MODERATOR NOTICE: LINKS REMOVED
Per the forum rules, using XDA to promote your own blog is not allowed:
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
Click to expand...
Click to collapse
Encouraging members to participate in forum activities on other phone related sites is prohibited.
Click to expand...
Click to collapse
_________
Remember: This method will work with only G-955F-G950FXXU1AQDA
Download Below Software and files in your Computer Desktop/Laptop.
1/ Odin V3.12.3
2/ FRP Remove ADB File*
3/ ADB ENABLED
Drag all software on your PC Desktop.
Enter in DOWNLOAD MODE:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
there you will have message of "WARNING", so press "Volume UP" key from there to go into Downloading Mode of your galaxy S8 plus and S8 edge.
Connect Your Device with Computer / Laptop:
Extract, install and open "Odin software" to bypass FRP Protection, and after connect your S8 Plus and S8 Edge android device with your PC or Laptop, to make sure its connection is ok, just see inside "ODIN Software", there will be one "O:[COM6]" on the left top side of Odin, same as in below image:
Now inside "ODIN Software", click on "AP" button, and then give the file location of* "ADB ENABLED.tar"
then click "START" button from odin, and wait till this process finish, on finishing this process, you will have "PASS" green color message on your ODIN top left BOX.
Let your Device Turn on Properly
Once your device turned on properly, now go back to your pc, and right click and extract "FRP Remove ADB File" software on your desktop, remember this software we have downloaded before from top of this post. once extraction finish, go inside extracted folder, and from there
While pressing "Shift key" press "Right Mouse Button" together.
and then you will have right click menu on your computer screen as shown in below image.
After that, from right click menu, you have click on "Open command window here", so you will have a cmd window on your computer screen, now make sure, your mobile is connected to fastboot, for that we have to type in cmd window this below code.
adb devices
after pasting above adb devices code in cmd, you must get your android device detail there, which will make sure that your device is connected to fastboot.
Copy below code one by one, and past into your command prompt cmd:
CODE 1:
adb shell content insert –uri content://settings/secure –bind name:s:user_setup_complete –bind value:s:1
CODE 2:
adb shell am start -n com.google.android.gsf.login/
CODE 3:
adb shell am start -n com.google.android.gsf.login.LoginActivity
Final Step: Restart your device, after completing above 3 code process, and then you will have initial setup on your S8 Plus and S8 Edge android device, just complete that initial setup, and you are done to bypass FRP Protection from your Galaxy S8 PLUS, Galaxy S8 Edge.
For further: ******
Odin just crashes for me.
Does this method works on Oreo?
mrjoy said:
Does this method works on Oreo?
Click to expand...
Click to collapse
How did you miss the big red letters? This method will work with only G-955F-G950FXXU1AQDA
Or just flash a combination ROM, then flash stock. That's what I do when I've locked myself out my phone
Sent from my Pixel 2 XL using Tapatalk
Sorry
kekistaneerefugee said:
How did you miss the big red letters? This method will work with only G-955F-G950FXXU1AQDA
Click to expand...
Click to collapse
Sorry, i did not get you
help, my s8 + does not let me install twrp, says error recovery frp lock, and when the flash stock firmware says encryption error, should I flash before G955FXXU1AQDA? I can not find that firmware !! HELP
Please let me guide for G950U
i have SM G950U i want to bypass a google account i downloaded the Odin and Combination files and when i used to connect my device it detected but while flashing its just get failed after ''Setup Conection"..
please give me proper link and please guid me.. Thanx me advance.
I have Oreo (Renovate) but with BL AQL5
I can't fully upgrade firmware to CRC7 because FRP Protection
But I can't also downgrade rom to AQL5 (NOUGAT)
Odin get error when I try flash AQL5 AP and CSC
Have you got any solution for full downgrade to NOUGAT and make BYPASS ?
deba/genesis team dev said:
Bypass Samsung S8 Latest Security Patch -https://www.gadgetsdr.com/2018/06/bypass-frp-samsung-s8/
Click to expand...
Click to collapse
is it necessary to downgrade from 8 to 7 ?
tomaasz said:
I have Oreo (Renovate) but with BL AQL5
I can't fully upgrade firmware to CRC7 because FRP Protection
But I can't also downgrade rom to AQL5 (NOUGAT)
Odin get error when I try flash AQL5 AP and CSC
Have you got any solution for full downgrade to NOUGAT and make BYPASS ?
Click to expand...
Click to collapse
Here is combination file for bootloader version 3 ( Oreo ) . You either on 3 or 4.
https://tx5.androidfilehost.com/dl/...3836283760/COMBINATION_FA70_G955USQU3ARD1.zip
I flashed combination file, ADB commands. then factory firmware . No luck. FRP still on.
My SM-G955U does not have "OEM Unlock " Option.
EDIT:
Works . every time I enabled oem mode slider with slider to the enable position but would revert back to disabled. I had to hold down the button for 3 seconds then a smallmenu that displayed radio buttons .
Never ran into this with any other handset.
mrjoy said:
Does this method works on Oreo?
Click to expand...
Click to collapse
yeah this would work, but for that you will need flasher file, you can check your device firmware code by going into recovery mode
ah that's very bad? are you still facing frp lock issue?
Bypass Google Account with other launcher
Hy their, my g950F is on Android 7 with Security Patch Level U1 (1) Oktober 2017Patch, and I could bypass old Google Account lock by install 91Launcher and start with other Google Account. But how could I deinstall now the old Account?
And I can't open Developer Options to OEM unlock or see In Security the Old Samsung Account!
Someone has an idea, I wanted to Try Combination Files. But while the other Launcher is working fine its okay.
But I Want to Root and install TWRP on the Phone.
So I want to complete Erase the Old Samsung Account. If I go to Savings & Recovery Options, for Hard Reset aso. I first have to log in again in the old Samsung Account Before I could do anything to erase and Use Normal Google Launcher?
Thanks for all the help
any method for android 9
in recovery this appear /PPR1.180610.011/G955FXXU4DSBF
So is a way to remove FRP on samsung s8+ with pie?
I cant find anywhere the Combination file firmware for SM-G955F (S8 plus) for Android 9.0 Pie, only FA70. Is there a way to make it ?
Related
THIS GUIDE IS FOR THE MOTO G6 PLUS ONLY
2: Returning to Stock
If for any reason your phone is no longer functioning properly such as a bootloop (the phone is restarting itself over and over), "Can't Load Android System," "Startup Failed", or any such error you can fix this by flashing the stock firmware using fastboot.
I have taken stock firmware version OPW27.113-89 and packaged it with a few extras. XDA Member luiz_neto has provided a modified logo.bin that removes the unlocked bootloader warning during boot. A special thanks to XDA Member lohanbarth for providing the stock firmware. I have included the fastboot file for Windows, Linux and Mac users. Windows users can run the .bat file to execute all the necessary commands. For Linux and Mac users, I have included a bash script. You will need access to a PC and connect your phone via a USB cable.
*Downloads:
Modified Stock Firmware OPW27.113-89: (Download)
MD5: 3a1d984a8a3d0c57fb21931a8004eb27
Instructions:
*On your phone:
2A. With the phone powered off(even if for just a moment between the phone rebooting) hold the Power button and the Volume Down(Vol -) at the same time. You should boot into what is called the bootloader. It should display information on the screen and state "AP Fastboot Flash Mode" in orange lettering.
*On your PC:
2B: Extract the firmware which is in tar.xz container/file extension. Windows user probably need to use Winrar, 7Zip or PeaZip to extract the file.
2C: Using Windows Explorer, navigate to the folder EVERT_OPW27.113-89_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml and click on it to open it.
2D: Hold the Shift Key on your Keyboard. While holding Shift, Right Click in the window(not on the file). Depending on your windows version you should see either "Open PowerShell Window here" or "Open Command Window here." Select which ever one applies.
2E: You will see a black and white screen or a blue and white screen. The steps are the same no matter which screen you see. Simply type(or copy and paste) the following command:
Windows:
Code:
flash_rom.bat
For Linux and Mac you need to make the script file executable. It will make the fastboot binary executable for you. From a terminal run these 2 commands one at a time:
Linux:
Code:
chmod a+x flash_rom.sh
./flash_rom.sh
Mac:
Code:
chmod a+x flash_rom_mac.sh
./flash_rom_mac.sh
Your phone should reboot on it's own. If for some reason it doesn't try tapping the enter key on your keyboard or use the volume keys to make sure “Start” is selected on the right side of the phone and pres the power key on the phone. It should successfully boot the stock firmware.
Xplorer4x4 Hello good afternoon is on is corrupted When it unzips it says that header is corrupted! @Xplorer4x4
carlosgeraldo said:
Xplorer4x4 Hello good afternoon is on is corrupted When it unzips it says that header is corrupted! @Xplorer4x4
Click to expand...
Click to collapse
Did you try to download the package again?
Does anyone know whether It's possible to remove the "Your device has loaded a different operating system." after flashing stock rom through fastboot and relocking bootloader? I was looking to sell the phone...
Mara-X said:
Does anyone know whether It's possible to remove the "Your device has loaded a different operating system." after flashing stock rom through fastboot and relocking bootloader? I was looking to sell the phone...
Click to expand...
Click to collapse
Flash the stock firmware in my op.
Sent from my Moto G6 Plus using XDA Labs
Xplorer4x4 said:
Flash the stock firmware in my op.
Sent from my Moto G6 Plus using XDA Labs
Click to expand...
Click to collapse
No, I'm not talking about the unlocked bootloader warning, but the message that appears after you lock the bootloader. "Your device has loaded a different operating system"
Mara-X said:
No, I'm not talking about the unlocked bootloader warning, but the message that appears after you lock the bootloader. "Your device has loaded a different operating system"
Click to expand...
Click to collapse
I have never relocked my bootloader so I can't say for sure but this sounds out of the ordinary. Did it boot fine with an unlocked bootloader?
Sent from my Phh-Treble vanilla using Tapatalk
weazie said:
Did you try to download the package again?
Click to expand...
Click to collapse
I found the error: it was in my PC I started a program to fix the registry and after that unzipped the file normally!
Mara-X said:
No, I'm not talking about the unlocked bootloader warning, but the message that appears after you lock the bootloader. "Your device has loaded a different operating system"
Click to expand...
Click to collapse
Hi! have you succeed with your issue flashing this stock firmware ?
Does this stock firmware helps to remove warnings "This device has loaded a different operating system", and "Verity mode disabled" during boot?
And the worst thing is the message "System integrity compromized" and hens - GooglePay disabled and no software updates., when bootloader is re-locked?
MrMatnenko said:
Hi! have you succeed with your issue flashing this stock firmware ?
Does this stock firmware helps to remove warnings "This device has loaded a different operating system", and "Verity mode disabled" during boot?
And the worst thing is the message "System integrity compromized" and hens - GooglePay disabled and no software updates., when bootloader is re-locked?
Click to expand...
Click to collapse
Same problem here. I hate this messages
<bootloader> flash permission denied
friends, any command I give appeared this, someone knows how to solve?
Failed anything I've tried... Can you help @Xplorer4x4 ?
andreym_costa said:
Failed anything I've tried... Can you help @Xplorer4x4 ?
Click to expand...
Click to collapse
Shows the message "Failed Remote ' ' and "Flash permission denied"
andreym_costa said:
Shows the message "Failed Remote ' ' and "Flash permission denied"
Click to expand...
Click to collapse
You MUST provide MORE information! Screenshots, a detailed error description and not only a piece of your error.
WoKoschekk said:
You MUST provide MORE information! Screenshots, a detailed error description and not only a piece of your error.
Click to expand...
Click to collapse
I'm trying again... And now seeing this, can you help?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
andreym_costa said:
I'm trying again... And now seeing this, can you help?
Click to expand...
Click to collapse
Please follow my guide below. That would be much easier I think, because it seems you are doing several things wrong.
1. download ADB/Fastboot tools from here and extract the downloaded zip to 'C:\' to create the path 'C:\platform-tools'
2. download your current firmware build here.
You use 116-16-22 but the latest build is 11-16-29 for RETBR.
3. extract the firmware.zip to 'C:\platform-tools'
Watch out to extract only single files and images to that path and do not create a subfolder => see screenshot attached
4. extract attached flashfile.zip to 'C:\platform-tools'
5. open 'C:\platform-tools' in Explorer and type 'cmd' in the address bar and hit 'Enter'
=> opens a new cmd window
6. boot your Moto into fastboot mode, connect it to your PC and run 'fastboot devices'
=> output: <SERIAL-NO> fastboot
7. execute 'flashfile.bat' and start flashing
WoKoschekk said:
Please follow my guide below. That would be much easier I think, because it seems you are doing several things wrong.
1. download ADB/Fastboot tools from here and extract the downloaded zip to 'C:\' to create the path 'C:\platform-tools'
2. download your current firmware build here.
You use 116-16-22 but the latest build is 11-16-29 for RETBR.
3. extract the firmware.zip to 'C:\platform-tools'
Watch out to extract only single files and images to that path and do not create a subfolder => see screenshot attached
4. extract attached flashfile.zip to 'C:\platform-tools'
5. open 'C:\platform-tools' in Explorer and type 'cmd' in the address bar and hit 'Enter'
=> opens a new cmd window
View attachment 5654883
6. boot your Moto into fastboot mode, connect it to your PC and run 'fastboot devices'
=> output: <SERIAL-NO> fastboot
7. execute 'flashfile.bat' and start flashing
Click to expand...
Click to collapse
I tried again and now these errors occur. I thought it might be a locked bootloader, but apparently everything is ok, at startup it has an unlocked bootloader warning. And really thank you to helping me.
andreym_costa said:
I tried again and now these errors occur. I thought it might be a locked bootloader, but apparently everything is ok, at startup it has an unlocked bootloader warning. And really thank you to helping me.
Click to expand...
Click to collapse
No, your bootloader isn't unlocked. The OEM-Unlock toggle would be inactive (greyed out) in case of an unlocked bootloader.
Hi guys, I'm here to learn something about Android Security System.
I have this Sapphire TV BOX
model: DWI259S / UIW4020ETI / UIW4020ETI2 (Sapphire)
SoC: Broadcom BCM7271
The goal of this post is to understand how I can gain root access on this device
I know how to turn it in recovery mode .
if you are interested you can read this Reddit post from ams_sharif
"You can boot to recovery by switching the unit off ( the black button in the back), then while holding the power button (the one on the side, next to the pair button) turn the set top box on until the recovery shows up."
This is what I see.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried to flash an update.zip in order to see if I can execute command through any script, but the verification of the signature fails.
I tried to click on "Apply update from USB" (that is adb sideload) , but connecting the tv box on the pc nothing happen, no device found neither with "adb devices"
I tried also to click on "Reboot to bootloader" but "fastboot devices" command return nod devices connected.
My idea was to read the recovery image from fastboot extract it and try to compile my own TWRP
Do you have any suggestions to guide me in the right way?
@element14
When you enter
Code:
adb devices
and don't see an entry listed under the “List of devices” section, then your device isn't connected to PC.
Same is case when you enter
Code:
fastboot devices
Recovery option "Apply update from USB" isn't equal to "adb sideload". This option assumes the Update.Zip you want to flash is located on USB-device connected with your TV box.
With regards to rooting your TV box you can try to flash Chainfire's SuperSu Pro.
BTW: TWRP isn't a recovery image you compile in order to flash, it's merely a touch-enabled replacement for device's Stock Recovery menu as shown by you
Example screenshot:
jwoegerbauer said:
@element14
When you enter
Code:
adb devices
and don't see an entry listed under the “List of devices” section, then your device isn't connected to PC.
Same is case when you enter
Code:
fastboot devices
Recovery option "Apply update from USB" isn't equal to "adb sideload". This option assumes the Update.Zip you want to flash is located on USB-device connected with your TV box.
Click to expand...
Click to collapse
I tried to flash a custom script that use the
Code:
u_print()
function , but the signature verification fails i get an
Code:
errorr:21
jwoegerbauer said:
With regards to rooting your TV box you can try to flash Chainfire's SuperSu Pro[/url].
Click to expand...
Click to collapse
Are you sure that I can flash an unsigned zip like superSu , with a stock recovery and locked bootloader ?
jwoegerbauer said:
BTW: TWRP isn't a recovery image you compile in order to flash, it's merely a touch-enabled replacement for device's Stock Recovery menu as shown by you
Click to expand...
Click to collapse
The TWRP is an open source project , all the source code is avaiable. But to have it works , you need the original kernel .
I tought , If I can unlock the bootloader I can read the image of the recvoery.img and from it extarct the kernel
Thanks for your answer.
@ element14
did you manage to make the device usebale?
Hello, i am also interested to reset\flash this device but I couldn't find any useful guide, did you manage to root it or flash it, I want to use it as android STB.
As long as you can establish an USB-connection ( read: ADB connection ) then you can root any device's Android OS, otherwise NOT.
Any updates on this topic? It would be great to know if someone was able to root it.
If this is the etisalat version of this box I have gotten APKs to work on it.
xilogofficial said:
If this is the etisalat version of this box I have gotten APKs to work on it.
Click to expand...
Click to collapse
What apk exactly?what you can do with this apk? And how you installed?
element14 said:
What apk exactly?what you can do with this apk? And how you installed?
Click to expand...
Click to collapse
I think it lets you install any APK on the device. Check https://emiratestel.github.io/website
There is only one port. Is there any other way? And how can i play videos from usb
xilogofficial said:
I think it lets you install any APK on the device. My method:
Going to apps list:
- insert usb
- click browse
- go up to internal storage, press ok, click Apps
part 1
- go to apps list, keep usb inserted
- scroll to Files, click it, click open
- if it opens skip to part 2
- else it will crash and show the first time boot
- go to apps list again while keeping usb inserted
- open files again
part 2
- connect a mouse to other USB port, navigate into the USB and into where you placed your APKs
- double click the apk to install it
- on first time install, it will show an error about unknown sources
- click settings on the prompt
- enable all sources shown
- continue installing the app
Click to expand...
Click to collapse
There is only one usb port. Is there any other way? And how can i play videos from usb
there's another on the bottom, or use a USB hub.
you can't play videos from USB without installing third party apps.
xilogofficial said:
If this is the etisalat version of this box I have gotten APKs to work on it.
Click to expand...
Click to collapse
Good Day! Appreciate your support . Dear Exactly Etisalat TV box model: DWI259S, but it is locked on Etisalat home page with their logo as I don't have Etisalat subscription any more, in that situation how possible to browse an APK file as you said in below steps? 2nd thing there is no standard Firmware available by Manufacturer (Technicolor), Please make a video or at least solve with help of photos and help us close this topic. Till date solution is not yet provided, Please help, Thanks and appreciate your support
.
element14 said:
Hi guys, I'm here to learn something about Android Security System.
I have this Sapphire TV BOX
model: DWI259S / UIW4020ETI / UIW4020ETI2 (Sapphire)
SoC: Broadcom BCM7271
The goal of this post is to understand how I can gain root access on this device
I know how to turn it in recovery mode .
if you are interested you can read this Reddit post from ams_sharif
"You can boot to recovery by switching the unit off ( the black button in the back), then while holding the power button (the one on the side, next to the pair button) turn the set top box on until the recovery shows up."
This is what I see.
I tried to flash an update.zip in order to see if I can execute command through any script, but the verification of the signature fails.
I tried to click on "Apply update from USB" (that is adb sideload) , but connecting the tv box on the pc nothing happen, no device found neither with "adb devices"
I tried also to click on "Reboot to bootloader" but "fastboot devices" command return nod devices connected.
My idea was to read the recovery image from fastboot extract it and try to compile my own TWRP
Do you have any suggestions to guide me in the right way?
Click to expand...
Click to collapse
Any Luck dear, Please advise as I want the same solution and receive same error 21.
engr.sys said:
Any Luck dear, Please advise as I want the same solution and receive same error 21.
Click to expand...
Click to collapse
Kindly Join our Discord Server Link :https://discord.gg/sbFnauNTWy
I can help u there
Hi
Can you please share the APK please ?
any update on this? did anyone managed to finally root this device or least sideload and apk?
b1acktiger said:
Hi
Can you please share the APK please ?
Click to expand...
Click to collapse
PM Me
Can you please share the APK please ?
Code:
Your warranty is now void.
If you root your device, Your KNOX status will be tripped.
You can still pass the safety net after you root if you follow the instructions.
I am not responsible for bricked devices, dead SD cards although it is not really possible
Please do some research if you have any concerns about doing this to your device
How to flash official firmware? (not the root and unlock bootloader part!)
You will need:
A Galaxy S22 Plus and common sense
Samsung Odin (the flashing tool of the official firmware)
https://dl2018.sammobile.com/Odin3-v3.14.1.zip
You need to extract the zip file and you are going to use the file Odin3_v3.14.1.exe inside the folder.
Samsung Android USB Driver for Windows
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
Double-click and install the exe file.
Samsung Official Firmware
Release 1.0.3 · zacharee/SamloaderKotlin
Contribute to zacharee/SamloaderKotlin development by creating an account on GitHub.
github.com
Download the platform you want to download to. (Windows)
You need to extract the zip and double click open the file Bifrost.exe inside the folder.
You need to fill in the Model, Region, press the Check for Updates button and the Download button.
How to find the Model: on your phone → Settings → About Phone → The third row says the Model number and you need to remove the part with the part of /xx, for example, SM-S906B/DS and you only need to type SM-S906B
How to find the Region: You can check the Region at this link https://samfrew.com/model/SM-S906B/ or https://samfrew.com/model/SM-S906E/
You need to find find a three-letter word depending on your carrier and country and type it in Bifrost, for example, EVR
Press the Check for Update button and download it with the Download button.
Put it to a place you can easily find, ie. Desktop.
After downloading it, find the file SM- S906x_x_xxxxxxxx_xxx.zip.enc4 on the place you put it and change the document format from .enc4 to .zip. Then, double click and extract the file.
Open Odin3_v3.14.1.exe and turn off your phone. Connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone. When you arrived at Download Mode press volume up. Go back to Odin3_v3.14.1.exe:
-Click on BL and select BL_S906xxxxxxxxxx.tar.md5
-Click on AP and select AP_S906xxxxxxxxxxx.tar.md5
-Click on CP and select CP_S906xxxxxxxxxx.tar.md5
(If you want to keep your data don't flash CSC).
-Click on CSC and select CSC_OMC_xxxxxxxxxx.tar.md5
-Click on USERDATA and select HOME_CSC_OMC_xxxxxxxxxx.tar.md5
Press Start to flash the firmware, after done, your device will automatically reboot to the system.
How to unlock the bootloader?
Go to your phone → Settings → About Phone → Software information → Press Build number 6 times until you see the notice “You’re now a developer”
Go in Settings → Developer options → enable OEM unlocking
Power off your phone first. Then, connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone.
When you arrived at Download Mode, long press volume up until you see the black screen. Confirm to unlock the bootloader and you will erase your device.
How to root your phone?
After you unlock your bootloader, you set up your phone and make sure you do not sign in google account first. Install Magisk https://github.com/topjohnwu/Magisk/releases/download/v24.1/Magisk-v24.1.apk on your phone. Oh yes, in case you do not know, you need to allow the app to install apps so that you can install the apk.
Transfer AP_S906xxxxx.tar.md5 in the firmware you download from your PC/Laptop to your phone.
Open Magisk on your phone and press the install button in the Magisk column. Select 'Select and Patch a File', 'Let's Go' and find the AP_S906xxxxx.tar.md5 and select it. You can have a cup of coffee if you like when you waiting for the patching of the file.
After finishing the patching, you need to transfer the file magisk_patched-24xxx_xxxxx.tar in the Downloads folder back to your PC/Laptop.
Turn off your phone. Connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone. When you arrived at Download Mode press volume up. Open Odin3_v3.14.1.exe on your PC/Laptop:
Click on BL and select BL_S906xxxxxxxxxx.tar.md5
-Click on AP and select magisk_patched-24xxx_xxxxx.tar
-Click on CP and select CP_S906xxxxxxxxxx.tar.md5
(If you want to keep your data don't flash CSC).
-Click on CSC and select CSC_OMC_xxxxxxxxxx.tar.md5
-Click on USERDATA and select HOME_CSC_OMC_xxxxxxxxxx.tar.md5
When it finishes flashing it, it will automatically reboot and you can gain root access.
Optional: If you want to have the safety net passed (most of the banking apps use it), then you need to install the zip
as a Magisk module in Magisk https://github.com/kdrag0n/safetynet-fix/releases
How? Go to Magisk → Modules → install from storage and select the zip you downloaded.
Here is the other region section for the S22+
https://samfrew.com/model/SM-S906E/
DarkestSpawn said:
Here is the other region section for the S22+
https://samfrew.com/model/SM-S906E/
Click to expand...
Click to collapse
Thank you very much for the reminder
This is only for the Exynos version I'd assumed?
Benetzit said:
This is only for the Exynos version I'd assumed?
Click to expand...
Click to collapse
For all model except USA model
Hi followed your instryuction on SM-S906B
the following is not possible
$su
#mount -orw,remount /
'/dev/block/dm-0' is read-only
rootadvisor said:
Hi followed your instryuction on SM-S906B
the following is not possible
$su
#mount -orw,remount /
'/dev/block/dm-0' is read-only
Click to expand...
Click to collapse
So you have already gain su
Any news? should I or someone open a ticket for this issue on Magisk github?
My magisk logs in attachment
Williamtung said:
For all model except USA model
Click to expand...
Click to collapse
I think it may apply to Canadian models too as I seem to not have an OEM bootloader unlock option in developer options.
exad said:
I think it may apply to Canadian models too as I seem to not have an OEM bootloader unlock option in developer options.
Click to expand...
Click to collapse
OK, thanks for the info. So, I think you also cannot unlock the bootloader then(except the paid services)
Williamtung said:
OK, thanks for the info. So, I think you also cannot unlock the bootloader then(except the paid services)
Click to expand...
Click to collapse
Do you know of any paid services? I wouldn't mind paying for a bootloader unlock
exad said:
Do you know of any paid services? I wouldn't mind paying for a bootloader unlock
Click to expand...
Click to collapse
Yes, but S22 plus is a new device and maybe you need to ask him is it unlockable yet
rootadvisor said:
Any news? should I or someone open a ticket for this issue on Magisk github?
My magisk logs in attachment
Click to expand...
Click to collapse
use magisk alpha
its working
s22+ exynos
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is OTA possible after root? How can we update without data loss?
Wired Life said:
Is OTA possible after root? How can we update without data loss?
Click to expand...
Click to collapse
no more OTA updates after root
you need to download firmware, patch ap file with magisk and flash firmware with home csc file
pitelasssss said:
no more OTA updates after root
you need to download firmware, patch ap file with magisk and flash firmware with home csc file
Click to expand...
Click to collapse
So on every update we need to do a full flash? Wow
And the userdata is keep?
Is there a way to backup all before update?
yes full flash with home csc to keep your data
if you want to backup your apps and data with root use migrate app from playstore
pitelasssss said:
yes full flash with home csc to keep your data
if you want to backup your apps and data with root use migrate app from playstore
Click to expand...
Click to collapse
On the root flash there were 2 "erasing everything" screens, one after a message that something is corrupt. Will this happen again?
Can you provide a simple step by step list what to do with new updated firmware?
pitelasssss said:
use magisk alpha
its working
s22+ exynos
View attachment 5571347
Click to expand...
Click to collapse
Hello can you passe me the link For this Alpha Version ?
rootadvisor said:
Hello can you passe me the link For this Alpha Version ?
Click to expand...
Click to collapse
Magisk alpha
带遥测的第三方Magisk版本，比Canary通道更加不稳定，与上游行为有较大不同，无安全性保证，无可用性保证，无隐私协议。 问题反馈请加群发送日志文件，非alpha独有问题建议先在GitHub反馈。
t.me
I am perfom this Sorry for my english, I am from Ukraine
Download archive!
We unpack. Install the adb and mtk preloader drivers, if they are not installed, restart the computer.
In the smart, turn on the developers menu, in it - "Allow OEM unlock" and "USB debugging" and connect the smart to the computer.
We drop valuable photo data from the smart to the computer for any, and, without disconnecting the smart from the PC, run the script (with the phone connected to the PC and loaded into the android phone. Reboot_to_fastboot_getvar current-slot.bat (not from the admin, just click twice).
Smart will look like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
we allow - put a daw, ok. We are waiting for the smart to reboot into fastboot, when the barcode appears on the smart screen, before that we do not press anything in the script
I did the scripts step by step, after each operation in the script window, press enter to continue, and so on until each script is closed
We look at our current slot in the window and remember the letter - a or b:
In the script, press enter so that the smart reboots and the script closes.
Run flash_tool.exe, go to this tab and check the boxes, as in the screenshot:
So we consider the necessary versions of orig. files, so as not to download and sew a specific firmware version for this instruction.
(And best of all, all the checkboxes, except for system, vendor, userdata - they are not critical, if they are not removed, it will take up a lot of space on the computer up to +74 gb, but I did not put these checkboxes, there must be some risk and passion )
We press "Read Back" and only then we connect the switched off smart to the PC, we wait, at the end we disconnect the bodies, do not touch it: sveta:
Go to this tab, remove all checkboxes! And we only put on lk_ with the letter of a non-your slot that we looked at, for example, you had slot "a" - so we put a check on lk_b and vice versa :
Click "Download" and connect the switched off smart to the PC (it was already turned off: sveta
As it flashes, we close the USB flash drive window, disconnect and turn on the smart, after loading, we connect it to the PC again, we already run the script
Unlock_Moto_E6S.bat, wait until the body reboots into a fastboot (to the barcode on the screen) and only then press the input step by step to continue in the script until it is completely closed.
Everything, the bodies are unlocked. Now you can get an excellent and fast root from Magisk, try other firmware, unsubscribe which one is buggy, which one flies. I haven't tried yet. Now I will write how to flash orig. kernel with magisk root (attached magisk boot for xt2053-1 4/64 fw RETEU 288-60-6-29 https://mirrors.lolinet.com/firmware/moto/fiji/official/RETEU/
Additionally, there is a script in the folder to delete the message when loading that the bootloader is unlocked, it does not interfere much, but I deleted it. Since this is not important, I separated it from the main script, since I did not test it on different versions of the firmware, in theory it should work on all versions, you can try after unlock. Or throw off ROM_45 from your firmware, I'll remove it from it. I now have the latest firmware flashed, it is on the server, but for some reason it did not fly through the air. If you flash it, then you can safely delete the message from the bootloader with my script, there is a file from it)
I am flash in slot_b Android 12 GSI, work. And i have in slot_a original system
severagent007 said:
I am flash in slot_b Android 12 GSI, work. And i have in slot_a original system
Click to expand...
Click to collapse
dude!! followed all your steps and i now have a bootloader unlocked and rooted device. how did you figure out the lk and signature to unlock that??
proof attached below
Слава Украине!!!
can the mods move this to the moto e6s forum so we can spread the news?
luridphantom said:
can the mods move this to the moto e6s forum so we can spread the news?
Click to expand...
Click to collapse
I took the first firmware I got to try from here: https://4pda.to/forum/index.php?showtopic=892755
but the firmware itself is everywhere, for example here:
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
DeveloperLuke Roms - Browse /GSIs at SourceForge.net
sourceforge.net
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
You can try to sew any GSI arm64 a/b from anywhere you find and choose the one you like, because smart supports Project Treble.
If you like one and will look cool and work firmware, post links here!
Tested it and it worked! Thanks a lot!
Now looking for delevoping some roms to this device
Im having a little problem, i tried to flash a GSI with "fastboot -u flash system gsi.img", the device didn't boot. Then i tried to flash the stock with the SP Flash Tool, and i throws an error (status_sec_dl_ forbidden), then i flashed it with Lenovo Rescue and Smart Assistant. I tried to flash via fastboot the patched magisk image but it throws an signature error.
Any help? Tha device still says that is unlocked
refrigerador67 said:
Im having a little problem, i tried to flash a GSI with "fastboot -u flash system gsi.img", the device didn't boot. Then i tried to flash the stock with the SP Flash Tool, and i throws an error (status_sec_dl_ forbidden), then i flashed it with Lenovo Rescue and Smart Assistant. I tried to flash via fastboot the patched magisk image but it throws an signature error.
Any help? Tha device still says that is unlocked
Click to expand...
Click to collapse
did you use the auth file that comes with sp flash tool? without that your device wont boot properly
Yes, i used the correct download agent and auth file
interesting, i followed all his steps and had no problem rooting it. try backtracking with his scripts again?
Solved it, also me and a developer are working on a new, more simple and automated script. Still haven't figured out how to flash the lk via script.
When is done i will post a complete guide in the moto e6s forums on how to do it, i think it might work well, but i would have to test in a non-unlocked device
Can someone please make a video with explanation, I didn't understand very well what is done, so I won't touch anything, but I thank those who record a video explaining it to me (I'm Brazilian)
Here you have a more straight forward guide, note that is still in testing
[GUIDE] How to unlock bootloader on E6s
Hello, in this guide i will show you how to unlock the bootloader on Moto E6s ;) (Sadly for now this guide is Windows only) CAUTION You are doing this AT YOUR OWN RISK! I will NOT take responsibility if you brick your device! Also, remember to...
forum.xda-developers.com
Excuse my ignorance, do you think it is compatible for the XT2053-5 model?
cannot use fastboot flash boot magiskboot.img
sign failed
partition flash is not allowed
hey is the moto e6+ twrp work on e6s
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Steps to Install Pixel Experience Plus GSI Android 13 on Samsung Galaxy S20 SCG01 Japan
Note: I am not the Developer I am sharing…
-Almost everything,
Fingerprint Working
Face unlock not Working only on A13
Phh setting Qualcomm Enable (use alternative audio policy ) unleash the power of snapdragon Audio Clarity for Music Lover
DON'T FLASH GAPPS, ALREADY INCLUDED
Download Links
Odin https://www.odinflash.com/download
TWRP Recovery TWRP 3.7.0_12
Vbmeta_disabled Download
Pixel Experience GSI Download full https://github.com/ponces/treble_build_pe/releases
Magisk Download
Unlock the bootloader
1. Go to your phone's settings
2. Scroll down and click on the "About phone" section
3. Click on "Software information"
4. Tap on the build number several times until you see a message saying "Developer mode has been turned on"
5. Go back to the settings homepage
6. Scroll down to the very bottom and select the "Developer options" section
7. Enable the "OEM unlocking" option
8. Scroll down and enable the "USB Debugging" Option
9. Connect your phone to your computer with a USB cable
10. Turn off your phone
12. Connect Use to only in PC press volume up + volume down at the same hold same time now connect C port to Phone
13. When you see the blue "Warning" screen, long press the volume up button to unlock bootloader
14. After the reset, start a new device setup and connect only to the internet skip all.
15.Enable Developer option if you can see Bootloader unlock tick Now good to go.
Install TWRP Custom Recovery
16. Open Odin
17. Uncheck auto reboot in Odin and flash TWRP in AP slot and vbmeta_disabled.tar in USERDATA Start Flash. (If failed you are not connected internet after Unlocked Bootloader so Follow up 14)
18.Hold volume down and power until the screen goes black then immediately switch to holding volume up and power to reboot into TWRP.
19.Go to Advanced > Terminal, type: multidisabler. (You will see " - Finished." When it is done.)
20.Go to wipe, format data, and type "yes" to confirm.
21.go Back Select "Dalvik / ART Cache" "Data" and "Cache”.
21. Reboot to TWRP
Install Pixel Experience GSI
22. Extract Pixel Experience file now you can see IMG file change name to system.img
23. Copy the system.img and Magisk files to internal storage.
24. TWRP Click Install and down below you can see INSTALL IMAGE choose system.img path is System.
25. Flash Magisk and reboot.
79. Set-up your new ROM !!
ENJOY !!!
To fix safty net (very important) no ned to flash any file.
1. flash magisk after reboot update the magisk and hide magisk manage reboot.
2. Now enable zysik in magisk setting choose play store and play services clear data for both reboot bhammmmm your safetynet is fixed.
SCREEN SHOT
To avoid any confusion between this and full ROMs that include kernels, I have changed the title of your post to appropriately reflect that this is a GSI.
Thanks.
Does this work on g986n
Does this work on g986n
DesrtSailor said:
Does this work on g986n
Click to expand...
Click to collapse
You can try it's an GSI ROM. use this recovery for your Model
https://androidfilehost.com/?w=files&flid=316866
Great one bro. Will VOLTE & all the functions in camera works?
There are 3 versions of gsi available. Normal, lite, vndklite. Which one we need to flash?
Pixel Experience GSI download requires authorization
please post the kernel version screen shot.
psychem said:
please post the kernel version screen shot.
Click to expand...
Click to collapse
bnskdd said:
Pixel Experience GSI download requires authorization
Click to expand...
Click to collapse
No Need any authorization Just download full rom i have tested with full rom only if you want you can check with Slim rom As well.
pratheepdx said:
No Need any authorization Just download full rom i have tested with full rom only if you want you can check with Slim rom As well.
Click to expand...
Click to collapse
Successfully swiped in, thank you for your contribution
High refresh rate working?
The updater function is not working.
Fingerprint sensor is not detecting finger, keeps saying lift and re touch again.
120 fps working finger print is working with latest firmware SCG01KDU1CVG3. try to flash latest stock firmware which is mentioned above and try again.
@pratheepdx bro I have installed the latest files as mentioned still fingerprint is not working. and when I go into the updater option it crashes for some reason. The fingerprint is very crucial and if possible please fix it..
Olink007 said:
@pratheepdx bro I have installed the latest files as mentioned still fingerprint is not working. and when I go into the updater option it crashes for some reason. The fingerprint is very crucial and if possible please fix
Click to expand...
Click to collapse
Do you have tempered glass for your screen or something else? its happens to me as well even with Stock Firmware once removed the issue was resolved for me I've verified that the Pixel GSI Android 13 Fingerprint works without any issue and Android 12 GSI Face Unlock and fingerprint both function flawlessly.
Does this work on s20 ultra snapdragon G9880 ?
Does it support Adaptive brightness? cause I can't find it in the settings.
paazoka said:
Does this work on s20 ultra snapdragon G9880 ?
Click to expand...
Click to collapse
If your bootloader unlockable of course this GSI will work. Try at your own risk.