I have flashed whole firmware in fastboot mode with the help of fastboot tool. First i flash preloader. i use this command "fastboot flash preloader preloader.img" after this i flashed boot, recovery and other factory images. but when i m going to flash pgpt.img or gpt.img commad ended up with "PGPT : No partition table found" after this wiped user data and relock the bootloader with this command "fastboot oem lock". when i enter fastboot reboot and hit enter. It ain't gonna boot no recovery & no fastboot. only charging lead blinks and nothing more.
i never flash pgpt.img like this "fastboot flash partition pgpt.img.
Related
Dear Member,
I'm new to rooring and flashing custom ROMS...
i have a folio 100 and after a lot of googling and hardwork i finally managed to root my device on windows XP.. then i tried to install Jelly Bean / CM10 (4.1.1) Alpha 2 - 27.09.2012 from http://forum.xda-developers.com/showthread.php?t=1864774 and followed the instructions.
initially when i typed fastboot devices i was getting "? fastboot" and rest of the commands returned 0x2 error.
then i treid
fastboot -i 0x955 erase userdata
fastboot -i 0x955 erase system
fastboot -i 0x955 erase cache
fastboot -i 0x955 erase linux
fastboot -i 0x955 erase recovery
till now everything worked like a charm but when i tried to run the last command
fastboot -i 0x955 flash recovery recovery-cwm-6.0.1.4.img
i'm getting error message "unable to load recoveryxxxx.img"
now i treid to reboot the device and its saying "magic value mismatch" please help me out..
Nonlxpe Menteur
leaderrocks said:
Dear Member,
I'm new to rooring and flashing custom ROMS...
i have a folio 100 and after a lot of googling and hardwork i finally managed to root my device on windows XP.. then i tried to install Jelly Bean / CM10 (4.1.1) Alpha 2 - 27.09.2012 from http://forum.xda-developers.com/showthread.php?t=1864774 and followed the instructions.
initially when i typed fastboot devices i was getting "? fastboot" and rest of the commands returned 0x2 error.
then i treid
fastboot -i 0x955 erase userdata
fastboot -i 0x955 erase system
fastboot -i 0x955 erase cache
fastboot -i 0x955 erase linux
fastboot -i 0x955 erase recovery
till now everything worked like a charm but when i tried to run the last command
fastboot -i 0x955 flash recovery recovery-cwm-6.0.1.4.img
i'm getting error message "unable to load recoveryxxxx.img"
now i treid to reboot the device and its saying "magic value mismatch" please help me out..
Click to expand...
Click to collapse
First, download the latest & most stable ROM (at the moment), including the ROM, GAPPS, recovery-cwm-CM10-A3.img & formatsd.zip
http://forum.xda-developers.com/showthread.php?t=1864774
Actually, you just need to flash the recovery through fastboot, other else can done in the recovery.
1. Copy all the ROM, GAPPS & formatsd.zip into your memory card. Then insert it into your Folio.
2. Run command prompt, make sure your tablet is connected with your PC in fastboot mode.
To erase existing/stock recovery. In command prompt, go into the fastboot program folder and type the following commands
Code:
fastboot erase recovery
3. Copy the CWM Recovery into your fastboot adb folder.
To flash CWM Recovery
Code:
fastboot flash recovery recovery-cwm-CM10-A3.img
fastboot reboot
4. Enter Recovery. Before you begin, wipe everything (except external_sd) in the CWM Recovery, after wiped, you can install the 3 zip files one by one. After finish, just reboot system.
Full procedure also stated in the link I provided, please scroll down.
Hope that helps you.
So did above solution help? I had a similar issue, and I resolved it by just booting the recovery image from fastboot, i.e.
Code:
fastboot boot recovery.img
Once you get into recovery you can flash an image which will in most cases flash a recovery image along with it. If not, you can try to flash the recovery image again once you've done a full wipe from the booted recovery.
I have a Nexus 4 and I tried to flash a 0.54 modem.img , and incidently used the command "fastboot flash modem modem.img" instead of "fastboot flash radio modem.img"
the device is still in fastboot mode, is there a way to fix what i did ? please help I'm afraid to restart and not be able to start fastboot mode again!
I have flashed whole firmware in fastboot mode with the help of fastboot tool. First i flash preloader. i use this command "fastboot flash preloader preloader.img" after this i flashed boot, recovery and other factory images. but when i m going to flash pgpt.img or gpt.img commad ended up with "PGPT : No partition table found" after this wiped user data and relock the bootloader with this command "fastboot oem lock". when i enter fastboot reboot and hit enter. It ain't gonna boot no recovery & no fastboot. only charging lead blinks and nothing more.
i never flash pgpt.img like this "fastboot flash partition pgpt.img.
Hello. I wanted to flash a stock ROM on my Xiaomi Mi3 (Not Mi3W) and I downloaded an official stock ROM and flashed it using Fastboot.
Here's where I think I messed up. I used the "fastboot erase userdata" on the phone and when it booted up, The system storage is showing fine when I go to settings > storage but the internal storage is showing up as 0.00b and I cannot install any applications.
I've tried reflashing but nothing is working. Any ideas on how I can get it to work? Thanks.
Try to flash again with fastboot but with following comands:
Enter the following commands below by order:
fastboot erase cache
fastboot erase userdata
fastboot erase system
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot-bootloader
boot.img ,recovery.img and system.img it should be inside your stock firmware.
Teddy Lo said:
Try to flash again with fastboot but with following comands:
Enter the following commands below by order:
fastboot erase cache
fastboot erase userdata
fastboot erase system
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot-bootloader
boot.img ,recovery.img and system.img it should be inside your stock firmware.
Click to expand...
Click to collapse
After much Googling, I was finally able to 'reset' the whole android partition system by flashing a CWM recovery, booting into it, and using ADB to fix it all.
Thank you for bothering to reply my at all. You're amazing.
You Welcome
My Venue 8 started with a whiter bar at the bottom of the screen. I've updated it as this link "opensource.dell.com/releases/Venue_8_3840_Merrifield". It's ok but slowly. So I edit some line in "P802_flash_device_wifi_only.bat". I added 2 line "fastboot erase config" and "fastboot erase factory" in partitioning command. After that, my Venue can't boot. After Dell logo, screen is black. It still can go to fastboot. I try flash rom again with original "P802_flash_device_wifi_only.bat" but there is no diffrence. May 2 lines I added cause this problem? If so, how to resolve the problem? Please help me.
original "P802_flash_device_wifi_only.bat"
Code:
fastboot oem start_partitioning
fastboot flash /tmp/partition.tbl partition.tbl
fastboot oem partition /tmp/partition.tbl
fastboot erase system
fastboot erase cache
fastboot erase data
fastboot erase logs
fastboot oem stop_partitioning
fastboot flash boot boot.img
fastboot flash fastboot droidboot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash splashscreen_7 oemlogo_7.bin
fastboot flash splashscreen_8 oemlogo_8.bin
fastboot flash dnx dnx_fwr_PRQ.bin
fastboot flash ifwi for_product_ifwi_PRQ.bin
pause
fastboot reboot