Canvas nitro a311 softbricked, customer care cant repair it... - Micromax Canvas Nitro A310/A311

I TRIED TO REPAIR IT MYSELF AT HOME BUT YGDP FAILS AT 98%... AND SP FLASH TOOL GIVES BACK "S_BROM_CMD_JUMP_DA_FAIL( 2035)" found no solution on internet... it can still boot to fastboot mode... and when i turn it on it stucks at mmx logo.
please help...:crying::crying::crying:

sidhant1 said:
I TRIED TO REPAIR IT MYSELF AT HOME BUT YGDP FAILS AT 98%... AND SP FLASH TOOL GIVES BACK "S_BROM_CMD_JUMP_DA_FAIL( 2035)" found no solution on internet... it can still boot to fastboot mode... and when i turn it on it stucks at mmx logo.
please help...:crying::crying::crying:
Click to expand...
Click to collapse
( Solved )
1) switch off mobile and then connect it to pc
2) open device manager when shows your device then click shows hidden driver in device manager right click on all your device drivers and uninstall it
3)then disconnect phone and disable driver signature verification from windows setting
4)connect phone to pc pressing volume up button
5) in device manager you will see there unknown device or mt65xx preloader just right click on only unknown device and update driver manually ( the driver name mtk usb port) dont install mt65xx preloader driver
6) open sp flash tool select scatter file connect phone to pc when it shows mtk usb port in device manager click on download button
YOUR PROBLEM SOLVED if not work i am not responsible for your device bricked

Related

Preloader MT65xx is not visible in device manager

Hi guys,
I was recently trying to recover my IMEIs, I have formatted my device using SP Flash tool and when I tried to flash stock ROM after format, my PC is unable to recognize my device, I went to device manager and when I disconnected and reconnected my device to PC it is not showing any Preloader MT65xx, some "Alcatel .................." hardware is showing.
Please guide me how can make my Preloader visible in device manager. Please do not direct me to a tutorial of Installing VCOM driver, I know how to install VCOM driver, here I am unable to see my Preloader in the device manager.
dead_calm said:
Hi guys,
I was recently trying to recover my IMEIs, I have formatted my device using SP Flash tool and when I tried to flash stock ROM after format, my PC is unable to recognize my device, I went to device manager and when I disconnected and reconnected my device to PC it is not showing any Preloader MT65xx, some "Alcatel .................." hardware is showing.
Please guide me how can make my Preloader visible in device manager. Please do not direct me to a tutorial of Installing VCOM driver, I know how to install VCOM driver, here I am unable to see my Preloader in the device manager.
Click to expand...
Click to collapse
GUIDE TO RE FLASH/RECOVER/FIX IMEI (TESTED ON MICROMAX CANVAS HD A116)
If your problem is still not solved, the follow these steps:
1. Download SP flash tools, USB driver for your device, stock rom for your device.
2. Install usb drivers (no need to istall preloader etc.)
3. Run sp flash tools.
4. In scatter file, give path from stock rom (downladed as said above).
5. Remove battery, sim, and memory card all from your device.
6. On sp tools, click format and select whole flash.
7. Now keeping power button and volume buttons pressed, connect your device to pc/laptop. HOLD THE PHONE AS IS TILL SP TOOLS SAYS OK WITH GREEN CIRCLE.
8. Disconect your device after green signal on sp tool.
9. Click download on sp tools, and then follow step 7 as is. DO NOT RELEASE BUTTONS OR DISCONNECT PHONE TILL GREEN SUGNAL COMES.
10. Now install battery, sim n all. and reboot phone. Now if it stuck in boot loop. then install custom rom via recovery.
After rebooting your phone, got to engg mode and type your IMEI number and reboot andENJOY
HELP FROM WAVE RIDER

Z2a D6563 QHSUSB_BULK after D6563_23.1.A.0.726_Customized TW

my Z2A just turned on in recovery mode and update said in red letter update error
then download D6563_23.1.A.0.726_Customized TW.ftf and sent with flash tool,
disconnect to finish the phone and turned it on but nothing vibrate, reconnect the pc but recognized him as flash mode, i download another version of FTF to try to send another flash but flash tool say the phone was in mtp mode and look in device manager and now die QHUSB_BULK HELP
pleaseee help
You should try to install the QHUSB drivers first. Then see if your phone is in mode 9006 or 9008.
After that you can try to unbrick your phone using Sony Update Service tool.
Did you had any luck ?

My phone bricked

My phone was bricked.When I tried to install 4.1.2 version.It didn't load to me.Then I disconnected it from my Computer and it stuck on screen that show 'you need to connect your phone to computer' how to fix this?Please help me GT-i5500.
Fix your Bricked phone
first of all download your stock rom and sp flash tool. unzip your stock rom.
then open sp flash tool and load "scatter loader for mt65xx.txt".
Then connect your phone with usb cable without battery and click on "Download" in the sp flash tool.
that's it. wait a while it will show u a green ring when it is done.

Please Help Me

Sir,
I port rom cm 12.1 on my MT6582 Lenovo A328 device. As i power it off, it takes time to open and few seconds TWRP appears and i reboot the system and suddenly stucks on the cm logo and i removed the battery and open again and try and try again and it does not open. I thought that my phone is hard bricked so i connect the device without a battery to the computer via usb cable. Open the sp flash tool and open my scatter file and download....but sp flash tool download progress is color red which means connection on port problem. I open device manager and saw ports....MTK USB Port appears to be the kind of my driver's device and I think that it should be MTK Preloader VCom to be able to flash the stock rom.......Hope you understand and thank you so much for your time.....

Unknown Device when i connect my mtk65xx to pc

Hello i have a huawei p7 clone mtk6572, i forget my privacy protection password so i want to flash the ROM to get out this problem, but when i connect it to pc on fastboot mode it appears unknown device on device manager, already installed mt65xx preload vcom drivers but the problem still.
please help.
intel_wise said:
Hello i have a huawei p7 clone mtk6572, i forget my privacy protection password so i want to flash the ROM to get out this problem, but when i connect it to pc on fastboot mode it appears unknown device on device manager, already installed mt65xx preload vcom drivers but the problem still.
please help.
Click to expand...
Click to collapse
There may be a problem with the drivers. Use the following tutorial to fix the problem
http://www.makeuseof.com/tag/android-wont-connect-windows-adb-fix-it-three-steps/

Categories

Resources