Hi all,
trying to track down a TWRP recovery for Ulefone Gemini Pro? I've tried using the Umidigi Pro Z but it won't "stick", i.e. it is installing however it boots back to normal system & reinstalls the stock recovery.
I realise it is a newish phone so a custom recovery may not have been created as yet?
Any advice would be appreciated.
I have created a recovery for Ulefone gemini pro. You can try this and see how it goes:
https://mega.nz/#!8f43VYLa!o-elPp74o35tm3AdtcW1wVbFnBHIGi_dUP7skWWGmOM
The problem is that touch is not working. The issue is not with the Recovery image, but the device itself. If I flash the image to boot partition, touch works. I have tried flashing the boot image to recovery partition and it booted to the OS, but touch was not working. So it looks like kernel booting from recovery partition cannot iniialize the touch sensor. Kernel logs also shows that touch sensor failed to initialize. Will create a new thread to discuss this.
You also need a modified boot image for the recovery image not to be re-written. You can use this modified boot image here:
https://mega.nz/#!sHQxySJL!MRqtD6-VoZMLyEpr-ym7LlktiMR0GXYKUuLZlpbxhE0
vineethrp said:
I have created a recovery for Ulefone gemini pro. You can try this and see how it goes:
https://mega.nz/#!8f43VYLa!o-elPp74o35tm3AdtcW1wVbFnBHIGi_dUP7skWWGmOM
The problem is that touch is not working. The issue is not with the Recovery image, but the device itself. If I flash the image to boot partition, touch works. I have tried flashing the boot image to recovery partition and it booted to the OS, but touch was not working. So it looks like kernel booting from recovery partition cannot iniialize the touch sensor. Kernel logs also shows that touch sensor failed to initialize. Will create a new thread to discuss this.
You also need a modified boot image for the recovery image not to be re-written. You can use this modified boot image here:
https://mega.nz/#!sHQxySJL!MRqtD6-VoZMLyEpr-ym7LlktiMR0GXYKUuLZlpbxhE0
Click to expand...
Click to collapse
Hi,
thanks for this however neither seem to be working? I installed both, lost touch completely & couldn't boot into recovery? I then had to restart the phone & everything was back to normal.
Looks like more work has to be done in this area however I'm not the one that can do it! Nice try though!
mightymaki said:
Hi,
thanks for this however neither seem to be working? I installed both, lost touch completely & couldn't boot into recovery? I then had to restart the phone & everything was back to normal.
Looks like more work has to be done in this area however I'm not the one that can do it! Nice try though!
Click to expand...
Click to collapse
Thanks for trying it out. Actually, if you install the recovery.img to boot partition, touch works. So looks like the device has disabled touch hardware when booting from recovery. I have started a separate thread asking for help
https://forum.xda-developers.com/android/software-hacking/ulefone-gemini-pro-touch-booting-t3640374
mightymaki said:
Hi,
thanks for this however neither seem to be working? I installed both, lost touch completely & couldn't boot into recovery? I then had to restart the phone & everything was back to normal.
Looks like more work has to be done in this area however I'm not the one that can do it! Nice try though!
Click to expand...
Click to collapse
maybe this is kinda obvious for you, but you can use a mouse to use the twrp. took me days to realize this "genius" solution
nunom66 said:
maybe this is kinda obvious for you, but you can use a mouse to use the twrp. took me days to realize this "genius" solution
Click to expand...
Click to collapse
Hello!!! Is this true? Can you handle TWRP recovery with a mouse ??? I need to do root because I have lost the IMEIs.
Could a non-tactile recovery work like the CWM Recovery from Clockworkmod ???
could a non-tactile recovery work?
Regars from Spain
So we can root only if we have a :
- OTG cable
- A mouse
Can you guys do a instructive tutorial ? Like step by step and just not dropping the files and good luck ?
Because it's just not about me but the others that will come and they want to root their phones too
Ps : i know that i can use adb to flash my images etc .. i'm just not too sure about it , and for now i don't have a OTG cable so any of you have any news why the touch isn't working with twrp ?
Thank you , have a nice day !
toxic94400 said:
So we can root only if we have a :
- OTG cable
- A mouse
Can you guys do a instructive tutorial ? Like step by step and just not dropping the files and good luck ?
Because it's just not about me but the others that will come and they want to root their phones too
Ps : i know that i can use adb to flash my images etc .. i'm just not too sure about it , and for now i don't have a OTG cable so any of you have any news why the touch isn't working with twrp ?
Thank you , have a nice day !
Click to expand...
Click to collapse
Anyone managed to do this too? i also lost my EMEI;....
Found this on Russian 4PDA forum TWRP 3.1.1 I am not sure if it's touch is working or not as google does not translate it very well.
I do not own this device so I am unable to test it.
bigrammy said:
Found this on Russian 4PDA forum TWRP 3.1.1 I am not sure if it's touch is working or not as google does not translate it very well.
I do not own this device so I am unable to test it.
Click to expand...
Click to collapse
Hey man , nice found !
from what google translate translated in french this root work :
AVERTISSEMENT !! Après avoir installé rekaveri, sous réserve deautorisation des changements dans le système,installation obligatoire SuperSU, sinon le système ne démarre pas.
ATTENTION : After you install rekavery ( WTF is that ?? ) you need to accept modifications on the system , and you HAVE to install SuperSU otherwise the system will not boot
Russian language is like black magic xD
If someone tris it can you confirm this work ?
Thanks
Hi. I repeat again that it does not matter that the touch does not work ... the Recovery works with a mouse and an OTG adapter. Recovery is only for root or to install some zip. Anyway, this Recovery YES works with a mouse.
Seorconde said:
Hi. I repeat again that it does not matter that the touch does not work ... the Recovery works with a mouse and an OTG adapter. Recovery is only for root or to install some zip. Anyway, this Recovery YES works with a mouse.
Click to expand...
Click to collapse
So ... are you rooted right now ? because everyone here knows that the twrp works with a mouse but we want to know if the root works
Best regards from France
toxic94400 said:
So ... are you rooted right now ? because everyone here knows that the twrp works with a mouse but we want to know if the root works
Best regards from France
Click to expand...
Click to collapse
Of course, I'm root. Just install from the Recovery SuperSu ZIP
Seorconde said:
Of course, I'm root. Just install from the Recovery SuperSu ZIP
Click to expand...
Click to collapse
Oh nice bro , can you show it in action ?
What files did you take ? Any version of superSU ? Any Version of twrp ?
toxic94400 said:
Oh nice bro , can you show it in action ?
What files did you take ? Any version of superSU ? Any Version of twrp ?
Click to expand...
Click to collapse
https://www.androidweblog.com/root-ulefone-gemini-pro-install-twrp-recovery/
Do not ask for everything done .... investigate, investigate and further investigate ... but in that link is everything ....
Seorconde said:
https://www.androidweblog.com/root-ulefone-gemini-pro-install-twrp-recovery/
Do not ask for everything done .... investigate, investigate and further investigate ... but in that link is everything ....
Click to expand...
Click to collapse
Thank you but i never asked anythind already done , we are a community , so we need information for everyone
Can you upload a picture of your root ? thank you
everyone IT WORKS! i comfirm that flashing supersu using otgmouse work, i am now rooted and can recover my emei, thank you guys!!!
Thank you anuubid for confirming it , that's awesome the germini pro is officialy rooted !
Congratulations to everyone who participed in search's etc .
:good::good::good:
<Guys, cn anyon ehlp me recover my emei now? its not working at all...
Anubiiis said:
<Guys, cn anyon ehlp me recover my emei now? its not working at all...
Click to expand...
Click to collapse
hey annubiis i need help to root my phone can you help me right now ?
Related
Hey can anyone help me on how to root acer liquid zest (t06) 3g version? I don't seem to find any guides on how to root this phone.
If anyone can help me thanks in advance
Edit:
(Must be flashed with unlocked bootloader.)
To those asking on how I rooted my phone here:
Get this recovery and flash it:Flash this via fastboot/ADB
Mod edit: Link removed as recovery was causing issues with users' devices.
If flashing it doesn't work try booting it instead:
https://aubykhan.wordpress.com/2013/07/21/-tip-boot-into-twrp-or-cwm-recovery-without-flashing/
After Flashing the recovery download supersu and flash it:
https://download.chainfire.eu/969/Su...0630161323.zip
Done you rooted your phone
For anyone asking for a custom rom here:
http://www.droidpeepz.xyz/2016/08/cm-rom-601-cyanogenmod-13-unofficial.html
I know this isn't for acer liquid zest but it worked for me without porting it
try changing themes and settings if the rom is lagging or stuttering
For the stock rom I still need to upload it
Credits:Recovery/Rom
Nana Yaa
Nana Iyke Quame
HostZero
Android Matrix Development
DroidPeepz Inc
Pharaohs Team
Cyanogenmod Team
Nonta72
Ibrahim Fath El-bab
Hey, can you tell me how to unlock the bootloader step by step, I have the same model as you, my OS is marshmallow. Thanks in advance.
MysteriousVoltz said:
Hey, can you tell me how to unlock the bootloader step by step, I have the same model as you, my OS is marshmallow. Thanks in advance.
Click to expand...
Click to collapse
I unlocked my bootloader using this method:
http://rootmygalaxy.net/unlock-bootl...boot-commands/
the download links for recovery is not funtioning
Can you make a stock rom for that.. i have the same device as you. I got into bootloop. Plss badly needed
korinx23 said:
the download links for recovery is not funtioning
Click to expand...
Click to collapse
updated the link
Ziisehahvulon said:
updated the link
Click to expand...
Click to collapse
thank you.. i have a stock rom backup if you need
korinx23 said:
Can you make a stock rom for that.. i have the same device as you. I got into bootloop. Plss badly needed
Click to expand...
Click to collapse
I have the same problem as you do and have installed twrp several times but it's not helping i still get stuck into the bootloop that shows twrp trying to do some things but can't do it. So do anybody know where you can find the stock recovery for this device?
do you have a different link for the CyanogenMod? i can't download it in Mega Server, it says "Limit Exceeded".
Hey guys, bought this phone a month back and tried the recovery in the op and the display was off. As well as a couple of the partitions. Just booting the recovery once messed up my touchscreen somehow and I was unable to repair my phone. So I got another one and I went ahead and unpacked the recovery and repacked it with my recovery kernel as well as removed unnecessary partitions from the list of used partitions in the recovery. If anyone has a new liquid zest with Android 6.0, use this recovery:
https://drive.google.com/file/d/0Bz4bOoJ_E5XzaktJVTcwNFNGazQ/view?usp=drivesdk
Also, I found the stock firmware if anyone needs it, just shout me a message and I'll upload it for you.
smartmanvartan said:
Hey guys, bought this phone a month back and tried the recovery in the op and the display was off. As well as a couple of the partitions. Just booting the recovery once messed up my touchscreen somehow and I was unable to repair my phone. So I got another one and I went ahead and unpacked the recovery and repacked it with my recovery kernel as well as removed unnecessary partitions from the list of used partitions in the recovery. If anyone has a new liquid zest with Android 6.0, use this recovery:
Also, I found the stock firmware if anyone needs it, just shout me a message and I'll upload it for you.
Click to expand...
Click to collapse
Hi smartmanvartan, to be sure is yours the working recovery to root the acer ta6 3g phone?
Leyzl said:
Hi smartmanvartan, to be sure is yours the working recovery to root the acer ta6 3g phone?
Click to expand...
Click to collapse
Yes and furthermore the one in the op damaged my phone.
It's for the Acer z525 aka the T06 liquid zest. Bought mine at Costco.
smartmanvartan said:
Yes and furthermore the one in the op damaged my phone.
It's for the Acer z526 aka the T06 liquid zest. Bought mine at Costco.
Click to expand...
Click to collapse
Ok thanks! From my older type acer phones the recovery where about 6mb this ones are almost double in size.
I will try soon yours.
WARNING
smartmanvartan said:
Hey guys, bought this phone a month back and tried the recovery in the op and the display was off. As well as a couple of the partitions. Just booting the recovery once messed up my touchscreen somehow and I was unable to repair my phone. So I got another one and I went ahead and unpacked the recovery and repacked it with my recovery kernel as well as removed unnecessary partitions from the list of used partitions in the recovery. If anyone has a new liquid zest with Android 6.0, use this recovery:
https://drive.google.com/file/d/0Bz4bOoJ_E5XzaktJVTcwNFNGazQ/view?usp=drivesdk
Also, I found the stock firmware if anyone needs it, just shout me a message and I'll upload it for you.
Click to expand...
Click to collapse
WArnig do not use this recovery for acer liquid T06...this will make your device bootloop
grayironman said:
WArnig do not use this recovery for acer liquid T06...this will make your device bootloop
Click to expand...
Click to collapse
Did you use fastboot? I have the firmware if you need it. What Android version was on your phone? I obviously have the phone and the recovery works like a peach for me....
smartmanvartan said:
Did you use fastboot? I have the firmware if you need it. What Android version was on your phone? I obviously have the phone and the recovery works like a peach for me....
Click to expand...
Click to collapse
yes i use fastboot and i already unlocked bootloader of my phone, i'm using Acer T06 liquid stock firmware but after successfully flashing .img file which you had uploaded my phone keeps on restarting showing twp menu also shows errors then restarting again and again..please help me recover my phone..if you have stock recover please send it to me via pm..thanks in advance
grayironman said:
yes i use fastboot and i already unlocked bootloader of my phone, i'm using Acer T06 liquid stock firmware but after successfully flashing .img file which you had uploaded my phone keeps on restarting showing twp menu also shows errors then restarting again and again..please help me recover my phone..if you have stock recover please send it to me via pm..thanks in advance
Click to expand...
Click to collapse
https://drive.google.com/open?id=0B1NT41MSyvtXN085enA1ZTFfRUE
that is the stock firmware for the acer z525 aka the t06 aka liquid zest. This firmware flashes with sp flash tools. you will need the mtk preloader driver. alternativly, you can just flash the recovery and boot images included in the firmware package with fastboot. the commands are "fastboot flash boot <image>" for the boot and "fastboot flash recovery <image>" for the recovery. now as I said, this recovery works 100% for me and i have the same phone.... so When you unlocked your bootloader, you used the "fastboot oem unlock" command? and did you press the vol up button on the phone afterwards to confirm the unlock? and did it do a factory reset? all of these things are mandatory prior to flashing the recovery. if you did all of that then i gotta ask, Are you sure you have the z525 and not the z528 with lte?
smartmanvartan said:
https://drive.google.com/open?id=0B1NT41MSyvtXN085enA1ZTFfRUE
that is the stock firmware for the acer z525 aka the t06 aka liquid zest. This firmware flashes with sp flash tools. you will need the mtk preloader driver. alternativly, you can just flash the recovery and boot images included in the firmware package with fastboot. the commands are "fastboot flash boot <image>" for the boot and "fastboot flash recovery <image>" for the recovery. now as I said, this recovery works 100% for me and i have the same phone.... so When you unlocked your bootloader, you used the "fastboot oem unlock" command? and did you press the vol up button on the phone afterwards to confirm the unlock? and did it do a factory reset? all of these things are mandatory prior to flashing the recovery. if you did all of that then i gotta ask, Are you sure you have the z525 and not the z528 with lte?
Click to expand...
Click to collapse
yes acer liquid z525 t06 is my phone..thank you for the stock rom.. flashing is successfull but unfortunately my touch screen is not working anymore
grayironman said:
yes acer liquid z525 t06 is my phone..thank you for the stock rom.. flashing is successfull but unfortunately my touch screen is not working anymore
Click to expand...
Click to collapse
You flashed the other recovery that is in the op to didn't you? It messes up the touch screen.
smartmanvartan said:
You flashed the other recovery that is in the op to didn't you? It messes up the touch screen.
Click to expand...
Click to collapse
the recovery i flashed was included at the stock which you had shared earlier..
DOWNLOAD RECOVERY IMAGE
Here is the full guide on How to install
For which version? X720 or X727?
sam razzy said:
DOWNLOAD RECOVERY IMAGE
Here is the full guide on How to install
Click to expand...
Click to collapse
We need to know if its for the Us or Chinese variant.
PeaKay.18 said:
We need to know if its for the Us or Chinese variant.
Click to expand...
Click to collapse
IT DOESNT MATTER. Its the same phone, its good for both. If you flash chinese software on US version and unlock bootloader, you can use this recovery
Veidas said:
IT DOESNT MATTER. Its the same phone, its good for both. If you flash chinese software on US version and unlock bootloader, you can use this recovery
Click to expand...
Click to collapse
Sweet. So does this mean root is available?
PeaKay.18 said:
Sweet. So does this mean root is available?
Click to expand...
Click to collapse
If you flash official chinese rom, you can unlock and root phone same as chinese version.
Veidas said:
If you flash official chinese rom, you can unlock and root phone same as chinese version.
Click to expand...
Click to collapse
Thanks ????
Veidas said:
IT DOESNT MATTER. Its the same phone, its good for both. If you flash chinese software on US version and unlock bootloader, you can use this recovery
Click to expand...
Click to collapse
Some one in other thread said that it may brick the us version if you flash the Chinese twrp and install ROM using it. Can the OP confirm it us universal before we have several bricked phones?
Sent from my LEX727 using Tapatalk
ceo.mtcl said:
Some one in other thread said that it may brick the us version if you flash the Chinese twrp and install ROM using it. Can the OP confirm it us universal before we have several bricked phones?
Sent from my LEX727 using Tapatalk
Click to expand...
Click to collapse
In the same thread there are guys who flashed chinese rom and twrp on us version. No one bricked yet. Its the same phone, dont see why trwp would brick
Veidas said:
In the same thread there are guys who flashed chinese rom and twrp on us version. No one bricked yet. Its the same phone, dont see why trwp would brick
Click to expand...
Click to collapse
OK thank you.
Sent from my LEX727 using Tapatalk
Veidas said:
In the same thread there are guys who flashed chinese rom and twrp on us version. No one bricked yet. Its the same phone, dont see why trwp would brick
Click to expand...
Click to collapse
Could you link this thread thanks
I have a few questions re TWRP:
1.
Are there different versions available for the X720? If yes, which ones (including download link)?
I believe that I have installed this one ( https://www.androidfilehost.com/?fid=529152257862668751 ) which seems to differ from this one: http://www.needrom.com/download/twrp-leeco-le-pro-3/
2.
How are the partitions organized on the Le Pro 3? See also http://forum.xda-developers.com/le-pro3/development/ref-lex720-64gb-partition-infos-t3493528
What is the difference between system and systemimage (as shown in TWRP)?
3.
Does the Le Pro 3 TWRP port still have any bugs?
For instance, it says that system is not mounted and, therefore, I cannot easily restore system partition. I tried to mount it but thereafter the phone did not boot.
Is it normal that system apps get restored if I only restore the data partion?
Thanks.
-Tiz- said:
For instance, it says that system is not mounted and, therefore, I cannot easily restore system partition. I tried to mount it but thereafter the phone did not boot.
Click to expand...
Click to collapse
Sometimes I have the same problem, /system couldn't be mounted.
I solved it like this:
In TWRP go to Wipe -> Advanced Wipe -> Check System Partition -> Repair or Change File System -> Change File System -> EXT4.
Has anyone installed this successfully on 727 US version?
-Tiz- said:
I have a few questions re TWRP:
1.
Are there different versions available for the X720? If yes, which ones (including download link)?
I believe that I have installed this one ( https://www.androidfilehost.com/?fid=529152257862668751 ) which seems to differ from this one: http://www.needrom.com/download/twrp-leeco-le-pro-3/
Click to expand...
Click to collapse
On my x720 I use another one, the latest V4 from chinese sites :
https://mega.nz/#!EVcUCY4J!nN9r170x1eL9uvZg2p4h-q_M9T3I3HxcdSRigl2DNj4
I have now installed TWRP v4 but still have problems to restore a backup.
First, I backed up everything. I tried to restore boot, system, systemimage and data. I did not restore efs, recovery and firmware. Do I have to restore firmware? What is that? What is the difference between system and system image? In any case, I got a lot of errors and the phone is very slow after I restored boot, system, systemimage and data.
Thanks!
The TWRP versions I tried (including v4) have problems and do not reliably mount my encrypted data partition. (I had a similar problem with the initial TWRP ports for the Elephone P8000. The problems were fixed and subsequent ports worked without problems.)
Moreover, if I boot into TWRP recovery the screen is flickering from time to time (probably just a cosmetic issue).
Is there an updated TWRP version 5 or something? Could you please link to the Chinese website where the TWRP port for the LePro3 is made available? Thanks!
I am trying to unlock the bootloader right now using the fastboot oem unlock-go command and it is not working on the US variety. I have also enabled the oem unlocking in dev options, as well as, debugging. Has the US variant changed things to prevent the bootloader from being unlocked?
-Tiz- said:
....
Is there an updated TWRP version 5 or something? Could you please link to the Chinese website where the TWRP port for the LePro3 is made available? Thanks!
Click to expand...
Click to collapse
Here is the orginal TWRP chinese thread, the last version is 2016.11.06 V4 at the moment :
http://bbs.ydss.cn/thread-687153-1-1.html
Yes flickering is a known problem.
losteagle said:
Here is the orginal TWRP chinese thread, the last version is 2016.11.06 V4 at the moment :
http://bbs.ydss.cn/thread-687153-1-1.html
Yes flickering is a known problem.
Click to expand...
Click to collapse
I can't install TWRP, it says it is finished but when entering recovery, still standard EUI recovery is there.
Tried the V4, but can't read what to do. Please help.
Running 18S original.
Edit: Finally worked! Press TWRP.bat from homescreen, enter a few times and all clear!
Hi Guys,
I've got a SGP511 WiFi only (castor_windy), with root access and an unlocked bootloader. but to install AOSP 7.1 I need to update my version of TWRP to 3.0.0.
I installed TWRP via TabZ2-lockeddualrecovery2.8.26 batch file and can access recovery but every time i select install look at my SD card and change to images and select the castor_winsy 3.0.0 image i dont get an option to install to recovery i only get kernel how do i resolve this ?
I have re flashed FW (KitKat) via flashtool loads of times
rooted
installed TabZ2-lockeddualrecovery2.8.26 batch file
and every time i get the same option.... cant flash to recovery or boot only kernel
i have attached a screenshot so that nobody thinks i am going mad
can you please help me thanks :fingers-crossed:
It's been a while since I used TWRP 2.8.XX...so no idea what's the issue there but I'd just flash TWRP recovery via fastboot. Worked for me without any problems :good:
T4ke5 said:
It's been a while since I used TWRP 2.8.XX...so no idea what's the issue there but I'd just flash TWRP recovery via fastboot. Worked for me without any problems :good:
Click to expand...
Click to collapse
Hi ... Is that using the ADB fastboot recovery TWRP.img?
I am on KitKat just wondering if that's why it won't work have you got to be on 6.01 ?
Well, actually it shouldn't matter on which Android version you are, but to have the latest boot.img and radio.img installed I'd flash the latest stock ROM available here on XDA which means by the way having TWRP 3.0.2.0 as well and after that you might be ready for AOSP 7.1
Just have look at kulvertti's thread in the "General" subforum. Since you have already intalled a custom recovery there shouldn't be any problems.
Lockeddual recovery is not compatible with any custom rom
Please follow the instructions in the thread
rcstar6696 said:
Lockeddual recovery is not compatible with any custom rom
Please follow the instructions in the thread
Click to expand...
Click to collapse
Hi @rcstar696 have you got a link to the instructions please as I can't seem to find it ... thanks
nickbaker66 said:
Hi @rcstar696 have you got a link to the instructions please as I can't seem to find it ... thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/xpe.../aosp-6-0-marshmallow-sony-xperia-z2-t3235935
first two steps of instruction
rcstar6696 said:
http://forum.xda-developers.com/xpe.../aosp-6-0-marshmallow-sony-xperia-z2-t3235935
first two steps of instruction
Click to expand...
Click to collapse
Hi @rcstar6696,
i had no problem flashing the boot.img that part was ok but when i went to flash the recovery it never seemed to work for me, in the terminal window in the SDK programme tools folder which is the same folder as the image i downloaded from your thread is in (Twrp-3.0.0-0-castor-windy.img and twrp_castor_windy.img) it said something about sizes but said it went ok tried to boot into recovery and it never worked
in the terminal window whilst my SGP511 was in fastboot mode i typed fastboot recovery Twrp-3.0.0-0-castor-windy.img is this is correct script or have i got this wrong ?
i am currently on Kitkat does this matter
thansk
nickbaker66 said:
in the terminal window whilst my SGP511 was in fastboot mode i typed fastboot recovery Twrp-3.0.0-0-castor-windy.img is this is correct script or have i got this wrong ?
thansk
Click to expand...
Click to collapse
The right command is
fastboot flash recovery PathToRecovery*
Click to expand...
Click to collapse
*C:\stuff\more_stuff\TWRP_castor-windy.img for instance
T4ke5 said:
The right command is
*C:\stuff\more_stuff\TWRP_castor-windy.img for instance
Click to expand...
Click to collapse
Cheers guys I'll give that a go
T4ke5 said:
The right command is
*C:\stuff\more_stuff\TWRP_castor-windy.img for instance
Click to expand...
Click to collapse
rcstar6696 said:
http://forum.xda-developers.com/xpe.../aosp-6-0-marshmallow-sony-xperia-z2-t3235935
first two steps of instruction
Click to expand...
Click to collapse
hi guys i tried what you said and still could get it to work, please see screenshot and check if i have entered something wrong, i dont thinki have but i might be wrong
is it because i have not done the boot image first via fastboot ?
Looks quite good. Did you already try to enter the recovery?
T4ke5 said:
Looks quite good. Did you already try to enter the recovery?
Click to expand...
Click to collapse
i tried to access recovery via the down volume button when the tablet starts up but no green light appears and it just starts normally ...... i ve not flashed the boot.img first then flashed recovery as ive seen it can be done via recovery the only option left now is to try flashing the boot.img first .... i have no option but to try that tonight and see if that can do it that way
@T4ke5 @rcstar6696 thanks very much guys for your help TWRP on 3.0.0 now and AOSP 7.1 installed now
Sweet! :good:
T4ke5 said:
Sweet! :good:
Click to expand...
Click to collapse
Don't laugh but I can't put my WiFi code in because there's no keyboard just tap to speak how can I have the keyboard back lol
T4ke5 said:
The right command is
*C:\stuff\more_stuff\TWRP_castor-windy.img for instance
Click to expand...
Click to collapse
Cheers mate worked a treat
Can anyone please help me to port a TWRP or similiar to my phone? I've tried all the threads and forums for porting to MTK devices and I coudn't port it seems it doesn't on MTK 67XX devices.
I'll be very gratefull.
Link for stock recovery https:// drive.google.com/open?id=0B0M07vEulBG8cUZtS192aUtKVGs
Device: Ulefone Gemini
Model: Gemini
Android: 6.0
MTK: MTK 6737T
Dersaun said:
Can anyone please help me to port a TWRP or similiar to my phone? I've tried all the threads and forums for porting to MTK devices and I coudn't port it seems it doesn't on MTK 67XX devices.
I'll be very gratefull.
Link for stock recovery https:// drive.google.com/open?id=0B0M07vEulBG8cUZtS192aUtKVGs
Device: Ulefone Gemini
Model: Gemini
Android: 6.0
MTK: MTK 6737T
Click to expand...
Click to collapse
Hello, you can try out the TWRP recovery I ported. Let me know how it goes. You can flash it via SP Flashtool with your scatter file.
https://
drive.google.com/open?id=0B7kR2R8eQnonemtaY056dWZxRXc
Christianihechi said:
Hello, you can try out the TWRP recovery I ported. Let me know how it goes. You can flash it via SP Flashtool with your scatter file.
https://
drive.google.com/open?id=0B7kR2R8eQnonemtaY056dWZxRXc
Click to expand...
Click to collapse
Thanks but did not worked, I flashed and entered and recovery mode and still has stock recovery. I'm losing hope to flash it TWRP
Dersaun said:
Thanks but did not worked, I flashed and entered and recovery mode and still has stock recovery. I'm losing hope to flash it TWRP
Click to expand...
Click to collapse
Thanks!!! It worked.
But the touch screen doesnt work there is a way too fix it?
Dersaun said:
Thanks but did not worked, I flashed and entered and recovery mode and still has stock recovery. I'm losing hope to flash it TWRP
Click to expand...
Click to collapse
Really You can try re-flashing it and boot into recovery directly via button combos. In the meantime, I will try to port another and post link.
Dersaun said:
Thanks!!! It worked.
But the touch screen doesnt work there is a way too fix it?
Click to expand...
Click to collapse
Yeap. Stick around, I will get back to you.
Try this and let me know if touch works.
https
://drive.google.com/file/d/0B7kR2R8eQnonekFaUU1qUDI0dG8/view?usp=drivesdk
i been also trying to install twrp on my ulefone gemini... i tryed Christianihechi recovery files.. on both of the files the touch screen didnt work...
Christianihechi said:
Try this and let me know if touch works.
https
://drive.google.com/file/d/0B7kR2R8eQnonekFaUU1qUDI0dG8/view?usp=drivesdk
Click to expand...
Click to collapse
Hi, I tried this one too and also touch didn't work. One more thing I try to used with an OTG mouse to make a backup and after use it my phone got stuck in ulefone logo. I have to unbrick with sp flash tool.
i was able to root my gemini... using the last recovery that Christianihechi give us... i flashed the recovery, got into recovery "touch doesnt work so i connected a usb mouse" and i was able to swape to continue, install supersu zip file, exit from recovery reboot disconect the usb mouse and let the phone boot... and it works fine :laugh:
Wow. That sounds real good. Kudos.
---------- Post added at 04:35 PM ---------- Previous post was at 04:30 PM ----------
I got another one for you guys(thanks to @jemmini). Download from here
http://
www.needrom.com/download/twrp_310/
Flashing is via SP Flashtool. You can give it a shot.
cesarcpp1 said:
i was able to root my gemini... using the last recovery that Christianihechi give us... i flashed the recovery, got into recovery "touch doesnt work so i connected a usb mouse" and i was able to swape to continue, install supersu zip file, exit from recovery reboot disconect the usb mouse and let the phone boot... and it works fine :laugh:
Click to expand...
Click to collapse
Dersaun said:
Hi, I tried this one too and also touch didn't work. One more thing I try to used with an OTG mouse to make a backup and after use it my phone got stuck in ulefone logo. I have to unbrick with sp flash tool.
Click to expand...
Click to collapse
Sorry about that. You can use the recovery here if you haven't successfully rooted your Ulefone Gemini.
http://www.needrom.com/download/twrp_310/
Flashing is via SP Flashtool. Let me know how it goes.
Success Root twrp
Thank you ! It worked perfectly
Christianihechi said:
Sorry about that. You can use the recovery here if you haven't successfully rooted your Ulefone Gemini.
http://www.needrom.com/download/twrp_310/
Flashing is via SP Flashtool. Let me know how it goes.
Click to expand...
Click to collapse
Thank you it work perfct!
Hi,
Now that nougat update has just got out, do you think root will still work?
tryed with nougat update and rooted fine
Hello where can i find a nougat preview rom for the ulefone gemini thanks!
Christianihechi said:
Sorry about that. You can use the recovery here if you haven't successfully rooted your Ulefone Gemini.
http://www.needrom.com/download/twrp_310/
Flashing is via SP Flashtool. Let me know how it goes.
Click to expand...
Click to collapse
I've flashed this recovery via SP Flash Tool but when I try to turn on the smartphone in recovery mode the OS gets booted. If I try to use adb reboot recovery I only get a dead droid with the no command prompt. What am I doing wrong?
EDIT: nvm changing SP Flash Tool version did the trick
Christianihechi said:
Sorry about that. You can use the recovery here if you haven't successfully rooted your Ulefone Gemini.
http://www.needrom.com/download/twrp_310/
Flashing is via SP Flashtool. Let me know how it goes.
Click to expand...
Click to collapse
Hai Bro,i m using a china unbranded phone mtk 6737T android 6.01+ and can i use this recovery to sp flash to root my phone ? Thank.
So i manage to get the perfect rom for my needs, with everything working flawless on a TX3 Max.
I just needed to patch magisk to be able to get a valid Play protect certification.
As soon as i flashed the box with the patched recovery i lost the front LED with the clock, and was going to try flash the CLOCK FIX from other TANIX roms on TWRP and see if it would work
It was when i realised i couldn´t acceess recovery from anywhere . Tried holding the reset button, recovery reboot from ADB, reboot recovey apps even from TWRP official app with no luck, allways boot straight to ATV.
Allso tested to enter fastboot or botloader, as this video shows, to try to sideload TWRP, but it seems these boxes don´t work that way:
The question is, is the recovery completely wiped? or is it hidden somewhere, and how can I access it?
And if someone hasa better suggestion on how to get a valid Play protect certification I would be glad to test it.
Tks everyone
have u solved it now?
oldman20 said:
have u solved it now?
Click to expand...
Click to collapse
No, searched everywhere, no answers , and ended up flashing another rom from Aiden, and lived with no root, but play protected.