Anybody can PLEASE share, need it or my phone is destroyed coz i accidentally destroyed my backup
EDIT:
FOUND OUT A SOLUTION
- FLASHED boot.img FROM B130 FIRMWARE
- STILL BOOTLOOPED
- FLASHED MAGISK 13.3 WHICH MODIFIES THE BOOT.IMG
- BOOT LOOP AGAIN
-AFTER 4 BOOTLOOPS HUAWAI RESCUE DOING FACTORY RESET
>>>Sucesful boot into ANDROID
-----------------------------
NOW ONLY STUCK BY ENTERING PIN ----> DOESN'T ACCEPT MY PIN
Hello, i've got a similar problem. after trying to flash emui 5.1 supersu.zip the phone bootlooped. after restroring with twrp backup the phone crashed after the "emui-registration/welcome" dialog. tried to flash b130 via twrp and dload method. do you have any ideas? maybe by flashing boot.img? and where can i find the b130 boot.img? Thx!
4r44444 said:
Anybody can PLEASE share, need it or my phone is destroyed coz i accidentally destroyed my backup
EDIT:
FOUND OUT A SOLUTION
- FLASHED boot.img FROM B130 FIRMWARE
- STILL BOOTLOOPED
- FLASHED MAGISK 13.3 WHICH MODIFIES THE BOOT.IMG
- BOOT LOOP AGAIN
-AFTER 4 BOOTLOOPS HUAWAI RESCUE DOING FACTORY RESET
>>>Sucesful boot into ANDROID
-----------------------------
NOW ONLY STUCK BY ENTERING PIN ----> DOESN'T ACCEPT MY PIN
Click to expand...
Click to collapse
I extracted it with Huawei Update Extractor from UPDATE.APP provided in this thread "https://forum.xda-developers.com/honor-9/how-to/firmware-honor-9-stf-l09c432-b130-2017-t3649673" (you must extract update.app from firmware and than use huawei update extractor windows app to extract the extracted UPDATE.APP - I only extracted the boot image... phone booted succesful, had to do another hard reset via TWRP coz it didn't accept my (right!) PIN... now works... only fingerprint scanner and navbar buttons does not work... now I only need the BOOT.IMG from my old firmware (B100) and flash via bootloader... I think this will fix the problem....
I do not guarantee this things to work maybe crushing your device even more do it only if you risky
Related
Trying to update my device (GR5 KII L33) I downloaded an update.zip file, and added it to the dload folder, but this file did not correspond to my phone, so now it does not turn on and only directs me to the TWRP. I have not found the original software KII L33 and I can not get my phone to turn on, although I have repeatedly installed my backup the phone just go to the TWRP
Please, I would be very grateful if you could help me restore my phone, or share the original file so I can install it, since so far I have not found a solution
If you're wanting to flash stock then there's a guide here.
If you're wanting a custom rom then in TWRP just do a full wipe (factory reset + system) and flash the ROM zip file just like normal.
Don't flash official ROM update zips in TWRP.
Donot flash official emui updates from twrp, as it contains update.app files
Hi guys,
yesterday I succesfully unlocked bootloader on my Mate 10 PRO (Bla-L09) and installed LineageOS 15.1 with success.
The problem is that now I just want to recover my stock firmware on it.
I downloaded the update.zip from the site (for my branded phone) and it was C55 version but I don't know how to repair it. Just tried to reflash stock recovery and start recovery mode but with no success. Installation hang on 5% and then phone reboots automatically.
Already tried to flash SYSTEM.img (from Huawei Update Extractor) with fastboot: it flashes correctly but im impossible to boot the devices.
I am sure that I do something wrong. Can you help me please?
Hi,
Where have you found original stock rom. It is my impression that it is not available. Could you please provide a link?
Thanks
outlier91 said:
Hi guys,
yesterday I succesfully unlocked bootloader on my Mate 10 PRO (Bla-L09) and installed LineageOS 15.1 with success.
The problem is that now I just want to recover my stock firmware on it.
I downloaded the update.zip from the site (for my branded phone) and it was C55 version but I don't know how to repair it. Just tried to reflash stock recovery and start recovery mode but with no success. Installation hang on 5% and then phone reboots automatically.
Already tried to flash SYSTEM.img (from Huawei Update Extractor) with fastboot: it flashes correctly but im impossible to boot the devices.
I am sure that I do something wrong. Can you help me please?
Click to expand...
Click to collapse
After flashing back stock system.img you need to Factory Reset in stock recovery. Alternatively use HWOTA: https://forum.xda-developers.com/mate-10/how-to/guide-mate-10-flash-oreo-update-package-t3716814
Always make a Twrp backup of your rom so you don't have to worry about flashing back like this.Thats what I do and I have never had a issue.
Hi team. Forgivevme if this has been posted in the wrong place
Need assistance. Have a Huawei p8 lite 2017. rooted it 8 months ago, with custom recovery.
Recently installed apps2d and may i stuffed some link/mount. Since then, camera wont run, gallery wont open, google apps freeze. Tried factory reset and flashing stock but get this error. Error installing zip package. Also md5 not found.
Firmware is PRA-LX2C185B160. Should i unroot and flash with stock recovery or could somebody provide me with working firmware if this is the problem
Update: tried to reflash stock boot img to do update.app. phone know gets stuck in Emui erecovery.
Fastboot acknowledges device but commands fail. Download mode shows Bootloader unlocked, Frp locked.
Any advise on how to unbrick. I have tried the force flash update.app via micro sd, no luck. Tried using huawei extractor to extract update.app. and flash fastboot boot, recovery img etc. No luck.
Please assist.
Hi . I really need assistance. The update.app doesnt have cust.img file. I think this is where the problem lies. I have downloaded 10 times. Still no cust.img
Mods. Please delete or close.
I've installed aosp with gsi but now i can't flash stock system.img with fastboot because i've got bootloop.
I followed all types of guide.
I've downloaded full ota and with the 3 files, update, update lx1 and another file, i've extracted system.img, recovery_ramdis.img and cust.img from update.app and flashed all files but the phone stuck in bootloop.
Can you help me? Because i don t like aosp and i can t install gapps
I usedHurUpater to flash a new stock ROM on my rooted and unlocked P20 lite. You can use the Firmware Finder for Huawei app in the playstore tot download the most recent stock firmware.
Good luck.
You don't have to flash cust.img
To restore your phone simply boot in bootloader, even with boot loop you can do it with the right timing.
Then flash system and recovery and do a full wipe.
Desperate help needed to go back to stock (Mate 10 Pro EMUI 8 TWRP & MAGISK) BLA-L09
Hello there. I'm used to Samsung devices and the more I read about Huawei devices the more lost I feel about them.
So, my Mate 10 pro BLA-L09 is currently running Build Number 8.0.0.131(C782). It is rooted with Pretoriano's TWRP and Magisk (Using the All-In-One tool). Of course, I can't get any pending update installed. I would like to receive that EMUI 9 update. I've read people have been successful using HuRupdater and some others ended up with a hard bricked device. Some other people suggest the safest option is to uninstall Magisk, flash stock recovery and let the phone update itself.
So far, I've downloaded the same full 8.0.0.131(C782) firmware I'm on from Firmware Finder and downloaded Huawei Update extractor to extract the recovery from UPDATE.APP. However, instead of having one recovery file to extract, there are 3 Recoveries (named: RECOVERY_RAMDIS, RECOVERY_VBMETA, RECOVERY_VENDOR) and another 4 E-Recoveries.
Can anyone please give me some step by step guidance on what to do? I'll Paypal you a beer if I'm successful with the help.
Cheers!
May be you can simply dload the firmware and then it should be full stock if dload works. Dload guide is given in my signature
shashank1320 said:
May be you can simply dload the firmware and then it should be full stock if dload works. Dload guide is given in my signature
Click to expand...
Click to collapse
Thanks! But I think dload won't work with custom recovery, right? I'm on TWRP. And getting stock recovery is just what I'm trying to achieve.
93starletgt said:
Thanks! But I think dload won't work with custom recovery, right? I'm on TWRP. And getting stock recovery is just what I'm trying to achieve.
Click to expand...
Click to collapse
Dload replaces your twrp and custom boot both. It will bring back your phone to full stock. Else you could extract the images from your firmware and then flash. Let me give you the commands.
Thanks! I just fixed my issue by flashing this through TWRP: it Installs the Oreo stock recovery.
The procedure was:
-Booted into TWRP
-Uninstalled Magisk (by flashing Magisk Uninstall Zip)
-Flashed the stock recovery (from the link below) through TWRP
-Reboot
-Check for system updates, phone will install them with no problems
Phone will be unrooted and will have stock recovery. Don't know if this will work for every stock build, it worked with mine 8.0.0.131(C782).
Link:
https://mega.nz/#!8Swx3QaC!3JQ9imU70E9O1BxgO53Z754lGCZxCbKGgSHqvTEcXsQ
I was getting the command ready for you. Glad you fixed it yourself
[*]Run the command to boot to fastboot
Code:
adb reboot bootloader
[*]On fastboot screen, you will have bootloader state as Unlocked and FRP Unlocked.
[*]Flash the stock Recovery Ramdisk as
Code:
fastboot flash recovery_ramdisk <Recovery_File_Name>.img
[*]If you have installed magisk, flash the stock boot ramdisk.img as
Code:
fastboot flash ramdisk <ramdisk_File_Name>