I have a samsung galaxy s3 international model and
rooted it using Chainfire's CF-Root 6.4 - SuperSU+CWM5.5+CWMManager
Now I did an OTA update of 7mb approx and lost root and tryed to re-flash CF-Root
But im not able to go into download mode in recovery mode?
shotpix.com/images/23588341243990019557.jpg
moreover how do run adb reboot download command?
And on every normal restart the phone shows a message, "Android is upgrading...start applications"
shotpix.com/images/08905428090536950785.jpg
And i tryed to add more OTA updates but the installation fails at 25%, phone reboots and asks me to update via KIES?
Can anyone help me out with this, this is my first android and dont wanna mess up
And do i need to remove supersu and cwm to reroot?
OTA fails if rooted = YES.
You say
But im not able to go into download mode in recovery mode?
Do you mean you cannot boot to download mode >> Or you are looking for download mode in recovery .
Boot into recovery wipe data factory reset flash stock rom via Odin .
jje
My bad, i was rebooting while holding Volume up, and it was volume down
Now phone is booting into download mode, and i have reflashed it successfully.
My first OTA was installed 100%,and that is how i lost root, however second update failed?
And im still getting the "Android is upgrading...start applications"
shotpix.com/images/08905428090536950785.jpg (SCREENSHOT)
Hi, folks,
I have pretty much wasted the past 3-4 hours trying to get cwm superuser to work.
I installed .314 UK generic firmware using FlashTool & unticked wipe data, then used TowelRoot v12 to root then flashed NUT's dual recovery but no matter what cwm superuser flashable zip I use I cant get it to work right, it always prompts me to use recovery install when I open the SuperUser app, tried that but I just get error saying there was a error installing SuperUser. If I disable SuperUser then install SuperSU & SuperSU pro from market I get root access but SuperSU has always had issues with AdAway applying the hosts file so I switched to CWM SuperUser when I was on .402 firmware.
I did have the flashable CWM zip file but can no longer find it
Really need some help with this.
BanziBaby said:
Hi, folks,
I have pretty much wasted the past 3-4 hours trying to get cwm superuser to work.
I installed .314 UK generic firmware using FlashTool & unticked wipe data, then used TowelRoot v12 to root then flashed NUT's dual recovery but no matter what cwm superuser flashable zip I use I cant get it to work right, it always prompts me to use recovery install when I open the SuperUser app, tried that but I just get error saying there was a error installing SuperUser. If I disable SuperUser then install SuperSU & SuperSU pro from market I get root access but SuperSU has always had issues with AdAway applying the hosts file so I switched to CWM SuperUser when I was on .402 firmware.
I did have the flashable CWM zip file but can no longer find it
Really need some help with this.
Click to expand...
Click to collapse
If you're not on CWM, you can't use CWM SuperUser. Install SuperSU and use that. You can also switch to AdFree which is what I use. You'll also need to install XZDualRecovery to be able to write to /system.
Sent from my SGP311 using XDA Free mobile app
Thanks for the reply
I was using CWM superuser with no issues on .402 UK generic & Philz recovery, I have always had issues with SuperSU both on my old Galaxy S3 with custom roms & now on my Z2, most of the time with SuperSU any app that needs root access will freeze due to the delay in SuperSU showing the alert & as I mentioned above with AdAway not being able to apply the hosts file 90% of the time.
I also have Dual Recovery installed but keep losing it, seems that using the NDR tools app it installs causes the phone to forget that the recoveries are installed.
Just want some help with this issue & it would be great if someone could post a working kitkat CWM superuser flashable zip.
Can anyone else help me with this?
Have just done a full wipe & used Flashtool to install UK generic .314, have used EasyRoot 12.1 to root & it says I'm rooted. I then install CWM SuperUser from market & when opening it says the su binary needs to be updated & only gives recovery install or cancel options, I chose recovery & it reboots into Philz recovery & says it has installed but Philz says root is broken. When I boot the phone again I get a notification from SuperUser saying the binary needs to be updated again but when I tap recovery it just says there was a error.
Really would appreciate some help here as I need to get AdAway installed, change the DPI & use the nextapp kitkat SD fix app.
Cheers.
EDIT: forget it, got it fixed myself, now CWM superuser is working fine.
Hi guys so I have recently taken the ota for lollipop after being unable to use mobile odin pro to update to lollipop and keep root. since mobile odin does not flash bootloaders and hidden files the phone simply would not boot and was not going into recovery mode either.
Today I was able to solve this by
first step I odin flashed the ne6 firmware I had to factory reset the phone to get It to boot after downgrading from lollipop
then I towelrooted and installed mobile odin pro
next I used mobile odin pro to flash the lollipop firmware but instead of letting the phone reboot after the flash, I set mobile odin pro to reboot into download mode instead.
from there I pc odin flashed the modem/bootloader file or "firmware only file that Artizan made here http://forum.xda-developers.com/tmobile-galaxy-s5/general/dob1-firmware-file-t3036102
the t mobile screen was taking a long time so I factory reset and then it booted fine
now the strange thing is supersu was able to update the binary and grant permission to both root checker and busybox but neither app is acting properly . they both say that they were granted permission but busybox is not installing and root checker just hangs. oh well at least phone info and cpuz recognize that the phone is rooted but so far root apps are not working properly
So I just successfully installed CM13 on my i9300. Everything works fine, but I just found out I lost root rights.
I went and downloaded the Super SU app from the PlayStore, launched it and that gave an error that there's no SU binary installed and I need to manually root again.
So I downloaded UPDATE-SuperSU-v2.65-20151226141550.zip, put it on the sdcard, rebooted into CWM Recovery, installed the zip and booted back into the system (when prompted to fix boot I selected no as recommended), but now I STILL HAVE NO ROOT RIGHTS and the Super SU app still gives the same error.
Is there a specific SuperSU.zip I should be installing in recovery to make it work?
Or is something wrong with the recovery and do I need to flash that through Odin? (I don't think this is the case though, as flashing CM13 and gapps went completely fine)
Thanks for any isnight and tips
There is already Root option in developer settings.Can you try it?
ArdaCsknn said:
There is already Root option in developer settings.Can you try it?
Click to expand...
Click to collapse
In Developer Options I have set Root Access to Apps and ADB it didn't give any error, but doesn't seem to be doing anything either... In file manager I can't reach root, Root Checker app fails, Super SU gives than binary error, and another app that requires Root Access says I don't have it as well..
warriotox said:
In Developer Options I have set Root Access to Apps and ADB it didn't give any error, but doesn't seem to be doing anything either... In file manager I can't reach root, Root Checker app fails, Super SU gives than binary error, and another app that requires Root Access says I don't have it as well..
Click to expand...
Click to collapse
Flash rom again and dont flash SuperSu its better now without using SuperSU
I got the same problem. I tried to root with odin again but it didnt work...
Flash cm13, wipe data and cache and flash cm13 again. Cm13 should be pre rooted.
Sent from my HTC One M9 using Tapatalk
Hi Guys, I have the same problem too after CM13. Unfortunately rooting again with ODIN flashed stock recovery back and am stuck on CM13 now with no root and stock recovery. Can someone help please? Below is the detailed description of what happened.
----------------------------
1. My Samsung Galaxy SIII International (I9300) was rooted and I had CM11 stable/snapshot version there since last 2-3 weeks.
2. Yesterday, I tried upgrading the latest CM13 nightly for my device.
3. While doing so, and rebooting, it asked me the normal message "root possibly lost, fix, yes or no". I accidentally pressed no.
4. Then I noticed after CM13 was flashed, that I do not have root access anymore. Please note that at this point in time, I was not aware that it has to be explicitly enabled in developer options.
5. I came to know that I lost root when I tried to boot in to recovery (CWM) to install gapps.
6. Now, under the impression that I do not have root anymore, I tried to root again with Odin as I had been doing all these days.
- By doing that, ODIN removed my custom recovery (CWM) and flashed it with stock recovery.
- Though ODIN said PASS after reboot, I still do not have root access.
7. Removed cache, wipe data, and factory reset, multiple times but no help.
8. Enabled root for both apps and adb in Developer options, but no use.
9. I also tried KINGO root ( a very popular tool for SGS3 these days) but in vain.
10. Now, am stuck with CM13 and stock recovery and unable to do anything with ROM manager or anything else as I do not have root anymore.
11. Am able to install few apks for whatsapp and facebook for now and living with it, but it wouldn't let me install playstore apk too anymore.
Highly appreciate any quick feedback.
same here after rooting once cm13 by developer option, for some reason i had to use hide my root app, now unable to get root back
Its a problem with the s3, it forgets root. The most reliable is chainfire and sticking with a stock rom.
You must:
Wipe to factory,
flash an original rom via odin,
Boot straight to recovery and wipe to factory again,
Flash original rom again,
Boot straight to recovery and wipe to factory,
Allow the phone to boot.
You must flash at least twice and reset to factory at least twice, even tho I sad it thrice, to kill all remnants of the old rooted rom.
Then you can flash chainfire via odin and go from there.
Beamed in by telepathy.
Hi.
Wiped my phone today. Installed FlashKernel 1.0.1 and SuperSU from TWRP. Running stock ROM. Then downloaded SuperSU from Play Store. But SuperSU dont detect root.
Before wiping phone root was working fine.
What have I missed?
Solved: I flashed the wrong SuperSU zip-file