Got the update to Android 7 and now the update notification is gone...
so:
a few months ago i got a motherboard problem --> LG fix it for me
a few days ago i got an update notification for andorid 7 (H960A30b).
i couldn't update it right away, because i only had 200MB free left...
[**]so i try it via LG Bridge and with a full wipe --> that did not work (it worked before)
[**]so i did a full reset from the phone --> i got a clean LG V10 with android 6 and since than there is no update notification for android 7 and via LG Bridge also no luck...
also i can't unlock my bootloader anymore... lg says the device-id and imei is no match...
any ideas why i can't update?
Load uppercut and lg up, start uppercut and flash the kdz from lg-firmwares com
Related
I have LG TrueHD LTE P936 phone. Got it yesterday. I was dissappointed by the android version it has 2.3.6, I expect that such a phone should have ICS at least. I downloaded the LG Software update tool and it says it finds an update. Now the update downloads installs and it says update complete, but I don't notice anything different. I ran the update 3 times and it always downloads the same file and installs it and says completed but nothing changes. Can anyone help me update my phone?
I was running a MarshMallow update for the last 6 months and suddenly today morning I just decided to flash the "rootedsystemh960a.tot" from one of the forums here at XDA. First it did flashed the ROM using LGUP but then the Phone was stuck with LG LOGO for minutes and then I flashed it again with my stock UAE MM 6.0 ROM. It did work. Then I reflashed again hoping for the ROOTED ROM to work on my phone and ever since LGUP is giving me this error code with a message " lgup error code 0x2000 invalid command response" and it keeps crashing. Now I have tried to switch windows and tried to flash many ROMs and it wont stand a chance. Why this error message is coming? Can anyone of you experts figure this out? Even the COM ports are matching at LGUP and in my DEVICE MANAGER. Please help me. I am stuck with this mobile. ...:crying:
Little info about my phone. It is a UAE/DUBAI Variant of LG V10 - H960A, and officially I am not allowed to unlock my BOOTLOADER by the LGE itself. I had tried before bootloader unlock modes.. Anyways its not the point here right now.. The main thing is LGUP is crashing again and again.. Is there any other utility in place of LGUP for flashing LG ROMS ????
Well that .tot file was for Lollipop only that was your mistake in this probably and it has corrupted your system somehow. I'm afraid I have no idea how to deal with this phone as I don't modify this one myself because of the lack of development/devs.
I think there is something called LGFlashTool also.
dannejanne said:
Well that .tot file was for Lollipop only that was your mistake in this probably and it has corrupted your system somehow. I'm afraid I have no idea how to deal with this phone as I don't modify this one myself because of the lack of development/devs.
I think there is something called LGFlashTool also.
Click to expand...
Click to collapse
Even flashtool aint doing a job.. When I try to run Get device info from within the LG FlashTool, the application crashes...God! Cant they develop some stable running apps for their customers?
Hi,
can you enter the download mode on your V10? Then it might be possible to flash a clean (unrooted) MM via LG Bridge. Some time ago I tried to install the latest MM Version V20e on my V10 with LGUP. For some reason that failed and left me with a phone without ROM, too. Afterwards the V10 was not recognized by LGUP anymore.
Luckily I was still able to enter the download mode manually. So I connected the phone to my PC and started LG Bridge which still did recognize it as a V10 H960a. So selecting Firmware update and then clicking in the bottom right corner of the window on a link saying something like "repair flash errors" or "repair update errors" (I'm currently at work and cannot check) did a complete clean install of the latest firmware.
Maybe you're lucky and this works for you too.
cyvr1 said:
Hi,
can you enter the download mode on your V10? Then it might be possible to flash a clean (unrooted) MM via LG Bridge. Some time ago I tried to install the latest MM Version V20e on my V10 with LGUP. For some reason that failed and left me with a phone without ROM, too. Afterwards the V10 was not recognized by LGUP anymore.
Luckily I was still able to enter the download mode manually. So I connected the phone to my PC and started LG Bridge which still did recognize it as a V10 H960a. So selecting Firmware update and then clicking in the bottom right corner of the window on a link saying something like "repair flash errors" or "repair update errors" (I'm currently at work and cannot check) did a complete clean install of the latest firmware.
Maybe you're lucky and this works for you too.
Click to expand...
Click to collapse
Well hello, I found the solution for my problem and I was able to flash the ROM successfully. Its some kind of new utility amalagamated with LGUP and it does flash without any problems. Found out it was related to some corrupt dll file or incompatible file I had in my LGUP library for the ROM FLASHING to fail all the time... You just read this first post on this link and you will be all fine. Trust me ...:highfive::good::fingers-crossed::fingers-crossed:
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
Just dont forget to follow the rules exactly as mentioned and if you can run it in the Virtual Machine I would prefer you to do that but you have to do everything like installing LG DRIVERS + LGUP + LGUP DLL FILE + UPPERCUT as mentioned in this post. Because if you are running antivirus on your PC, it will detect this UPPERCUT TOOL as some trojan horse or some kind of malware. I did that in my VM as I already had my VM configured for my LG V10 Flashing process.
Do it and do let me know should you encounter any problem. May be I can help later on.
Hi
i purchased lg v10 h901 2 months ago. from last week its automatically rebooting. i just download H90120j_00_0712.kdz and flash with lgup. after that it wont boot (no display) mean hardbrick.
after searching i just debrick my device. now i have just download mode with no rom on my v10 and almost flash every rom listed below with lgup and also tried lg bridge update but same every time (hardbrick).
Lg flash tool says (s) loads to failed and lgflashtool2014 shows contact the system administrator.
the problem is i cant find the exact kdz. lgup shows h90121j, lg bridge shows h901BK and on back under the bettery lg v10 h901 made in korea. i dont know what to do. Any help? :crying::crying:
Roms i tried
F600K20e_00_0216
F600S20l_00_0503
F600L20e_00_0216
H90120e_00_0316
H90120j_00_0712
H90120l_00_1004
H90130b_00_0523
H90130c_00_0914
Hi
i purchased lg v10 h901 2 months ago. from last week its automatically rebooting. i just download H90120j_00_0712.kdz and flash with lgup. after that it wont boot (no display) mean hardbrick.
after searching i just debrick my device. now i have just download mode with no rom on my v10 and almost flash every rom listed below with lgup and also tried lg bridge update but same every time (hardbrick).
Lg flash tool says (s) loads to failed and lgflashtool2014 shows contact the system administrator.
the problem is i cant find the exact kdz. lgup shows h90121j, lg bridge shows h901BK and on back under the bettery lg v10 h901 made in korea. i dont know what to do. Any help?
Roms i tried
F600K20e_00_0216
F600S20l_00_0503
F600L20e_00_0216
H90120e_00_0316
H90120j_00_0712
H90120l_00_1004
H90130b_00_0523
H90130c_00_0914
still nothing?
So I searched on internet to find any solution of the problem i am facing and i couldn't find one. I had a rooted LG G5 (RS988) with the nougat version RS98821c, or at least that's what LG UP is detecting now. I decided to do a factory reset (first mistake). The phone started looping by rebooting into my TWRP recovery, So I wiped data and cache, and then tried flashing the KDZ file RS98811c (It's the only thing available for my device on LG's website) via LGUP. But after booting into firmware update (second mistake ) the LG UP tool won't allow me flashing RS98811c no matter what option i choose. The firmware on LG website is MArshmallow and I had Nougat so i guess that's that. Now there are other 3 files, i tried 2 of them RS98810h and RS98810d, same problem. Tried flashing recovery via fastboot too but it won't boot into recovery anymore. Now my device can only go into fastboot or Firmware update. So what are my options now? Is my device truly ****ed? coz i don't have warranty now and i am no more in US now (The device is from US).
akshay.shah said:
So I searched on internet to find any solution of the problem i am facing and i couldn't find one. I had a rooted LG G5 (RS988) with the nougat version RS98821c, or at least that's what LG UP is detecting now. I decided to do a factory reset (first mistake). The phone started looping by rebooting into my TWRP recovery, So I wiped data and cache, and then tried flashing the KDZ file RS98811c (It's the only thing available for my device on LG's website) via LGUP. But after booting into firmware update (second mistake ) the LG UP tool won't allow me flashing RS98811c no matter what option i choose. The firmware on LG website is MArshmallow and I had Nougat so i guess that's that. Now there are other 3 files, i tried 2 of them RS98810h and RS98810d, same problem. Tried flashing recovery via fastboot too but it won't boot into recovery anymore. Now my device can only go into fastboot or Firmware update. So what are my options now? Is my device truly ****ed? coz i don't have warranty now and i am no more in US now (The device is from US).
Click to expand...
Click to collapse
Update : I forgot to mention, I tried LG Bridge (it doesn't recognize my device) I tried LG support tool(it needs MTP enabled i suppose, since my device won't boot it isn't possible), it does recognize the device but says i am on the latest firmware for my product.