Hi, folks time to revive nexus one so im proud to present you the LineageOS 11.
Dependencies:
Nexus one
16 or more GB micro sd
4ext recovery
My Twrp
My Hboot (it allignes 1mb to system and data rest cache)
LineageOS11
Kernel
How to install ?
Boot to 4ext recovery and Partition your sdcard as fat32 as big as you wish extsd1 make it 1024mb and ext4 sdext2 make it 4096 or more
reboot to bootloader
flash boot with fastboot flash hboot hboot.img
boot to twrp recovery (this is sadly only tethered twrp so you need a computer everytime you wanna use it) boot it with fastboot boot recovery.img
goto wipe advanced wipe wipe data system cache and dalvik cache
put lineageos zip on your micro sd and flash it
reboot to bootloader once more and flash the kernel (it wont flash through twrp idk why) do it by write fastboot flash boot boot.img
type fastboot reboot and your nexus one will boot to LineageOS11
Credits:Me(J0SH1X),Spezi77(for his bravo kitkat+ device tree),Macs18Max(for giving me a fix for a bug i couldnt solve)
RESERVED
RESERVED2
How it works? Feels slow?
Does it have trackball wake? my power button is broken. Also, what gapps do you recommend?
danibus said:
How it works? Feels slow?
Click to expand...
Click to collapse
if you have an high class micro sd its blazing fast on my sandisk 16GB UHF class 10 card its faster then internal storage
J0SH1X said:
if you have an high class micro sd its blazing fast on my sandisk 16GB UHF class 10 card its faster then internal storage
Click to expand...
Click to collapse
Amazingly awesome. Its is very fast on a class 10 card. Recommended gapps ?
Also not able to access sd card from computer through usb cable. It is getting stuck at "USB mass storage".
vewa52 said:
Amazingly awesome. Its is very fast on a class 10 card. Recommended gapps ?
Also not able to access sd card from computer through usb cable. It is getting stuck at "USB mass storage".
Click to expand...
Click to collapse
i wasnt able to flash any gapps at all currently i think i will just include them in rom and yeah i noticed sdcard not working too i will look into it im currently working on lollipop i need to make it flash maybe we will have lp in some days from logs what i can see its about to boot but permissions are denied so it stuck on X
J0SH1X said:
i wasnt able to flash any gapps at all currently i think i will just include them in rom and yeah i noticed sdcard not working too i will look into it im currently working on lollipop i need to make it flash maybe we will have lp in some days from logs what i can see its about to boot but permissions are denied so it stuck on X
Click to expand...
Click to collapse
Understood. Thanks JOSH1X. I will play around to see whether there are any bugs.
Can you put some more detailed instructions up, or point me in a better direction to learn how to install this kind of stuff? I assume you would probably need the Android SDK and things. But please, don't feel like you have to go out of your way to help me. I can probably find out how on my own if need be.
Thanks for this awesome to see a legendary device revived :good:
lemmegetauhhhh said:
Can you put some more detailed instructions up, or point me in a better direction to learn how to install this kind of stuff? I assume you would probably need the Android SDK and things. But please, don't feel like you have to go out of your way to help me. I can probably find out how on my own if need be.
Click to expand...
Click to collapse
minimal adb and fastboot and universal adb driver by koush should be enough
liam_davenport said:
Thanks for this awesome to see a legendary device revived :good:
Click to expand...
Click to collapse
then be prepared for time when my main projects are done , lollipop already boots but nothing work
J0SH1X said:
then be prepared for time when my main projects are done , lollipop already boots but nothing work
Click to expand...
Click to collapse
Good luck I know the pain ahead
liam_davenport said:
Good luck I know the pain ahead
Click to expand...
Click to collapse
yeah me too but new project is a bit more important to me since nexus one i dont use it anymore im making aosp rom for my tablet
hi.i have a stupid question.can you make a tool for nexus one,something like the wugfresh.i try to resoft my N1,but i didn't succeed with my win10 running laptop.sorry fory noonb questio,maybe it's impossibile to make,but a try diffrent things,cables,port,pc,laptops,etc but it doesn't work.with respect tibi v.
I still have an old nexus one. What can i expect to work with lineageos11?
Would you consider porting this to htc desire? The resources over there are basically dead..., pretty sad though. Just want a rom that is updated with the lastest sources. Knowing that making a rom isn't easy so if you're busy than please just ignore me.
Nice work and sorry for the bothering!!
Thanks J0SH1X!! This SD-based ROM really brings the N1 back! Though it sometime FC or reboot, still it's much better and usable. Any plan to refine it sometime?
phhuang said:
Thanks J0SH1X!! This SD-based ROM really brings the N1 back! Though it sometime FC or reboot, still it's much better and usable. Any plan to refine it sometime?
Click to expand...
Click to collapse
im working on it right now i hope to make kernel3 compatible with n1 its possible since htc desire has it if kernel 3 works i will work on lineageos 13
Related
Warning: whether you preform these steps correctly or incorrectly, you may be left with a device which cannot be recovered to a previous state. Because this process operates on the recovery partition it leaves you with little room to recover if flashed incorrectly, especially if your normal Android mode doesn't boot.
(although realistically you can just flash ESPRIMG.zip from HBOOT to recover, or fastboot)
So here it is ladies and gentlemen: Clockwork 3.0.0.5, based on a git version pulled/compiled on January 6th, 2011 from the CyanogenMod 7.x (CM7) repository. So what's new? Nothing that I can tell! Not sure why it deserves version 3.x, but I guess changing the text color and background is considered a 'major upgrade'.
This is provided in .img format - NOT an update.zip format. That means you'll have to flash it to your recovery partition using flash_image. Obviously that means you first need root AND S-OFF. No, I won't tell you how to root your phone or what S-OFF is.
Instructions:
Code:
$ su
# flash_image recovery recovery-cw3-test1.img
'flash_image' isn't included intentionally - if you're smart enough to know how to flash this properly and understand the risks, then you might be smart enough to know where to get 'flash_image'.
How'd I do it? Top Secret - I'd have to kill you if I told you.
Download link: [REMOVED - use one from CM7]http://dl.dropbox.com/u/14943973/recovery-cw3-test1.img
Need to revert back to 2.5.0.1? Flash this: http://koush.tandtgaming.com/recoveries/recovery-clockwork-2.5.0.1-espresso.img
Enjoy it? Thank me!
Is it possible to get it in an update.zip format ? I don't want to mess with s-off for now.
SKAm69 said:
Is it possible to get it in an update.zip format ? I don't want to mess with s-off for now.
Click to expand...
Click to collapse
Not from me, sorry. I don't see any point in supporting the legacy method, especially when this version of CW doesn't give any readily-apparent advantages to the older one.
Nice find. I actually have S-OFF but when I start this recovery it is telling me error mounting system, data and others. Is this normal or is something wrong with my setup?
JAWheat411 said:
Nice find. I actually have S-OFF but when I start this recovery it is telling me error mounting system, data and others. Is this normal or is something wrong with my setup?
Click to expand...
Click to collapse
It IS a test build. I'm about to flash it now, I'll let you know if it's just you or not
And FLASH_IMAGE is indeed included, at least its built into cm6.
Edit: it isn't just you, the recovery is practically nonfunctional haha. There are errors all over when you boot into it, mount usb storage crashes it, and it can't mount anything, including the sd card, so its virtually pointless to flash at this point
MusicMan374 said:
It IS a test build. I'm about to flash it now, I'll let you know if it's just you or not
And FLASH_IMAGE is indeed included, at least its built into cm6.
Edit: it isn't just you, the recovery is practically nonfunctional haha. There are errors all over when you boot into it, mount usb storage crashes it, and it can't mount anything, including the sd card, so its virtually pointless to flash. Might even be as bad as arayrays gingerbread port, that hardly works either
Click to expand...
Click to collapse
But the only new features you see would be the new color?
Ace42 said:
But the only new features you see would be the new color?
Click to expand...
Click to collapse
Pretty much yeah. It was orange instead of green. Some of the menus had different names, easier to understand for noobs, but they had the same content. But don't flash it until it's more functional.
Sent from my T-Mobile myTouch 3G Slide
Ok well can someone post an older Clockwork recovery.img so we can reflash it? We can't use this one to do anything.
MusicMan374 said:
It IS a test build.
Edit: it isn't just you, the recovery is practically nonfunctional haha. There are errors all over when you boot into it, mount usb storage crashes it, and it can't mount anything, including the sd card, so its virtually pointless to flash. Might even be as bad as arayrays gingerbread port, that hardly works either
Click to expand...
Click to collapse
I was at work when I uploaded the image and because of that I only briefly tested it. The errors at the beginning aren't critical, but I'll look into the overall functionality being broken, at some point tonight.
Hence this being a "TEST".
Thanks
I appreciate that. I like beta testing new things. It does seem to have a few more functions. I just couldn't revert back.....
Sent from my T-Mobile myTouch 3G Slide using XDA App
Flash this to go back to 2.5.0.1: http://koush.tandtgaming.com/recoveries/recovery-clockwork-2.5.0.1-espresso.img
Actually.. i see a new option to partition SD card straight from the recovery menu... this is a very useful feature... and i think thats why it deserves that build jump from 2.5 to 3.0..... but at this point... it is in an UNUSABLE state.. i understand it is a test build... but i cannot test anything because it crashes on every single option you can possibly choose... will go back to 2.5 and wait for a stable, or at least more functional test build... hope to see some improvements soon... I do not doubt that you guys can have this thing up and running in no timee.. its a good starting point.. Keep the work going... looking forward to it...
was anyone else hoping for a terminal like in good ol' amon_ra? I was...
Be nice to have it in update.zip form for the ones without s_off
Sent from my T-Mobile myTouch 3G Slide using XDA App
elry567 said:
Be nice to have it in update.zip form for the ones without s_off
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
S-off really is a must have. I attached the working build of 3.0.0.5, you have to either use flash_image with it, or fastboot flash, both of which require s-off.
Thnx
Sent from my T-Mobile myTouch 3G Slide using XDA App
mymomma8 said:
it crashes on every single option you can possibly choose
Click to expand...
Click to collapse
Sounds like youre doing it wrong. You can no longer use the power button to select options but rather the trackball
Sent from my T-Mobile myTouch 3G Slide using XDA App
I don't think that file was cw3 I flashed it and still have 2.5 (file by musicman)
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
MusicMan374 said:
S-off really is a must have. I attached the working build of 3.0.0.5, you have to either use flash_image with it, or fastboot flash, both of which require s-off.
Click to expand...
Click to collapse
I flashed it... it seems to be CW 2.5.... not CW 3.0 :/
guitarist5122 said:
Sounds like youre doing it wrong. You can no longer use the power button to select options but rather the trackball
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
No, i select the options with the trackpad... the problem is a bunch of recovery/cache errorss... that i cannot seem to fix, i tried wiping recovery/cache... and problem still persistess
EDIT: FOUND A TRULLY WORKING BUILD Thanks to whoareyou and can be downloaded from
http://forum.xda-developers.com/attachment.php?attachmentid=490785&d=1295154563
No crashes, everything works... sucessfully partitioned SD card. Will create a guide on how to partition SD card using this recovery.
mymomma8 said:
I flashed it... it seems to be CW 2.5.... not CW 3.0 :/
No, i select the options with the trackpad... the problem is a bunch of recovery/cache errorss... that i cannot seem to fix, i tried wiping recovery/cache... and problem still persistess
EDIT: FOUND A TRULLY WORKING BUILD Thanks to whoareyou and can be downloaded from
http://forum.xda-developers.com/attachment.php?attachmentid=490785&d=1295154563
No crashes, everything works... sucessfully partitioned SD card. Will create a guide on how to partition SD card using this recovery.
Click to expand...
Click to collapse
Alright thanks it works now!
Compiled Fota for 8500KK7
from src http://code.google.com/p/badadroid/
It works fine, Tested
Nice job!
Sorry to be a pain, but is it possible to get a fota for 2.0 and XXKK5? I think it's a better firmware than what I've heard.
Razyre said:
Nice job!
Sorry to be a pain, but is it possible to get a fota for 2.0 and XXKK5? I think it's a better firmware than what I've heard.
Click to expand...
Click to collapse
Possible, but need extract function addresses from KK5 bootloader
Rebellos did it for S8500KK7 i just compile fota.
Don't get any problems KK7, what's is better in KK5?
Razyre said:
Nice job!
Sorry to be a pain, but is it possible to get a fota for 2.0 and XXKK5? I think it's a better firmware than what I've heard.
Click to expand...
Click to collapse
Wait for KL1
Raitis said:
Possible, but need extract function addresses from KK5 bootloader
Rebellos did it for S8500KK7 i just compile fota.
Don't get any problems KK7, what's is better in KK5?
Click to expand...
Click to collapse
I heard some things I can't recall xD
It wasn't from personal experience. I'm going to flash XXKK7 soon, once the firmware is down and try the new FOTA.
I was getting massive problems getting android back on my phone after I re-flashed it. Every SINGLE time I did it, the wave S would flash as it initialised and would just crash all of a sudden. Every time I tried doing little changes, I'd reflash and try again and it just got ridiculous. I must've tried 5 times to get Android back on there.
Hopefully I will have more success with this firmware and Bada 2.0!
EDIT:
Exact same problem. I'm losing the will to lose with this now... I must be doing SOMETHING wrong. Can someone enlighten me?
I'm using XXKK7 with the custom bootloader and was using XXKK5 with the XPKJ1 (Think it's called that) custom firmware and bootloader and a thousand times I've had this problem. I flash the phone with those exact firmware setups and then copy over the galaxyboot folder with the image file in and the other stuff and put the mkextimages into the root of the internal storage and boot into recovery mode. That works perfectly.
THIS is where I have no idea what to do. The tutorial doesn't specify even slightly what I do here. Do I click reboot immediately, or do I select format SD or some other combination? I do remember using some of them before I booted and it worked, but I've tried so much and it's wasted so much time I want to know what I'm doing rather than testing blind and then waiting 10-20 minutes with a wiped phone again. I'm so tired of wasting my time because of what seems to be like laziness. Every time I boot using the normal call and power buttons, it gets bast the galaxy boot screen, does the galaxy animation and flashes for a bit, as it should, to initialise it all and freezes for a second and then crashes. I haven't checked for a while and have forgotten but I think it's in bootloop when it does that. When I say bootloop, I mean black screen on the phone that then turns off after a bit and then on again, like that in an endless cycle. After removing the battery, I can then try to boot using the normal android call+power but it does the same thing.
I did have Android on there but it got so slow and bogged down, corrupted my SD Card that I couldn't stand it anymore and did a clean flash, which should send the phone back to factory default, Bada 2.0. Ever since that I've never been able to put android back on there and I can't be bothered to do it again until someone can suggest something to help the problem.
I've literally reflashed around 10-15 times to try and fix the problem.
Could someone tell me what they do to get android on their phone, specifically using XXKK7, from start to finish, including how they flash? Just for information, to speed things up, I've flashed custom FOTA files on along with standard files. Do I have to put the custom files on after? Bada works fine, as it always has.
Thanks, sorry to sound pissy and arrogant and rude, but I'm just annoyed I can't get this to work because of a lack of guidance.
- Ross
great work guys ,
Best regards,
Razyre said:
this now... I must be doing SOMETHING wrong. Can someone enlighten me?
I'm using XXKK7 with the custom bootloader and was using XXKK5 with the XPKJ1 (Think it's called that) custom firmware and bootloader and a thousand times I've had this problem. I flash the phone with those exact firmware setups and then copy over the galaxyboot folder with the image file in and the other stuff and put the mkextimages into the root of the internal storage and boot into recovery mode. That works perfectly.
THIS is where I have no idea what to do. The tutorial doesn't specify even slightly what I do here. Do I click reboot immediately, or do I select format SD or some other combination?- Ross
Click to expand...
Click to collapse
In Android recovery console you don't need do anything, just wait while phone powered down, can take ~ 5min
Then boot android with Call key+Power
Raitis said:
In Android recovery console you don't need do anything, just wait while phone powered down, can take ~ 5min
Then boot android with Call key+Power
Click to expand...
Click to collapse
So I press reboot or I just leave it as soon as it is there? It comes up with the menu.
Razyre said:
So I press reboot or I just leave it as soon as it is there? It comes up with the menu.
Click to expand...
Click to collapse
Just leave as it is and don't press anything, it must shut down when finish process automatically
Edit
It also mention in Tutorial
Then this should popup (after the SGS screen)
DO NEVER, ABSOLUTELY NEVER PULL OUT BATTERY OR TOUCH THE PHONE IN THIS PROCESS
http://shadowas1.com/badadroid/IMG_0050.JPG
This can take up to 5 minutes.
Now, Two things can happen
1. The phone boots bada
2. The phone shuts down
In any of this cases your phone is absolutely fine. If you have case 2 you can boot bada to check if everythings alright if you wish.
Assuming we all boot bada shut down the phone again
Boot android in the normal way by holding the Power and Call key
Raitis said:
Just leave as it is and don't press anything, it must shut down when finish process automatically
Edit
It also mention in Tutorial
Then this should popup (after the SGS screen)
DO NEVER, ABSOLUTELY NEVER PULL OUT BATTERY OR TOUCH THE PHONE IN THIS PROCESS
http://shadowas1.com/badadroid/IMG_0050.JPG
This can take up to 5 minutes.
Now, Two things can happen
1. The phone boots bada
2. The phone shuts down
In any of this cases your phone is absolutely fine. If you have case 2 you can boot bada to check if everythings alright if you wish.
Assuming we all boot bada shut down the phone again
Boot android in the normal way by holding the Power and Call key
Click to expand...
Click to collapse
Thanks very much for the help. It just seemed it was doing nothing and menu popup says... I need to press something and the tutorial didn't confirm that.
EDIT: Works, I've been an idiot, thanks so much.
Just tested the new fota with 8500KK7 and it works absolutely fine, Android boots and no problems whatsoever. Thank you very much.
I have a problem . I boot android with bada 2.0 and it works fine , but SD Card doesn't work ( Sandisk 32GB class 4 ) " It says BLANK SD CARD " and I use nand version
Please I need help
Best regards,
Razyre said:
Thanks very much for the help. It just seemed it was doing nothing and menu popup says... I need to press something and the tutorial didn't confirm that.
EDIT: Works, I've been an idiot, thanks so much.
Click to expand...
Click to collapse
yeah i thought the tut specifically stated to do nothing but yeah, i really should work a bit on making my script give feedback on the display
ozeer said:
I have a problem . I boot android with bada 2.0 and it works fine , but SD Card doesn't work ( Sandisk 32GB class 4 ) " It says BLANK SD CARD " and I use nand version
Please I need help
Best regards,
Click to expand...
Click to collapse
is this in bada? if so tell bada to format it, sometimes bada likes to be retarded and not like how android handles the sdcard
nbates66 said:
is this in bada? if so tell bada to format it, sometimes bada likes to be retarded and not like how android handles the sdcard
Click to expand...
Click to collapse
this happen in android and its really annoying
bada recognizes it, but have problems with android
(I have transcend 8GB microsdhc class 2)
is this in bada? if so tell bada to format it, sometimes bada likes to be retarded and not like how android handles the sdcard
Click to expand...
Click to collapse
Honestly, I'd call Android retarded in the SD realm xD
Not only did it corrupt my card, but it puts lots of folders completely unorganised and visible into your SD. I like how Bada manages it personally. I'm sure there's a way to get around it, but it seems clumsy.
i've tested it in movinand and everything works fine.
thank u so much.
yakub234go said:
this happen in android and its really annoying
bada recognizes it, but have problems with android
(I have transcend 8GB microsdhc class 2)
Click to expand...
Click to collapse
That's weird...
I'm using a SanDisk 32GB (Formatted in Bada first let me note) and it works absolutely fine with android. It got corrupted the first time, no idea why, but I had backed up data that I copied back on after 3 gruelling hours.
Razyre said:
Honestly, I'd call Android retarded in the SD realm xD
Not only did it corrupt my card, but it puts lots of folders completely unorganised and visible into your SD. I like how Bada manages it personally. I'm sure there's a way to get around it, but it seems clumsy.
Click to expand...
Click to collapse
the way i see it, bada causes the issues by not using a 100% fat filesystem (something else likte tfs4 or such), i usually got around it by starting over with wiping the partitions from the SDcard and then creating about 3 primary partitions and ensuring the first is FAT formatted by windows (rest for android data and cache if wanted for such), both bada and android should them manage to use the FAT partition fine.
nbates66 said:
the way i see it, bada causes the issues by not using a 100% fat filesystem (something else likte tfs4 or such), i usually got around it by starting over with wiping the partitions from the SDcard and then creating about 3 primary partitions and ensuring the first is FAT formatted by windows (rest for android data and cache if wanted for such), both bada and android should them manage to use the FAT partition fine.
Click to expand...
Click to collapse
You set up the partitions yourself using Linux?
I'm still running off of NAND (Running way faster now), I presume you are using the SD Version?
EDIT: I have noticed that I can't access music on Android now and I was having problems with the gallery. Damnit.
i'm using NAND method because my SDcard is too slow, the Nand version mounts external SDcard as internal SDcard in android.
This is the newest philz recovery with an OG clockworkmod theme.
All credits go to invisiblek. I am just posting here with his permission.
http://www.invisiblek.org/recovery/
Grab the img for your device flash with flashify or tool of your choice.
**Temporarily removed the aromafm, graphics issues at this time.**
The aromafm.zip is for aroma file manager. Place zip in /data/media/0/clockworkmod/aromafm/. They zip file will be in the folder with your variant recovery.img
Does it have an option to change partition to f2fs?
Many thanks mate.
Helloworld294 said:
Does it have an option to change partition to f2fs?
Click to expand...
Click to collapse
No it does not.
<•invisiblek> would need f2fs-support in the boot.img's fstab
<•invisiblek> and if recovery thought it'd be a good idea to re-write that, you're going to end up with an un-bumped boot.img
its in his long term plan but its not there right now.
Woow...Thanks to the good work for d855 [emoji6]
God news
This recovery is not support for F400. It's bad news.
can the partitioning menu be added?
I don't see the aroma zip in the d850 folder
Sent from my LG-D850 using Tapatalk
Is this bumped?
Yes its bumped. Aroma pulled while invisiblek fixes graphic issues.
meyerweb said:
Is this bumped?
Click to expand...
Click to collapse
yes
on another note, as stated, aromafm is derped pretty hard on our device, i'm planning to look into fixing it up at some point, but it might be a bit
also i'm in the process of building/uploading a new version (6.58.9.1) which supports the cm updater, expect those to start rolling in shortly
for those interested in the fix: https://github.com/invisiblek/philz_touch_cwm6/commit/bef5775f20854a45ccfd96b1b04bf5ee28fe3af4
Does it support nandroid backup for modem?
@invisiblek
Great news. You are the real hero behind the scenes. Your work for our device is much appreciated mate thank you. We wouldn't have all those unofficial roms to play with until you make something official for us. it is very close I believe.
Sent from my LG-D855 using Tapatalk
Well, tried on my D850 and installed and ran fine, but 2 issues:
1. Can't mount external SD (SanDisk 64Gb in FAT32 but soon going back to ExFat), the path for it is incorrect and no option to change it
2. Installed a Zip file that replaced the kernel and even though it said all went ok it was never installed
Had to flash back the TWRP recovery (even though that one can't read my external_SD either no matter the format) so I can flash the new kernel properly.
Waiting for your next release to test it out.
Sent from my LG-D850 using Tapatalk
Omegadrive said:
Well, tried on my D850 and installed and ran fine, but 2 issues:
1. Can't mount external SD (SanDisk 64Gb in FAT32 but soon going back to ExFat), the path for it is incorrect and no option to change it
2. Installed a Zip file that replaced the kernel and even though it said all went ok it was never installed
Had to flash back the TWRP recovery (even though that one can't read my external_SD either no matter the format) so I can flash the new kernel properly.
Waiting for your next release to test it out.
Sent from my LG-D850 using Tapatalk
Click to expand...
Click to collapse
Thats odd, I flash kernels just fine and can flash from my sd card. Could you have gotten a bad download possibly.
can't get philz to make back-up
downloaded the latest version, flashed with flashify, rebooted, and when i try to make a back-up of my current rom, all it does is sit at the "checking" when trying to back up to sdcard1
not sure what i did wrong, but isn't working for me
goldsmitht said:
downloaded the latest version, flashed with flashify, rebooted, and when i try to make a back-up of my current rom, all it does is sit at the "checking" when trying to back up to sdcard1
not sure what i did wrong, but isn't working for me
Click to expand...
Click to collapse
bumped;
tried again, and can't get it to do anything after i select make backup. all it does is says "checking" and nothing.
i'm having problems getting 5.0 roms to install correctly, thought this might be the solution.
So what's going on here? Any work in progress? I don't like twrp that much.
Is there a version of philz recovery that will work on lg g3 as990? Can one be created?
i had a dinc4 in the past and I just bought on eon ebay. do we expect a cm12 or other lolipop rom.
does any one know what would need to be done to make one.
Welcome Back, dcooterfrog!
To remain on topic: I have no idea... Hopefully someone here will know more than I.
I very much hope there is still enough interest to get us CM12. This is a great phone.
therreid said:
I very much hope there is still enough interest to get us CM12. This is a great phone.
Click to expand...
Click to collapse
ill have to wait until I get the ebay phone. the guy said it wont get past the prompt.
but was not clearer than that.
I am hoping all needs is a factory reset.
but if needed ill do the whole thing
itgs nto clear to me if we can start with a kk rom to make a lollipop rom (port) but if we can I will give it a try unless I see soemoen else is looking into it. I always wanted to build form scratch.
I believe a kernel needs to be written. I myself don't have the proper experience to write one. Sorry. You cannot just simply port a ROM with a new updated verison of Android without having a Kernel that will run the dang thing. Will someone please PM me about a kernel and a ROM, I'll risk my device to beta testing if someone with experience will write up a kernel and someone bakes a ROM such as CM12 (unofficial). Let's get these users CM12!
it looks like the droid razr m is being put on cm12 (its beta now) using the kit kat bootloader
http://www.phonearena.com/phones/co...4G-LTE,Motorola-DROID-RAZR-M/phones/7043,7346
same processor
Qualcomm Snapdragon MSM8960 chipset
gpu Adreno 225
i am sure other stuff is differnt. but maybe not so much.
never built a rom from scratch.
what exactly is the boot loader (its not a different name for the kernel is it this is the one that gets me confused)
recovery needed
rom it self (system dirs
blobs again not sure exactly what this except it binaries.
i hope to have a phone in my hands soon. I was just going to play around with it but who knows
dcooterfrog said:
it looks like the droid razr m is being put on cm12 (its beta now) using the kit kat bootloader
http://www.phonearena.com/phones/co...4G-LTE,Motorola-DROID-RAZR-M/phones/7043,7346
same processor
Qualcomm Snapdragon MSM8960 chipset
gpu Adreno 225
i am sure other stuff is differnt. but maybe not so much.
never built a rom from scratch.
what exactly is the boot loader (its not a different name for the kernel is it this is the one that gets me confused)
recovery needed
rom it self (system dirs
blobs again not sure exactly what this except it binaries.
i hope to have a phone in my hands soon. I was just going to play around with it but who knows
Click to expand...
Click to collapse
A boot loader is the way to flash [EDIT]ROOT partitions. It's how you load the recovery, it is how you flash the kernel if you are still S-ON in this case. Without an unlocked boot loader, it makes things really hard to work with. There are work-a-rounds but it still makes things difficult. Most locked samsung devices have locked bootloaders and in my case, with the Galaxy Note 3, it prevents AOSP from being installed (or basically anything that isn't TouchWiz). THIS is the reason I want this phone to gain Lollipop capabilities. It should not be hard because we have unlocked bootloader and S-OFF capabilities!! Let's get it done.
sp bootloader is the Hboot portion. it loads first of all (and needn't be changed for CM12)
kernel--- this is what needs to be done first.
i will build up a test machine on a spare PC and see if I can get one to compile.
there are other devices that use the same processor and gpu on verizon, so they may have the same radio as well.
other questions i am not sure about.
will an existing recovery work or will it need ot eb be a lollipop recovery ( and also built)
I guess I should try and build cm11 from source first
I'm pretty sure, but uncertain, that all you need is a recovery that supports SELinux. That is a REQUIREMENT for Lollipop.
dcooterfrog said:
i had a dinc4 in the past and I just bought on eon ebay. do we expect a cm12 or other lolipop rom.
does any one know what would need to be done to make one.
Click to expand...
Click to collapse
Mdmower has a working build of cm12. Search mdmower.cmphys.com
darienms1986 said:
Mdmower has a working build of cm12. Search mdmower.cmphys.com
Click to expand...
Click to collapse
mdmower has one problem (maybe not a a problem for you guys but it is for me) the internal sd converts to data and the data converts to internal sd which i donot want , i tried wtih this modification he said and the rom worked i used it was pretty smooth , but when i tried without making data internal sd rom booted in much lesser time plus stucked at android password the encryption screen , so that's why i came back to my CM11 backup .
CAn anyone solve this issue for me :/
mrroks said:
mdmower has one problem (maybe not a a problem for you guys but it is for me) the internal sd converts to data and the data converts to internal sd which i donot want , i tried wtih this modification he said and the rom worked i used it was pretty smooth , but when i tried without making data internal sd rom booted in much lesser time plus stucked at android password the encryption screen , so that's why i came back to my CM11 backup .
CAn anyone solve this issue for me :/
Click to expand...
Click to collapse
To solve use a different ROM, simple
darienms1986 said:
To solve use a different ROM, simple
Click to expand...
Click to collapse
LOL , and where's the different rom with updated nightly ?
The Pac Man rom works very well. Give that a try........
therreid said:
The Pac Man rom works very well. Give that a try........
Click to expand...
Click to collapse
pac rom has bugs which i have not found in this cm12 nightly
Hi, anyone tried AICP? Swap internal and sd on cm12.1 don't rrally give enough space for sdcard
Both PAC and AICP recent builds use the internal swap that CM 12.1 uses. If you need more SD storage add an SD card. The swap gives you significantly more space for apps rather than pictures and the such that can be stored on an external SD card.
EzraDi said:
Hi, anyone tried AICP? Swap internal and sd on cm12.1 don't rrally give enough space for sdcard
Click to expand...
Click to collapse
wmuflyer said:
Both PAC and AICP recent builds use the internal swap that CM 12.1 uses. If you need more SD storage add an SD card. The swap gives you significantly more space for apps rather than pictures and the such that can be stored on an external SD card.
Click to expand...
Click to collapse
So there's no lollipop rom without swaping the internal cause I need space for obb and data not for pic or something else
I don't know of any that do not use the swap.
EzraDi said:
So there's no lollipop rom without swaping the internal cause I need space for obb and data not for pic or something else
Click to expand...
Click to collapse
wmuflyer said:
I don't know of any that do not use the swap.
Click to expand...
Click to collapse
Thank you, I'll upgrade to a new phone then
Good Morning/afternoon/evening/night people. I've been very confused about what I saw in Castro last night.
I'm running a SM-T820 and I've got Tweaked 5.1 by @rorymc928. I can't mount data partition in TWRP anymore (that's another issue, not to be discussed here).
So, I installed Castro last night and wanted to check on the overall specs and stuff for this tab because I wanted to port a ROM for it. And I saw this (attachments).
I wonder if it actually is Project Treble, and if it is, can I flash an A-Only GSI to this tab?
I would like anybody to give insight on what this might be.
Thanks,
Ishaq
(Also sorry for bad English it's my third language)
NullCode said:
Good Morning/afternoon/evening/night people. I've been very confused about what I saw in Castro last night.
I'm running a SM-T820 and I've got Tweaked 5.1 by @rorymc928. I can't mount data partition in TWRP anymore (that's another issue, not to be discussed here).
So, I installed Castro last night and wanted to check on the overall specs and stuff for this tab because I wanted to port a ROM for it. And I saw this (attachments).
I wonder if it actually is Project Treble, and if it is, can I flash an A-Only GSI to this tab?
I would like anybody to give insight on what this might be.
Thanks,
Ishaq
(Also sorry for bad English it's my third language)
Click to expand...
Click to collapse
To get the data to mount you'll need to format data, then reboot to twrp. Then if you check the mount section it should be mounted /or will mount.
Note as you are formatting data, you will want to backup your internal storage first.
rorymc928 said:
To get the data to mount you'll need to format data, then reboot to twrp. Then if you check the mount section it should be mounted /or will mount.
Note as you are formatting data, you will want to backup your internal storage first.
Click to expand...
Click to collapse
Good Afternoon. Thank you for telling how to mount data again. I'll backup internal storage and do everything as stated. But also could you please give some insight on if I can flash GSI's on this Tab? Because Castro said this Tab is Treble supported.
Btw I'm that 666 person with a changed username
Edit: Seems like Castro gives misinformation. Man I had got my hopes up.
And if that's the case I have a question: Can I flash Android 10 GSI's using Valera's Treble thingy?
NullCode said:
Edit: Seems like Castro gives misinformation. Man I had got my hopes up.
And if that's the case I have a question: Can I flash Android 10 GSI's using Valera's Treble thingy?
Click to expand...
Click to collapse
Not sure re the flashing, I haven't tried it. If you do try just be comfortable with recovery back from basic firmware. Often people get stuck, think it's bricked, but it just needs to get to download - stock - and back that way.
Let me know how you get on
rorymc928 said:
Not sure re the flashing, I haven't tried it. If you do try just be comfortable with recovery back from basic firmware. Often people get stuck, think it's bricked, but it just needs to get to download - stock - and back that way.
Let me know how you get on
Click to expand...
Click to collapse
If that's the case then I'll not try to flash Valera's Treble because my Laptop's SSD is dead and it doesn't boot. Thank you for all the information rory
And since my question has been answered, I want to know how to close a thread