Updating my Android Car Navigation - Android Q&A, Help & Troubleshooting

Hi,
Since two years i have a car navigation in my car. Since i do not know where to look to update this android device i'm asking here.
Below you can find the specs:
Model: S07
MCU Version: MTCB-KLD2-V2.72
Android Version:
4.4.4_20082015
Kernel version: 3.0.36+ root @chun #58
Build number:
rk3188-eng4.4.4 20082015
CPU
ARM Cortex- A9
Where can i find updates?

Related

[Q] SignDroid? M3 Media Box Board

Hello,
I have a device in which I am attempting to get root.
Settings -> About Device shows the following information
Model Number: M3 media box board
Android Version: 2.3.4
Uboot version: V1.3.6-13-g49463f7(20111102.110343)
Recovery version: V1.3.0-32-g20c526c(20111101.190701)
Kernel version: 2.6.34 V1.3.0-56-g08e726c-dirty(20111212.115459)
Build number: 20120111.163332
This device seems to be a clone of the ATV1000-ATV2000 from Geniatech
I have attempted to use z4root which did not work.
Any information on this device would be helpful.
Thanks!

[Q]Permits ROOT and compatible ROM/s on Chinese Smartphone

Hello everyone! (I'm Italian, sorry for my bad English)
So my problems are these:
Assuming I have a Chinese Smartphone (known as "Star i1900") I can't give it root permissions, I tried various methods including:
1. z4Root
2. GingerBreak
3. SuperOneClick (of this I have tried three different versions)
4. UniversalAndroot
5. UnlockRoot
6. A script with .bat extension found on this forum
None of it worked!
So first question: Is there a way to give permissions to Root this damn Chinese phone?
Second problem:
I want to change the Android version in this smartphone, currently there is a very slow 2.3.6 (made ​​especially for him I guess, because it's a Dual Sim, TV etc.).
I mean, I understand that the phone has only one core 650 Mhz ... but I hope and believe that there is an Android version on which I run better.
Now I carry the information of the phone as they are written:
Model Number:
e1109_v73_jxlc1
Android Version:
2.3.6
Version banda base:
MAUI.11AMD.W11.37.SP.V17.F1, 03/14/2012 16:54
Kernel version:
2.6.35.7
Thu March 22 12:48:28 CST 2012
Build number:
ALPS.GB.FDD2.MP.V4.5
Custom Build Version:
1332391723
Well, since I do not think that this phone has Rom and everything else made ​​especially for him, I arose a doubt:
Can I change the Android version through a Rom official or not but based on another phone with the same characteristics?
P.s. His CPU is a Qualcomm MTK MT6573 650MHz
Thank you for any replies,
Forgive my titanic problem ... You are my last hope
Sorry for the "up"
These are some information from Quadrant:
System
Version SDK: 2.3.6
ID: GRK39F
Name OS: Linux
Version OS: 2.6.35.7
Version Dalvik VM: 1.4.0
Device
Model: e1109_v73_jxlc1
Product: e1109_v73_jxlc1
Board: e1109_v73_jxlc1
Brand: yusu
CPU
Name: ARMv6-compatible processor rev 7 (v6l)
All frequency are indicated by a "?"
Cores: 1
Cores per Java: 1
Architecture: 6
Hope this is useful...

is it possible to install new OS on this chinese phone?

before i dig any deeper i just want to make sure if it's even possible
here's the specifications from the "About phone":
Model number: W1169
Android version: 4.4.4
Baseband version: MT6589
Kernel version: Quad-Core Armv 7 Processor
Build number: DG613_Y430_OLEDE_V1.0.5|2013-11-0821:36:07|public-user
Hardware version: MT6589

PROBLEM UPDATING FIRMWARE RADIO [ROM][PX5][HD] Malaysk ROMs for PX5 (2-4 Gb) 8.0 MTCD

Good morning to all,
I am new on this, I bought this chinese radio, it has the following features:
MODELO: A-MEDIA AUTO (1024X600 S)
ANDROID VERSION: 6.0.1
KERNEL VERSION: 3.10.0 [email protected] #922
COMPILATION NUMBER: PX5-USERDEBUG 6.0.1 MXC89L
MCU VERSION: MTCD_KGL_V2.47_2 APR 28-2017
SERIES NUMBER: H190AKC0E000D001B
CPU: OCTA-CORE 64-BIT CORETEX A-53
MEMORY: 2000MB
I did all in this post:
https://forum.xda-developers.com/an...-malaysk-roms-px5-2-4-gb-8-0-android-t3762724
When i did what was determined in sd card 1, (mcu update) my android radio display went in black, no image found. P
Please, anybody help me solve this issue

Chinese Device - Upgrade from 5.1.1 - ST907

Hi All,
I've been scouring the net/forums for hours but have been able to get very far if i'm being honest, to be fair - I'm new to this.
Looking to upgrade from 5.1.1 to 6.0 or higher
So the company I work for issues Rugged tablets to engineers, these tablets are some variant or maybe the same as this.
aliexpress. com/item/7-rugged-Office-tablet-PC-Android-4-4-Data-processing-Warehouse-1D-2D-Barcode-Scanner-with/32651305648.html
My plan was to enrol these devices into our MDM but for that to work they need to be on 6.0 or above.
There is not a lot of info i can see but i'll list what i can.
Processor: Qualcomm MSM8916
Model Number: PAD
Android Version: 5.1.1
Baseband Version: .2.0.3.c1-00044-M8936FAAANUZM-1
Kernal Version: 3.10.49
[email protected] #1
Wed Mar 15 12:27:20 CST 2017
Build Number: PAD-userdebug 5.1.1 LMY47V eng.john.20170315_02.54-O
any help would be highly appreciated,
Thanks

Categories

Resources