STUCK ON BOOT ANIMATION
I have a Xiaomi Redmi Note 3 (Kenzo). When installing latest version of Resurrection Remix of this device(July 9, weekly) , it gets gets stuck on " Get Resurrected" logo (more than 15 mins). I saw a video on YouTube, flashing ROM, dated 25th April(nightly). I did the same and woah, it worked. Why is this happening?
Here's what I did (from starting)--
1. Was on MIUI version 8.5. Downgraded to 7.18, unlocked bootloader (unofficially).
2. Installed twrp 3.0.2 recovery. Wiped everything (except microSD).
3. Flashed cm14.1 firmware ( read on xda or something that flash this before flashing any nougat ROM).
4. Flashed latest build, with gapps, and mi boot logo.
5. Stuck on "get Resurrected".
6. As I was stuck, I wiped everything (except microSD). Now flashed 25th April ROM, with gapps and Mi boot logo.
And everything works fine in this. Although LED continuously flashes red while charging, but it isn't much of a problem.
Anyone else encountered this problem?
Related
Hi All,
Last week, I flashed my LG Nexus 4 (16GB) phone with stock Android 4.4 (Official Image), before that I was on CyanogenMod 10.1.3 Stable.
Now, for some reason I didn't like the stock 4.4 and tried to Flash back my CyanogenMod 10.1.3 from CWM "Install ZIP" but the problem I'm facing is that it CyanogenMod doesn't boot, hangs on "Spiral Splash Screen". Then I tried Flashing CM 10.0 stable, still loops into boot forever and at times boots (after 15-20 minutes of booting on spiral splash screen) and doesn't recognise SIM card, Camera, Storage, WIFI or anything.
Then after getting fed up with this I tried flashing MIUI V5. This also takes a 15-20 to boot and fails to recognise - SIM, WiFi, Camera etc.
So lastly like a loser I flashed back my Android 4.4 it works fine.
I've my boot-loader in unlocked state.
and Yes before flashing CM or MIUI, I did - wipe data/factory, wipe cache, wipe dalvik cache from CWM Recovery.
So I want to get back into CyanogenMod 10.1 stable. Help me out with this.
Restoring Nexus 4
prakharprasad said:
Hi All,
Last week, I flashed my LG Nexus 4 (16GB) phone with stock Android 4.4 (Official Image), before that I was on CyanogenMod 10.1.3 Stable.
Now, for some reason I didn't like the stock 4.4 and tried to Flash back my CyanogenMod 10.1.3 from CWM "Install ZIP" but the problem I'm facing is that it CyanogenMod doesn't boot, hangs on "Spiral Splash Screen". Then I tried Flashing CM 10.0 stable, still loops into boot forever and at times boots (after 15-20 minutes of booting on spiral splash screen) and doesn't recognise SIM card, Camera, Storage, WIFI or anything.
Then after getting fed up with this I tried flashing MIUI V5. This also takes a 15-20 to boot and fails to recognise - SIM, WiFi, Camera etc.
So lastly like a loser I flashed back my Android 4.4 it works fine.
I've my boot-loader in unlocked state.
and Yes before flashing CM or MIUI, I did - wipe data/factory, wipe cache, wipe dalvik cache from CWM Recovery.
So I want to get back into CyanogenMod 10.1 stable. Help me out with this.
Click to expand...
Click to collapse
Hello Prakhar,
I would suggest you to first download the official image of Nexus 4 for android 4.3 and flash it from https://developers.google.com/android/nexus/images and then you can try to flash CM 10.1.3 from the CWM Recover Console. Hope this helps!
I would also like to point you out to https://developers.google.com/android/nexus/drivers which contains drivers for your phone's camera, etc. you can download those binary and flash it one by one through your recovery console, which might fix your issues.
It worked !
Downgraded to stock 4.2.2 then Flashed CM 10.2 RC1 from CWM Recovery !
Thanks a lot U3ViaGFsbyA6UA==
Hi!
I flashed CM 13 on my RedMi 3, after some weeks I wanted to go back to XiaoMi.EU MiUi so I wiped dalvik, cache, data and system partitions then I restored the backup but it didn't boot up (it showed Mi logo then it reboots); I tried to make a clean flash but it still didn't boot up.
I flashed latest china developers firmware but it didn't boot up too; I tried with global developers and I found that the bootloader has been blocked (I don't know why), I unlocked it and tried again but it still didn't boot up.
I tried to flash vietnamese unbrick firmware but it stil didn't boot up.
I reflashed CM 13 but it doesn't boot up.
What's happened? I ran out of ideas. :silly:
Sorry for my bad english.
try this:
http://en.miui.com/forum.php?mod=redirect&goto=findpost&ptid=342268&pid=6219442
retakal said:
try this:
http://en.miui.com/forum.php?mod=redirect&goto=findpost&ptid=342268&pid=6219442
Click to expand...
Click to collapse
It didn't work. Thanks anyway.
After a lot of experiments I got CM 12.1 working; unfortunately it's the only one ROM that boots. :|
@Anik_khan: Have you ever tried to go back to MiUi from CM 13?
EDIT: Sometimes when I try to turn it off it reboots and sometimes it reboots 5/6 times before boot up.
I tried to flash English unbrick ROM and XiaoMi.EU fastboot ROM too but they don't boot.
On CM 12.1 audio doesn't work. I start thinking that's an hardware fault because I tried all possible solutions.
I tried latest @Anik_khan's CM 13, latest XiaoMi.EU weekly and FlyMe too but they don't boot (on CM 13 I don't even see bootanimation). If I flash a custom Kernel (for example MYKernel) on CM 12.1 it doesn't boot anymore.
I suggest you to go to Mi service center.
Hi, I have rooted my asus zenfone 2 laser ze550kl/Z00L and had installed cm 14.1 in it. Everything was working fine until I booted to recovery through CM Updater for installing update. After flashing the update the phone continuously boots to recovery without even pressing vol down. I have tried wiping data, cache, system and reflashing previous cm 14.1 ROMs but still the same.
Problem resolved. Flashing the latest TWRP did the trick!:fingers-crossed:
Hi,
I've got a RN3, snapdragon version, 3GB of RAM. Unlocked bootloader. TWRP 3.0.2-2
I've been using CM for a while, android 6.0.1 and I've been trying now for a few days to move to Nougat.
I've tried different roms: NitrogenOS, lineage OS, resurrectionRemix.
I've also tried flashing different versions os miui firmware: 7.3.16, 7.3.23, 7.3.30
So, after all that, the result is always the same. The flashing seems successful, the phone boots but then I cannot go through the initial setup screen.
I choose the wifi network but when I try to enter the password, the screen resets every 5 seconds or so. I know it's resetting/reloading because the password I've typed so far goes away and I have to start again. It happens every few seconds and I cannot setup wifi properly.
I tried changing the password to aaaaaaaaaa to make it easy and quick to setup. Once I go through that, it stays for ever in the next screen "checking information" (or something like that). Again, it seems to be reloading this screen every few seconds.
is there something am I missing? Maybe I'm flashing firmware/rom in the wrong order?
I'm back with android 6.0.1 now and the phone works fine.
thanks in advance for your help.
Flash Kenzo Firmware , Rom & Nougat Gapps not MM , next reboot system
Sent from my Redmi Note 3 using Tapatalk
VaibhavKumar07 said:
Flash Kenzo Firmware , Rom & Nougat Gapps not MM , next reboot system
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
thanks @VaibhavKumar07
so, this is exactly what I've tried a few times.
what about wipes and all that stuff?
I don't mind doing a clean install and reinstalling/reconfiguring everything.
I've tried different things, but for example what is mentioned in the thread "CM13/14/14.1/AOSP N firmware for KENZO/KATE [VoLTE][12.1.2017]"
-Reboot to TWRP recovery
-Flash firmware
-Factory reset (data, cache and dalvik-cache)
-Flash your favorite Marshmallow or Nougat ROM
-Reboot your phone
is that still valid for the nightly builds from April 2017?
On Cm firmwares I was unable to get VoLTE working so recommend you to flash Miui beta firmware search in SD Rom or guide section you'll find em if not message me again .
Regarding procedure :
- First flash Twrp 3.1.1.0 from official site cuz that's latest
- Next go & wipe check everything except SD card & OTG
- Flash Firmware
- Flash Rom
- Flash Gapps Arm *64 Android N from Open apps
- Flash Any Add-ons if required like kernel or Sound enhancement mods ( optional )
- Clean cache/dalvik cache
- Reboot
Mention the Rom you're flashing!
Sent from my Redmi Note 3 using Tapatalk
So, I did all that several times, except for flashing the latest twrp version. I'm on 3.0.2-2 because it flashes ok but when rebooting it's back to 3.0.2-2. I'm doing this from fastboot. I'm not only loading, but flushing. It seems to be ok but then it's gone after reboot.
Anyway, I've tried this procedure with 3 different roms:
ResurrectionRemix
LineageOS
Nitrogen OS
flashing latest versions for each rom.
Could the twrp not updating properly have something to do with this issue? does the latest version fix some flashing issues with Nougat?
the thing is that if flashed and boots, but it doesn't run properly as mentioned.
I will try to get latest twrp version working and report back if that makes any difference.
VaibhavKumar07 said:
On Cm firmwares I was unable to get VoLTE working so recommend you to flash Miui beta firmware search in SD Rom or guide section you'll find em if not message me again .
Regarding procedure :
- First flash Twrp 3.1.1.0 from official site cuz that's latest
- Next go & wipe check everything except SD card & OTG
- Flash Firmware
- Flash Rom
- Flash Gapps Arm *64 Android N from Open apps
- Flash Any Add-ons if required like kernel or Sound enhancement mods ( optional )
- Clean cache/dalvik cache
- Reboot
Mention the Rom you're flashing!
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
so, still fighting with this.
i managed to upgrade to twrp 3.1.0-1, all good.
however, i still have the same problem with the initial screen, it keeps reloading every few seconds and can't finish the setup or even skip it.
i've tried different versions of firmware. I've also tried flashing the latest miui rom (dev and global) and then a custom rom.
i've tried different builds (different dates) of the following roms:
nitrogenOS
lineageOS
aospextended
mokee
resurrectionremix
exact same behaviour with all these roms.
what am I doing wrong? i'm on marshmallow and everything works fine, but stuck moving to nougat. do I have to flash something not mentioned already to move from custom MM to custom Nougat?
txutxe said:
so, still fighting with this.
i managed to upgrade to twrp 3.1.0-1, all good.
however, i still have the same problem with the initial screen, it keeps reloading every few seconds and can't finish the setup or even skip it.
i've tried different versions of firmware. I've also tried flashing the latest miui rom (dev and global) and then a custom rom.
i've tried different builds (different dates) of the following roms:
nitrogenOS
lineageOS
aospextended
mokee
resurrectionremix
exact same behaviour with all these roms.
what am I doing wrong? i'm on marshmallow and everything works fine, but stuck moving to nougat. do I have to flash something not mentioned already to move from custom MM to custom Nougat?
Click to expand...
Click to collapse
Try this once (Clean) :
Flash Nitrogen
Reboot
Flash gapps and firmware.
Hope it may work for you.
Hi
I have a strange Problem. that i never had before.
I have a S9+ SM-G965FD and want to install LineageOs /Resurrection Remix or any other Rom xD
I have installed TWRP successfully
But after ( i format data or Wipe or made a factory reset, i used every manual) i flashed the ROM (diffrent versions etc.) i stuck at the " S9+ powerd by android" Logo, nothing will happen , i have waited more than 1 hour....
Does anyone have an idea whats my Problem, or what I´m doing wrong?
Thanks
Jonas
PS:
Strangely, Soldier's "aroma rom" (https://forum.xda-developers.com/ga...g96xf-fd-n-stock-rom-soldier9312-1-0-t3771346)
works without any problems, but I'd like Lineage OS, and there it still stucks
jbirner said:
Hi
I have a strange Problem. that i never had before.
I have a S9+ SM-G965FD and want to install LineageOs /Resurrection Remix or any other Rom xD
I have installed TWRP successfully
But after ( i format data or Wipe or made a factory reset, i used every manual) i flashed the ROM (diffrent versions etc.) i stuck at the " S9+ powerd by android" Logo, nothing will happen , i have waited more than 1 hour....
Does anyone have an idea whats my Problem, or what I´m doing wrong?
Thanks
Jonas
PS:
Strangely, Soldier's "aroma rom" (https://forum.xda-developers.com/ga...96xf-fd-n-stock-rom-soldier9312-1-0-t3771346)
works without any problems, but I'd like Lineage OS, and there it still stucks
Click to expand...
Click to collapse
Try flashing the bre5 vendor before flashing the lineage os rom. And also gapps after flashing the rom.
bobandar said:
Try flashing the bre5 vendor before flashing the lineage os rom. And also gapps after flashing the rom.
Click to expand...
Click to collapse
Everything at the same time?
Or install bre5 Reboot recovery
Install LinOS Reboot recovery
Flash Gapps Reboot System
Thanks for help
Where do i get bre5 cant find it on google or on Soldiers site ...
And which one must i take