Related
Please help
i installed huawei u 8110 rom to huawei u8180
then mobile canot started or boot and cannot able another rom
please help
how can i solve this problem
I think you have to go tp this thread: [GUIDE]All Huawei new&old phones-Install Stock Rom-Full Reset.
Choose the right U8180 Stock ROM then flash it.
luks_p said:
I think you have to go tp this thread: [GUIDE]All Huawei new&old phones-Install Stock Rom-Full Reset.
Choose the right U8180 Stock ROM then flash it.
Click to expand...
Click to collapse
But i can't flash stock rom by holding volum up + down + power keys
nothing appear
the only way i can work with mobile now is fastboot
is there any way to flash stock rom via fastboot?
thank you for help
DrAHMED99 said:
But i can't flash stock rom by holding volum up + down + power keys
nothing appear
the only way i can work with mobile now is fastboot
is there any way to flash stock rom via fastboot?
thank you for help
Click to expand...
Click to collapse
flash clockworkmod recovery via fastboot and then flash say, CM7 via CWM.
http://forum.xda-developers.com/showthread.php?p=17496969
then install CM
http://forum.xda-developers.com/showthread.php?p=17496969
ares93 said:
flash clockworkmod recovery via fastboot and then flash say, CM7 via CWM.
http://forum.xda-developers.com/showthread.php?p=17496969
then install CM
http://forum.xda-developers.com/showthread.php?p=17496969
Click to expand...
Click to collapse
i flashed clockworkmod recovery via fastboot but mobile cannot inter to clockworkmod
note:
mobile screen is black and dont disbly any thing even the icon of charging
only can i inter mobile via fastboot through computer
any way to flash stock rom via fastboot
as i flash recovery.img
thank you for help
DrAHMED99 said:
i flashed clockworkmod recovery via fastboot but mobile cannot inter to clockworkmod
note:
mobile screen is black and dont disbly any thing even the icon of charging
only can i inter mobile via fastboot through computer
any way to flash stock rom via fastboot
as i flash recovery.img
thank you for help
Click to expand...
Click to collapse
You can enter cwm by pressing power+volume up until cwm boots when the phone is turned off. CWM wont start on its own just because your buggered up your rom. it wont give you that fancy "connect to computer and well do all the work for you" screen. You need to manually select the rom file and flash it via the "install zip from sd card" command. dont forget gapps when you're flashing CM7, or you wont have market.
There ya go: http://www.addictivetips.com/mobile...-and-how-to-use-it-on-android-complete-guide/
I press power+volume up long time but cwm not boots and screen still black , dont display any thing but i feel mobile vibrate and nothing else
thank you for help
DrAHMED99 said:
I press power+volume up long time but cwm not boots and screen still black , dont display any thing but i feel mobile vibrate and nothing else
thank you for help
Click to expand...
Click to collapse
In that case you might want to try flashing the original recovery via fastboot. Where you can find that, I don't know. Possibly in a stock rom. Don't worry though, as long as your computer recognizes it, its only a soft brick. It should be salvageable. Gimme a sec and i'll try to find a recovery img for you.
EDIT: its also possible to flash it via adb. but i've never done it via adb before. i need to read into it before i recommend anything.
EDIT2: try sending a pm to subpsyke. he's far more skilled in this than i am. maybe he can help you.
Dear ares93
thank you very much for help
No problem, mate.
I have a recovery.img from a CWM backup of me own Huawei u8180. Unfortunately its a CWM recovery file so its not stock. Just keep in mind that there's no guarantee it'll work, it might even brick it completely. While I don't believe that'll happen, there's always a chance. But if you want to try it out i can upload it for you.
Like I said, I'm fairly new at this. I spent a lot of time with Windows mobile roms, but android is new for me.
ares93 said:
No problem, mate.
I have a recovery.img from a CWM backup of me own Huawei u8180. Unfortunately its a CWM recovery file so its not stock. Just keep in mind that there's no guarantee it'll work, it might even brick it completely. While I don't believe that'll happen, there's always a chance. But if you want to try it out i can upload it for you.
Like I said, I'm fairly new at this. I spent a lot of time with Windows mobile roms, but android is new for me.
Click to expand...
Click to collapse
If you mean CWM backup that restore via clockworkmod its not useful for my case ; because my mobile now cannot inter clockworkmod.But it can recognized
via fastboot through computer cmd commands like these:
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash boot boot.img
etc
Is there any way to flash firmware or rom to my huawei u8180 like that?
thank you for your effort
DrAHMED99 said:
If you mean CWM backup that restore via clockworkmod its not useful for my case ; because my mobile now cannot inter clockworkmod.But it can recognized
via fastboot through computer cmd commands like these:
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash boot boot.img
etc
Is there any way to flash firmware or rom to my huawei u8180 like that?
thank you for your effort
Click to expand...
Click to collapse
A clockworkmod backup creates a number of files:
.android secure.img
boot.img
cache.img
data.img
datadata.img (i dont get this one, but aight. i'll bite.)
nandroid.md5
recovery.img (i'm guessing this is a backup of the mobile's recovery partition. same as the one you flashed in fastboot except, used, so to speak.)
sd-ext.img
system.img
So the file I meant was the recovery.img.
As far as adb flashing goes, it is possible. i found a guide how to do it. but you need Amon_RA recovery for it.
Try pushing the img via adb like you did with CWM and see what happens. If it works, then you're set. If no, I'm honestly fresh out of ideas, mate.
http://forum.xda-developers.com/showthread.php?t=1352204
I had the same problem
i changed it in warranty get anew one from them
i hope you can solve your problem
Thans
Thank you guys, you help me alot!
solved?
marito.da said:
Thank you guys, you help me alot!
Click to expand...
Click to collapse
hi, mmm I have the same problem... Did you solve the problem?
My huawei u8180 is dead does not want to turn on, nothing appears on the screen. How to repair boot?
fidanco said:
My huawei u8180 is dead does not want to turn on, nothing appears on the screen. How to repair boot?
Click to expand...
Click to collapse
When power button pressed nothing on the screen ?
mrcham said:
When power button pressed nothing on the screen ?
Click to expand...
Click to collapse
Im pressed power button and nothing show on the screen only once vibrating. Please help me and sorry for bad English.
fidanco said:
Im pressed power button and nothing show on the screen only once vibrating. Please help me and sorry for bad English.
Click to expand...
Click to collapse
no splash screen [shows your model no or brand or something like that] just black screen ?
---------- Post added at 08:59 PM ---------- Previous post was at 08:35 PM ----------
You can get a help from this (see fastboot)
http://www.addictivetips.com/mobile/how-to-install-a-custom-recovery-to-an-android-phone-device/
mrcham said:
no splash screen [shows your model no or brand or something like that] just black screen ?
---------- Post added at 08:59 PM ---------- Previous post was at 08:35 PM ----------
You can get a help from this (see fastboot)
http://www.addictivetips.com/mobile/how-to-install-a-custom-recovery-to-an-android-phone-device/
Click to expand...
Click to collapse
Display does not appear anything objective is in black.
Аnd does not want to log in fastboot rehearsing with volume down and power button nothing. (sry for bad English)
this tut http://www.addictivetips.com/mobile/how-to-install-a-custom-recovery-to-an-android-phone-device/ did not help me.
Hi there,
I'm pretty new to zip flashing, but after the installation I regretted and wanted it removed. Before that I had made an entire backup, which I then restored and since then my phone has not been able to boot.
I've tried to boot into recovery mode but without any luck. It's stuck on the OnePlus logo.
I can get it in Fastboot though but that's about it and the normal power on results in bootloop.
I've been reading many topics about this but in all cases it's crucial that you've enabled USB Debugging which is quite the task since I'm not able to boot it up.
Hope you guys can help me since I don't have any spare phone at the moment.
P.S. I'm on OP X with OxygenOS.
EDIT: Solved
MattBooze said:
Hi there,
I'm pretty new to zip flashing, but after the installation I regretted and wanted it removed. Before that I had made an entire backup, which I then restored and since then my phone has not been able to boot.
I've tried to boot into recovery mode but without any luck. It's stuck on the OnePlus logo.
I can get it in Fastboot though but that's about it and the normal power on results in bootloop.
I've been reading many topics about this but in all cases it's crucial that you've enabled USB Debugging which is quite the task since I'm not able to boot it up.
Hope you guys can help me since I don't have any spare phone at the moment.
P.S. I'm on OP X with OxygenOS.
EDIT: Solved
Click to expand...
Click to collapse
Hi there, can u help me solve this problem..i have the same problem as yours..Now i dont know what to do..i have tried the mega unbrick but no luck at all still the same issues stuck at the boot logo and reboot itself..i need your help fast..contact me at [email protected] Email me there..please
Basically this is how it goes: You have to have an unlocked bootloader or else it will more than likely not boot into a tampered system. Unlocking the bootloader is simple on this phone and does not void the warranty, but to do so you have to have enabled "OEM unlock" in the developer settings which from the sounds of it you didn't. I'm going to cut and paste some of my response I've sent to other people here:
The first thing you're going to need to do is to flash the stock Recovery from OnePlus. Ypu will flash it the same way you flashed TWRP (if you did) with Fastboot. If you haven't done that and need me to explain it I will, I'll be here all day. Download the recovery here: https://s3.amazonaws.com/oxygenos.oneplus.net/OPX_recovery.img
Next, the recovery will normally only flash the stock ROM as provided by OnePlus. You can download that file from here: http://downloads.oneplus.net/2016-04-02/opx/OnePlus_X_OxygenOS_2.2.1/ . Flash that with the stock recovery and then do a Factory Data Reset. You will not lose pictures, music, whatever. You won't lose the backup you made either. We just need it to boot into OOS so you can turn on the unlock option.
Reboot the phone. It might take a while. Once you're into the device everything should be working as normal. Go to Settings -> About Phone. Scroll down and tap the "Build Number" until it says you've enabled Developer settings. Go to Settings -> Developer and turn on OEM Unlock. Now you can boot back into Fastboot, and from your computer use the command "fastboot oem unlock" as simple as that and it will unlock the bootloader. Now if you'd like you can safely reflash the TWRP recovery and you should be able to restore your backup.
---------- Post added at 04:08 PM ---------- Previous post was at 04:07 PM ----------
husandroid said:
Hi there, can u help me solve this problem..i have the same problem as yours..Now i dont know what to do..i have tried the mega unbrick but no luck at all still the same issues stuck at the boot logo and reboot itself..i need your help fast..contact me at [email protected] Email me there..please
Click to expand...
Click to collapse
I'm not using email but you can read my reply above if you're having the same problem.
I get;
FAILED (remote: dtb not found) when I try to boot, any suggestions?
o.maille said:
I get;
FAILED (remote: dtb not found) when I try to boot, any suggestions?
Click to expand...
Click to collapse
Just reboot manually dude.
o.maille said:
I get;
FAILED (remote: dtb not found) when I try to boot, any suggestions?
Click to expand...
Click to collapse
Which version of oos u were in? If u were in oos 3.1.x u should flash marshmellow stock recovery... Thn u ll nvr never get dtb not found issue
Im having the same issue, but when i try to flash the recovery, it just says "cannot load (filename)". How do i fix this?
Edit: Fixed!
when you update to 3.1.0 twrp recovery is not compactible with the new recovery partition so you need to flash opxstock 3.1.0 recovery so that you will be able to flash android lollipop version of the opx and reroot and install twrp.
the proccess is really simple
1)go to settings about phone and enable developer options by tapping build number 10 times.
2)enable adb and oem unlocking
3)go to the folder you have adb and fastboot installed
4)Place the downloaded recovery file there(the one FROM THIS THREAD!)
5)type 'adb reboot bootloader'
Phone will reboot to bootloader
6)type 'fastboot flash recovery recovery.img'(or the name you gave for the recovery with '.img' at the end)
7)type 'fastboot boot recovery.img'
8)flash update.zip (the 2.1.1 version)If you cannot find the link to the file comment bellow
9)flash the update.zip via stock recovery.
10)your phone is back to stock now and you are able to flash twrp recovery and root your phone now.
Please hit thanks if i helped
EDIT:Unzip the recovery file fist
Post this in General Section
Sorry I can't find the link to update.zip
Please post the update.zip file
adb doesn't recognize my phone anymore, now that I want to try it again with the file from this forum. And it seems to be stuck in fastboot mode.
What should I do?
---------- Post added at 07:31 PM ---------- Previous post was at 07:23 PM ----------
brii_22 said:
adb doesn't recognize my phone anymore, now that I want to try it again with the file from this forum. And it seems to be stuck in fastboot mode.
What should I do?
Click to expand...
Click to collapse
Okay I found it.
Type in adb 'fastboot devices'
it wil recognise your phone
Then 'fastboot reboot'
And my phone works again, and I guess I can just restart the proces now
(replied to myself in case someone else has this problem )
GerasxD said:
when you update to 3.1.0 twrp recovery is not compactible with the new recovery partition so you need to flash opxstock 3.1.0 recovery so that you will be able to flash android lollipop version of the opx and reroot and install twrp.
the proccess is really simple
1)go to settings about phone and enable developer options by tapping build number 10 times.
2)enable adb and oem unlocking
3)go to the folder you have adb and fastboot installed
4)Place the downloaded recovery file there(the one FROM THIS THREAD!)
5)type 'adb reboot bootloader'
Phone will reboot to bootloader
6)type 'fastboot flash recovery recovery.img'(or the name you gave for the recovery with '.img' at the end)
7)type 'fastboot boot recovery.img'
8)flash update.zip (the 2.1.1 version)If you cannot find the link to the file comment bellow
9)flash the update.zip via stock recovery.
10)your phone is back to stock now and you are able to flash twrp recovery and root your phone now.
Please hit thanks if i helped
EDIT:Unzip the recovery file fist
Click to expand...
Click to collapse
many have ask and cannot find the update.zip 2.1.1, where are you?
Hi, It's not working for me.
I still get the same error message: `FAILED (remote: dtb not found)` when I try to boot into recovery.
I would really appreciate some help here
Thanks anyway. I'll keep searching.
---------- Post added at 04:46 AM ---------- Previous post was at 03:51 AM ----------
guiohm said:
Hi, It's not working for me.
I still get the same error message: `FAILED (remote: dtb not found)` when I try to boot into recovery.
I would really appreciate some help here
Thanks anyway. I'll keep searching.
Click to expand...
Click to collapse
Ok, I solved my problem. I had to revert to an older TWRP. I just didn't know that the new updated TWRP is not backward compatible (that's bad) and I couldn't find an older one until I stumbled upon this thread: http://forum.xda-developers.com/showpost.php?p=69170103&postcount=45
guiohm : Thank you SO MUCH ! I searched this solution for hours. I can't tell you how grateful I am.
THANK YOU!
brii_22 said:
adb doesn't recognize my phone anymore, now that I want to try it again with the file from this forum. And it seems to be stuck in fastboot mode.
What should I do?
---------- Post added at 07:31 PM ---------- Previous post was at 07:23 PM ----------
Okay I found it.
Type in adb 'fastboot devices'
it wil recognise your phone
Then 'fastboot reboot'
And my phone works again, and I guess I can just restart the proces now
(replied to myself in case someone else has this problem )
Click to expand...
Click to collapse
Thank you so much! I had the same problem and had no idea what to do.
FingolfinTheEldar said:
Sorry I can't find the link to update.zip
Click to expand...
Click to collapse
You can find it in the One Plus Website for the one plus x. it the rom
Official one okay?
Is it also ok, to take the official twrp 3.1.1-1-onyx from the twrp website?
Thanks
OPforlife said:
Is it also ok, to take the official twrp 3.1.1-1-onyx from the twrp website?
Thanks
Click to expand...
Click to collapse
Not at all. The point is to flash an old offcieal recovery, then OOS 3 to update bootloader.
If you already are on the new bootloader no need to do that.
if you're not, BLupdater.
If already try to flash something not compatible, you may haave to run the Mega unbrick Guide.
Same isse with E1001
I had the same issue "remote: dtb not found" when trying to use recent (3+) versions of TWRP on my E1001 One Plus X. I ended up discovering that only an old version of TWRP (2.8.7) would boot on the device. Here is the version I used successfully on One Plus X E1001 (white): twrp-2.8.7.0-6.0-onyx.img. I cannot post a link to it as the forum is preventing new users to publish external links but I have it if needed.
I literally ****ed up. No OS, No Recovery. My only hope is flashing from fastboot with my extracted images from update.app.
I just wanted to root my phone. I completely followed the step in this thread https://forum.xda-developers.com/android/general/rooting-huawei-y6-ii-cam-l21-t3501162 aside from just flashing TWRP 3.1.0.0 because TWRP 3.0.2.0 wont work for me. Well it was working for me and when I tried to flash the SuperSU.zip it says "unable to mount /data" so i'd do my research and to fix that i need to change file system to fat and format, then changed it back to ext4 and format. It fixed the issue but i was not aware that it will wipe my os. So I have no backup for ready. I'm down to no os but i have twrp. I wanted to make my own flashable zip rom that i extracted from update.app. The flashable zip that I worked does not working. The META-INF,system.img,boot.img then archived to zip file then flash it. I'm so ****ed up i tried to directly flash the images in TWRP. Flashed the boot.img to boot partition, and flash recovery.img to recovery partition. And when i tried to flash the system.img in oeminfo,boot, and recovery partition. The file size is big and it does not work that way. So in short i flashed the stock recovery.img over my TWRP. And that's ****ed up. My only hope is flashing the images via fastboot but my fastboot cant detect my device. I'm stuck at 2 boots only. The Huawei eRecovery ( i tried to download latest version and recovery via wifi but the package wont download) and Rescue Mode. Thankk youu in advance for helping me. I would appreciate it so lot! Help me
Fastboot flash system system.img
---------- Post added at 08:30 PM ---------- Previous post was at 08:28 PM ----------
Amaan007 said:
Fastboot flash system system.img
Click to expand...
Click to collapse
Do u have huawei y6 II
Amaan007 said:
Fastboot flash system system.img
---------- Post added at 08:30 PM ---------- Previous post was at 08:28 PM ----------
Do u have huawei y6 II
Click to expand...
Click to collapse
I am using Huawei Y6 II (CAM-L21). Thank you for reply But yes I am trying to use adb and fastboot command but my computer can't recognize it. I mean when I plugged it in my computer it does not show anything and when I'm trying to enter the command (adb devices) It only shows
"* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached"
I think it might have to do something in the twrp recovery. When my twrp recovery is working it shows my device and my laptop can recognize it. When I accidentally wipe my recovery it does not show anymore. One thing I found out that It recognize my device when I'm looking into device manager. It shows in Portable Device and something F:/
Thaank youu for noticing me
Valkenburgh Margin said:
I am using Huawei Y6 II (CAM-L21). Thank you for reply But yes I am trying to use adb and fastboot command but my computer can't recognize it. I mean when I plugged it in my computer it does not show anything and when I'm trying to enter the command (adb devices) It only shows
"* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached"
I think it might have to do something in the twrp recovery. When my twrp recovery is working it shows my device and my laptop can recognize it. When I accidentally wipe my recovery it does not show anymore. One thing I found out that It recognize my device when I'm looking into device manager. It shows in Portable Device and something F:/
Thaank youu for noticing me
Click to expand...
Click to collapse
Go to fastboot and type fasboot devices and tell me the outcome
---------- Post added at 06:34 AM ---------- Previous post was at 06:29 AM ----------
Amaan007 said:
Go to fastboot and type fasboot devices and tell me the outcome
Click to expand...
Click to collapse
https://forum.xda-developers.com/ho...m-unofficial-lineageos-14-1-honor-4c-t3591305
Flash this with sdcard its compatible with ur phone or move the zip file with USB or put in ur sdcard and flash it with twrp hit thanks if it helped
Amaan007 said:
Go to fastboot and type fasboot devices and tell me the outcome
---------- Post added at 06:34 AM ---------- Previous post was at 06:29 AM ----------
https://forum.xda-developers.com/ho...m-unofficial-lineageos-14-1-honor-4c-t3591305
Flash this with sdcard its compatible with ur phone or move the zip file with USB or put in ur sdcard and flash it with twrp hit thanks if it helped
Click to expand...
Click to collapse
In fastboot it does not show in listed device.
I would love to flash that rom but I have no custom recovery like twrp Is it possible to flash it with update package?
Valkenburgh Margin said:
In fastboot it does not show in listed device.
I would love to flash that rom but I have no custom recovery like twrp Is it possible to flash it with update package?
Click to expand...
Click to collapse
https://www.facebook.com/amaandip.singh
talk to me on fb
https://drive.google.com/open?id=0B0MKgCbUM0itNVB1elljU2NPR0k
here is a updater for fastboot
Just asking what tool are u using
Amaan007 said:
https://www.facebook.com/amaandip.singh
talk to me on fb
https://drive.google.com/open?id=0B0MKgCbUM0itNVB1elljU2NPR0k
here is a updater for fastboot
Just asking what tool are u using
Click to expand...
Click to collapse
THAAANKSS TO THIS MAN! He completely taught me things and assisted me. Cheers for you man! How to close this thread? My
Huawei Y6II is completely fixed and rooted! Thanks xda
@matt4321 plz close this thread
Thread closed
The phone has unlockable bootloader and I only have low mobile data and was wondering if there's a way to rip the stock recovery to port twrp over.
When I get wifi tomorrow, I'll try using PC king root while the phone is in fastboot mode.
Kingoroot will get to 100 but fail, kingroot pc version would just give me Chinese letters and do nothing.
Can anyone list anyother root exploits I might I can try on this phone? I tried the Android version of kingroot , but that just gives me the request device and I can't bypass it.
Root u673c
... has anyone been able to root the U673C version 6.0.1, if so, guide me through it, thanks!
we need to somehow extract the stock recovery.img to port twrp over.
Rooted boot image for u673c
I have finally rooted this phone. Here is the rooted boot.img uploaded to MediaFire.
https://www.mediafire.com/download/r6hs4x6mju18j01
Its rooted with Magisk 17.1
Unlock bootloader rename file to boot.img and flash with fastboot.
tdawgg777 said:
I have finally rooted this phone. Here is the rooted boot.img uploaded to MediaFire.
https://www.mediafire.com/download/r6hs4x6mju18j01
Its rooted with Magisk 17.1
Unlock bootloader rename file to boot.img and flash with fastboot.
Click to expand...
Click to collapse
Awesome! SO is it possible to get more detailed instructions. It's been a few years since i've dont this stuff. My old brain's memory isn't so good.
DB225 said:
Awesome! SO is it possible to get more detailed instructions. It's been a few years since i've dont this stuff. My old brain's memory isn't so good.
Click to expand...
Click to collapse
Some instructions would be nice, Does not work I can get boot.img to install but it will only boot into stock recovery
In developer options click allow OEM unlocking then boot to fastboot mode and use fastboot to unlock bootloader and flash the rooted kernel.
Rename file to boot.img
Unlock bootloader: fastboot oem unlock
Flash kernel: fastboot flash boot boot.img
twrp is not included...
---------- Post added at 09:41 AM ---------- Previous post was at 09:35 AM ----------
Here is the twrp that I used and so far seems to work fine.
https://forum.xda-developers.com/showpost.php?p=78089109&postcount=283
Thank Rortiz2 for building it.
---------- Post added at 09:49 AM ---------- Previous post was at 09:41 AM ----------
If you are having trouble booting system after installing twrp try wiping data and cache.
The no verity zip should not be needed since kernel was patched with magisk... but if still Having issues booting system try flashing the no verity zip... you can search for it here on xda
Thank you !
I just wanted to thank you, I am disabled and dont have alot of income, This phone is my lefeline, I now have it rooted running Magisk 18.0 and TWRP is installed and seems to be working fine, However I would like to ask this. There is an pain in the ass app that seems to be part of the last firmware update this phone had, ( io.appservice.module ) ( Found in data/appi.service.module-1/base.apk
This Kunt sorry for the language, If you uninstall it it is back with every reboot ?
I can disable it to solve the problem but I would like it gone, Any thoughts ?
does anyone have twrp backup or copy firmware.I wipe internel by accident cant flash u673c no os,thanks sean
---------- Post added at 04:40 AM ---------- Previous post was at 04:32 AM ----------
does anyone have backup or copy firmware u673c cause screwed up wiped internel memory,sean
derwoodbones said:
I just wanted to thank you, I am disabled and dont have alot of income, This phone is my lefeline, I now have it rooted running Magisk 18.0 and TWRP is installed and seems to be working fine, However I would like to ask this. There is an pain in the ass app that seems to be part of the last firmware update this phone had, ( io.appservice.module ) ( Found in data/appi.service.module-1/base.apk
This Kunt sorry for the language, If you uninstall it it is back with every reboot ?
I can disable it to solve the problem but I would like it gone, Any thoughts ?
Click to expand...
Click to collapse
I would just disable the app... just in case there is an update for the phone in future... if you remove the app the update will fail but if its disabled you can just enable it take update and then disable it again... also disable the stock gallery and install a third party one from the playstore... the stock gallery app will through all sorts of ads at you full screen ads as well.
I used titainium backup to disable all apps I didn't want... bit you can use what ever app you want. You can disable most apps in the apps info but not all apps.
I just use the phone as a backup and don't know where it is right now but when I come accross it I'll post all the apps I disabled here.
I healthfully thank you
---------- Post added at 04:00 AM ---------- Previous post was at 03:59 AM ----------
I fully thank you
Thanks for the info!
In your post, you wrote, "then boot to fastboot mode".
Kindly explain how that is done on this phone. After spending hours, I can't figure it out.
Thanks again!
tdawgg777 said:
In developer options click allow OEM unlocking then boot to fastboot mode and use fastboot to unlock bootloader and flash the rooted kernel.
Rename file to boot.img
Unlock bootloader: fastboot oem unlock
Flash kernel: fastboot flash boot boot.img
twrp is not included...
---------- Post added at 09:41 AM ---------- Previous post was at 09:35 AM ----------
Here is the twrp that I used and so far seems to work fine.
https://forum.xda-developers.com/showpost.php?p=78089109&postcount=283
Thank Rortiz2 for building it.
---------- Post added at 09:49 AM ---------- Previous post was at 09:41 AM ----------
If you are having trouble booting system after installing twrp try wiping data and cache.
The no verity zip should not be needed since kernel was patched with magisk... but if still Having issues booting system try flashing the no verity zip... you can search for it here on xda
Click to expand...
Click to collapse
smuskat said:
Thanks for the info!
In your post, you wrote, "then boot to fastboot mode".
Kindly explain how that is done on this phone. After spending hours, I can't figure it out.
Thanks again!
Click to expand...
Click to collapse
I'm sorry I can remember the button combo... From phone off press and hold vol down and power release power and keep holding vol down... I think fast boot mode is an all black screen or it just has umx logo, can't remember exactly... when you have a fast hooky cmd window open type fastboot devices to see if your phone is connected... if it is not try holding vol up instead of vol down when turning phone on... if vol up don't work try holding both vol buttons. Before this can be done make sure usb debugging is enabled in developer options and authorize your pc when prompted... alternately after you have adb authorized you could use adb cmd "adb reboot bootloader"
If you ned help with adb/fastboot do a quick google search you will find plenty of info and instructions
I appreciate your reply.
But I need some more assistance, please:
I've rooted many devices, flashed custom ROM's, Custom recoveries, etc, but I'm completely stuck now with this phone.
I tried "Power and Vol Down"....nothing.
I tried "Power and Vol Up"...and for a split second I see the Android robot on its back...but after that split second, I'm in the stock recovery menu.
One of the stock recovery menu choices is to reboot into Bootloader. When I try that, the phone reboots; but to the best of my knowledge, does not get into Bootloader mode.
I have installed ADB on my PC. When I type "ADB devices", I see my phone listed. But when I type "adb reboot bootloader", it reboots, but not into Bootloader.
I have USB debugging enabled, I have authorized my PC, and in Developer options, I have enabled the "Unlock Bootloader" option.
My Googling results have not yielded useful info.
I'm stuck.....
I hope that someone with experience with this particular device can please tell me what I'm doing wrong.
Thank you!
tdawgg777 said:
I'm sorry I can remember the button combo... From phone off press and hold vol down and power release power and keep holding vol down... I think fast boot mode is an all black screen or it just has umx logo, can't remember exactly... when you have a fast hooky cmd window open type fastboot devices to see if your phone is connected... if it is not try holding vol up instead of vol down when turning phone on... if vol up don't work try holding both vol buttons. Before this can be done make sure usb debugging is enabled in developer options and authorize your pc when prompted... alternately after you have adb authorized you could use adb cmd "adb reboot bootloader"
If you ned help with adb/fastboot do a quick google search you will find plenty of info and instructions
Click to expand...
Click to collapse
hope it helps
for me command "Fastboot Continue" would make it continue to load, it did take a while....
if it continues the loop then something went wrong. as i got the infinite bootscreen 1st try.
i just reinstalled the boot image a 2nd time and it worked here's the CRC-32 Hash "a483081b"
Not sure what you mean. You wrote " command "Fastboot Continue" would make it continue to load" Do you mean from the PC command prompt? Do you mean from the phone's recovery menu?
You also wrote " i got the infinite bootscreen 1st try"
I don't know what you mean by "infinite bootscreen"......
Sorry I'm having trouble....ty!
Liberator Elite said:
for me command "Fastboot Continue" would make it continue to load, it did take a while....
if it continues the loop then something went wrong. as i got the infinite bootscreen 1st try.
i just reinstalled the boot image a 2nd time and it worked here's the CRC-32 Hash "a483081b"
Click to expand...
Click to collapse
More Info
smuskat said:
Not sure what you mean. You wrote " command "Fastboot Continue" would make it continue to load" Do you mean from the PC command prompt? Do you mean from the phone's recovery menu?
You also wrote " i got the infinite bootscreen 1st try"
I don't know what you mean by "infinite bootscreen"......
Sorry I'm having trouble....ty!
Click to expand...
Click to collapse
Sent ya PM
Smuskat
Hope That Helps.
I Got Magisk, Xposed & Even A Custom Bootscreen With Sound on Mine.
Okay. Got it all done, mostly thanks to Liberator Elite. And just so that no one else should ever be as stuck as I was, please allow me to clarify what actually worked:
I kept on attempting to put the phone into Fastboot mode or Bootloader mode. I could enter the stock recovery, choose to boot into Bootloader, but it wasn't working--or so I thought. All I would see upon reboot was a screen that was black, with the words "UMX" (Ultimate Mobile Xperience??? or whatever...)
However, Liberator Elite called to my attention that that screen WAS THE BOOTLOADER screen. I typed "Fastboot Devices" from the command prompt, and there was my phone! I then was able to flash over the boot.img file, and the TWRP posted here, and from TWRP, I was able to install Magisk.
For some of you, this is all simple--thanks for not laughing.
And to the entire community, thanks for being such a great resource! All done--thanks to you guys. Much appreciated!!!