Related
Hi,
I'm using a galaxy s2 gt-i9100 as a spare phone and i thought it would be a good idea to upgrade from CM13.1 to lineage os 14...
Unfortunately that didn"t go well, the phone is not bricked BUT :
1)i can only flash recovery using odin, heimdall says flash ok but recovery never changes, same as when i tried to install the TWRP recovery from a zip file in the CWM 6.0.2.9 recovery
2) flashing from that CWM version a lineage os zip file always resulted in the progress bar to be stuck at the very begining of the process so i updated the phone with a 3GB PIT file to fix the issue.
3) now the same CWM doesn"t want to mount the SD card while it's working perfectly from within the phone or with the phone(using latest stock firmware) on my PC
4) i can"t use that CWM as recovery because i can't use adb sideload or install zip from a file anymore(i guess due to the 3GB PIT file)
So is it possible to have a TWRP recovery flashable with odin for the GT-I9100 ?
Will that TWRP recovery finally allow me to flash the lineage os zip file?
thanks,
NHJ1981 said:
Hi,
I'm using a galaxy s2 gt-i9100 as a spare phone and i thought it would be a good idea to upgrade from CM13.1 to lineage os 14...
Unfortunately that didn"t go well, the phone is not bricked BUT :
1)i can only flash recovery using odin, heimdall says flash ok but recovery never changes, same as when i tried to install the TWRP recovery from a zip file in the CWM 6.0.2.9 recovery
2) flashing from that CWM version a lineage os zip file always resulted in the progress bar to be stuck at the very begining of the process so i updated the phone with a 3GB PIT file to fix the issue.
3) now the same CWM doesn"t want to mount the SD card while it's working perfectly from within the phone or with the phone(using latest stock firmware) on my PC
4) i can"t use that CWM as recovery because i can't use adb sideload or install zip from a file anymore(i guess due to the 3GB PIT file)
So is it possible to have a TWRP recovery flashable with odin for the GT-I9100 ?
Will that TWRP recovery finally allow me to flash the lineage os zip file?
thanks,
Click to expand...
Click to collapse
First--you can't mount sdcard after repit if you didn't format it
Second--repit using 3GB PIT is useless procedure, because you only changed the data partition size, instead repit with a 1GB_3GB.pit to change system partition to 1GB.
Third--to get TWRP 3 you must be on a rom with a kernel that supports isorec recovery, so you should flash a CWM kitkat compatible recovery through Odin and reboot to recovery and flash latest CM11 to get isorec support then reboot to recovery flash TWRP 3.0.2.1 image and then reboot recovery and flash your desired nogut rom and gapps.
If you couldn't understand me, then simply follow this guide
Hello,
thanks for your reply, it was exactly what i was looking for, i wish my Google searches about that matter redirected me to that tutorial.
IT worked brilliantly exept an error regarding formating and mounting of data partition after the use of the PIT file but upon restart, the procedure : 'Go to Wipe -> Advanced wipe,
select Dalvik, Cache, System, System, Data, Internal Storage then Swipe to Wipe, go back to TWRP Home.' completed without any errors.
That old phone is now running nougat.
NHJ1981 said:
Hello,
thanks for your reply, it was exactly what i was looking for, i wish my Google searches about that matter redirected me to that tutorial.
IT worked brilliantly exept an error regarding formating and mounting of data partition after the use of the PIT file but upon restart, the procedure : 'Go to Wipe -> Advanced wipe,
select Dalvik, Cache, System, System, Data, Internal Storage then Swipe to Wipe, go back to TWRP Home.' completed without any errors.
That old phone is now running nougat.
Click to expand...
Click to collapse
Great, happy to help
Enjoy the Nogut taste
Hi,
I wanted to upgrade my i9100 so i used odin 3.04 to flash the kitkat compatible .tar file you mentioned through download mode. The flashing in odin showed no errors but my phone is dead now and doesnt turn on!
Now i can only get into download mode using the key combinations.
What did i do wrong coming from CM9.1 with cwm 6.0.1.2 on it. And how to fix this?
ANDRiMiON said:
Hi,
I wanted to upgrade my i9100 so i used odin 3.04 to flash the kitkat compatible .tar file you mentioned through download mode. The flashing in odin showed no errors but my phone is dead now and doesnt turn on!
Now i can only get into download mode using the key combinations.
What did i do wrong coming from CM9.1 with cwm 6.0.1.2 on it. And how to fix this?
Click to expand...
Click to collapse
Your phone won't boot of course, because the kernel recovery you flashed is a kitkat kernel recovery, just reflash it again with a pit with 1GB system or more and your desired data partition size, all pits are available in repartition guide by saber, after you enter into recovery, you should navigate to mount then "format sdcard" or "format internal sdcard", i don't actually remember the option, then format it and format data and system and cache and dalvik cache, then install the latest cm11 rom to get isorec support, then let it reboot, then reboot to recovery and flash TWRP 3.0.2-1 image from the TWRP 3 thread's download section, then reboot recovery and flash your desired nogut rom and gapps
Just a sec i will give you some links..
Much appreciated. I am really stuck right now.
Can i conclude that when i flash CWM 6.0.1.2 my CM9.1 will be alive and kicking?
I think i want that right now, i postpone the upgrade to the future. Not really comfy right now....
hmmm i can't find the link to CWM 6.0.1.2 for i9100. Thats what i need right now...
ANDRiMiON said:
Much appreciated. I am really stuck right now.
Can i conclude that when i flash CWM 6.0.1.2 my CM9.1 will be alive and kicking?
I think i want that right now, i postpone the upgrade to the future. Not really comfy right now....
hmmm i can't find the link to CWM 6.0.1.2 for i9100. Thats what i need right now...
Click to expand...
Click to collapse
you have to flash a kernel not just a recovery, try dirty flashing your cm9.1 again that should make it boot correctly, and will replace the current recovery with the recovery that comes with the rom
I found my cm9.1. How does dirty flashing works? Can it be done with odin?
Does this erase all my data on my device?
edit:
Do i choose pda or phone when entering cm9.1 in odin. And where to select wipe cache and dalvik cache?
CM11
1.5GB PIT Files or 1GB PIT Files by ELgmal 1GB is enough.
Kitkat compatible recovery
this is for future update
---------- Post added at 04:18 PM ---------- Previous post was at 04:16 PM ----------
ANDRiMiON said:
I found my cm9.1. How does dirty flashing works? Can it be done with odin?
Does this erase all my data on my device?
Click to expand...
Click to collapse
no just flash it in recovery and wipe cache and dalvik, if you had xposed then flash xposed after the rom and wipe dalvik and cache and reboot.
ps: next time you post, please quote my post or mention me in your post so i can reply faster to your post
no it won't delete any data
---------- Post added at 04:45 PM ---------- Previous post was at 04:18 PM ----------
andrimion said:
i found my cm9.1. How does dirty flashing works? Can it be done with odin?
Does this erase all my data on my device?
Edit:
Do i choose pda or phone when entering cm9.1 in odin. And where to select wipe cache and dalvik cache?
Click to expand...
Click to collapse
DON'T USE ODIN, the rom is zip flash it through recovery
The problem is i can't access the data partition in windows explorer so i can not place the cm 9.1 zip file on my device. I can enter the recovery mode though
ANDRiMiON said:
The problem is i can't access the data partition in windows explorer so i can not place the cm 9.1 zip file on my device. I can enter the recovery mode though
Click to expand...
Click to collapse
have you tried with an external sdcard?
you can use an adapter to connect your external sdcard to your pc and copy your rom to
That worked fine. My device is up and running.
Many thanks for your help!
ANDRiMiON said:
That worked fine. My device is up and running.
Many thanks for your help!
Click to expand...
Click to collapse
No problem, glad to help
MigoMujahid said:
First--you can't mount sdcard after repit if you didn't format it
Second--repit using 3GB PIT is useless procedure, because you only changed the data partition size, instead repit with a 1GB_3GB.pit to change system partition to 1GB.
Third--to get TWRP 3 you must be on a rom with a kernel that supports isorec recovery, so you should flash a CWM kitkat compatible recovery through Odin and reboot to recovery and flash latest CM11 to get isorec support then reboot to recovery flash TWRP 3.0.2.1 image and then reboot recovery and flash your desired nogut rom and gapps.
If you couldn't understand me, then simply follow this guide
Click to expand...
Click to collapse
thanks this really helped me, I was struggling to get lineage installed, I had CyAN12 rom before and wasnt easy to move from there
Hi, I am using Redmi Note 3 Pro(Snapdragon). I flashed custom rom by flashing CM14.1 Frimware Kenzo 12.04.2017, Lazy flash tool, RR-N-v5.8.3-20170709-kenzo-Weekly and Gapps. Everything is working file. I got an update to RR-N-v5.8.3-20170716-kenzo-Weekly, downloaded it and tries to flash. Go to twrp recovery and go to wipe then advanced then wipe Dalvik/ART Cache and Cache. Then i install successfully latest ROM. After that, when i reboot my device, it stucks on mi logo and restating. I have changed the bootanimation. Hepl me to go for the latest update.. When I tried to Restore the older version of RR Rom, My device sensors wll not work and i cant hear while i am calling. Plz solve this too..
tomsonmathewv said:
Hi, I am using Redmi Note 3 Pro(Snapdragon). I flashed custom rom by flashing CM14.1 Frimware Kenzo 12.04.2017, Lazy flash tool, RR-N-v5.8.3-20170709-kenzo-Weekly and Gapps. Everything is working file. I got an update to RR-N-v5.8.3-20170716-kenzo-Weekly, downloaded it and tries to flash. Go to twrp recovery and go to wipe then advanced then wipe Dalvik/ART Cache and Cache. Then i install successfully latest ROM. After that, when i reboot my device, it stucks on mi logo and restating. I have changed the bootanimation. Hepl me to go for the latest update.. When I tried to Restore the older version of RR Rom, My device sensors wll not work and i cant hear while i am calling. Plz solve this too..
Click to expand...
Click to collapse
If you can clean flash do that or else wipe system , cache , dalvik cache flash new build n reboot
Sent from my Redmi Note 3 using Tapatalk
VaibhavKumar07 said:
If you can clean flash do that or else wipe system , cache , dalvik cache flash new build n reboot
Click to expand...
Click to collapse
Is there anyway to update without loosing any data? Wipe system and other things will clean my all data and i need to start from the beginning. That was too bad. I hate this process. Tell me how did u flash? or Is there any other way to flash without loosing data?
Just wipe system , cache & dalvik cache you'll not lose any data
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 08:29 AM ---------- Previous post was at 08:28 AM ----------
Also if you wanna mod system like changing bootanimation manually etc you may brick device if you update to latest build
Sent from my Redmi Note 3 using Tapatalk
I unlocked my bootloader with unofficial zcx rom and flashed liquid remix 8.1.0 and phone is rebooting in almost 3 to 4 minutes and I've tried 3 4 other roms and in every rom my device boots in 3-4 mins. Reflashed stock rom unlocked bootloader again with zcx rom and flashed custom rom liquid remix 9.0 still phone is rebooting in around 4 min. Is there any solution to fix slow startup?
myself_rashid1996 said:
I unlocked my bootloader with unofficial zcx rom and flashed liquid remix 8.1.0 and phone is rebooting in almost 3 to 4 minutes and I've tried 3 4 other roms and in every rom my device boots in 3-4 mins. Reflashed stock rom unlocked bootloader again with zcx rom and flashed custom rom liquid remix 9.0 still phone is rebooting in around 4 min. Is there any solution to fix slow startup?
Click to expand...
Click to collapse
Download orange fox recovery.
https://sourceforge.net/projects/orangefox/files/kenzo/
Now Go in to zcx recovery
Flash fox recovery zip
U will automatocally boot into new fox recovery .
Now u have fox recovery.
First format data and then wipe data.
FORMAT DATA IS VERY VERY IMPORTANT. WIPE DATA IS NOT SAME.
if u dont do format data . rom will not boot.
So try to search format data option and use it.
+1 for @naik2902 if yu go from miui to any aosp, you have to format data in order to make everything work propertly (any twrp based recovery -> wipe -> format data -> type yes)
make a backup before everything you need from internal storage.
taking much longer time to reboot in recovery
after installing orangefox recovery and wiping the data now my device is taking more time to reboot into recovery mode.
naik2902 said:
Download orange fox recovery.
https://sourceforge.net/projects/orangefox/files/kenzo/
Now Go in to zcx recovery
Flash fox recovery zip
U will automatocally boot into new fox recovery .
Now u have fox recovery.
First format data and then wipe data.
FORMAT DATA IS VERY VERY IMPORTANT. WIPE DATA IS NOT SAME.
if u dont do format data . rom will not boot.
So try to search format data option and use it.
Click to expand...
Click to collapse
myself_rashid1996 said:
after installing orangefox recovery and wiping the data now my device is taking more time to reboot into recovery mode.
Click to expand...
Click to collapse
Can u flash and succesfully boot into rom?
naik2902 said:
Can u flash and succesfully boot into rom?
Click to expand...
Click to collapse
Yes! I'm using custom rom liquid remix
Any solutions?
I have a kenzo snapdragon. Whenever I flash any rom like nitrogen,havoc etc. The device daoesnt boot. I get stuck on bootlogo cant boot into system. Previously i backed up the stock MiUi rom which came with the device. By restoring that i was able to get the device running and can use it. But now i had to format my kenzo and therefore i lost that backup. Now no rom is booting up for me. I have unlocked bootoader officailly and havw twrp installed. Please tell me what am i doing wrong. Why this roms arent booting up?
Anirudh44 said:
I have a kenzo snapdragon. Whenever I flash any rom like nitrogen,havoc etc. The device daoesnt boot. I get stuck on bootlogo cant boot into system. Previously i backed up the stock MiUi rom which came with the device. By restoring that i was able to get the device running and can use it. But now i had to format my kenzo and therefore i lost that backup. Now no rom is booting up for me. I have unlocked bootoader officailly and havw twrp installed. Please tell me what am i doing wrong. Why this roms arent booting up?
Click to expand...
Click to collapse
Make sure u came from latest miui rom 9 or 10.
Reason why its not booting is coz ur data and internal sd is encrypted . coz u came from miui. Miui encrypts data and internal sd by default. So custom roms cant boot it.
U need to format data in twrp.
Go to twrp
press format data.
Type YES to format
Format command will decrypt and erase ur data and internal sd.
So before that take backup of internal sd.
So first format data( must do)
Then wipe data reset
Flash rom
Flash gapps
Reboot
Black_Stark said:
Make sure u came from latest miui rom 9 or 10.
Reason why its not booting is coz ur data and internal sd is encrypted . coz u came from miui. Miui encrypts data and internal sd by default. So custom roms cant boot it.
U need to format data in twrp.
Go to twrp
press format data.
Type YES to format
Format command will decrypt and erase ur data and internal sd.
So before that take backup of internal sd.
So first format data( must do)
Then wipe data reset
Flash rom
Flash gapps
Reboot
Click to expand...
Click to collapse
I did that. I also thought the same thing. Thats why i formatted data from twrp. And thats how i lost my backup. Bit it still isnt going past the boot logo for any roms.
Anirudh44 said:
I did that. I also thought the same thing. Thats why i formatted data from twrp. And thats how i lost my backup. Bit it still isnt going past the boot logo for any roms.
Click to expand...
Click to collapse
What miui version u r now.? 10.1 stable?
When u take twrp backup u should choose external sd card.
Black_Stark said:
Make sure u came from latest miui rom 9 or 10.
Reason why its not booting is coz ur data and internal sd is encrypted . coz u came from miui. Miui encrypts data and internal sd by default. So custom roms cant boot it.
U need to format data in twrp.
Go to twrp
press format data.
Type YES to format
Format command will decrypt and erase ur data and internal sd.
So before that take backup of internal sd.
So first format data( must do)
Then wipe data reset
Flash rom
Flash gapps
Reboot
Click to expand...
Click to collapse
Black_Stark said:
What miui version u r now.? 10.1 stable?
When u take twrp backup u should choose external sd card.
Click to expand...
Click to collapse
I was on 7.3.6.0 miui which is the older version. Which came with the phone. I coulnt switch to any other rom. Cause it wasnt booting. Thats the main problem. And now i dont have that backup also
Anirudh44 said:
I was on 7.3.6.0 miui which is the older version. Which came with the phone. I coulnt switch to any other rom. Cause it wasnt booting. Thats the main problem. And now i dont have that backup also
Click to expand...
Click to collapse
Lol.....:laugh:now i caught u.
Ur device is kenzo right???
U r on outdated 7.3.6 version. Ur bootloader is outdated.
download and flash this kenzo 10.1 stable firmware first.
Its 50mb zip file.
Go to twrp and flash this zip
Flash only if u r offically unlocked bootloader.
https://sourceforge.net/projects/xi...V10.1.1.0.MHOMIFI_a5f84d1b80_6.0.zip/download
After flashing firmware
U can Then format data
Wipe data reset
Flash rom
Flash gapps
Rebooot
It will succesfully boot.
---------- Post added at 02:30 PM ---------- Previous post was at 02:22 PM ----------
Use only twrp official 3.2.3 latest version
https://dl.twrp.me/kenzo/twrp-3.2.3-0-kenzo.img.html
Black_Stark said:
Lol.....:laugh:now i caught u.
Ur device is kenzo right???
U r on outdated 7.3.6 version. Ur bootloader is outdated.
download and flash this kenzo 10.1 stable firmware first.
Its 50mb zip file.
Go to twrp and flash this zip
Flash only if u r offically unlocked bootloader.
https://sourceforge.net/projects/xi...V10.1.1.0.MHOMIFI_a5f84d1b80_6.0.zip/download
After flashing firmware
U can Then format data
Wipe data reset
Flash rom
Flash gapps
Rebooot
It will succesfully boot.
---------- Post added at 02:30 PM ---------- Previous post was at 02:22 PM ----------
Use only twrp official 3.2.3 latest version
https://dl.twrp.me/kenzo/twrp-3.2.3-0-kenzo.img.html
Click to expand...
Click to collapse
Thanks very much mate.... But I didnt see ur reply and flashed global stable MIUI 10 rom on my device through mi flash. And guess what the device is working perfectly fine. So in that sense u were right. I think it would have been cause of outdated bootloader. But the sad thing is my bootloader got locked again.
Now have to wait 72 hours more for unlocking....
Anirudh44 said:
Thanks very much mate.... But I didnt see ur reply and flashed global stable MIUI 10 rom on my device through mi flash. And guess what the device is working perfectly fine. So in that sense u were right. I think it would have been cause of outdated bootloader. But the sad thing is my bootloader got locked again.
Now have to wait 72 hours more for unlocking....
Click to expand...
Click to collapse
Lol...u selected" flash all and lock " option.
U should select "flash all" option.
Black_Stark said:
Lol...u selected" flash all and lock " option.
U should select "flash all" option.
Click to expand...
Click to collapse
Yes Im pretty sure i selected 'flash all' option. Not the lock option. But i did got locked.
Anirudh44 said:
Yes Im pretty sure i selected 'flash all' option. Not the lock option. But i did got locked.
Click to expand...
Click to collapse
Even if u get locked again, u don't need to wait to get permission again. Just login to mi unlock app with the id u got permission in thw 1st place. Then just unlock the phone.
Black_Stark said:
Make sure u came from latest miui rom 9 or 10.
Reason why its not booting is coz ur data and internal sd is encrypted . coz u came from miui. Miui encrypts data and internal sd by default. So custom roms cant boot it.
U need to format data in twrp.
Go to twrp
press format data.
Type YES to format
Format command will decrypt and erase ur data and internal sd.
So before that take backup of internal sd.
So first format data( must do)
Then wipe data reset
Flash rom
Flash gapps
Reboot
Click to expand...
Click to collapse
or else just flash lazy flasher....and decrypt the device
Black_Stark said:
Make sure u came from latest miui rom 9 or 10.
Reason why its not booting is coz ur data and internal sd is encrypted . coz u came from miui. Miui encrypts data and internal sd by default. So custom roms cant boot it.
U need to format data in twrp.
Go to twrp
press format data.
Type YES to format
Format command will decrypt and erase ur data and internal sd.
So before that take backup of internal sd.
So first format data( must do)
Then wipe data reset
Flash rom
Flash gapps
Reboot
Click to expand...
Click to collapse
I'm facing the same issue, where no custom ROM will boot, but I came form latest global stable miui 10.1 and also flashed the latest firmware you linked just in case and still I can't boot with any custom ROM installed. I have officially unlocked my bootloader and I'm using latest twrp. I followed your instructions but I still have this problem.
jimakos98 said:
I'm facing the same issue, where no custom ROM will boot, but I came form latest global stable miui 10.1 and also flashed the latest firmware you linked just in case and still I can't boot with any custom ROM installed. I have officially unlocked my bootloader and I'm using latest twrp. I followed your instructions but I still have this problem.
Click to expand...
Click to collapse
R u flashing magisk ?
Black_Stark said:
R u flashing magisk ?
Click to expand...
Click to collapse
No, I
flash firmware
format data
advanced wipe --> wipe data, system, cust, dalvik / art cache, internal storage
flash rom
flash gapps
reboot
and get infinite boot logo animation.
If you use redwolf or orangefox recovery, no need lazy flasher. Orange fox contain magisk install menu.
Hello everyone,
Having a series of bug that I did not like, I tried to flash my mi9 with an older version of the EU rom.
Since, my phone reboots constantly on TWRP and if I go in the files of the SD card, it is big anything in it.
Basically my phone is bricked.
I need your help to get by because the only thing that starts is TWRP ..
Someone could he save me?
Based on ny previous experience with another Android devices, I think your Mi 9 is far from beying bricked. All you need is to flash a stock image through fastboot.
Ticiano said:
Based on ny previous experience with another Android devices, I think your Mi 9 is far from beying bricked. All you need is to flash a stock image through fastboot.
Click to expand...
Click to collapse
i have just tested with fastboot and i have a message when mi tools flash the system part: error failed : data transfert failure ...
I have downloaded europe latsest stable. .I try to download latest GLOBAL stable.. It may be that ..
SirTAVARES said:
u didn't format data... just follow this:
1 - Flash & Boot TWRP
2 - Format Data
3 - Wipe (Dalvik Cache, System, Data, Cache)
4 - Copy the ROM to the internal storage
5 - Flash the ROM & Reboot
6 - Reboot to TWRP and Flash Magisk [optional]
Click to expand...
Click to collapse
Arf.. I read your post too late and I already have a flash fastboot ... Grrrr
Now I have no more twrp, so
Just tested with global fastboot rom and "Flash system error'
Help !
flashed with mi tools2018-5-28-0 and : SUCCESS !
fanfan7110 said:
Just tested with global fastboot rom and "Flash system error'
Help !
flashed with mi tools2018-5-28-0 and : SUCCESS !
Click to expand...
Click to collapse
Got it sorted yeah?
kickassdave said:
Got it sorted yeah?
Click to expand...
Click to collapse
The phone is working again .. Oufff.
I had the same problem...
SirTAVARES said:
u didn't format data... just follow this:
1 - Flash & Boot TWRP
2 - Format Data
3 - Wipe (Dalvik Cache, System, Data, Cache)
4 - Copy the ROM to the internal storage
5 - Flash the ROM & Reboot
6 - Reboot to TWRP and Flash Magisk [optional]
Click to expand...
Click to collapse
I do the same steps and when i wiped my phone restarted and i'm now blocked on bootloader screen and i can't get in twrp mode. Some one can help to unbrick my phone ?:crying:
SirTAVARES said:
u can only reboot to recovery after formatting data!
and not after wiping
Click to expand...
Click to collapse
can you halp me with this?
SirTAVARES said:
u didn't format data... just follow this:
1 - Flash & Boot TWRP
2 - Format Data
3 - Wipe (Dalvik Cache, System, Data, Cache)
4 - Copy the ROM to the internal storage
5 - Flash the ROM & Reboot
6 - Reboot to TWRP and Flash Magisk [optional]
Click to expand...
Click to collapse
This steps can be applied for upgrading from P to Q too ?
You don't have to reboot after formatting data ?
But never reboot after wiping system, yeah
ManuBBXX said:
This steps can be applied for upgrading from P to Q too ?
You don't have to reboot after formatting data ?
But never reboot after wiping system, yeah
Click to expand...
Click to collapse
Uhh yeah! You need to reboot to recovery to see if TWRP is still on there. Formatting means EVERYTHING gets yeeted out the back door. When you format data, always, and I mean ALWAYS reboot to recovery, and then you can flash your vendor image following your rom.
well, i flashed the android 10 version from "mi dot com/global/androidqbeta" , then i wanted to go back to the pixel experience rom and it didn't boot, it boot loped to twrp, so, I wiped all the partitions, and tried to flash the global version that came with the phone and it gives me the error "vendor error flashing" and then on another try after flashing the vender through twrp "system error flashing", then I formated all the partitions and then tried with the miflash tool version 2018-5-28, and it says device mismatch, but I am sure I have the mi 9 cepheus, 64gb 6gb ram, do i try flashing it with the European version ? i remember it came with the global version ...
[edit]
well, i solved it by making sure i had the same name on the folder that i had on the decompressed folder .. i've never encountered such an error
hope this helps someone ahah
fanfan7110 said:
Hello everyone,
Having a series of bug that I did not like, I tried to flash my mi9 with an older version of the EU rom.
Since, my phone reboots constantly on TWRP and if I go in the files of the SD card, it is big anything in it.
Basically my phone is bricked.
I need your help to get by because the only thing that starts is TWRP ..
Someone could he save me?
Click to expand...
Click to collapse
You use Mi flash 2018.5.28 https://drive.google.com/uc?id=1fGtVqNIPooDlxa-PAXBhJ4W85RPJ-Aaz&export=download
and Flash rom dev Global 9.6.27 https://mega.nz/#!CooF0CQS!qms2GwgiGq0ao9JThMUinTJVxwcJdlwnORl2S64mxrg