Related
*** NanoROM 7.0.2 20170302 ****
=== See 2nd Post for ChangeLog ===
=== See 3rd Post for Kernel Settings ===
=== Disclaimer ===
Code:
This ROM is made for S6 G920F / G925F only
flash at your own risk, your warranty will be void (knox flag 0x1)
I'm not responsible if your device bricks or whatever.
=== What does TWOSP mean ===
TW = TouchWiz, OSP = Open Source Project. That's just same marketing-bull****-bingo-buzzword because this ROM contains lots of Open Source Software. Nothing serious.
=== Why yet another ROM ===
I'm one of those few users who experienced sudden random reboots after updating stock firmware after rooting their device. So the following huge text may contain a taste of drama.
No custom ROM or even Stock ROM did work for me, because PLOD(tm) (pink led of doom & Knuckles). Only working ROM is CM13, but that's lacking proper in-call mic (sometimes doesn't work) and Camera, so it's sadly a no-op.
So I was trying to figure out what goes wrong and try to build a ROM that does simply work for my device and not result in a myriad of random reboots. So here it is: my second customized stock android ROM (the first one was for some ARNOVA Tablet).
And since the ROM does now already exist, I was like:
"Hey, why not go to xda and publish it?"
Click to expand...
Click to collapse
so here I am. And maybe it will solve the issue for other users, too.
=== So what does cause those random reboots ===
I don't know exactly. No really, it's difficult to say. Next follows a list of my personal observations on my device. Other devices might behave the same or not (depending on what is wrong with the device).
So this observations might be what will help you to reduce or prevent the random reboots, but they also might not. Enough bla-bla, let's go.
What's not causing it:
xposed
supersu
user apps
Because bare stock ROM installed from KIES will do reboot randomly aswell. It's a mix of kernel (Hacker Kernel gives less than others), build.prop (stock gives less than customized), Google Apps and other bloatware. So picking out a specific issue is difficult.
I also found out that 'userspace' governor and power suspend mode improve stability across different ROMs, so this ROM does set them by default.
Of course devices that have severe hardware damage will still suffer from them, don't expect my ROM to do wonders to broken devices.
=== Why only G920F / G925F ===
Because that's the only model I own, I don't like blind support, but I added G925F kernel upon request.
There are many great multi-device ROMs outwhere to choose from.
=== GApps Vs. microG ===
This ROM allows you to choose between GApps and microG:
1. GApps
Usual Google Apps as you know them, nothing special to do.
2. microG
Open source Google Apps replacement. This ROM requires you to do the following steps prior to be able to use the Play Store:
Code:
- go to Settings > microG and activate:
- main screen:
- device check-in (for cloud messaging)
- cloud messaging (for app push messages)
- UnifiedNlp Settings:
- configure location backends:
- choose Mozilla and grant permissions
- configure address lookup backends:
- choose Nominatim
- reboot device
- enter Play Store and login as usual
- et voila: you're now on the most possible Open Source ROM for S6
(if we don't take the non-fully-functional CM13 into account)
- NOTE: if the Play Store does not show your already installed apps, or if it does
not show your purchased apps as purchased, got to Settings > Apps >
System Apps > Play Store and force stop it, then it'll properly work
- NOTE: if you get random reboots with microG: disable account sync
=== Removed Apps ===
all bloatware crap
=== Added Apps & Features ===
lotsa awesome stuff, namely:
Code:
> [...] means AROMA chooseable
> {...} means user app
Oandbackup (backup/restore apps and data)
AdAway (block annoying ads)
Amaze Filemanager (beta with full MM support)
{Always On: Ambient Clock (always-on clock, battery, notifications)}
Clock (AOSP/DU)
Calculator (AOSP)
{CyanogenMod Screencast (record your screen)}
Etar (Calendar replacement)
F-Droid (App Store for open source apps)
Face Slim (more privacy when facebooking)
Hacker's Keyboard (full fletched PC keyboard)
K-9 Mail (feature rich mail client)
Lightning (fast and small web browser)
Neo Power Menu (Xposed) (fully customizable power menu, supports
hardware reboot
software reboot
shutdown
reboot to recovery
reboot to bootloader
reboot into safe mode
take screenshot
activate torchlight)
NewPipe (YouTube client with download support)
[OpenCamera (awesome camera app)]
QKSMS (open source version)
Settings Editor Xposed Module (modify SecSettings2)
{Termux (best terminal client outwhere)}
Twidere (ultimate Twitter client)
{VLC (media player)}
{XDA Labs}
Xposed Installer (new, materialized)
[Good Lock UI] or [TouchWiz UI]
modified Good Lock brings the following changes compared to original:
rounded recents (for traditional recents)
rounded notifications
centered clock
WiFi icon on left
Cellular icon on left
removed unlock text
quick pulldown from right side
reduced notification panel paddings
optional: version with zero padding chooseable
carrier label on lockscreen on right
statusbar on home and lock screen have the same height
remove annoying notification if no user routine exists
enable System UI Tuner (Settings > Applications)
hide from Launcher (it's accessible from expanded status bar)
short click on status bar battery icon: screen of
long click on status bar battery icon: show power menu
Cyanogen Mod Music Visualization
other minor adjustments
TouchWiz is the original version, except for enabled System UI Tuner
Hacker Kernel v14
[AOSP] or [Samsung] Dialer & Contacts
[Samsung] or [Hacker] or [AOSP/DU] or [Enhanced AOSP] Keyboard
when choosing one of the AOSP Keyboards the Flat Style Keyboard Xposed module will be installed aswell (powerful theming)
[Samsung] or [Open] Camera
[Samsung] or [AOSP/DU] Gallery
choose [Doze] or [No Doze] Framework
[Play] or [Blank] Store (only microG)
Magisk with Auto Magisk
PHH SuperUser
Busybox
GNU Bash Shell
[Trebuchet Launcher] or [TouchWiz Launcher]
The Legend of Zelda tones (It's dangerous to reboot alone)
999kernel init script: anti-random-reboot kernel settings
remount-rw script: remount / and /system read-write
remount-ro script: remount / and /system read-only
testmenu script: access testmenu (allows changing SMSC)
anti-knox build.prop
installer auto-detects whether device is Flat or Edge and installs correct kernel version accordingly
several changes to Settings Application
embed AdAway in connectiviy group
embed Always On in device group
embed Xposed Installer in system group
embed Auto Magisk in system group
embed PHH SuperUser in system group
embed microG in system group (if choosen)
embed Settings Editor in system group
embed Neo Power Menu in system group
hide all those apps from Launcher
enable developer options by default
remove 'Manual' from system group
several Samsung Bloatware (AROMA chooseable):
Samsung Account
Samsung Apps
Samsung Theme Store
Samsung Backup
Samsung Voice
Samsung Voice Note
Samsung TTS
Samsung Fonts
Samsung Edge Features
several build.prop changes (AROMA chooseable):
enable Multi User UI
shorter sensor delay
faster boot/shutdown animation
higher jpeg quality
disable ADB, MTP, USB notification [TouchWiz SystemUI]
less frequent WiFi scans
power saving settings
faster scrolling
improved voice call clarity
disable error checking
disable sending usage data to Google
non-chooseable, built-in changes:
disable FOTA / Sofware Update menu
fully disabled KNOX / TIMA
disabled wake disply on USB plug in/out
added back 'Once' / 'Always' buttons to 'Open With' Dialog
=== Recommended Apps ===
not included because reasons, but still cool:
Easy XKCD (F-Droid)
Overchan (F-Droid)
KeePassDroid (F-Droid)
Play Permissions (Xposed)
Play Store Changelog (Xposed)
=== Notes ===
You need to install Xposed Framework separately (not bundled)
Recommended recovery is arter97's TWRP version 3.0.2
I recommend disabling wifi during standby (that is, if you don't have mobile network active during standby) Play Store auto-updates, that usually improves stability for me
If you installed GApps: I also recommend disabling Google ads and Google app verification in Settings > Apps > Google >> Ads / >> Security (because I don't like those "features", call me a tinfoil head )
Further I recommend doing a TWRP backup after everything is setup and working fine (so that you can revert to a working state any time)
If you're on GNU/Linux, I recommend using gMtp for file transfer. ADB sometimes gives weird file permissions.
=== Issues ===
A List of issues, all minor, but I'll still look into them, if I get some time to do so:
You currently need to manually enable supplied Xposed modules (and restart your device).
Don't create a new routine in Good Lock. This triggers some bug in it that causes uninstallation and leaves you without System UI (black screen, no statusbar and launcher, etc).
? You tell me.
=== Download ===
ROM, Bloatware AddOn, Flashable Modem/Bootloader, Synapse Profile, Archive Folder and Beta Folder
Modified Good Lock, microG (broken-out downloads)
Xposed Framework (wanam) for versions until 5.5.7
Xposed Framework (systemless) for versions 5.6.0 and newer
TWRP (arter97)
Fancy materialized TWRP themes
=== Installation ===
virgin S6:
install TWRP, Modem and Bootloader via Odin
go to recovery (possibly backup stock firmware)
factory reset using TWRP
install ROM
reboot and setup
go to recovery and install Xposed
reboot > profit (?)
rooted S6:
update TWRP
reboot recovery
update Modem and Bootloader
reboot recovery (possibly backup current ROM)
factory reset using TWRP
install ROM
reboot and setup
go to recovery and install Xposed
reboot > profit (?)
=== Update ===
- backup ROM in TWRP
route a) dirty flash
install NanoROM
reboot
route b) proper flash
factory reset in TWRP
install NanoROM
reboot
wait until Setup Wizard pops up
reboot into TWRP
restore /data (only /data) from previously made backup
reboot
=== First Start ===
setup phone normally
[optional] go to Settings > AdAway and activate ad blocking
go to Settings > Xposed Framework > Modules > Enable modules
reboot > now [AdAway and] Xposed Modules are set up and working
Note: it may reboot once because of Super Su (but it doesn't on my device) before first sucessful start. It however will reboot once during setup of Xposed Framework.
=== Future ===
As my goal is to get my S6 properly working, I'm not going to add new features without heavily testing them and I won't rush out any update because of a new change set.
I just wanna use my S6 properly (though I do have a Moto G 2015 aswell, but still).
=== Credits ===
That said this ROM contains work from other developers, that saved me a lot of time, because I could adjust already existing stuff. If you feel like missing from this list, please inform me, I'll add you as soon as possible.
Theese people contain:
ChainFire (SuperSu)
Wanam (Xposed for Sammy)
ambasadii (PureStock ExtraLite)
edgarf28 (XtreStoLite)
Mentalmulso (WETA No Odin)
thehacker911 (Hacker Kernel)
arter97 (arter97 Kernel, TWRP)
Osmosis (Busybox)
3lo0sh (GNU Bash Shell)
alesimula (Trebuchet)
My free time (for being sacrified)
the authors of all included apps
everyone I possibly forgot (you're awesome!)
XDA:DevDB Information
NanoROM, ROM for the Samsung Galaxy S6
Contributors
Setialpha
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Custom Recovery, Lastest Bootloader
Based On: Stock Touchwiz
Version Information
Status: Stable
Current Stable Version: 7.0.2
Stable Release Date: 2017-03-02
Created 2016-04-14
Last Updated 2017-03-02
ChangeLog
7.0 20170212
Code:
7.0 20170212
updated system and apps to DQA7
updated applications:
- Twidere (3.4.27)
updated system components:
- microG (0.2.4-64)
- Magisk (11.1)
- MagiskManager (4.1)
- Play Services (10.2.98.440)
- Play Store (7.5.08.M)
removed applications:
- Nano-Selinux-Enforce Magisk Module
- no longer required with Magisk 11
removed system components:
- Doze vs. NoDoze framework-res
- now only default framework-res
added applications:
- SmartManager
- SHealth
installer changes:
- no longer install SuperUser app
when Magisk is installed (builtin)
other changes:
- show ROM information in SecSettings2
- Good-Lock allow fingerprint after reboot
- remove Favorites from SecSettings2
- remove Emergency Mode from Reboot Menu
bugs fixed:
- GoodLock not working after clean install
6.1.0 20170203
Code:
6.1.0 20170203
updated applications:
- Open Camera (1.36.2)
- Hacker's Keyboard (1.39.3)
- Amaze (3.1.2~beta8)
- Face Slim (3.0.3)
- K9-Mail (5.203)
- NewPipe (0.8.8)
- Twidere (3.4.2)
- Termux (0.46)
- XDA Labs (1.1.1b)
- Kernel Adiutor (0.9.6)
updated system components:
- microG (0.2.4-55)
- Play Services (10.2.97)
- PlayStore (7.4.12.L)
- Magisk (10.2)
& Magisk-Manager (3.1)
- PHH SuperUser (266 or Magisk builtin)
& App (2.0~beta11)
- SuperSU (2.73 SR4)
- NanoROM Kernel Settings Script now also installable
with Magisk + PHH (previoulsy only with SuperSU)
updated xposed modules:
- Flat Style Colored Keyboard (3.1.0)
- Settings Editor (2.10.1)
- Neo Power Menu (1.5.6-3)
added optional components:
- Nano-Magisk-Miitomo
- Magisk module to prevent Miitomo crashes
- Nano-Magisk-Selinux
- Magisk module to enforce Selinux
other changes:
- when Magisk is choosen the NanoROM init scripts
will be installed from the Nano-Magisk-Init module
- when Selecting PHH SuperUser for Magisk, only the
app is installed, as PHH SuperUser is now built-in
to Magisk and auto-installed if SuperSU is not pre-
installed on the ROM
6.0.0 20161206
Code:
6.0.0 20161206
apps:
- update AdAway (3.2)
- update Calculator (5.4.0)
- update F-Droid (0.102)
- update K9-Mail (5.115)
- update Lightning (4.4.1)
- update Open Camera (1.35)
- update Amaze (3.1.2~beta6)
- update Xposed Installer (3.0.1.20161126)
- update Xposed Neo Power Menu (1.5.6)
- update Xposed Settings Editor (2.9.2)
system:
- update Play Store (7.3.07.K)
- update Google Play Services (10.0.84.440)
- update SuperSU (2.78+SR5 system less)
- update SuperSU (2.78+SR5 system mode)
- update Magisk (v9)
- update Magisk Manager (2.5)
- update PHH SuperUser (Magisk 266-r2)
- update Good Lock (24.0.6)
- apply Shakala's patches to systemless SuperSU
- update microG Droid Guard Helper (0.1.0-4)
- update microG Gms Core (0.2.4-30)
- update Hacker Kernel (15.5)
5.9.1 20161030[/code]
Code:
5.9.1 20161030:
apps:
- update XDA Labs (1.0.9.3b)
- update Twidere (3.2.9)
- update Always On: Ambient Clock (2.0.5)
system:
- update SuperSU (2.78+SR2 system less)
- update SuperSU (2.78+SR2 system mode)
- update Magisk (8-mod2)
- update Hacker Kernel (15.20161029)
- only SM-G920FI for now, build for SM-G925FI will come soon,
according to WildfireDEV
- disable NanoROM Kernel Settings Script for arter97 kernel
(default settings break arter97 kernel 22.0, this will be fixed, soon)
installer:
- revert custom fix for Hacker Kernel and arter97 kernel when
using Magisk + PHH SuperUser (fixed in Magisk 8-mod2)
5.9.0a 20161028
Code:
5.9.0a 20161028:
Installer:
- apply Magisk + PHH SuperUser = non-functional root fix
for any kernel
5.9.0 20161026
Code:
5.9.0 20161026:
userapps:
- remove 0andbackup
- remove Cyanogen Screencast
apps:
- update Always On (2.0.3)
- update Play Store (7.1.14.I)
- update Kernel Adiutor (0.9.31.2)
- update SuHide GUI (1.3.0)
- add RootSwitch (1.3.3.2)
system:
- Good Lock NanoViz/ZeroViz:
- allow Fingerprint unlock after reboot
- SecSettings2:
- remove quick settings
- fix Do Not Disturb
- add LED indicator settings
- remove AdAway, AlwaysOn, Xposed Installer, Magisk Manager,
SuperSU, SuHide, Neo Power Menu, Settings Editor, microG
from System Settings, instead they show up in Launcher again
- add optional PHH SuperUser (259-magisk)
- add optional PHH SuperUser (259)
- install SuperUser (2.0~beta9) for PHH SuperUser
- add version of NanoROM Kernel Settings Script for Magisk
- add version of NanoROM init scripts for Magisk
- update Hacker Kernel for SM-G920FI (15)
- no new version for SM-G925FI available
- fix Hacker Kernel + Magisk + PHH SuperUser (Magisk) not getting
root access (Hacker Kernel's ramdisk is modified in a way that
Magisk believes SuperSU is installed, even if PHH is installed,
thus this combination will lead to no root, the fix is to prevent
Magisk from doing any SuperSU related tasks for Hacker Kernel, if
PHH SuperUser is choosen)
installer:
- much more flexible package selection
- new option for GApps: don't install any
- new option for Kernel Settings Manager: don't install any
- new option for Super User: PHH (magisk), PHH (system)
- new option for Kernel: don't install kernel (keep current)
[read: if you want arter97 kernel, install it first, then NanoROM]
- the follwing apps are now optional (aroma-chooseable):
- AdAway
- Always On: Ambient Clock
- Amaze (File Manager)
- Calculator
- Clock
- Etar (Calendar)
- FaceSlim
- FDroid
- K9Mail
- Lightning
- NewPipe
- QKSMS
- Twidere
- the follwing Xposed stuff is now optional (aroma-chooseable):
- Xposed Installer
- Xposed Neo Power Menu
- Xposed Flat Style Colored Keyboard
- Xposed Settings Editor
- add option to install RootSwitch
- new defaults:
- install PHH SuperUser (Magisk)
- install Magisk
- don't install SuHide
- minor string improvements
- Note: PHH SuperUser (Magisk) is only installed, if Magisk is, too
- Note: RootSwitch and SuHide are only installed for SuperSU (systemless)
- Note: the NanoROM Kernel Settings Script currently only works with SuperSU
(systemmode), SuperSU (systemless) or with PHH SuperUser (Magisk),
it does not work with PHH Super User (system)
- Note: same applies to NanoROM init scripts (the reason is: PHH SuperUser
does not support init scripts, while SuperSU and Magisk do)
5.8.0 20161021
Code:
5.8.0 20161021:
userapps:
- update XDA Labs (1.0.9.2b)
apps:
- remove AOSP/DU Gallery
- add LeafPic Gallery (0.6~beta1)
- update Xposed Settings Editor (2.6)
- update Xposed Neo Power Menu (1.5.5-4)
- update Xposed Installer (3.0~alpha4~20161016)
- add Sony Xperia Keyboard (7.3.A.0.54)
- update Kernel Adiutor (0.9.31.1)
- update Play Store (7.1.12.I)
- update K-9 Mail (5.114)
- update Twidere (3.2.8)
system:
- add optional SuperSU System Mode (2.78S+R1)
- update Magisk (8)
- update Magisk Manager (2.1)
- update Samsung Keyboard
- update TouchWiz Launcher
- update Samsung Gallery
- update WallpaperCropper
- update WebView
- add Hacker Kernel (14)
- Hacker Kernel development was restarted
- slightly change default settings for Hacker Kernel
bloatware:
- merge bloatware addon into main ROM
- install Samsung TTS by default
- update Galaxy Apps
- update Samsung TTS
- update SVoice
installer:
- install microG by default
- remove microG/BlankStore combo
- make Sony Xperia Keyboard optional
- choose between system mode, system less SuperSU
- add option to not install SuperSU at all
- choose between stock kernel and hacker kernel
- string changes
Previous Releases
Code:
5.7.1 20161012:
system:
- update Google Play Services (9.8.77.440)
- fix Magisk Manager not properly working
- if it still does not properly work, when updating
from NanoROM 5.7.0, do the following:
- clean cache and dalvik/art cache
- pull down once in Main, Modules and
Download pages of Magisk Manager
- add SuHide GUI (1.2.0)
- integrate into SecSettings
- hide from Launcher
- in SecSettings the entry for Magisk Manager
was falsely labelled Auto Magisk (fixed)
- update Samsung Stock Kernel (3.10.61)
- switch to official microG DroidGuard build (0.1.0-3)
- fixed DroidGuard library not found issue
- SafetyNet now works with microG (yay!!!)
installer:
- add optional Plasma Bootanimation
- make Google Backup optional
- add optional extra Fonts (all-in-one)
- Apple Mint
- Choco
- Cool
- Rose
- Samsung One
- Samsung Sans
- Tinker
5.7.0 20161011
Code:
5.7.0 20161011:
userapps:
- update XDA Labs (1.0.8.9b)
apps:
- update F-Droid (0.102~alpha1)
- update Amaze (3.1.2~beta2)
- update K9-Mail (5.113)
- update Open Camera (1.34)
- update Xposed Installer (3.0~alpha4~20161008)
- update Neo Power Menu (1.5.5-2)
system:
- add Magisk Manager (2.0)
- update Settings App accordingly
- update microG (0.2.4-22-gcb356d2-dirty)
- add microG DroidGuard (0.1.0-3-gbb232f2-dirty)
- update Good Lock (24.0.15)
- update Play Store (7.1.11.H)
- update Google Play Services (9.8.75.440)
- add SuperSU 2.78-SR1
- add SuHide (0.55)
- update Magisk (7)
- remove AutoMagisk
- make NanoROM init scripts su.d again
- remove Hacker Kernel
- add Stock Samsung Kernel
- support 920F 920FD 925F
- support (untested) 920I 925I
- disable ro.securestorage.support in build.prop
- else Stock Samsung Kernel will not remember WiFi
passwords and WiFi startup will take ages
installer:
- install GApps (7)by default
- install AOSP dialer by default
- enable Call and SMS block menu by default
- make SuHide optional
- make Magisk optional
- install Magisk Manager when Magisk was choosen
- minor string fixes
5.6.1 20160928
Code:
5.6.1 20160928:
userapps:
- update XDA Labs (1.0.8.6b)
apps:
- update Neo Power Menu (1.5.5-1)
- update Amaze (3.1.0 beta2)
- update NewPipe (0.8.5)
system:
- update Auto Magisk (1.1)
- update Play Store (7.0.16.H)
- update Good Lock (24.0.14)
5.6.0 20160919
Code:
5.6.0 20160919:
userapps:
- update Termux (0.42)
apps:
- remove Xposed Boot Manager
- update Twidere (3.2.7)
- update AOSP/DU Gallery (1.1)
- update Xposed Installer (3.0~alpha4-20160914)
system:
- remove SuperSU
- add Magisk (6)
- with Auto Magisk (1.0)
- hide from Launcher
- add PHH SuperUser for Magisk (17)
- with Super User app
- hide from Launcher
- make NanoROM startup scripts a Magisk Service
- add native Fake Sign support to framework.jar
- primarly for microG
- fixes microG being incompatible with Magisk/Systemless Xposed
as microG now no longer needs Fake GApps Xposed Module to work
- remove Fake GApps Xposed Module
- System Settings:
- remove Settings > Apps > Boot Manager shortcut
- remove Settings > System > SuperSU shortcut
- move Settings > Apps > Xposed Framework shortcut to
Settings > System Xposed Framework
- add Settings > System > PHH Super User shortcut
- add Settings > System > Auto Magisk shortcut
- update Google Play Services (9.6.83-440)
- minor update to KERNEL doc
NOTE 1: a clean flash is mandatory when coming from a
different ROM or a previous version of NanoROM
NOTE 2: use systemless Xposed for Magisk with this ROM
5.5.7 20160910
Code:
5.5.7 20160910:
userapps:
- update XDA Labs (1.0.8.5b)
- update Termux (0.41)
apps:
- update QKSMS (2.7.3)
- update Twidere (3.2.5)
- update Etar (1.0.6)
- update Xposed Neo Power Menu (1.5.4-3)
- update Xposed Settings Editor (2.4)
- update Always On: Ambient Clock (1.5.2)
- update Open Camera (1.33)
system:
- replace Kernel Adiutor Mod by shiny new Kernel Adiutor
- update Play Store (7.0.12.H)
- update Google Play Services (9.6.78-440)
- update SuperSU (2.78-system_mode)
5.5.6 20160830
Code:
5.5.6 20160830:
apps:
- update Enhanced AOSP Keyboard to 1.0.4
system:
- updated Good Lock to 24.0.12
5.5.5. 20160828
Code:
5.5.5 20160828:
userapps:
- update XDA Labs (1.0.8.3b)
- update VLC (2.0.6-12000627)
- update Termux (0.39)
apps:
- update F-Droid (0.100~alpha6)
- update QKSMS (2.7.1)
- update Twidere (3.2.4)
- update Face Slim (2.9.0)
- update Xposed Neo Power Menu (1.5.4-1)
- update Xposed Flat Style Colored Keyboard (2.6.1)
- update Xposed Settings Editor (2.2)
- update Xposed Installer (3.0~alpha4-20160805)
system:
- update GNU Bash to 4.3.46
- update microG 0.2.4-9-g214120a
- support Dual SIM variants
5.5.4 20160802
Code:
5.5.4 20160802:
apps:
- update F-Droid (0.101~alpha3)
- update Open Camera (1.32.1)
- update Neo Power Menu (1.5.2-2)
- update Settings Editor (2,1)
- update Xposed Installer (3.0~alpha4-20160731)
userapps:
- update VLC (2.0.5-12000507-arm64)
- update XDA Labs (1.0.8b)
- update Termux (0.37)
system:
- update microG (0.2.4-3-g47a61d6)
- this version is compatible with Pokemon GO 0.31
- update Google Play Services (9.4.52-440)
- update Google Play Store (6.9.15.G)
5.5.3 20160721
Code:
5.5.3 20160721:
apps:
- update Neo Power Menu (1.5.2-1)
- update Open Camera (1.32)
system:
- fix Settings Crash when trying to enable Fingerprint Unlock
NOTE: if it's still not working after flashing this update,
you'll need to do a factory reset and flash this version
again, sorry for the trouble caused.
5.5.2 20160720
Code:
5.5.2 20160720:
apps:
- update Kernel Adiutor Mod (v15)
- update VLC (2.0.4-12000407-arm64)
- update Xposed Installer (3.0~alpha4-20160715)
- update T-UI (4.5)
system:
- update microG (0.2.4)
- fix crash when tapping on number in callog (AOSP Dialer)
5.5.1 20160714
Code:
5.5.1 20160714:
apps:
- update Twidere (3.1.12)
- update QKSMS (2.7.0)
- update Play Store (6.8.22.F)
- update Xposed Settings Editor (1.9)
- update Amaze (3.1.0 beta 1)
system:
- update microG (0.2.3-6-gbee7bc9)
- Note: this release fixes the bug that made
Pokemon Go not get GPS fix with microG
5.5.0 20160709
Code:
5.5.0 20160709:
apps:
- update F-Droid (0.101~alpha2)
- update Face Slim (2.8.0)
- update Twidere (3.1.11)
- update VLC (2.0.3-12000304-arm64)
system:
- fix rotation bug with TouchWiz System UI
- update Good Lock (24.0.11)
5.4.5 20160706
Code:
5.4.5 20160706:
apps:
- update Play Store (6.8.20.F)
system:
- fix microG Gms Core not properly working
- fix Super Su sometimes didn't work when dirty flashing
from 5.4.3 to 5.4.4 (clean flash properly worked)
- integrate Music Visualization into SecSettings2
- hide Music Visualization from Launcher
5.4.4 20160705
Code:
5.4.4 20160705:
apps:
- update Amaze (3.1.0)
- update VLC (2.0.2-12000217-arm64)
- update Open Camera (1.31)
- update F-Droid (0.101~alpha1)
- update QKSMS (2.6.3)
- update AlwaysOn: Ambient Clock (1.4.4)
- update Xposed Settings Editor (1.8a)
- update Xposed Installer (3.0~alpha4-20160623)
- update Xposed Neo Power Menu (1.5.1)
- update microG Gms Core (0.2.3-3-g30e6dba)
- update AdAway (3.1.2)
installer:
- choose between custom kernel settings script and
Kernel Adiutor Mod [v14]
- install framework without Doze by default
- install Open Camera by default
- don't install Hacker Keyboard by default
system:
- update system mode Super SU (2.76)
- update Enhanced AOSP Keboard (1.0.3)
- remove AOSP/DU Keyboard (we have Enhanced AOSP Keyboard)
- when using my custom kernel settings script don't overclock
the CPU to 2.4/1.8 GHz, instead stay at safe 2.1/1.5 GHz,
increase lowest frequency from 200/200 MHz to 400/200 MHz
5.4.3 20160620
Code:
5.4.3 20160620:
apps:
- update Amaze (3.0.2~beta6)
- update T-UI (4.4.b8)
- update Google Play Services (9.2.56-440)
- update VLC (2.0.0-12000044)
system:
- fix PlayStore crash when using GApps
- remove lock screen strings from Good Lock
5.4.2 20160614
Code:
5.4.2 20160614:
apps:
- update Amaze (3.0~beta5)
- update Face Slim (2.6.0)
- update NewPipe (0.8)
- update Xposed Neo Power Menu (1.5.0)
system:
- update Good Lock (24.0.10), changes by Samsung since 24.0.9:
- Sync and Ultra Power Save Mode quick tile
- multi window badge in notifications
- silent with volume down key
- backup and restore settings
- feedback option
5.4.1 20160613
Code:
5.4.1 20160613:
apps:
- update T-UI (4.3.b6)
- update Open Camera (1.30.1)
- update F-Droid (0.100)
- update Trebuchet (6.0.1.6)
system:
- remove Good-Lock-Viz instead both Good-Lock-Nano and Good-Lock-Zero now contain both the Cyanogen Mod Visualization
- fixed Good-Lock-Zero not having Zero Padding
5.4.0 20160603
Code:
5.4.0 20160603:
userapps:
- update VLC (2.0.0)
apps:
- update Xposed Installer (3.0-alpha4-20160529)
- update Flat Style Keyboard (2.6.0)
- update Play Store (6.7.13.E)
- update QKSMS (2.6.1)
- update Open Camera (1.30)
- update T-UI (4.2.1.b6)
- update AOSP Gallery (DU-20160515)
- update AOSP Dialer (DU-20160515)
- update AOSP Contacts (DU-20160515)
- update microG Gms Core (0.2.3-1-gec93cc4)
system:
- add new Good Lock variant:
- with Cyanogen Mod Music Visualizer
- install Visualizer Settings when choosen
- NOTE: if it's not working for you, remove the following file:
/data/system/users/0/runtime-permissions.xml
and reboot your phone
5.3.1 20160528
Code:
apps:
- update F-Droid (0.100-alpha8)
userapps:
- update VLC (1.9.12)
system:
- update Good Lock (24.0.9)
- new features by Samsung:
- more toggles under advanced settings
- colorable clock under lock screen settings
- interchangeable colors in routine settings
- ?
- new changes in modded version
- increase notification count to 7
- available as stock, modded and zero variants in installer
5.3.0 20160517
Code:
apps:
- update Twidere (3.1.7)
system:
- update microG Play Services Core (0.2.2-9-20160515)
- update microG Framework Proxy (0.2.2-9-20160515)
- update Play Store (6.7.07.E)
- update Google Play Services (9.0.83.440)
- add T-UI as optional Launcher
installer:
- option to install T-UI Launcher
- make all Launchers installable at once
- make all user apps optional
- Cyanogen Screencast
- Oandbackup
- Termux [default]
- VLC [default]
- XDA Labs [default]
5.2.0 20160515
Code:
userapps:
- update XDA Labs (1.0.6.1b)
apps:
- update F-Droid (0.100-alpha7)
- update Face Slim (2.5.2)
- update Xposed Settings Editor (1.6)
- update Enhanced-AOSP Keyboard (1.0.2)
system:
- update SuperSU (2.72, system mode)
- Good Lock / Good Lock Zero:
- fix Doze not working
- framework-res Doze / No Doze:
- allow all rotation modes
installer:
- add option to install unmodified Good Lock
5.1.1 20160509
Code:
apps:
- update OpenCamera (1.2.9)
- update Etar (1.0.4)
system:
- update Good Lock (24.0.8)
- all my modifications are applied aswell
- including ZeroPadding version
- further improve busybox installation script
- further improve 999kernel script
- new testmenu script paramters:
- 'testmenu kernel-disable' will disable 999kernel script
- 'testmenu kernel-enable' will enable 999kernel script
- 'testmenu kernel-status' will show whether 999kernel is enabled or not
installer:
- minor improvements
- when backing up and restoring kernel configuration during installation, do not just backup and restore custom.settings, but also disabled.settings
5.1 20160508
Code:
misc:
- move Samsung Bloatware into own package
apps:
- update Neo Power Menu (1.4.2)
- add Flat Style Colored Keyboard Xposed module
(if either AOSP or Enhanced-AOSP Keyboard is installed)
- add Settings Editor Xposed module
(allows you to modify SecSettings2, hide from Launcher)
userapps:
- updated XDA Labs (1.0.5.1b)
system:
- arter97 kernel: removed (I overlooked that arter97 prohibits redistribution)
- forgot to update /system/vendor to PDP
- 999kernel: if /etc/kernel/disabled.settings exists, don't do anything
- microG:
- fix libvtm-jni / libvtm-android not beeing available to apps
- Good Lock:
- enable System UI Tuner (Settings > Applications > System UI Tuner)
- hide from Launcher (it's accessible from expanded Notification Panel)
- short click on status bar battery icon: turn display off
- long click on status bar battery icon: show power menu
- Good Lock ZeroPadding:
- Good Lock with no padding (indention) in notification drawer (optional)
- else all changes like Good Lock
- TouchWiz:
- enable System UI Tuner (Settings > Applications > System UI Tuner)
- SecSettings2:
- show Settings Editor in system group
- show proper icon for Always On
- new testmenu script parameters:
- 'testmenu test' will open TestSettings (SMS Center and stuff)
- 'testmenu tuner' will open System UI Tuner (use with caution)
installer:
- add option to install Enhanced AOSP Keyboard [default]
(AOSP Keyboard with number row)
- add option to install Good Lock with Zero Padding
5.0.1 20160505
Code:
userapps:
- update XDA Labs (1.0.5b)
system:
- Good-Lock.apk:
- remove annoying notification when no user routine is set up
- update arter97 kernel to v14~alpha4~misc-gov3
installer:
- new option to choose wether to install framework-res
- with Doze enabled [default]
- with Doze disabled
5.0 20160504
Code:
misc:
- add KERNEL doc
apps:
- update F-Droid (0.100-alpha6)
- update Etar (1.0.3)
- update Face Slim (2.5.0)
- make Always On: Ambient Clock a system app
- update to 1.4.3
userapp:
- remove Screen Notifications
system:
- update to PDP firmware
- framework.jar changes:
- add Always/Once buttons to "Open With" dialog
- framework-res.apk changes:
- enable Doze
- services.jar changes:
- disable wake up on USB un/plug
- rename items in stock reboot menu:
- Reboot > Hardware Reboot
- Hot Reboot > Software Reboot
- Download > ODIN Mode
- Good-Lock.apk:
- rounded recents (traditional recents)
- rounded notifications
- center clock
- WiFi icon on left
- Cellular icon on left
- remove unlock text
- quick pulldown on right side
- reduce notification panel paddings
- move carrier label to right in lockscreen
- make statusbar on homescreen and lockscreen same height
- other minor adjustments
- SecSettings2.apk:
- add AdAway in connectivity group
- add Always On in device group
- add Xposed Framework in device group
- add SuperSU in system group
- add microG in system group (if installed)
- add Neo Power Menu in system group
- add Boot Manager to device group
- enable Developer Options by default
- remove Manual in system group
- hide those apps from launcher
installer:
- improve build.prop settings mechanism
- make all CSC features AROMA chooseable
(except disabled Software Update menu):
- show camera (Samsung Camera) shutter sound option
- show NFC icon in status bar when on
- show call recording button
- show block SMS and Call menu [default]
- recents app protection (TouchWiz)
- extra quick toggles (TouchWiz) [default]
- show data usage in notification panel (TouchWiz)
- show call button in call list (Samsung Dialer)
Kernel Stuffz
=== Kernel Settings ===
For NanoROM you don't need tools like Synapse or Kernel Adiutor to modify kernel settings. It comes with it's own script to manage kernel settings.
/system/su.d/999kernel
=== Configuration Files ===
By default the script has three pre-set configuration files:
/system/etc/kernel/arter97.settings arter97 kernel/system/etc/kernel/hacker.settings Hacker Kernel/system/etc/kernel/stock.settings Samsung Kernel
depending on your installed kernel the correct pre-set is loaded. Your own configuration needs to go to
/system/etc/kernel/custom.settings User Settings
it will always be loaded in favour of the pre-set configurations.
If you don't want the script to do anything, create an empty file:
/system/etc/kernel/disabled.settings
and reboot, then the kernel default values will be used. Remove that file and reboot to let the script do it's work again.
=== File Format ===
The format of the configuration file is simple
Code:
option=value
for non-array values and
Code:
option=( key1 value1
key2 value2
... ... )
for array values (currently only the voltage table is an array).
=== Possible Options ===
The script covers most relevant options you might want to tweak. Note: even if the installed kernel does not support all settings, your configuration file must include all options, to ensure the script is properly working.
Thus I recommended copying over one of the pre-set configuration files and modify it to your needs. Next follows a list of possible configuration options.
Code:
1] cpu_governor
default values: arter97 userspace
Hacker userspace
stock userspace
use the following command to check available governors:
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors
2] io_scheduler
default values: arter97 fiops
Hacker sioplus
stock cfq
use the following command to check available schedulers:
cat /sys/block/sda/queue/scheduler
3] io_readahead
default values: arter97 2048
Hacker 2048
stock 2048
4] tcp_congestion
default values: arter97 westwood
Hacker reno
stock cubic
5] power_suspend_mode
default values: arter97 1 [userspace] {0, 3 unsupported}
Hacker 1 [userspace]
stock 1 [userspace]
Note: 0 [autosleep]
1 [userspace]
2 [lcd]
3 [hybrid]
6] power_suspend_state
default values: arter97 1 [on]
Hacker 1 [on]
stock 1 [on]
Note: 1 [on] only possible when power_suspend_mode is 1 [userspace],
else it'll always be 0 [off]
7] gentle_fair_sleepers
default values: arter97 0 [off] {unsupported}
Hacker 0 [off]
stock 0 [off] {?}
8] big_max_freq
default values: arter97 2400000 [2.4 GHz]
Hacker 2400000 [2.4 GHz]
stock 2400000 [2.4 GHz]
use the following command to get the clock speeds for big core:
cat /sys/devices/system/cpu/cpufreq/mp-cpufreq/cluster1_freq_table
9] big_min_freq
default values: arter97 200000 [200 MHz]
Hacker 200000 [200 MHz]
stock 200000 [200 MHz]
use the following command to get the clock speeds for big core:
cat /sys/devices/system/cpu/cpufreq/mp-cpufreq/cluster1_freq_table
10] low_max_freq
default values: arter97 1800000 [1.8 GHz]
Hacker 1800000 [1.8 GHz]
stock 1800000 [1.8 GHz]
use the following command to get the clock speeds for low core:
cat /sys/devices/system/cpu/cpufreq/mp-cpufreq/cluster0_freq_table
11] low_min_freq
default values: arter97 200000 [200 MHz]
Hacker 200000 [200 MHz]
stock 200000 [200 MHz]
use the following command to get the clock speeds for low core:
cat /sys/devices/system/cpu/cpufreq/mp-cpufreq/cluster0_freq_table
12] arch_power
default values: arter97 0 [off] {unsupported}
Hacker 1 [on]
stock 0 [off] {?}
Note: architecture specific power saving options.
13] laptop_mode
default values: arter97 0 [off] {unsupported}
Hacker 0 [off]
stock 0 [off] {?}
14] power_efficient
default values: arter97 N [off] {unsupported}
Hacker Y [on]
stock N [off] {?}
Note: power efficient work queues
15] kernel_samepage
default values: arter97 0 [off]
Hacker 0 [off]
stock 0 [off]
Note: kernel samepage merging reduces unrequired RAM usage,
at slightly less battery life
16] kernel_samepage_sleep
default values: arter97 100 [ms]
Hacker 100 [ms]
stock 100 [ms]
Note: KSM scan intervall in milliseconds
17] kernel_samepage_cpu
default values: arter97 95 [%]
Hacker 95 [%]
stock 95 [%]
Note: KSM maximum cpu usage
18] swappiness
default values: arter97 50 [%]
Hacker 50 [%]
stock 50 [%]
Note: higher value = kernel puts off unused objects from RAM faster
19] dirty_writeback
default values: arter97 0 [off] {?}
Hacker 1 [on]
stock 0 [off] {?}
Note: delays writeback for faster operation, slightly higher chance
of possible data loss when phone is crashing while writing data
20] adb_over_wifi
default values: arter97 -1 [off]
Hacker -1 [off]
stock -1 [off] {?}
Note: default for [on] is 5555 (equals to port)
21] low_volt_table
default value (1800000:500000
1704000:625000
1600000:500000
1500000:637500
1400000:975000
1296000:925000
1200000:887500
1104000:850000
1000000:812500
900000:775000
800000:737500
700000:706250
600000:681250
500000:656250
400000:631250
300000:625000
200000:625000) [all kernels]
Note: de/increment by multiples of 6250, eg: 625000 > 631250 > 637500 > ...
Note: changing this array is only recommended if you know what you're
doing. Wrong handling of this might result in data loss, unstable
operating system or if you overdo it: hardware damage.
22] big_volt_table
default value: (2400000:1062500
2304000:1062500
2200000:1062500
2100000:1050000
2000000:1012500
1896000:975000
1800000:937500
1704000:906250
1600000:875000
1500000:843750
1400000:818750
1300000:793750
1200000:775000
1100000:750000
1000000:725000
900000:706250
800000:687500
700000:668750
600000:650000
500000:650000
400000:650000
300000:650000
200000:625000) [all kernels]
Note: de/increment by multiples of 6250, eg: 625000 > 631250 > 637500 > ...
Note: changing this array is only recommended if you know what you're
doing. Wrong handling of this might result in data loss, unstable
operating system or if you overdo it: hardware damage.
Hi
Welcome to DEV
Sent from my SM-G925F using Tapatalk
Welcome to new dev, allways good if new ones arrive :good::good:
It has deleted the Samsung Apps ? I need Samsung account for Contacts Sync Saved .
Xumy87 said:
It has deleted the Samsung Apps ? I need Samsung account for Contacts Sync Saved .
Click to expand...
Click to collapse
I'll provide a flashable addon later today (including theme store)
Gesendet von meinem SM-G920F mit Tapatalk
Setialpha said:
@UlmGS6 you may want to give it a try, as you go the same issue...?
Click to expand...
Click to collapse
Hi, congrats for the ROM! I'm not so sure if I can give it a go, because I have the S6 Edge version unfortunately..
Thanks anyway!
Confirmed working on s6 edge..please flashed 925f kernel and supersu2.71 and it works like a charm!!nice work dev
Sent from my SM-G920F using Tapatalk
Moe9269 said:
Confirmed working on s6 edge..please flashed 925f kernel and it works like a charm!!nice work dev
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
Nice! I will definitely try it then and keep you updated!
What is kernel have you used for the rom?
Sent from my SM-G920F using Tapatalk
UlmGS6 said:
Nice! I will definitely try it then and keep you updated!
Click to expand...
Click to collapse
I'll push an update later today, because I noticed my Synapse profile is not auto applied. It changes some settings that improve stability on buggy devices.
Depending on my time I may either provide edge hacker kernel as separate zip or digg into aroma.
Also on todo list:
- auto enable xposed mods
- auto grant root for Synapse
- update f-droid
Gesendet von meinem SM-G920F mit Tapatalk
Moe9269 said:
What is kernel have you used for the rom?
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
Hacker kernel
Gesendet von meinem SM-G920F mit Tapatalk
Hello!
My 920F is definitely doing random reboots and random freezes.
I will try your ROM tonight, I think, and I hope that this is going to solve my problems.
But I also have a question: Why is my 930F restarting in the last 5 days?
I mean, I ' ve installed a ROM from XDA a month ago and it worked really fine until 5 day ago?
Is there any way to find out why it keeps restarting and freezing? Maybe a log?
CRiSTiANVASiLE said:
Hello!
My 920F is definitely doing random reboots and random freezes.
I will try your ROM tonight, I think, and I hope that this is going to solve my problems.
But I also have a question: Why is my 930F restarting in the last 5 days?
I mean, I ' ve installed a ROM from XDA a month ago and it worked really fine until 5 day ago?
Is there any way to find out why it keeps restarting and freezing? Maybe a log?
Click to expand...
Click to collapse
Did you try a factory reset? A logcat might be helpful, but if it's a hardwate issue, it won't show anything.
Gesendet von meinem SM-G920F mit Tapatalk
Hi setialpha,
great to see a german dev here.
I will test your new rom asap
kind regards
Want to try this rom. Update all ready uploaded?
Sent from my SM-G920F using XDA Premium HD app
marcel112 said:
Want to try this rom. Update all ready uploaded?
Sent from my SM-G920F using XDA Premium HD app
Click to expand...
Click to collapse
Not yet, testing still in progress, a small preview of what will be changed (not final):
Code:
apps:
- update F-Droid (0.100-alpha3)
- update K-9 Mail (5.010)
installer:
- auto detect whether device is zeroflte (SM-920F) or zerolte (SM-G925F) and install correct Hacker Kernel version accordingly.
- fix busybox installation
- fix TWRP progressbar
system:
- remove test applications
- show NanoROM version in software info
- by default make the home screens empty
- by default apps are now sorted alphabeticaly
- other minor tweaks
there are still a few more possible changes, but I'm not sure yet whether they'll come with the next update or the one after.
my phoe suddenly freezed and rebooted with a pink led is this the plod? i had no issues since months but now?
nadejo said:
my phoe suddenly freezed and rebooted with a pink led is this the plod? i had no issues since months but now?
Click to expand...
Click to collapse
Yes.
On other note:
Hmm... Update takes a bit longer, still need to sort out some things. In the download folder you'll find my Synapse profile. Using this on a buggy device greatly improves stability.
Anyone else having the issue that Synapse does not see the Profile after putting it into /sdcard/Synapse/saved_profiles?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PROJECT-X [CERBERUS]
AUDIOPHILE | AROMA
DISCLAIMER | READ
I am not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. You do so at your own risk and take the responsibility upon yourself.
"This is a user friendly thread. All feature requests will be heard and considered. I am not against anything that doesn't stray too far away from the original idea of the ROM! Helping one another is also encouraged! Please be respectful and you will always be treated the same way, we are all here for a good experience."
ABOUT | INSTRUCTION
This here is my personal setup and thought i'd share. Usually i test extensively before releasing to public, but if you do find something detrimental to the usage of your device that is either Force Closing or simply not working, let me know and i will in turn inform whether that is something i will tend to.
Project-X is made for Music geeks like me, its main focus is stability and Audio. It is Based off latest firmware currently, and will always be using the most up to date firmware base. It aims to bring stability and features to your device, while keeping Google's vision in line and not straying too far away from that. If you are looking for a stable ROM with true tested features and minimal bugs, then this is the place to be.
FEATURES | AROMA
Code:
[B]General[/B]
– Based on CM 13 Android 6.0.1
– 100% custom Aroma installer
– Rooted with SuperSU v2.78-SR1
– Zipaligned where appropriate
– Fully deodexed the ROM
– All apps 100% up-to-date at the time of release
– Debloated(Removed unecessary files)
– Busybox 1.24.2 already installed
– Added Init.d support
– Added Addon.d support
– Fully Working VoLTE
– Bug fix’s and stability improvements
– UI Improvements
– Scrolling cache improvements
– Added data/app support
– LSpeed mod option
– Xposed Installer(Materialized)
– ViPER4Android kernels and profiles
[B]Sound Mods [/B]
– Meizu™ M3 Note MaxxAudio™ sound libraries and effects
– Huawei™ MediaPad M2 sound libraries, effects
– Harman & Kardon™, and DTS™ *Wiko™ Robby Auro™ sound library and effect
– Nextbit™ Robin Arkamys™ sound library and effect
– Vivo™ V3 Max BBE™ Sonic Maximizer library and effect.
– LG™ V20 sound libraries and effects
– Vivo™ V3 Max Advanced Digital Signal Processing modules:
– AudioSphere
– DolbyMobile
– DolbySurround
– DTS HPX
– SRS TruMedia
– LG™ V20 apt-x and apt-xhd codecs
– Sony™ LDAC™ Bluetooth™ codec
– Sony™ Xperia sound libraries
– Vivo™ V3 Max Qualcomm™ sound libraries and effects
– Pure Audio Engine 2.0-Hi Studio
[B]ViPER4Android drivers [/B]
– 2.3.4.0 audio driver
– 2.4.0.1 audio driver
– 2.5.0.5 audio driver
[B]Audio Mods [/B]
– AM3D Zirene
– Dolby Atmos
– Sony Walkman
[B]Camera Mods[/B]
– Snapdragon camera
– Camera2 camera
– Google camera
[B]Kernel Adiutor[/B]
– Original kernel adiutor
– Modded kernel adiutor
[B]Launcher[/B]
– Pixel Launcher
– Trebuchet Launcher
– Launcher3 Launcher
– Google Now Launcher
[B]File Manager[/B]
– MiXplorer
– ES File Explorer
– MK File Manager
– CM File Manager
[B]Ad Blocking[/B]
– Ad-Away
– Mother of all Ad Blocking
[B]Browser[/B]
– Chromium browser
– Gello browser
– Stock browser
[B]Kernel[/B]
– Jerrica kernel
– Late Autumn kernel
SETUP FILES | DOWNLOAD
https://projectxrom.wordpress.com/download/
INSTALLING | FLASHING
Which path do I choose? Clean install or dirty flash?
Dirty flash: If you are already on Project-X. Please check the update post linked about though. This keeps your apps and their data intact.
Clean install: When you have problems with dirty flashing, when coming from another custom ROM or stock Android, OR when required.
How to dirty flash:
1. Download the latest Project-X zip onto your phone.
2. Boot into TWRP and make a backup (remove any lock screen security before this, optional but HIGHLY recommended).
3. Wipe cache and dalvik cache (optional).
4. Flash Project-X zip.
5. Reboot and profit.
How to clean install:
1. Download the latest Project-X zip, latest GApps (recommended ones linked, use others at your own risk) onto your phone.
2. Backup any important data.
3. Boot into TWRP and make a backup (remove any lock screen security before this, optional but HIGHLY recommended).
4. Wipe system, data, cache, and dalvik cache in Wipe > Advanced Wipe.
5. Flash Project-X zip.
6. Flash GApps zip.
7. Reboot and profit.
SUPPORT | DONATE
If you want to donate a few bucks for the work we're doing in our freetime:
PayPal - https://www.paypal.me/AnandMore
You can't donate? No problem it's not necessary, just support me by following me on these platforms:
YouTube - https://www.youtube.com/c/TechGeekChannel
WordPress - https://anandmoreblog.wordpress.com/
Facebook - https://www.facebook.com/techgeek.as/
PUBLIC LICENSE | SOURCES
CM sources: https://github.com/CyanogenMod
Device tree: https://github.com/CyanogenMod/android_device_wingtech_wt88047
Kernel source: https://github.com/CyanogenMod/android_kernel_wingtech_msm8916
Vendor blobs: https://github.com/TheMuppets/proprietary_vendor_wingtech
THANKS | CREDITS
@Chainfire for SuperSU and some installation scripts.
@viper520 , @zhuhang for ViPER4Android.
@Paget96 for LSpeed mod - XDA thread here.
@Jeeko for Pure Audio Engine 2.0 - XDA thread here.
@A.R.I.S.E. Sound Systems - A.R.I.S.E Audio mod - XDA thread here.
@BSDgeek_Jake for ADBlocking Mod - XDA thread here.
@premaca, @iamsubhranil for their awesome kernels.
XDA:DevDB Information
Project-X, ROM for the Xiaomi Redmi 2
Contributors
anandmore
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: Cyanogenmod 13
Version Information
Status: Stable
Current Stable Version: 1.3
Stable Release Date: 2016-10-26
Created 2016-10-01
Last Updated 2016-10-25
CONFIGURING | VIPER4ANDROID
"If on Marshmallow, ensure ViPER4Android's Storage Permissions are enabled through its App Info page.
Stock audio effects, other than MusicFX, will likely need to be disabled if not deleted during the installation."
Open ViPER4Android
Menu > Settings > Show Notification (block if desired by long pressing notification)
Menu > UI Setting > Expert (not needed in V4A 2.5.0.5)
Menu > Save Effect Profile > New Effect Profile > "Stock" (this will help you find your working v4a directory)
Begin playing audio file
Open v4a
Uncheck Enable v4a
Check Enable v4a
ViPER4Android™ > Enabled
ExtremeBeats™ Perfection EQ Preset > 3.5, 4.5, 5.0, 3.5, 1.5, 1.0, 3.5, 4.5, 5.0, 3.5 (Enabled only on Speaker)
Convolver > Enabled
Impulse Response > DFX Hip Hop Modern.irs or DFX Metal Rap Big Bass.irs
Cross Channel > 0%
Dynamic System > Enabled (Headset only, when needed)
Listening Device > Common Earphone v2
Dynamic Bass > 14%
ViPER Bass > Enabled
Bass Mode > Natural
Bass Frequency > 40hz
Bass Boost > 13dB
ViPER Clarity > Enabled
Clarity Mode > Natural
Clarity > 6dB
AUDIOPHILE | PROFILE
To use the Audiophile™ Profile, extract the Audiophile 10.0 Profile zip and merge the
/ViPER4Android folder into the directory where /ViPER4Android/Profile/Stock exists.
Possible location paths are:
/data/media/0
/data/media/legacy
/mnt/runtime/write/emulated/0
/mnt/runtime/write/emulated/legacy
/sdcard
/sdcard/0
/storage/emulated/0
/storage/emulated/legacy
TESTING | REFERENCE SONGS
Faded - Alan Walker https://open.spotify.com/track/1brwdYwjltrJo7WHpIvbYt
Sing Me To Sleep - Alan Walker https://open.spotify.com/track/6UcTHiP25meOD9ox8Rspgx
Closer - The Chanismokers https://open.spotify.com/track/7BKLCZ1jbUBVqRi2FVlTVw
Let Me Love You - DJ Snake https://open.spotify.com/track/0lYBSQXN6rCTvUZvg9S0lU
Don't Let Me Down - The Chanismokers https://open.spotify.com/track/1i1fxkWeaMmKEB4T7zqbzK
F.A.Q | FREQUENTLY ASKED QUESTIONS
How do i request feature, review or submit bug report?
For requesting a feature, go here.
For review, go here.
For submitting errors and bug reports, go here.
I get [app name] force close message on dirty flash? What to do?
The way Android handles permissions has changed from marshmallow, so first see if you have given all the required permission to the app through Settings>Apps. This should fix the problem. If not then-
Reboot to TWRP recovery.
Wipe system, cache, and dalvik cache in Wipe > Advanced Wipe.
Flash Project-X zip.
Flash GApps zip.
Reboot to system.
When i open AM3D app, it shows white screen then crashes? What to do?
AM3D audio enhancement requires a strict permissive selinux and if you choose Late Autumn kernel you won't have this problem. If you choose some other kernel then there is a workaround for it. First set your selinux to permissive by modded kernel adiutor or selinux mode changer and then just a do a soft reboot. You should get AM3D working now.
Why does xposed installer says as 'firmware is not active'?
The installer just installs the apk in system/data and I am currently working getting xposed firmware installed at the starting only. Till then you need to flash the xposed zip manually.
Where is AdAway?
If you flashed mother of ad blocking, then that is what you flashed, not AdAway. These are different things. MoaAB is a simple replacement of your stock hosts file that in turn blocks ads.
Why is my battery life crap?
Start by looking at your custom kernel, or by looking at user apps you use. Also simply constantly watching your battery is a battery drainer. The rom is seldom at fault with battery drain problems, and if it is to blame, then it is most probably and upstream google issue and not Project-X.
How do I install Project-X?
To install Project-X, you will need a custom recovery (preferably TWRP). After that, you will need to do a clean install, which is starting completely fresh (losing all of your apps and data). A clean flash consists of backing up your important data, booting into TWRP, wiping system, data, cache, and dalvik cache, then flashing the ROM and the recommended GApps. You will not lose your files (photos, music, other media) as long as it is in your internal storage folder (/sdcard, /data/media, or /storage/emulated/0). This process is expanded upon in the installation guides located at the top of this post.
How can I update Project-X?
If it is not a major Android update (like from Marshmallow to Nougat) or another major reason to clean flash, you should be okay to dirty flash (flash just the ROM zip without wiping anything). Always find the latest installation post (linked at the top of this post) and read to see if there were any reasons to clean flash (like a rebase or major change). Furthermore, I keep my installation guides at the top of this post up to date with the latest info. ALWAYS MAKE A BACKUP AND PLEASE CLEAN FLASH BEFORE REPORTING MAJOR ISSUES.
When will Project-X get an update (for the new security patch, etc)?
This shouldn't even be a question you are asking on XDA as ETAs are forbidden due to the free nature of the work provided. However, I aim to have the update merged as quickly as possible and then released relatively soon. Keep in mind I have to also manage my studies so releasing is not a trivial task.
Should I flash GApps on a dirty flash?
I don't recommend it. For some people it is habit and they never experience issues; others do it and have massive force quits on startup that are only solved via a clean install. Even if there is a new GApps package available, they are updated through the Play Store and you don't lose them on a dirty flash like with some other ROMs because there is a backup tool. There is no need to flash them.
Should I wipe system when doing a dirty flash?
I would not recommend it. When you wipe system, your GApps are erased as well but their data remains in the data partition. When you reflash GApps, the GApps data may be for a newer version, causing issues. Updating through the Play Store may resolve this but just trust the dirty flashing process and don't do any wipes other than caches when dirty flashing.
How can i improve my sound experience more?
You can improve the sound quality more by downloading the audiophiles from here. If you want to replicate my setup then the detailed instructions are given here.
If you would like to see my favourite songs, then here is the link - https://open.spotify.com/user/slaterock111/playlist/7qDp7erOzwHka3K1EL76u9
CHANGELOG | VERSIONS
Code:
[B]Version 1.3[/B]
- New Awesome Marvel vs DC bootanimation
- Added Vivoâ„¢ V3 Max Advanced Digital Signal Processing modules:
- AudioSphere
- DolbyMobile
- DolbySurround
- DTS HPX
- SRS TruMedia
- Added Vivoâ„¢ V3 Max BBEâ„¢ Sonic Maximizer library and effect.
- Fixed a couple of errors in the script concerning libhuaweiaudioprocessing.so and audio_effects_vendor.conf manipulation.
- Added libqcompostprocbundle.so for Qualcommâ„¢ devices
- Attempt to fix status error 7 in aroma installer
- Added MK File Explorer
- Updated Jerrica Kernel to Cosmos
- Updated Late Autumn Kernel to 4.0-Grey
- Updated MoaAB to 10202016-R1
- Updated Kernel Adiutor to 0.9.31.2
- Updated Es File Explorer to 4.1.4
- Updated MiXplorer to 6.8.7 BETA
- Updated Lspeed to 1.3.9.12
- Updated Pixel Launcher to v7.1.1
- Updated GoogleWallpaperPicker to v1.0.0
- Removed Amaze File Manager
- Set menu button as recents button
[B]Version 1.2[/B]
- Updated with october security patch
- Added ES File Explorer as an option
- Added Google Now Launcher as an option
- Added Nougat ringtones and notifications
- Added Vivoâ„¢ V3 Max Qualcommâ„¢ sound libraries and effects.
- Added ViPER4Android kernels and profiles
- Added Xposed installer as an option
- Updated nexus launcher with latest pixel launcher
- Updated Lspeed app to stable v1.3.9.9
- Reverted back to stock android font
- New custom theme for AROMA Installer
[B]Version 1.1[/B]
- Added Pure Audio Engine 2.0
- Added Lspeed app as option
- Changed the font to weebly sleek ui
- Updated Late Autumn kernel to 2.4S
- Realligned the bootanimation
- Removed berserk kernel and xposed
[B]Version 1.0[/B]
- Initial public release
- AROMA Installer included
- Tons of options/mods
- Based on CM13 Android 6.0.1
- Too much awesome to log
Happy Birthday Mate.
This is an amazing rom, smooth as butter. I like the aroma installer very much.
Thanks .
Bugs:
Music is not playing in berzerk kernel.
Reserved
bro please add a credit to all other kernel devs(including me ) u can't just include our work in yours without even giving us a thanks
iamsubhranil said:
bro please add a credit to all other kernel devs(including me ) u can't just include our work in yours without even giving us a thanks
Click to expand...
Click to collapse
Done! Was about to do that early only but was a little busy coz it was my birthday.
anandmore said:
Done! Was about to do that early only but was a little busy coz it was my birthday.
Click to expand...
Click to collapse
ooo what a nice way for a celebration. happy bday bro :laugh::good::good:
iamsubhranil said:
ooo what a nice way for a celebration. happy bday bro :laugh::good::good:
Click to expand...
Click to collapse
Thank you very much!
BTW i have to say you did a great job on the kernel, I am fully impressed with it and will be looking for further updates. Just keep the Selinux to Permissive only, it helps audiophiles like me. :laugh:
anandmore said:
Thank you very much!
BTW i have to say you did a great job on the kernel, I am fully impressed with it and will be looking for further updates. Just keep the Selinux to Permissive only, it helps audiophiles like me. :laugh:
Click to expand...
Click to collapse
I hope the latest update already fixed that. Hasn't it?
Now i'm on the verge of adding dt2w and fine tuning mako-interactive combo
Perfect.
Now that's called a true custom Rom. Happy birth day.
---------- Post added at 05:21 PM ---------- Previous post was at 05:18 PM ----------
Now that's called a true custom ROM.happy birthday.
X.lord said:
Happy Birthday Mate.
This is an amazing rom, smooth as butter. I like the aroma installer very much.
Thanks .
Bugs:
Music is not playing in berzerk kernel.
Click to expand...
Click to collapse
I had this problem with CM13 too.
alok pupun said:
Now that's called a true custom Rom. Happy birth day.
---------- Post added at 05:21 PM ---------- Previous post was at 05:18 PM ----------
Now that's called a true custom ROM.happy birthday.
Click to expand...
Click to collapse
Thank you very much!
X.lord said:
Happy Birthday Mate.
This is an amazing rom, smooth as butter. I like the aroma installer very much.
Thanks .
Bugs:
Music is not playing in berzerk kernel.
Click to expand...
Click to collapse
I think it is berserk kernel's problem, till then flash some other kernel.
PatrickDziura said:
I had this problem with CM13 too.
Click to expand...
Click to collapse
The problem persists here because Project-X is based on CM13.
Can I use open gapps aroma?
PatrickDziura said:
Can I use open gapps aroma?
Click to expand...
Click to collapse
You can use any gapps, i just prefer bank's.
Btw @anandmore I'd like to see the XM libraries included in the ROM. They actually gives fantastic sound
iamsubhranil said:
Btw @anandmore I'd like to see the XM libraries included in the ROM. They actually gives fantastic sound
Click to expand...
Click to collapse
Added to my to-do list.
I installed this rom and the performance is awesome. But I have some problems with jerrica and berserk kernel with this rom. Both give me corrupted sd Card when I format as internal storage. With lateautumm kernel everything is fine, expect for a kernel bug, but it's not a rom bug.
Dude,is both sim slot 4g supported? And can I flash on lolypop bootloader?
hello sir, please make a video how to install project x rom
!
Hi guys,
Today,I will explain how to work Latest Dolby Oreo on Oreo Roms.
This is not my project.If you want to go main Thread,the link is under this line
Main Thread:https://forum.xda-developers.com/android/software/app-dolby-atmos-axon-7-oreo-port-t3740508
Note:This thread is just a Guide.All Files and Links are copied from main Thread
.
Install structions
1)Flash Magisk 16.3 zip from Recovery (If you dont have it)
here
Reboot System
2) Download latest Dolby Audio for Oreo
here
3a) If you have Aosp Extended installed
-Open Magisk App
-Go to Modules
-Add new Mod
-Select DolbyAtmos_Axon7_Oreo_Unity
-Flash it
-Reboot
3b)if you have soundmod on your Rom
-Magisk Manager
-Open Magisk App
-Go to Downloads
-Search "Audio Modification Library " and install it
-Reboot
-Open Magisk App
-Go to Modules
-Add new Mod
-Select DolbyAtmos_Axon7_Oreo_Unity
-Flash it
-Reboot
Credits
@guitardedhero
@Zackptg5
@ahrion
@topjohnwu
## le_x2 -A-TEST-MIUI-10-OREO-BETA 8.9.13 xiaomi-miui.gr Ported 13.09.2018_le_x2 ##
All credits goes to Greek forum xiaomi-miui.gr. Rom is from there (sources)
Also credits go to @shivatejapeddi for his help and kernel..e.t.c.
*Changelog*
- Rom is Multilanguage and clean
- Several changes inside System tov work on our phone
- More Translations inside
- Gapps and all Google services included
- Including all latest framework patches
- Includes all latest changes and MIUI10 updates
- Includes latest Gcamera fixed modded (check at Aroma)
- Dolby Atmos
- IR included
- Security authenicator included
- Includes latest available Manager and themes.
- More....
Rom Link
https://drive.google.com/uc?id=13lzE...xport=download
!!IMPORTAND!!
Rom is pre -A- stage..bugs:br,cam,fp......
TWRP vendor compatible needed.
INSTALLATION
Make system,data,dalvik and cache wipe..reboot to recovery and flash rom.
Go through Aroma installer read carefully and choose custom installation... Choose betwin original Miui rom properties and LeMax2 custom inside Aroma..
Don't choose Magisk before 1st boot ..install it after..is faster and better..is inside rom zip at data>app>Magisk
With Aroma installer we can choose what we want and install according our need's...
NOTICE
Is a test rom!! Not ready for daily use..only test..
DO NOT ASK FOR UPDATE OR ETA. When is ready will be released...
I hope to have some help to fix all bugs and more stuff..
Compatible TWRP
https://drive.google.com/file/d/1_WK...ew?usp=sharing
Dark-Evil said:
## le_x2 -A-TEST-MIUI-10-OREO-BETA 8.9.13 xiaomi-miui.gr Ported 13.09.2018_le_x2 ##
All credits goes to Greek forum xiaomi-miui.gr. Rom is from there (sources)
Also credits go to @shivatejapeddi for his help and kernel..e.t.c.
*Changelog*
- Rom is Multilanguage and clean
- Several changes inside System tov work on our phone
- More Translations inside
- Gapps and all Google services included
- Including all latest framework patches
- Includes all latest changes and MIUI10 updates
- Includes latest Gcamera fixed modded (check at Aroma)
- Dolby Atmos
- IR included
- Security authenicator included
- Includes latest available Manager and themes.
- More....
Rom Link
https://drive.google.com/uc?id=13lzE...xport=download
!!IMPORTAND!!
Rom is pre -A- stage..bugs:br,cam,fp......
TWRP vendor compatible needed.
INSTALLATION
Make system,data,dalvik and cache wipe..reboot to recovery and flash rom.
Go through Aroma installer read carefully and choose custom installation... Choose betwin original Miui rom properties and LeMax2 custom inside Aroma..
Don't choose Magisk before 1st boot ..install it after..is faster and better..is inside rom zip at data>app>Magisk
With Aroma installer we can choose what we want and install according our need's...
NOTICE
Is a test rom!! Not ready for daily use..only test..
DO NOT ASK FOR UPDATE OR ETA. When is ready will be released...
I hope to have some help to fix all bugs and more stuff..
Compatible TWRP
https://drive.google.com/file/d/1_WK...ew?usp=sharing
Click to expand...
Click to collapse
very bad rom.. slowwwww
not.stable
test!!!
Download link not working..
Any correct link?
Link not working ....
I think this is the same ROM, link is from Crisbalgreece's page.
https://drive.google.com/uc?id=13lzEAQD5RMGGjhx7wAbenFd38PdG7loF&export=download
What a shame!!!!!!!!!!
It is Cris Work.
Great. Why have you deleted the download link?
Great rom. Expectinf new update soon with OTA?
Where a good place to start for our new ROM?
I see the sticky post, but it's from Ubuntu 13.10 so very old.
Some things about what we wish to accomplish:
-Based on latest AOSP pie
- magisk integration (or other root solution). One possible solution is a userdebug build.
- Substratum integration (or similar theming engine)
- better storage and RAM optimizer
- modify startup script
- Some version of google apps (probably opengapps)
- customize everything to user desire
- battery optimizations
- possible TWRP installer inbuilt
- inbuilt OTA updater
- youtube vanced instead of standard YouTube
- inbuilt hosts files editor/importer
- inbuilt adblock separate from hosts management (?)
- custom subs theme for lunaOS
- lawnchair as default launcher
- optimize boot up sequence
- audio enhancer (not in first release)
- f Droid or play store alternative
- Aroma installer
- light/dark/black material rounded theme
- call recording
- properly support aptX and aptX HD
- Easter eggs galore
Obviously, we're not looking to integrate all that on first release, and don't need integration instructions for all (but those are welcome).
We all have basic to advanced Android knowledge, and I personally have worked with things like TWRP development, magisk modules development, etc