Hey, I think the phone is totally brick, can anyone confirm it? Here we go
The phone came totally crazy and it has restart automatically, and went to the Fastboot mode. (i dont know if it was updating something, i had not using it). So, I've UNLOCKED it with the code that Huawei brings, till here everything is fine. The problem becames when I try to flash the CUST, CACHE, ABOOT, and the others that I think that are useless, it says
"FAILED (remote: Command not allowed)". But I can flash SYSTEM, RECOVERY, BOOT and USERDATA correctly. But that doesn't solve the problem of the LOOP RESTART, it show the Logo of Huawei and keeps restarting. I also tried 3 other stock roms, and the problem persists. Also tried putting the dload in SD with the UPDATE.app, and starting the phone with 3 buttons pressed and I have the error of "Error:update.app is a invalid package" and doens't work. (If i go to the Recovery it just stay for 1-2 seconds and automatically restart again). I don't think it could be the power button because it stays well in the Fastboot mode and also tried the CWM and works. I've been searching solutions for around 5 hours and didn't found any. I wish someone could help me, thanks in advance!
PD: I have the ADB Drivers updated.
live it
Related
Hi, i've a strange (but i hope common and resolvable) problem.
After all, i say that i searched through the forum (with the search function) but with the solution that i found and tried i didn't solve anything.
I start saying that i got a p500 with a broken sdcard reader board (it simply doesn't have a microsd 'cause doesn't recognize).
That phone some days ago just shut down and went stuck on the LG Logo.
I tried at first the hard reset (home+vlm down+pwr), nothing happens.
I tried then the recovery mode and try to update with lg updater, and didn't work, lg doesn't recognize the phone on the updater (but on the main screen of the BBc app does).
The last thing that i noticed is that one time, powering on the phone, button's leds flashed about 4-5 times. but if i try to re-do the action, doesn't get anymore.
I would know if there is another way to exit from this stuck-screen.
I also post the log of error i get from kdz:
Upgrade error
WParam: 100
LParam: 500
Here is the log: http://pastebin.com/4SECdaT4
Other things i forgot to say:
I don't need to shake the phone, if kdz doesn't detect, i take off the battery, and turn on the phone in emergency mode (up+back+pwr).
Sometimes kdz works without that error, but it reboots the phone and it stucks again in the lg silver logo.
I read about a wipe of /system through adb, but if i try to mound /system, i get the command list.
I can't do adb devices, doesn't detect the phone, and in sequence to this, can't open the adb shell.
any suggestion?
You recovery got corrupt when it was stuck on LG logo, which could be easily solved by fastboot method of recovery flashing.
I was on the same situation like you are on now. Now follow this:
Try booting into fastboot mode by pressing "Power+ home buttons"
If it does then notify me here or at PM.
Between this is not the appropriate section for this thread.
I tried to fastboot, i did fastboot erase recovery and fastboot flash recovery recovery.img commands, no errors, but when i type fastboot reboot, on the screen i read: rebooting the device, but it doesn't reboot. If i take off the usb cable, (after a big time, 10 mins for example), a --suspend-- appears.
if i take off the battery, the lg logo is stuck again, and if i do home+vol down+pwr the clockwork mod doesn't appear.. any suggestion?
See your PM
Sent from my LG-P500 using Tapatalk
Hi guys, I really need your help.
I'm new at this rooting stuffs and I tried to root my Oppo Neo 5.
I tried so many softwares like OneClickRoot, FramaRoot, and Kingroot but none seemed to work.
So I resorted to an app called oppo tools
It worked at first but I got really annoyed when my status bar suddenly colored to red when my phone discharges to 15% so I unrooted my phone and rooted back again. I really thought that was going to fix my problem but that's where the bootloop issue started.
I tried to flash some custom recovery zip but it failed since I only have a stock recovery.
But the thing is, I found a guide that says to rename the clockworkrecovery img to PG86IMG.zip.
So I did tried that and as soon as I flashed the zip from my stock recovery, my phone hanged.
I long-pressed the power button to restart and boot into recovery mode but nothing seems to happen.
I'll try to explain a bit more on how it looks when I boot my device.
When it boots normally (I mean not pressing the volume to enter recovery mode) it will only show the logo but when I try to go into recovery mode it will show the logo with a little text on the lower left portion "Recovery Mode"
Before I flashed the PG86IMG.zip, recovery mode was still working and the charging screen when off is working too.
but after I flashed the zip, every time I try to recovery mode the logo shows up with the little text but RECOVERY MODE isn't working. When I charge my phone it automatically boots up and shows the logo and text like it's trying to go recovery mode (I'm just trying to charge? It's going to recovery mode)
I tried using "adb devices" on cmd but it's not detecting any devices.
I'm really out of ideas guys, I know not all people use this model but what would be your suggestion?
A suggestion on how to fix this would really be appreciated :good:
I'm sorry I'm really new at this, please correct me if I did something wrong starting this thread. :angel:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Salman Al-Badgail said:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Click to expand...
Click to collapse
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
DeepBricked said:
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
Click to expand...
Click to collapse
You made a soft brick, not to worry flash it with correct stock firmware, if the phone is in warranty than ask them to do flash, this will take approx 10-30min. If it isn't in warranty than you should try it own or else pay some amount and the rest they will do.
Salman.
how about bootloop, cant enter recovery, reboot continiously when turn on even going to recovery, only fastboot isnt rebooting automaticaly but pc days drivers not succesfuly installed, and when off it qont detect by pc because of rebooting auto,
where can i find a rom for my oppo neo 5
pls help me pls
So here is what happened, its simple i was trying to root it, then something bad for god knows what happened, the recovery failed or maybe corrupt so i cant boot into it, then the fastboot also failed so this option also gone, then it was stuck on a bootloop, so with the two options of fastboot and recovery already made corrupt, i read on some forum to use spflash to flash a fresh stock rom, but that also failed (god!!!!!!!!) so probably that made the whole system corrupt, i tried every possible combination out there on the various forums and videos but nothing, it doesnt respond, the one and only thing i get is, it vibrates when i plug in the charger and vibrates again after some time and this thing keeps on, please HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Hello all i have this problem that is bugging me for months now, so my phone suddenly went into bootloop and it's not my first time with this phone doing this but from all the 3 past times i had the bootloop i fixed it by flashing the stock rom and there was only 1 time that my phone got stuck on the green recovery android and i just plug it in my pc and everything worked fine (yes it was weird for me but at the time i thought it was normal).
So now bootloop happen again and i tried reflashing with the stock rom like i used before with spflash tool and i'm always getting stuck on "format 0%" and i get the error of "st_format_" something like this so i tried using fastboot to flash every single image and nothing worked, so after all of this i start to try all kinds of things i found on the internet like, using the fastboot "boot boot.img" and nothing worked i would just get a thing saying "writting boot..." and only would receive a message when my phone battery would be drained out.
So i'm here asking for help if someone know's what's wrong with my phone anything is helpfull, i can provide some info from my phone if anyone wants i will try to add some files with information about my phone.
Thank you.
Phone: Qilive Q4 7" Auchan
CPU: MTK6582
Things i tried:
Miracle box
fastboot using flash/boot/oem unlock and still nothing worked however when i typed "fastboot oem unlock" i would get only 3 dots with infinity waiting time till phone battery would be drained out.
another random scatter file for spflashtool only changed the img names
tried spflashtool to format all except bootloader and still would come with an error of format error and even with the "download only" option i would get an error.
Hello community,
I haven't posted here before, so I hope I'm not doing anything wrong.
I have a problem with my Neffos X1 and after browsing the internet for hours nothing helped so far, so I hope some of you can help me out.
My phone is stuck in a bootloop since yesterday evening. I haven't done any updates or new installations recently, so it just happened out of the blue. It loads till the Neffos logo and then restarts over and over again.
Since I can't take the battery out, I tried letting it run out of energy and then restart, but as soon as I connect it to a power source the bootloop will start again.
I read a lot about getting it in recovery mode or to try and flash it, but no matter what combination of buttons I try, nothing is happening. The phone basically doesn't react to anything and just keeps restarting. The only thing I noticed is, that when pushing both volume keys the screen will just stay black (no restarting), but after letting go the bootloop will start again.
I tried flashing it via SP Flash Tools, but the phone also doesn't react to it.
Lots of troubleshooting guides also require, that I have rooted my phone in the past, unfortunatly I haven't. I also read about unlocking the bootloader, but since my phone isn't reacting to any buttons and my laptop also doesn't seem to recognize my phone (probably because it doesn't boot proberly), that doesn't seem like a solution either.
To summarize: I'm stuck in a bootloop with no recovery mode, no rooting, no unlocking bootloader, probably can only use my laptop to do anything remotely.
So, is there anything you can think of, that might help me get out of the bootloop? Or ideas of what I may did wrong when trying the other solutions?
Thanks for any help in advance.
Same problem
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Shotzo said:
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Click to expand...
Click to collapse
Try this
Download phone's Stock Firmware onto your personal computer.
Install the USB MTK Drivers - NOT ANY OTHERS (skip if you have them already installed).
Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
Click the Scatter-loading button to navigate to the Stock Rom you just downloaded.
Select the Scatter File from the extracted Stock Firmware on your computer.
Select the Download Only in the SP flash tool option
Click the Download button to start the Formating process.
Connect your phone via USB to the computer>> holding volume + and volume – button of your phone at the same time or holding power button only so that the flashing process will starting working
Patiently wait for your device to be formatted.
After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
Unplug phone and boot it up.
If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
Voila, you are all good.