stock Huewei Ascend xt stuck in bootloop / cant enter recovery mode - Android Q&A, Help & Troubleshooting

My fully stock ascend xt has got stuck in a bootloop at the huewei logo screen when i try to power it on. I have tried several times but it wont go into recovery mode with the power button + volume up button. I can get into the fastboot&rescue mode screen by pressing the power button + volume down button , but then i just see a the android robot with " PHONE Locked FRP Lock" written below it. I cant do anything at all on this screen however. Does anyone have any advice on how i can get this problem repaired? this is my primary phone at the moment and this is very frustrating to say the least
Thanks in advance to anyone thats helps me resolve this problem. :good:

Anyone ?

No one can help me with this issue?

Any advice?

Related

[Q] Razr power button problem

Hi, i need help with the power button. It stopped working suddenly (no way to unlock the phone).
Strange, but if the razr is turned off, it can be started by pressing power button, but it won`t work even in recovery menu.
Other strange thing is that i can`t start AP Fastboot mode, i only get black screen (i thought the error is software and wanted to reflash).

Bricked my Huawei Ascend P2; Please Help

Hello,
Could anyone help me.
I have a Huawei Ascend P2; which from a couple of days, when I restarted it, got stuck on logo screen "Huawei Ascend", and remains since there.
I entered the recovery by pressing "Vol +, Vol-, On/Off" buttons together, and I wiped cash and performed factory rest, but it did not solve the problem.
When I tried to apply update from SD card, I got an error "failed to mount mount E: /SDcard".
I also note that I cannot turn off the phone. It will just restart and stuck again on logo screen.
I tried to get into fastboot mode by keep pressing Vol- and On/Off buttons, but it seems it did not work. Except for "Fastboot reboot", all other fastboot instructions did not work.
I do not know what do do !! Any Ideas how to solve the problem?!! Please help ?!!
Thanks in advanced.

Can't enter recovery on Archos Platinum 50c

My brother fergot his password and therefore I need to factory reset the device using the recovery.
However, Volume up+ Power doesnt work for me, screen just goes black for a few seconds and it boots normally.
Anyone facing this issue too?
I have the Platinum 55d but...
I had trouble getting into recovery mode myself and this might help you.
Press and hold the power button and shortly thereafter press and hold the volume up button. Wait for the brand to load up and let go of the power button.
Wait for the android to show up. If it doesn't and the phone starts up normally, take out the battery and try again.
Once the android shows up hold the power button and tap the volume up button.
Same problem
I have the same problem
i start phone and try every way to get into recovery but cant get it on
did you find a fix?
me too! pls help!!
Thinking you can flash it with Sp-flashtool or http://www.mediafire.com/file/cgy6j622oq4lv7n/FACTORYDOWNLOAD_R2.9.9015.zip + driver
Offical firmware link etc. https://forum.xda-developers.com/android/help/archos-50c-platinum-archos-50cpl-twrp-2-t3594137
Btw sometimes it hard to boot into recovery so i use xposed to do that.

HELP! Blue Wave 8 33GT tablet stuck in recovery mode with "No command" message

HELP! Blue Wave 8 33GT tablet stuck in recovery mode with "No command" message
I got my Blue Wave 8 33GT (not HD+) tablet completely bricked. First of all, I know this is not really a popular device and some of you might not have a single knowledge about this one, but I hope in any way you might help me get this device working again. Thank you in advance!
Some info about this device:
Bluewave's website: Wave 8
Android OS version: 4.4 KitKat
Device processor: Rockchip-based (RK31)
What just happened? It suddenly reboots while I'm playing and gone into recovery mode with an Android and a "No command." message. Now it won't boot the system anymore whenever I reboot, it always going into this recovery mode.
It has no volume buttons, just a reset, a hard back button and power button. Holding down the power and back button goes into the recovery mode directly. Through normal boot, it flashes the Bluewave logo twice then goes into the recovery. While the reset button immediately turn the device off. There's nothing else I can think of that I can do in this case.
My laptop can recognize it as an ADB Device in recovery mode and I think I may be able to flash it via Rockchip BatchTool, but the instructions I've read states that the device should be up and with a USB debugging enabled which I am not currently able to do in recovery mode. Device is rooted and working totally fine until this happened.
Anyone got into this kind of problem and able to go through it? Please, any help is greatly appreciated.
P.S
Just let me know if there are any additional info I could give you.
What about hard reset.
May be this link help: https://drfone.wondershare.com/reset-android/hard-reset-android-without-volume-buttons.html
AutomaticSearches said:
What about hard reset.
May be this link help: https://drfone.wondershare.com/reset-android/hard-reset-android-without-volume-buttons.html
Click to expand...
Click to collapse
Hey! Thanks for your reply and time.
I tried every combination of either of the two keys but there is no such recovery menu showing up, and I am pretty sure that this device doesn't have a built-in recovery for factory reset.
If only I could go to its download mode stuff to be able to flash the firmware...
Humble Potato II said:
Hey! Thanks for your reply and time.
I tried every combination of either of the two keys but there is no such recovery menu showing up, and I am pretty sure that this device doesn't have a built-in recovery for factory reset.
If only I could go to its download mode stuff to be able to flash the firmware...
Click to expand...
Click to collapse
May be this site help: http://bluewave-global.com/wave_8.php#frame4
"Long press the power button to restart the device. If restarting fails, hard reset the tablet by poking the Reset hole using a pin. " it is from FAQ
maybe this could help.
1. Press the power button to get the option menu for
Power off
Reboot
Silence phone option.
2. on that menu you have to hold down that power off option on your touch screen while also holding down the home push button on the side of your tablet.
3. This brings up a screen to reboot into safe mode..(these are the 3 steps the company does not tell you that is why no one gets it to work.
4. HIt yes for safe mode and then hold down your power and home buttons on side of tablet till the dopo Logo appears.
5. Release both buttons and hit the power button one time and then hold only the home button down till a menu option appears.
6. Use the home button to move down to factory reset and press the power button to select. Once it says complete then use the power button to select reboot.
Problem solved. Hope this will help everyone out.
The only way is to remove the battery, attached again the battery then power it on their is no hard reset on blue wave the go to settings factory reset

Samsung A21s bootloop

Hey there, I'm stuck in a boot loop in my samsung galaxy a21s with the bootloader warning and the press power key button showing.
I used magisk to flash a custom rom and used odin to add it to my device. I'm kinda a novice when it comes to rooting so any help to getting out of the boot loop will be appreciated.
It will not boot to recovery or the download mode either
Fixed it! I just had to press volume UP and DOWN along with power until it rebooted and then afterwards I pressed volume UP and POWER to get to the download mode.
synnre said:
Fixed it! I just had to press volume UP and DOWN along with power until it rebooted and then afterwards I pressed volume UP and POWER to get to the download mode.
Click to expand...
Click to collapse
Very good to know , and thank you for putting it as you solved
Hey @synnre,
I have the same problem with the phone. It also shows "fingerprint protection failed" in the top left corner on booting screen.
The button combination you mentioned is not working.
Do you have any other ideas?
Thankful for any help!

Categories

Resources