Related
Hello all togerher, as I promised you, I'm beginning here with my own custom kernel
IF YOU FOLLOW MY STEPS BELOW, YOU WILL LOSE YOUR WARRANTY, KNOX WILL DISPLAY 0x1! I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE!
Features of this Kernel:
- Built with latest Linaro Toolchain 5.3 GNU GCC made by ME , Cortex A15 tuned
- Latest Linux version 3.10.101, is always up to date
- Vibration strength and wake lock can be blocked threw kernel adiutor
- crc disabled (30% more performance)
- cfs/nfs/cdrom support built in
- Choose between different CPU governors: Interactive, Arteractive, Ondemand, Conservative, Userspace, Performance, Powersave, bioshock, lionheart, alucard, barry_allen, blu_active, cafactive, darkness, despair, electroactive, electrodemand, HYPER, intellidemand, intelliactive, interactive_x, intellimm, nightmare, ondemandplus, ondemand_x, pegasusq, smartassV2, smartmax, smartmax_eps, umbrella_core, yankactive, zzmoove
- CPU OC/UC AND GPU OC/UC
- MANY DIFFERENT HOTPLUGS: bricked_hotplug, zen decision, autosmp, thunderplug, msm_hotplug, intelli_plug, alucard_hotplug, mako_hotplug and blu_plug
- FauxSound V3.6 build in
- KCAL control for full control about your screen!
- Qcald v2 build in with a more updated version than samsungs stock kernel!
- Frandom support
- Voltage Control
- State Notifier included
- updated wireless drivers
- Adreno Idler build in
- Simple ondemand gpu
- Task's ADJ tree for better LMK
- Power_efficient_wq for better battery management
- CPU-Boost updated to work with state notifier (and add hotplug boost)
- Built with latest ramdisk sources from samsung (BOL1)
- Kernelsource from latest Update BOK2
- I/O schedulers: ROW (default), CFQ, Noop, deadline, test-iosched, BFQ-Iosched, fiops, sio, VR, zen, fifio, sioplus, tripndroid
- UKSM (Ultra-Kernel Samepage Merging)
- Init.d Support
- Busybox support
- Charging Control/ Fast Charge
- Allow ADB-Insecure
- ASYNC FSync from HTC
- Toggle to enable/disable fsync
- updated lowmemorykiller with better memory management
- TCP (Network) control: Cubic (default), Reno, Bic, Westwood, Highspeed, Hybla, HTCP, Vegas, Veno, Scalable, LP, Yeah and Illinois
- SeLinux is set to permissive
- restrict rooting and tima disabled
Download:
V1.3 online
Bugs/Problems:
- None
Instructions:
If you want to install the Kernel, follow this:
1. Install a custom recovery for your phone, like this one here:TWRP Recovery
2. Follow the instructions on the page above, until you get a working recovery
3. Download the Kernel from below and copy it to your external SD Card
4. Reboot to your recovery by pressing volume up, home button and power button at the same time.
5. Install zip/select the kernel
6. Wipe cache and dalvik cache (recommand)
7. Reboot
Support:
If you like my work, please hit a thanks down on my posts. A thanks is enough!:highfive: If you really really really really really like my work, you can donate something to me, but it is not necessary. I created a paypal account, just in case, someone would give me a small donation. :good:
As I said, you don't have to give me something, but this keeps me motivated to built better Kernels and keep updating everything. It's your choice, and I'm very thankfull for every donation! No matter how big it is! Thank you so much for supporting me, cheers and have a nice day :fingers-crossed:
Credits/Thanks:
- Samsung for sources
- @faux123 for all the great stuff he did for the kernels
- @Yank555
- @dorimanx!
- @neobuddy83
If you want to take my work and need it somewhere, or do other things with it, please ask me first for the permission. Otherwise you are not allowed to take it! Thank you !
XDA:DevDB Information
StockKernel kccat6, ROM for the Samsung Galaxy S5
Contributors
Tkkg1994
Source Code: https://github.com/Tkkg1994/StockKernel
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Current Stable Version: V1.4
Stable Release Date: 2016-04-18
Created 2016-03-21
Last Updated 2016-09-15
Changelog:
Changelog V1.1:
- Initial release!
Changelog V1.1:
- Added kcal control with all upates(Kernel adiutor)
- Added OC and UC for GPU (166 to 800 MHz)
- Added OC and UC for CPU (268 until 2880 MHz)
- Added faux sound version 3.7
- Added frandom support
- Added voltage control
- Added bricked_hotplug, zen decision, autosmp, thunderplug, msm_hotplug, intelli_plug, alucard_hotplug, mako_hotplug and blu_plug
Changelog V1.2:
- cpufreq: cpu-boost: export input_boost_enable to userspace
- msm: thermal: add a module param to change the thermal throttle temperature point to userspace
- input: add generic touch event listener
- cpufreq: Introduce new relation for freq selection
- cpufreq: Break out early when frequency equals target_freq
- fs: sync: Asynchronous Fsync from HTC
- fs/sync: Make sync() satisfy many requests with one invocation
- fs: fsync: add a toggle to enable or disable fsync() operations
- sync: don't block the flusher thread waiting on IO
- Writeback: Fix occasional slow sync and some other fixes to writeback
- readahead: make context readahead more conservative
- update cfq iosched
- added back all governors from novakernel (over 30 governors build in the kernel now)
- added all ioscheds back and tuned them
- updated lowmemorykiller with some mods
Changelog V1.3:
- a lot of script updates/optimisations of the makefile
- lz4 Ramdisk supported
- cifs supported
- nfs supported
- cd-rom format supported
- stackprotecter updated
- kernel mode neon included
- implement state notifier to dcache
- vibration control added, control with kernel adiutor
- Sysfs interface to Enable/Disable CRC (crc disabled means 30% more performance)
- power updates
- led, blinking support
- usb: gadget: mass_storage: added sysfs entry for cdrom to LUNs
- rbtree updates
Changelog V1.4:
- fix drivedroid
- update cpufreq (many updates)
- added support for ntfs read and write
- updated hotplug drivers
- more things I may forgot
Reserved
It will working on NovaRom 1.5.5 or only StockRom?
DienoX said:
It will working on NovaRom 1.5.5 or only StockRom?
Click to expand...
Click to collapse
Should work on both
Sent with my Nova powered SM-G901F
More to come: differnet hotplugs, Sound control, kcal control and governors!
Sent with my Nova powered SM-G901F
Hi and thanks !
But still no deep sleep after speedtest, someone with the same problem ?
Thanks for the job ! Great kernel !
Envoyé de mon SM-G901F en utilisant Tapatalk
Hi, will it work on G906 models?
I have a problem with his headphones, there are sizzling . StockRom & stockkernel
Envoyé de mon SM-G901F en utilisant Tapatalk
CPU boost
Using Nova 1.5.5.So with Kernel Aduitor,is it right to enable CPU boost with all 4 cores to the maximum value (2457),or not?(Installed v1.0 using Philz Recovery.Phone seems to run better and faster than Guyver 0.9).
PhilCapron said:
Using Nova 1.5.5.So with Kernel Aduitor,is it right to enable CPU boost with all 4 cores to the maximum value (2457),or not?(Installed v1.0 using Philz Recovery.Phone seems to run better and faster than Guyver 0.9).
Click to expand...
Click to collapse
first: it's ok to run all 4 cores set on max value with all governors except performance
second: how did you figure it runs better and faster than Guyver's 0.9? There's no freakin' way !!!
the only kernel that runs better than Guyver's is @Tkkg1994 custom kernel witch is still in progress and we all wait for a stable version
artaniss11k said:
first: it's ok to run all 4 cores set on max value with all governors except performance
second: how did you figure it runs better and faster than Guyver's 0.9? There's no freakin' way !!!
the only kernel that runs better than Guyver's is @Tkkg1994 custom kernel witch is still in progress and we all wait for a stable version
Click to expand...
Click to collapse
Antutu scores are higher with this Kernel than 0.9,FWIW.
PhilCapron said:
Antutu scores are higher with this Kernel than 0.9,FWIW.
Click to expand...
Click to collapse
Antutu with Guyver's kernel: 76.792
Antutu with Tkgg1994's custom OC kernel : 79.535
What's your score with the stock one?
artaniss11k said:
Antutu with Guyver's kernel: 76.792
Antutu with Tkgg1994's custom OC kernel : 79.535
What's your score with the stock one?
Click to expand...
Click to collapse
Not getting those numbers with stock or guyver.
62 with 0.9.64 with v1.0.
Changelog V1.1:
- Added kcal control with all upates(Kernel adiutor)
- Added OC and UC for GPU (166 to 800 MHz)
- added OC and UC for CPU (268 until 2880 MHz)
- Added faux sound version 3.7
- added frandom support
- added voltage control
- Added bricked hotplug, zen decision, autosmp, thunderplug, msm_hotplug, intelli_plug, alucard_hotplug, mako_hotplug and blu_plug
- Some things I may forgot
for full changelog visit here: Kernel commits
download on the first page, second post
I have a problem with headphones, there are sizzling . StockRom v1.0 & stockkernel v1.0 & v1.1 too.
With StockRom built in kernel haven't problem.
Agadoo said:
I have a problem with headphones, there are sizzling . StockRom v1.0 & stockkernel v1.0 & v1.1 too.
With StockRom built in kernel haven't problem.
Click to expand...
Click to collapse
Same problme here.
Envoyé de mon SM-G901F en utilisant Tapatalk
netsba said:
Same problme here.
Envoyé de mon SM-G901F en utilisant Tapatalk
Click to expand...
Click to collapse
Agadoo said:
I have a problem with headphones, there are sizzling . StockRom v1.0 & stockkernel v1.0 & v1.1 too.
With StockRom built in kernel haven't problem.
Click to expand...
Click to collapse
netsba said:
I have a problem with his headphones, there are sizzling . StockRom & stockkernel
Envoyé de mon SM-G901F en utilisant Tapatalk
Click to expand...
Click to collapse
What do you mean with 'sizzling'?
I didn't notice anything different sound whise.
If you can explain to me what is happening while listening to music I can maybe help
Sent with my Nova powered SM-G901F
Without headphones I have a normal sound. With the headphones I have a very active and annoying background noise
Envoyé de mon SM-G901F en utilisant Tapatalk
@Tkkg1994
this v1.1 of the stock kernel is the stable version of your famous and long awaited custom kernel ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
If you get bootloop click here
Summary CrazySuperKernel is a powerfull kernel with a lot super features!
If you got any bug use the report bug tab or press HERE and upload the log,WITHOUT LOGS THERE IS NO BUG!
I m not a magician and i havn't got the device to do it on my own without spend your time.
INDEX
POST 1
-Imprtant info
-Report bug with Logs
-Features
-Dowload link
-Donator
-Credits
POST 2
-Recommended kernel tweaker tools
-Changelogs
POST 3
-Bootloop fix
POST 4
-Zzmoove profiles
Features
OTA Updates:
- OTA Updates from Kernel Adiutor app(coming soon)
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazySuperKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazySuperKernel over the kernel that came with your ROM!!)
Kernel tweaker app:
- CrazySuperKernel Adiutor included!
Toolchain:
DF 4.9 Toolchain [latest update]
CPU:
- governors:
crazyactive(my governor:balance governor for great battery life and performance based on interactive)
interactive
impulse
ondemand
smartmax
zzmoove
ondemandplus
pegasusq
nightmare
conservative
lionheart
powersave
userspace
yankactive
smartmax_eps
intellidemand
intelliactive
- MSM Limiter
- input boost
- state notifier
- overclock/underclock
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
zen
vr
fifo
TCP congestion controls:
cubic
bic
westwood
htcp
highspeed
hybla
reno
bic
hybla
vegas
lp
yeah
illinois
scalable
- tcp congestion changed to Westwood
GPU:
- governors:
msm-adreno-tz
simple_ondemand
powersave,performance
userspace
cpubw_hwmon
msm_cpufreq
- Adreno idler
- simple gpu algorithm
Thermal control:
- Intelli thermal v2
Hotplug:
- Disabled MP Decision hotplug
- Enabled Bricked Hotplug
- Prevent wakelock when ambiend display disabled(misc control tab)
Sound:
- Faux sound updated and fixed
More:
- Kernel runs with SELinux permissive by default
- init.d support
- insecure kernel (adb has root privileges)
- Frandom support
- Disabled Arch Power
- CRC Check Disabled
- Gentle Fair Sleepers (Disabled by default)
- Enabled All Suspend and Idle Modes
- Power Suspend Mode/State
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Find this thread helpful? Hit the Thanks button!
The speed of future releases will be based on thanks. 39k views, 400 downloads and only 19 thanks... I won't be rushing anything.
Feeling extra generous and wanna help me more? Click my name at the top of any post and hit donate or click here the donation button
Download Link CrazySuperKernel [AnyKernel]:https://www.androidfilehost.com/?w=files&flid=138269
Download Link CrazySuperKernelAdiutor[Updated]:https://www.androidfilehost.com/?w=files&flid=139961
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazySuperKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazySuperKernel !!!!
Donators
fbs
Credits
thx Showp1984
thx Faux123
thx Savoca
thx RenderBroken
thx Neobuddy
thx Myfluxi
thx FranciscoFranco
thx SultanXDA
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx yank555
thx apb_axel
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazySuperKernel, Kernel for the Samsung Galaxy S5
Contributors
CrazyGamerGR
Source Code CrazySuperKernel: https://github.com/CrazyGamerGR/CrazySuperKernel-CM14.1-KLTE-New-rebase
Kernel Special Features: check the feature list
Version Information
Status: Testing
Current Stable Version: Weekly
Stable Release Date: 2016-12-24
Current Beta Version: Daily
Beta Release Date: 2016-11-12
Created 2016-10-22
Last Updated 2016-12-24
FAQ
Recommended app : CrazySuperKernel Adiutor(included)
changelogs
v1/22-10-16
- initial release
v2/22-10-16
- upstream updates from cyanogenmod
- added intelli thermal v2
v3/07-11-16
- upstream updates from cyanogenmod
- Anykernel update
- deleted many hotplugs
v4/09-11-16
- upstream updates from cyanogenmod
- Anykernel update
- removed slim governor
- removed intellimm governor
v5/10-11-16
- removed many unstable governors
- clean up some files
- bug fixes
v6/11-11-16
- fixed recent SafetyNet failure,you can use Android Pay again (thx Sultanxda)
- Anykernel update
- Anykernel clean up
v7/12-11-16
- upstream updates from cyanogenmod
v8/13-11-16
- many fixes under the hood
v9/14-11-16
- big anykernel update
-removed uksm (battery drain fixed)
-insecure kernel (adb has root privileges)
v10/17-11-16
-init.d support
-simple ondemand gpu governor update
-msm adreno tz governor update
-tap2wake update
-kcal update
-touch boost update
-cpu boost update
-touchkey control update
-conservative gpu gov removed
-some fixes
-some useless features removed
v11/17-11-16
- upstream updates from cyanogenmod
v12/22-11-16
- upstream updates from cyanogenmod
- added crazyactive(my governor[info:balance governor for great battery life and performance based on interactive])
- added updated UKM(synapse) in anykernel
- anykernel update for better nougat compatibility
v13/10-12-16
- anykernel big updates
- upstream updates from cyanogenmod
- disabled completly mpdecision
- enabled updated bricked hotplug
- script with many set up for kernel features included in anykernel zip
- added led tab in synapse
- fixed many synapse bugs
- removed wake functions
- removed touch boost and cpu boost
- faux sound updated
- deleted unstable hotplugs
- fixed many bugs
- battery improve
- performance improve
- some feature fixed
- many improvments under the hood
v14/24-12-16
- synapse update(thx GalaticStryder)
- anykernel fixes and update
- many features updated
- added input boost by Sultanxda
- added overclock
- added my underclock step
v15/25-12-16
- synapse fixes
- anykernel fixes
- faux sound update and fixes
v16/25-12-16
- faux sound fixes
- synapse fixes
v17/27-12-16
- added CrazySuperKernel Adiutor (included)
- removed slimbus overclock
- removed updated faux sound
- added stable faux sound
If you get bootloop or bootloop before samsung screen press volume up+down+power button until device vibrate and fast press power+volume up and device will be boot in recovery,instal your rom(dirty instal not need clean instal) and everything will be good^^.
If u use zzmove governor disable all the hotplugs coz it use its own hotplug as anyone knows.
Zzmove profiles
1 ) Default -> will set governor defaults -
2 )ybat -> Yank Battery -> a very good battery/performance balanced setting - DEV-NOTE: highly recommended! -
3 )ybatext-> Yank Battery Extreme -> like yank battery but focus on battery saving -
4 )zzbat-> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving -
- DEV-NOTE: might give some lags! -
5 )zzbatp -> ZaneZam Battery Plus -> NEW! reworked faster battery setting -
- DEV-NOTE: recommended too!
6 )zzopt -> ZaneZam Optimized -> balanced setting with no focus in any direction -
- DEV-NOTE: relict from back in the days, even though some people still like it! -
7 )zzmod -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online -
8 )zzperf -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast -
- down scaling/hotplugging behaving -
9 )zzinz-> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience! -
10 )zzgame-> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay -
reserve 1
reserve 2
Thanks man. Going to try it out.
Works great!!!! Thank you!!!!!!
heshan_1010 said:
Works great!!!! Thank you!!!!!!
Click to expand...
Click to collapse
Thank you for the feedback
Eta: intelli thermal added and now i ll upstream it and i ll upload new version soon!
Good to see your kernel for the rom
Sent from my SM-G900M using XDA-Developers mobile app
After Lord Boeffla will quit kernel development for the S5 after MM it is very good to see you developing for CM14, very appreciate it
Regards
Gesendet von meinem SM-G900F mit Tapatalk
HAJT669 said:
Good to see your kernel for the rom
Click to expand...
Click to collapse
I ll continue for many more months for this device.
j1gga84 said:
After Lord Boeffla will quit kernel development for the S5 after MM it is very good to see you developing for CM14, very appreciate it
Regards
Gesendet von meinem SM-G900F mit Tapatalk
Click to expand...
Click to collapse
I ll continue this project for the s5 for many more months and not only kernel,i hope i ll start building and a rom too soon.
New update is up!!
Intelli thermal added and upstream updates from cyanogenmod.
Any1 up to test oc cpu and uc in the next test build?
Test Kernel is here with oc/uc cpu and 27mhz gpu step
Download Link here: https://www.androidfilehost.com/?fid=529152257862669482
and new ukm test be careful not all settings are careful Download Link:https://www.androidfilehost.com/?fid=457095661767103515
Synapse Unistaller:https://www.androidfilehost.com/?fid=24591000424940110
CrazyGamerGR said:
Test Kernel is here with oc/uc cpu and 27mhz gpu step
Download Link here: https://www.androidfilehost.com/?fid=529152257862669482
and new ukm test be careful not all settings are careful Download Link:https://www.androidfilehost.com/?fid=457095661767103515
Synapse Unistaller:https://www.androidfilehost.com/?fid=24591000424940110
Click to expand...
Click to collapse
Hi I can't set any oc/uc cpu or the 27mhz GPU step with the actual test kernel v3. Kernel Auduitor(0.9.31.1) don't show them.
The rest seems to work fine .
Greetings Georg
schorsch.funke said:
Hi I can't set any oc/uc cpu or the 27mhz GPU step with the actual test kernel v3. Kernel Auduitor(0.9.31.1) don't show them.
The rest seems to work fine .
Greetings Georg
Click to expand...
Click to collapse
Thx for the feedback,27mhz step its just idle,ukm works?(synapse)
CrazyGamerGR said:
Thx for the feedback,27mhz step its just idle,ukm works?(synapse)
Click to expand...
Click to collapse
Kernel Adjustors say yes.
Full scans 4, pages shared 51, pages sharing 2613, pages unshared 823. This last 3 numbers are frequently changing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazySuperKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazySuperKernel over the kernel that came with your ROM!!)
Kernel tweaker app:
- CrazySuperKernel Adiutor (need download it from downloads)
Toolchain:
DF 4.9 Toolchain (linaro for d852) [latest update]
CPU:
- governors:
crazyactive(my governor:balance governor for great battery life and performance based on interactive)
interactive
impulse
ondemand
smartmax
zzmoove
ondemandplus
pegasusq
nightmare
conservative
lionheart
powersave
userspace
yankactive
smartmax_eps
intellidemand
intelliactive
- MSM Limiter
- input boost
- state notifier
- cpu voltage control
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
zen
vr
fifo
TCP congestion controls:
cubic
bic
westwood
htcp
highspeed
hybla
reno
bic
hybla
vegas
lp
yeah
illinois
scalable
- tcp congestion changed to Westwood
GPU:
- governors:
msm-adreno-tz
simple_ondemand
powersave,performance
userspace
cpubw_hwmon
msm_cpufreq
- Adreno idler
- simple gpu algorithm
Thermal control:
- Intelli thermal v2
Hotplug:
- Disabled MP Decision hotplug
- Enabled Bricked Hotplug
- Prevent wakelock when ambiend display disabled(misc control tab)
Sound:
- Faux sound updated and fixed
- Slimbus overclock
More:
- Kernel runs with SELinux permissive by default
- init.d support
- insecure kernel (adb has root privileges)
- fast charge
- kcal v2
- Frandom support
- Disabled Arch Power
- CRC Check Disabled
- Gentle Fair Sleepers (Disabled by default)
- Enabled All Suspend and Idle Modes
- Power Suspend Mode/State
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Supported Variants:
D850
D851
D852
D855
F400
LS990
VS985
Download Link CrazySuperKernel [AnyKernel]:https://www.androidfilehost.com/?w=files&flid=136880
Download Link CrazySuperKernelAdiutor[Updated]:https://www.androidfilehost.com/?w=files&flid=139961
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazySuperKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazySuperKernel !!!!
Credits
thx Showp1984
thx Faux123
thx Savoca
thx RenderBroken
thx Neobuddy
thx Myfluxi
thx FranciscoFranco
thx SultanXDA
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx yank555
thx apb_axel
thx Omar-Averal for bump and anykernel
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazySuperKernel, Kernel for the LG G3
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazySuperKernel-CM14.1-LG-G3
Kernel Special Features: check the feature list
Version Information
Status: Stable
Created 2016-12-17
Last Updated 2016-12-25
FAQ
Recommended app : CrazySuperKernel Adiutor
changelogs
v1.0/17-12-16
- initial release
v2.0/17-12-16
- Anykernel clean up
- Update synapse
- Msm limiter update for 2.5ghz
- some tweaks under the hood
v3.0/18-12-16
- Fix Synapse
v4.0/19-12-16
- Synapse update
- fix anykernel and bump
- update anykernel
- many tweaks
v5.0/20-12-16
- Synapse fixes
v6.0/24-12-16
- Synapse update(thx GalaticStryder)
- many anykernel fixes and update
- many fixes
- a lot improvments under the hood
v7.0/25-12-16
- anykernel fixes
- add cpu voltage control
- add kcal v2
- some fixes
v8.0/27-12-16
- CrazySuperKernel Adiutor (included)
- anykernel fixes
- removed updated faux sound
- added stable faux sound
- many fixes under the hood
v9.0/31-12-16
- added fast charge
- deleted included CSKAdiutor (need download it)
- many fixes
If u use zzmove governor disable all the hotplugs coz it use its own hotplug as anyone knows.
[Q]How i select profile from kernel tweaker app?
[A]You need to go in governor tunable-profile number and select the number of the profile from the list.
Zzmove profiles
1 ) Default -> will set governor defaults
2 )ybat -> Yank Battery -> a very good battery/performance balanced setting - DEV-NOTE: highly recommended!
3 )ybatext-> Yank Battery Extreme -> like yank battery but focus on battery saving
4 )zzbat-> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving - DEV-NOTE: might give some lags!
5 )zzbatp -> ZaneZam Battery Plus -> NEW! reworked faster battery setting - DEV-NOTE: recommended too!
6 )zzopt -> ZaneZam Optimized -> balanced setting with no focus in any direction - DEV-NOTE: relict from back in the days, even though some people still like it!
7 )zzmod -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online
8 )zzperf -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast - down scaling/hotplugging behaving
9 )zzinz-> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience!
10 )zzgame-> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay
reserve 1
reserve 2
So far so good .
Cortex A72 said:
So far so good .
Click to expand...
Click to collapse
Cool^^
v2.0 coming soon!
- Anykernel clean up
- Update synapse
- Msm limiter update for 2.5ghz
- some tweaks under the hood
LS990 failed to flash. On AICP Rom with stock kernel for same. Looking forward to a custom kernel...really appreciate the work.
Crazy thing, your kernel is installed according KA mod.
Again, really appreciate your work on this.
Q: Is Thermal Control applied? You know, like adjusting throttle temps and stuff...
Wouls like to try this on my D850 running LP, but would like to ask that first, since it's quite important on my side, which always play HD games, and can't afford early throttling on 60C temps...
:good:
seanskiT! said:
LS990 failed to flash. On AICP Rom with stock kernel for same. Looking forward to a custom kernel...really appreciate the work.
Crazy thing, your kernel is installed according KA mod.
Again, really appreciate your work on this.
Click to expand...
Click to collapse
You instaled v1 or v2?
souler456 said:
Q: Is Thermal Control applied? You know, like adjusting throttle temps and stuff...
Wouls like to try this on my D850 running LP, but would like to ask that first, since it's quite important on my side, which always play HD games, and can't afford early throttling on 60C temps...
:good:
Click to expand...
Click to collapse
Sure it has intelli thermal v2 but this is only for nougat caf roms.
CrazyGamerGR said:
Sure it has intelli thermal v2 but this is only for nougat caf roms.
Click to expand...
Click to collapse
V1...but all is good. Even though I got the error, it is installed and running well so far. Gonna get v2.
CrazyGamerGR said:
Sure it has intelli thermal v2 but this is only for nougat caf roms.
Click to expand...
Click to collapse
But AnyKernel is applied, yes? So, it should be compatible with at least MM, isn't that right?
:good:
seanskiT! said:
V1...but all is good. Even though I got the error, it is installed and running well so far. Gonna get v2.
Click to expand...
Click to collapse
Its synapse bug i ll fix it now and i ll upload it
souler456 said:
But AnyKernel is applied, yes? So, it should be compatible with at least MM, isn't that right?
:good:
Click to expand...
Click to collapse
It should work but it will have more changes than mm.
New update is up!
- Fix Synapse
CrazyGamerGR said:
New update is up!
- Fix Synapse
Click to expand...
Click to collapse
I downloaded 2.0 buy synapse still not working bro, running on d855
Nvm! I see what's up
Does kernel have thermal control?
Likkleskip said:
I downloaded 2.0 buy synapse still not working bro, running on d855
Click to expand...
Click to collapse
V3.0 include the synapse bro,it will be up in 1minute.
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
If you get bootloop click here
Summary CrazyAquaKernel is a powerfull kernel with a lot super features!
If you got any bug use the report bug tab or press HERE and upload the log,WITHOUT LOGS THERE IS NO BUG!
I m not a magician and i havn't got the device to do it on my own without spend your time.
INDEX
POST 1
-Imprtant info
-Report bug with Logs
-Features
-Dowload link
-Donator
-Credits
POST 2
-Recommended kernel tweaker tools
-Changelogs
POST 3
-Bootloop fix
POST 4
-Zzmoove profiles
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazyAquaKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazyAquaKernel over the kernel that came with your ROM!!)
Toolchain:
Google GCC 4.9 Toolchain
CPU:
- governors:
crazyactive(my governor:balance governor for great battery life and performance based on interactive)
interactive
impulse
ondemand
smartmax
zzmoove
ondemandplus
pegasusq
nightmare
conservative
lionheart
powersave
userspace
yankactive
smartmax_eps
intellidemand
intelliactive
- Freq Limiter
- input boost
- overclock/underclock
IO schedulers:
tripndroid
cfq
noop
deadline
fiops
row
sio
zen
vr
fifo
TCP congestion controls:
cubic
bic
westwood
htcp
highspeed
hybla
reno
bic
hybla
vegas
lp
yeah
illinois
scalable
- tcp congestion changed to Westwood
GPU:
- governors:
msm-adreno-tz
simple_ondemand
powersave,performance
userspace
cpubw_hwmon
msm_cpufreq
- simple gpu algorithm
Thermal control:
- Intelli thermal v2
Sound Control
- Faux sound
Hotplug:
- Disabled MP Decision hotplug
- Enabled Bricked Hotplug
- Prevent wakelock when ambiend display disabled(misc control tab)
More:
- Kernel runs with SELinux permissive by default
- init.d support
- insecure kernel (adb has root privileges)
- Frandom support
- Power Suspend Mode/State
- A lot improvments
- A lot fixes
Find this thread helpful? Hit the Thanks button!
The speed of future releases will be based on thanks. 39k views, 400 downloads and only 19 thanks... I won't be rushing anything.
Feeling extra generous and wanna help me more? Click my name at the top of any post and hit donate or click here the donation button
Download Link CrazyAquaKernel [AnyKernel]:https://www.androidfilehost.com/?w=files&flid=207124
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazyAquaKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazyAquaKernel !!!!
Credits
thx Showp1984
thx Faux123
thx Savoca
thx RenderBroken
thx Neobuddy
thx Myfluxi
thx FranciscoFranco
thx SultanXDA
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx yank555
thx apb_axel
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazyAquaKernel, Kernel for the Samsung Galaxy S5
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazyAquaKernel-klte-los
Kernel Special Features:
Version Information
Status: Beta
Created 2017-08-16
Last Updated 2017-08-16
[KERNEL][SM-G900XX][CM13/CM14.1]CrazyAquaKernel v1[16-08-17]
FAQ
Recommended app : Kernel Adiutor
changelogs
v1/16-08-17
- initial release
v2/6-9-17
- rebase kernel with latest los updates
- add faux sound
- google gcc 4.9 toolchain
- many fixes
If you get bootloop or bootloop before samsung screen press volume up+down+power button until device vibrate and fast press power+volume up and device will be boot in recovery,instal your rom(dirty instal not need clean instal) and everything will be good^^.
[KERNEL][SM-G900XX][LOS13/LOS14.1]CrazyAquaKernel v1[16-08-17]
If u use zzmove governor disable all the hotplugs coz it use its own hotplug as anyone knows.
[Q]How i select profile from kernel tweaker app?
[A]You need to go in governor tunable-profile number and select the number of the profile from the list.
Zzmove profiles
1 ) Default -> will set governor defaults
2 )ybat -> Yank Battery -> a very good battery/performance balanced setting - DEV-NOTE: highly recommended!
3 )ybatext-> Yank Battery Extreme -> like yank battery but focus on battery saving
4 )zzbat-> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving - DEV-NOTE: might give some lags!
5 )zzbatp -> ZaneZam Battery Plus -> NEW! reworked faster battery setting - DEV-NOTE: recommended too!
6 )zzopt -> ZaneZam Optimized -> balanced setting with no focus in any direction - DEV-NOTE: relict from back in the days, even though some people still like it!
7 )zzmod -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online
8 )zzperf -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast - down scaling/hotplugging behaving
9 )zzinz-> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience!
10 )zzgame-> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay
reserve1
reserve2
Thank you, good to see you back.
Drhedphuk said:
Thank you, good to see you back.
Click to expand...
Click to collapse
I promised it m8 and i m back, i never give up my dreams
CrazyGamerGR said:
I promised it m8 and i m back, i never give up my dreams
Click to expand...
Click to collapse
Good for you.
[KERNEL][SM-G900XX][CM13/CM14.1]CrazyAquaKernel v1[16-08-17]
saif hussain said:
Hallo dev
R u patch your tbis aweaome kernel for kali nethunter support for klteduas
Plz reply m waiting for u
Click to expand...
Click to collapse
It should be work with any rom because of the anykernel but need test because i updated the anykernel zip or you mean to include the kali nethunter features?
[KERNEL][SM-G900XX][CM13/CM14.1]CrazyAquaKernel v1[16-08-17]
saif hussain said:
Yes bro plz add kali nethunter support
Click to expand...
Click to collapse
Maybe soon i ll try but i don't have much time because i have other devices to create kernels too
saif hussain said:
Click to expand...
Click to collapse
What rom are you use?
saif hussain said:
Skies rom 3.1
Click to expand...
Click to collapse
You tried the crazyaqua kernel?
Crazyaqua is working well my friend.
Drhedphuk said:
Crazyaqua is working well my friend.
Click to expand...
Click to collapse
Thx for the feedback m8
CrazyGamerGR said:
Thx for the feedback m8
Click to expand...
Click to collapse
working very well on the g900v , but i have a question : will this new kernel have undervolting and overvolting feature?
KazuDante said:
working very well on the g900v , but i have a question : will this new kernel have undervolting and overvolting feature?
Click to expand...
Click to collapse
I will add this feature in the next build m8
Thanks for the kernel but on stock based rom of xXx developer phone restarted all over
NecromantiA said:
Thanks for the kernel but on stock based rom of xXx developer phone restarted all over
Click to expand...
Click to collapse
I don't have time to support stock rom i just create kernels for LineageOS/Cyanogenmod
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazyAquaKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazyAquaKernel over the kernel that came with your ROM!!)
Toolchain:
UBERTC 4.9 Toolchain
CPU:
- governors:
crazyactive(my governor:balance governor for great battery life and performance based on interactive)
interactive
impulse
ondemand
smartmax
zzmoove
ondemandplus
pegasusq
nightmare
conservative
lionheart
powersave
userspace
yankactive
smartmax_eps
intellidemand
intelliactive
- MSM Limiter
- input boost
- state notifier
- cpu voltage control
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
zen
vr
fifo
TCP congestion controls:
cubic
bic
westwood
htcp
highspeed
hybla
reno
bic
hybla
vegas
lp
yeah
illinois
scalable
- tcp congestion changed to Westwood
GPU:
- governors:
msm-adreno-tz
simple_ondemand
powersave,performance
userspace
cpubw_hwmon
msm_cpufreq
- Adreno idler
- simple gpu algorithm
Thermal control:
- Intelli thermal v2
Hotplug:
- Disabled MP Decision hotplug
- Enabled Bricked Hotplug
- Prevent wakelock when ambiend display disabled(misc control tab)
Sound:
- Faux sound updated and fixed
- Slimbus overclock
More:
- Kernel runs with SELinux permissive by default
- init.d support
- insecure kernel (adb has root privileges)
- fast charge
- kcal v2
- Frandom support
- Disabled Arch Power
- CRC Check Disabled
- Gentle Fair Sleepers (Disabled by default)
- Enabled All Suspend and Idle Modes
- Power Suspend Mode/State
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Supported Variants:
D850
D851
D852
D855
F400
LS990
VS985
Download Link CrazyAquaKernel [AnyKernel]:https://www.androidfilehost.com/?w=files&flid=207277
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazyAquaKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazyAquaKernel !!!!
Credits
thx Showp1984
thx Faux123
thx Savoca
thx RenderBroken
thx Neobuddy
thx Myfluxi
thx FranciscoFranco
thx SultanXDA
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx yank555
thx apb_axel
thx Omar-Averal for bump and anykernel
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazyAquaKernel, Kernel for the LG G3
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazyAquaKernel-g3-los
Kernel Special Features:
Version Information
Status: Beta
Created 2017-08-16
Last Updated 2017-08-16
FAQ
Recommended app : Kernel Adiutor
changelogs
v1.0/17-08-17
- initial release
If u use zzmove governor disable all the hotplugs coz it use its own hotplug as anyone knows.
[Q]How i select profile from kernel tweaker app?
[A]You need to go in governor tunable-profile number and select the number of the profile from the list.
Zzmove profiles
1 ) Default -> will set governor defaults
2 )ybat -> Yank Battery -> a very good battery/performance balanced setting - DEV-NOTE: highly recommended!
3 )ybatext-> Yank Battery Extreme -> like yank battery but focus on battery saving
4 )zzbat-> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving - DEV-NOTE: might give some lags!
5 )zzbatp -> ZaneZam Battery Plus -> NEW! reworked faster battery setting - DEV-NOTE: recommended too!
6 )zzopt -> ZaneZam Optimized -> balanced setting with no focus in any direction - DEV-NOTE: relict from back in the days, even though some people still like it!
7 )zzmod -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online
8 )zzperf -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast - down scaling/hotplugging behaving
9 )zzinz-> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience!
10 )zzgame-> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay
reserve1
reserve2
Thanks mate. Glad to see ya back. Will get it installed once I get home from work.
seanskiT! said:
Thanks mate. Glad to see ya back. Will get it installed once I get home from work.
Click to expand...
Click to collapse
Hey m8,i promised it i will come back
Looking forward to try this. I see it says cm13/cm14. Good, as I'm on cm13 based rom & I've already flashed a custom kernel I'll have to wait. I've read not to put custom on top of custom. But I'm a flash junkie. Thank you for this..........
Sent from my LG-ls990 using Tapatalk
u,u i found a bug. sometimes the charge process stop and i need to restart the phone to continue. After all this kernel runs well.
zihar said:
this kernel work on FlymeOs? u,u
Click to expand...
Click to collapse
Did you read the title of the thread? Is the ROM cm 13 or 14 based?
---------- Post added at 02:45 AM ---------- Previous post was at 02:44 AM ----------
CrazyGamerGR said:
Hey m8,i promised it i will come back
Click to expand...
Click to collapse
So far, running flawlessly. Thanks mate
seanskiT! said:
Did you read the title of the thread? Is the ROM cm 13 or 14 based?
---------- Post added at 02:45 AM ---------- Previous post was at 02:44 AM ----------
So far, running flawlessly. Thanks mate
Click to expand...
Click to collapse
flyme is bassed on cm 13 and the kernel works on it
Nice to see you back mate. Need more update with lot of new features. Thank you....
Dhana96 said:
Nice to see you back mate. Need more update with lot of new features. Thank you....
Click to expand...
Click to collapse
I will add soon m8
Thank you for the update! Have been using the kernel for the past day, been experiencing heating issues. Will post logs later if that will help..
IAM_TheFlash said:
Thank you for the update! Have been using the kernel for the past day, been experiencing heating issues. Will post logs later if that will help..
Click to expand...
Click to collapse
Logs are very helpfull the most times but heat issues i had with g3 without custom kernels too but you can try tune the intelli thermal settings and use other governor and freqs
Sent from my iPhone using Tapatalk Pro
After almost a week on this new kernel. No issues to report, smooth and excellent battery life using zzmove gov and profile 5. Thanks for your work on this kernel.
seanskiT! said:
After almost a week on this new kernel. No issues to report, smooth and excellent battery life using zzmove gov and profile 5. Thanks for your work on this kernel.
Click to expand...
Click to collapse
do you have a hotplug active while using zzmove_?
seanskiT! said:
After almost a week on this new kernel. No issues to report, smooth and excellent battery life using zzmove gov and profile 5. Thanks for your work on this kernel.
Click to expand...
Click to collapse
Thx for feedback m8
Sent from my iPhone using Tapatalk Pro
zihar said:
do you have a hotplug active while using zzmove_?
Click to expand...
Click to collapse
No, I don't
Quick question
Does this kernel work with the latest Fulmics ROM version 7.6, and would this help with the SD Card randomly unmounting problem?
Thanks