Code:
/*
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*if you flashed it over marshmallow, i will laugh more than anyone would do !
*/
EMUI 5 ONLY !
Kernel features:
∆SIO io scheduler added
∆FIOPS io scheduler added
∆ROW io scheduler added
∆TRIPNDROID io scheduler
∆fast fingerprint wake up
∆ fsync on/off support
∆quick wake up added
∆F2FS file system support
∆tweaked stock governors (ondemand/interactive)
∆NTFS file system support
∆ implemented mbcache2
∆ toggable crc check ( you can en/dis able it) (disabled by default)
∆ drop vfs cache pressure for more ram
∆ faster fingerprint wakeup, decreased duration to 2000ms (3000 was before)
∆ much faster /proc/vmstat for better performance
∆ disabled safetynet check
∆Built with Anykernel package = it can be installed in any version & any model, and without losing root !
Download:
Arsenik v2 magisk users, please use this one :
SMOKY-V2-FOR ARSENIK
SMOKY-KERNEL-V2
SMOKY-KERNEL-V1.1
SMOKY-KERNEL-V1
Installation:
1/download and install Kernel adiutor
2/enable init.d by emulating it
3/Flash the Kernel zip in TWRP Recovery.
4/reboot
CHANGELOG
SMOKY-KERNEL -V2 :
+implemented mbcache2
+toggable crc check ( you can en/dis able it) (disabled by default)
+ drop vfs cache pressure for more ram
+faster fingerprint wakeup, decreased duration to 2000ms (3000 was before)
+ much faster /proc/vmstat for better performance
+disabled safetynet check
SMOKY-KERNEL-V1.1
+added quick wakeup ( double tap 2 wake became faster)
+added tripndroid io scheduler
+added f2fs file system support
+tweaked stock governors (interactive/ondemand)
SMOKY-KERNEL-V1:
initial release
XDA:DevDB Information
Smoky Kernel for Honor 5c
Contributors
@simo255 (me)
i wanna really thank @OldDroid , because he helped me so as to build this kernel, after 1000 and 1 errors, if he wasn't here, you would have never seen this kernel !
Thank you @OldDroid !
Source Code: https://github.com/simo255/Smokey-Kernel
Version Information
Status: ~STABLE~
Created 2017-07-18
Last Updated 2017-07-21
Your job is great
I just don't find double tap 2 wake
MHN.1515 said:
Your job is great
I just don't find double tap 2 wake
Click to expand...
Click to collapse
it isnt in setting>smart assistance ?
simo255 said:
it isnt in setting>smart assistance ?
Click to expand...
Click to collapse
No
I searched carefully
I use Rom Elite 2.0
I've installed the kernel
But this option is not available
MHN.1515 said:
No
I searched carefully
I use Rom Elite 2.0
I've installed the kernel
But this option is not available
Click to expand...
Click to collapse
it was there before installing my Kernel?
simo255 said:
it was there before installing my Kernel?
Click to expand...
Click to collapse
No, I have not seen this before
But it is said that this item is added by installing a rom or kernel !
MHN.1515 said:
No, I have not seen this before
But it is said that this item is added by installing a rom or kernel !
Click to expand...
Click to collapse
so speak with the dev of your current rom.
new update available !
check changelog for more infos
Works with l51 ?
zezo07 said:
Works with l51 ?
Click to expand...
Click to collapse
it works in every rom and every firmware
simo255 said:
it works in every rom and every firmware
Click to expand...
Click to collapse
Can't fing double tap
Im not using any rom
zezo07 said:
Can't fing double tap
Im not using any rom
Click to expand...
Click to collapse
hello , folllow this guide if you wanna add most of the hidden features of nougat
https://forum.xda-developers.com/huawei-p9lite/how-to/nougat-official-firmware-t3512932
After installing version 2
Does not accept the device password
Is there anything about the password in the kernel?
MHN.1515 said:
After installing version 2
Does not accept the device password
Is there anything about the password in the kernel?
Click to expand...
Click to collapse
which version did you flash ? the arsenik version or the v2 ?
simo255 said:
which version did you flash ? the arsenik version or the v2 ?
Click to expand...
Click to collapse
The arsenik version 2
I changed the kernel (stock) , I deleted the password phone , installed it again
Problem solved now
MHN.1515 said:
The arsenik version 2
I changed the kernel (stock) , I deleted the password phone , installed it again
Problem solved now
Click to expand...
Click to collapse
restore stock boot, and flash tge Smoky kernel v2, not arsenik one !
Related
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at yo
*/
This is my 2nd kernel for our thomas device. based on latest kumajaya kernel source with some modification added. Compatible only for CM12 roms. if you flashing this to another roms based on cm12 you'll faced audio and camera bug. unless, you ask the developer to update they rom with latest source from kumajaya :fingers-crossed:
Features:
OC cpu to 1.4MHz
UC & OC GPU
18 Cpu govs
Intelliplug, msm hotplug, mpdecision hotplug, alucard hotplug, Thunderplug
Intelli thermal & Custom thermal
Adreno idler
KCAL
USB fastcharge
10 i/o scheduler
qpnp vibration
Fsync & Dynamic fsync
Powersuspend
Advance TCP congestion
State notifier
LCD notifier
More more....
Instalation:
Download the file kernel
Go to your recovery (TWRP recommended)
Backup your boot partition
Install file kernel without wipe
Reboot
Done
Thank to:
Ketut Kumajaya
Tarun93
haikalizz
sultanqasim
Ashish94
Khusika Dhamar Gusti
Mr-AW
XDA:DevDB Information
Octopus Kernel, Kernel for the Xiaomi Redmi 2
Contributors
ocoot
Source Code: https://github.com/ocoot/octopus_kernel_msm8916
Kernel Special Features:
Version Information
Status: Stable
Created 2016-03-28
Last Updated 2016-04-14
Updates section
DOWNLOAD
DEV-HOST
CHANGELOG
14-04-2016:
*new: UKSM added
*new: Add DanceDance Govs
Reserved
Issue/bug
1. Touchscreen not responsive in charging mode
2. Blue flickering in camera
billbuds said:
Issue/bug
1. Touchscreen not responsive in charging mode
2. Blue flickering in camera
Click to expand...
Click to collapse
1. it's not happend here. waiting another respons
2. IMHO. like cm13 before, it's bcz device tree problem. also ask kumajaya to confirmed it
1.4 ghz not mhz correct it bro..!
-Sourav_8434
Thanks for your Kernel for cm12.1. I tested during a normal day of my use (twitter, whatsapp and a few games). Not warmed up and the battery lasted all day. I could not see if the touch hangs during charging because left overnight in charge. In Kernel Auditor that there are several hotplugs connected, is this normal?
My configuration:
HM2014819
Build 20160318 kumajaya
1400~200MHz
Elementalx
sio
Westwood
Revert this bro !
https://github.com/kumajaya/android...mmit/25d12669b4ebaf3213397c9f992ba158e97dc0a2
This is touchscreen problem in CM13 kumajaya Old build
Sourav_8434 said:
1.4 ghz not mhz correct it bro..!
-Sourav_8434
Click to expand...
Click to collapse
thankyou!
bruxef said:
Thanks for your Kernel for cm12.1. I tested during a normal day of my use (twitter, whatsapp and a few games). Not warmed up and the battery lasted all day. I could not see if the touch hangs during charging because left overnight in charge. In Kernel Auditor that there are several hotplugs connected, is this normal?
My configuration:
HM2014819
Build 20160318 kumajaya
1400~200MHz
Elementalx
sio
Westwood
Click to expand...
Click to collapse
it's normal. just switch off the others hotplug
billbuds said:
Revert this bro !
https://github.com/kumajaya/android...mmit/25d12669b4ebaf3213397c9f992ba158e97dc0a2
This is touchscreen problem in CM13 kumajaya Old build
Click to expand...
Click to collapse
as your wish https://github.com/ocoot/octopus_kernel_msm8916/commit/370dca9d236452ec6ef94c2dd1098c0cff3c4bca
Work flawlessly with cm12.1 build 0312 . Thank you ?
Sent from my 2014817 using Tapatalk
asterix14 said:
Work flawlessly with cm12.1 build 0312 . Thank you
Sent from my 2014817 using Tapatalk
Click to expand...
Click to collapse
thankyou. waiting for the review
Waiting new build and testing new commit in your github.
I'm getting a message after restart saying that ( unfortunately com.process. phone) stopped working.
After resetting also the message appears
Rom-Cm12
Help me out
this kernel is by far the best custom kernel for cm 12.1
job executed flawlessly .. nice one bro!
@ocoot maybe you could add DT2W from @pirej to this kernel?
Many thanks!
Riyanx55tu said:
I'm getting a message after restart saying that ( unfortunately com.process. phone) stopped working.
After resetting also the message appears
Rom-Cm12
Help me out
Click to expand...
Click to collapse
What version of your rom you using?
inpamcoxie said:
this kernel is by far the best custom kernel for cm 12.1
job executed flawlessly .. nice one bro!
Click to expand...
Click to collapse
thankyou
proudh0n said:
@ocoot maybe you could add DT2W from @pirej to this kernel?
Many thanks!
Click to expand...
Click to collapse
dt2w still unstable. maybe no for the future until it's stable
in resurrection remix last LP update 5.9.9,the kernel is smooth but am getting error in camera.any solution?
superstar007 said:
in resurrection remix last LP update 5.9.9,the kernel is smooth but am getting error in camera.any solution?
Click to expand...
Click to collapse
you need to ask the developer for update the RR upstream for lolipop
Touchscreen in charging mode is fix ???
Sent from my 2014817 using XDA-Developers mobile app
billbuds said:
Touchscreen in charging mode is fix ???
Sent from my 2014817 using XDA-Developers mobile app
Click to expand...
Click to collapse
i don't know. try it
OPTIMUS KERNEL
Hi guys, this is Optimus kernel for Potter. Only necessary features will be added.
This is for Nougat only. Works on Lineage/AOSP Roms. Enjoy!
Code:
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
FEATURES:
- Updated to latest Motorola & CAF Sources
- Updated to latest upstream (3.18.60) from kernel.org
- Built with custom tailored GCC-5.4.1 toolchain (cortex-a53 neon-vfpv4 hard-float targeted, build with latest Crosstool-NG)
- Makefile: gcc optimizations (03 & VFP hardfloat support)
- Added Fingerprint boost driver
- Added zen,fiops & sio I/O schedulers
- Added Fsync ON/OFF Control
- Added wakelock blocker support
- display: added simple api to query ON/OFF state
- Interactive: reduced timer with screen off
- KCAL control driver
- Added Sound Control driver
- Enabled power efficient workqueues by default
- Added Wake Gestures support
- KGSL & Devfreq patches
- msm: added sysfs node for vibration control
- Disabled CRC check: 30% Performance boost
- Merged upstream ARM,crypto changes
- Updates to zram,zsmalloc,irq etc
- Sched & Cpufreq Tweaks
- Removed some debug and logging options
- Enabled Advanced TCP Congestions
- Lineage Profiles compatibility
- Many more (check github)
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. (optional) Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and enjoy!
You need ROM's default kernel before flashing this as this kernel uses Anykernel2 by @osm0sis (huge thanks to him). Make sure you have it otherwise clean flash the kernel with the rom to avoid any issues.(At least dirty flash rom+kernel)
DOWNLOAD:
GDRIVE
Special thanks to:
vache
flar2
franciscofranco
frap29
GtrCraft
fAiyaZ
The Legacy Team
XDA:DevDB Information
Optimus Kernel, Kernel for the Moto G5 Plus
Contributors
Flashhhh
Source Code: https://github.com/desaishivam26/Optimus_Potter/commits/n7.1
Kernel Special Features:
Version Information
Status: Beta
Created 2017-05-29
Last Updated 2017-07-12
I am still working on the kernel. So if u encounter any bugs pls report with logs.
Little info about Optimus Governor:
Optimus governor is based on conservative governor. It sets the CPU frequencies depending on the current usage.
It differs in behaviour in that it gracefully increases and decreases the CPU speed rather than jumping to max speed
the moment there is any load on the CPU. It tries to stay on minimum frequency as much as possible reducing power
consumption. I have added a tunable OPTIMAL_THRESHOLD. When the load reaches optimal threshold the cpu frequency
increases to preset optimal_freq. You can adjust these parameters using a kernel tweaker app. It also makes use of simple
display state API to query panel ON/OFF operations reducing power consumption during screen off
I recommend using EX kernel Manager or Kernel Adiutor for tweaking kernel parameters if u want to.
Yo will there. Be support for the stock rom?
Are you the same Flashhhh who used to build for Moto G 1st?
@Flashhhh nice job mate!
Amazing ?
Thug level: beyond calculation.
Sarthak Narang said:
Thug level: beyond calculation.
Click to expand...
Click to collapse
I second that.
zeft64 said:
Yo will there. Be support for the stock rom?
Click to expand...
Click to collapse
Maybe. I need testers for stock rom
navaneethkom said:
Are you the same Flashhhh who used to build for Moto G 1st?
Click to expand...
Click to collapse
Yup
I am ready to test for stock rom sir.
You got another stock tester right here
Flashhhh said:
Maybe. I need testers for stock rom
Yup
Click to expand...
Click to collapse
I'll do it!
zeft64 said:
I'll do it!
Click to expand...
Click to collapse
You should try the kernel on stock. I don't see a reason why it shouldn't work. Just backup your stock boot.img. If anything goes wrong u can always restore stock boot.img
Flashhhh said:
You should try the kernel on stock. I don't see a reason why it shouldn't work. Just backup your stock boot.img. If anything goes wrong u can always restore stock boot.img
Click to expand...
Click to collapse
Pause. That's a trap. I've. Tried that before with other kernels. It never works lol
zeft64 said:
Pause. That's a trap. I've. Tried that before with other kernels. It never works lol
Click to expand...
Click to collapse
We are using anykernel method. It doesn't replace boot.img so it should work. Just give it a try. But remember to backup stock boot.img
Flashhhh said:
We are using anykernel method. It doesn't replace boot.img so it should work. Just give it a try. But remember to backup stock boot.img
Click to expand...
Click to collapse
The kernel I'm talking about used the any kernel method as well. I'm talking about extended kernel. Didn't work until I flashed the one the dev made for stock
zeft64 said:
The kernel I'm talking about used the any kernel method as well. I'm talking about extended kernel. Didn't work until I flashed the one the dev made for stock
Click to expand...
Click to collapse
Ok . That wasn't the case for my previous device Osprey. The kernel worked on both custom and stock. I think I'll have to make a separate zip for stock then
Flashhhh said:
Ok . That wasn't the case for my previous device Osprey. The kernel worked on both custom and stock. I think I'll have to make a separate zip for stock then
Click to expand...
Click to collapse
Can you please include Faux sound , headset high performance mode also .?
Thanks for such an awesome work , I'll try your one on stock too to see if it works .
Ohhh yeahhh Flashhhh is here too. I'm in love potter support <3 ...
Man, I tried the kernel, and it is smooth. But with optimus, interactive, conservative, ondemand governors, the frequence goes to high clock (2.0ghz) and it stuck there for hude time, even without using all power, then it goes to Min (0.6ghz) and stuck there for hude time too, even when it is necessary to use high clocks.
aki_007 said:
Can you please include Faux sound , headset high performance mode also .?
Thanks for such an awesome work , I'll try your one on stock too to see if it works .
Click to expand...
Click to collapse
Did it work?
/*
* Your warranty is... Still valid??.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WON'T WORK ON STOCK BASED ROM
Introduction:
The main objective of the kernel is to give to any user, a stock kernel with some tweaks like new CPU govenor focused on battery, performance and both of them, I/O scheduler, ...
Click to expand...
Click to collapse
Features:
Updated to lastest Motorola source
Kernel upstreamed to lastest source (3.18.63)
Lionfish, Bioshock, Zzmoove, PegasusQ CPU governors
FIOPS, ZEN I/O scheduler
Fingerprint boost driver
CRC check disabled (Performance boosted)
Vibration control
Sound control
Fsync support
Safetynet patch
Makefile: -0fast and Graphite optimizations
All feature of the boulzordev's kernel
Many other tweaks (check gitlab)
Click to expand...
Click to collapse
Download
Androidfilehost: https://www.androidfilehost.com/?w=files&flid=198747
Click to expand...
Click to collapse
How to flash:
1. Download Alize for Potter
2. Reboot to recovery
3. Flash kernel's zip
4. Reboot and tweak with proper app (Kernel auditor, Ex kernel manager, ...)
Click to expand...
Click to collapse
XDA:DevDB Information
Alize, Kernel for the Moto G5 Plus
Contributors
Martichou, Boulzordev, Flar2, Vache, fAiyaz, Nick
Source Code: https://gitlab.com/alize_kernel/Potter
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 1.0.7
Created 2017-07-20
Last Updated 2017-07-20
Changelog:
Code:
v2.0
- Everything has been redone from scratch
- Switch to Gitlab and setting up CI
- Remove Barry-Allen (too old)
- Added ZEN I/O governor
- Upstream to 3.18.63
- Check Gitlab for more
v1.8
- PegasusQ cpu governor
- Kcal control
- Hight priority workqueue
- Some build fix
v1.7 | Public release
- Lastest source
- Barry-Allen, Lionfish, ... cpu governor
- FIOPS I/O scheduler
- CRC check disabled
- Spectrum support
- Many more on github
Good work! I'm liking the extra gov options. Performance is great with the default profile at the moment. I believe it's barryallen.
dpryor88 said:
Good work! I'm liking the extra gov options. Performance is great with the default profile at the moment. I believe it's barryallen.
Click to expand...
Click to collapse
Yes, default CPU governor is set to Barry-Allen.
Glad you like the kernel.
New build is up!
Check changelog.
Getting error, finger print hardware not available. Also there are 4 fingerprints saved and I can't delete them. Running smooth other than that
Edit,
Not sure what happened but I can't edit fingerprints anymore, I've even re flashed my old backup and kernel and tried re flashing the rom,
Before I flashed this kernel I took off locks, backed upand the flashed kernel. Not sure what's going on
joshk89 said:
Getting error, finger print hardware not available. Also there are 4 fingerprints saved and I can't delete them. Running smooth other than that
Edit,
Not sure what happened but I can't edit fingerprints anymore, I've even re flashed my old backup and kernel and tried re flashing the rom,
Before I flashed this kernel I took off locks, backed upand the flashed kernel. Not sure what's going on
Click to expand...
Click to collapse
My fingerprint works perfectly, not a kernel issue
GtrCraft said:
My fingerprint works perfectly, not a kernel issue
Click to expand...
Click to collapse
Yeah I don't know what happened but nothing could undo the issue other than a clean install. Which sucks lol cause I have to redo everything and my backup is useless
joshk89 said:
Getting error, finger print hardware not available. Also there are 4 fingerprints saved and I can't delete them. Running smooth other than that
Edit,
Not sure what happened but I can't edit fingerprints anymore, I've even re flashed my old backup and kernel and tried re flashing the rom,
Before I flashed this kernel I took off locks, backed upand the flashed kernel. Not sure what's going on
Click to expand...
Click to collapse
I'm sorry for this.
But it's not a kernel issue.
No one have this issue. Good luck to restore your data
I've been running 1.7 / 1.8 for a few days now using Lionfish governor and i have to say it's pretty awesome. :good:
New build is up!
Check changelog.
Martichou said:
New build is up!
Check changelog.
Click to expand...
Click to collapse
Hey bro there's some interesting features on this kernel. Figured I'd share the link with you https://forum.xda-developers.com/oneplus-5/development/render-kernel-oos-n-eas-r1-t3639839
the download link for this kernel is down. can someone provide a mirror, please?
I don't see any extra cpu governors.
What should i do??
Akshatk said:
I don't see any extra cpu governors.
What should i do??
Click to expand...
Click to collapse
Use the v44 at this thrend:
https://forum.xda-developers.com/showthread.php?p=74525704
matze779 said:
Use the v44 at this thrend:
https://forum.xda-developers.com/showthread.php?p=74525704
Click to expand...
Click to collapse
Not there.
Here is a mirrorlink:
https://www.dropbox.com/sh/xr3qe15mjqee6ps/AACOfo2SLn30rYllGC8krvx-a?dl=0
Closed per OP request
EXTENDED LINEAGEOS/AOSP ARM64 KERNEL
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... Still valid??.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WARNING: THIS KERNEL IS FOR LINEAGEOS/AOSP ROMS ARM64 BASED ONLY
This Kernel aims to use the best and most stable feautures of stock kernel by default and add useful features and optimizations,The idea is to keep it simple, stable and optimized!
The features Are :
Updated To Latest Motorola Kernel Sources (From Alberto97 repo)
Any Kernel Installer Script
Compiled With Latest Google GCC 4.9 & CLANG 8.0.4
ARM64 Optimizations
Update To Latest Linux 3.18.136
Update To Latest kernel.lnx.3.18.r34-rel (pie caf tag)
Added EAS SUPPORT
Added CPU_BOOST
Added Westwood TCP And Set By Default
CFQ I/O Scheduler Upstream Updates And Set By Default
Increased ZRAM size For All Variants
Memory Optimizations
Disabled Some Debugging
Added Sound Control
Added KCAL Color Control
Added K-Lapse Support
Added Backlight Dimmer
Removed additional SafetyNet flagsTo Pass SafetyNet
Misc Tweaks and Optimizations
DOWNLOAD
-------------------------------------
STANDARD OREO/PIE VERSION
EXTENDED KERNEL REV-25 STANDARD
-------------------------------------
Use the app EXKM or kernel adiutor to tweak the kernel!
AFH FOLDER WITH ALL RELEASES
XDA:DevDB Information
EXTENDED KERNEL ARM64 LINEAGEOS/AOSP, Kernel for the Moto G5 Plus
Contributors
attack11, sultanxda , franciscofranco , vache , flar2 , engs.tk , faiyaz
Source Code: https://github.com/attack11/android_kernel_motorola_msm8953
Kernel Special Features: KERNEL FOR LINEAGEOS/AOSP ARM64 BASED ROMS
Version Information
Status: Stable
Created 2017-11-24
Last Updated 2019-03-15
Reserved
Reserved For Changelog
Hi all,Download link is in downloads section AFH is having issues,if people have issues downloading I will upload it to another host asap,Thanks!
Somehow i can't find sound control option in exkm, it was a clean flash btw
SafteyNet is not passing. Don't know if this is an issue with the rom regardless of the kernel. I'm on Los 15.
donjuro said:
SafteyNet is not passing. Don't know if this is an issue with the rom regardless of the kernel. I'm on Los 15.
Click to expand...
Click to collapse
If you're using the 64bit version then you cannot bypass the safetynet
CreasingMass Dev said:
Somehow i can't find sound control option in exkm, it was a clean flash btw
Click to expand...
Click to collapse
Thanks,I didnt enabled and didnt noticed,Will be there in next release ! :good:
donjuro said:
SafteyNet is not passing. Don't know if this is an issue with the rom regardless of the kernel. I'm on Los 15.
Click to expand...
Click to collapse
Yes its a know issue with 64 roms for now
# New Release is out (Sorry for the delay)
- Remove Cpu boost for now (msm_performance input boost works good)
- Compiled now with GCC 4.9 AARCH 64 Google Toolchain
- Optimizations for ARM 64
- Truly enabled sound control
- Memory & Sched Tweaks From Caf
- Incresed Zram Size for 2 gb devices
- Some other misc stuff...
Cheers!
attack11 said:
# New Release is out (Sorry for the delay)
- Remove Cpu boost for now (msm_performance input boost works good)
- Compiled now with GCC 4.9 AARCH 64 Google Toolchain
- Optimizations for ARM 64
- Truly enabled sound control
- Memory & Sched Tweaks From Caf
- Incresed Zram Size for 2 gb devices
- Some other misc stuff...
Cheers!
Click to expand...
Click to collapse
Thanks for the update, does this work with 8.1.0 roms?
CreasingMass Dev said:
Thanks for the update, does this work with 8.1.0 roms?
Click to expand...
Click to collapse
Yes,works in 8.0 and 8.1 roms :good:
# New Update is Up!
- Update To Latest Los 15.1 Sources
- Wireguard Support
- Some other misc stuff...
attack11 said:
# New Update is Up!
- Update To Latest Los 15.1 Sources
- Some other misc stuff...
Click to expand...
Click to collapse
Are you adding eas?
Edit: not trying to sound ungrateful man I'm sorry
zeft64 said:
Are you adding eas?
Edit: not trying to sound ungrateful man I'm sorry
Click to expand...
Click to collapse
Nope,I want to stay close to stock
Hi, I'm new to this, it works for the rom Pixel experience 8.1.0? Thank you!
AugusTroll said:
Hi, I'm new to this, it works for the rom Pixel experience 8.1.0? Thank you!
Click to expand...
Click to collapse
Yes.
jasondutch said:
Yes.
Click to expand...
Click to collapse
I tried to install it but when I start the device it stays in the bootlogo and it does not happen that way, is it possible that it takes so long? Thanks for answering!!
Bootloop on latest ROM.
....
AugusTroll said:
I tried to install it but when I start the device it stays in the bootlogo and it does not happen that way, is it possible that it takes so long? Thanks for answering!!
Click to expand...
Click to collapse
king.ska said:
Bootloop on latest ROM.
Click to expand...
Click to collapse
panamera2011 said:
....
Click to expand...
Click to collapse
Sorry guys, I need to update this, I will make an update in a couple of days
# New Update is Up!
- Update To Latest Los 15.1 Sources
- Updated Kernel Installer and Tweaks
- Compiled Using Clang 6.0.1
- Updated from the scratch, Removed useless stuff...
- Some other misc stuff...
Cheers!
Ultimate Kernel For Samsung Galaxy S6 and S6 Edge
This kernel aims for best balance between battery life and performance and it was on testing for more than 3 months, so you can be sure that this kernel is very stable. Also I dont think to implement synapse it is not supported by me and will never be
Disclaimer:
Code:
/*
* Your warranty is void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
Compiled With Google's TC v4.9
Linux Kernel 3.10.108 Patched
Binder Patch From Linux 4.9
SELinux Permissive
CPU Underclock Support 200mhz both clusters
CPU Overclock Support (1800mhz-A53/2400mhz-A57)
GPU Underclock 100mhz
GPU Overclock 852mhz
CPU and GPU Voltage Controls
Memory Bus Voltage Controls
Fully Working AOD Thanks @AntonioMartitos
Init.d Support Thanks @Noxxxious
Safetynet Bypass
WiFi Forget Fix @Noxxxious
use Android device as USB keyboard/mouse (no driver required; compatible with any OS and BIOS) @minealex2244
DriveDroid Patch @minealex2244
Lot Of CPU Governors and IO Schedulers Added
DT2W Support
Spectrum Support (Profiles Base @Noxxxious)
Optimized HMP
KNOX 0x0
XPAD Support
Wireguard Patch
Frandom Support
Led Controls (FadeLed)
MTweaks (Use Till I Fix Synapse)
!!!DON'T FORGET TO FLASH ROOT (MAGISK OR SUPERSU)!!!
Installation
Go in to TWRP Recovery
Flash Ultimate-Kernel-G920/5-7.0.zip
Now Flash Root (Magisk or SuperSU)
Reboot Phone and You are Good
If you want to contribute just pm me on telegram @enesuzun
If you like the kernel just press thanks button :fingers-crossed:
Downloads:
Ultimate Kernel V1.0
Credits:
The Sickness (his guide and scripts)
Minealex2244 for his kernel repo for being so clear and helpful
Others I've used the commits from
XDA:DevDB Information
Ultimate Kernel, Kernel for the Samsung Galaxy S6
Contributors
enesuzun2002
Source Code: https://github.com/enesuzun2002/Ultimate-Kernel
Kernel Special Features:
Version Information
Status: Stable
Created 2018-05-30
Last Updated 2018-05-30
reserved 2
Just installed on stock rooted rom and testing... good work
Looks great ! Just to be sure, does it work with Ultimate Nougat V3.1 rom ?
sm-a510f said:
Looks great ! Just to be sure, does it work with Ultimate Nougat V3.1 rom ?
Click to expand...
Click to collapse
yes it works pretty fine
enesuzun2002 said:
yes it works pretty fine
Click to expand...
Click to collapse
Thanks, and how does fadeled, XPAD and use phone as keyboard/mouse works ?
Hello,so far seems very good!will there be undervolt support?
Proximity sensor don't work on Frankenstein rom - like stock.
Synapse too, but you said about that.
Seems to be best kernel for 7.0 stock-based ROMs.
Using it with MIPA S8+ Port. No bugs noticed, except maybe ZSWAP:
It keeps getting re-enabled in MTweaks, and I put it at 0%, but now can't change that.
Superb kernel!! Thank you
does it work with Resurrection Remix-OS ? and can you provide me a good camera app for this Resurrection Remix-OS thanks in advance
Does it support S7 Edge battery mod ? Thx
flashed it on my Stock 7.0 G925i for two weeks, it works fine
Wonderful kernel with mtweaks
King-V said:
Seems to be best kernel for 7.0 stock-based ROMs.
Using it with MIPA S8+ Port. No bugs noticed, except maybe ZSWAP:
It keeps getting re-enabled in MTweaks, and I put it at 0%, but now can't change that.
Click to expand...
Click to collapse
Hi how did you install it? Did you have to dirty flash the rom? Then root after? Thanks
very nice kernel, thank you! are you planning to add a double tap to wake function?
How is gaming on this kernel? Thanks
cosmic899 said:
Hi how did you install it? Did you have to dirty flash the rom? Then root after? Thanks
Click to expand...
Click to collapse
Had MIPA already on my device. Flashed this, and then flashed latest Magisk.
I guess this kernel is not working on ultimate Nougat S8 Port?
Regards
Sent from my SM-G960F with Tapatalk
j1gga84 said:
I guess this kernel is not working on ultimate Nougat S8 Port?
Regards
Click to expand...
Click to collapse
Yes it does work on ultimate nougat s8 port mate