Hi, currently i just flash crdroid into my old i9300, but after flash i cant flash gaaps using twrp.
Whenever i try to open gaaps zip file from twrp, it return to main twrp menu. Anyone can help me?
And after i flash crdroid 7.1.2 without gaaps, my phone lock on (D carrier). But my sim are (A carrier). Why?
Sorry if i created double post but i try search Google fews hours still cant find any solution.
Please help.
Have you done clean install of both? are your gapps compatible? (it should be ARM 7.1) About the network lock try different modem. And what about other roms like ressurection remix?
McXred said:
Have you done clean install of both? are your gapps compatible? (it should be ARM 7.1) About the network lock try different modem. And what about other roms like ressurection remix?
Click to expand...
Click to collapse
I downloaded crdroid 7.1.2, but gaaps until 7.1 only.
Can you please guide me to do a clean install?
I havent try other rom bcz i try download ressurectio. Remix but the link was down.
Related
Hello guys, I am a newbie to this forum(been following it for a long time and finaaly decided to join)
Anyways,
I am using a rooted moto e with twrp 2.7.2.0.
My problem is that when I flash this stock rom flashable zip(optimised version)
http://forum.xda-developers.com/moto-e/development/flashable-zip-stock-deodexed-rom-moto-e-t2823368
it flashes fine.But after clean flashing this rom, when I try to flash PA Gapps it throws an error which says
"INSTALLATION FAILURE: PA GApps can only be installed on top of an existing
PA GApps installation. Since you are currently using another GApps package, you
will need to wipe (format) your system partition before installing PA GApps"
This is happening for this file pa_gapps-modular-mini-4.4.4-20141121-signed.
It worked fine with previous versions of PA Gapps.I have attached the log file below.
Please help.
Why are you flashing gapps on a ROM that already has the playstore?
Sent from my XT1023
it will not work...as stock rom already have a gapp package
alex_is_the_1 said:
Why are you flashing gapps on a ROM that already has the playstore?
Sent from my XT1023
Click to expand...
Click to collapse
Just to update all Google applications to the latest version.
dchatterjee172 said:
it will not work...as stock rom already have a gapp package
Click to expand...
Click to collapse
Let me see flashing older gaaps versions. Yup i tried with an older version which is not gaaps 2.0
pa_gapps-modular-mini-4.4.4-20141110 and this worked. Maybe its a problem with latest gaaps package.
Hi all, i have a problem with my device, i'ts a KIW-L21
I flashed TWRP 3.0.0.0, and CyanogenMod 13.0 (this rom http://forum.xda-developers.com/hon...-unofficial-cyanogenmod-13-0-nightly-t3344499 )
I would like flash Gapps pico with arm64 and 6.0
Ok, but wen i flash this one, nothing is happening
i test with a other rom, such, impossible nothing is happening
I tried to flash twrp 3.0.2.0, it's ok for installalation, but nothing is happening for flash gapps or other rom
So, i'm blocked in this rom and impossible to flash a gapps or other rom
please help me ..
Sorry for my language i'm french and i have school level
you unlocked the bootloader? Because I just unlocked it, installed TWRP and CM13 with Nano Gapps
yes
We are compelled to unlock the bootloader, so, yes i unlocked this
You have to wipe data then flash another
Can you post screenshot after gapps flashing ?
Sent from my KIW-L21 using Tapatalk
Hi everyone. I was read a lot off discussions about i9100 with CM12.1 but I still don't know how to do it without some problems.
My phone actually running CM13.1 latest nightly build with Team Win TWRP recovery v 2.8.XXX and maybe DorimanX kernel? I don't know how to find Kernel name and version... I would like to ask you how to go to Cm12.1 build with pico or nano GAPPS (And what build I should download). I need the most stable build for daily use. Next how to replace CM recovery with TWRP 3.0.2. . I am totally confused. I'll be glad for any help.
Oh. I have that problem too. CM 13.1 not stable!
Jaccob25 said:
Hi everyone. I was read a lot off discussions about i9100 with CM12.1 but I still don't know how to do it without some problems.
My phone actually running CM13.1 latest nightly build with Team Win TWRP recovery v 2.8.XXX and maybe DorimanX kernel? I don't know how to find Kernel name and version... I would like to ask you how to go to Cm12.1 build with pico or nano GAPPS (And what build I should download). I need the most stable build for daily use. Next how to replace CM recovery with TWRP 3.0.2. . I am totally confused. I'll be glad for any help.
Click to expand...
Click to collapse
Firstly look under settings -> about device and it will tell you the kernel version. If it says 3.0.101-CM------, you have the stock CM13 kernel. You said you have TWRP 2.8.x.x and not CM recovery?? This means you already have the isorec recovery enabled. All you need to do is flash the 3.0.2-1 .img from this recovery and you will have the newer one installed. And just do normal backup/wipes and install CM12.1 as you would any other rom. Just remember to use 5.1 gapps(arm;5.1;pico/nano)
Here is the last official CM12.1 I uploaded
Here is a more up to date unofficial CM12.1
noppy22 said:
Firstly look under settings -> about device and it will tell you the kernel version...
Click to expand...
Click to collapse
Yes I have stock cm13 kernel and TWRP flashed. Can I flash new TWRP via Odin?
Thank you very much!
Jaccob25 said:
Yes I have stock cm13 kernel and TWRP flashed. Can I flash new TWRP via Odin?
Thank you very much!
Click to expand...
Click to collapse
I don't think you can flash a .img file with odin. Honestly if you want to downgrade to 5.1.1 it would be easier to do it in one go.
Flash CM12.1, gapps, then TWRP 3.0.2-1.img all from TWRP 2.8
noppy22 said:
I don't think you can flash a .img file with odin. Honestly if you want to downgrade to 5.1.1 it would be easier to do it in one go.
Flash CM12.1, gapps, then TWRP 3.0.2-1.img all from TWRP 2.8
Click to expand...
Click to collapse
Ohh I thought that TWRP can't flash img file.
Thanks for advice. I try it today.
So I try that and almost everything works fine. Only GPS fixing seems like a little bit problematic. But I don't know my testing was short. I will see.
May I ask a supplementary question - I am in a similar position, I have an i9100 which I upgraded from stock 4.1.2 Jelly Bean to CM13 following (most of) djibe's guide here
So I now have CM13 ROM with kernel version 3.0.101, re-partitioned with Lanchons repit, and with recovery TWRP 3.1.0 installed and functioning.
I want to revert from CM13 to CM12.1. From above, I believe that I can simply backup, wipe, then flash the CM12.1 ROM (I'll be using the last nightly, cm-12.1-20160203-NIGHTLY-i9100.zip) - is that correct?
My question/confusion is, do I also need to flash an isorec-compatible kernel (ie kernel-Lanchon-TRIM-IsoRec-20160111-cm-12.1-i9100.zip)? The isorec thread (here) says that the "Official CyanogenMod 12.1 and 13 kernels are now IsoRec-compatible", so it seems to me unnecessary, but many threads/guides on XDA say to flash one of Lanchon's kernels.
Please could someone advise, and my apologies for what is probably an ignorant question.
teraghik said:
May I ask a supplementary question - I am in a similar position, I have an i9100 which I upgraded from stock 4.1.2 Jelly Bean to CM13 following (most of) djibe's guide here
So I now have CM13 ROM with kernel version 3.0.101, re-partitioned with Lanchons repit, and with recovery TWRP 3.1.0 installed and functioning.
I want to revert from CM13 to CM12.1. From above, I believe that I can simply backup, wipe, then flash the CM12.1 ROM (I'll be using the last nightly, cm-12.1-20160203-NIGHTLY-i9100.zip) - is that correct?
My question/confusion is, do I also need to flash an isorec-compatible kernel (ie kernel-Lanchon-TRIM-IsoRec-20160111-cm-12.1-i9100.zip)? The isorec thread (here) says that the "Official CyanogenMod 12.1 and 13 kernels are now IsoRec-compatible", so it seems to me unnecessary, but many threads/guides on XDA say to flash one of Lanchon's kernels.
Please could someone advise, and my apologies for what is probably an ignorant question.
Click to expand...
Click to collapse
You are correct. Isorec support was implemented before that last nightly iirc. No need to flash any kernels.
Note: Only use the official TWRP 3.1 from the TWRP website or the.gangster's one which is basically the same. They are compatible with the earlier android versions.
Hi Noppy,
Thanks very much for taking the time to reply and help - I am using "the gangsters" TWRP 3.1 from djibe's thread, appreciate the heads up. I can confirm that I flashed CM12.1, and it works fine!
Why don't you follow my tutorial to get the perfect smooth Android 7.1 for SGS2 ?
Here it is : https://forum.xda-developers.com/galaxy-s2/help/guide-tutorial-samsung-galaxy-s2-i9100-t3538601
I was wondering if someone could clarify if dirty flashing a cm13 upgrade (nightly) you can also flash new gapps, or if based on the recommendation below that can only be done on first cm flash from stock.
Anyone ever done this or it just is not useful /should not /cannot be done?
"Note: In case you want to use any gapps, YOU MUST install the right gapps the first time that you flash a marshmallow ROM. Do not boot with an older gapps or without one and then try to install it later."
Thanks!
Yes you can flash new gapps after dirty flashing CM13. But I don't know why anyone would do that since CM13 has gapps persistence between dirty flash.
Pixel launcher as system app got me wondering about this!
Thanks!
xskull03 said:
Yes you can flash new gapps after dirty flashing CM13. But I don't know why anyone would do that since CM13 has gapps persistence between dirty flash.
Click to expand...
Click to collapse
AGREE !~:good:
do whatever , but remember,
DO NOT TURN ON THAT "UPDATE CYANOGEN RECOVERY" OPTION, which erases twrp ,
and too many ppl complain about stuck in cm recovery after ota,, remember that..
Thanks for that!
Don't even know where that is.
Will look for it!
jvc73 said:
Thanks for that!
Don't even know where that is.
Will look for it!
Click to expand...
Click to collapse
It's in Developer Options.
Sent from my Galaxy Tab 3 using XDA Labs
Hi i have a problem, when i install custom rom for example. rr 5.8.3 on 7.1.2 when i boot phone and i have screen welcome and i start configuration and this configuration crashed, i install with wipe, and i install new nitrogenos and i have the same situation. When i install rom on 7.1.1 all its ok, what can i do to fix it? Please help me its screen from phone http://imgur.com/a/uUPls
You might be using an outdated GApps package, as it is known to cause this issue. Try with the latest opengapps.
jayaram95 said:
You might be using an outdated GApps package, as it is known to cause this issue. Try with the latest opengapps.
Click to expand...
Click to collapse
Yea i install old version gapps and i dont have any problems on 7.1.1, hmm then i must install new gapps if i check i will write
;P
You can flash newer gapps from here.
OR
You can follow this guide on older gapps.
Very thanks, i have one question, i must install firmware to install rom for example rr or nitrogen? i never install and everything is right
Okay i install beansgapps and its works Thanks for help
badamczuk1 said:
Very thanks, i have one question, i must install firmware to install rom for example rr or nitrogen? i never install and everything is right
Click to expand...
Click to collapse
no need to flash it if there's nothing wrong
if there's something wrong, try to flash latest MIUI Beta firmware, you can find it in ROM section, and no need to flash it everytime you flash a new ROM, just flash it once and you're good to go