SM-T820 TWEAKED 5.1 ***** PIE ***** 20JUN2020
T820_CTD5_TWEAKED_5.1_DB4_by_rorymc928.zip
Based on latest stock CTD5 firmware
Tweaked, stable, zip aligned. SU/D
Forced encryption disabled
Deknoxed
Debloated
(GPU driver updated to latest adreno 313 rev 23.... returning soon)
Busybox
*****
Magisk updated 20.4
Matched edxposed version can be installed, or not, if preferred via magisk
(note that edxposed is the new framework replacing xposed to allow use with pie, it requires a number of steps, but fairly simple, guide to follow )
Edxposed installer
Gravity box PIE pre installed
Can be dirty flashed over Tweaked 5.0 (recommended) , or factory reset all will work.
bootloader update, only required if coming from a ROM or firmware prior to either PIE or Tweaked 5. 0
(it will work without, but experience shows the bootloader update is required for the fingerprint reader to function )
Full installation guide posted by GrandSportX....... Here..
Thanks for his efforts
[ROM] SM-T820 TWEAKED....................[rom] sm-t820 tweaked
SM-T820 TWEAKED 5.1 ***** PIE ***** 20JUN2020 T820_CTD5_TWEAKED_5.1_DB4_by_rorymc928.zip Based on latest stock CTD5 firmware Tweaked, stable, zip aligned. SU/D Forced encryption disabled Deknoxed Debloated (GPU driver updated to latest...
forum.xda-developers.com
For edxposed......
Xposed does not support android pie.
However, we now have edxposed, a magisk module which does basically the same thing.
Requirements are,
1. Riru core. Go to magisk downloads and type in the search bar "riru" , near the top you'll see riru core, click the download and it will install and offer a reboot.
2. Riru edxposed. Same search and you'll see riru edxposed further down 2 versions I chose sandhook, no reason but it works for me, same thing download it, it installs and offers reboot.
3. Edxposed installer , almost identical to the xposed installer, already installed in the Rom, open it and you should find gravitybox pie version in the modules section it may require switching on.
Advantage of edxposed is it passes safety net,..... I'm told.
Gravity box pie is still in early development, so whilst it has quite a bit there it's still a way off being complete, some selections didn't function for me, but a lot did.
Gravity box will still need to be switched on in edxposed modules.
More mods to follow...
Let me know how it goes
****DOWNLOADS ****
SUPER DEBLOAT
T820_CTD5_TWEAKED_5.1_DB4_by_rorymc928.zip
*Withdrawn *
T820_CTD5_TWEAKED_5.1b_DB4_by_rorymc928.zip
https://androidfilehost.com/?fid=8889791610682887875
***********
SM-T820_CSH9_TWEAKED_5.0_DB4
https://androidfilehost.com/?fid=1899786940962579450
Bootloader
https://androidfilehost.com/?fid=1899786940962579388
SM-T820_BSD1_TWEAKED_4.0_DB4
https://androidfilehost.com/?fid=1395089523397964116
Bootloader
https://androidfilehost.com/?fid=1395089523397962562
BRL1 TWEAKED 3.9 DB4 magisk
https://androidfilehost.com/?fid=11410963190603895588
BRJ1 Bootloader for odin flash
https://androidfilehost.com/?fid=11410963190603842333
BRJ1 TWEAKED 3.8 DB4 (Magisk)
https://androidfilehost.com/?fid=11410963190603842339
BRJ1 TWEAKED 3.8 (SUPERSU systemless) pending
Debloat list
https://androidfilehost.com/?fid=1322778262903995061
BRG3 TWEAKED 3.7s(a) DB4 (supersu systemless root)
https://androidfilehost.com/?fid=11410932744536994685
BRG3 TWEAKED 3.7m(a) DB4 (magisk root)
https://androidfilehost.com/?fid=11410932744536994684
BRG3 TWEAKED 3.6s DB4 (supersu systemless root)
https://androidfilehost.com/?fid=11410932744536989436
BRG3 TWEAKED 3.6m DB4 (magisk root)
https://androidfilehost.com/?fid=11410932744536989390
BRG3 TWEAKED 3.4m DB4 (magisk root)
https://androidfilehost.com/?fid=1322778262904022992
BRG3 TWEAKED 3.4s DB4 (supersu systemless root)
https://www.androidfilehost.com/?fid=1322778262904024975
BRE2 TWEAKED 3.4 DB4
https://androidfilehost.com/?fid=1322778262903995890
TWEAKED 3.3 DB3a.
Full wipe not essential if coming from previous tweaked oreo.
https://androidfilehost.com/?fid=5862345805528050921
Debloat list https://androidfilehost.com/?fid=1322778262903995061
TWEAKED 3.3 DB2 details soon....
https://androidfilehost.com/?fid=5862345805528045904
STOCK
TWEAKED 3.2
https://www.androidfilehost.com/?fid=674106145207492082
*************************************
Previous.....
SM-T820 TWEAKED 2.1 19MAR2018
Based on latest stock ARA2 firmware
Speed improvement over version 1.6
Significantly larger improvement over stock,
Tweaks similar to version 1.6, re benchmark tested and adjusted to tune performance.
Will flash dirty over tweaked 1.6 but not recommended, better with wipe,.... best with firmware upgrade first!!!
Flash over ARA2 version straight forward.... As usual... Do your backups
Benchmark before and after if you can and let me know
Now with 3minit battery mod
Xposed installer
Gravity box exposed module
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Full instructions here......
https://forum.xda-developers.com/showpost.php?p=75880333&postcount=130
Thanks to....
rovo89 and xposed, forum link below
https://forum.xda-developers.com/xposed/xposed-installer-versions-changelog-t2714053
C3C076 and gravity box
https://forum.xda-developers.com/xposed/modules/app-gravitybox-v7-0-0-tweak-box-android-t3653953
gharrington and 3minit battery mod, please visit for a full explanation of its functions
https://forum.xda-developers.com/showthread.php?t=2799958
**************************************************************
Version 2.1 super user + system xposed 3minit battery mod
**************************************************************
https://androidfilehost.com/?fid=746010030569961124
*******************************************************************
Version 2.1m2 magisk + xposed systemless 3minit battery mod
*******************************************************************
***Read instructions essential ***
https://forum.xda-developers.com/showpost.php?p=75938022&postcount=138
https://androidfilehost.com/?fid=746010030569962690
****************************
Version 2.0 with super user
****************************
https://androidfilehost.com/?fid=746010030569955947
*************************
Version 2.0 with magisk
*************************
https://androidfilehost.com/?fid=890129502657589509
Will dirty flash over tweaked 2. 0
Thanks to topjohnwu for magisk
Please visit magisk forum here for magisk details
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
SM-T820 Tweaked 1.6 by rorymc928
Tweaked stock Samsung ROM
Pre-Rooted
AQI2 base
Improved SD read ahead
Zipalign on boot
Internet speed improvement
Possibly smoother?
Subtle increase in benchmark speeds about 5%
Not a major change but wanted to do something
Thanks to
Chainfire for supersu
Ashyx for custom twrp and rooting process
Samsung for the base
Do your backups,
Best with a full wipe
Please post your results
AQI2 base
Tweaked version 1.6
******Recommend update to AQI2 firmware first******
Same tweaks as above,
This firmware seemed a little slower to me but tweaked result was close to version 1.1 after a few adjustments.
Would appreciate before and after benchmarks if you have time.
LINK
https://www.androidfilehost.com/?fid=745849072291683711
Previous.
Tweaked 1.1
AQF5
LINK
https://www.androidfilehost.com/?fid=745425885120756211
Hit thanks or buy me a coffee if you wish
https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=SJBRPUFXMJMKE&lc=AU¤cy_code=AUD&bn=PP-DonationsBF:btn_donateCC_LG.gif:NonHosted
Hey you know what.... Good job! Thanks for your work. Installing soon let you know how it runs.
how is pre-rooted compared to root?
Downloading now, will flash and report back after I get some sleep...lol
Sent from my SM-T820 using Tapatalk
diehard2013 said:
how is pre-rooted compared to root?
Click to expand...
Click to collapse
It carries out the root process at the end of the ROM flash, no need to do that yourself.
rorymc928 said:
It carries out the root process at the end of the ROM flash, no need to do that yourself.
Click to expand...
Click to collapse
goood!
this will give me courage to root.
thx
What's the difference between this and AQF3? Is battery life any better? Not much feedback on this rom.
diehard2013 said:
goood!
this will give me courage to root.
thx
Click to expand...
Click to collapse
I would recommend beginning with ashyx's thread to root first, it covers your options with dm verity and encryption. Read it carefully...
https://forum.xda-developers.com/ga...recovery-twrp-3-1-0-1-samsung-galaxy-t3581359
Then return for this rom, let me know how it goes
JWnSC said:
What's the difference between this and AQF3? Is battery life any better? Not much feedback on this rom.
Click to expand...
Click to collapse
Difficult to say with the firmware changes but pretty much always better on later releases, some changes will be subtle but add up, no apparent change in appearance.
I have some mods planned but I need some feedback from others on this rom as it stands, before I go further with this rom, it runs well for me though.
rorymc928 said:
I would recommend beginning with ashyx's thread to root first, it covers your options with dm verity and encryption. Read it carefully...
https://forum.xda-developers.com/ga...recovery-twrp-3-1-0-1-samsung-galaxy-t3581359
Then return for this rom, let me know how it goes
Click to expand...
Click to collapse
yes, the root guru.
I've done an a5 recently.
thx again
Rom seems to be running very well so far. Just installed today. Not much different from stock except for a few more options in settings. Nice work
Just wondering, any way you can mod this so Secure Folder can work while rooted?. I've heard it can be done with Xposed and we now have Xposed for Android 7.0
sam2c said:
Just wondering, any way you can mod this so Secure Folder can work while rooted?. I've heard it can be done with Xposed and we now have Xposed for Android 7.0
Click to expand...
Click to collapse
I've been a serial flasher for years but rom development is new to me, but I'll look into it, I have some minor theming to look at too
JWnSC said:
Rom seems to be running very well so far. Just installed today. Not much different from stock except for a few more options in settings. Nice work
Click to expand...
Click to collapse
Thanks for replying, I tried a T825 rom as well they had a few boot loops, I have no way of testing that one. Nobody seems to be posting, except for that, which meant I had no way of knowing it was working for others, your post means I can move on with this rom and re examine the other.
Check out AKT kernel tweaks for one plus 3. I believe it works for this device also. Not sure if it's a placebo effect but seems smoother. All I did was install the apk and use the tweaks from there.
Thank you
Late to the party but Im on aqf3, not f5. Does it make a difference? Thanks
Oh_wow said:
Late to the party but Im on aqf3, not f5. Does it make a difference? Thanks
Click to expand...
Click to collapse
Latest base always has some changes, should work ok, the mods I've added make a few improvements to performance, just make sure you read first and backup.
Hey @rorymc928. I see there's been about 90 or so downloads but no real feedback. Sooo my take. I flashed a couple days ago and all seems to be working perfect so far. When I test I like to run through all the settings and haven't gotten all the way through, but checking about half the settings, so far seems like everything's running perfect. I flashed, booted, set some settings, deleted some Sammy stuff I'll just never use, installed BusyBox and restored apps through Titanium and all's been running perfect. Battery seems to be really good. On a dimmed screen reading, it looks like I could get about 10 to 12 hours battery with everything enabled. Great first effort. :good:
DroidIt! said:
Hey @rorymc928. I see there's been about 90 or so downloads but no real feedback. Sooo my take. I flashed a couple days ago and all seems to be working perfect so far. When I test I like to run through all the settings and haven't gotten all the way through, but checking about half the settings, so far seems like everything's running perfect. I flashed, booted, set some settings, deleted some Sammy stuff I'll just never use, installed BusyBox and restored apps through Titanium and all's been running perfect. Battery seems to be really good. On a dimmed screen reading, it looks like I could get about 10 to 12 hours battery with everything enabled. Great first effort. :good:
Click to expand...
Click to collapse
Thanks for your comments, I'd like to do a bit more with this rom, I've been spending a bit of time trying to get a T825 rom going with no luck, difficult when i can't test it myself,.
At least this works ?
Related
Well here's the continuation of Barren, but now with ZV6.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Proudly Presents...
BarRin
What is has:
This Rom will install the modem, kernel, and the Rom
Rooted
busybox
zipaligned
V2 - init.d support through the kernel
Install
In TWRP, select Advanced, Wipe, then /system, /cache, /dalvic, and /data. DO NOT select internal or ext SD!
Flash Rom
Update profile/prl
Go to "Settings, More, Mobile network, and select anything but "Global
Change logs :
Code:
[B]V3.0.1[/B]
Just an update that is mostly Themed. Flash V3, then this. This works without xposed. So it MAY work with any ZV6 Rom.
Themed Messaging. No more Gawd Awful Yellow!!! Blends with stock theme now.
Themed Navbar - To get the Navbar to work with apps, Select "White Gradation" in Settings>Display>Home Touch Buttons>Color.
New bootani. - Courtesy of @HPTesla
Added oversharpening script from Skin1980 to the kernel. - so, new Stock kernel.
[B]V3[/B]
Updated SuperSU so we shouldn't have to update binaries - installs a whole different way
Stock ZV6 kernel with init.d and kexec support - MultiRom compatible
Native host files - you don't need an ad blocker app anymore
executable zipalign binaries - it'll run in terminal
Updater-script will delete a lot of junk files now
Qslide fix for WIFI calling - no longer stuck at the 4th slot
build.prop changes - removed some, fix a couple
init.d scripts - removed a couple that weren't doing anything
Most of everything since V2
This took a lot of work so there's probably other small things I forgot
V 2.3.1_beta
This can be used on any stock ROM and any ZV6 version.
1.Using the APN from Vanir as it's the most thorough one out. It SEEMS to give better reception for phone, data, and the handshake between LTE/eHRPD/3G is better. THIS is why this is beta. [B]You must have your phone all setup before using this!!![/B] It will not work on a fresh install. Also, it doesn't allow APN changes other than Sprints. Hotspot MAY work but unknown.
2. Removed MLT, and LGLIA apk's. More LG tattletales.
3. Fixed a couple of my goofs in build.prop. Got rid of the hiccup as I call it.
4. Added LG KB Black Theme for those that use LG KB.
5. init.d script changes
V 2.3 Includes everything from V2, and
build.prop edits for battery, speed and reception
Added LG FM Radio to /data (uninstallable) - It requires the headphone but will play through the speakers when plugged in. Headphones seem to act as the antennae. Thanks to @anvicota for this
Updated Sprint VoiceMail
V2.2 -Includes 2.1 plus-
Hopefully fixed install of bootani for people coming from Stock or Flashtool
Modified platform.xml - SD card fix?
Modified mixer paths- less increase on BT only. - Hopefully fixes distortion some were having
Install of Rin Kernel - installing a different way for the very few - again, hopefully
build.prop to reflect BarRin_2.2 in Software info
V2.1 - New Rin Kernel and BarRin bootani.
V2 - Like the original Barren. Nice and slim.
Removed most all, LG, Sprint apps
Added xposed and Tweakbox - removable
Some apps moved to /data
init.d scripts
Increased and FIXED Aux_out mixer path
Now installing with "Rin" kernel.
V1
Many apps removed but still giving the LG Stock experience. Still has Concierge, Smart Cards, Weather, OK Google on all screens, etc
A few build.prop mods - LG's mistake, All split window apps
Sd card fix
mixer_paths
Updated LG Keyboard, Quickmemo, Sprint voicemail - all can be uninstalled
Donators - ( Never asked for, but very much appreciated. Thank you )
Previous Barren
** @mjjcb
** @nkyer
BarRin
* @mjjcb
* @Kemocybr
Downloads:
______________________________
BarRin_D_V3.0.1 - Just an Update. Flash V3, then this. See Changelog.
BarRin_V3 - This is the full ROM. ZV6 Multirom Kernel, Modem included. Strongly suggest a CLEAN INSTALL! AND MAKE SURE YOU DISABLE ANY "SET ON BOOT'" OPTIONS YOU HAVE IN TRICKSTER/FAUX!!
- You can read this also if you'd like. Ramblings of this Stooge
BarRin_2.3.1_beta This is NOT a rollup of the previous. This is considered beta for now and can be used on ANY stock ROM. See change log above.
BarRin_2.3 - Must have at least V2 installed. Then flash this. It has everything up until now.
Barrin_2.2 - Another update. You must have V2 installed first, then flash this. If you installed 2.1, update to this as there were some changes we need.See change log - READ HERE for more info/fixes - Also, Software info is going to say "BarRin_D_2.2 regardless. Sorry bout that.
BarRin _2.1 - This is just an update. You must have BarRin V2 installed first. Then flash/update to this. This is just an update.
BarRin _D_V2
BarRin_O_V2
BarRin_D_V1
BarRin_O_V1
XDA:DevDB Information
BarRin, ROM for the Sprint LG G3
Contributors
engine95, HPTesla, seanskiT!, Tectas
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: Stock
Version Information
Status: Stable
Created 2014-11-23
Last Updated 2015-01-21
Added files and extras
BarRin V1 to BarRin V2 for Concierge/Weather
You'll need to flash either BarRin V1 Odexed or Deodexed first. Then flash this. This SHOULD work on both and update you to V2.
I'm not supporting this, so if you install it you're on your own. That's just because I'm not including it since V1.
BarRin_2.2_mixer_paths - Same as below, but with less BT increase. Some were getting distortion.
Fixed Aux-out mixer_paths
This will update ANY ZV6 mixer paths to increased volumes.
Stock_ZV6_mixer_paths
Stock ZV6 Kernels
Stock and Stock with init.d support.
1-21-15 -And now with MultiRom support
Flashable APN's
Flashable_Stock_Hosts
Issues/Fixes
SD cards
SD cards are becoming an issue for some reason. If you've followed ALL the instructions in the OP, and are still having issues, you may need to wipe your ext SD. And sometimes Internal as well.
Remove your ext SD and boot up.
If the problems are solved then you need to format your SD card in Windows or Linux as Fat32 no matter what size your card is. DO NOT USE TWRP to format Ext SD.
Root
If SuperSU has issues updating it's binaries, you may need to flash This when you flash the ROM.
Thanks Holmes. Downloading now.
One more...just in case
Thanks Team Stooge. Downloading now, will report back with any issues I come across.
After boot getting android process error. Cant get past selecting language selection
ssaggy said:
After boot getting android process error. Cant get past selecting language selection
Click to expand...
Click to collapse
Check your md5 and or re-download. I personally recommend downloading to pc then move to phone. I have flashed it about 4 times since last night and no issues like that. Be sure to wipe cache, dalvik, system and data.
Any major upgrade to Barren3 with Rin1.8?
gorillaz1 said:
Any major upgrade to Barren3 with Rin1.8?
Click to expand...
Click to collapse
Right now nothing major, just using ZV6 as a base. And right now only has stock kernel. New Rin is in the works.
Roger that. I'll be patient then. Keep up the great work!
Running great. Thanks guys.
Does this zip include the new radio?
Sent from my LG-ls990 using XDA Free mobile app
chrisctb said:
Does this zip include the new radio?
Sent from my LG-ls990 using XDA Free mobile app
Click to expand...
Click to collapse
It's in the OP. Yup
Just so you guys know, read this. http://forum.xda-developers.com/showthread.php?p=56991878
This won't effect this rom too much as @HPTesla had the kernel about ready for Primtime.
But it does/will effect the future of our beloved G3. When we finally get L, were screwed. Just thought I'd let you all know.
engine95 said:
It's in the OP. Yup
Click to expand...
Click to collapse
Apparently I can't read haha thanks
Sent from my LG-ls990 using XDA Free mobile app
engine95 said:
Just so you guys know, read this. http://forum.xda-developers.com/showthread.php?p=56991878
This won't effect this rom too much as @HPTesla had the kernel about ready for Primtime.
But it does/will effect the future of our beloved G3. When we finally get L, were screwed. Just thought I'd let you all know.
Click to expand...
Click to collapse
That's horrible.
Mahapederdon said:
That's horrible.
Click to expand...
Click to collapse
Tell me about it. It's friggin ridiculous what some people try and pull.
I started looking at n6. If I bought on from Sprint to play with is there gonna be any kind of lock. Or is it strait forward. I still love this phone but reading that article made me a little nervous.
So when we actually do get an official L there's no way of making it flashable?
TEAM ACHERON PRESENTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Since there is a custom recovery for the SM-T237P now - major thanks to @moonbutt74 - I have a Stock ROM zip available.
Please have a custom recovery installed. Here : http://forum.xda-developers.com/showthread.php?p=57660932
Two versions - Stock (only removed KNOX) and slightly debloated (removed KNOX and most google apps - can be re-downloaded from the play store)
THIS CAN ALSO BE A BASE ROM FOR OTHER DEVs or POTENTIAL DEVs TO USE FOR FURTHER DEVELOPMENT
The CREDITS
TEAM ACHERON - for the love and support
@scarmon25 - Amazing teacher
@lickarock - Amazing teacher and much patients
@bix2010 - Awesome Team member
@bilgerryan - One hell of a Dev & good guy
@ShinySide - root and recovery guide
@safariking - working with him on the SU/Root issues on the tab 4 7in
@AL_IRAQI - for support and ideas
@moonbutt74 - for the dev knowledge, community attitude of helping when you can & Philz recovery for SM-T237P
Testers : Very important - made sure everything works
@VerneVerne - lead tester
@mysticjp @dave5777
@trevortf
Change log :
Code:
Fixed :
Fonts - able to select in settings now
Updated :
SuperSU to V2.48
ROM includes :
ROOT (SuperSU v2.48)
Busybox
init.d support
Adaway (for those that want to get rid of those annoying ads)
Viper4Android (need to install drivers thru the app if you like louder music and more bass)
google DNS tweak
IPv4 & IPv6 speed tweaks
PLEASE HAVE A RELIABLE BACKUP OR ODIN AND SM-T237P FIRMWARE READY TO GO. just in case
INSTALL DIRECTIONS :
download ROM - make sure the MD5 SUM matches (i can't fix a bad download)
Reboot to philz recovery
Get it here : http://forum.xda-developers.com/showthread.php?p=57660932
Wipe to install new ROM (in philz recovery) - or you can manually wipe cache/dalvik cache/data/system
install ROM zip
reboot to system
set up and enjoy
DOWNLOAD LINKS :
Full Stock - No Knox : https://www.androidfilehost.com/?fid=95916177934553859
MD5 SUM : ab03cf13802a81c4c6acb8f97db8517c
Stock - no Knox - debloated : https://www.androidfilehost.com/?fid=95916177934553869
MD5 SUM : 31064fb1ec62083f486335be540ae038
ROM OS Version: 4.4.2 TW Kitkat
ROM Kernel: Linux 3.10.0
Based On: Samsung Firmware
Version Information
Status: stable
Created 2015-02-28
Last Updated 2015-04-11
Click to expand...
Click to collapse
-
IS YOUR SUPERSU UP TO DATE? GO HERE TO FIND OUT
-
Stable : http://forum.xda-developers.com/showthread.php?t=1538053
-
Beta : http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
KNOWN ISSUES :
PLEASE USE THIS BUG REPORT IF YOU WANT A RESPONSE AND TO HELP ME FIX THE PROBLEM
Device:: (device name)
Baseband: (NG2 / NK2 ect...)
ROM Ver: (build number of ROM)
Description: (please state install -full wipe or dirty flash, what's wrong, "possible fixes if known" and a way to recreate the issue)
Click to expand...
Click to collapse
NONE - should all be fixed -
MINE - possible future mods and tips/tricks
Waited al long time for this
FIRST!
Downloading de-bloated version now. will report back with any issues.
Everything running perfectly. Thank you!
Feel free to post any issues you guys come across.
24 hrs
Used device hard for past 24 hrs, no issues so far. :good:
Seems to be working great so far. Thank you
Sent from my SM-T237P using XDA Free mobile app
screen sharing not working
Found first issue, screen sharing not working with Roku3. Thought it was something I deleted so dirty flashed, still no go. Reinstalled stock from backup and works fine.
This is not a deal breaker but, I use it quite often.
stesul411 said:
Found first issue, screen sharing not working with Roku3. Thought it was something I deleted so dirty flashed, still no go. Reinstalled stock from backup and works fine.
This is not a deal breaker but, I use it quite often.
Click to expand...
Click to collapse
I haven't removed any screen sharing apps (all share and direct share).
If you could pull a logcat while trying to connect to your Roku I can see what got messed up.
screen sharing update
I jumped the gun, screen sharing working, issue was with the Roku and wifi connection. Reset Roku and rebooted router.
Good deal.
finally got around to installing, everything looks good so far only thing id like is recovery, download reboot menu but other then that looking good!
mysticjp said:
finally got around to installing, everything looks good so far only thing id like is recovery, download reboot menu but other then that looking good!
Click to expand...
Click to collapse
You can add that easily by installing Xposed Framework, and then the APM+ extension.
mysticjp said:
finally got around to installing, everything looks good so far only thing id like is recovery, download reboot menu but other then that looking good!
Click to expand...
Click to collapse
-
long_tall_texan said:
You can add that easily by installing Xposed Framework, and then the APM+ extension.
Click to expand...
Click to collapse
Wanam kit works as well. That's what I use.
Wow, i have been waiting for this! I will try it out immediately
THANK YOU DEVS!!!
To the Dev - I want to start learning how to create android roms. You said you welcome others to build on what you started here. So what kitchen are you using for this build? Or would you recommend a different one? Thanks !
rrhaskin said:
To the Dev - I want to start learning how to create android roms. You said you welcome others to build on what you started here. So what kitchen are you using for this build? Or would you recommend a different one? Thanks !
Click to expand...
Click to collapse
Or... I can make one for you guys. I personally use archikitchen but has problems with bootanimation in which I don't know why. Anyway, g_ding84 already made a good base so I don't think you would need a kitchen. Just a good file editor and a few more Idk. If you guys want I can perhaps make a custom one on my free time I can't make a custom rom for T330NU because of problems with my base. But g_ding84 base has no problems so why not develop off of it?
-DUHA
rrhaskin said:
To the Dev - I want to start learning how to create android roms. You said you welcome others to build on what you started here. So what kitchen are you using for this build? Or would you recommend a different one? Thanks !
Click to expand...
Click to collapse
I use Ricky's Rom kitchen
Here :
http://forum.xda-developers.com/showthread.php?t=2695356
Very user friendly. With this base SuperSU is already updated, you have INIT.D support and busybox. Only thing you will need to do is deodex the ROM. Which you can do with that ROM kitchen
Be creative, think outside the box....be a hero man!!!! Lol
DUHAsianSKILLZ said:
Or... I can make one for you guys. I personally use archikitchen but has problems with bootanimation in which I don't know why. Anyway, g_ding84 already made a good base so I don't think you would need a kitchen. Just a good file editor and a few more Idk. If you guys want I can perhaps make a custom one on my free time I can't make a custom rom for T330NU because of problems with my base. But g_ding84 base has no problems so why not develop off of it?
-DUHA
Click to expand...
Click to collapse
That what this base is for
Maybe just a good deodexer tool.
On your T330NU ROM - do you have the firmware?
g_ding84 said:
I use Ricky's Rom kitchen
Here :
http://forum.xda-developers.com/showthread.php?t=2695356
That what this base is for
Maybe just a good deodexer tool.
On your T330NU ROM - do you have the firmware?
Click to expand...
Click to collapse
I got the firmware here.
http://forum.xda-developers.com/showthread.php?p=58428539
My base has a broken bootanimation in which could be caused by the new update from archikitchen.
-DUHA
So recently I've rooted my galaxy s5 tmobile sm-g900t and install viper4andriod. I have Busybox installed through google play and installed on both my xu and system folder. I also made sure there was enough space. Around 30mb of space. I then installed SeLinuxMode Changer and Universal init.d so that i can force the SeLinixmode changer to stay on permissive. There is a bug where restarting and exiting out the app would reset SeLinux mode you have selected. Now that that SeLinusMode restarts on permissive, i was able to install Viper4Andriod. I then continued and installed the driver, but after installation, i checked to see if anything changed in the sound. Nothing changed so i checked the driver status. It turns out to be Abnormal and unsupported. I'm running 2.3.40, and have also tried the latest version of Viper4Andriod, but both doesn't seem to work. I have stock touchwiz rom and completely disabled and removed Knox. I checked my root with Root Checker, and it passed. But for some reason going into recovery mode, it asks me to install supersu because it was missing. But at the same time, i am running PhilzTouch, which is outdated. I have tried other methods, but it doesn't seem to work. I just need to get pass the driver status problem.
If anyone know the solution to this, I'd very much appreciate it if you help us all out.
Same for me : with 6.0.1 rooted, the driver was unsupported.
What worked for me was to install viper4android from the play store, as the 2.3.4.0 version has better sound (in my own opinion) than the 2.4.0.1 that can be found elsewhere. After installing the driver in high quality, it showed as unsupported.
I had to flash two additional files that you can find here http://forum.xda-developers.com/showpost.php?p=52106530&postcount=609 : Viper4A-[Build.Prop-Tweaks]-CWM.zip and Viper4A-[Soundfix-LibFiles]-CWM.zip. I am no expert, and probably only the second file is required but I flashed both and it just worked.
Also, you don't need a SElinux permissive kernel. You can simply flash the file linked here http://forum.xda-developers.com/showthread.php?p=61242973#post61242973, and it will patch your system. As long as you have supersu installed, you will be able to use viper4android in enforcing.
For full steps, you can also have a look at maximumentropy post here :
maximumentropy said:
...
Install the APK in the standard way (not in priv-app or most convolvers won't work).
Install the highest quality drivers and reboot to recovery
Flash the update here from recovery to allow V4A execution with SELinux Enforcing: http://forum.xda-developers.com/showthread.php?p=61242973#post61242973
Flash the Viper4A-[Soundfix-LibFiles]-CWM.zip from this message (but not the others) to replace the system sound libraries in /system/lib/soundfx with V4A-compatible versions: http://forum.xda-developers.com/showpost.php?p=52106530&postcount=609
Reboot
In Viper settings, use Normal mode, not Compatible.
Enable V4A-FX in the desired profile (it is not necessary to use Force Enable V4A)
...
Click to expand...
Click to collapse
alexbelgium said:
Same for me : with 6.0.1 rooted, the driver was unsupported.
What worked for me was to install viper4android from the play store, as the 2.3.4.0 version has better sound (in my own opinion) than the 2.4.0.1 that can be found elsewhere. After installing the driver in high quality, it showed as unsupported.
I had to flash two additional files that you can find here http://forum.xda-developers.com/showpost.php?p=52106530&postcount=609 : Viper4A-[Build.Prop-Tweaks]-CWM.zip and Viper4A-[Soundfix-LibFiles]-CWM.zip. I am no expert, and probably only the second file is required but I flashed both and it just worked.
Also, you don't need a SElinux permissive kernel. You can simply flash the file linked here http://forum.xda-developers.com/showthread.php?p=61242973#post61242973, and it will patch your system. As long as you have supersu installed, you will be able to use viper4android in enforcing.
For full steps, you can also have a look at maximumentropy post here :
Click to expand...
Click to collapse
It says its only for kitkat rom? Do you knw if it works for gs5 sm-g900t?
Frankie_Xenon said:
It says its only for kitkat rom? Do you knw if it works for gs5 sm-g900t?
Click to expand...
Click to collapse
Well I am sure that it works both for SM-G900F on 5.0 and 6.0.1 roms. The best for you is to make a backup of your system before trying. As it only impacts the system and not the kernel, it should work whether it is g900f or g900t...
alexbelgium said:
Same for me : with 6.0.1 rooted, the driver was unsupported.
What worked for me was to install viper4android from the play store, as the 2.3.4.0 version has better sound (in my own opinion) than the 2.4.0.1 that can be found elsewhere. After installing the driver in high quality, it showed as unsupported.
I had to flash two additional files that you can find here http://forum.xda-developers.com/showpost.php?p=52106530&postcount=609 : Viper4A-[Build.Prop-Tweaks]-CWM.zip and Viper4A-[Soundfix-LibFiles]-CWM.zip. I am no expert, and probably only the second file is required but I flashed both and it just worked.
Also, you don't need a SElinux permissive kernel. You can simply flash the file linked here http://forum.xda-developers.com/showthread.php?p=61242973#post61242973, and it will patch your system. As long as you have supersu installed, you will be able to use viper4android in enforcing.
For full steps, you can also have a look at maximumentropy post here :
Click to expand...
Click to collapse
Do you know if this works for lollipop 5.1.1? It said for kitkat rom?
Frankie_Xenon said:
Do you know if this works for lollipop 5.1.1? It said for kitkat rom?
Click to expand...
Click to collapse
Mmh I answered just above to that question? I tested it both on touchwiz with android 5 (lollipop) and 6 (marshmallow) and it works! It said "only kitkat" because at that time lollipop wasn't out you can see that the original post was dated from early 2014.
alexbelgium said:
Mmh I answered just above to that question? I tested it both on touchwiz with android 5 (lollipop) and 6 (marshmallow) and it works! It said "only kitkat" because at that time lollipop wasn't out you can see that the original post was dated from early 2014.
Click to expand...
Click to collapse
My apologies lol. My phone lagged and i ended up replying twice. Thanks ill give it a shot!
alexbelgium said:
Mmh I answered just above to that question? I tested it both on touchwiz with android 5 (lollipop) and 6 (marshmallow) and it works! It said "only kitkat" because at that time lollipop wasn't out you can see that the original post was dated from early 2014.
Click to expand...
Click to collapse
For some reason the driver keeps asking me to install it after flashing 2 the zips.
Guys, can you check this ROM(lollipop 5.1.1) for geiti94 which have all ready included this app. Very stable and battery friendly.
https://mega.nz/#!HdggTITL!C9bVqBlPwh8Kg8R7eeJQ_NokENEBwqmhkXBMNjwOZUs
Frankie_Xenon said:
For some reason the driver keeps asking me to install it after flashing 2 the zips.
Click to expand...
Click to collapse
Is your kernel still permissive? If not you can also try to flash the supolicy fix.
You can also try to remove completly the viper4android app and reinstall it.
Lastly there are some identified issues with some supersu versions. I am sure that the driver installation works with supersu 2.52 (my main one when I was on lollipop) and 2.68 (the one I use on marshmallow). Changing your supersu to 2.52 could perhaps help you. This is identified in the main viper4android thread here "If you see V4A installation pop-up loop, its probably due to incomplete root."
Hi. I have a G900H with stock rom, just rooted and Selinux enforcing and Viper works just fine. I just installed it and also installed busybox and flashed a file I got somewhere on xda to permit Viper on enforcing. I also had to verify my settings on supersu to uncheck the entry for namespaces. Hope it helps
Enviado desde mi SM-G900H mediante Tapatalk
So op, did you manage to make viper4android work?
alexbelgium said:
So op, did you manage to make viper4android work?
Click to expand...
Click to collapse
read the reply above you it gives you the solution
---------- Post added at 12:09 AM ---------- Previous post was at 12:04 AM ----------
alexbelgium said:
So op, did you manage to make viper4android work?
Click to expand...
Click to collapse
mannyvzla said:
Hi. I have a G900H with stock rom, just rooted and Selinux enforcing and Viper works just fine. I just installed it and also installed busybox and flashed a file I got somewhere on xda to permit Viper on enforcing. I also had to verify my settings on supersu to uncheck the entry for namespaces. Hope it helps
Enviado desde mi SM-G900H mediante Tapatalk
Click to expand...
Click to collapse
works like a charm thank you! lets spread this so more people will enjoy it
Also make sure "Mount Namespace Separation" is off in SuperSU.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NATF MegaROM V20
Available for T-Mobile (H918) and AT&T (H910) Variants
ROM Features
(H918 Only) NRD90M 10J Base (December 2016 Patch Level, released January 2017)
(H910 Only) H91010C 10K Base (May 2017 Patch Level)
Stock LG Kernel or Custom Kernel - selectable through Aroma installer
Choice of SuperSU, MagiskSU, or No Root
build.prop tweaks
Increased background app limit
Increased RAM utilization - make the phone use more of our 4GB RAM before dumping apps
Adoptable Storage - use SD card to seamlessly expand on the 64GB we've already got
Aroma Support
Almost 50 optional apps to choose from during a completely modular install
Google Apps, LG Apps, Carrier Apps - ALL optional
3Minit Battery and Clock mods
Viper4Android
Google Assistant available natively with latest Google App update
AND A WHOLE TON MORE!!!
I would like to thank/recognize the following people for their contributions:
@jcadduono - For the original 10d system dump, kernel, and of course for TWRP
@Chainfire - For SuperSU
@nyfl2004 - For our working Viper4Android, 3Minit Battery and Clock modded to the V20, and for all of his help with getting Aroma up and running
@ivicask - For looking through my convoluted Aroma setup and helping identify why it was randomly breaking
@topjohnwu - For his most excellent Magisk and MagiskSU apps allowing our rooted devices to pass SafetyNet and catch 'em all!
@AllTheWay - For providing me with the AT&T system dump needed to port my customizations over, and being my guinea pig to get it booting
@Tilde88 - For all of his work in getting a stable kernel going for the V20, and allowing me to include it in my ROM
@USA-RedDragon - For his Werewolf kernel, and allowing me to include it in my ROM
Current Known Issues:
H918
Some people have experienced skips when listening to music over Bluetooth. I too have had it happen, but it is not at all common, and lasts less than a fraction of a second. Putting your phone either on vibrate or DND seem to help further reduce occurrences.
H910
4.0 is based on 10L, not M, as my dump of that one would not boot. WiFi Calling and VoLTE do work, however.
All Variants
Data Wipe option in Aroma doesn't always work. This is a glitch related to newer hardware and Nougat, as verified on the HTC 10 as well. If you expected your data to be wiped, but it was not, please reboot into TWRP, perform a Factory Reset, and then flash the ROM again. You MUST flash the ROM again after a factory reset, or you will lost systemless root AND your internal storage may encrypt.
Netflix - They have blocked their app from unlocked/rooted devices. You can sideload it from APK Mirror, or use Magisk to hide root from Google Play Store, then clear data on the Play Store. Your device will then show as Certified and all blocked apps will be available.
As any more come up, they'll be added here, and then fixed ASAP.
Pre-Install Steps
If you are not already on TWRP 3.0.2.0-RC8 or higher, do that first! Bootloops and loss of access to recovery is possible with all older builds
Backup your existing ROM
Notes
I recommend wiping data and flashing clean, if coming from another custom ROM. This should not be required, but you may wind up with FCs if you don't. A clean flash is required if you're on an older custom ROM, or older stock based on 10d.
If you're already on an older build of my ROM, you can dirty flash future updates. However if you experience FCs, please do a clean flash
Changelog:
v5.0 T-Mobile
Updated base to 10K (May 2017)
Added Google Pixel Launcher from Android O Beta 2
Updated all Google Apps except Maps
Reverted Maps due to GPS issues for some
Updated Aroma to 3.00 Beta Downgraded back to Aroma 2.70RC2 in fixed build
Cleaned up the app lists somewhat
If Aroma freezes during the install, pull the battery and start again - this only happened to me once, in over 30 test flashes
Rearranged some of the menus for better flow
Spent a good 4 hours rewriting the installer-script to make it look a lot less ugly
Added Werewolf kernel by @USA-RedDragon in place of NotSoStock
Available without root as well
Further tweaked the memory utilization in build.prop, allowing background apps to remain in RAM longer
I think there's a few other changes, I just can't remember them at the moment. Roughly 20 hours into this update, brain is mush.
NOTE: Due to the changes to memory utilization in build.prop, your first boot after the update may cause the phone to lag. This will clear up within 5 minutes, and will not occur after subsequent reboots.
v4.0 T-Mobile
Added New Options for No Root Installs
Stock and NSS kernels available without root
3minit and V4A options still work
Updated all Google, LG, T-Mobile apps
Updated Nova Launcher
Updated Magisk to 11.6 (12.0 finicky on V20)
Removed Adaptive Brightness mod (was glitchy)
Several additional build.prop tweaks
Added Optional Apps
Google Voice
SMS Backup and Restore
Speedtest.net
Removed Pixel Launcher - Assistant interferes
v4.0 AT&T
ROM base updated to 10L (10M won't boot)
Added New Options for No Root Installs
3minit and V4A options still work
Removed Werewolf kernel
Updated all Google, LG, AT&T apps
Updated Nova Launcher
Updated Magisk to 11.6 (12.0 finicky on V20)
Several additional build.prop tweaks
Added Optional Apps
Google Voice
SMS Backup and Restore
Speedtest.net
Removed Pixel Launcher - Assistant interferes
Now some notes and observations:
There was a report of the ROM not froze at the AT&T splash. If this occurs to you, first wait 5 minutes to make sure it really is frozen. Then, pull the battery and then boot up again. The Android is Starting screen will then come up as expected.
There was also one issue where the ROM wouldn't boot past the AT&T splash. For this, boot into TWRP, flash the AT&T boot.img (attached to the download post) using the IMG flash option, then flash Magisk 11.6 (also attached), then reboot as normal. I'm also uploading a patch to AFH, which should automate this process. Give it a try and report back.
Downloads
TWRP
https://build.nethunter.com/test-builds/twrp/lge/
v5.0
H918 for T-Mobile
AFH: https://www.androidfilehost.com/?fid=673368273298960907
MD5: d16b367b4ebdf8551001a32aa7d75636
H910 for AT&T
COMING SOON
v4.0
H918 for T-Mobile
AFH - https://www.androidfilehost.com/?fid=817550096634766880
MD5 - f4b1f90940c40dff3190250a5134f001
H910 for AT&T
AFH - https://www.androidfilehost.com/?fid=457095661767158881
MD5 - 0f89637a0be11a711e61f95e324284a6
See Notes here.
v3.4
H918 for T-Mobile UPDATED on March 24th
AFH - https://www.androidfilehost.com/?fid=745425885120718875
MD5 - aa0def523efbeb471ebdb850d7e9c4e1
H910 for AT&T
AFH - https://www.androidfilehost.com/?fid=745425885120718951
MD5 - d3ce0ee5940ac4b203461eafd039f53d
Older Releases:
v3.3
H910 AT&T ONLY
https://www.androidfilehost.com/?fid=745425885120712176 - FIXED as of March 2
MD5 - 75507cd0c72ae718e0ddd751ba6dea60
v3.2
H918 T-Mobile ONLY
https://www.androidfilehost.com/?fid=457095661767135277
MD5 - 220b70d8ffaa9d8246df0f5e16fbda6a
v3.1
https://www.androidfilehost.com/?fid=817550096634742854
MD5 - 53c5da3c3eb264a0e8af5806b56cda25
v3.0 Fixed (updated 1/24 to address Aroma bugs)
https://www.androidfilehost.com/?fid=817550096634741220
MD5 - 98782147bbae32554a6d41e974442647
See this post for additional information.
1st. Interesting! Glad to see some spark in individuals pushing for their own and making the community grow.
HiddenKnight said:
1st. Interesting! Glad to see some spark in individuals pushing for their own and making the community grow.
Click to expand...
Click to collapse
Yeah, I was big into development in WM 5 and through to WM 6.5 up until I got the Droid X in 2010. It's gonna take some time, but I'm getting back into development as a whole.
Sent from my iPhone using Tapatalk
NotATreoFan said:
Yeah, I was big into development in WM 5 and through to WM 6.5 up until I got the Droid X in 2010. It's gonna take some time, but I'm getting back into development as a whole.
Click to expand...
Click to collapse
Get off that iPhone and the development will come to you like a breeze
HiddenKnight said:
Get off that iPhone and the development will come to you like a breeze
Click to expand...
Click to collapse
Work phone. And Tapacrap is actually useful on iOS.
Sent from my iPhone using Tapatalk
Feedback
@NotATreoFan great job bro, bootup was fast as you advertise, wow, no lags or stutters i can say so far, only issue for me is that some LG apps need to be put back in, namely the LG app updater as Home and App apk has an update as well as the weather widget and Memo for the capture feature, but other than that for me its definitely a good start for a DD, thanks
NotATreoFan said:
[*]Facebook and Amazon stripped out, and they DO NOT install on initial setup
Click to expand...
Click to collapse
Great work on the ROM!
Question, how did you get the post-install apps to not install?
Tilde88 said:
Great work on the ROM!
Question, how did you get the post-install apps to not install?
Click to expand...
Click to collapse
I think it's from one of the LG items I removed. Going to experiment tomorrow morning and see if I can make them install again.
I also realized that I accidentally removed Calendar Storage, so that'll be fixed tomorrow as well.
Sent from my iPhone using Tapatalk
kelvin216 said:
@NotATreoFan great job bro, bootup was fast as you advertise, wow, no lags or stutters i can say so far, only issue for me is that some LG apps need to be put back in, namely the LG app updater as Home and App apk has an update as well as the weather widget and Memo for the capture feature, but other than that for me its definitely a good start for a DD, thanks
Click to expand...
Click to collapse
Yep. I'm going to have Test 6 ready tomorrow with some core functions added back.
Sent from my iPhone using Tapatalk
@NotATreoFan thank you for this broham!!!!!
I just flashed Tilde88's latest and after a night of testing his tonight I will be flashing yours to test out. You all are so highly skilled and keep up the unbelievable work.
When I'm up and running with yours tomorrow I will report back and do a comparison of the 2 ROMs.
If there is anything I can do as far as testing holler at me, I'm down to tear up my phone.
Again, thank you and keep em coming baby!!!!
i got the post-install apps to stop installing by changing the model number in the build prop the the US unlocked version.
Also to the OP how the hell did you get the ROM to deodex successsfully every time I do it i get stuck at the TMO boot animation
albinoman887 said:
i got the post-install apps to stop installing by changing the model number in the build prop the the US unlocked version.
Also to the OP how the hell did you get the ROM to deodex successsfully every time I do it i get stuck at the TMO boot animation
Click to expand...
Click to collapse
It's not deodexed yet. That's my plan for today, along with some bug fixes.
oh ok. Yeah every time i've done it with superRs kitchen i cant get past the TMO boot animation. Someone did successfully do it as there is a rom up thats deodexed.
NotATreoFan said:
It's not deodexed yet. That's my plan for today, along with some bug fixes.
Click to expand...
Click to collapse
you know the bravia reality engine thing the other rom has. Do mods like that (framework) require that the rest of the ROM is deodexed? I know apps needed to be deodexed for editing but didnt know if it affects other mods.
Usually just do CM stuff
Is there any chance you can upload JUST a system IMG? I'm seeing if I can get this working on the US996...
albinoman887 said:
you know the bravia reality engine thing the other rom has. Do mods like that (framework) require that the rest of the ROM is deodexed? I know apps needed to be deodexed for editing but didnt know if it affects other mods.
Usually just do CM stuff
Click to expand...
Click to collapse
I don't believe you need to have the complete ROM deodexed, just the parts you're modifying. But I could be wrong since I've only done this a few times.
monsieurtalbot said:
Is there any chance you can upload JUST a system IMG? I'm seeing if I can get this working on the US996...
Click to expand...
Click to collapse
As soon as I get the latest test build booting, I'll make a system.img and you can try it. There really shouldn't be a reason it wouldn't boot. It just may behave weird if there are files it's not expecting.
Sent from my iPhone using Tapatalk
SM-T825 TWEAKED 5.1 ***** PIE ***** 20JUN2020
T825_CTD1_TWEAKED_5.1_DB4_by_rorymc928
Based on latest stock CTD1 firmware
Tweaked, stable, zip aligned. SU/D
Forced encryption disabled
Deknoxed
Debloated
(GPU driver updated to latest adreno 313 rev 23.... returning soon)
Busybox
*****
Magisk updated 20.4
Matched edxposed version can be installed, or not, if preferred via magisk
(note that edxposed is the new framework replacing xposed to allow use with pie, it requires a number of steps, but fairly simple, guide to follow )
Edxposed installer
Gravity box PIE pre installed
Can be dirty flashed over CSH9 , or factory reset both will work. Recommend straight flash over PIE rom / CSH9, negligible benefit from wipe
Requires bootloader update to a pie bootloader if not on pie already.
(it will work without, but experience shows the bootloader update is required for the fingerprint reader to function )
For edxposed......
Xposed does not support android pie.
However, we now have edxposed, a magisk module which does basically the same thing.
Requirements are,
1. Riru core. Go to magisk downloads and type in the search bar "riru" , near the top you'll see riru core, click the download and it will install and offer a reboot.
2. Riru edxposed. Same search and you'll see riru edxposed further down 2 versions I chose sandhook, no reason but it works for me, same thing download it, it installs and offers reboot.
3. Edxposed installer , almost identical to the xposed installer, already installed in the Rom, open it and you should find gravitybox pie version in the modules section it may require switching on.
Advantage of edxposed is it passes safety net,..... I'm told.
Gravity box pie is still in early development, so whilst it has quite a bit there it's still a way off being complete, some selections didn't function for me, but a lot did.
Gravity box will still need to be switched on in edxposed modules.
More mods to follow...
Let me know how it goes
****DOWNLOADS ****
SUPER DEBLOAT
T825_CTD1_TWEAKED_5.1b_DB4_by_rorymc928
Fix for encryption disable...
https://androidfilehost.com/?fid=8889791610682887843
T825_CTD1_TWEAKED_5.1_DB4_by_rorymc928
Withdrawn
*********************
SM-T825_CSH9_TWEAKED_5.0_DB4
https://androidfilehost.com/?fid=1899786940962579651
Bootloader
https://androidfilehost.com/?fid=1899786940962579621
SM-T825 TWEAKED 4.0
https://androidfilehost.com/?fid=1395089523397964302
new bootloader
https://androidfilehost.com/?fid=1395089523397964296
SM-T825 TWEAKED 3.9 (rc)
Magisk root
https://androidfilehost.com/?fid=11410963190603896745
SM-T825 TWEAKED 3.8(a)
Magisk root
https://www.androidfilehost.com/?fid=11410932744536994829
Supersu
temp removed
SM-T825 TWEAKED 3.6s DB4 (systemless supersu)
https://androidfilehost.com/?fid=11410932744536989439
SM-T825 TWEAKED 3.6m DB4 (magisk)
https://androidfilehost.com/?fid=11410932744536989437
SM-T825 TWEAKED 3.5 DB4
https://androidfilehost.com/?fid=1322778262903997340
SM-T825 TWEAKED 3.3 DB3
https://androidfilehost.com/?fid=5862345805528055090
Debloat list
https://androidfilehost.com/?fid=1322778262903995061
FULL ROM...
SM-T825 TWEAKED 3.2
https://www.androidfilehost.com/?fid=890278863836290631
****************
Previous builds
****************
SM-T825 TWEAKED 2.1 02APR2018
Based on latest ARA2 stock firmware,
Smoother and quicker, identical tweaks to T-820 version
Rooted
Init d
Deodex
Zip aligned
Zip align on boot
Sqlite
Extensive testing by kainanmaki SM-T825 user,
****Major credit to kainanmaki, for methodical testing, this wouldn't be here without his help. ****
Version 2.1M2 Magisk root, systemless xposed included, best of both worlds.
Version 2.1S2 Superuser, system xposed.
Both with.
Gravity box Xposed module
3minit battery included
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rovo89 and xposed, forum link below
https://forum.xda-developers.com/xposed/xposed-installer-versions-changelog-t2714053
C3C076 and gravity box
https://forum.xda-developers.com/xposed/modules/app-gravitybox-v7-0-0-tweak-box-android-t3653953
gharrington and 3minit battery mod, please visit for a full explanation of its functions
https://forum.xda-developers.com/showthread.php?t=2799958
Best flashed over updated firmware, should dirty flash but tested with factory reset, so do your backups.
Follow instructions below....
1. If you have xposed installed,either select it off in the app or uninstall, I only selected it off.
2. Boot to TWRP
3. Go to wipe,and select factory data reset.
4. Install ROM
5. Long boot........,
6. Ignore the xposed force close
7. Do your normal startup load.
8. Magisk, if that version flashed, will function at this point.
9. If you wish to operate xposed as well,go to the xposed installer app(matched version preinstalled),open it and install the framework,which will be systemless/system. Non recovery installation works fine. It will require reboot.
10. On Magisk version it will pass safetynet check whilst xposed is selected off by its switch,otherwise it indicates fail. So you can swap, as needed by work perhaps, with one reboot.
11. Use gravity box module to switch off stock battery icon.
Link below.........
*****************************************************
TWEAKED 2.1M2 Magisk root, systemless xposed.
*****************************************************
https://androidfilehost.com/?fid=746010030569966037
***********************************************
TWEAKED 2.1S2 Superuser standard xposed.
***********************************************
https://androidfilehost.com/?fid=818070582850504971
TWEAKED 2.0M
https://androidfilehost.com/?fid=890129502657594126
rorymc928 said:
SM-T825 TWEAKED 2.0 28MAR2018
Based on ARA2 stock firmware,
Smoother and quicker, identical tweaks to T-820 version
Extensive testing by kainanmaki SM-T825 user,
****Major credit to kainanmaki, for methodical testing, this wouldn't be here without his help. ****
Click to expand...
Click to collapse
Let's do this!!
Good job bro! You did it! I remember reading your post about sh*t not working or you having problems, or something to that effect... I hope you stick around for Lineage 15. You did a really good job on the T820 build....
AndroidDevices said:
Good job bro! You did it! I remember reading your post about sh*t not working or you having problems, or something to that effect... I hope you stick around for Lineage 15. You did a really good job on the T820 build....
Click to expand...
Click to collapse
Thanks, have some appointments today but should get it in line with the T-820 ROM soon. Make sure you get back with anything you find.
Anyone can test if Netflix si working using magiskHide? and If you can get HD content?
First of all @rorymc928 thank you so much for this Rom..
Can someone please tell me what is "tweaked" in this Rom? I went to T820 thread, but there it says "Tweaks similar to version 1.6, re benchmark tested and adjusted to tune performance.".
Is it debloated?
Thanks once again
ww100100101 said:
First of all @rorymc928 thank you so much for this Rom..
Can someone please tell me what is "tweaked" in this Rom? I went to T820 thread, but there it says "Tweaks similar to version 1.6, re benchmark tested and adjusted to tune performance.".
Is it debloated?
Thanks once again
Click to expand...
Click to collapse
If it's the same as T820, main user tweaks are pre-installed Magisk, Xposed and gravity box. Almost all tweaks for gbox work including battery bar and center clock. There's a lot of UI tweaks you can make in gbox so you just have to give it a try. I do run his tweaked build on the T820 and I just gotta say it runs really nice. I can't recall what all is on stock as far as bloatware, but seems pretty lite and easy enough to remove more if you want.
lupick said:
Anyone can test if Netflix si working using magiskHide? and If you can get HD content?
Click to expand...
Click to collapse
You have to use this Magisk module:
https://forum.xda-developers.com/apps/magisk/module-netflix-enabler-enable-netflix-t3708126
You can also do it manually.
HDR works too.
DroidIt! said:
If it's the same as T820, main user tweaks are pre-installed Magisk, Xposed and gravity box. Almost all tweaks for gbox work including battery bar and center clock. There's a lot of UI tweaks you can make in gbox so you just have to give it a try. I do run his tweaked build on the T820 and I just gotta say it runs really nice. I can't recall what all is on stock as far as bloatware, but seems pretty lite and easy enough to remove more if you want.
Click to expand...
Click to collapse
Gravity box is a great resource there's a lot that works but it can be trial and error for the mods that don't, I included it in the T-820 ROM, just forgot this time, but it is simple to install through the xposed installer anyway.
ww100100101 said:
First of all @rorymc928 thank you so much for this Rom..
Can someone please tell me what is "tweaked" in this Rom? I went to T820 thread, but there it says "Tweaks similar to version 1.6, re benchmark tested and adjusted to tune performance.".
Is it debloated?
Thanks once again
Click to expand...
Click to collapse
No debloating as yet, next step I'll get 3 minit battery in, which will bring it in line with the T-820.
I'll need to look at my notes for the list of tweaks.
Debloating can be a bit contentious, everything you take out someone else wants. Kainanmaki suggested aroma for it, so that may be the best way.
kainanmaki said:
You have to use this Magisk module:
https://forum.xda-developers.com/apps/magisk/module-netflix-enabler-enable-netflix-t3708126
You can also do it manually.
HDR works too.
Click to expand...
Click to collapse
Please try to set download quality to "high" and download "Bright".
The movie size should be 1.7GB in hd.
Without libcryptoem is usually in SD with a file size of 500MB.
Inviato dal mio SM-T825 utilizzando Tapatalk
lupick said:
Please try to set download quality to "high" and download "Bright".
The movie size should be 1.7GB in hd.
Without libcryptoem is usually in SD with a file size of 500MB.
Inviato dal mio SM-T825 utilizzando Tapatalk
Click to expand...
Click to collapse
Mmm interesting. I haven't used the feature on Android but I'll try it later and compare it with stock.
lupick said:
Please try to set download quality to "high" and download "Bright".
The movie size should be 1.7GB in hd.
Without libcryptoem is usually in SD with a file size of 500MB.
Inviato dal mio SM-T825 utilizzando Tapatalk
Click to expand...
Click to collapse
You're absolutely right about this. Tried both ways and yes, there's a 3 to 1 difference in Size
I wonder if there's any way to force the HD download with the libcrypto modification.
KainanMaki said:
You're absolutely right about this. Tried both ways and yes, there's a 3 to 1 difference in Size
I wonder if there's any way to force the HD download with the libcrypto modification.
Click to expand...
Click to collapse
if you check using DRM info (download it from playstore) is the tablet without libcrypt oem at windevine L1 or L3? on stock rom is L1. Device in L3 can access only SD content.
Try to use the following apk that should force the HD:
https://forum.xda-developers.com/showpost.php?p=75465158&postcount=132
Using this app the streaming quality is better? And the download size?!?
New builds up on first post....
Both with 3 Minit battery,
2.1M2 magisk +systemless xposed
2.1S2 super user +system xposed
Thoroughly tested by Kainanmaki, great thanks to him
, let me know how you find them..........Do your backups ?
rorymc928 said:
New builds up on first post....
Both with 3 Minit battery,
2.1M2 magisk +systemless xposed
2.1S2 super user +system xposed
Thoroughly tested by Kainanmaki, great thanks to him
, let me know how you find them..........Do your backups
Click to expand...
Click to collapse
Thank you Thank you Thank you )
jaidev.s said:
Thank you Thank you Thank you )
Click to expand...
Click to collapse
Good to see you back
First of all sorry if i am asking in wrong thread. i need permissive mode for dolby and viper.. does anyone know the workaround ?
Quicksilver said:
First of all sorry if i am asking in wrong thread. i need permissive mode for dolby and viper.. does anyone know the workaround ?
Click to expand...
Click to collapse
There is a permissive kernel available,here https://forum.xda-developers.com/ga...nt/kernel-galaxy-tab-s3-sm-t820-t825-t3603094
Not sure if its what you need
lupick said:
if you check using DRM info (download it from playstore) is the tablet without libcrypt oem at windevine L1 or L3? on stock rom is L1. Device in L3 can access only SD content.
Try to use the following apk that should force the HD:
https://forum.xda-developers.com/showpost.php?p=75465158&postcount=132
Using this app the streaming quality is better? And the download size?!?
Click to expand...
Click to collapse
Let me clarify:
If I modify the libcrypt oem, the Google Play Netflix app streams HDR perfectly.
The DRM check states L3, but still streams HDR. The only stuff that's broken is the offline download.
There the L3 kicks in and the quality of every donwload is SD. It's the only problem.
I tried the apk you posted but it's exactly the same as the original.
Streams in HDR, downloads in SD.