guys
I tried this charger believing the reviews but it's 40% slower than my OEM charger that came with the phone.
http://www.amazon.com/gp/product/B00QTE09SY?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s01
Has anybody reliably tested these fancy dual-port chargers that actually work as fast as the OEM?
Thx
unless its a quick charge 2.0 dont expect it to charge as fast as the turbo charger, aukey make dual port chargers that have one quickcharge 2.0 port and another high amperage port
I should have looked for that - these days buying electronics on amazon can be confusing
Hi, does our g5 charger support qc 3.0 ? Output is rated at 5V 1.8A and 9V 1.8A and that is QC 2.0
quote : '' Specifically, Quick Charge 3.0 offers a more granular range of voltages: 200mV increments, from 3.6V to 20V. That way your phone can target one of dozens of power levels. ''
So we need to buy another qc 3.0 charger to use this qc 3.0 technology ?
QC 3.0 charger specs:
Output: 3.6-6.5V/3A 6.5V-9V/2A 9V-12V/1.5A
this is so stupid, and I was wondering where is that 80% in 35mins they are talkin bout......
NeoDJW said:
Hi, does our g5 charger support qc 3.0 ?
Click to expand...
Click to collapse
Hi,
No it doesn't support QC 3.0. The QC logo is missing and "Fast Charge" isn't the same.
There is a compatibility list of QC 3.0 chargers on Qualcomm's website. I am not allowed to post external links, so you'll need to use Google. Sorry for that...
Best wishes,
Alex
I bought car charger with qc 3.0 and that's it
NeoDJW said:
I bought car charger with qc 3.0 and that's it
Click to expand...
Click to collapse
i have too but i don't note any difference in charging speed (by using ampere widget) comparing to stock charger. they both reach about 2500/2800mah while in standby
albenex said:
i have too but i don't note any difference in charging speed (by using ampere widget) comparing to stock charger. they both reach about 2500/2800mah while in standby
Click to expand...
Click to collapse
Ampere measures only mah's , not Voltage, so what did you expected to see from ampere ? Mah's are the same, voltage is diferent, diid you even read what I wrote ?
DavidFlint said:
Hi,
No it doesn't support QC 3.0. The QC logo is missing and "Fast Charge" isn't the same.
There is a compatibility list of QC 3.0 chargers on Qualcomm's website. I am not allowed to post external links, so you'll need to use Google. Sorry for that...
Click to expand...
Click to collapse
it does support qc 3.0 -.-
http://www.androidpolice.com/2016/0...qualcomm-quick-charge-3-0-compatible-devices/
https://www.qualcomm.com/products/snapdragon/quick-charge
and @op: lg was stupid and only shipped qc 2.0 chargers with the phone
lolmensch said:
it does support qc 3.0 -.-
Click to expand...
Click to collapse
Indeed, the LG G5 supports QC 3.0. But the bundled wallcharger doesn't (maybe different depending on purchase region).
I got the LG MCS-H05ER (European plug type C) bundled with my phone. It provides either 9V 1.8A or 5V 1.8A. When I use that one, there is no indication of fast charging on the phone. When I use the separately purchased QC 3.0 compatible wallplug Aukey PA-T14 (3.6V-65.V @ 3A; 6.5-9V @ 2A; 9-12V @ 1.5A) the phone shows a notification about fast charging.
I think it's relevant which cable is used for QC 3.0. I've bought an 1.8m USB-C cable where fast charging doesn't work at all. With the original USB-C cable which was bundled QC 3.0 works.
Best wishes,
Alex
Hey all im new on this forum and apologize if this question was already answered previously..
I just bough this amazing tablet and i had to buy a charger for that .. so i think i made a mistake on buying the charger ?!
My question is will this charger wont damage the tablet ? is it safe to use it ?
Im not very expert on this subject so ill just post the details and wait for your answers ..
AUKEY PA-T9 Charger Specifications:
Usb output : DC 3.6-6.5V 3A.
Quick Charge 3.0 : 6.5V-9V 2A. 9V-12V 1.5A
Nvidia Shield K1 Specifications:
5-12VDC, 2A
Thanks for your support!
I've the same charger just 2.0 and my tablet exploded. Just kidding! That charger works fine.
Niii4 said:
I've the same charger just 2.0 and my tablet exploded. Just kidding! That charger works fine.
Click to expand...
Click to collapse
Eheh it will not over heat the tablet ? You got the Aukey 2.0 ?
No overheating.
I also have an Anker charger but that one makes the touch screen laggy sometimes.
Charger
Chrow said:
Hey all im new on this forum and apologize if this question was already answered previously..
I just bough this amazing tablet and i had to buy a charger for that .. so i think i made a mistake on buying the charger ?!
My question is will this charger wont damage the tablet ? is it safe to use it ?
Im not very expert on this subject so ill just post the details and wait for your answers ..
AUKEY PA-T9 Charger Specifications:
Usb output : DC 3.6-6.5V 3A.
Quick Charge 3.0 : 6.5V-9V 2A. 9V-12V 1.5A
Nvidia Shield K1 Specifications:
5-12VDC, 2A
Thanks for your support!
Click to expand...
Click to collapse
Hi I have NvidiaShield K1 and I'm using this charger :Syncwire 4-Port Travel charger . It has 2 usb port x 1.5A and 2 usb port x2A . And I have quick charger 3.0 from my phone and I made some tests:
No matter if I change on 1.5A or 2A or quick charger its same.... Because the tablet when i play and charge at same time max needs 1560mA .. ex. Charger i mentioned is excellent aftter long time of playing and charging it's still cool... Sorry for my bed English and I hope You will find this information helpful..
zlatkomas said:
Hi I have NvidiaShield K1 and I'm using this charger :Syncwire 4-Port Travel charger . It has 2 usb port x 1.5A and 2 usb port x2A . And I have quick charger 3.0 from my phone and I made some tests:
No matter if I change on 1.5A or 2A or quick charger its same.... Because the tablet when i play and charge at same time max needs 1560mA .. ex. Charger i mentioned is excellent aftter long time of playing and charging it's still cool... Sorry for my bed English and I hope You will find this information helpful..
Click to expand...
Click to collapse
Thanks for your reply appreciate your words
I used a generic charger of my old Iconia W4 which has Output 5.35V === 2.0A and it charged the tablet just fine. I read online that usb can tolerate a difference in voltage of 0.5V so this everything in range of 4.5V <=> 5.5V should work fine
I have the powercore+, works fine on my s7 edge, on my new s8 it only shows 'cable charging', not fast charging. Any ideas?
alexkaye said:
I have the powercore+, works fine on my s7 edge, on my new s8 it only shows 'cable charging', not fast charging. Any ideas?
Click to expand...
Click to collapse
Try another cable just to make sure its not that
does s8 have quickcharge 3.0 for both exynos and snapdragon version ?
spinkick said:
Try another cable just to make sure its not that
Click to expand...
Click to collapse
Just tried all the cables, no joy. Annoying, I ordered this before getting my S8, now it's a useless brick
crap, i have a speed core 2 coming from anker, hopefully it works.
spinkick said:
crap, i have a speed core 2 coming from anker, hopefully it works.
Click to expand...
Click to collapse
Can you let me know? I just emailed their support. Annoying
alexkaye said:
Can you let me know? I just emailed their support. Annoying
Click to expand...
Click to collapse
Sure will. Comes tomorrow!
Not just different cable, make sure to try with the OEM cable first.
If it doesn't work, this is mine and it works pretty well. I tested it on S7, Note 7, S8+ and also use it to charge my Nintendo Switch through USB-C.
https://www.amazon.com/gp/product/B019IFIJW8/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
shinew said:
Not just different cable, make sure to try with the OEM cable first.
If it doesn't work, this is mine and it works pretty well. I tested it on S7, Note 7, S8+ and also use it to charge my Nintendo Switch through USB-C.
https://www.amazon.com/gp/product/B019IFIJW8/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Click to expand...
Click to collapse
Yup, tried it with the OEM cable and third party cables... Thanks for that link - seems a little big in comparison, but will check it out!
Same here. Tested with original cable and Aukey USB 3.0 cable. Doesn't work. However, use Wall Charger with the same cable does work with quick charge.
Make sure to charge your phone sparingly or youll kill the battery cell life faster shorter charges throughout the day is healthier for the battery, and considering its a nonremovable battery this is a must know.
I was going to say, "Make sure you have fast cable charging enabled." But, fast charging doesn't work on my Anker Powercore + 26800 . Not much of a bummer to me as I've had the powercore for quite some time now, but I'd like to see the S8's technology used to its potential.
Hey guys, so i got the anker powerport speed 2 and it works fine. Here is the link to the one I have. By fine, I mean it fast charges.
https://smile.amazon.com/gp/product/B01IUSYF8G/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I think it's more that older model doesn't support quick. charging with the USB c , I just ordered xiaomi power bank 2 because it's confirmed to quick charge with s8
My QC 3.0 wall chargers both reported fast charging, but QC 2.0 doesn't (Car charger, powercore+). Perhaps they change the definition of quick charge to QC 3.0?
I'm curious as to exactly which batteries you're trying, and are you sure the cable is plugged into a port that supports QC2 or QC3?
We had a discussion a while ago about batteries... see -> https://forum.xda-developers.com/galaxy-s8/accessories/external-batteries-t3582498
Short version... the the stock USB-A to USB-C cable that came in the box with my Verizon GS8+ (Snapdragon processor) works to quick charge with the following batteries and chargers (Phone indicates FAST CHARGING).....
older Anker Powercore+ 10050 (which supports QC2 output on its single port) They have since released an upgraded model that supports QC3
The QC2 port on my Anker PowerPort 6+ (it was QC2 when I purchased in January, and they have upgraded the model they are selling now to support QC3).
the QC2 port on my Aukey 10400 battery w/QC2 support on its single port.
Tronsmart 5 Port USB charger w/QC2 support on every port
The QC3 port on my Anker PowerPort 2 (the PowerIQ port doesn't support QC2 or 3)
The QC3 port on my RAVPower 20100mAh battery. Of course using the battery's USB-C port and a USB C to USB C cable, it does not fast charge. Using the "Smart 2.4A" port also doesn't fast charge. (that is expected because the "smart" and USB-C ports do not support QC2/3).
It also works with Choetech USB-A to C cables, and Anker USB-A To C cables
I just got a Verizon Galaxy S8... It acts the same as the GS8+. All of the above works as expected.
---------- Post added at 04:46 PM ---------- Previous post was at 04:38 PM ----------
failure_2_win said:
I was going to say, "Make sure you have fast cable charging enabled." But, fast charging doesn't work on my Anker Powercore + 26800 . Not much of a bummer to me as I've had the powercore for quite some time now, but I'd like to see the S8's technology used to its potential.
Click to expand...
Click to collapse
Dumb question I know, but I gotta ask... Anker's listed for the PowerCore+ 26800 on their web site -> https://www.anker.com/products/A1374011 indicates it only supports QC on ONE of the 3 USB ports. Are you plugged into the right port?
KidJoe said:
Dumb question I know, but I gotta ask... Anker's listed for the PowerCore+ 26800 on their web site -> https://www.anker.com/products/A1374011 indicates it only supports QC on ONE of the 3 USB ports. Are you plugged into the right port?
Click to expand...
Click to collapse
Yeah I'm using the correct port. Anker color codes which ports support QC. I noted that my Anker PowerDrive +2 fast charges the S8 with the same cable I used for my PowerCore+. So I did a little research.
The PowerDrive+ 2 supports QC 3.0. The PowerCore+ 26800 being sold on Anker's website supports QC 3.0 as well. I guess I have the older gen of the PowerCore+ 26800 because it's labeled as QC 2.0.
My assumption is that Samsung Fast Charging is compatible with QC 3.0.
failure_2_win said:
...The PowerDrive+ 2 supports QC 3.0. The PowerCore+ 26800 being sold on Anker's website supports QC 3.0 as well. I guess I have the older gen of the PowerCore+ 26800 because it's labeled as QC 2.0.
My assumption is that Samsung Fast Charging is compatible with QC 3.0.
Click to expand...
Click to collapse
Well, my Samsungs (S6, Note 5, S6 Edge+, S7, S8, S8+, and Tab S3) do quick charge with my QC2 stuff... as well as my QC3 stuff. So if your Anker supports QC2 output, it should fast charge the GS8.
hmm.... No idea why it doesn't.
(I know some of the Anker PowerCore and PowerCore+ support QC only on input, to charge the powercore itself, but not output which can get really confusing, and is my only beef with Anker's products... that isn't the case here though)
EDIT: Sorry, the Galaxy Tab S3 only fast charges with my chargers/batteries that support QC3.
I also have a Anker PowerCore+ with Quick charger 2.0 and it does not fast charge my S8+. I also have a CHOETECH with Quick charger 2.0 and it does not fast charger my S8+
mike26301 said:
I also have a Anker PowerCore+ with Quick charger 2.0 and it does not fast charge my S8+. I also have a CHOETECH with Quick charger 2.0 and it does not fast charger my S8+
Click to expand...
Click to collapse
Do you have a Snapdragon based S8+? I'm guessing Yes, since you are marked with Sprint. (I ask because I don't know how fast charging on the Exynos chip based phones works)
Which model PowerCore+? This is where Anker gets confusing... For example, the PowerCore+ 13400mAh supports QC2/3 to re-charge itself, but doesn't output QC, it only outputs the standard 5/2.4A . If that is the one you have, it wont fast charge the S8/S8+. And this PowerCore+ 20100mAh doesn't support QC at all (for input or output). Same with the PowerCore+ Mini which only supports 5v/1A input and output. So they wont Fast Charge the S8/S8+ either.
Where as the PowerCore+ 10050mAh recharges itself at the standard 5v/2A, but DOES Output QC3 (the original model was QC2 when first released). This one SHOULD Fast Charge the S8/S8+ (from experience, I can say mine does). The PowerCore+ 26800 only supports QC3 on a single designated port, so using that port, it should Fast Charge the S8/S8+. (I don't have this battery, so I can't confirm)
With reports of unable to Fast Charge using these QC2/QC3 batteries and chargers... I wonder if Samsung got something messed up in the phones? (I remember having issues with older Motos and my QC2 stuff... where the Motos didn't charge properly but my Samsungs did). Or could it be firmware/rom related from different carriers? Like mine is Verizon and works, and yours is Sprint...