Related
Hi all!!
Yesterday i tried to install android 4.4 but the procces didnt succeed, it stuck at. LG boot logo. So i decided to restore my backup in ckockworkmod,it started the process then stopped at the phase "restoring /system" . I waited about a half hour, and because it didnt take the much time before, i took out the battery. I read somewhere that formatting the system partition in cwm could help, so i did that. Then i retried restoring my backup. It stuck at the same phase. Later i downloaded the official kdz, and decided to flash it. I could bring the phone in update mode, but the process stopped at 15% at lg update manager.
At the moment i can get into clockworkmod, but cant restore /system . The update mode is also okay. I dont know that fastboot works or not. I havent tried it yet. Please help me thanks in advance
@trapistasajt
You will need to get fastboot working and use lelus's fastboot script to flash the "u" and "x" loaders for the device and then perform the offline or online flash
http://forum.xda-developers.com/showthread.php?t=2292828
Also as you found out you cannot flash custom roms without ulocking the bootloader first and you cannot use the L9 CWM bootstrap recovery for Locked Bootloaders, too flash custom roms.
try this online flash methode with B2CAppSetup
http://forum.xda-developers.com/showthread.php?t=2085344
i had the same probleme and i fixed it .
My bootloader is unlocked. I tried the fast boot method, but it doesnt go further than "Waiting for omap...." . So, i couldnt go into fastboot (probably my fault). Yesterday i sent it to the service. If they notice that my varranty is void (because of the unlocked bl) and send it back, i will try it once more. I would be very thankful if someone could write a noob friendly-fastboot guide. As i read, lots of people are struggling with the same problem. Thanks in advance!!!
You have to use LGMobile Support Tool (Install drivers from it first) Then enter in download mode conecting the phone to pc pressing vol+ and the rest its automatic.
jufece said:
You have to use LGMobile Support Tool (Install drivers from it first) Then enter in download mode conecting the phone to pc pressing vol+ and the rest its automatic.
Click to expand...
Click to collapse
I installed the drivers but it didnt work
trapistasajt said:
I installed the drivers but it didnt work
Click to expand...
Click to collapse
what happened??
jufece said:
what happened??
Click to expand...
Click to collapse
It didnt go further than searching for "omap device", so i couldnt load fast boot, as i said. my phone is still in the service
If they 'll send it back to me, because of unlocked bootloader, i wil try it once more. Any suggestions?
trapistasajt said:
It didnt go further than searching for "omap device", so i couldnt load fast boot, as i said. my phone is still in the service
If they 'll send it back to me, because of unlocked bootloader, i wil try it once more. Any suggestions?
Click to expand...
Click to collapse
I dont know about fastboot.
LG Mobile support tool let you download the correct drivers. Then connect your phone while u keep pressing vol+ and it enters in SW Upgrade mode. Then just click "additional features" and "upgrade error recovery"
jufece said:
I dont know about fastboot.
LG Mobile support tool let you download the correct drivers. Then connect your phone while u keep pressing vol+ and it enters in SW Upgrade mode. Then just click "additional features" and "upgrade error recovery"
Click to expand...
Click to collapse
Thanks! What should i do after that? Or it will automatically flash v20h on my phone?
trapistasajt said:
Thanks! What should i do after that? Or it will automatically flash v20h on my phone?
Click to expand...
Click to collapse
It shows something about firmware ir will restore. Ir will flash the latestbfirmware from original carrier release.
For example i actuallybhave v20L but my original carrier only released v10a. It will restore to v10a
None of them works, other ideas?
This fastboot method worked for me in 5 min, pay close attention to the instructions and it works!
http://androidforums.com/optimus-l9-all-things-root/807569-guide-security-error-fix.html
Spent days with LG update tool which if you read the log has no url for files to download.
Good luck!
I got my phone back from the service. They didnt repair it, because my varranty is void. I tried the methods mentioned above.
First, I tried flashing kdz, (with the solution for post-jb problem), but i couldn't get into S/W mode, which was available before the service.
Second, since i couldn't load S/W mode, the LG upgrader wasn't successfull, too
Third, fastboot still not work.
I am sure, that im not the only person with this problem, since it happened during installing @artas182x 's JB 4.4 rom. Please @artas182x or somebody write a noob-friendly guide/suggestion which may help to unbrick my beloved phone. Thanks!!!!!
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Sorry to hear about your bricked phone. I can't help specifically as I don't have a Lenovo, but having a search around XDA there seems to have been some success reported in the following thread:
http://forum.xda-developers.com/showthread.php?t=2597590
See this post - http://forum.xda-developers.com/showpost.php?p=52013378&postcount=412
Another post in that thread suggests:
Turn off the phone --> Run minimal ABD and fastboot as admin--> just write the command for recovery install (don't hit enter yet)--> press volume + and volume - button and connect the phone to pc via usb--> now hit enter and voila. Your phone will boot in recovery.
Click to expand...
Click to collapse
Good luck!
anyone?
f4780y said:
Sorry to hear about your bricked phone. I can't help specifically as I don't have a Lenovo, but having a search around XDA there seems to have been some success reported in the following thread:
http://forum.xda-developers.com/showthread.php?t=2597590
See this post - http://forum.xda-developers.com/showpost.php?p=52013378&postcount=412
Another post in that thread suggests:
Good luck!
Click to expand...
Click to collapse
i tried this aldready, but my phone is locked bootloder so that method is no help. Thank you for your support anyway.
hientran41 said:
i tried this aldready, but my phone is locked bootloder so that method is no help. Thank you for your support anyway.
Click to expand...
Click to collapse
OK, but did you look at the second link there, to the specific post in that thread? It suggests a process for locked bootloader, which is why I thought it might help...
Anyhoo, I hope you manage to get it fixed somehow!
Is anybody have the droidboot.img file from the VibeZ K910 dualsim, pls upload it for me. i cannot find it anywhere.
I look into the second link as well. that method for user have a working phone but locked bootloader and want to downgrade.
Ah, OK. Sorry I couldn't help.
u fix your phone?
hientran41 said:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Click to expand...
Click to collapse
hi do u fix your phone?
Geguniukas said:
hi do u fix your phone?
Click to expand...
Click to collapse
i bricked also
dunno what to do..
---------- Post added at 12:13 AM ---------- Previous post was at 12:13 AM ----------
hientran41 said:
I have a VIBEZ K910 with locked bootloader after upgrading to version 4.4.2. Now it's bricked. Cannot enter test mode with the combination Volumn - and Power button. I think the droidboot.img is damaged. Cannot enter recovery either. Anybody can help me unbrick the phone? Pls:crying:
Click to expand...
Click to collapse
did you fixed the phone?
lenovo k910e 4.2.2 bricked after TWRP for 4.4.2 installation
Hi , this is my first time on the site , so forgive me if ive posted this in the wrong place.
I briked my Lenovo k910e running 4.2.2 rom with google apps purchased off Aliexpress.
What i did was run the flashrec.exe file for TWRP , but not until too late did i realise it was for 4.4.2 instead of 4.2.2.
Now i cannot boot the phone , TWRP was successfully installed and operational , but after about 20 reboots TWRP flash screen is stuck on the TeamWin logo and not accessable.
Ive tried mostl sugestions on this site and others without luck.
I can get the phone recognised with fastboot only after these commands ;
cd downloads
cd fastboot
adb devices
and it seems i may be able to push files to my device.
Is there a working link to the k910 OEM rom k910_ss_s_2_040_0109_131226 someone could direct me to.
All the links i have found so far are corrupted. Is there a way of repairing the TWRP recovery i have in the phone now.
Am I correct in assuming I have to install the OEM factory 4.2.2 ROM to wipe TWRP and istal Lenovo recovery ?.
Any help would be so appreciated. Thanks
Solution ( k910 bricked )
Ok here is the solution even if your device ( k910 dual sim ) is completely bricked as was mine.
I was stuck in Lenovo logo with no success in finding right and working drivers ( windows 7 64x ) and i was not able to to get in recovery official ...everything was just - somehow - deleted...
I had locked bootloader **** and was not be able to flash cmw in working mode ****
There was nothing for me that could recover my phone even if the "hard" way with QPST or miflash etc
So....after 3 days....find this solution and hope this will help you because it is soooooooooo easy finally!
Steps:
1) Download lenovo driver ( i think it is useless in fact but ok....just run it you dont have anything more to loose )
https://www.dropbox.com/s/frbpz16udrefoit/LenovoUsbDriver_autorun_1.0.112.exe?dl=0
2a) Download and install Minimal adb
https://www.dropbox.com/s/uvngsu4vz4hvsky/minimal_adb_fastboot_v1.1.3_setup.exe?dl=0
So now you have to use the right recovery image ( this file has to be inside minimal adb folder )....so here it is:
https://www.dropbox.com/s/ge05m1fe8n4qgb1/recovery.img?dl=0
2b)
Download this ROM ( this worked for me - with other i did try i did get an error )
http://www.needrom.com/download/lenovo-k910-vibeui-2-0/
prefer the last updated version ( 1501 )
Put this rom in the same ADB folder and renale zip in VIBE1411.ZIP ( in order to be easier later )
3) Turn off the device open Adb and write : fastboot boot recovery.img ( to have it ready )
4) Push volume + $ volume - at the same time and AFTER connect with usb to your pc - At the time the device will vibrate HIT ENTER in ADB
This will flash the recovery and after 1 minute device will open in a recovery screen with an adb update option ***
SELECT THIS adb update OPTION !
Your device kow it is ready to flash the new rom ! ( you will realize that everything is right from many usb beeps you will hear )
5)In adb console write : adb sideload VIBE1411.ZIP
This will take a little ....after that your device will reboot ! Dont panic if for a few minutes it will stuck in lenovo logo....
IT IS NORMAL AND YOU HAVE TO WAIT!
Hope this will help you.....please feel free to tell me if this worked for you.
C u
Same thing happens to my lenovo vibe z k910
buzzbuzz1 said:
Hi , this is my first time on the site , so forgive me if ive posted this in the wrong place.
I briked my Lenovo k910e running 4.2.2 rom with google apps purchased off Aliexpress.
What i did was run the flashrec.exe file for TWRP , but not until too late did i realise it was for 4.4.2 instead of 4.2.2.
Now i cannot boot the phone , TWRP was successfully installed and operational , but after about 20 reboots TWRP flash screen is stuck on the TeamWin logo and not accessable.
Ive tried mostl sugestions on this site and others without luck.
I can get the phone recognised with fastboot only after these commands ;
cd downloads
cd fastboot
adb devices
and it seems i may be able to push files to my device.
Is there a working link to the k910 OEM rom k910_ss_s_2_040_0109_131226 someone could direct me to.
All the links i have found so far are corrupted. Is there a way of repairing the TWRP recovery i have in the phone now.
Am I correct in assuming I have to install the OEM factory 4.2.2 ROM to wipe TWRP and istal Lenovo recovery ?.
Any help would be so appreciated. Thanks
Click to expand...
Click to collapse
After running twrp recovery it operates 3-4 times but now it flashes on twrp screen and screen goes blank and again flashes . I am unable to on it and as it shows only light and lenovo logo after that blank screen . Please help me in this. Its only detecting in adb recovery not any other mode.
lenove vibe Z k910 locked and stuck in logo
hello all
I ve done every word and many other tutorials but still the problem the same:
adb devices give just nothing
but fastboot devices gives the device
the driver is installed correctly detected in devices of the computer
here is the response for :fastboot boot recovery.img:
~/Desktop/lenovo]$ fastboot boot recovery.img (masterā±)
< waiting for device >
downloading 'boot.img'...
OKAY [ 0.536s]
booting...
FAILED (remote: Locked)
finished. total time: 0.538s
thanks for everyone to help
Boot into recovery under bricked condition
Today I bricked K910 after reinstalling GMS apk.
The phone hanged at boot logo.
Nothing can be from here.
I decided to take this risk.
I removed the back cover and disconnected the battery terminal.
After that I plugged back the terminal.
Several tries by power button and volume down to get into the recovery mode. All failed.
Each time it hanged at boot logo.
I have to redo the battery terminal unplug sequence again.
This is correct method to get into recovery mode.
Press power button and volume down till the Lenovo logo appears.
Move the power button finger to the position of the " Home " of the touchscreen position.
Hold till the recovery menu appears. Choose factory reset to erase the phone.
There was two lit small icon below. Make your choice.
The phone will be erased by reset.
Reboot after the process.
I solved my phone bricked problem.
Hope the method will solve your problem.
Good day to all K910 users.
my vibe z cannot access the recovery mode (PWR + VLM DOWN), it only vibrate. If turn on only stuck at Logo. Please help .
I tired to restart phone after noticing that WI-FI isn't working (maybe my internet was laggy, don't know). After restarting phone was stuck on LG logo, i tried many times but again LG logo.
Then i started recovery, and wanted to flash some new ROM. But my CWM won't recoginze my SD card (to add, i wasnt using SD card with this phone). I tried other SD but problem stays. I google it and found out that maybe CWM needs update?
Version of CWM Recovery v6.0.3.1
This shows up when recovery starts..
E:Cant mount / cache/recovery/command
E:Cant mount / cache/recovery/log
E:Cant open / cache/recovery /log
E:Cant mount / cache/recovery/last_log
E:Cant open / cache/recovery/last_log
How to unbrick phone now?
Unfortunatly don't know what ROM was flashed before, or is bootloader unlocked or not. (coming from LG 3D, LG l9 was present. LG 3d methods for flashing is diffrent, so im little confused how to start anything now)
To add that phone now cannot turn on without charger pluged in. Powering on was OK in first few time...
First and important question. Did you unlock your booloader? If yes, you can install cutom roms. If not, you can't install custom roms.
Did you also try to enter SV mode?
1. Power off phone
2. Press and hold volume up
3. Connect phone by usb to PC
4. Wait few sec
5. SV mode should appear.
When you are in SV mode, you can restore stock rom by official LG program.
Rammar515 said:
First and important question. Did you unlock your booloader? If yes, you can install cutom roms. If not, you can't install custom roms.
Did you also try to enter SV mode?
1. Power off phone
2. Press and hold volume up
3. Connect phone by usb to PC
4. Wait few sec
5. SV mode should appear.
When you are in SV mode, you can restore stock rom by official LG program.
Click to expand...
Click to collapse
I started S/W upgrade, and in upper corner it says Bootloader Status: unlocked. So bootloader is unlocked for sure then..
If i manage to update CWM will that solve my problem with SD card? After that just to flash ZIP from recovery?
O something else?
ratluci said:
I started S/W upgrade, and in upper corner it says Bootloader Status: unlocked. So bootloader is unlocked for sure then..
If i manage to update CWM will that solve my problem with SD card? After that just to flash ZIP from recovery?
O something else?
Click to expand...
Click to collapse
I dont know but you should update cwm to 6.0.4.5+ After it you will be able to install all roms from 4.2-5.0.
Rammar515 said:
I dont know but you should update cwm to 6.0.4.5+ After it you will be able to install all roms from 4.2-5.0.
Click to expand...
Click to collapse
Thanks, now really noob question..
I googled how to update recovery on L9, and found methods with installing some APK, but as i cannot start system how to flash then?
There is 2 ways to install new recovery.
You can flash .zip in old recovery, reset phone and you will have new recovery.
You can also flash new recovery by fastboot. You need to have .img recovery.
Can you reset to fastboot in recovery options?
Rammar515 said:
There is 2 ways to install new recovery.
You can flash .zip in old recovery, reset phone and you will have new recovery.
You can also flash new recovery by fastboot. You need to have .img recovery.
Can you reset to fastboot in recovery options?
Click to expand...
Click to collapse
Not sure how to enter fastboot. Cannot see restart to fastboot in CWM..
You can try to enable adb in recovery and use command "adb reboot oem-unlock"
Rammar515 said:
You can try to enable adb in recovery and use command "adb reboot oem-unlock"
Click to expand...
Click to collapse
I cannot start fastboot, dont know how, something doing wrong. On CWM i only have, install zip with sideload (something like that)
Can i flash to stock rom from S/W menu? And what i need if can?
You need phone + usb + pc + lg flash tool (just download it) Connect your phone with SV mode and let program find rom, download and install it.
Rammar515 said:
You need phone + usb + pc + lg flash tool (just download it) Connect your phone with SV mode and let program find rom, download and install it.
Click to expand...
Click to collapse
Not sure what to try next.
I tried this http://forum.xda-developers.com/showthread.php?t=2085344 stays on 15%, and PC cannot see phone
this http://forum.xda-developers.com/showthread.php?t=2797190 , someone sad that this worked becaause first method didnt (was same problem as mine, how i understaned ..)
and tried this http://forum.xda-developers.com/showthread.php?t=2748384 , stuck after 6 sec (something like that). I readed that maybe BIN was corrupted (because of conversion from KDZ to BIN), now ill try with thid BIN http://uploaded.net/file/j32p8p7y/from/xh3dqq ...
What next.. S/W mode says Bootloader unlocked, and before all this phone was using JB..
I still didn't succeded to recover my phone.
My computer simply cannot see my phone, i tried all tools that were avalible. On 3% to 7% (on updating), just says that phone is not connected.
Strange thing is that i managed to flash V20H_00.kdz two times. Every single time i do the same but only that 2 times flash was successful. One time was with "offline method" and then with "LG flashtool 2014", after that flashing i got dead android with red triangle both times.
Then i wanted to flash v20c_00.kdz , but cannot pass 3% to 7% on flashing AGAIN. I'm frustrated !
I tried to flash on other computer but again, phone is not recognisable.
What to do now?
Can i flash ROM with fastboot ?
UPDATE.
I started upgrade recovery with LGMobile support tool, and finished flashing. But AGAIN i got dead android with red triangle!
Now what to try!?
Update
I even tried to flash ROM on WIN XP, but nothing. Again proces stops on 3% (then quckly) jump to 7%. And thats it.
Strange thing that when i start UPGRADE RECOVERY on Official LG TOOL (i think thats official), program download 500mb+ KDZ and process is successful, but i get Dead Android with red triangle..
Anyone have any advice? What to try?
Hi,
I tried to root my phone using TWRP, ADB & Fastboot but my phone is stuck in boot. It restarts as soon as the Acer logo is displayed. I need stock ROM for my phone. Please help me in resetting the phone.
My phone details are below :
Model Number: T04
Android version: 5.1
Kernel version: 3.10.65
Image version: Acer_AV0L0_T04_RV01RC07_IND_GEN1
Build Number : Acer_AV0L0_T04_1 .007.00_IND_GEN1
Thanks.
Kumaranil_1918 said:
Hi,
I tried to root my phone using TWRP, ADB & Fastboot but my phone is stuck in boot. It restarts as soon as the Acer logo is displayed. I need stock ROM for my phone. Please help me in resetting the phone.
My phone details are below :
Model Number: T04
Android version: 5.1
Kernel version: 3.10.65
Image version: Acer_AV0L0_T04_RV01RC07_IND_GEN1
Build Number : Acer_AV0L0_T04_1 .007.00_IND_GEN1
Thanks.
Click to expand...
Click to collapse
Here you are:
https://drive.google.com/file/d/0B35guFajHaQfYUJrWnRON3FTbDg/view
Also here is some links that is veeery useful to you:
http://vache-android.com/?dir=hubicAcer/Z630S
MigoMujahid said:
Here you are:
https://drive.google.com/file/d/0B35guFajHaQfYUJrWnRON3FTbDg/view
Also here is some links that is veeery useful to you:
http://vache-android.com/?dir=hubicAcer/Z630S
Click to expand...
Click to collapse
Thank you but is it compatible with my phone? I tried rooting using 'TWRP_2860_Z630S-T04_Shreps.img' file. When I unlocked bootloader using the fastboot command, my phone was reset. Then, I flashed the above image using fastboot for custom recovery so that I can install SuperSu but phone stuck in boot as soon as I entered fastboot reboot. Since then, my phone is in bootloop. Manual reset using the phone button isn't working.
Kumaranil_1918 said:
Thank you but is it compatible with my phone? I tried rooting using 'TWRP_2860_Z630S-T04_Shreps.img' file. When I unlocked bootloader using the fastboot command, my phone was reset. Then, I flashed the above image using fastboot for custom recovery so that I can install SuperSu but phone stuck in boot as soon as I entered fastboot reboot. Since then, my phone is in bootloop. Manual reset using the phone button isn't working.
Click to expand...
Click to collapse
It's compatible with your phone, there is another image in the other link i gave you but an older firmware, you can try it too
There is also this lollipop rooted one :
https://drive.google.com/file/d/0BwF5fKdxM85SenRSSnU1c3JHczg/view?usp=sharing
And this one is thought to be marshmallow:
https://drive.google.com/file/d/0BwF5fKdxM85SQmVhQ0IzX3dwWEU/view?usp=sharing
MigoMujahid said:
It's compatible with your phone, there is another image in the other link i gave you but an older firmware, you can try it too
There is also this lollipop rooted one :
https://drive.google.com/file/d/0BwF5fKdxM85SenRSSnU1c3JHczg/view?usp=sharing
And this one is thought to be marshmallow:
https://drive.google.com/file/d/0BwF5fKdxM85SQmVhQ0IzX3dwWEU/view?usp=sharing
Click to expand...
Click to collapse
Thank you. WIll try and let you know. Can you please tell me how to flash the recovery since my phone is stuck in bootlloop?
Kumaranil_1918 said:
Thank you. WIll try and let you know. Can you please tell me how to flash the recovery since my phone is stuck in bootlloop?
Click to expand...
Click to collapse
Using adb you can flash the recovery but it requires the USB debugging yo be enabled on your phone, and your phone is bootloaped so we are almost in a dead end here, what do you get when you try to enter the recovery?
MigoMujahid said:
Using adb you can flash the recovery but it requires the USB debugging yo be enabled on your phone, and your phone is bootloaped so we are almost in a dead end here, what do you get when you try to enter the recovery?
Click to expand...
Click to collapse
I already enabled usb debugging mode and unlocked bootloader before flashing the TWRP image. I don't know how to enter into recovery mode. I tried every key combination but my phone restarts once Acer logo is displayed. A blank screen is displayed, then phone vibrates and acer logo is displayed. Again, the same thing happens.
Kumaranil_1918 said:
I already enabled usb debugging mode and unlocked bootloader before flashing the TWRP image. I don't know how to enter into recovery mode. I tried every key combination but my phone restarts once Acer logo is displayed. A blank screen is displayed, then phone vibrates and acer logo is displayed. Again, the same thing happens.
Click to expand...
Click to collapse
Have you tried power button with volume up or with volume down,?
If you succeed, do the following while in the bootloader menu
To flash TWRP with adb, you must have adb & fastboot installed, download the installation from here.
Now connect your device to your PC and go to the folder where your TWRP is and press and hold shift then right click on an empty place on the folder and choose "Open command window here"
Now type following commands at command prompt.
Code:
adb reboot bootloader
to boot your device into bootloader.
after booting into bootloader type
Code:
fastboot flash recovery xxxx.img
"xxxx" refers to the recovery file name.
After the process finishes, try booting into the Recovery using Power+Volume up.
MigoMujahid said:
Have you tried power button with volume up or with volume down,?
If you succeed, do the following while in the bootloader menu
To flash TWRP with adb, you must have adb & fastboot installed, download the installation from here.
Now connect your device to your PC and go to the folder where your TWRP is and press and hold shift then right click on an empty place on the folder and choose "Open command window here"
Now type following commands at command prompt.
Code:
adb reboot bootloader
to boot your device into bootloader.
after booting into bootloader type
Code:
fastboot flash recovery xxxx.img
"xxxx" refers to the recovery file name.
After the process finishes, try booting into the Recovery using Power+Volume up.
Click to expand...
Click to collapse
Thanks. I tried the combination but nothing happens. I also tried removing the battery and connecting the phone to pc. Once I connect without battery, a blue charging light appears on the top left hand side. Then, I tried the key combinations again. The phone vibrates but blank screen is being displayed. Is there any way I can recover using SP flash tool using the scatter file in the link provided above?
Kumaranil_1918 said:
Thanks. I tried the combination but nothing happens. I also tried removing the battery and connecting the phone to pc. Once I connect without battery, a blue charging light appears on the top left hand side. Then, I tried the key combinations again. The phone vibrates but blank screen is being displayed. Is there any way I can recover using SP flash tool using the scatter file in the link provided above?
Click to expand...
Click to collapse
I tried flashing the file "Acer_AV0L0_T04_1.001.00_EMEA_GEN2_(rooted)" using SP flash tool and I got the errors. I've attached screenshots of both the errors. Now my phone isn't booting when I press the power button. No vibrations, only blank screen. I searched in Google and "Error Message: S_DL_GET_DRAM_SETTING_FAIL (0x13BE), Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings". Please help.
Kumaranil_1918 said:
I tried flashing the file "Acer_AV0L0_T04_1.001.00_EMEA_GEN2_(rooted)" using SP flash tool and I got the errors. I've attached screenshots of both the errors. Now my phone isn't booting when I press the power button. No vibrations, only blank screen. I searched in Google and "Error Message: S_DL_GET_DRAM_SETTING_FAIL (0x13BE), Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings". Please help.
Click to expand...
Click to collapse
The firmware is compatible, try flashing with SP Flash tool v3 not v5.
MigoMujahid said:
The firmware is compatible, try flashing with SP Flash tool v3 not v5.
Click to expand...
Click to collapse
Which options do I choose now? I assume I have to select 'Format All + Download' option since my phone isn't booting when I press the power button. No vibrations, only blank screen. Also, I need to know if all the files provided in the ROM need to be checked in SP flash tool for flashing or just Recovery.img.
Kumaranil_1918 said:
Which options do I choose now? I assume I have to select 'Format All + Download' option since my phone isn't booting when I press the power button. No vibrations, only blank screen. Also, I need to know if all the files provided in the ROM need to be checked in SP flash tool for flashing or just Recovery.img.
Click to expand...
Click to collapse
Well, choosing the recovery only will flash the recovery only, keep it default and try "download"
MigoMujahid said:
Well, choosing the recovery only will flash the recovery only, keep it default and try "download"
Click to expand...
Click to collapse
Just to confirm, I just select 'Download only' option and keep the checked items as it is without changing and flash using SP Flash tool v3. Am I right?
Kumaranil_1918 said:
Just to confirm, I just select 'Download only' option and keep the checked items as it is without changing and flash using SP Flash tool v3. Am I right?
Click to expand...
Click to collapse
Yes that should absolutely work...
-----------------------------------------
If i Helped you, support me and press the "thanks" button
MigoMujahid said:
Yes that should absolutely work...
Click to expand...
Click to collapse
Thanks. I'll try now and let you know.
Kumaranil_1918 said:
Thanks. I'll try now and let you know.
Click to expand...
Click to collapse
I tried flashing using the below versions:
SP-Flash-Tool-v3.1224.0.100
SP-Flash-Tool-v3.1312.0.139
SP-Flash-Tool-v3.1316.0.150
SP-Flash-Tool-v3.1328.0.183
SP-Flash-Tool-v3.1332.0.187
SP-Flash-Tool-v3.1344.0.212
I got many error messages. I've attached them. I've also tried downloading and installing 'Mediatek_USB_Driver_Auto-Installer_5.1632.00'. The flashing still doesn't work.
Kumaranil_1918 said:
I tried flashing using the below versions:
SP-Flash-Tool-v3.1224.0.100
SP-Flash-Tool-v3.1312.0.139
SP-Flash-Tool-v3.1316.0.150
SP-Flash-Tool-v3.1328.0.183
SP-Flash-Tool-v3.1332.0.187
SP-Flash-Tool-v3.1344.0.212
I got many error messages. I've attached them. I've also tried downloading and installing 'Mediatek_USB_Driver_Auto-Installer_5.1632.00'. The flashing still doesn't work.
Click to expand...
Click to collapse
Can you please tell me how to proceed now?
Kumaranil_1918 said:
Can you please tell me how to proceed now?
Click to expand...
Click to collapse
Press download first, then plug the phone to usb
MigoMujahid said:
Press download first, then plug the phone to usb
Click to expand...
Click to collapse
Yes, I selected 'Download' option and then connected my phone with battery in it. I left the checked boxes as it is. You can see them in the screenshots. The tool didn't proceed from 0%. It showed the errors which I've attached previously.
Need Help!! Realme 1 stuck at Orange State Your phone is Unloaked & no longer secured
I recently tried to Root My Realme 1 Phone It by following the Official Guide from here https://c.realme.com/in/post-details/1101401810746212352 . My phone was rooted Successfully but then i tried to Install magisk by this Guide https://forum.xda-developers.com/realme-1/development/official-method-root-realme-1-install-t3908030 now my Phone is Stuck at Orange State, Your Device is unlocked and can't be trusted, Your device will reboot in 5 second. This is playing again and Again. Even adb or Fastboot tool is not Detecting my device now.
SarvinBatra said:
I recently tried to Root My Realme 1 Phone It by following the Official Guide from here https://c.realme.com/in/post-details/1101401810746212352 . My phone was rooted Successfully but then i tried to Install magisk by this Guide https://forum.xda-developers.com/realme-1/development/official-method-root-realme-1-install-t3908030 now my Phone is Stuck at Orange State, Your Device is unlocked and can't be trusted, Your device will reboot in 5 second. This is playing again and Again. Even adb or Fastboot tool is not Detecting my device now.
Click to expand...
Click to collapse
did you update your device with latest update before doing root?
are you able to go to recovery mod ? if yes
format your device and see..
abhi.s4u said:
did you update your device with latest update before doing root?
are you able to go to recovery mod ? if yes
format your device and see..
Click to expand...
Click to collapse
Yes it was updated to the Latest version. In recovery mode i see only Reboot, Turn off and Wipe data option i tried each one of them but as soon as phone start the same loop start again.
help
same problem bro please anyone can provie full backup without using of oppo download tool as it requires staff account :crying:
SarvinBatra said:
I recently tried to Root My Realme 1 Phone It by following the Official Guide from here https://c.realme.com/in/post-details/1101401810746212352 . My phone was rooted Successfully but then i tried to Install magisk by this Guide https://forum.xda-developers.com/realme-1/development/official-method-root-realme-1-install-t3908030 now my Phone is Stuck at Orange State, Your Device is unlocked and can't be trusted, Your device will reboot in 5 second. This is playing again and Again. Even adb or Fastboot tool is not Detecting my device now.
Click to expand...
Click to collapse
Bro Provide me your whatsapp number as only be can help each other for fixing realme 1
need help asap
mine too same problem.. wiped data tried installing ota using sd card but no success finally installation failed,again I tried online updating via Wi-Fi it shows no downloadable version detected tried flashing .ofp firmware without any luck it shows encod data checksum error,incorrect scatter file format bla bla bla.. I'm tired of this ****.. gys plez help
Same here..tried flashing using download tool but cnt,,any help appreciated
Hard Brick Fix(Not Hard Brick Actually)
Step 1:
Just download miracle box and install it on your pc
Step2:
Download scatter file, recovery img and boot img keep all of them in one folder and then
Step3:
Follow flash stock ROM guide
Recovery :
https://mega.nz/#!QgRDGYZD!3vaot9F9A...FbeRv1BXq5jwWU
Boot:https://mega.nz/#!AlRXnQ4a!VNE1a3xRc...Kwd4L1BnAfzArs
Scatter:https://mega.nz/#!JtZzlAib!OoICrY7n8..._AWUNgMMFIz1us
Miracle Box:https://mega.nz/#!lVsQGSaC!6TTJopMyn...Ibhx2qWL_ZqDyI
Rename boot.IMG to boot.bin like and place recovery.bin,boot.bin ,scatter.bin in same folder
Credits @anuragroy
Flashing Part:
Now : Install Miracle Box > launch > go to MTK > click services > select Write from the available options > select mtk 6771 from boot options > then fron second option select realme 1 > then load mtk 6771 scatter file > check skip preloader file > then hit start
Now connect your phone and hold volume and power buttons... It will flash and turn off your phone
Now hold power button, your phone should boot normally
Thanks to @Hamza417 for tutorial
abhi.s4u said:
Hard Brick Fix(Not Hard Brick Actually)
Step 1:
Just download miracle box and install it on your pc
Step2:
Download scatter file, recovery img and boot img keep all of them in one folder and then
Step3:
Follow flash stock ROM guide
Recovery :
https://mega.nz/#!QgRDGYZD!3vaot9F9A...FbeRv1BXq5jwWU
Boot:https://mega.nz/#!AlRXnQ4a!VNE1a3xRc...Kwd4L1BnAfzArs
Scatter:https://mega.nz/#!JtZzlAib!OoICrY7n8..._AWUNgMMFIz1us
Miracle Box:https://mega.nz/#!lVsQGSaC!6TTJopMyn...Ibhx2qWL_ZqDyI
Rename boot.IMG to boot.bin like and place recovery.bin,boot.bin ,scatter.bin in same folder
Credits @anuragroy
Flashing Part:
Now : Install Miracle Box > launch > go to MTK > click services > select Write from the available options > select mtk 6771 from boot options > then fron second option select realme 1 > then load mtk 6771 scatter file > check skip preloader file > then hit start
Now connect your phone and hold volume and power buttons... It will flash and turn off your phone
Now hold power button, your phone should boot normally
Thanks to @Hamza417 for tutorial
Click to expand...
Click to collapse
Hello, I am not able to download the files from the mega link, Its not loading, and when I open the link with VPN, it says wrong decryption key, Can you please upload the files to Google Drive or something else?
adityadtr said:
Hello, I am not able to download the files from the mega link, Its not loading, and when I open the link with VPN, it says wrong decryption key, Can you please upload the files to Google Drive or something else?
Click to expand...
Click to collapse
sorry bro i don't have backup of links...
go through this link u have to
download whole stock rom... i haven't tested it so do it on your own risk..
Mod edit: Link removed
Hello, I know i'm a bit late on this I had this problem recently and found out that flashing the latest ota update gets rid of the problem. The message wont disappear but the phone will boot properly. Just download the latest OTA update from the realme website and put it in you sd card and flash it from recovery. Also protip everytime you flash a file reboot manually not from adb fastboot as that leads to the bootloop.
Hope it helps.
after downloading latest OTA from realme website and tried flashing using recovery mode. installation failed is showing? sombody help!
---------- Post added at 06:31 PM ---------- Previous post was at 06:21 PM ----------
bidhan001 said:
mine too same problem.. wiped data tried installing ota using sd card but no success finally installation failed,again I tried online updating via Wi-Fi it shows no downloadable version detected tried flashing .ofp firmware without any luck it shows encod data checksum error,incorrect scatter file format bla bla bla.. I'm tired of this ****.. gys plez help
Click to expand...
Click to collapse
mine same problem, did you solved the problem now?
please help if sombody has working solution/method, let me know. my realme 1 also facing same problem and tried flashing latest OTA update from official site but no luck showing installation failed:crying::crying:.
abhi.s4u said:
Hard Brick Fix(Not Hard Brick Actually)
Step 1:
Just download miracle box and install it on your pc
Step2:
Download scatter file, recovery img and boot img keep all of them in one folder and then
Step3:
Follow flash stock ROM guide
Recovery :
https://mega.nz/#!QgRDGYZD!3vaot9F9A...FbeRv1BXq5jwWU
Boot:https://mega.nz/#!AlRXnQ4a!VNE1a3xRc...Kwd4L1BnAfzArs
Scatter:https://mega.nz/#!JtZzlAib!OoICrY7n8..._AWUNgMMFIz1us
Miracle Box:https://mega.nz/#!lVsQGSaC!6TTJopMyn...Ibhx2qWL_ZqDyI
Rename boot.IMG to boot.bin like and place recovery.bin,boot.bin ,scatter.bin in same folder
Credits @anuragroy
Flashing Part:
Now : Install Miracle Box > launch > go to MTK > click services > select Write from the available options > select mtk 6771 from boot options > then fron second option select realme 1 > then load mtk 6771 scatter file > check skip preloader file > then hit start
Now connect your phone and hold volume and power buttons... It will flash and turn off your phone
Now hold power button, your phone should boot normally
Thanks to @Hamza417 for tutorial
Click to expand...
Click to collapse
Hey, I'm having the same problem, orange state bootloop. The mega links need paid account, while sp flash tool doesnt recognize the device. I am yet to find a version of the rom which has the scatter file. Miracle doesnt work because of the mega links. I am able to go to stock recovery, however, sd card installation says "installed version is older than current one" while wifi says no update available. Any help would be much appreciated.
StripsOfTatti said:
Hey, I'm having the same problem, orange state bootloop. The mega links need paid account, while sp flash tool doesnt recognize the device. I am yet to find a version of the rom which has the scatter file. Miracle doesnt work because of the mega links. I am able to go to stock recovery, however, sd card installation says "installed version is older than current one" while wifi says no update available. Any help would be much appreciated.
Click to expand...
Click to collapse
ok i hv find this video.. plz check
Mod edit: Link removed
SarvinBatra said:
I recently tried to Root My Realme 1 Phone It by following the Official Guide from here https://c.realme.com/in/post-details/1101401810746212352 . My phone was rooted Successfully but then i tried to Install magisk by this Guide https://forum.xda-developers.com/realme-1/development/official-method-root-realme-1-install-t3908030 now my Phone is Stuck at Orange State, Your Device is unlocked and can't be trusted, Your device will reboot in 5 second. This is playing again and Again. Even adb or Fastboot tool is not Detecting my device now.
Click to expand...
Click to collapse
Bro I have the same problem please help if u fixed it in phone when I opening the recovery mode it showing"Oppo verify pass fastboot_unlock_verify ok".
How to fix it bro
realme 1 problem
plz help me i cannot get into recovery mode on realme 1 and it is stuck in logo and orange state and restart over and over
I have same problem when i gone to REALME service centre they told me that we can not fix this because it is root and they were saying it can charge 5000-6000rs for motherboard and they said that it may be not work (Realme 1)
my phone is stuck on boot screen and i can not booting in recovery mod
what can i do please help me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
please!please!please!please!please!please!please!please!please!please!please!please!please!please!please!please
same problem on realme u1
what should I do?
ASHISH12345677 said:
Bro Provide me your whatsapp number as only be can help each other for fixing realme 1
Click to expand...
Click to collapse
my number 7999809456 plzz help me out i am ready to pay u plzz
SarvinBatra said:
Yes it was updated to the Latest version. In recovery mode i see only Reboot, Turn off and Wipe data option i tried each one of them but as soon as phone start the same loop start again.
Click to expand...
Click to collapse
I was unlocked bootloader of Realme c2 and installed twrp patched file. Successfully installed. Now i unable to go to recovery mod. Showing ''5 second to reboot." And "Oppo verify pass ok". Please help me.