Related
Basic device info
Model Number : PB1009
Android Version : 7.0
Kernel Version: 4.4.22
Build Number : PB1009_20170912
Hey so i need literally any way to root this tablet, ive been able to unlock the bootloader (easiest bootloader on the planet) but havent been able to find a compatable twrp.
i just need a custom recovery that will work or p much any root ideas, i would consider a full custom firmware as well.
i considered compiling a twrp but i dont know how i would get the source files for it...
Kenvarus said:
Basic device info
Model Number : PB1009
Android Version : 7.0
Kernel Version: 4.4.22
Build Number : PB1009_20170912
Hey so i need literally any way to root this tablet, ive been able to unlock the bootloader (easiest bootloader on the planet) but havent been able to find a compatable twrp.
i just need a custom recovery that will work or p much any root ideas, i would consider a full custom firmware as well.
i considered compiling a twrp but i dont know how i would get the source files for it...
Click to expand...
Click to collapse
how did you unlock bootloader and did you ever figure out how to root it? going through same thing now.
Kind of an old thread and old device now, but I own one myself (branded Packard Bell) and just figured this all out, so here goes:
Root
This one is really easy now thanks to a MediaTek flaw. Just go to https://github.com/JunioJsv/mtk-easy-su, download the latest release, install the APK on the device, and run it by opening the app and pressing the button in the lower-right corner (still works on this since the latest security patch level AFAIK is from 2017). Note that this gives root temporarily, so you will need to run it again after reboot if you want root again.
Bootloader Unlock
When Kenvarus said "easiest bootloader on the planet", I took a guess at the method and it worked:
Back up any important data on your tablet, as this will factory reset it.
Install ADB and Fastboot on your computer if they are not installed, including drivers. For Fastboot (as that can be tricky sometimes), it "just worked" for me and I think Windows used an Amazon driver I had installed for my KF2. YMMV.
If you haven't already, enable Development Settings by going to Settings->About tablet and tapping the build number 7 times.
Go to Settings->Developer options (switch them on if they're off) and enable the "OEM unlocking" toggle.
In the same menu, enable "USB debugging" if it is not enabled already.
Connect the tablet to your computer, confirming the authorization prompt that pops up if it wasn't connected before. Check whether the connection is good with the "adb devices" command if needed.
Run the command "adb reboot bootloader", this gave me a blank screen.
Use the "fastboot devices" command to make sure the Fastboot connection works.
Run the command "fastboot oem unlock".
Press Volume Up when the text-mode confirmation screen pops up on the tablet.
Once the unlock procedure is complete, reset the tablet. You should see text on your bootscreen saying "Orange State" and a factory reset on the first reboot if it worked.
WARNING: I highly recommend charging your battery to be at least 10-20% filled before doing this. I stupidly did this at 1% battery thinking "it's plugged in anyway" and had quite the time rebooting after unlocking the bootloader (I thought it was bricked for a good hour or so, only after walking away for 20 minutes to eat dinner did I see that the battery was now at 20% and I could boot the tablet).
After unlocking the bootloader and temp-rooting it with the above app, I was able to use Magisk to patch the boot image (using dd to shuttle the files to and from /dev/block/mmcblk0p10, use "strings saved_boot_partition_name|head -n1" and check for "ANDROID!" to make sure it's the right partition) and I now have persistent root after all these years (note that Direct Install in Magisk doesn't work here). I'd definitely be interested in a custom recovery and/or ROMs for this device, but I'm not holding my breath (I'd take a crack at it if I knew better how to do it, but I have near-zero experience with ROM development and so far have only recompiled existing ROMs for a few phones).
I'm planning to use a low-cost tablet for a wall mounted home automation display. For this use I have bought an rather unkown but very affordable tablet from SPC (Smart Products Connection) (Model Heaven 10.1) running on Android 7.0 with kernel-version 3.10.65. To unlock features I need for a wall mounted display (e.g. always on, controlling the charging of the battery to enhance battery lifetime, adjusting the tablet time automatically through my local network timeserver etc. etc.) I need the device unlocked. I followed the nice description in the Forum Hovatec (<https://>forum.hovatek.com/thread-1405.html) to get into custom recovery mode and make a stock boot image but I got stuck at the step where the tablet should boot into recovery since fastboot is not able to connect to the tablet. Thus I assume that I cannot unlock the bootloader of the device. The applications like King Root, KingoRoot and the like do not seem to find a software exploit to help out here either (most probably of the uncommon model I use) and OneClickroot wants to have a premium for unlocking it (the app claims that it can do it but I'm very reluctant to pay 30-50$ to unlock a tablet which I already have bought, to a very shady company...
So I hope that someone here has already experience with my tablet model and may help out with a description how to:
1.) Get to unlock the bootloader
2.) Get a stock boot image
3.) Unlock the device
4.) Or have a software exploit to unlock the tablet online
?
As in the title, I have an, Alcatel Tcl Lx A502dl, Android phone, originally purchased from Walmart with a Trackfone Sim card (Now there is no sim card insterted).
I have spent all day, up until now, figuring out how to link abd and fastboot to the phone using USB debugging, and I have been successful this far. I had downloaded latest "platform-tools_r29.0.1-windows" from here on XDA, and I downloaded latest "fatsboot" from "HighonAndroid.com", for a quicker experience, without wasting time and effort on Java downloads. In addition to all this, I let the computer search the network for updating driver software, for my Alcatel phone. I also downloaded "UniversalAdbDriverSetup", from the former link, @highonandroid.com.
I linked both file pathways for corresponding "Fastboot", and "platform-tools", into the environment variables, under the term: "Path", yes, using a ";" with no spaces to add the new pathways.
I had success linking my phone onto the "abd" program, the phone is listed under "abd devices" command. I could not seem to get a listing of my phone serial number, under the "fastboot devices" command?
I have tried to get "platform-tools" to put the phone into "fastboot/bootloader" mode, but the phone simply reboots, back to the lockscreen. I have also tried on "Fastboot", to "fastboot reboot bootloader", and my Alcatel again reboots to the lockscreen. All the while, I activated the OEM unlocking switch/setting in the "developer options" of my phone, from the beginning, before I ever gave any commands?
Why won't my Alcatel phone reboot into the "fastboot/bootloader" screen, where I could command "fastboot oem unlock"? Why does my phone respond to both programs, yet still she loads the lockscreen?
I am new to all this, not really a tech savvy individual, just wanted a liberated operating system for my line of work...
I need bootloader unlocked in order to root my device via computer, correct?
I can not check to see if my bootloader is unlocked, not by abd tools, or by numerical code in my "dialer app". The app crashes, and any time I attempt the "fastboot oem device-info" command, no device is listed, only a <looking for a device> prompt of sorts appears. I have been told this may be because, the drivers were not installed properly, or the device was not properly connected under some other issue, and I can try to fix this error by reinstalling drivers... what would the issue be?
I need help, and I would appreciate some guidance on rooting my Android, as there are not any threads in the forum, on this model of Alcatel, that I am aware of?
I am doing all of this on a Windows 7 computer, in a Library, just so you all know. I ask for administrative approval for most things.
Thank you.
tcl trackfone
Hello i was wondering if you ever got your phone rooted?
me to i have that problem on my tcl lx
to
Temporary mtk- root. Use init.d for always root
Sonjouten said:
Temporary mtk- root. Use init.d for always root
Click to expand...
Click to collapse
I can't possibly express how much I would love for you to elaborate on the 'use init.d for always root' part. Anyone else who knows, please jump in. Start by pretending I am an idiot. Then stop pretending and explain it to me as if I were an adult who needs a full-time minder. First one to help me achieve "always root" on this terrible, wretched, little excuse for an electronic device gets my undying gratitude and um, maybe some Google Play money? I am open to ideas here on that score. To reiterate, need help rooting my Tracfone TCL LX A502DL that has a castrated recovery (seriously, you can't flash anything from adb, the option is flat-out missing) and apparently no fastboot access AT ALL. I could do another seriously in parentheses, but you need to take my word for it w/o a bunch of examples. The bright spot is the vulnerability the device has to the mtk-su exploit. Get a # in like no time at all. Time elapsed from executing the file to getting the prompt is too short for my flesh computer to register (unless you -v, then about 1.5 seconds.) So how do I turn a root prompt into full root?
I can't possibly express how much I would love for you to elaborate....
Click to expand...
Click to collapse
WHAT HE SAID
+1
X2
etc
Thank you, H
Did he get that?
So did he earn that Google Play Store money or was he just full of it?
Just bumping this thread in case anyone has ideas for me. Seems like Alcatel has bootloader mode hidden on some phones. Here's my story: https://forum.xda-developers.com/showthread.php?p=81780645#post81780645
BTW - I am using mtk-su and have root and Magisk via init.d scripts, but still can't touch /system or flash recovery because of
Code:
/dev/block/dm-0' is read-only
which won't change unti bl unlocked...
I never did get her to root. Alas she is a broken phone now RIP. Sorry for the disappointments. But I move on more hopeful. ?
As posted by Viva La Android in another thread about the tcl a501dl:
The TCL A1 (A501DL) cannot be bootloader unlocked. Although the OEM Unlocking option can be enabled in the Developer Options menu, fastboot mode has been made inaccessible by TCL. Because the bootloader cannot be unlocked, it simply is not possible to flash a custom recovery or a patched boot image for systemless root support. System-wide root is not possible due to TCL's secure boot chain configuration and dm-verity. Until an exploit is found to bootloader unlock this device, rooting is not possible.
Click to expand...
Click to collapse
levone1 said:
Just bumping this thread in case anyone has ideas for me. Seems like Alcatel has bootloader mode hidden on some phones. Here's my story: https://forum.xda-developers.com/showthread.php?p=81780645#post81780645
BTW - I am using mtk-su and have root and Magisk via init.d scripts, but still can't touch /system or flash recovery because of
Code:
/dev/block/dm-0' is read-only
which won't change unti bl unlocked...
Click to expand...
Click to collapse
I have tried everything, and can't even get temporary root on my A502DL. How did you do this, if you don't mind? Thanks!
fliproc said:
I have tried everything, and can't even get temporary root on my A502DL. How did you do this, if you don't mind? Thanks!
Click to expand...
Click to collapse
Sorry, I honestly don't remember now - I just happened to have tje phone for a short time at that moment, so I was messing around with it... I remember there was nothimg special about it. I jist followed the instructions from the mtk-root thread and it worked.
Amazing Temp Root for MediaTek ARMv8 [2020-08-24] | XDA ...
Braadleyah said:
As in the title, I have an, Alcatel Tcl Lx A502dl, Android phone, originally purchased from Walmart with a Trackfone Sim card (Now there is no sim card insterted).
I have spent all day, up until now, figuring out how to link abd and fastboot to the phone using USB debugging, and I have been successful this far. I had downloaded latest "platform-tools_r29.0.1-windows" from here on XDA, and I downloaded latest "fatsboot" from "HighonAndroid.com", for a quicker experience, without wasting time and effort on Java downloads. In addition to all this, I let the computer search the network for updating driver software, for my Alcatel phone. I also downloaded "UniversalAdbDriverSetup", from the former link, @highonandroid.com.
I linked both file pathways for corresponding "Fastboot", and "platform-tools", into the environment variables, under the term: "Path", yes, using a ";" with no spaces to add the new pathways.
I had success linking my phone onto the "abd" program, the phone is listed under "abd devices" command. I could not seem to get a listing of my phone serial number, under the "fastboot devices" command?
I have tried to get "platform-tools" to put the phone into "fastboot/bootloader" mode, but the phone simply reboots, back to the lockscreen. I have also tried on "Fastboot", to "fastboot reboot bootloader", and my Alcatel again reboots to the lockscreen. All the while, I activated the OEM unlocking switch/setting in the "developer options" of my phone, from the beginning, before I ever gave any commands?
Why won't my Alcatel phone reboot into the "fastboot/bootloader" screen, where I could command "fastboot oem unlock"? Why does my phone respond to both programs, yet still she loads the lockscreen?
I am new to all this, not really a tech savvy individual, just wanted a liberated operating system for my line of work...
I need bootloader unlocked in order to root my device via computer, correct?
I can not check to see if my bootloader is unlocked, not by abd tools, or by numerical code in my "dialer app". The app crashes, and any time I attempt the "fastboot oem device-info" command, no device is listed, only a <looking for a device> prompt of sorts appears. I have been told this may be because, the drivers were not installed properly, or the device was not properly connected under some other issue, and I can try to fix this error by reinstalling drivers... what would the issue be?
I need help, and I would appreciate some guidance on rooting my Android, as there are not any threads in the forum, on this model of Alcatel, that I am aware of?
I am doing all of this on a Windows 7 computer, in a Library, just so you all know. I ask for administrative approval for most things.
Thank you.
Click to expand...
Click to collapse
I have heard elsewhere that it's not possible to unlock the bootloader of a Tracfone. Sorry. But at least we know why Tracfones are sold for so cheap lol
$cronos_ said:
I have heard elsewhere that it's not possible to unlock the bootloader of a Tracfone. Sorry. But at least we know why Tracfones are sold for so cheap lol
Click to expand...
Click to collapse
unlock bootloader and root with https://github.com/bkerler/mtkclient
This device cannot be rooted. To date, there has not been a single validated claim of a rooted TCL A509DL. The bootloader cannot be unlocked, preventing root, custom ROM installs,etc.
UPDATE: After hearing from some members regarding the Hydra Tool, and doing a little bit of research on the method, it appears that I was completely wrong on my.statement. Members here on XDA as well as Hovatek have confirmed that the A509DL bootloader can indeed be exploited with the Hydra Tool method, opening the door to systemless root with Magisk. Thanks guys for the info and guidance. I have one of these devices and look forward to unlocking & rooting soon. Thanks @PrivyetCyka for the info.
Yes it can .. it was extremely easy to do so also..i have a rooted one in my hand as we speak the only issue is I was stupid and tried to flash the magisk zip in twrp and it set off secureboot so in working on fixing that .. but .. if you just use MTKClient you can pull the entire firmware , magisk patch then reflash the boot.img using the same tool and you can even install twrp I have the entire firmware , twrp, and magisk patched boot imgs for the device saved ,. If someone knows how to disable secureboot I would really appreciate it
Viva La Android said:
This device cannot be rooted. To date, there has not been a single validated claim of a rooted TCL A509DL. The bootloader cannot be unlocked, preventing root, custom ROM installs,etc.
Click to expand...
Click to collapse
I sure would like to give it a whirl, but I haven't had that phone in over a year
Anyway, I decided to stop buying devices made deliberately less functional by their manufacturers.
PrivyetCyka said:
Yes it can .. it was extremely easy to do so also..i have a rooted one in my hand as we speak the only issue is I was stupid and tried to flash the magisk zip in twrp and it set off secureboot so in working on fixing that .. but .. if you just use MTKClient you can pull the entire firmware , magisk patch then reflash the boot.img using the same tool and you can even install twrp I have the entire firmware , twrp, and magisk patched boot imgs for the device saved ,. If someone knows how to disable secureboot I would really appreciate it
Click to expand...
Click to collapse
I stand corrected on my statement. I was incorrect. Out of curiosity, does the Hydra tool require the dongle in order to unlock the bootloader?
@PrivyetCyka send me the Magisk packed boot image and I will unpack it and disable secure boot. I can then pack it back up and link it to you. Are you referring to only secure boot or also AVB 2.0/dm-verity?
I didn't use hydra tool I used MTKClient from GitHub and did an entire system read back to have a backup then just renamed boot.bin to boot.img used magisk to patch it and then used the same MTKClient tool to reflash it... I have a twrp I made for it also but I don't know how functional it is as far as flashing things and backups , the only thing I tried to flash was the magisk zip just to see what would happen and that tripped the secureboot , I used the mediatek secureboot tool and it says it's disabled but it's still not booting past the secureboot fail screen.. when I get home I'll get the files and upload them tonight
Hello guys !
I recently bought an Archos Core 101 3G Ultra, with Android 9 Pie.
My objective was to install a GNU/Linux Debian threw the SDE bootloader.
I'm new to this game, but I'm quite persistent. Sadly, all the documentation I can find is largely outdated (Including here. ).
I spent a lot of hours searching, and learned a lot of thing, but I'm finally stuck, and need help.
Actually, everything is damned locked. I think the problem comes more from Archos firmware than Android itself.
I did activate developer settings in Android, checked usb-debugging, oem-unlock and reboot (several times), but it seems not passed to lower software layers.
Besides, when I reboot Android, he tells me he could'nt update settings.
When I go to recovery (Vol + & power), device is unauthorized for adb, and invisible to fastboot (Even after declaring udev rules on my desktop. ).
But if I boot Android, adb works, and if I send "adb reboot bootloader" command, I can see my device in fastboot opened this way.
But I can't execute anything : he always sends me "command unknow" error message.
So no "fastboot oem device-info", neither "fastboot oem unlock" or "fastboot oem unlock-go". I tried "adb root" but without success. When I do "abd shell", most folders are forbidden to me : no mv, no mkdir, not even ls.
I tried to follow several unlock/root tutorials, including the two ones we can find here for Archos gen 9 :
https://forum.xda-developers.com/showthread.php?t=1542058
https://forum.xda-developers.com/showthread.php?t=1653566
But for all the reasons detailed above, they are impossible to archieve (Can't push anything for example).
Anyway, when I do "fastboot getvar-all", I can see my bootloader is locked and protected.
Any idea ?
Days of searching, and one hour after finally deciding to ask question, situation evolves.
Well... seems was bad command : not "fastboot oem unlock", but "fastboot flashing unlock". Bootloader unlocked, Android wiped.
But I'll see next later : I'm frackin' tired, need gaming !
Well well well... unlocking boot loader did not change anything.
I can't install TWRP : no working release for my device.
I tried to play it hard with Magisk : no A/B but system root install. But they soon ask me to extract and modify my recovery partition.
Impossible : I don't have access to such folders.
Seems my device is too recent, or maybe not known enough so I can find stock images on Internet.
Well I'm stuck.
Any idea before I break the tablet into smal pieces on my desk (Or offer it to my mother : she will be satisfied with android... ) ?
To be more acurate (Even if I doubt it will change anything. ) : if anybody has an Archos Core 101 3G Ultra recovery stock IMG, I'd be grateful =D...
Hi! My name is Bautista.
This is my first post well explained, I already asked this question before but I did not express myself well (I hope to do it correctly in this attempt)
My problem happens with my Samsung Galaxy A01 SM-A015M, Running on OneUI 2.0/Android 10 with 2gb of ram, a Snapdragon 439, the stock rom/firmware and 32GB of storage, from Argentina.
Things I tried so far, and didn't work for me:
Unlocking the bootloader by following the Gearallnews and Cyanogenmods guides to the letter.
When trying to unlock the bootloader with the guides on the aforementioned pages, when starting the device a sign should appear saying that the bootloader is unlocked, which did not appear.
The device started correctly in the process to configure the device the first time it is turned on, connect the wifi as the guides said. Followed by that I went to the developer options and the option "Oem unlock" was still activated and in blue (which should not happen, it should appear grayed) I heard that some Samsung devices with snapdragon processors had a bootloader that cannot be unlocked
Unlocking the bootloader using ADB AND Fastboot. (ADB detects my device fine, but fastboot doesn't detect it at all)
Using Fastboot from Windows 7, Windows 10, and Kali Linux.
Installing TWRP.
Use rooting apps. (the ones that appear on the XDA rooting page)
What I am going to with this thread, is:
Can my device's bootloader be unlocked? And if so, how?
If the bootloader cannot be unlocked, how can I root or install TWRP?
Please, if you don't understand something or need more information, let me know by replying to this thread or sending me a private message.
Look inside here.
jwoegerbauer said:
Look inside here.
Click to expand...
Click to collapse
it's the same as Gearallnews and Cyanogenmods guides, i already did that, it dont work
Like the original poster I also have a Samsung Galaxy A01 SM-A015M/DS, OneUI 2.0/Android 10, 2GB ram, 32GB storage, Snapdragon 439, stock firmware (TPA) Panama. I have gone through all the aforementioned procedure and the bootloader does not unlock. There is no bootloader unlock warning on reboot and the OEM Unlock in developer option does not grey out. Does the Snapdragon processor not allow bootloader unlock or is anyone aware of a solution. Thanks for any assistance.
@mullerh
If in Settings -> Developer Option the option "OEM unlock" is present then unlocking the bootloader obviously isn't denied by OEM/Carrier.
But you can check it at your own:
Code:
adb devices
adb shell "getprop ro.oem_unlock_supported"
jwoegerbauer said:
@mullerh
If in Settings -> Developer Option the option "OEM unlock" is present then unlocking the bootloader obviously isn't denied by OEM/Carrier.
But you can check it at your own:
Code:
adb devices
adb shell "getprop ro.oem_unlock_supported"
Click to expand...
Click to collapse
Thanks for your response and assistance. The command:
adb shell "getprop ro.oem_unlock_supported" returns a 1
I googled it but found no clarification but I assume that means it is supported.
Therfore there is something else that is blocking the bootloader from unlocking from the unlock mode screen and just prior to reset.
There is also no unlock bootloader warning during the reset.
The more I have Googled this problem the more it seems to indicate that many newer Samsung phones released in North/Latin America with Qualicom Snapdragon 439 processors, have the the bootloaders locked down with a new "security" feature called SecureBoot. Would be interested in getting the experience of others. Thanks
mullerh said:
Thanks for your response and assistance. The command:
adb shell "getprop ro.oem_unlock_supported" returns a 1
I googled it but found no clarification but I assume that means it is supported.
Therfore there is something else that is blocking the bootloader from unlocking from the unlock mode screen and just prior to reset.
There is also no unlock bootloader warning during the reset.
The more I have Googled this problem the more it seems to indicate that many newer Samsung phones released in North/Latin America with Qualicom Snapdragon 439 processors, have the the bootloaders locked down with a new "security" feature called SecureBoot. Would be interested in getting the experience of others. Thanks
Click to expand...
Click to collapse
Hi! Did you manage to find a way to unlock the bootloader?
I have not been able to unlock the bootloader on this SM-A015M/DS (Latin American) model with Snapdragon processor. I have done a lot of searching but found little info except articles stating Samsung had gone through some extra effort to secure their latest phones. That also means I can not root it. I was hoping to get some feedback from other who may have had a better experience,
have you tried using the twrp app to install twrp?
i had an old galaxy grand prime which was impossible to unlock, but the app worked without issues
the only thing i had to pay attention is to turn it off right before ir reboots after installing and then loading into recovery
letting the mobile startup without doing this overrieded the command to install twrp
Thanks for your response. It is my understanding (I could be wrong) that before TWRP can be installed the Bootloader needs to be unlocked. The older Samsung usually allowed the Bootloader to be unlocked even if there was difficulty in rooting them. It appears that some of the newer Samsung's with the Snapdragon processors have added an additional security feature called SecureBoot which blocks the Bootloader from being unlocked.
Does anyone have a definitive answer for how to turn the bootloader on? I recently purchased a SM-A015M/DS and didn't have issues with the OEM bootloader option appearing in the options. But when I enter fastboot mode it says my device status is locked. I can't work out if that means it's locked or not.
For what it's worth, when I flashed the firmware onto the phone in the first place, I had to enable the developer option manually- I did this by booting into download mode and then a long press on the volume up button when prompted by the menu. I don't see why this wouldn't work for other devices. There are youtube videos that explain in greater detail if you haven't tried this yet.
Newiser7 said:
Does anyone have a definitive answer for how to turn the bootloader on? I recently purchased a SM-A015M/DS and didn't have issues with the OEM bootloader option appearing in the options. But when I enter fastboot mode it says my device status is locked. I can't work out if that means it's locked or not.
Click to expand...
Click to collapse
Enabling OEM unlock option in Developer options does NOT UNLOCK the bootloader. Once you enable the OEM unlock on your device, the unlock ability flag is set to 1, which will allow users to use the fastboot flashing unlock command, the command what starts the "unlocking the bootloader" procedure.
FYI:
After the command is executed, you will see an option for bootloader unlock on your device’s screen.
Use the volume buttons to move up and down and select the option to unlock the bootloader.
A prompt will pop up, asking for confirmation. Use the power button to confirm your selection as yes, and you are done.
The phone will now reboot to fastboot mode. Enter the command “fastboot reboot,” and it will boot into PC.
jwoegerbauer said:
Enabling OEM unlock option in Developer options does NOT UNLOCK the bootloader. Once you enable the OEM unlock on your device, the unlock ability flag is set to 1, which will allow users to use the fastboot flashing unlock command, the command what starts the "unlocking the bootloader" procedure.
FYI:
After the command is executed, you will see an option for bootloader unlock on your device’s screen.
Use the volume buttons to move up and down and select the option to unlock the bootloader.
A prompt will pop up, asking for confirmation. Use the power button to confirm your selection as yes, and you are done.
The phone will now reboot to fastboot mode. Enter the command “fastboot reboot,” and it will boot into PC.
Click to expand...
Click to collapse
FYI:
Samsung devices do not support fastboot command, you use Odin or Heimdall to flash what you need.
The answer you provide is misleading
mullerh said:
FYI:
Samsung devices do not support fastboot command, you use Odin or Heimdall to flash what you need.
The answer you provide is misleading
Click to expand...
Click to collapse
You are right: I was mistaken.
Thank you for clarifying that the bootloader is still locked. But how can I unlock it? Odin will let me flash the files, but I keep getting AUTH errors when I try to flash magisk patched files to root the phone. I'm assuming this is because the bootloader preventing the files from transferring. Is there a way to unlock it using ADB without fastboot, or a way using Odin? It seems crazy that unlocking the bootloader is enabled but I am still unable to actually unlock it.
I have also tried the CROM Service app (couldn't get it to install on my phone, error 3003 with ADB install), as well as the bootloader unlock method where I boot into download mode, hold the volume up key, and unlock the bootloader that way. I have done the latter at least 5 times and the bootloader is still locked. Ridiculous.
This prop apparently only confirms that the phone supports being unlocked, not that it is actually unlocked.
adb shell "getprop ro.oem_unlock_supported"
Check a few others, also see the official docs.
sys.oem_unlock_allowed
androidboot.flash.locked (the docs say this, but I think Samsung uses something different)
ro.boot.flash.locked
ro.boot.other.locked
Maybe also check these:
ro.boot.verifiedbootstate
ro.boot.veritymode
The docs indicate that the verifiedbootstate should be orange if the bootloader is unlocked. I don't know much about it, though.
You can always use grep to search for any interesting values, like "lock" or "boot" or "flash":
adb shell getprop | grep lock
adb shell getprop | grep boot
adb shell getprop | grep flash
Maybe report any interesting values you have with and without OEM Unlock checked. Maybe someone smarter than us will find it useful.
I would really like to see an A01 root happen, it's such an affordable and accessible device for all sorts of things. Great as a backup device or for a project. You think someone would've released some goods for it by now. It's been out all year.
And for the 16GB model, it's absolutely terrible because Samsung eats up so much space, then has the nerve to remove the Adoptable Storage feature. So even if you get a fast SD card, you can't install apps on it. Other than that, it's a perfectly serviceable phone. I would think with root we could get Adoptable Storage working.
To summarize what has been previously stated the Samsung Galaxy A01, version SM-A015M/DS is the Latin American version of this cellphone. This cellphone has a Snapdragon processor. This version is very similar to the versions (also Snapdragon processors) used by some US Carriers. Many current versions of Samsung cellphones have an additional security feature called "SecureBoot" which blocks bootloader unlocking. Some say this features was added at the request of US Carriers
The Asian version of the A01 has a Exynos processor. It is my understanding that with these it is very easy to unlock the bootloader and root the phone using the usual conventional methods. The Asian variant unfortunately does not cover some of the wireless bands used in the US/Canada/Latin America.
I have a Samsung Galaxy A01 SM-A015M/DS, OneUI 2.0/Android 10, 2GB ram, 32GB storage, Snapdragon 439, stock firmware (TPA) for Panama.
My research indicates that there is not yet an available bootloader unlocking and easy root method for this (A01) phone. For some other current Samsung models there does appear to be a method of flashing certain custom ROMs without a bootloader unlock but they appear to come with problems which include loss of some cellphone functions and a reduction in the charged battery life. So it seems hardly worth it.
It also appears that it is current well known that all current Samsung phones with Snapdragon processors have not allowed bootloader unlocking and rooting due to the enhanced security feature.
At this time we can only complain and/or not buy any additional Samsung phones
Perhaps with time skillful developers will come up with a method to solve this problem with this inexpensive A01.
Please provide any new or updated info if you have it.
Any solution for rooting Galaxy A01 ?
I use A015f region SER (Russia) In Russia, too, the device is locked (bootloader) of course, give any solution
One thing I know is that a fellow SM-M015f, which is almost identical, which is with the same Snapdragon 439, except for the battery capacity and screen size and gigabytes of internal memory, successfully unlocks and gets Magisk root.
this phone actually has a fastboot mode, from recover mode select reboot to bootloader, it will boot to fastboot mode,but ive still been unsucessful in getting fastboot mode to work, devices manager reports device error,
I can start the unlock proccess.
But after it is done and the data is wipped,
It keeps locked.
Sad