Hello,
I used full data wipe on my Honor 9 to remove decryption... now after restart the phone I'm in bootloop (Unlocked Bootloader message shows up --->Huawei Animation shows up--> Phone restarting and boots to Huawei Recovery)...
To fix it I already tried to flash the SYSTEM.IMG from B130 Firmware (https://forum.xda-developers.com/honor-9/how-to/firmware-honor-9-stf-l09c432-b130-2017-t3649673) (Before I had B100 Firmware on my Phone)
....
Also tried multiple times to Factory Reset in TWRP, wipe manually Cache/Data/Dalvik
Didn't help... still exact same problem...
I can:
- Access TWRP
- Access Fastboot mode
- Access Stock Recovery
I would be glad if any (pro) could help me to restore my phone... Would pay you also 10€ via Paypal if it works...
Thank you!---------------------------
FIXED THE PROBLEM SOME MINUTES AFTER OPEN THE THREAD LOL
HOW IT GOT FIXED
--->Wiped also INTERNAL STORAGE
Yes it was that easy lol.
.... Also successful booted the upgraded unconfirmed B130 System Image (Still shows B100 in settings but succesful flashed it in Fastboot...)...
Pleas explain more detailed? I'got the same problem as you described, but no sucsess with wiping or trying to restore with twrp/dload-method with c432b120 or c432b130. If there any other ideas, thx a lot!
tnotb1 said:
Pleas explain more detailed? I'got the same problem as you described, but no sucsess with wiping or trying to restore with twrp/dload-method with c432b120 or c432b130. If there any other ideas, thx a lot!
Click to expand...
Click to collapse
I fixed it by also wipe internal storage.
doesn't functions with wiping varios storages and/or installing with dload with c432b120/b130 on sd card, internal storage and cust. the same with boot image b100 stock rom pre installed. flashing zip files doesn't functions too. both recoveries ends with failure (like 3rd erecovery too). can you made a guide how to recover please?
4r44444 said:
I fixed it by also wipe internal storage.
Click to expand...
Click to collapse
I extracted the SYSTEM.IMG from B130 Firmware with Huawei Extractor and than flashed it via FASTBOOT mode.
no sucess for me.. maybee other problem.
But can you made a guide step by step?
thx!
tnotb1 said:
doesn't functions with wiping varios storages and/or installing with dload with c432b120/b130 on sd card, internal storage and cust. the same with boot image b100 stock rom pre installed. flashing zip files doesn't functions too. both recoveries ends with failure (like 3rd erecovery too). can you made a guide how to recover please?
Click to expand...
Click to collapse
4r44444 said:
I extracted the SYSTEM.IMG from B130 Firmware with Huawei Extractor and than flashed it via FASTBOOT mode.
Click to expand...
Click to collapse
I wiped internal and fastboot flashs system.img from b130 and I'm still stuck on EMUI setup loop, Please go into greater detail
RobertHarkness said:
I wiped internal and fastboot flashs system.img from b130 and I'm still stuck on EMUI setup loop, Please go into greater detail
Click to expand...
Click to collapse
Try.Factory Reset including internal storage in TWRP
..thats how I Made in... Dont forget to restart Recovery after wipe data.
4r44444 said:
Try.Factory Reset including internal storage in TWRP
..thats how I Made in... Dont forget to restart Recovery after wipe data.
Click to expand...
Click to collapse
Done and still same issue, could you upload your twrp backup and I'll try again of that?
Can't atm, I describe again my steps:
- Flashed B130 SYSTEM.IMG via Fastboot
- Flashed B100 BOOT.IMG via Fastboot
-Reboot to TWRP
-Factory Reset
-Wipe Internal Data (Restarted recovery after)
-Wipe Internal Storage
-Restarted
....
That's how it worked for me.
where can i find the b130 system.img or please can you host/link both files?
4r44444 said:
Can't atm, I describe again my steps:
- Flashed B130 SYSTEM.IMG via Fastboot
- Flashed B100 BOOT.IMG via Fastboot
-Reboot to TWRP
-Factory Reset
-Wipe Internal Data (Restarted recovery after)
-Wipe Internal Storage
-Restarted
....
That's how it worked for me.
Click to expand...
Click to collapse
tnotb1 said:
where can i find the b130 system.img or please can you host/link both files?
Click to expand...
Click to collapse
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1637/g104/v90868/f2/full/update.zip
For my bad luck nothing is working for me after having the same problem
I tried to flash stock system. Image and do the required steps with no luck still bootloop
I also tried to flash stock recovery and system and then do a factory reset with stock recovery with no luck again
I tried to to do factory reset and internal storage wipe and still the same problem
Erecovery is not working I guess right now and flashing stock update.app using SD card gives me error again
Flashing custom room did not help also
I almost tried every option with no luck ?
I don't know what to do now
---------- Post added at 11:13 AM ---------- Previous post was at 11:12 AM ----------
Where I can find the B100 boot image ? Maybe this solution could work ?
MiNoOo said:
For my bad luck nothing is working for me after having the same problem
I tried to flash stock system. Image and do the required steps with no luck still bootloop
I also tried to flash stock recovery and system and then do a factory reset with stock recovery with no luck again
I tried to to do factory reset and internal storage wipe and still the same problem
Erecovery is not working I guess right now and flashing stock update.app using SD card gives me error again
Flashing custom room did not help also
I almost tried every option with no luck
I don't know what to do now
Click to expand...
Click to collapse
The good news is LineageOS and other roms dont seem to far from being released if this is true https://forum.xda-developers.com/honor-9/help/info-t3652844
Where I can find the B100 boot image ? Maybe this solution could work ?
RobertHarkness said:
The good news is LineageOS and other roms dont seem to far from being released if this is true https://forum.xda-developers.com/honor-9/help/info-t3652844
Click to expand...
Click to collapse
I hope so as this is my last hope to get it back to life
MiNoOo said:
I hope so as this is my last hope to get it back to life
Click to expand...
Click to collapse
U could try Dc Phoenix to unbrick your phone.
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Sent from my LON-L29 using XDA Labs
Mostar088 said:
U could try Dc Phoenix to unbrick your phone.
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Sent from my LON-L29 using XDA Labs
Click to expand...
Click to collapse
not even this one worked for me
the flashing completed but still the device is not booting
I started to question the Update.app file that I downloaded !!
MiNoOo said:
not even this one worked for me
the flashing completed but still the device is not booting
I started to question the Update.app file that I downloaded !!
Click to expand...
Click to collapse
Then last solution is FunkyHuawei.
https://funkyhuawei.club
Sent from my LON-L29 using XDA Labs
Related
Hello guys, i have a problem, i tried to install RR 5.7.4 via TWRP ZCX, but the first boot asks me for a password
PS: I tried flashing RR while i was in MIUI 8 global stable
Factory reset in TWRP.
using TWRP filemanager go to /data/system
Delete all .key files and also delete locksettings.db file.
Reboot enjoy
Guys, my TWRP ZCX crashed, it is stuck on its logo
theoneofgod said:
Factory reset in TWRP.
Click to expand...
Click to collapse
HI, I am also facing same issue. For every boot I am being asked to draw the pattern. Factory reset in TWRP will not effect my current rom and data stuff ????
[email protected] said:
HI, I am also facing same issue. For every boot I am being asked to draw the pattern. Factory reset in TWRP will not effect my current rom and data stuff ????
Click to expand...
Click to collapse
Yes it will.
Do what's said here https://forum.xda-developers.com/showpost.php?p=70354200&postcount=3
theoneofgod said:
Yes it will.
Do what's said here https://forum.xda-developers.com/showpost.php?p=70354200&postcount=3
Click to expand...
Click to collapse
Thanks for the info
Can you explain what is this feature? because I didn't get this when i am in miui 8. But as soon as I flashed ZCX TWRP and installed RR I started getting this. Thanks in Advance
[email protected] said:
Thanks for the info
Can you explain what is this feature? because I didn't get this when i am in miui 8. But as soon as I flashed ZCX TWRP and installed RR I started getting this. Thanks in Advance
Click to expand...
Click to collapse
What he suggested will delete the lockscreen password/passcode etc so you can boot the phone without any prompts. You do this within TWRP.
theoneofgod said:
What he suggested will delete the lockscreen password/passcode etc so you can boot the phone without any prompts. You do this within TWRP.
Click to expand...
Click to collapse
Many thanks guys..You are quite supportive :angel:
[email protected] said:
Thanks for the info
Can you explain what is this feature? because I didn't get this when i am in miui 8. But as soon as I flashed ZCX TWRP and installed RR I started getting this. Thanks in Advance
Click to expand...
Click to collapse
this is because force encryption of internal storage. do a factory reset in twrp after flashing lazy flasher. and if its stuck on twrp boot logo thn u have to flash latest fastboot dev rom through miflash. thn unlock bootloader thn flash twrp thn flash lazy flasher thn factry reset. .
hope it helps
smustafasms said:
this is because force encryption of internal storage. do a factory reset in twrp after flashing lazy flasher. and if its stuck on twrp boot logo thn u have to flash latest fastboot dev rom through miflash. thn unlock bootloader thn flash twrp thn flash lazy flasher thn factry reset. .
hope it helps
Click to expand...
Click to collapse
oh in that case, should I have to factory reset everytime I flash a rom through my TWRP? I use ZCX TWRP, so Lazy flasher is not required after rom flashing right?
you just need it once . to decrypt your storage
[email protected] said:
oh in that case, should I have to factory reset everytime I flash a rom through my TWRP? I use ZCX TWRP, so Lazy flasher is not required after rom flashing right?
Click to expand...
Click to collapse
In the information about the ZCX TWRP I found below:
ZCX TWRP : http://forum.xda-developers.com/redm...persu-t3462448
- Based on official TWRP 3.0.2-0
- Patches boot.img automatically (Removes dm-verity flag)
- Disables forced encryption
Should I have to tweak anything in TWRP settings to remove this dm-verify flag everytime?
[email protected] said:
In the information about the ZCX TWRP I found below:
ZCX TWRP : http://forum.xda-developers.com/redm...persu-t3462448
- Based on official TWRP 3.0.2-0
- Patches boot.img automatically (Removes dm-verity flag)
- Disables forced encryption
Should I have to tweak anything in TWRP settings to remove this dm-verify flag everytime?
Click to expand...
Click to collapse
no ,but you should flash lazy flasher once . to decrypt ur internal storage. dm-verity flag does nothing to decrypt storage
smustafasms said:
no ,but you should flash lazy flasher once . to decrypt ur internal storage. dm-verity flag does nothing to decrypt storage
Click to expand...
Click to collapse
Thank you very much :angel:
gulshanstrider said:
using TWRP filemanager go to /data/system
Delete all .key files and also delete locksettings.db file.
Reboot enjoy
Click to expand...
Click to collapse
I tried it. Earlier i did not have any issue even if i install custom rom on my Redmi note 3. But today i thought of trying Pure Nexus *Substratum* rom. And on the first boot it asked me to enter password. though i have never kept password for my mobile, i tried all the passwords that i remember, which didnt solve my issue. then saw ur reply and tried it, and still it didnt work for me. Any other way?:crying:
AnilLonely said:
I tried it. Earlier i did not have any issue even if i install custom rom on my Redmi note 3. But today i thought of trying Pure Nexus *Substratum* rom. And on the first boot it asked me to enter password. though i have never kept password for my mobile, i tried all the passwords that i remember, which didnt solve my issue. then saw ur reply and tried it, and still it didnt work for me. Any other way?:crying:
Click to expand...
Click to collapse
Are you coming from MIUI? If so then MIUI encrypts the data partition, hence the new ROM asking for a password.
Before you install the ROM, you must "format data" on wipe in TWRP, this is different from wipe data.
Note that this will delete all your data obviously.
kimxk said:
Are you coming from MIUI? If so then MIUI encrypts the data partition, hence the new ROM asking for a password.
Before you install the ROM, you must "format data" on wipe in TWRP, this is different from wipe data.
Note that this will delete all your data obviously.
Click to expand...
Click to collapse
Yes i am coming from MIUI. I had done that But no use. Tried what ever that has been discussed in the following thread as well, but that also did not work for me.
http://en.miui.com/thread-324522-1-1.html
Posted a thread on MIUI forum as well. Waiting for some sort of help. Earlier i was able to install Custom Rom's without any issue, (though i am coming from MIUI), but now what ever may be the rom that i am trying to flash, the first boot is asking me for password. Unable to understand what is the issue.
AnilLonely said:
Yes i am coming from MIUI. I had done that But no use. Tried what ever that has been discussed in the following thread as well, but that also did not work for me.
http://en.miui.com/thread-324522-1-1.html
Posted a thread on MIUI forum as well. Waiting for some sort of help. Earlier i was able to install Custom Rom's without any issue, (though i am coming from MIUI), but now what ever may be the rom that i am trying to flash, the first boot is asking me for password. Unable to understand what is the issue.
Click to expand...
Click to collapse
Are you sure that you used "format data"?
Wipe data doesn't remove the encryption.
See this page for an image:
http://xiaomitips.com/media/2016/07/Format-Data-TWRP.png
kimxk said:
Are you sure that you used "format data"?
Wipe data doesn't remove the encryption.
See this page for an image:
http://xiaomitips.com/media/2016/07/Format-Data-TWRP.png
Click to expand...
Click to collapse
Perfect. Worked bro. Thanks a lot for the help. I was wiping cache,and internal storage. Now only came to know this. :highfive:
Okay guys ...
I tried to install the only available cm rom for honor 7. First I unlocked bootloader, than I installed right TWRP version and than i flashed rom ... but it just ran into bootloop (it doesn't boot up on and on again, it just stocks) ... I messed around, trying to flash old boot.img and recovery.img (from B170 Firmware) but still no way, to get the device boot up normal. also with original honor 7 image ...
i did a backup before where i backed up 3rd modem, boot, cust and system. ... but it doesn't changes anything when I restore ...
Can anybody give me help, how can I get out of this softbrick?
PS: i miss my nexus 4
edit: ok, i found a b121 firmware, image and recovery ... i will try this, but any suggestions are welcome!
there are so many things that you can do, depending on what you did.
if you did a nandroid backup of the stock rom, through twrp, then I would suggest you to flashback twrp and restore.
if not, you have another way
download the not so latest but a decently new full firmware for your device.. there will be an update.app file.
you need to extract that file.. (use huawei update extractor)
after extracting, find recovery.img
then flash that recovery.img(one you just found inside the update.app) using fastboot
now, pull out your sd card and make a folder called dload
and place the downloaded update.app inside it
insert back to your phone
(assuming that your phone is now turned off,) press and hold all the three buttons at once, until you see the honor logo.. then release,
if everything is done right, now your phone should start updating and reboot you back.
i think, this is far easier than fast booting all the three partitions.. good luck
hey,
thanks for your reply!
thilak devraj said:
there are so many things that you can do, depending on what you did.
if you did a nandroid backup of the stock rom, through twrp, then I would suggest you to flashback twrp and restore.
if not, you have another way
download the not so latest but a decently new full firmware for your device.. there will be an update.app file.
you need to extract that file.. (use huawei update extractor)
after extracting, find recovery.img
then flash that recovery.img(one you just found inside the update.app) using fastboot
now, pull out your sd card and make a folder called dload
and place the downloaded update.app inside it
insert back to your phone
(assuming that your phone is now turned off,) press and hold all the three buttons at once, until you see the honor logo.. then release,
if everything is done right, now your phone should start updating and reboot you back.
i think, this is far easier than fast booting all the three partitions.. good luck
Click to expand...
Click to collapse
I did the backup but restoring didn't change anything. What I've done is exactly what you suggested. I extracted the first official available Firware, but I ended up in a bootloop. But with the B380 (not official available) it worked for me
thanks for your help!
RoMaTiX99 said:
hey,
thanks for your reply!
I did the backup but restoring didn't change anything. What I've done is exactly what you suggested. I extracted the first official available Firware, but I ended up in a bootloop. But with the B380 (not official available) it worked for me
thanks for your help!
Click to expand...
Click to collapse
glad you did it
thilak devraj said:
glad you did it
Click to expand...
Click to collapse
me too
do you may have any idea, why it ened up in this soft brick? can't explain ....
RoMaTiX99 said:
me too
do you may have any idea, why it ened up in this soft brick? can't explain ....
Click to expand...
Click to collapse
may be a faulty download?
thilak devraj said:
may be a faulty download?
Click to expand...
Click to collapse
I downloaded it twice and checked the checksums.
RoMaTiX99 said:
I downloaded it twice and checked the checksums.
Click to expand...
Click to collapse
or may be some rom incompatiblity..
did you wipe everything from advanced too? i alwats wipe everythibg b4 flashing roms... and after flashing rom you should wipe cache and battery stats
no i didn't wiped everything.
i followed exactley his instructions and these say
"Make FACTORY RESET in TWRP!!! NOT wipe data and cache!
YOU HAVE TO MAKE FACTORY RESET"
but it doesn't matter anymore.
thanks to everyone!
RoMaTiX99 said:
no i didn't wiped everything.
i followed exactley his instructions and these say
"Make FACTORY RESET in TWRP!!! NOT wipe data and cache!
YOU HAVE TO MAKE FACTORY RESET"
but it doesn't matter anymore.
thanks to everyone!
Click to expand...
Click to collapse
but, always remember to wipe system, data, cache, dalvik (all partitions except internal and external storage)
Hi,
I was installing the lIneage OS 14.1 Mocha and I came across a strange problem. The TWRP and TWRP img installed well, but when I wiped Cache and system and tried to install the Lineage os 14.1 rom, it failed and I was left with a MiPad without an OS. I guess it failed because I did not partition the system before I installed the Rom.
The tablet is turned off and I am not sure hot to get to the recovery of what to do to install a ROM. Could someone please help me with what to do next
Hold Vol up + power button till you see the Mi screen to get to recovery. Go to http://en.miui.com/download-229.html and download Xiaomi's official stock ROM.
cooldude5500 said:
Hold Vol up + power button till you see the Mi screen to get to recovery. Go to http://en.miui.com/download-229.html and download Xiaomi's official stock ROM.
Click to expand...
Click to collapse
I followed this thread http://en.miui.com/thread-118294-1-1.html to merge system partitions but now i am stuck in mi logo. twrp says no OS and i can not wipe system partition or restore from backup as it says 'E:device block not found, unable to mount /system' . Can i flash xiaomi's stock rom to solve this problem?
oreki9 said:
I followed this thread http://en.miui.com/thread-118294-1-1.html to merge system partitions but now i am stuck in mi logo. twrp says no OS and i can not wipe system partition or restore from backup as it says 'E:device block not found, unable to mount /system' . Can i flash xiaomi's stock rom to solve this problem?
Click to expand...
Click to collapse
I tried to flash stock rom but it failed.
oreki9 said:
I tried to flash stock rom but it failed.
Click to expand...
Click to collapse
Sorry, I've no clue what the issue is. I noticed that the ROM seems to be on the external SD, maybe try putting it on the internal might fix it? Or maybe or can try to flash mocha_repartition_stock, wipe, and then flash the stock ROM?
cooldude5500 said:
Sorry, I've no clue what the issue is. I noticed that the ROM seems to be on the external SD, maybe try putting it on the internal might fix it? Or maybe or can try to flash mocha_repartition_stock, wipe, and then flash the stock ROM?
Click to expand...
Click to collapse
the problem is i am unable to flash any file as it gives 'unable to mount /system' error. The system partition shows 0 size. Should i first repair it?
oreki9 said:
the problem is i am unable to flash any file as it gives 'unable to mount /system' error. The system partition shows 0 size. Should i first repair it?
Click to expand...
Click to collapse
Maybe you can try flashing/re-flashing the partition scripts? Or try flashing http://en.miui.com/thread-328108-1-1.html instead, it's a slightly more up to date version of the ROM.
Why do you "restore" when trying to flash?
Palm Trees said:
Why do you "restore" when trying to flash?
Click to expand...
Click to collapse
i was using my nandroid backup to restore my system but it also failed.
oreki9 said:
i was using my nandroid backup to restore my system but it also failed.
Click to expand...
Click to collapse
Have you tried wiping everything?
Which rom are you trying to flash? (by whom, I mean)
Did you confirm re-partitioning was successful?
Palm Trees said:
Have you tried wiping everything?
Which rom are you trying to flash? (by whom, I mean)
Did you confirm re-partitioning was successful?
Click to expand...
Click to collapse
1. I did wipe cache,dalvik,system and data.
2. I tried to flash the stock rom found on the xiaomi website.
3. How can i confirm if repartitoning was succesfull if i cant boot into system? In twrp system partiton is showing 0 size.
---------- Post added at 06:45 PM ---------- Previous post was at 06:39 PM ----------
Can i flash cwm while in twrp ?
oreki9 said:
1. I did wipe cache,dalvik,system and data.
2. I tried to flash the stock rom found on the xiaomi website.
3. How can i confirm if repartitoning was succesfull if i cant boot into system? In twrp system partiton is showing 0 size.
Click to expand...
Click to collapse
Did you follow my guide? https://forum.xda-developers.com/mi-pad/how-to/guide-flash-twrp-merge-partitions-mi-t3611814
Palm Trees said:
Did you follow my guide? https://forum.xda-developers.com/mi-pad/how-to/guide-flash-twrp-merge-partitions-mi-t3611814
Click to expand...
Click to collapse
Didn't see your guide earlier. Now will try to flash your zip file and then a stock rom. Will it work? Also my system partiton is showing 0 size so unable to flash anything. so how can i flash the stock rom?Should i neglect the error and just reboot and hope it works?
oreki9 said:
Didn't see your guide earlier. Now will try to flash your zip file and then a stock rom. Will it work? Also my system partiton is showing 0 size so unable to flash anything. so how can i flash the stock rom?Should i neglect the error and just reboot and hope it works?
Click to expand...
Click to collapse
Give it a try and see what happens.
Palm Trees said:
Give it a try and see what happens.
Click to expand...
Click to collapse
Thanks it worked. The file i downloaded from the miui forum seems to be the problem. I flashed your zip and it succeeded and then i flashed the stock rom and everything worked. Really thanks. Plus the partitions are now merged Thanks again.
oreki9 said:
Thanks it worked. The file i downloaded from the miui forum seems to be the problem. I flashed your zip and it succeeded and then i flashed the stock rom and everything worked. Really thanks. Plus the partitions are now merged Thanks again.
Click to expand...
Click to collapse
No problem Glad it worked.
Hi,
I'm struck on MI logo. I'm on TWRP 3.1.1-0. I've installed miui_MIPADGlobal_V7.3.1.0.KXFMIDD_0d8dcf2bc3_4.4.zip, AOSPExt ROM, AICP, RR ROM but every time it struck on MI logo. All the ROMs are flashed smoothly without any error. I waited for some 30 min but nothing happened. I tried flashing via MIflashtool using flashboot rom but in MIFlash tool it showed 'error: Mismatching image and device'.
Please guide me.
Avee007 said:
Hi,
I'm struck on MI logo. I'm on TWRP 3.1.1-0. I've installed miui_MIPADGlobal_V7.3.1.0.KXFMIDD_0d8dcf2bc3_4.4.zip, AOSPExt ROM, AICP, RR ROM but every time it struck on MI logo. All the ROMs are flashed smoothly without any error. I waited for some 30 min but nothing happened. I tried flashing via MIflashtool using flashboot rom but in MIFlash tool it showed 'error: Mismatching image and device'.
Please guide me.
Click to expand...
Click to collapse
Did you flash stock miui_MIPADGlobal_V7.3.1.0.KXFMIDD_0d8dcf2bc3_4.4.zip using TWRP 2.8.4?
11. Your Mi Pad now boots into TWRP 2.8.4
12. In TWRP select ‘Wipe’ and choose ‘Cache, Data, System and Dalvik Cache’
13. After wiping, press ‘Install’ and flash the ‘Repartition_MI_Pad_1_2GB_zardMi3.zip’
14. Your Mi Pad boots back into TWRP as no OS is installed
15. Install miui_MIPADGlobal_V7.3.1.0.KXFMIDD_0d8dcf2bc3_4.4.z ip (there will be an error, just ignore it and let it finish). Reboot. Wait 5-10 minutes. The MIUI welcome screen will appear, complete the setup.
16. Install DiskInfo from Play Store to confirm your repartitioning was successful.
Palm Trees said:
Did you flash stock miui_MIPADGlobal_V7.3.1.0.KXFMIDD_0d8dcf2bc3_4.4.zip using TWRP 2.8.4?
11. Your Mi Pad now boots into TWRP 2.8.4
12. In TWRP select ‘Wipe’ and choose ‘Cache, Data, System and Dalvik Cache’
13. After wiping, press ‘Install’ and flash the ‘Repartition_MI_Pad_1_2GB_zardMi3.zip’
14. Your Mi Pad boots back into TWRP as no OS is installed
15. Install miui_MIPADGlobal_V7.3.1.0.KXFMIDD_0d8dcf2bc3_4.4.z ip (there will be an error, just ignore it and let it finish). Reboot. Wait 5-10 minutes. The MIUI welcome screen will appear, complete the setup.
16. Install DiskInfo from Play Store to confirm your repartitioning was successful.
Click to expand...
Click to collapse
Thanks. But the problem remains the same. It again struck on MI logo even after flashing through TWRP 2.8.4.
i too have same problem dont know what to do...i tried flashing through fastboot also even that didnt help..
hi i tryed to convert my redmi note 4x to global when flashing with mi flash tool i did it without clean and after that firmware finish installing but got stuck in bootloop now i flashed twrp and tryed to flash custom rom but again bootloop when i check my storage it shows 9gb now when its actual is 32gb i think i disturbed partitions any solution available?
Are you able to boot into TWRP?? If not flash TWRP first using fastboot.
Once you have access to TWRP boot into it and perform a full wipe (System + Data + Cache + Dalvik + Internal Storage). Perform a format too after wipe to be on the safer side. Now copy a custom ROM or MIUI ROM to your Internal Storage or SD card through a computer. Once copied install your ROM.
If you flashed custom ROM flash Gapps after flashing ROM. Reboot.
If you flashed MIUI, flash lazyflasher after that(or phone will be stuck at MI logo). Reboot.
You can find download links for lazyflasher here on XDA or you can google it too.
ArK96 said:
Are you able to boot into TWRP?? If not flash TWRP first using fastboot.
Once you have access to TWRP boot into it and perform a full wipe (System + Data + Cache + Dalvik + Internal Storage). Perform a format too after wipe to be on the safer side. Now copy a custom ROM or MIUI ROM to your Internal Storage or SD card through a computer. Once copied install your ROM.
If you flashed custom ROM flash Gapps after flashing ROM. Reboot.
If you flashed MIUI, flash lazyflasher after that(or phone will be stuck at MI logo). Reboot.
You can find download links for lazyflasher here on XDA or you can google it too.
Click to expand...
Click to collapse
awais_666 said:
hi i tryed to convert my redmi note 4x to global when flashing with mi flash tool i did it without clean and after that firmware finish installing but got stuck in bootloop now i flashed twrp and tryed to flash custom rom but again bootloop when i check my storage it shows 9gb now when its actual is 32gb i think i disturbed partitions any solution available?
Click to expand...
Click to collapse
@ArK96 is right but the only thing i suggest is to, flash miui and lazyflasher first so as to properly set up the initial firmware, and partitioning. After miui boots properly, you can do anything you want. :highfive:
ArK96 said:
Are you able to boot into TWRP?? If not flash TWRP first using fastboot.
Once you have access to TWRP boot into it and perform a full wipe (System + Data + Cache + Dalvik + Internal Storage). Perform a format too after wipe to be on the safer side. Now copy a custom ROM or MIUI ROM to your Internal Storage or SD card through a computer. Once copied install your ROM.
If you flashed custom ROM flash Gapps after flashing ROM. Reboot.
If you flashed MIUI, flash lazyflasher after that(or phone will be stuck at MI logo). Reboot.
You can find download links for lazyflasher here on XDA or you can google it too.
Click to expand...
Click to collapse
thank you for a quick reply yes i am able to go into twrp and i did format system data cache dalvik and internal storage and after wipe did format too but still stuck at same issue and when i open the internal storage in my computer it shows only 9gb storage
MyNameIsRage said:
@ArK96 is right but the only thing i suggest is to, flash miui and lazyflasher first so as to properly set up the initial firmware, and partitioning. After miui boots properly, you can do anything you want. :highfive:
Click to expand...
Click to collapse
ok so the normal global firmware will do? i didnt do with lazyflasher but will do it now
awais_666 said:
ok so the normal global firmware will do? i didnt do with lazyflasher but will do it now
Click to expand...
Click to collapse
you mean the global rom? yes the one you downloaded from en.miui.com
MyNameIsRage said:
you mean the global rom? yes the one you downloaded from en.miui.com
Click to expand...
Click to collapse
yes thats the one downloading now thank you guys for quick response ill update once done
@MyNameIsRage thank you for correcting me.
Yes. Please do flash MIUI and lazy first. Looks like you messed up your partitions.
Peace.
hey guys i tryed the following method luckily now storage is shown as 23 gb but when i flash miui rom in twrp the process doesnt complete its like the process bar goes till 95 percent and after that it keeps flashing but nothing happening i left the phone like this for 2 hours for 2 times but nothing happened am i doing something wrong here
awais_666 said:
hey guys i tryed the following method luckily now storage is shown as 23 gb but when i flash miui rom in twrp the process doesnt complete its like the process bar goes till 95 percent and after that it keeps flashing but nothing happening i left the phone like this for 2 hours for 2 times but nothing happened am i doing something wrong here
Click to expand...
Click to collapse
After flashing MIUI and lazy you flashed MIUI again is that what you are saying?
ArK96 said:
After flashing MIUI and lazy you flashed MIUI again is that what you are saying?
Click to expand...
Click to collapse
nop i formatted everything and then install miui rom for redmi note 4x which doesnt finish installing
awais_666 said:
nop i formatted everything and then install miui rom for redmi note 4x which doesnt finish installing
Click to expand...
Click to collapse
Go here and download the Global Stable worldwide release version firmware.
Boot into twrp wipe and format everything. Also after that reflash TWRP again using fastboot.
Once reflashed boot into TWRP and again perform a full wipe and format, then install the downloaded firmware zip. After that reboot TWRP and try flashing MIUI.
ArK96 said:
Go here and download the Global Stable worldwide release version firmware.
Boot into twrp wipe and format everything. Also after that reflash TWRP again using fastboot.
Once reflashed boot into TWRP and again perform a full wipe and format, then install the downloaded firmware zip. After that reboot TWRP and try flashing MIUI.
Click to expand...
Click to collapse
cool will try that in a while just a quick question i read somewhere that do the same process with red wolf recovery rather then twrp does that make any difference
awais_666 said:
cool will try that in a while just a quick question i read somewhere that do the same process with red wolf recovery rather then twrp does that make any difference
Click to expand...
Click to collapse
Yes. Red wolf is more MIUI friendly, it is made with OTA survival in mind. But your issue is that the ROM is not getting flashed. You can try what I said above about TWRP reflash, if it doesn't work you can go ahead and try redwolf. REDWOLF is nothing but modded TWRP, base code is still TWRP.
ArK96 said:
Yes. Red wolf is more MIUI friendly, it is made with OTA survival in mind. But your issue is that the ROM is not getting flashed. You can try what I said above about TWRP reflash, if it doesn't work you can go ahead and try redwolf. REDWOLF is nothing but modded TWRP, base code is still TWRP.
Click to expand...
Click to collapse
hey mate finally i got time to do the procedure i flashed the kernel that you told and on top of it the firmware and lazyflasher it went through in just few minutes and was all done and working perfectly now thanks alot
awais_666 said:
hey mate finally i got time to do the procedure i flashed the kernel that you told and on top of it the firmware and lazyflasher it went through in just few minutes and was all done and working perfectly now thanks alot
Click to expand...
Click to collapse
Good job mate.
Hello everyone,
Having a series of bug that I did not like, I tried to flash my mi9 with an older version of the EU rom.
Since, my phone reboots constantly on TWRP and if I go in the files of the SD card, it is big anything in it.
Basically my phone is bricked.
I need your help to get by because the only thing that starts is TWRP ..
Someone could he save me?
Based on ny previous experience with another Android devices, I think your Mi 9 is far from beying bricked. All you need is to flash a stock image through fastboot.
Ticiano said:
Based on ny previous experience with another Android devices, I think your Mi 9 is far from beying bricked. All you need is to flash a stock image through fastboot.
Click to expand...
Click to collapse
i have just tested with fastboot and i have a message when mi tools flash the system part: error failed : data transfert failure ...
I have downloaded europe latsest stable. .I try to download latest GLOBAL stable.. It may be that ..
SirTAVARES said:
u didn't format data... just follow this:
1 - Flash & Boot TWRP
2 - Format Data
3 - Wipe (Dalvik Cache, System, Data, Cache)
4 - Copy the ROM to the internal storage
5 - Flash the ROM & Reboot
6 - Reboot to TWRP and Flash Magisk [optional]
Click to expand...
Click to collapse
Arf.. I read your post too late and I already have a flash fastboot ... Grrrr
Now I have no more twrp, so
Just tested with global fastboot rom and "Flash system error'
Help !
flashed with mi tools2018-5-28-0 and : SUCCESS !
fanfan7110 said:
Just tested with global fastboot rom and "Flash system error'
Help !
flashed with mi tools2018-5-28-0 and : SUCCESS !
Click to expand...
Click to collapse
Got it sorted yeah?
kickassdave said:
Got it sorted yeah?
Click to expand...
Click to collapse
The phone is working again .. Oufff.
I had the same problem...
SirTAVARES said:
u didn't format data... just follow this:
1 - Flash & Boot TWRP
2 - Format Data
3 - Wipe (Dalvik Cache, System, Data, Cache)
4 - Copy the ROM to the internal storage
5 - Flash the ROM & Reboot
6 - Reboot to TWRP and Flash Magisk [optional]
Click to expand...
Click to collapse
I do the same steps and when i wiped my phone restarted and i'm now blocked on bootloader screen and i can't get in twrp mode. Some one can help to unbrick my phone ?:crying:
SirTAVARES said:
u can only reboot to recovery after formatting data!
and not after wiping
Click to expand...
Click to collapse
can you halp me with this?
SirTAVARES said:
u didn't format data... just follow this:
1 - Flash & Boot TWRP
2 - Format Data
3 - Wipe (Dalvik Cache, System, Data, Cache)
4 - Copy the ROM to the internal storage
5 - Flash the ROM & Reboot
6 - Reboot to TWRP and Flash Magisk [optional]
Click to expand...
Click to collapse
This steps can be applied for upgrading from P to Q too ?
You don't have to reboot after formatting data ?
But never reboot after wiping system, yeah
ManuBBXX said:
This steps can be applied for upgrading from P to Q too ?
You don't have to reboot after formatting data ?
But never reboot after wiping system, yeah
Click to expand...
Click to collapse
Uhh yeah! You need to reboot to recovery to see if TWRP is still on there. Formatting means EVERYTHING gets yeeted out the back door. When you format data, always, and I mean ALWAYS reboot to recovery, and then you can flash your vendor image following your rom.
well, i flashed the android 10 version from "mi dot com/global/androidqbeta" , then i wanted to go back to the pixel experience rom and it didn't boot, it boot loped to twrp, so, I wiped all the partitions, and tried to flash the global version that came with the phone and it gives me the error "vendor error flashing" and then on another try after flashing the vender through twrp "system error flashing", then I formated all the partitions and then tried with the miflash tool version 2018-5-28, and it says device mismatch, but I am sure I have the mi 9 cepheus, 64gb 6gb ram, do i try flashing it with the European version ? i remember it came with the global version ...
[edit]
well, i solved it by making sure i had the same name on the folder that i had on the decompressed folder .. i've never encountered such an error
hope this helps someone ahah
fanfan7110 said:
Hello everyone,
Having a series of bug that I did not like, I tried to flash my mi9 with an older version of the EU rom.
Since, my phone reboots constantly on TWRP and if I go in the files of the SD card, it is big anything in it.
Basically my phone is bricked.
I need your help to get by because the only thing that starts is TWRP ..
Someone could he save me?
Click to expand...
Click to collapse
You use Mi flash 2018.5.28 https://drive.google.com/uc?id=1fGtVqNIPooDlxa-PAXBhJ4W85RPJ-Aaz&export=download
and Flash rom dev Global 9.6.27 https://mega.nz/#!CooF0CQS!qms2GwgiGq0ao9JThMUinTJVxwcJdlwnORl2S64mxrg