Hi all,
I have a yu yunique mobile which I got from my friend. He said the mobile is not working. I wanted to re-use that mobile. The Mobile is not switching on. If USB is connected, observed red led on near the front speaker. I searched the internet and got to know that If red led is on near the speaker, then most likely it is a hard brick. If I connect my mobile to PC, PC is not able to detect the mobile. I install all qualcomm drivers. Can any one help me to revive this phone? Is it really hard bricked? If it is hard bricked is there any way to revive this device? Thank you.
now i can able to detect my mobile in my pc. I removed the battery and connected the usb. since battery was not removable, I unplugged the flex connector which connects battery to the main board. with this I can able to flash the device using qfil. but after flashing is success I connected the back the battery. NowI am not able to see any activity on phone. Now that red led is not on. but nothing is happening.
Now i am able to boot up the device guys. When device was not working , I saw a video to revive this device. He suggested to short BOOT and 1P8 pin in the mother board. I did that, then after flashing the didn't removed that short. So after removing the short It worked fine....
bro please help me im on the same situation my yunique yu4711 hard bricked and its detects as qualcomm 9008.. how did u make it...please write details and gimme the qfil and flashing tools details please bro....
Related
Hello I'm new to this scene and I apologize I don't really know what I am doing.
I ordered the A660 from an amazon seller and I could not get the phone to show anything past the Lenovo Logo upon power on. I could get into the android recovery but in the internal memory were only empty folders. I don't yet have a micro SD yet so I proceeded to search the internet for a way to get my phone working. I came across several forums about flashing and what not and proceeded to download and installed MediaTek DA USB VCOM port drivers and smartphone Multi-port download tool [v3.1228.00-A2012.08.03]
I proceeded to try to get the phone to connect to windows so it could be connected. I got a 'dl error' message in super multi-port tool (see pic 1) and am now worried that I bricked my new phone. PLEASE say it ain't so. It still shows up in device manager for a while when I plug it back in but does not charge or bring up the Lenovo branding on the phone anymore. Pic below represents where I am at.
**Update***
Seconds pic shows what sp flash tool says.
your issue is not SW
it is HW
i had same issue, they why the seal the phone in cheep price, as it have HW issue.
if you take the battery and charger with any multiply battery charger, the phone will work.
issue the phone dose nt charge anymore by it self
http://www.youtube.com/watch?v=qPlnlnikQtk
see this video, it is for my mobile
Hi guys, I believe I have hard bricked my phone.
I was trying to solve the IMEI lost by installing these bins files (www movilesdualsim dot com/threads/ayuda-con-i9500-s4-with-mtk6589-quad-core-5-0-screen-1920-1080.47124/) using SP_Flash_Tool_v3.1304.0.119, so I was doing so and when SPFlash has finished the phone doesn't boot up anymore. I have tried to flash recovery.img with SP Flash but it doesn't even detect the phone anymore.
When I connect the phone to the PC by USB cable I can heard the connected device sound going on and off and looking the windows device manager I can see a "Alcatel Single RNDIS Interface" device connected but like I said it goes on and off every 5 seconds or so. If I put the battery on the phone it doesn't make any different.
I would appreciate so much if anyone could help me out. I don't usually bother people asking for help but I can't really find how to fix this issue and I don't know if it is even possible to fix it.
Thank in advance
pepeg said:
Hi guys, I believe I have hard bricked my phone.
I was trying to solve the IMEI lost by installing these bins files (www movilesdualsim dot com/threads/ayuda-con-i9500-s4-with-mtk6589-quad-core-5-0-screen-1920-1080.47124/) using SP_Flash_Tool_v3.1304.0.119, so I was doing so and when SPFlash has finished the phone doesn't boot up anymore. I have tried to flash recovery.img with SP Flash but it doesn't even detect the phone anymore.
When I connect the phone to the PC by USB cable I can heard the connected device sound going on and off and looking the windows device manager I can see a "Alcatel Single RNDIS Interface" device connected but like I said it goes on and off every 5 seconds or so. If I put the battery on the phone it doesn't make any different.
I would appreciate so much if anyone could help me out. I don't usually bother people asking for help but I can't really find how to fix this issue and I don't know if it is even possible to fix it.
Thank in advance
Click to expand...
Click to collapse
Hi, you solved your problem? I have the same issue, help me
I have an LG P769 that I would like to make work again. I am a complete noob. I tried to find an existing posting that would help but the search tool isn't working for me and my issue appears unique.
My phone appears entirely dead. Whether I put in a battery (I bought a brand new one) or have it plugged into the USB port there is no LED on the phone and no video whatsoever. The phone is not responsive at all to any button presses.
I can plug the phone into the computer and the computer recognizes it. I have already installed the drivers for it. I also downloaded OMAP4boot and have run it and it sees the phone when I plug it into the USB port.
None of the instructions I've found so far do anything for me. I can't get anything downloaded into the phone. I can't get the phone to respond or to show anything.
Can someone please point me in the proper direction?
Thank you.
hey all,
So i have an android phone, Umi London.
my father destroyed it... deleted rverytrhing....
the phone wont power on..
with charger, without charger, i changed the battery nothing.
tried to use hard reset, soft reset... nothing..
but when i plug it in the computer and no responded from the phone... But the computer is making noise that something is plugged-in..
i cant find nothing.. on the device manager... but it making a sound of something connected.. and after 1-2 minute it disconnect..
and then repeat....
i also tried to see if maybe ADB will recognize him... (adb devices) but no luck.
So. if there is a solution.. only you guys can help me.
plz help.
im using windows 10, and all the drivers are updated (used it to change firmware and os for OnePlus1 ).
thank you in advanced..
I bricked my phone, I was on Oreo B360. I decided to use DC-Unlocker service and paid 19€. When flashing my phone with DC Phœnix, my computer turned off(because it is old and have some battery problems). No my phone don't turn on and isn't detected by the computer. I have no access to fastboot.
It is HardBricked.
Does anyone has a solution?
Thank you in advance!
Very old thread, haven't seen it but will bother to reply. I had same situation with my other manufacturer's phone. I flashed and accidentally removed USB cable and then couldn't revive the phone. Your motherboard may be corrupted now and only way to get it back is to use test point or replace motherboard