
I found that the image needs to be in portrait, (Or rather create in landscape, then rotate 90 degrees to the right)
Here are instructions taken from here https://forum.xda-developers.com/mi-5/how-to/guide-how-to-create-custom-splash-t3425054 and edited for the modified tool for Yoga Tab 3 Plus:
Note:
This is not a bootanimation, this is the splash screen (the 'Lenovo' boot logo which is displayed when the device is switched ON)
This is for Yoga Tab 3 Plus YT-X703F Only
Requirements:
1. Rooted Yoga Tab 3 Plus YT-X703F
2. Optional: Terminal Emulator app or Custom Recovery or at least working fastboot in computer
3. You're proceeding at your own risk.
STEPS to create splash.img:
Before proceeding, make sure fastboot is setup properly on your computer (just in case something goes wrong)..
1. Download & Extract this: https://forum.xda-developers.com/attachment.php?attachmentid=4291531&stc=1&d=1507064918
2. Make sure you have a picture with resolution of 1600x2560 portrait (Make the image in landscape, then rotate 90° to the right)
Note:
In fact, you don't need a 1600x2560 picture, you can even have a picture with any resolution lower than device resolution, which will automatically be centred while booting.
3. Now rename your picture as logo.png or logo.jpg (according to the format) & replace it inside "pics" folder of the extracted folder.
(Or you can also directly edit the picture inside)
4. Finally, run the 'CREATE_LOGO.bat' to create splash.img , which you can find inside the "output" folder after completion.
STEPS to flash splash.img:
Optional: To backup your original splash.img:
Code:
dd if=/dev/block/bootdevice/by-name/splash of=/sdcard/splash.img
Now, Choose any one easy method to install:
a. To flash from recovery:
Transfer the flashable_splash.zip to your device and flash from TWRP or other custom recovery.
b. To flash from Terminal Emulator:
Transfer the splash.img to your device's Internal Storage, Open Terminal Emulator & enter the following to flash it:
Code:
su
dd if=/sdcard/splash.img of=/dev/block/bootdevice/by-name/splash
c. To flash from Fastboot mode:
Code:
fastboot flash splash splash.img
Note:
In case something goes wrong or device doesn't bootup, flash the stock splash.img from custom recovery or fastboot. I've also attached a flashable zip of the original YT-X703F splash.img
Credits:
1. @GokulNC who wrote this script
2. Based on logo_gen.py script
Hit the Thanks :good: button if it worked for you
Reserved
Thank you for sharing this! I hadn't realized that these scripts come straight from Qualcomm, although when you think about it, it does make sense
Thanks for the wonderful article, the device which I am doing this is also in your list, but somehow its not working for me, am I missing anything ?
Code:
[email protected] Root % fastboot flash splash splash.img
Sending 'splash' (44 KB) OKAY [ 0.009s]
Writing 'splash' FAILED (remote: 'This partition doesn't exist')
fastboot: error: Command failed
gtl-madhav said:
Thanks for the wonderful article, the device which I am doing this is also in your list, but somehow its not working for me, am I missing anything ?
Code:
[email protected] Root % fastboot flash splash splash.img
Sending 'splash' (44 KB) OKAY [ 0.009s]
Writing 'splash' FAILED (remote: 'This partition doesn't exist')
fastboot: error: Command failed
Click to expand...
Click to collapse
Which device do you have?
scoobyjenkins said:
Which device do you have?
Click to expand...
Click to collapse
Lenovo TB-8505X
@scoobyjenkins is it possible you can tell me where they have actually stored that -> splash.img file or logo.img or logo.bin file ?
I am trying this from 3 days, searching all round. not succeeded. sorry but I am not very good with all this stuff, Just learning from you all experienced XDA members.
Delete
gtl-madhav said:
Lenovo TB-8505X
Click to expand...
Click to collapse
gtl-madhav said:
@scoobyjenkins is it possible you can tell me where they have actually stored that -> splash.img file or logo.img or logo.bin file ?
I am trying this from 3 days, searching all round. not succeeded. sorry but I am not very good with all this stuff, Just learning from you all experienced XDA members.
Click to expand...
Click to collapse
Sorry, this is for Yoga Tab 3 Plus YT-X703F only. All I did was ask on the thread by GokulNC, linked in the OP, and he gave me instructions to modify a tool for another device. That worked so I created this thread with the modified tool for YT-X703F. If you go to GokulNC's thread, hopefully you can get some help there
scoobyjenkins said:
Delete
Click to expand...
Click to collapse
I am very new to XDA, can you tell me what you saying here.
gtl-madhav said:
I am very new to XDA, can you tell me what you saying here.
Click to expand...
Click to collapse
The tool in this thread is based on the work of GokulNC and his thread is here: https://forum.xda-developers.com/t/...en-for-snapdragon-devices-splash-img.3470473/
You will need to ask your question there as I can't help with your device. My thread is only for the Yoga Tab 3 Plus YT-X703F
Note:
This is not bootanimation, this is the splash screen (the 'Mi' boot logo which is displayed when device is switched ON)
This is for Redmi 5A Only..
For other devices, please send me your splash.img so that I can create a tool for you too.
Requirements:
1. Rooted Redmi 5A (any ROM)
2. Optional: Terminal Emulator app or Custom Recovery or atleast working fastboot in computer
3. You're proceeding at your own risk.
STEPS to create splash.img:
Before proceeding, make sure fastboot is setup properly in your computer (just incase something goes wrong)..
1. Download & Extract this in computer: Redmi_5A_Splash_Maker.zip
2. Make sure you have a 720x1280 resolution picture.
3. Now rename your picture as logo.png or logo.jpg (according to its format) & replace it inside "pics" folder of the extracted folder.
(Similarly you can also change fastboot.png if you wish to change the picture of fastboot)
4. Finally, run the 'Create_Logo.bat' to create splash.img , which you can find inside the "output" folder.
STEPS to flash splash.img:
Optional: To backup your original splash.img:
Code:
dd if=/dev/block/bootdevice/by-name/splash of=/sdcard/splash.img
(Not necessary though.. You may get it from the stock firmware itself.)
Now, Choose any one easy method:
a. To flash from recovery:
Transfer the flashable_splash.zip to your device and flash from TWRP or CWM or Philz or any other custom recovery.
b. To flash from Terminal Emulator:
Transfer the splash.img to your device's Internal Storage, Open Terminal Emulator & enter the following to flash it:
Code:
su
dd if=/sdcard/splash.img of=/dev/block/bootdevice/by-name/splash
c. To flash from Fastboot mode:
Code:
fastboot flash splash splash.img
Note:
Incase something goes wrong or device doesn't bootup, flash the stock splash.img from custom recovery or fastboot.
Credits:
Thanks to @franktom for the stock splash.img of Redmi 5A.
Hit the Thanks :good: button if it worked for you
You're welcome to post the splash images that you created..
Thank you very much for build this tool.
---------- Post added at 05:13 AM ---------- Previous post was at 05:00 AM ----------
franktom said:
Thank you very much for build this tool.
Click to expand...
Click to collapse
I'm tested, it's worked as expect, thanks, love u.
Please friend help me its not working friend for me when i sets splash screen by flashing zip file using twrp latest them my spash screen what i created it comes for a little second like 0.0000001s and then mi stock splash screen appears and then it starts bootanimation and finaly i am back to my lockscreen please help me fast i am on redmi 5A custom rom cr droid how to do it please tell me
successfully changing my redmi 5a splash screen, thank you!
permission to try.thank's
Really helpfull
:good: Thanks Bro
Can anyone make splashscreen google for me
Ok
eelsymbianers said:
Can anyone make splashscreen google for me
Click to expand...
Click to collapse
I Just made Google bootlogo
Where to get pocophone splash screen.
...
It bricked my redmi 5a, when booting, xiaomi bunny appears and random characters then it boots into 900e diagnostics mode...
I flashed with fastboot flash splash splash.img... Now I'm trying to repair with MiFlash. :crying:
EDIT:
May be the problem that I flashedwith that default Google logo andnot a 720x1080 picture?
Any Telegram channel/group to download custom splashes?
kalmin06 said:
Any Telegram channel/group to download custom splashes?
Click to expand...
Click to collapse
Telegram links are not allowed to be shared here
Hi, first of all, I'm not a dev or else just user who had difficulties to flash GSI on my phone... Was 7 years with a samsung galaxy Note 3, with twrp....So easy to flash....
with the help of @gr0ndpa, thanks to him.....
FLASH GSI
Now I will explain how to flash easily with files attached
1/ first of all you need a phone and drivers installed, use xiaomi pc suite, unzip and install it
2/ you need to activate USB debug in dev options.
3/ dl adb folder unzip it and put in C
4/ run command and type
Code:
cd /adb
5/ then
Code:
adb devices
to check if phone recognised
6/
Code:
adb reboot bootloader
once in fast boot
7/
Code:
fastboot flash vbmeta vbmeta.img
wait finished type to enter in fastbootD
8/
Code:
fastboot reboot fastboot
9/
Code:
fastboot flash system
LiR 313.XXX.img
you will have a system error, but wait the flash begin in few seconds
at the end wait ok then
10/
Code:
fastboot reboot recovery
on stock recover
11/ wipe data and reboot with +/- and PWR
and you're done...
In case you want to flash custom kernel or patched boot image to root with magisk, you have to
12/
Code:
adb reboot bootloader
Copy kernel boot image to C drive and rename kernel boot image to boot.img.
13/
Code:
fastboot flash boot c:\boot.img
14/
Code:
fastboot reboot
In case you want to flash twrp put the file to adb folder and type in fastboot
15/
Code:
fastboot boot twrp.img
Downloads for : Xiaomi Mi 11 Lite 5G | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
You can check what I ve done on tuto ss...
if you have some comments, don't hesitate...
I flashed LiR 18.1 rom and very happy with it.....
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++==================================================================================================================================================================================================================++
Flash ROM
This now how to flash ROM on your device, it's convenient for all roms like LOS, corvus, awaken...
First you need all the proper drivers installed and unlocked bootloader, USB debugging all of that stuff.
Now open up a cmd/terminal , and put the files i sent and the ROM file in the folder from where you're opening the cmd/terminal and connect the phone (you may need to put ./ as an suffix for all the commands if you're on linux)
Type
Code:
adb reboot bootloader
Then type
Code:
fastboot devices
to see if everything is ok
Then type
Code:
fastboot flash boot_ab boot.img
(you can drag and drop the file instead of typing it)
After that's done type
Code:
fastboot flash vendor_boot_ab vendor_boot.img
(you can drag and drop this too if you want)
Code:
fastboot flash dtbo dtbo.img
(you can drag and drop this too if you want)
After that's done type
Code:
fastboot reboot recovery
This will boot you into a recovery and now you need to go to wipe and format data
After that go to apply update then adb sideload then
In the cmd type
Code:
adb sideload rom.zip
for example (you put the ROM zip here you can drag and drop it)
Wait for that to finish it will go to 47% and on the phone it will show step 1/2 then step 2/2
and when it's done it's gonna show an error
adb: failed to read command: No error
Then you can reboot to system
Hello thank your for the short HowTo. Unfortunately im stuck on invalid sparse error. Could you pls post a fix to solve this? Would appreciate your help.
hardshell said:
Hello thank your for the short HowTo. Unfortunately im stuck on invalid sparse error. Could you pls post a fix to solve this? Would appreciate your help.
Click to expand...
Click to collapse
You have to wait at least 30 sec after the error appear...
Are you sure you are on fastbootD???
tuto modified and completed to also root device with magisk and patch boot.img
when i restart into fastboot, it is frozen.
dy2592 said:
when i restart into fastboot, it is frozen.
Click to expand...
Click to collapse
normal, nothing happens on fastboot....when you flash, only thing is on your computer, not on screen..
cant seem to get this installed =(
rayman95 said:
8/
Code:
fastboot reboot fastboot
Click to expand...
Click to collapse
After I enter this, it just stays on waiting for any device.
Update: I was able to figure it out. My device had no drivers so I went search through updates on windows and installed a LeMobile Android driver os it shows up properly in device manager.
How does one install gapps?
dy2592 said:
After I enter this, it just stays on waiting for any device.
View attachment 5419437
Update: I was able to figure it out. My device had no drivers so I went search through updates on windows and installed a LeMobile Android driver os it shows up properly in device manager.
Click to expand...
Click to collapse
because you don't have xiaomi drivers installed...install xiaomi pc suite and you will have drivers installed...
duplicate
rayman95 said:
In step 14, I encountered the error "fastboot: error: ANDROID_PRODUCT_OUT not set" after executing the fastboot flash system command. what do I need to do?
Click to expand...
Click to collapse
Did you insert the img at the end?
Fastboot flash system LIRxxxxxxxxxxxx.img
you have to put your rom to adb folder and dont forget to add .img at the end
rayman95 said:
you have to put your rom to adb folder and dont forget to add .img at the end
Click to expand...
Click to collapse
1.img is your rom Is there anything else missing?
dy2592 said:
Did you insert the img at the end?
Fastboot flash system LIRxxxxxxxxxxxx.img
Click to expand...
Click to collapse
yaha your right thank you so much
rayman95 said:
you have to put your rom to adb folder and dont forget to add .img at the end
Click to expand...
Click to collapse
thank I solved my problem. Now I have another problem, how to install GAPPs
Patrick Star_ said:
thank I solved my problem. Now I have another problem, how to install GAPPs
Click to expand...
Click to collapse
run twrp, it's explain in 1st post or maybe try with magisk...I can install minimicroG nogoolag with it..
rayman95 said:
run twrp, it's explain in 1st post or maybe try with magisk...I can install minimicroG nogoolag with it..
Click to expand...
Click to collapse
I tried to use twrp to brush into GAPP, but the error is 70. How can I solve it? I don't know if there is a problem with my twrp. Can you send a tutorial on xiaomi11 Lite 5g installing twrp? Thank you very much
Patrick Star_ said:
I tried to use twrp to brush into GAPP, but the error is 70. How can I solve it? I don't know if there is a problem with my twrp. Can you send a tutorial on xiaomi11 Lite 5g installing twrp? Thank you very much
Click to expand...
Click to collapse
In case you want to flash twrp put the file to adb folder and type in fastboot
15/
Code:
fastboot boot twrp.img
And twrp link is in post 1..maybe you choose bad gapps variant