with little to no activity lately for the LGV20, specifically the H918 T-Mobile variant I decided to look into creating a TWRP flashable package for the recent H91810p release. these zips flash every partition included in the latest KDZ package with the exception of recovery to keep TWRP. standard disclaimer applies, you do all of this at YOUR OWN risk! I've tested this on my device after backing up and so far so good on the latest 10p release. because 10p is not rootable, you need to be root'd before flashing this! failure to do so will probably cause you to lose root and/or lose TWRP! and worst of all, because 10p can't be downgraded, you're fscked!
NOTE: you can find the partitions that will be flashed in the updater-script. to be extra cautious you can back up all of the partitions that will be overwritten with the following: dd if=/dev/block/bootdevice/by-name/{partition} of=/external_sd/backup/{partition}.img.
Instructions:
download H91810p.zip file listed below and put on microSD card
backup any data from internal "SD card"
boot into TWRP (requires TWRP recovery to already be installed)
create a TWRP backup of the device
flash zip from microSD card by using "Install"
flash your choice of root, either Magisk or SuperSU *Note: v12.0 of Magisk does not work with the LGV20 device in general and v13.3 is recommended. Flashing root is VERY IMPORTANT BEFORE REBOOTING!
reboot
profit!
Download:
H91810p.zip md5sum: 700d43b365eea134d2d1431b347a9323
Flashing Process:
flash necessary partition images with the exception of recovery (to keep TWRP) from the KDZ
rename /system/recovery-from-boot.p to /system/recovery-from-boot.bak to prevent stock recovery from being installed on boot
wipes dalvik-cache and cache
BIG thanks to @McNutnut on guidance, as well as his script to put all of this together!
also thanks to @bullghost for the KDZ extractor (https://forum.xda-developers.com/showthread.php?t=2600575)
@Tilde88 for the original updater-script template w/root (https://forum.xda-developers.com/v20/development/us996-nrd90m-modded-notsostock-rom-v5-1-t3526542)
and lastly thanks to @dudeawsome for the 10p KDZ!
@dimm0k Thanks for the mention and great work!
Too much to worry about with this. Thanks for this though. Seems toooo risky. I'll hang...
storm68 said:
Too much to worry about with this. Thanks for this though. Seems toooo risky. I'll hang...
Click to expand...
Click to collapse
no reward without the risk!
dimm0k said:
no reward without the risk!
Click to expand...
Click to collapse
Lol.. good point. That's how we all started.. ?
storm68 said:
Lol.. good point. That's how we all started..
Click to expand...
Click to collapse
I hear you though... tough walking on thin ice, which is kind of what this would be... if you lose root for any reason, it could be game over. only reason I went ahead with it was because I have a second device for backup. hopefully the next release won't have anti-rollback
Does this overwrite the internal storage as part of the flash?
Gadianton said:
Does this overwrite the internal storage as part of the flash?
Click to expand...
Click to collapse
no, you can verify this within the updater script. it only flashes the partitions that affect the system's OS
Flashed and still rooted via Magisk. Only downside, bloatware is back. Anyone has a de-bloat list.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-H918 using Tapatalk
Big thanks to everyone that helped for this. I just want to show my appreciation because I know you guys don't have to do this for those of us (like me) that don't know how to do it for ourselves. Big thanks and thumbs up. [emoji106]
Sent from my LG-H918 using Tapatalk
bxlegend said:
Flashed and still rooted via Magisk. Only downside, bloatware is back. Anyone has a de-bloat list.
Click to expand...
Click to collapse
How's it running? Anything new? Any difference in performance?
storm68 said:
How's it running? Anything new? Any difference in performance?
Click to expand...
Click to collapse
Performance is about the same after the apps update and cache themselves. I'll have to check to see if the bugs in Bluetooth and second screen is fixed but that won't be until tomorrow when I start my day. Bedtime now. Be back later to update on things.
Sent from my LG-H918 using Tapatalk
Can we just flash the zip then SU? Or do we have to change the recovery partition first?
who cares? said:
Can we just flash the zip then SU? Or do we have to change the recovery partition first?
Click to expand...
Click to collapse
what do you mean change the recovery partition first? you need TWRP already installed as your recovery BEFORE you can flash this. then be sure to flash SU after this before rebooting.
dimm0k said:
what do you mean change the recovery partition first? you need TWRP already installed as your recovery BEFORE you can flash this. then be sure to flash SU after this before rebooting.
Click to expand...
Click to collapse
I am slightly confused by this part.....
Flashing Process:
flash necessary partition images with the exception of recovery (to keep TWRP) from the KDZ
rename /system/recovery-from-boot.p to /system/recovery-from-boot.bak to prevent stock recovery from being installed on boot
wipes dalvik-cache and cache
who cares? said:
I am slightly confused by this part.....
Flashing Process:
flash necessary partition images with the exception of recovery (to keep TWRP) from the KDZ
rename /system/recovery-from-boot.p to /system/recovery-from-boot.bak to prevent stock recovery from being installed on boot
wipes dalvik-cache and cache
Click to expand...
Click to collapse
The "Flashing Process" part only describes what goes on behind the curtains so to speak.
You must read the "Instructions" part
who cares? said:
I am slightly confused by this part.....
Flashing Process:
flash necessary partition images with the exception of recovery (to keep TWRP) from the KDZ
rename /system/recovery-from-boot.p to /system/recovery-from-boot.bak to prevent stock recovery from being installed on boot
wipes dalvik-cache and cache
Click to expand...
Click to collapse
sorry, that was just an outline of the process from what flashing this zip would do...
Lol..... After reading it a few times, the lightbulb clicked. Thanks for all your hard work on this
So after testing all day while at work, 10P seems to have fixed Bluetooth, 2nd screen, and Wi-Fi issues I was having.
Sent from my LG-H918 using Tapatalk
bxlegend said:
So after testing all day while at work, 10P seems to have fixed Bluetooth, 2nd screen, and Wi-Fi issues I was having.
Click to expand...
Click to collapse
Until you flash a different kernel.
Related
Here's the stock rooted XNPH44S ROM. Includes root(enable in Developer options) and the rest is untouched, so it's OTA safe
Custom kernel users may need to make a change to the build.prop to get root working if the default.prop in the kernel ramdisk if not set like I have it(may affect future OTAs)
Change
Code:
persist.sys.root_access=0
To
Code:
persist.sys.root_access=1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Stock Rooted XNPH44S ROM - Mirror
md5 - c43646eb36bbe4e2d3a0e7654c8e4419
XNPH44S Radio files, etc - Mirror
md5 - 83caeff9178f2910014f0be5ca02ce6d
Thanks
Sent from my A0001 using Tapatalk
---------- Post added at 08:24 PM ---------- Previous post was at 08:23 PM ----------
Mirror is not working. Fyi
Sent from my A0001 using Tapatalk
Devhost link downloads at sub-dial-up speeds.
Mirror is broken (seven years of bad luck for you)
Edit: I guess I jumped the gun a little on that one
Edit: So close to first
Someone do me favor and post a screenshot of the about window as I forgot to when I did a test flash as I want to include it in the OP
notyu1459 said:
Devhost link downloads at sub-dial-up speeds.
Mirror is broken (seven years of bad luck for you)
Click to expand...
Click to collapse
Mirror is still uploading but it should be done in about 10 mins or so :good:
Allright! Gonna do a clean install for this beast, anybody know if the camera is changed?
Great.. Thanks a lot!
Dev-host is slooow. Will wait for mirror.
Your the Man..thank you!
Is this ok to dirty flash over 38r? Then I guess flash radio file afterwards?? Does supersu need to be unistalled first?
Is this F2FS compatible? Also can i restore the 'data' from my nandroid backup if i flash this?
Basically is it flashable over 38R or requires to be a clean install?
@Calkulin any chance of making it comoatible f2fs?
Lookitfast said:
Is this ok to dirty flash over 38r? Then I guess flash radio file afterwards?? Does supersu need to be unistalled first?
Click to expand...
Click to collapse
It can be flashed over 38R without wiping and just flash the radio files after flashing the ROM. As for SuperSU, if it's still there after flashing(because it was updated through the play store), then just uninstall it as it won't work due to the su binary being the CM version
tofuboi01 said:
Is this F2FS compatible? Also can i restore the 'data' from my nandroid backup if i flash this?
Basically is it flashable over 38R or requires to be a clean install?
Click to expand...
Click to collapse
I don't think the stock kernel is F2FS compatible but if you change the kernel and format the partitions accordingly, it should work just fine
cashflip said:
@Calkulin any chance of making it comoatible f2fs?
Click to expand...
Click to collapse
All you need to do is change the updater script to format the system partition to F2FS while flashing the ROM and flash a kernel that supports F2FS & mounts the partitions as F2FS
Calkulin said:
It can be flashed over 38R without wiping and just flash the radio files after flashing the ROM. As for SuperSU, if it's still there after flashing(because it was updated through the play store), then just uninstall it as it won't work due to the su binary being the CM version
I don't think the stock kernel is F2FS compatible but if you change the kernel and format the partitions accordingly, it should work just fine
Click to expand...
Click to collapse
I will use AK kernel so f2fs is supported, but i just would like to confirm if this would flash on f2fs partition first?
thanks for the speedy response!
SuperSU cannot be used after flashing this rom?
metaldood said:
SuperSU cannot be used after flashing this rom?
Click to expand...
Click to collapse
refer to post 12
Thanks for putting this together
Eris-Droid X-Incredible-Rezound-S2-Galaxy Nexus-Note 2-Note 3-Moto X 2nd Gen-OnePlus One
Do we install radio as well if we're installing the ROM?
konman21 said:
Do we install radio as well if we're installing the ROM?
Click to expand...
Click to collapse
Post 12
Just did a factory reset and installed the ROM and radio. Upon boot up, I have no superuser at all.
Currently I'm reflashing the ROM after doing an advanced wipe with system, data, dalvik and cache to see if it fixes it.
Is this the right way to do it?
EDIT: Still no supersu. How do we get root working?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Based on Lollipop v5.1.1
Device C6833
Features Root & Multi-recovery included
Bootloader locked and unlocked
Built with XperiFirm and PRFCreator
Features
Odexed
Root
Multi-Recovery
Signed
Zipaligned
Pics quality tweaks (replacing the build.prop)
Snapdragon tweaks (replacing the build.prop)
Audio tweaks (replacing the build.prop)
Google DNS (replacing the build.prop)
Dialing tweaks (replacing the build.prop)
Network tweaks (replacing the build.prop)
Download
Firmware C6833_14.6.A.0.368 No Brand Italy Unlocked Bootloader (LP 5.1.1)
Firmware C6833_14.6.A.0.368 No Brand Italy Locked Bootloader (LP 5.1.1)
build.prop for C6833_14.6.A.0.368 edited by Jo-san
Xperium Bootanimation developed by Interface (Team Delirium)
How to flash it
make sure to be on a rooted rom with Philz recovery
download saving the rom on your External SD
reboot to Philz recovery
wipe (data, cache, dalvik/art cache) and format (cache, system, data)
flash rom
Info
to replace the build.prop you must replace it on system/ with the rw-r--r-- permissions
to replace the bootanimation you must replace it on system/media/ with the rw-r--r-- permissions
to install Xposed Installer properly you must download the APK and flash THIS from the recovery
I would say thanks to all the developers into theese tool projects [NUT], IaguCool and zxz0O0! Please to consider a donation for a beer!
Any damage is at your sole responsibility!
Does it work on the 6833 version?
albireox said:
Does it work on the 6833 version?
Click to expand...
Click to collapse
of course
Jo-san said:
of course
Click to expand...
Click to collapse
Thanks for this, it works fine, Unlocked, I did remove loads of apps and firmware to suit my own usage.. this just works.
(removed all social apps, auto up-load stuff, and a couple of silly thing like sketch and AR effects.. just stuff I don't need or want)
corum3 said:
Thanks for this, it works fine, Unlocked, I did remove loads of apps and firmware to suit my own usage.. this just works.
(removed all social apps, auto up-load stuff, and a couple of silly thing like sketch and AR effects.. just stuff I don't need or want)
Click to expand...
Click to collapse
Yes me too! It's a pleasure! I developed many rom for Galaxy Note before...but this is the first work i m sharing on xda...this isn t a so elaborate work but i m starting a deodex project #staytuned
Big thanks to the OP for this one have been foxed trying to root mine on lollipop and this is perfect!! This is untouched apart form the root and recovery?? What does the prop mod do??
Thanks Steve
Yep, this is an original firmware with root and recovery...the build.prop include my tweaks for a better wifi and 3g signal...increasing wifi and 3g performance...streaming video....battery performance..and other...
Please to follow my procedure to flash closely!
Jo-san said:
Please to follow my procedure to flash closely!
Click to expand...
Click to collapse
Whats the maximum cpu frequency from Sony in Stock Rom???
Sent from my Z Ultra using Tapatalk
Godaemon said:
Whats the maximum cpu frequency from Sony in Stock Rom???
Sent from my Z Ultra using Tapatalk
Click to expand...
Click to collapse
2.22
please, leave me a feedback
can i flash it on stock KK 4.4.4 ?
raisqureshi said:
can i flash it on stock KK 4.4.4 ?
Click to expand...
Click to collapse
Of course but follow my guide...you need root and recovery before flash my rom
Jo-san said:
Of course but follow my guide...you need root and recovery before flash my rom
Click to expand...
Click to collapse
Your guide is very basic, followed it with mine but it will not install. Says installing, 2 seconds later it tells me it's installed. But it's not.
Was you on Philz Recovery?
Jo-san said:
Was you on Philz Recovery?
Click to expand...
Click to collapse
Yes as I said I followed your guide so was using Philz Recovery, even tried TWRP still same result. Will try downloading again just to make sure it's not a corrupt zip file.
Will report back after downloaded and try installing again.
Edit: All good now, had the wrong version of Philz Recovery installed. Installed and running now.
samorgs said:
Yes as I said I followed your guide so was using Philz Recovery, even tried TWRP still same result. Will try downloading again just to make sure it's not a corrupt zip file.
Will report back after downloaded and try installing again.
Edit: All good now, had the wrong version of Philz Recovery installed. Installed and running now.
Click to expand...
Click to collapse
You have to revert back to kk and do a 100% wipe of data internal SD this is a common issue.
RealityFails said:
You have to revert back to kk and do a 100% wipe of data internal SD this is a common issue.
Click to expand...
Click to collapse
As I said, turned out I was using the wrong version of Philz. I was running KK, just that with the version of Philz I was using it just was not installing the ROM. Installed the correct Philz and it installed straight away.
?
samorgs said:
As I said, turned out I was using the wrong version of Philz. I was running KK, just that with the version of Philz I was using it just was not installing the ROM. Installed the correct Philz and it installed straight away.
Click to expand...
Click to collapse
Haha missed that Part
i m going to do a new rom as soon as the new firmware on xperifirm will be able to download
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OFFICIAL DOWNLOADS FOR SUZU:
https://twrp.me/sony/sonyxperiax.htmltwrp-3.x.x_x-x-suzu.img: Official TWRP image
DEVELOPMENT DOWNLOADS FOR SUZU:
Folder: https://sourceforge.net/projects/loire-development/files/twrp-recovery/suzu/twrp-3.x.x_x-x-YYYYMMDD-suzu.zip: Flashable unofficial TWRP to FOTAKerneltwrp-3.x.x_x-x-YYYYMMDD-suzu.img: Unofficial TWRP image
INSTALLATION
MANUALLY TO FOTAFastboot: Adapt the image name and install this way:fastboot flash recovery twrp-3.x.x_x-x-suzu.imgfastboot rebootFROM EXISTING RECOVERY
Enter to the current recovery
Install flashable TWRP
Reboot/Power off
HOW TO ENTER TO THE RECOVERY:
Power off your phone
Press Power and Vol- buttons at the same time until vibration
Wait for TWRP load
Sources:
TWRP device tree: https://github.com/TeamWin/android_device_sony_suzu/tree/android-9.0Kernel: https://github.com/Chippa-a/kernel-copyleft/tree/34.4.A.2.xxxThanks to the TWRP Team!
Backup-Restore function working fine so far, only issue I am seeing is phone is heating up pretty faster than before while backing up in compression mode.
Another minor thing is that earlier when entering recovery mode a purple light used to blink, now its missing.
Just saw this now and I'm really grateful. Big ups to you, man. Great work.
And I was afraid there would be no 3.2.1 for this device;
@Chippa_a makes it possible - intensified thanks! :highfive::good::good:
Thank you!!
I can't flash the zip because twrp does not give access to that part of the storage, weird.
fusk said:
I can't flash the zip because twrp does not give access to that part of the storage, weird.
Click to expand...
Click to collapse
Weird. Try using flash tool to fastboot the image if the flashable zip doesn't work for you.
Updated from TWRP, backup/restore works, no problems so far apart from it needs more than a minute till TWRP GUI appears after boot. Thanks for update.
Do you use the stock kernel? I installed the recovery built by oshmoun in the omnirom thread. It uses the aosp kernel. It starts faster, has a better sdcard naming and can flash oem images. Maybe you could try this kernel.
I use stock kernel (Pexorom 4.5) so this may be the reason for the delay.
I mean the kernel used with the recovery, not the rom kernel.
I_am_Blackford said:
Weird. Try using flash tool to fastboot the image if the flashable zip doesn't work for you.
Click to expand...
Click to collapse
This is what i did. Download img, place file on phone. Download twrp app, pick choose a file, browse to recovery.img, flash. Power off, boot to recovery = win.
Reboot to system, retry installing new update = great success.
mase76 said:
I mean the kernel used with the recovery, not the rom kernel.
Click to expand...
Click to collapse
Sorry, I didn't get it... kernels everywhere.
However, flashing with fastboot leads to the same delayed start. Strange.
privatim said:
Sorry, I didn't get it... kernels everywhere.
However, flashing with fastboot leads to the same delayed start. Strange.
Click to expand...
Click to collapse
I dont know if there is a connection, but i've tested the recovery with OmniROM 7.1.2, where display is not responding. It can be installed, shows 3.2.1, but display remains dead 4 touch.
Give this one a try:
https://forum.xda-developers.com/showpost.php?p=76440401&postcount=333
mase76 said:
Give this one a try:
https://forum.xda-developers.com/showpost.php?p=76440401&postcount=333
Click to expand...
Click to collapse
Same result, whether fastboot or flashtool, display is dead.
Certainly missed ODM LOIRE v12, v11 is installed.
Not really sure is the latest bootloader.
Does restoring a backup change the bootloader as well?
Edit: Solved: the answer is 'yes'.
3.2.1 does not work @7.1.2 restore because of outdated bootloader.
privatim said:
I use stock kernel (Pexorom 4.5) so this may be the reason for the delay.
Click to expand...
Click to collapse
Moved to XGEN ROM and now TWRP starts without delay. :good:
privatim said:
Moved to XGEN ROM and now TWRP starts without delay. :good:
Click to expand...
Click to collapse
What I do not understand, maybe bootloader or encryption, but why is 3.2.1 not backwards compatible on Suzu?
Is Omni 7.1.2 kernel (more I have not tried) or not current boot loader the reason?
Installed on last nougat internal storage 0 help
Inviato dal mio F5121 utilizzando Tapatalk
I'm glad that you finally managed to crack this damn decryption. I felt really bad with my broken promise of delivering the working build. I'm sorry, guys. @Chippa_a congratulations on your hard work
To be claim, i am NOT the maintianer.
Today, i want to share a GSI for every use of this phone and try to give everyone the lightest feeling of system to match the weight of this phone. So after hunders of fastboot flash, i succeesfully boot in system after flash, hope everyone can try and if any issue, you can commit this thread or pull a issue to this gsi github.
CLICK Guthub TO DOWNLOAD the "PixelExperience_Plus_arm-ab-11.0-xxxxxxxx-UNOFFICIAL.img.xz"
Three steps to flash:
1,Backup all your data and unzip the file you downloaded from github BTW.
2,If you want to get Magisk, flash Magisk before you flash PE. Without flash new bootimg, Magisk will be permanent.(option)
2,connect to computer and use command <adb reboot fastboot> or press vol- and power to rebbot to the fastboot mode.
3,use command<fastboot flash system xxx.img> to flash PEPlus, <fastboot reboot> to boot into system.
BTW, I am the people who are not native speakers of English, so if i use some wrong word, just let it go if didn't confuse you.
Hope you success.
If feedback of this rom is good, i will base on it to maintain the ROM that only for Mi11 Lite.
Thanks!
Do you mean Mi 11 Lite or Mi 11 Lite 5G??
vanpopel said:
Thanks!
Do you mean Mi 11 Lite or Mi 11 Lite 5G??
Click to expand...
Click to collapse
I flash it on my Mi 11 Lite 5G and it work.
Hi, which version to download, a only or ab??? Is there a way to debloat it before flashing??? Does it wipe data???
Thanks
So i need to download all the available img(or which one spesific) and flash them in fastboot mode and reboot system?
No need anything else right?
After boot i assume i can install magisk 23.0 apk and flash boot img created before throught fastboot right?
Is thats correct?
@ZeroSherd
rayman95 said:
Hi, which version to download, a only or ab??? Is there a way to debloat it before flashing??? Does it wipe data???
Thanks
Click to expand...
Click to collapse
Download ab version.
I don't think we con debolat it before flash
And yes it will wipe all your data.
paatha13 said:
So i need to download all the available img(or which one spesific) and flash them in fastboot mode and reboot system?
No need anything else right?
After boot i assume i can install magisk 23.0 apk and flash boot img created before throught fastboot right?
Is thats correct?
@ZeroSherd
Click to expand...
Click to collapse
You just need to download the ab verison and flash it by the command that i provide. If you need to flash magisk, i sugguest you patch the boot.img before you flash, and after the first boot you go to fastboot again to flash boot_ab that patched boot.img.
ZeroSherd said:
Download ab version.
I don't think we con debolat it before flash
And yes it will wipe all your data.
Click to expand...
Click to collapse
Thanks for your answer...what's the vndklite and is there advantage...I would like the more debloat, or with R/W....
rayman95 said:
Thanks for your answer...what's the vndklite and is there advantage...I would like the more debloat, or with R/W....
Click to expand...
Click to collapse
I did finding a way to get R/W according to patch the ROM without TWRP
ZeroSherd said:
You just need to download the ab verison and flash it by the command that i provide. If you need to flash magisk, i sugguest you patch the boot.img before you flash, and after the first boot you go to fastboot again to flash boot_ab that patched boot.img.
Click to expand...
Click to collapse
Thanks but where can i found boot.img of pe plus?
Can you provide it.
@rayman95 did you flash it ,all ok ,can provide some screenshot of the rom.
paatha13 said:
Thanks but where can i found boot.img of pe plus?
Can you provide it.
@rayman95 did you flash it ,all ok ,can provide some screenshot of the rom.
Click to expand...
Click to collapse
Of course, i will upload it to NETDISK after i finish my OT work that i may need half or A day to done it.
no, not yet....not sure to flash it right now, because I don't want to wipe my phone now....and I don't like gapps...I would love to have a recovery to flash nogoolag ur ULNP only and to do light rom
rayman95 said:
no, not yet....not sure to flash it right now, because I don't want to wipe my phone now....and I don't like gapps...I would love to have a recovery to flash nogoolag ur ULNP only and to do light rom
Click to expand...
Click to collapse
I think you can use ADB command or software to disable those GAPPS.
How do I backup the data if there is no custom recovery available?
In_a_state said:
How do I backup the data if there is no custom recovery available?
Click to expand...
Click to collapse
I highly recommand the TitaniumBackup if you got ROOT, or use MIUI backup which inside the settings.
Screenshot,feedback from the rom??
I would expect more interest for the first custom rom on this device
What's the way to go back to stock if got issues on PE???
Thanks
paatha13 said:
Screenshot,feedback from the rom??
I would expect more interest for the first custom rom on this device
Click to expand...
Click to collapse
Think most people are waiting on a working twrp recovery.
rayman95 said:
What's the way to go back to stock if got issues on PE???
Thanks
Click to expand...
Click to collapse
i didn't try, but i think just need to flash Xiaomi.eu ROM. By the "windows_fastboot_xxx" which in the ROM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ZeroSherd said:
i didn't try, but i think just need to flash Xiaomi.eu ROM. By the "windows_fastboot_xxx" which in the ROM.View attachment 5323491
Click to expand...
Click to collapse
where do you get this???
here what I have from last EU fastboot rom...
*************************************************************
———————— TWRP for K40 Pro + ——————————-
*************************************************************
WARNING : I do not know who made this TWRP and i am NOT taking credit for it. Someone in my group chat found it. It's apparently from China. If you are the creator , PM Me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INSTRUCTIONS
1) Download TWRP for K40 Pro + , and put it in your fastboot folder.
2) Put your phone into fastboot mode.
3) Do the following command : fastboot boot twrp-recovery-venus. It will automatically boot into TWRP.
4) Change language to English (press the 6th option).
5) Go to "Advanced" and select "Onekey inject TWRP".
6) Swipe to inject the TWRP. It might take a few minutes, so don't worry.
_____________________________________________________________________
Note: Don't change the boot slot (Slot A) or maybe will not boot at all.
Tested by @mslezak
______________________________________________________________________
Bugs: ADB Sideload is broken.
_______________________________________________________________
If you find any bug, feel free to report it down below.
Credits to @Cozzmy13 for decrypting the TWRP image! Here's the summary of events :
1) Chinese TWRP gets leaked onto my Telegram chat.
2) The recovery image is encoded and requires a dodgy chinese tool to decode it.
3) @Cozzmy13 finds a way to decode the image and make it bootable .
4) Me and Augustin El Metralleta try flashing the image, and we find out it works.
Does it suitable for K40 Pro? Did anyone try? Thanks!
K40 Pro has the same guts except the camera main and 12gb RAM so it should work
I verified a backup up image today restored worked although there wasn't much data on it. i always boot it. One time the injection made me have to use a fastboot ROM (always try deleting data first).
Have only one doubt can this twrp able to flash official china beta recovery rom for mi 11X pro?
#Update
I have flashed this twrp and it successfully booted without any issues and i have dirty flashed china beta recovery rom over chi a stable rom amd rom got flashed successfully without any issues.
But we need to flash the twrp every time when we reboot device.
cherri said:
How to make the twrp permanent then?
Click to expand...
Click to collapse
You can try to flash magisk after flashing the twrp, i'm still waiting the 7 days to unlock the bootloader so i can't try right now. If i remember correctly magisk has something that blocks "recovery-from-boot" and prevents twrp from being overwritten.
I think for now it is not possible are els he would have mentioned flashing process here instead of twrp temporary boot process, so we need to wait few more days unless someone does some miracle.
cherri said:
I think for now it is not possible are els he would have mentioned flashing process here instead of twrp temporary boot process, so we need to wait few more days unless someone does some miracle.
Click to expand...
Click to collapse
What do you mean. After flashing, TWRP was persistedm. I was also able to flash Magisk with this TWRP.
Go to "Advanced" and select "Onekey inject TWRP".
I wonder why there isn't any available tutorial on flashing twrp for this device on google, YouTube. What do you think guys?
thanks for the dev xinkid520 a chinese dev
It is indeed effective after testing, very good!
bouyhy01 said:
thanks for the dev xinkid520 a chinese dev
Click to expand...
Click to collapse
yeah he made it, but encrypted it and sold it for money.
so people from telegram decrypted it
zls8635878 said:
It is indeed effective after testing, very good!
Click to expand...
Click to collapse
So can we use this twrp permanently?
Can you tell me the steps if so?
DestroYerr said:
So can we use this twrp permanently?
Can you tell me the steps if so?
Click to expand...
Click to collapse
Go to "Advanced" and select "Onekey inject TWRP".
cherri said:
#Update
I have flashed this twrp and it successfully booted without any issues and i have dirty flashed china beta recovery rom over chi a stable rom amd rom got flashed successfully without any issues.
But we need to flash the twrp every time when we reboot device.
View attachment 5330171
Click to expand...
Click to collapse
I flashed this twrp into my phone. But when i try to install rom,recovery just flash and return to recovery again and ROM files got deleted. Could u tell me how u install this ROM?(PS my rom is (xiaomi.eu_multi_HMK40Pro_MI11i_V12.5.4.0.RKKCNXM_v12-11-fastboot)
Armstchi said:
I flashed this twrp into my phone. But when i try to install rom,recovery just flash and return to recovery again and ROM files got deleted. Could u tell me how u install this ROM?(PS my rom is (xiaomi.eu_multi_HMK40Pro_MI11i_V12.5.4.0.RKKCNXM_v12-11-fastboot)
Click to expand...
Click to collapse
Your rom version is for Fastboot, not Recovery.
k40 pro
majisk was installed.
I have a USB Memory Stick connected via an OTG cable, but I cannot mount it.
The usb format is FAT32. Please help someone.
cyaochai said:
k40 pro
majisk was installed.
I have a USB Memory Stick connected via an OTG cable, but I cannot mount it.
The usb format is FAT32. Please help someone.
Click to expand...
Click to collapse
Bro after flashing magisk, is safetynet okay?