Related
Hey I recently rooted my Samsung Galaxy S II I9100, at first everything was fine, but i had some trouble installing apps so i used es file manager to install them, it began to work for some apps. anyway, this morning I woke and turned it on and it didn't get past the bootscreen(i left it for about 45 minutes on one occasion, and I tried rebooting many times.
The first thing i did after attempting to boot my device was to flash the kernel again via odin, this did not work(tried twice).
so i did a lot of research over the past 10 hours into my problem and have tried many different things; installing a stock rom, removing battery, pretty much anything on the forums that people said have worked. nothing.
I can get into recovery mode and download mode.
I don't care about my data on my phone, it has already been wiped.
It's still covered by warranty so i can wipe the flash count(?) and send it in for warranty IF I HAVE TO. preferably not however.
although i highly doubt it, I may have been using the wrong rom, and I may have forgotten to reset my phone before one of the re-flash's
So if you havn't figured out my question by now, how do i return my phone to working condition?
Don't get mad at me for making a thread that has probably been made a hundred times, none of the solutions in the other threads fixed my problems, and I was browsing not only xda but other forums for hours, I found that reason enough to post a new thread. Apologies if this is in the wrong section, I am new here, and never found it necessary to create an account until now, when I couldn't find a solution.
Help is appreciated, this problem is really rustling my Jimmies on Christmas day.
because this is such a problem, I will REWARD anyone who presents a working solution that does not involve sending it off for warranty or buying a jig. Sorry if i missed out some information, please request for missing info in a response.
1.forget about warranty and jig....that has nothing to do with your current situation.
2.post the details about your phone and what firmware your on and what crap you were flashing.
Maybe a simple reset/wipe in stock recovery is needed.
.
theunderling said:
1.forget about warranty and jig....that has nothing to do with your current situation.
2.post the details about your phone and what firmware your on and what crap you were flashing.
Maybe a simple reset/wipe in stock recovery is needed.
Click to expand...
Click to collapse
originally i was on ics 4.0.3, and i used this tutorial galaxys2root.com/galaxy-s2-root/how-to-root-galaxy-s2-i9100-icsandroid-4-0/ (can't post url link because im a new user) and this kernel by the file name "CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5.tar". I then searched for stock roms for it and got "CF-Root-SGS2_XX_OXA_KP8-v5.2-CWM5.tar" and "CF-Root-SGS2_XX_XEO_LPQ-PROPER-v5.4-CWM5.tar"
If you want a stock rom go to Sammobile,join(so you can download).....then input smartphone>android>your phone model>your country/carrier.
Choose whatever 4.0.3 it recommends after you input the above and hit send.
Then flash that with Odin and see what happens.
Then report back here.
I am from Australia and when I searched for roms for the I9100, no Australian roms showed :s
would one from another country work, or would that be locked or...?
Theres 3 listed for starters for the plain gt-i9100.....is that your exact model....or is it p/g/m etc.
This is why I asked for your model.
gt-i9100 is my model that's all it said in my phone information in the settings (before it stuffed up), manual, on start up and in download mode.
sorry, I'm not excellent with my technical android terminology.
false alarm, it just didn't load properly before, I will start a the download (will take like 15 minutes) and report back when i flash it. gt-i9100 is definitely my model.
You just input which one of these 3 applies,hit send,then download.
Then flash it (the extracted file)in download mode with Odin.
so i put the extracted file in the 'PDA' field, put it into download mode, plug it in and start the process?
Yep.
It failed the first 2 tries, I think I have a bad usb cord, but worked the third, might of been what stuffed it up in the first place maybe (?), thank you so much for your help man
Good.Wait til boxing day til you flash siyah-s2.v.4.1.5 kernel for root.......lol.
hehe... yeah... I'm not going to try root again... lol
syntaxibles said:
It failed the first 2 tries, I think I have a bad usb cord, but worked the third, might of been what stuffed it up in the first place maybe (?), thank you so much for your help man
Click to expand...
Click to collapse
Going back to your first post,maybe you could make a donation to one of the developers on this site of your choosing.
sounds good, which developer in particular would be a good choice?
I quite like Doomlord,but its up to you
And just post back on this thread if you need help rooting etc.
Hello first time rooting this phone. Its a SGH-I777. I used the guide from galaxys2root.com/. At first it didnt work because my computer didnt recongnize my phone. I tried a different computer and it seemed successful until it rebooted. When the phone rebooted it did nothing but stay on the first screen. I still have the ability to get into Odin mode(download mode), but that is it. When i put the phone in download mode and use Odin it allows me to download the "zimage" but after rebooting it is the same exact thing. I have tried the one click root, one click factory restore. Tried restoring it on Kies. and nothing work took it to a store and the guy said he tried but it would stop in the middle of the download the only option i had with him was purchasing a new mother board for $80. Does anyone have a solution that can help me fix my phone.
Before i attempted to root it, it had OS 2.3.6 with kernal 2.6.35.7.
Go to the development section and read the stickies. There you will find stock rooted packages you can flash with Odin.
Sent from my SGH-I777 using xda premium
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
creepyncrawly said:
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
Click to expand...
Click to collapse
the only option that i have is to put the phone in download mode. when i try to download any kernel it reboots and does not go past the booting screen with the triangle.
jmula said:
the only option that i have is to put the phone in download mode. when i try to download any kernel it reboots and does not go past the booting screen with the triangle.
Click to expand...
Click to collapse
You should be able to enter recovery. Hold down all three buttons, vol+ vol- and pwr, continuously until the phone boots into recovery. It could take 10 or 15 seconds or more. If that is unsuccessful, then since you can enter download mode, you will need to flash back to stock, or stock plus root. That is not just a kernel, but the entire package. Please see the links in my sig for instructions.
The dropbox links in the download repository are temporarily suspended until probably Monday night or Tuesday as someone abused and over-downloaded. But the hotfile links still work.
creepyncrawly said:
You should be able to enter recovery. Hold down all three buttons, vol+ vol- and pwr, continuously until the phone boots into recovery. It could take 10 or 15 seconds or more. If that is unsuccessful, then since you can enter download mode, you will need to flash back to stock, or stock plus root. That is not just a kernel, but the entire package. Please see the links in my sig for instructions.
The dropbox links in the download repository are temporarily suspended until probably Monday night or Tuesday as someone abused and over-downloaded. But the hotfile links still work.
Click to expand...
Click to collapse
i Downloaded ''UCLE5 Stock ICS plus Root'' . i placed the phone in download mode started Odin and placed file in PDA. It starts but gets stuck at cache.img
jmula said:
i Downloaded ''UCLE5 Stock ICS plus Root'' . i placed the phone in download mode started Odin and placed file in PDA. It starts but gets stuck at cache.img
Click to expand...
Click to collapse
The next thing I would suggest is to try and flash the UCKH7 full stock package with bootloaders. However, as the dropbox links in the download repository are currently suspended, you will have to download it from SamFirmware. To be able to download, you will need to register for free if you havn't already. Search sgh-i777 in the upper right hand corner of the page, then download the I777UCKH7 version. Let us know if that will flash.
Ok it finally wokred after countless times of changing usb ports. I used the one click recovery. It restroed my phone to 2.3.4 i had 2.3.6. I tried to update by kies to 4.01 and it didnt work. Kies froze. The queestion is how do i safltey root the phone?
jmula said:
Ok it finally wokred after countless times of changing usb ports. I used the one click recovery. It restroed my phone to 2.3.4 i had 2.3.6. I tried to update by kies to 4.01 and it didnt work. Kies froze. The queestion is how do i safltey root the phone?
Click to expand...
Click to collapse
Flash a .tar version of a custom kernel with Odin. I always use an old siyah.tar, but that's just me. There are other methods floating around but that's the quickest and easiest for me. I think there's an old entropy dd.tar around somewhere too. But just flash it through Odin and you're good to go, assuming you flashed one for your version of android. If you just want to get into recovery to flash something this works as well.
There may be links to tar versions of the kernels in creepy's sig I don't remember offhand.
Ok since i do not want to brick my phone again where it is just stuck at the boot loop. I tried looking for ways to root and when i tried some of them my phone went back to the problem it had it the beginning. Should i just call it quits or do you guys have a guide?
jmula said:
Ok since i do not want to brick my phone again where it is just stuck at the boot loop. I tried looking for ways to root and when i tried some of them my phone went back to the problem it had it the beginning. Should i just call it quits or do you guys have a guide?
Click to expand...
Click to collapse
Give up???
I personally don't think flashing a kernel with odin is the best way to root. It increments the flash counter, for one thing, though I'm not sure how many people care about that anymore. I would suggest that you use the stock plus root package to root the phone with odin. See the links in my sig.
Guide... did someone say guide?
Feeling the pain....
creepyncrawly said:
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
Click to expand...
Click to collapse
First, to Creepy....you've been a great resource here and I read a lot of what you post and you got me out of the very jam being discussed here. I made the mistake of trying to root via the galaxys2root.com site (actually, I thought it was a different site...was redirected), got the i9100 screen and a boot loop...couldn't go anywhere. I came back here and found resources eventually unrooting my phone all the way back to 2.3.4, then moved to 2.3.6, then the stock android 4.0.3 which updated to 4.0.4.
But I still want to root (4.0.4 shuts itself down A LOT...more than 4.0.3) and I have a Galaxy note 10.1 with JB 4.1.2 and I LOVE IT! I feel on a mission to get rooted and try out some of the JB roms I see talked about here, but can't seem to find the best way to root. I've heard exynosabuse referenced here (no links to it though) and I don't want to use the wrong one and mess up my phone. I've been reading for weeks here and there's obviously a lot of great material, but I'm not sure which material is critical to understand, and which is "nice to know" but might not even apply, and which material isn't even right. Very frustrating.
Judi
judib said:
First, to Creepy....you've been a great resource here and I read a lot of what you post and you got me out of the very jam being discussed here. I made the mistake of trying to root via the galaxys2root.com site (actually, I thought it was a different site...was redirected), got the i9100 screen and a boot loop...couldn't go anywhere. I came back here and found resources eventually unrooting my phone all the way back to 2.3.4, then moved to 2.3.6, then the stock android 4.0.3 which updated to 4.0.4.
But I still want to root (4.0.4 shuts itself down A LOT...more than 4.0.3) and I have a Galaxy note 10.1 with JB 4.1.2 and I LOVE IT! I feel on a mission to get rooted and try out some of the JB roms I see talked about here, but can't seem to find the best way to root. I've heard exynosabuse referenced here (no links to it though) and I don't want to use the wrong one and mess up my phone. I've been reading for weeks here and there's obviously a lot of great material, but I'm not sure which material is critical to understand, and which is "nice to know" but might not even apply, and which material isn't even right. Very frustrating.
Judi
Click to expand...
Click to collapse
The ExynosAbuse application is the only practical way to root 4.0.4 without changing base. You can download it as an attachment in the OP of the developer's thread, but read through the thread first to understand its limitations and risks.
Alternatively, you could flash 4.0.3 plus root from the development forum. If you choose that route, please read the thread to understand how to install a custom kernel, which is recommended whether you plan to install a custom firmware or not. The custom kernel will contain ClockworkMod Recovery so you can flash the firmware of your choice if you wish.
There are really several routes you could choose. All of them work. Another would be to flash back to stock Gingerbread plus root. For that see my guide How to Flash Custom Binaries Without Ever Incrementing the Flash counter!! (link in sig)
Hmmmmm..
Well, I see that their are many, more experienced than me following this thread and my following comment is not meant to jump on the knowledge train here, but............... I had the same event happen as the orig poster earlier today. I had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII, What I did was go into recovery ,cleared the Dalvik cache and that is all I cleared. Then I re-installed the RR Rom .rar, which I keep on my SD, over everything and rebooted, it came back as it was 4 mins before . All I did after, was do a system restore(only) using Titanium BU. So when I see all the "clear and restore this and that" I started to doubt some of the more experienced than I. My 2 cents is, that, if one does not know EXACTLY ,how to correct an issue,leave it for our more knowledgeable brothers and sisters.
If I am wrong ,please except my appology.
b0bb said:
Well, I see that their are many, more experienced than me following this thread and my following comment is not meant to jump on the knowledge train here, but............... I had the same event happen as the orig poster earlier today. I had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII, What I did was go into recovery ,cleared the Dalvik cache and that is all I cleared. Then I re-installed the RR Rom .rar, which I keep on my SD, over everything and rebooted, it came back as it was 4 mins before . All I did after, was do a system restore(only) using Titanium BU. So when I see all the "clear and restore this and that" I started to doubt some of the more experienced than I. My 2 cents is, that, if one does not know EXACTLY ,how to correct an issue,leave it for our more knowledgeable brothers and sisters.
If I am wrong ,please except my appology.
Click to expand...
Click to collapse
I don't know what you're trying to get across here. Yes, restoring a backup nandroid works. Yes, you can try wiping cache and dalvik to see if it fixes an issue. Yes you can restore apps via titanium backup. All these things are indeed true.
Phalanx7621 said:
I don't know what you're trying to get across here. Yes, restoring a backup nandroid works. Yes, you can try wiping cache and dalvik to see if it fixes an issue. Yes you can restore apps via titanium backup. All these things are indeed true.
Click to expand...
Click to collapse
Well if you did not fully grasp what I was trying to get across,you seemed to get it correct with your statement.
b0bb said:
Well if you did not fully grasp what I was trying to get across,you seemed to get it correct with your statement.
Click to expand...
Click to collapse
And yet you say, "All I did after, was do a system restore(only) using Titanium BU." This may have worked for you, but this is an absolute recipe for disaster, and should not be given as a recommendation.
And further, from what you say, you did not have the "same event happen as the orig poster." Instead you "had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII." This is by far not the same as trying to root with a tool from GalaxyS2Root.
creepyncrawly said:
And yet you say, "All I did after, was do a system restore(only) using Titanium BU." This may have worked for you, but this is an absolute recipe for disaster, and should not be given as a recommendation.
And further, from what you say, you did not have the "same event happen as the orig poster." Instead you "had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII." This is by far not the same as trying to root with a tool from GalaxyS2Root.
Click to expand...
Click to collapse
Hey Bro, I think you think that I am challenging you, trust me I am not and I thank you for correcting me and putting me in my place, which is a bit phone techie challenged, I'll stick to building submarines. Thanks for what you do here.
b0bb said:
Hey Bro, I think you think that I am challenging you, trust me I am not and I thank you for correcting me and putting me in my place, which is a bit phone techie challenged, I'll stick to building submarines. Thanks for what you do here.
Click to expand...
Click to collapse
Not at all. I want people to help others here. I want you to help other here as well. But it is important to post only accurate information. Inaccurate information can cause someone to do the wrong action. So I always correct misinformation.
Hello,
I am reaching out one last time to see if I can get my tablet back to the way it was, before I messed it up doing the CWM install. I am going to put as much information on what I have done and be as clear as I can.
I am trying to avoid sending it in to Lenovo and try for a warranty, or paying $50 deductable to AT&T for my Full Protection Plan I am paying for each month on this FREE tablet I got from a promotion.
My device Info:
Lenovo IdeaTab A2107A-H on AT&T purchased at AT&T, Rooted with CWM Touch, European Stock Rom.
First thing I did was root using this thread, method 1 with 4.03root. This worked fine. I tried several times to Backup and install CWM with this method using MobileUncle. I even tried the “updates” that were posted there. Now, there is only one use to be three or four.
Second, I followed this on another site through a Google search to make a scatter-text and a back-up on my PC. This part of my problem now as I did not realize the back-up did not do a complete back-up of the tablet as I thought. It skipped some important files, “ANDROID” and “NVRAM” .
Third, I posted on the thread in the first link for help because I could not get CWM on no matter what I tried, and ursulavasey was nice enough to email me some programs and instructions. Using pemergency’s thread here. Which formats the tablet to install CWM
.
My major problem is, with the custom ROMs I have tried, FoxTrot, Tesmart, and the European Stock from here. It will not connect to the AT&T Network correctly. I can reset the IMEI number and connect but, it will drop out a lot and will not run on 3G. Except the Euro Stock, it says 3G in the notification area, it just seems slower than the OE Rom. I also downloaded a Stock Rom that was in two zip files and not sure how to get them into one file to flash, can’t find the link for that one though.
Just for fun I re-followed the GSM Hosting scatter-text thing again with my wife’s tablet and got a better back-up. Everything worked great, However when I flashed it to mine it will not let me reset the IMEI number with DroidTools.
So basically… Is there a way to fix this and put the OE Stock AT&T Rom back on somehow? or Can I re-write something in the back-up from my wife’s to get it to take my IMEI?
Sorry this is long, I wanted to get as much info in the OP as I could. Thank You for your time, ANY help would be appreciated. I hope I put this in the correct section, If not I apologize.
SOLVED! Except one small thing.
Well, I managed after trial and error to merge my incomplete back-up with the complete back-up of my wifes tablet. I used all the files from mine, added in her "Android" folder and CWM, formated and flashed with SPFlash Tool. At first the tablet would not boot to the OS, it would boot into CMW. So I tried a "Factory Reset" from there, and rebooted and successfully got the OS up. Then I could Root it again, replace IMEI number and setup the tablet again.
The only small thing I can not seem to make go away is the "NVRAM WARNING: Err = 0x10" in the Wifi Settings. I have tried several methods to make this go away. Nothing so far worked permently, only until a reboot or a screen unlock. I did not get this when I flashed my merged back-up using the "stock recovery" instead of CWM, so I think it is that recovery.
What is this "NVRAM WARNING: Err = 0x10" anyway and is it a major or minor problem?
I can't remember exactly what methods I tried, Is ther one that works 100%?
So a complicated story:
I bought a transformer prime some time ago then rooted it and installed WOOKIE rom (http://forum.xda-developers.com/showthread.php?t=1674827) then it's sat unloved for a few months.
However I've tried to resurrect it for the festive period and am in trouble. (I've been a keen user of the roms on here for many years, with a smart phone for over 10 years, so I'm not completely thick!)
I'm trying to get paranoid android on it;
However, as soon as I go to CWM and try to install the ROM I get a terrible error message, (Will update once I can get it on my screen but it's on 0% charge currently) but can roll back to install a backup, so that's not the end of the world.
So my issue is how do I get from what I have to where I want to go to?
I think the solution is as follows:
a) I need to get Clockwork ROM working well first. Any ideas?
b) I need to downgrade the ROM to something, But I'm unsure what
c) If a and b are in place, I think I can do the rest.
Please help me! All this talk of downgrading roms has confused me.
1. Let go of CWM. No one uses it anymore. Download TWRP here: http://teamw.in/project/twrp2 It will probably fix your errors and it has a lot more features than CWM, is more polished etc.
2. Without NVFlash you can't downgrade. Here is guide how to do it: https://www.androidroot.mobi/pages/guides/tegra3-guide-nvflash-jellybean/ If you don't want to downgrade I recommend you to install CMB rom http://forum.xda-developers.com/showthread.php?t=2501812 It's Android 4.3.1, everything works and is probably fastest ROM that we can get on our primes.
Thank a bunch zdenko1.
I'm on the case, however I left my laptop entirely flat overnight, so it's upto 0% and 3% charged. And it's Christmas eve!
It's really good to have someone help me out with a bit of detail - so thanks for this.
If I don't post, assume it works, and here's to a peaceful Christmas break to you all
Now I think I have cooked my goose!
I was unable to get anywhere with this,
So with an air of confidence I ran a program (again the name escapes me) which lets you return your computer back to stock, from which one is able to get it working and you're back to square 1.
Great I thought and as ususal I throw my self both feet in.
It formats fine etc until it asks me to get the original update ROM/blob I think -
which I didn't have, so hen tried to download it and couldn't find it.
So now I think it really is screwed
Nothing formatted, I can't enter recovery mode and things are looking bad.
Does ODIN work/provide an answer? If so please help!
Of course I realise that ODIN is Samsung own!
So I think I need a ROM/BLOB that restores me to a working copy via bootloader?
Is that on the right line?
Just seeing if I have to give this up as lost and sell as broken or can it be resurrected?
Sent from my SM-N9005 using XDA Premium 4 mobile app
DO NOT INSTALL ANY OTHER RECOVERY WHILE USING THE NEW 4.2.1 BOOTLOADER, THEY ARE NOT COMPATIBLE AT THE MOMENT, THE ONE BUILT IN IS MODDED. USE THE DOWNGRADE ZIP TO TAKE YOU BACK TO 4.1.1 BOOTLOADER AND RECOVERY IF YOU NEED IT.
Click to expand...
Click to collapse
Using the link you provided in the OP, scroll down until you see the downgrade hairybean 4.1.1 bootloader and recovery. That should get you to a point of being able to flash a new rom.
I'm gonna go out on a limb here & ask a question that's been on my mind for a while, so bear with me. But first, let me give you some background so there's no confusion & no unnecessary questions asked. I'm by no means a "pro" at modifying my Note 3, I just follow instructions carefully & then implement those directions to achieve results. That's how I rooted my Note 3 but could still care less that I tripped Knox in the end.
I have the 32 GB Sprint Galaxy Note 3 with an 8 GB microSD. It's rooted using Chainfire's method. I also have TWRP for a recovery, but I'm using the stock Sprint ROM that came with it. I have a few root apps installed (Titanium backup, AdAway & Root Explorer) but the rest are what Sprint (& Android) put in there, minus a few that are totally unnecessary for me...(chat apps, picture drawings, step counting & so on) that were removed with Titanuim. It's still on 4.3 Jellybean with PUBMJ4 baseband. I also have the Wi-Fi hotspot fixed through 2 file replacements using Root Explorer.
Now that you know what I have, onto the question...
I see many, many ROMs in other threads that I'd like to try out, but don't know how to go about doing this. Before you jump right in & answer, here's my problem. If I try a ROM but don't like it, or it doesn't suit my needs, how can I go about going back to what I have now in the best (& fewest) steps necessary? In other words, to go back to exactly what ROM I have now, the apps installed, baseband, the whole nine yards. Just like a computer backup, it's a bit-for-bit restore, completely mirroring the hard drive. Understand?
Maybe you could explain to me like I'm seven years old what apps I need, what procedures are taken, the order in which they happen & so on. If I need an app or two to do just this, I have approximately $20 Google Play credit left.
Can a DEV or an experienced person that's done just this help a fellow out? Don't get me wrong, the stock ROM I'm using works for me, but there's ROMs posted that look just awesome! It's all about "personalization", am I right?
Easy, since you have a custom recovery installed (twrp) , you simply do a "nandroid" backup (I personally like to backup to an external SD card, so get a bigger one) before wiping and installing something new. If you like what you got, fine. If you want to go back, wipe and restore! Easy Peasy!
Sorry, being a father means sometimes your time suddenly becomes unavailable. But believe me, it's really easy once you figure out twrp.
I'll let another fine member get more details if you actually need them. ?
Sent from my calculator watch.
So did you figure it all out?
Sent from my SM-N900P using Tapatalk
kingdazy said:
Easy, since you have a custom recovery installed (twrp) , you simply do a "nandroid" backup (I personally like to backup to an external SD card, so get a bigger one) before wiping and installing something new. If you like what you got, fine. If you want to go back, wipe and restore! Easy Peasy!
Sorry, being a father means sometimes your time suddenly becomes unavailable. But believe me, it's really easy once you figure out twrp.
I'll let another fine member get more details if you actually need them. ?
Sent from my calculator watch.
Click to expand...
Click to collapse
Doing a Nandroid backup as we speak! I didn't realize TWRP could do that. (duh! ) I only installed TWRP because I just liked the name of it. TWERP!! (gotta nice sound to it, doesn't it??) Thanks a bunch! :good:
tonyevo52 said:
So did you figure it all out?
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
I did. I found a Youtube link on how to do a TWRP backup on the Sprint Note 3. Easy Peasy as said above! I'll try some ROMs this weekend (can't promise nuthin' cause it's gonna be 70 degrees this weekend & I'm itchin' to ride my mountainbike along the boardwalk at the Virginia Beach.)
But now that the hard part is outta the way, it's all easy street from here!
Just be sure to Please, oh god Please, read all instructions on any rom you decide to try. Doesn't hurt to read the last 10 pages of each too, get an idea of Current issues that may not be documented in the OP.
And don't get lazy, follow word for word. The only times I f*cked stuff up was when I didn't follow instructions (ie, thought my experience meant I knew best), or just got sloppy.
And, don't forget to wipe! (I wipe 3X, everytime, as a habit. Some people will give you reasons why that's unnecessary, but I can say confidently, if perhaps anecdotally, that I Never have the issues others have with bad flashes, softbricks, FCs, etc.)
Something to get comfortable with, even though you may never need it is ODIN. It's most common use is a utility for flashing stock ROMs and firmwares, great for recovery from bad things. Again, you may never need it, but have it ready in your Pc with a stock ROM file, just in case.
Finally, Titantium Backup can be your best friend, if used properly. It can also be a real pain, so don't become too dependant on it.
FIN
Sent from my calculator watch.
kingdazy said:
Just be sure to Please, oh god Please, read all instructions on any rom you decide to try. Doesn't hurt to read the last 10 pages of each too, get an idea of Current issues that may not be documented in the OP.
And don't get lazy, follow word for word. The only times I f*cked stuff up was when I didn't follow instructions (ie, thought my experience meant I knew best), or just got sloppy.
And, don't forget to wipe! (I wipe 3X, everytime, as a habit. Some people will give you reasons why that's unnecessary, but I can say confidently, if perhaps anecdotally, that I Never have the issues others have with bad flashes, softbricks, FCs, etc.)
Something to get comfortable with, even though you may never need it is ODIN. It's most common use is a utility for flashing stock ROMs and firmwares, great for recovery from bad things. Again, you may never need it, but have it ready in your Pc with a stock ROM file, just in case.
Finally, Titantium Backup can be your best friend, if used properly. It can also be a real pain, so don't become too dependant on it.
FIN
Sent from my calculator watch.
Click to expand...
Click to collapse
No worries! As I said in the OP, I follow directions carefully. I read everything.
Odin is my friend as well. I have it installed on my laptop. That's how I flashed basebands & deodexed stock rooted ROMs on my Galaxy S III. I also have the original stock Sprint ROM for this GN3 "just in case", in a folder sitting on my desktop with a few extra tools. I've never bricked a phone, unless you count using Samsung's online update (can't think of the name at the moment). It said 4.3 was available, so I downloaded it. It flashed, rebooted, but stuck there. Never finished the boot, just gave me an error code. Samsung's own update killed my GS3 & was unrecoverable. Believe me, I tried everything. What was strange, was the ROM was 4.3 but the baseband was the previous version, not the newer one, so the phone just puked. It never updated the baseband so it bricked. Now, I tried (and used) different radios with no problems before the update. Everything worked in harmony. Go figure!
Time for sleep my friend. Gotta work in the morning!