greetings from the caribbean i have a z5 compact
when i make video recordings i hear alot of static and can barely hear myself
when i do a microphone diagnostic i only hear static
when i receive or make a call i cannot be heard by the other person unless i use the loudspeaker
when i try to send a voice note via whatsapp the other party only hears static
i have already started safe mode and factory reset and already did the pc companion software repair and same problem ?
any recommendations? thanks in advance
Related
I'm totally confused, whenever my X10 paired with MW600 use for media audio, the incoming call ringtone became crazy, it just like double the play speed. I try to flash the audio lag fix from zdzihu, it became worse: the phone totally go mute when there's an incoming call. I missed a lot of calls. Can some one fix this problem?
system/lib
libaudio.so
libaudioflinger.so
libaudiopolicy.so
libmedia.so
Stock rom from vmcms is perfect if he can fix this problem I hope anyone can help him to fix that.
http://forum.xda-developers.com/showthread.php?t=1307572
Hi
Has tried this?
I have this headset and I have this problem, provided you have the option properties off the multimedia, because if not, you will not hear the ring tones, and must always have the earpiece in the ear to hear the Call Ringtone entrants, so I say you can use the hands free and be careful not to lose incoming calls.
Best regards
Haha, good idea~ if there's a widget to switch multimedia mode it would be better;p
Thank you, dear~
I have a strange problem with Xperia Go phone and bluetooth headset. My voice is distorted in the direction to person whom I'm speking and I can not use the headset as daily use.
It seems like the microphone gain is set full-time maximum. If I talk quietly the sound is clear, but if I raise my voice it get distorted.
And this is not just me, some of Xperia (Go/U/P) phone owners report same problem in Sony Xperia™ support forum. For some strange reason, some users do not seem to have any problems?
I've tried three different Xperia phone and five different bluetooth headset device, all have the same problem. Other brand phones with headsets working as it should.
The same problem occurs with a stock ICS / JB and CM9.
How the headset microphone gain is adjusted, is there some mechanism for feedback from the phone? Does anyone here have the same problem?
I had this problem a while ago, Xperia U with Jabra CLIPPER, after using the "repair my phone" functionality in PCC, so contacted the customer support in Jabra and they told me to wait until the battery dies, then recharge, also to use it with Wi-Fi disabled, does not really make sense to me but noticed some improvements, finally sold it, and used a wired headset instead... sad but true...
I have also tried everything to fix the problem: wlan off, charging, screen off, repair phone and hf software, isolated phone to another room (to see if internal mic is active same time with bluetooth mic), tried every settings in audio.conf etc.
I have noticed that the "distortion threshold" depends on bluetooth device - the more expensive device (more sensitive microphone?) - more distortion.
Also, Jelly Bean brought little improvement in the situation, but it does not fix it completely.
Does anyone have an interest / skills to investigate the problem more? Is it possible to monitor messages on phone and the bluetooth device to see if the phone tells bluetooth device to set mic gain at maximum?
seems like my xperia go also having the same problem.. when using bluetooth headset, people cant hear my voice clearly, the mic too sensitive causing my voice distorted, and this problem only happen when using bluettooth headset. tried with a few different bluetooth headset and the problem still there.. any solution for so far? can this problem solve by sending phone to sony service center?
Hello, first of all my english isn't good enough to describe all i want to say, i hope it's enough understandable.
My device xperia z3 (D6653) has a problem on speaker with incoming calls and activate loudspeaker phone during phone calls, the ringtone is too low.. as well as my speaker in phone calls.. the music is working fine and loud as it should be (both speaker work, top and bottom) but when somebody call me the phone rings too low even though every volume level is set to max! it's even more weird because when i go to "phone ringtone" like i would to set a new one, when i play the ringtone i already put or any another one the volume is normal as it should be and both speakers work.. but the problem still goes on when somebody calls me the bottom speaker only working and the phone sound is too low to hear of course as i mentioned when i active phone speaker during a call the bottom speaker still only working and i can't hear the caller while no sound or noise near me (quite place)!!
please help me, i am really very very disappointed.. i am missing most of my incoming calls because of this, and i can't hear the when loudspeaker is activated in calls..
P.S: the phone sound overall become a bit low but pretty noticeable after lollipop update or whatever i don't know, it was more louder when i bought it new, btw the speaker issue is remained the same when it was new though..
Build number; 23.4.A.0.546
Thanks.
please anybody help me!! i need a new software to solve this problem.. i can barely hear my phone ringing or even loudspeaker during calls...
Jeinyx said:
please anybody help me!! i need a new software to solve this problem.. i can barely hear my phone ringing or even loudspeaker during calls...
Click to expand...
Click to collapse
You will have better luck asking here:
http://forum.xda-developers.com/z3/help/sony-xperia-z3-help-thread-t3164306
That's where the experts for your device are located.
Hallo everybody,
I have Bluboo Maya Max with the latest original firmware (DK9F23WAE.LTXI.H.SCS8.0419.V3.07) and did not try to root the device or change anything related to audio setup.
When I try to use Maya Max for VOIP calls (only audio-calls) with Whatsapp or Skype - it works good, the other side (the person I am calling) can hear me as well as when I call directly, i.e. VOIP audio call is very good and I can hear the other side very well.
However, when I try to do a Video-Call through Whatsapp or Skype (or any other Videocall app) - the video (picture) is good (in both direction), I can hear and see the other side very well, they can also see me very well, BUT: the other side can not hear me or hears me very badly !!!! As if my microphone volume is
I could not find any setup option to increase the microphone volume.
It is the same no matter what Internet speed I have and no matter if it is LTE or WiFi-DSL-connection. As if the phone uses another microphone or different audio-setup setting/volume when I try to do the Video call . This is specific to my phone (Bluboo) since when I use another phone (Laegoo or Samsung S6) at the same place/time and with the same Internet connection method - the other side can hear me and see me very well (so it is not problem of the I-net connection speed).
Does anybody have an idea why is this happening and how could I solve the problem?
Thanks for your help/suggestions.
Pavana
Did you ever find a fix for this?
I installed [ROM][UNOFFICIAL][m8qlul] LineageOS 15.1 for HTC One M8s a few days ago and have encountered an issue where audio seems to work fine on normal calls, WhatsApp calls, and in video, but in WhatsApp (and Messenger) video calls although I can hear and see the other person they can see me but cannot hear me.
All permissions for WhatsApp are enabled. I cleared data, uninstalled, rebooted, and then reinstalled but observed the same issue.
Is there anything else worth trying?
Did you find a fix @runswithascript ?
Hello everyone
I bought Amazfit GTS 2 recently. It's a great smartwatch. One of its options is connecting the watch to the phone through Bluetooth and then I'm able to receive incoming phone calls on the watch, answer them and speak with the watch's microphone. It is a very useful option, however I have found one problem I need help with:
1) When I set the watch to receive incoming phone calls, as mentioned above, then the problem is that when I CALL someone (an OUTGOING phone call) I am NOT able to switch to speakerphone... What happens is that the phone call screen shows that the phone is connected to Bluetooth (GTS 2) and there's no option to switch from that to "speaker"....
Is there any option to keep the incoming calls through the watch option WITHOUT losing the ability to switch to speaker mode on outgoing calls?
Anyone has a solution?
2) Additional little question: I read that the GTS 2 is "5ATM" in water resistance.. now, this specific watch has a speaker and a microphone, so I was wondering- does 5ATM mean I can actually swim with the GTS 2 underwater in a pool? The microphone socket/the microphone itself won't get damaged from the water? Water won't be able to penetrate the watch through the speaker?
Any help with my questions above will be appreciated..
Thanks in advance..
milover20 said:
Hello everyone
I bought Amazfit GTS 2 recently. It's a great smartwatch. One of its options is connecting the watch to the phone through Bluetooth and then I'm able to receive incoming phone calls on the watch, answer them and speak with the watch's microphone. It is a very useful option, however I have found one problem I need help with:
1) When I set the watch to receive incoming phone calls, as mentioned above, then the problem is that when I CALL someone (an OUTGOING phone call) I am NOT able to switch to speakerphone... What happens is that the phone call screen shows that the phone is connected to Bluetooth (GTS 2) and there's no option to switch from that to "speaker"....
Is there any option to keep the incoming calls through the watch option WITHOUT losing the ability to switch to speaker mode on outgoing calls?
Anyone has a solution?
2) Additional little question: I read that the GTS 2 is "5ATM" in water resistance.. now, this specific watch has a speaker and a microphone, so I was wondering- does 5ATM mean I can actually swim with the GTS 2 underwater in a pool? The microphone socket/the microphone itself won't get damaged from the water? Water won't be able to penetrate the watch through the speaker?
Any help with my questions above will be appreciated..
Thanks in advance..
Click to expand...
Click to collapse
I have the same and this feature only works for incoming calls.
The water resistance reaches 50 meters, there should be no problem in the pool.