Please read carefully it is different from other cases..
I just got my new phone and it is Honor 5x, I set it up normally as you do on any new phone before using it. I had not done anything else at this point but follow the directions given and the phone was behaving fine. There was a software update and I started it, but then when it went to reboot, it stayed frozen at the Honor logo screen. I have tried various things and looked everywhere. I tried going to the Emui menu and I tried the "factory reset" option and it got up to 15% before saying that it failed, forcing me to shut it down. No matter how many times I try to reboot the phone, it stays at that same logo screen. If I press the volume keys and the power button, it takes me to the download screen but does not pass 0 . I have tried to manually install the update by the use of an SD card. When I tried it after I mounted it on the card, it got to maybe 10% before saying the software update failed and forced me to shut the phone down again. When I tried recovering from the erecovery menu, after connecting to my wifi, it said it failed to get package info and again I had to shutdown the phone. I tried redownloading the update and doing it again incase it somehow downloaded wrong on my laptop but it still has done no change. The farthest I got was when I put the update on the SD card before it failed. I need a solution please help me it's been days and i havent found something yet
Lasisi said:
Please read carefully it is different from other cases..
I just got my new phone and it is Honor 5x, I set it up normally as you do on any new phone before using it. I had not done anything else at this point but follow the directions given and the phone was behaving fine. There was a software update and I started it, but then when it went to reboot, it stayed frozen at the Honor logo screen. I have tried various things and looked everywhere. I tried going to the Emui menu and I tried the "factory reset" option and it got up to 15% before saying that it failed, forcing me to shut it down. No matter how many times I try to reboot the phone, it stays at that same logo screen. If I press the volume keys and the power button, it takes me to the download screen but does not pass 0 . I have tried to manually install the update by the use of an SD card. When I tried it after I mounted it on the card, it got to maybe 10% before saying the software update failed and forced me to shut the phone down again. When I tried recovering from the erecovery menu, after connecting to my wifi, it said it failed to get package info and again I had to shutdown the phone. I tried redownloading the update and doing it again incase it somehow downloaded wrong on my laptop but it still has done no change. The farthest I got was when I put the update on the SD card before it failed. I need a solution please help me it's been days and i havent found something yet
Click to expand...
Click to collapse
Well I have no idea how much experience you have with Honor phones but you do realize that their are no less than 6 varent of this phone
Are you sure your downloading the correct files for your model?
Are you using the dload/update.app method to update?
Did you unlock the bootloader?
Flash TWRP?
Sent from my LEX727 using Tapatalk
try booting into huawei erecovery and pressing "flash latest firmware and recovery"
clsA said:
Well I have no idea how much experience you have with Honor phones but you do realize that their are no less than 6 varent of this phone
Are you sure your downloading the correct files for your model?
Are you using the dload/update.app method to update?
Did you unlock the bootloader?
Flash TWRP?
Sent from my LEX727 using Tapatalk
Click to expand...
Click to collapse
This is actually my first time with huawei devices but i made sure i downloaded the right firmware no result!!
Also unlocking the boot loader asks for stuffs such as build no device id etc but i dont know how to do this because the phone isnt booting up
About flashing twrp I have no idea what this is about but i think it also has something to do with unlocking bootloader which i am unable to do without getting the phone to boot to homepage
Thanks for d reply how else can you help me pls!!
Abhaypraseeth said:
try booting into huawei erecovery and pressing "flash latest firmware and recovery"
Click to expand...
Click to collapse
I understand booting into erecovery but i dont understand pressing flash latest firmware and recovery please expanciate. Thanks
Lasisi said:
I understand booting into erecovery but i dont understand pressing flash latest firmware and recovery please expanciate. Thanks
Click to expand...
Click to collapse
i mean to say this see the attachment you see the second option that is the one to click and then it will ask to connect to wifi and then it will start downloading (aprox 10mins) and then install the latest firmware and recovery (be warned this will wipe your device and upgrade to latest version and you will lose root and twrp:good
Abhaypraseeth said:
i mean to say this see the attachment you see the second option that is the one to click and then it will ask to connect to wifi and then it will start downloading (aprox 10mins) and then install the latest firmware and recovery (be warned this will wipe your device and upgrade to latest version and you will lose root and twrp:good
Click to expand...
Click to collapse
he said he already tried that
When I tried recovering from the erecovery menu, after connecting to my wifi, it said it failed to get package info and again I had to shutdown the phone.
Click to expand...
Click to collapse
@Lasisi list your phone model and the file your trying to use (a link)
Also list what software version you were on and what the update is listed as
are you putting the file update.app in a folder called dload on the ext_sdcard and rebooting to erecovery by shutting off the phone and then holding volume up and down and power all at the same time ?
Abhaypraseeth said:
i mean to say this see the attachment you see the second option that is the one to click and then it will ask to connect to wifi and then it will start downloading (aprox 10mins) and then install the latest firmware and recovery (be warned this will wipe your device and upgrade to latest version and you will lose root and twrp:good
Click to expand...
Click to collapse
Yea... I have done this too and I was able to connect to wifi but when it is about to start downloading it will say failed to get package info instead of downloading it.
Someone said probably the os has crashed and non of this will work...
clsA said:
he said he already tried that
@Lasisi list your phone model and the file your trying to use (a link)
Also list what software version you were on and what the update is listed as
are you putting the file update.app in a folder called dload on the ext_sdcard and rebooting to erecovery by shutting off the phone and then holding volume up and down and power all at the same time ?
Click to expand...
Click to collapse
Yes i am putting it in dload and rebooting by holding the volume buttons(both)...
My phone model is Honor 5x
The file i was trying to use comes from http://consumer.huawei.com/pk/support/mobile-phones/honor5x-pk-sup.htm
Did i get your question right??
I was told the os of the phone is crashed and all these wont work.. Is there still something else that can be done
Lasisi said:
Yes i am putting it in dload and rebooting by holding the volume buttons(both)...
My phone model is Honor 5x
The file i was trying to use comes from http://consumer.huawei.com/pk/support/mobile-phones/honor5x-pk-sup.htm
Did i get your question right??
Click to expand...
Click to collapse
Dear Lasisi WHICH model of honor 5x do you have (eg KIW-TL00,KIW-TL00H)
---------- Post added at 04:40 PM ---------- Previous post was at 04:40 PM ----------
Lasisi said:
Yes i am putting it in dload and rebooting by holding the volume buttons(both)...
My phone model is Honor 5x
The file i was trying to use comes from http://consumer.huawei.com/pk/support/mobile-phones/honor5x-pk-sup.htm
Did i get your question right??
Click to expand...
Click to collapse
Please tell and I'll fetch the files for you if I can..
Lasisi said:
Yes i am putting it in dload and rebooting by holding the volume buttons(both)...
My phone model is Honor 5x
The file i was trying to use comes from http://consumer.huawei.com/pk/support/mobile-phones/honor5x-pk-sup.htm
Did i get your question right??
Click to expand...
Click to collapse
This site links to the KIW-L21 is that your phone ?
the file you download from their is a zip file ..are you unzipping it before putting update.app in the dload folder ?
Lasisi said:
I was told the os of the phone is crashed and all these wont work.. Is there still something else that can be done
Click to expand...
Click to collapse
is your phone C185 B130, Kuwait, Channel-Others
or C185 B310 CUST C185 D006
Abhaypraseeth said:
Dear Lasisi WHICH model of honor 5x do you have (eg KIW-TL00,KIW-TL00H)
---------- Post added at 04:40 PM ---------- Previous post was at 04:40 PM ----------
Please tell and I'll fetch the files for you if I can..
Click to expand...
Click to collapse
Okay... It is KIW-L21 model
clsA said:
This site links to the KIW-L21 is that your phone ?
the file you download from their is a zip file ..are you unzipping it before putting update.app in the dload folder ?
is your phone C185 B130, Kuwait, Channel-Others
or C185 B310 CUST C185 D006
Click to expand...
Click to collapse
Yes my phone is KIW-L21... I unzipped it before putting in dload... The phone was bought from china thats all i know i *dont know anything* about this C185 B1330
Lasisi said:
Okay... It is KIW-L21 model
Click to expand...
Click to collapse
Ok I'll get you the link just wait for 30 minutes
Lasisi said:
Okay... It is KIW-L21 model
Click to expand...
Click to collapse
Download this- https://www.androidfilehost.com/?fid=24411628330025755
Get 15 second ADB installer https://forum.xda-developers.com/showthread.php?t=2588979
Extract it
COPY THE
BOOT.IMG
BOOT.IMG.HEADER
SYSTEM.IMG
SYSTEM.IMG.HEADER
RECOVERY.IMG
RECOVERY.IMG.HEADER
CUST.IMG
CUST.IMG.HEADER
To the adb folder in your C: drive
Then open CMD and type in
Code:
cd C:\adb
Then
Turn off your phone.
Connect it to your PC via the USB cable.
Hold down Volume Down and Power to boot into Fastboot mode.
Check if your device is connected via the fastboot devices command.
If it is, then flash the BOOT.IMG file entering
Code:
fastboot flash boot BOOT.IMG
Next, flash the RECOVERY.IMG by typing:
Code:
fastboot flash recovery RECOVERY.IMG
After that, flash the SYSTEM.IMG with the
Code:
fastboot flash system SYSTEM.IMG
command. *
Lastly, flash the CUST.IMG by typing
Code:
fastboot flash cust CUST.IMG
If all the flashing is done, restart your phone with the
Code:
fastboot restart command
* – Since the SYSTEM and CUST file are much more larger than the other two, the program will flash them in parts. It may seem like the program is frozen, but it’s chopping up the large files into smaller ones in order to flash them. You can check the Process Manager, and see the HDD usage of this process.
Abhaypraseeth said:
Download this- https://www.androidfilehost.com/?fid=24411628330025755
Get 15 second ADB installer https://forum.xda-developers.com/showthread.php?t=2588979
Extract it
COPY THE
BOOT.IMG
BOOT.IMG.HEADER
SYSTEM.IMG
SYSTEM.IMG.HEADER
RECOVERY.IMG
RECOVERY.IMG.HEADER
CUST.IMG
CUST.IMG.HEADER
To the adb folder in your C: drive
Then open CMD and type in
Code:
cd C:\adb
Then
Turn off your phone.
Connect it to your PC via the USB cable.
Hold down Volume Down and Power to boot into Fastboot mode.
Check if your device is connected via the fastboot devices command.
If it is, then flash the BOOT.IMG file entering
Code:
fastboot flash boot BOOT.IMG
Next, flash the RECOVERY.IMG by typing:
Code:
fastboot flash recovery RECOVERY.IMG
After that, flash the SYSTEM.IMG with the
Code:
fastboot flash system SYSTEM.IMG
command. *
Lastly, flash the CUST.IMG by typing
Code:
fastboot flash cust CUST.IMG
If all the flashing is done, restart your phone with the
Code:
fastboot restart command
* – Since the SYSTEM and CUST file are much more larger than the other two, the program will flash them in parts. It may seem like the program is frozen, but it’s chopping up the large files into smaller ones in order to flash them. You can check the Process Manager, and see the HDD usage of this process.
Click to expand...
Click to collapse
I know your just trying to help, but those files are Very Old .. most likely his phone is already on android 6
you also don't know if he has C185 or C432
I think a "fastboot getvar all" from the bootloader should tell if he's on C185 or C432
then you need to download one of the 2 files above and use Huawei update extractor to pull the files from the Full update package for Android 6
and use those to try and recover the phone.
clsA said:
Download this- https://www.androidfilehost.com/?fid=24411628330025755
Get 15 second ADB installer https://forum.xda-developers.com/showthread.php?t=2588979
Extract it
COPY THE
BOOT.IMG
BOOT.IMG.HEADER
SYSTEM.IMG
SYSTEM.IMG.HEADER
RECOVERY.IMG
RECOVERY.IMG.HEADER
CUST.IMG
CUST.IMG.HEADER
To the adb folder in your C: drive
Then open CMD and type in
Then
Turn off your phone.
Connect it to your PC via the USB cable.
Hold down Volume Down and Power to boot into Fastboot mode.
Check if your device is connected via the fastboot devices command.
If it is, then flash the BOOT.IMG file entering
Next, flash the RECOVERY.IMG by typing:
After that, flash the SYSTEM.IMG with the
command. *
Lastly, flash the CUST.IMG by typing
If all the flashing is done, restart your phone with the
I know your just trying to help, but those files are Very Old .. most likely his phone is already on android 6
you also don't know if he has C185 or C432
I think a "fastboot getvar all" from the bootloader should tell if he's on C185 or C432
then you need to download one of the 2 files above and use Huawei update extractor to pull the files from the Full update package for Android 6
and use those to try and recover the phone.
Click to expand...
Click to collapse
True
Some real help going on guys.. great to see the detailed instructions for new user.
@Abhaypraseeth and @clsA
shashank1320 said:
Some real help going on guys.. great to see the detailed instructions for new user.
@Abhaypraseeth and @clsA
Click to expand...
Click to collapse
Thanks
Related
Hi,
I have bricked my Honor 5x after flashing custom recovery. This these the steps I followed:
1) Unlocked the bootloader
2) Flashed TWRP recovery
3) Flashed root
4) Tried to update OTA
Now the phone is stuck at boot screen. I can enter recovery by pressing volume down and power, but now is stock recovery. And I don't know what to do.
Can someone help me?
OK u can't OTA update with twrp AND U SHOULD try adb flashing twrp through fastboot and maybe restoring a nandroid if u have one if not there's some u can download around here
Hey, my phone is bricked too. How did you manage to flash adb during twrp. How did you restore the backup and where did you get it from?
Or could someone please explain to me how I can get back to stock. I saw one thread with the .app file, but there you had to go the setting or something, which I can't do.
I have twrp installed and I have the L21 version.
Ok, I figured it out. I took the backup and the instructions from this thread: http://forum.xda-developers.com/honor-5x/development/unrooted-stock-rom-t3308902
heinzwilli6 said:
Hey, my phone is bricked too. How did you manage to flash adb during twrp. How did you restore the backup and where did you get it from?
Or could someone please explain to me how I can get back to stock. I saw one thread with the .app file, but there you had to go the setting or something, which I can't do.
I have twrp installed and I have the L21 version.
Click to expand...
Click to collapse
I was able to get my phone back to stock using the update.app file and the Huawei Update Extractor
Download stock firmware and extract the update.app file
http://forum.xda-developers.com/honor-5x/development/repository-honor-5x-file-depot-t3328288
Download Huawei Update Extractor
http://d-h.st/wwfQ
Use the Huawei Update Extractor to open the update.app file and extract system.img, Cust.img, boot.img, recovery.img
Copy the extracted files to your adb folder
Connect the phone to the PC in fastboot mode, to do this power off the phone hold Volume down and insert a usb cable connected to the PC
Type these commands on ADB:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot reboot
After that you should be back on stock firmware
I tried to do that too. But the problem was that my adb didn't recognize my phone. Of course I had everything installed.
When I unlocked the bootloader earlier, it worked. But there I had to enable USB debugging. When my phone was broke, I couldn't enable it. Maybe that's why?
However, my phone is working right now, so thanks anyway.
fixed
jperez1132 said:
I was able to get my phone back to stock using the update.app file and the Huawei Update Extractor
Download stock firmware and extract the update.app file
http://forum.xda-developers.com/honor-5x/development/repository-honor-5x-file-depot-t3328288
Download Huawei Update Extractor
http://d-h.st/wwfQ
Use the Huawei Update Extractor to open the update.app file and extract system.img, Cust.img, boot.img, recovery.img
Copy the extracted files to your adb folder
Connect the phone to the PC in fastboot mode, to do this power off the phone hold Volume down and insert a usb cable connected to the PC
Type these commands on ADB:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot reboot
After that you should be back on stock firmware
Click to expand...
Click to collapse
I have a practically dead honor 5x, flashed a L-24 firmware on L-22. TWRP doesnt let me do anything, no touch functions work so i cannot restore my back up.
Fastboot commands on format /data and flash cust cust.img fail with the error "Remote: Command not allowed", bootloader is unlocked, pls help.....I need to flash back the default cust.img to get it back to normal
SOLVED: Downloaded the official firmware, placed the "dload" folder which contains the update.app in the root of the sd card, went into download mode on phone (vol up + vol dow + power) and the system installed the firmware automatically.....booted back into the stock system now, next will reflash TWRP and restore back up
nandakalyan said:
I have a practically dead honor 5x, flashed a L-24 firmware on L-22. TWRP doesnt let me do anything, no touch functions work so i cannot restore my back up.
Fastboot commands on format /data and flash cust cust.img fail with the error "Remote: Command not allowed", bootloader is unlocked, pls help.....I need to flash back the default cust.img to get it back to normal
SOLVED: Downloaded the official firmware, placed the "dload" folder which contains the update.app in the root of the sd card, went into download mode on phone (vol up + vol dow + power) and the system installed the firmware automatically.....booted back into the stock system now, next will reflash TWRP and restore back up
Click to expand...
Click to collapse
WORKED: update.app in dload folder WORKED !!! Thanks a lot
narengowda said:
WORKED: update.app in dload folder WORKED !!! Thanks a lot
Click to expand...
Click to collapse
Glad it worked! did you figure out what caused the issue?
jperez1132 said:
I was able to get my phone back to stock using the update.app file and the Huawei Update Extractor
Download stock firmware and extract the update.app file
http://forum.xda-developers.com/honor-5x/development/repository-honor-5x-file-depot-t3328288
Download Huawei Update Extractor
http://d-h.st/wwfQ
Use the Huawei Update Extractor to open the update.app file and extract system.img, Cust.img, boot.img, recovery.img
Copy the extracted files to your adb folder
Connect the phone to the PC in fastboot mode, to do this power off the phone hold Volume down and insert a usb cable connected to the PC
Type these commands on ADB:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot reboot
After that you should be back on stock firmware
Click to expand...
Click to collapse
Is your fingerprint ID working good?
---------- Post added at 09:14 AM ---------- Previous post was at 08:46 AM ----------
fastboot flash cust CUST.img
target max-download-size: 254MB
sending 'cust' (196335 KB)...
OKAY [ 6.493s]
writing 'cust'...
FAILED (remote: Command not allowed)
finished. total time: 6.493s
Cant flash cust. How did you do that?
sad1996 said:
Is your fingerprint ID working good?
---------- Post added at 09:14 AM ---------- Previous post was at 08:46 AM ----------
fastboot flash cust CUST.img
target max-download-size: 254MB
sending 'cust' (196335 KB)...
OKAY [ 6.493s]
writing 'cust'...
FAILED (remote: Command not allowed)
finished. total time: 6.493s
Cant flash cust. How did you do that?
Click to expand...
Click to collapse
Yes, it is working perfectly.
Hi, sorry for hijacking a thread but I thought it'd be better than making a new one.
I did pretty much the same as the OP, unlocked the bootloader, flashed TWRP recovery, rooted and then stupidly tried to do an official update on the phone (I believe it was kiw-l21c432b140)
The phone is just now stuck at the boot screen, I can get into fastboot mode but cannot use ADB, says device isn't found no matter what I try. I also tried putting stock firmware on the SD card and going into download mode (EMUI) but it just says software install failed.. Any help appreciated, only got the phone today and have spent longer trying to fix it than I have using it..
Thanks!
tomblast66 said:
Hi, sorry for hijacking a thread but I thought it'd be better than making a new one.
I did pretty much the same as the OP, unlocked the bootloader, flashed TWRP recovery, rooted and then stupidly tried to do an official update on the phone (I believe it was kiw-l21c432b140)
The phone is just now stuck at the boot screen, I can get into fastboot mode but cannot use ADB, says device isn't found no matter what I try. I also tried putting stock firmware on the SD card and going into download mode (EMUI) but it just says software install failed.. Any help appreciated, only got the phone today and have spent longer trying to fix it than I have using it..
Thanks!
Click to expand...
Click to collapse
As long as you are able to boot into fastboot you still have hope
Are you able to get into TWRP? (Power + Vol up) If yes, download the L-21 stock rom in the file repository thread and flash it. In all likelihood, that will solve any corruption of system files. If not, read on.
Did you check if you have installed the ADB drivers? I am assuming it should have been installed considering you flashed TWRP, but better to check and reinstall. Device not found is usually a driver error. Alternatively, you can install HiSync, it refreshes and replaces the drivers needed for Honor 5X. Further to installing that, try adb fastboot commands and flash the stock recovery using the steps in this post:
http://forum.xda-developers.com/showpost.php?p=65659088&postcount=5
nandakalyan said:
As long as you are able to boot into fastboot you still have hope
Are you able to get into TWRP? (Power + Vol up) If yes, download the L-21 stock rom in the file repository thread and flash it. In all likelihood, that will solve any corruption of system files. If not, read on.
Did you check if you have installed the ADB drivers? I am assuming it should have been installed considering you flashed TWRP, but better to check and reinstall. Device not found is usually a driver error. Alternatively, you can install HiSync, it refreshes and replaces the drivers needed for Honor 5X. Further to installing that, try adb fastboot commands and flash the stock recovery using the steps in this post:
http://forum.xda-developers.com/showpost.php?p=65659088&postcount=5
Click to expand...
Click to collapse
When I do power and vol up I get EMUI recovery, not TWRP I put the stock rom on the SD card and tried to install it and it just says "Software install failed" and the only option is to shut the phone down again.
I had all the ADB drivers installed, will reinstall it all and see if it helps. When I run adb now and use the "adb devices" command it just says "List of devices attached" and doesn't show anything..
tomblast66 said:
When I do power and vol up I get EMUI recovery, not TWRP I put the stock rom on the SD card and tried to install it and it just says "Software install failed" and the only option is to shut the phone down again.
I had all the ADB drivers installed, will reinstall it all and see if it helps. When I run adb now and use the "adb devices" command it just says "List of devices attached" and doesn't show anything..
Click to expand...
Click to collapse
Oh then you have stock recovery, are you using the update.app provided by Huawei? Or using any ROMs/images posted here? It is possible that you may have a corrupted download, look up the Huawei site for downloads in the support section for your region and download the official update.app, try with that
nandakalyan said:
Oh then you have stock recovery, are you using the update.app provided by Huawei? Or using any ROMs/images posted here? It is possible that you may have a corrupted download, look up the Huawei site for downloads in the support section for your region and download the official update.app, try with that
Click to expand...
Click to collapse
It wasn't stock recovery before, after the phone updated it went back to stock and wouldn't boot. I downloaded the firmware from http://forum.xda-developers.com/honor-5x/development/stock-kiw-l24-l21-t3312684 and that's what I try to install through recovery and it says there's an error, a load of other texts flashes up before it says error but it's too quick to read. When I have better internet I'll re-download it in case it was corrupt. Thanks for your help, hopefully I can get it fixed as I only just got this to replace my old phone. Would be a shame to spend the money on it and have no use from the device.. Just wish the computer would detect through adb as I can get into fastboot easily enough.
tomblast66 said:
It wasn't stock recovery before, after the phone updated it went back to stock and wouldn't boot. I downloaded the firmware from http://forum.xda-developers.com/honor-5x/development/stock-kiw-l24-l21-t3312684 and that's what I try to install through recovery and it says there's an error, a load of other texts flashes up before it says error but it's too quick to read. When I have better internet I'll re-download it in case it was corrupt. Thanks for your help, hopefully I can get it fixed as I only just got this to replace my old phone. Would be a shame to spend the money on it and have no use from the device.. Just wish the computer would detect through adb as I can get into fastboot easily enough.
Click to expand...
Click to collapse
Sure, we all help each other
BTW, just to be sure, you using the single "Update.app" file, that runs into a couple of gigs or the extracted one? You can't flash extracted Update.app through stock recovery.
HiSync (the official Huawei tool) also provides an option to recover the phone, tried that?
nandakalyan said:
Sure, we all help each other
BTW, just to be sure, you using the single "Update.app" file, that runs into a couple of gigs or the extracted one? You can't flash extracted Update.app through stock recovery.
HiSync (the official Huawei tool) also provides an option to recover the phone, tried that?
Click to expand...
Click to collapse
It's the single one, about 2.66GB I believe, I tried the recovering through the Huawei tool and it says "Your device is not supported for system recovery".
tomblast66 said:
It's the single one, about 2.66GB I believe, I tried the recovering through the Huawei tool and it says "Your device is not supported for system recovery".
Click to expand...
Click to collapse
Oops! I am no techie, so am at the end of my wits, but thing I do suspect is a corrupted download, so if you can try downloading the file again from a stable connection and try is all I can think of. I've had this corrupted file thing quite a few times, so suggesting.
I screwed up my phone lol, when I was updating it to oreo, I didn't know that the update.zip file was corrupted.
Now I'm stuck on
Error!
Func NO : 9 (hifi image)
Error NO : 1 (security image failed)
My version was...
STF-L09C185B170
What i tried to install that failed is...
STF-L09C185B361 (8.0.0.361)
I can still go to fastboot with everything unlocked, I can also flash a twrp recovery, but only by typing flash recovery_ramdisk(instead "recovery"), and when I try to do the update method by pressing vol up, vol down, and power, it doesnt take me to the update section, it just show me a crashed screen, then goes back to error message.
I also tried volup and power, I can't seem to go to twrp(I think booting to twrp and flashing zip files can be one of the only ways to fix this). Is there a way to go to twrp recovery using fastboot?
I've also tried flashing extracted files from update.app manually, it doesn't work. Some files can be flashed, while some can't.
Please I'm begging u guys, pls halp :crying:
also I guess the lesson here is: double check if your file is corrupted before installing/flashing
First, what is the way you took triying to update ?
(When done from system UI, official or FF, there is an integrity check of downloaded files.)
It seems you got oreo partition scheme during your failed update.
First see this guide:
https://forum.xda-developers.com/mate-8/general/fastboot-erecovery-recovery-upgrade-mode-t3543441
Try to restore using erecovery. (download and update firmware via wifi)
If not working you could use HWOTA8.
For launching recovery (stock or twrp) from bootloader type "fastboot reboot recovery".
oslo83 said:
First, what is the way you took triying to update ?
(When done from system UI, official or FF, there is an integrity check of downloaded files.)
It seems you got oreo partition scheme during your failed update.
First see this guide:
https://forum.xda-developers.com/mate-8/general/fastboot-erecovery-recovery-upgrade-mode-t3543441
Try to restore using erecovery. (download and update firmware via wifi)
If not working you could use HWOTA8.
For launching recovery (stock or twrp) from bootloader type "fastboot reboot recovery".
Click to expand...
Click to collapse
I downloaded the oreo file using a browser and installed it with HWOTA, everything got inserted into my device, but the update failed and it gave me the error when I reboot. Also I can't get to erecovery or upgrade mode(that's the crashed screen), and "fastboot reboot recovery" doesn't work, it just show me a list of commands(which I assume happens if the command is invalid).
Ok I'll try HWOTA8, but I need to configure it so it recognizes my device, only my adb recognizes it.
Do 'fastboot devices work'?
Try english hwota8.
oslo83 said:
Do 'fastboot devices work'?
Try english hwota8.
Click to expand...
Click to collapse
Nah, I figured it out, I backed up my adb folder and just merged hwota8 with it. Yes, it does work.
Btw how do I fully turn off the device? it just keeps bootlooping if i hold down the volup and power key, maybe this is the reason why I can't get into twrp recovery.
My only hope is that I can flash something on fastboot that will let me go to update mode(or erecovery) or twrp.
Like.. anything, even boot.img fails when I try to flash it. It must be stuck on oreo partition.
Also I did considered dc phoenix, but I don't have the money to pay for an account. Man, why is unbricking not free on huawei devices? That guy prolly made a fortune by now(for holding everyone with unbrick leverage lel), and it's a huge mistake for me to fiddle with a huawei device, it has so many problems with twrp and root.
If anyone can find a way to do unbrick it, like anything, that would be great.
So you didn't manage to use honor9's hwota8 ?
oslo83 said:
So you didn't manage to use honor9's hwota8 ?
Click to expand...
Click to collapse
I used it but it didn't worked, I need to be either booted in the phone's os or inside twrp recovery bec. all of the commands executed by hwota8 are adb shell, not fastboot. Like I said, I only have access to fastboot, but I'll try again tomorrow. This is taking a lot of my time and I'm having panic attacks that I may not be able to fix this lol. Oh yeah, thanks for helping out.
Note: Since Oreo, partitions names have changed ; "recovery" changed to "recovery_ramdisk" now.
Use this command to flash recovery: fastboot flash recovery_ramdisk YourStockOrTwrpRecovery.img
Use oreo stock recovery or oreo twrp.
But I thought with hwotas available for honor 9 you started from bootloader...
oslo83 said:
Note: Since Oreo, partitions names have changed ; "recovery" changed to "recovery_ramdisk" now.
Use this command to flash recovery: fastboot flash recovery_ramdisk YourStockOrTwrpRecovery.img
Use oreo stock recovery or oreo twrp.
But I thought with hwotas available for honor 9 you started from bootloader...
Click to expand...
Click to collapse
I already did that, read the OP. Like I said, I can't boot into any recovery, not twrp not stock, not even upgrade mode, nothing.
As for hwota8, nope, it doesnt start from the bootloader, it's already trying to use the adb shell commands.
Anyway I'm taking all chances, I'm trying to research oreo's partitions names, and I'm also trying to find out how to bypass this message "FAILED (remote: Command not allowed)" bec. it might be the only way I can salvage this phone.
edit: ok im trying hwota8 again, maybe i missed something, and yes it has fastboot, sorry i was rushing but im trying again now, i'll post my progress later
Hi,
Here is a long story of bricking my device, I wanted to downgrade my device from Oreo to Nougat, and somehow I installed wrong software, mine is RNE-L21 and after successful downgrade with this method:
https://www.youtube.com/watch?v=_3vqb8hPZIQ
version of software I installed: RNE-L21C461B153CUSTC461D001
my device was NEO-something, in settings it showed 3GB of RAM instead of 4GB, screen resolutution 1280x720 instead of fullHD and 32GB of internal memory instead of 64, so I wanted to change that.
This time I downloaded (not so sure about this now) proper version of firmware: RNE-L21C432B135CUSTC432D001, and used another method because previous method didnt work, link:
https://forum.xda-developers.com/showpost.php?p=76503686&postcount=46
the HuRUpdater scrpit worked fine, I booted up the device and nothing was changed, so I was like, well, ok then.
but then I noticed that my bootloader was locked, so I wanted to unlock it, and after typing the *fastboot oem unlock code* and selecting yes on my device, It rebooted and just stuck at the "Powered by andriod" logo.
I was trying to enter TWRP but id doesnt work, its stuck at the loading screen, I was unable to enter fastboot, but now I figured out that when I discharge it, I'm able to enter fastboot.
So now I'm stuck, I don't know what should I do.
I saw a guide for flashing .img files from UPDATE.APP, but that guide was for Oreo, and I've got diffrent .img files inside my Nougat UPDATE.APP so I don't want to risk:
https://forum.xda-developers.com/mate-10/help/mate-10-lite-bricked-t3794236
sentavn said:
you should format by using fastboot. First download your stock ROM and extract with Huawei Firmware Extracter. Select UPDATE.APP and extract following files:
erecovery_kernel.img
erecovery_ramdisk.img
erecovery_vbmeta.img
cust.img
erecovery_vendor.img
kernel.img
ramdisk.img
recovery_vbmeta.img
recovery_vendor.img
system.img
Reboot your device in to fastboot mode (recovery mode) and flash those files one by one:
fastboot flash erecovery_kernel erecovery_kernel.img
...
fastboot flash system system.img
//
Erase your userdata space:
fastboot -w
//reboot
fastboot reboot
Now go to your stock recovery and do factory reset, wide cache.
Now your device back to stock OREO
Click to expand...
Click to collapse
Any Ideas?
HOW I FIXED:
I downloaded this EMUI 5 Nougat, Thanks to bozka1:
https://androidhost.ru/5SZ
I extracted UPDATE.APP file using Huawei Update Extractor.
I was trying to flash everything via fastboot: BOOT.img, RECOVERY.img, RECOVERY2.img, CUST.img, SYSTEM.img but nothing helped me.
I found out what you can flash via fastboot here:
https://forum.xda-developers.com/general/general/huawei-fastboot-commands-t3850123
There was no hope for me, so I tried to flash USERDATA.img
fastboot flash userdata USERDATA.img
Click to expand...
Click to collapse
And then cmd promped something unusual:
target reported max download size of 471859200 bytes
sending 'userdata' (24576 KB)...
OKAY [ 0.646s]
writing 'userdata'...
(bootloader) success to erase cryypt info in oeminfo
OKAY [ 1.401s]
finished. total time: 2.049s
Click to expand...
Click to collapse
Then I proceeded to flash: BOOT.img, RECOVERY.img, RECOVERY2.img and CACHE.img
I didn't flash SYSTEM.img because I flashed it before like 1500 times.
My phone didn't work yet so I used the DLOAD method because RECOVERY finally worked, so I shut down the device and used three buttons combo:
First holding Volume Up, Volume Down and then pressing Power Button.
There is a documentation in the firmware I downloaded, SDcard must be in exFAT format.
Thank You bozka1.
voltzero2 said:
Hi,
Here is a long story of bricking my device, I wanted to downgrade my device from Oreo to Nougat, and somehow I installed wrong software, mine is RNE-L21 and after successful downgrade with this method:
https://www.youtube.com/watch?v=_3vqb8hPZIQ
version of software I installed: RNE-L21C461B153CUSTC461D001
my device was NEO-something, in settings it showed 3GB of RAM instead of 4GB, screen resolutution 1280x720 instead of fullHD and 32GB of internal memory instead of 64, so I wanted to change that.
This time I downloaded (not so sure about this now) proper version of firmware: RNE-L21C432B135CUSTC432D001, and used another method because previous method didnt work, link:
https://forum.xda-developers.com/showpost.php?p=76503686&postcount=46
the HuRUpdater scrpit worked fine, I booted up the device and nothing was changed, so I was like, well, ok then.
but then I noticed that my bootloader was locked, so I wanted to unlock it, and after typing the *fastboot oem unlock code* and selecting yes on my device, It rebooted and just stuck at the "Powered by andriod" logo.
I was trying to enter TWRP but id doesnt work, its stuck at the loading screen, I was unable to enter fastboot, but now I figured out that when I discharge it, I'm able to enter fastboot.
So now I'm stuck, I don't know what should I do.
I saw a guide for flashing .img files from UPDATE.APP, but that guide was for Oreo, and I've got diffrent .img files inside my Nougat UPDATE.APP so I don't want to risk:
https://forum.xda-developers.com/mate-10/help/mate-10-lite-bricked-t3794236
Any Ideas?
Click to expand...
Click to collapse
What is your original location, C461?
Which oeminfo you have flashed?
bozka1 said:
What is your original location, C461?
Which oeminfo you have flashed?
Click to expand...
Click to collapse
My original location is C432, I don't remember flashing any oeminfo
voltzero2 said:
My original location is C432, I don't remember flashing any oeminfo
Click to expand...
Click to collapse
Single SIM/dual SIM ?
Try reboot your phone into fastboot mode and use command
fastboot oem get-build-number
you'll see the number of your current firmware
bozka1 said:
Single SIM/dual SIM ?
Try reboot your phone into fastboot mode and use command
fastboot oem get-build-number
you'll see the number of your current firmware
Click to expand...
Click to collapse
It's dual sim,
the number of current firmware: System 5.1.0.98(08K5)
voltzero2 said:
It's dual sim,
the number of current firmware: System 5.1.0.98(08K5)
Click to expand...
Click to collapse
Okay, phone still locked ? What shows the screen in fastboot mode - phone and FRP ?
bozka1 said:
Okay, phone still locked ? What shows the screen in fastboot mode - phone and FRP ?
Click to expand...
Click to collapse
It says its unlucked:
https://imgur.com/a/LEDKWFr
I hope this link works
Download oeminfo
https://mega.nz/#!w4cX1QwT!TuFmfultDMDPt2b5yekrWREls7o5tSpveQFiWkBX6zg
Copy it to SD card.
Download TWRP
https://mega.nz/#!IodXAKBB!_VrqsMSxVw_NkXwfUIQb32mG_QAMd4HQ8_BtqmeHI94
and Service ROM
https://androidhost.ru/5SZ
. Extract dload folder from Service ROM and copy it to SD card.
Try to install TWRP: Copy the downloaded TWRP file to the Minimal ADB and fastboot folder, reboot to fastboot mode . Launch Minimal ADB , In the command window, enter the following commands one by one
- fastboot devices - this command will verify connection in fastbot mode (you will see your serial number)
-fastboot flash recovery2 TWRP-MATE.img
-fastboot reboot - the device will reboot
Now you can boot into TWRP mode using button Volume Up after rebooting.
Reboot to TWRP, Select Install, navigate to oeminfoRNE-L21C432 and confirm. Go back to the TWRP main menu, select Reboot and Power Off.
Now you can try flash the Service ROM with three buttons combo. GL!
bozka1 said:
Download oeminfo
https://mega.nz/#!w4cX1QwT!TuFmfultDMDPt2b5yekrWREls7o5tSpveQFiWkBX6zg
Copy it to SD card.
Download TWRP
https://mega.nz/#!IodXAKBB!_VrqsMSxVw_NkXwfUIQb32mG_QAMd4HQ8_BtqmeHI94
and Service ROM
https://androidhost.ru/5SZ
. Extract dload folder from Service ROM and copy it to SD card.
Try to install TWRP: Copy the downloaded TWRP file to the Minimal ADB and fastboot folder, reboot to fastboot mode . Launch Minimal ADB , In the command window, enter the following commands one by one
- fastboot devices - this command will verify connection in fastbot mode (you will see your serial number)
-fastboot flash recovery2 TWRP-MATE.img
-fastboot reboot - the device will reboot
Now you can boot into TWRP mode using button Volume Up after rebooting.
Reboot to TWRP, Select Install, navigate to oeminfoRNE-L21C432 and confirm. Go back to the TWRP main menu, select Reboot and Power Off.
Now you can try flash the Service ROM with three buttons combo. GL!
Click to expand...
Click to collapse
So I'll have to wait a little before I'll download Service ROM, my internet connection isn't the greatest, but I flashed Your TWRP and unfortunately it doesn't work;
If I hold the Power button and Volume Up - the same story as before, I see the loading TWRP screen and nothing happends,
If I let the device to boot up and then press only the Volume Up button - it says "Your device is booting up" and nothing happens.
By the way, what can happen when I'll use "fastboot flash recovery something.img" instead of recovery2?
EDIT:
I did some testing and Your TWRP doesn't boot at all on my device, I flashed another one, Catuva21 3.1.1 Nougat, and that is the one that I had before - it is booting but never loads.
voltzero2 said:
By the way, what can happen when I'll use "fastboot flash recovery something.img" instead of recovery2?
Click to expand...
Click to collapse
TWRP will automatically overwrite Stock recovery, it's impossible to flash something from dload without Stock recovery .
Using command "recovery2" you will install TWRP over eRecovery .
Try flash Service ROM from SD card without TWRP & oeminfo flashing, but Im not sure... your system is heavily damaged and incomplete .
bozka1 said:
TWRP will automatically overwrite Stock recovery, it's impossible to flash something from dload without Stock recovery .
Using command "recovery2" you will install TWRP over eRecovery .
Try flash Service ROM from SD card without TWRP & oeminfo flashing, but Im not sure... your system is heavily damaged and incomplete .
Click to expand...
Click to collapse
So the phone would boot up the TWRP without pressing anything? Damn, I might have done that typo error... Do You know if I can restore the stock recovery from the UPDATE.APP file? I mean flash it
voltzero2 said:
So the phone would boot up the TWRP without pressing anything? Damn, I might have done that typo error... Do You know if I can restore the stock recovery from the UPDATE.APP file? I mean flash it
Click to expand...
Click to collapse
Use Huawei Update Extractor and extract RECOVERY.img , copy it to the "Minimal ADB and fastboot" folder . Command :
fastboot flash recovery RECOVERY.img
bozka1 said:
Use Huawei Update Extractor and extract RECOVERY.img , copy it to the "Minimal ADB and fastboot" folder . Command :
fastboot flash recovery RECOVERY.img
Click to expand...
Click to collapse
Yeah, I've done it already, unfortunately nothing changed. How about BOOT.img? Can this influence something?
EDIT:
I also wonder about just following the steps in my first post, I've got UPDATE.APP for Oreo, but I don't know if it will only make it worse.
bozka1 said:
Download oeminfo
https://mega.nz/#!w4cX1QwT!TuFmfultDMDPt2b5yekrWREls7o5tSpveQFiWkBX6zg
Copy it to SD card.
Download TWRP
https://mega.nz/#!IodXAKBB!_VrqsMSxVw_NkXwfUIQb32mG_QAMd4HQ8_BtqmeHI94
and Service ROM
https://androidhost.ru/5SZ
. Extract dload folder from Service ROM and copy it to SD card.
Try to install TWRP: Copy the downloaded TWRP file to the Minimal ADB and fastboot folder, reboot to fastboot mode . Launch Minimal ADB , In the command window, enter the following commands one by one
- fastboot devices - this command will verify connection in fastbot mode (you will see your serial number)
-fastboot flash recovery2 TWRP-MATE.img
-fastboot reboot - the device will reboot
Now you can boot into TWRP mode using button Volume Up after rebooting.
Reboot to TWRP, Select Install, navigate to oeminfoRNE-L21C432 and confirm. Go back to the TWRP main menu, select Reboot and Power Off.
Now you can try flash the Service ROM with three buttons combo. GL!
Click to expand...
Click to collapse
Do I have to install oeminfo to be able to use the "three buttons combo"? Because I tried it today and it doesn't work, phone is just stuck at "Your device is booting.." screen, guess I'm out of luck
I fixed it, solution will be attached to first post.
Thanks to bozka1 who gave me this helpful link:
https://androidhost.ru/5SZ
voltzero2 said:
I fixed it, solution will be attached to first post.
Thanks to bozka1 who gave me this helpful link:
https://androidhost.ru/5SZ
Click to expand...
Click to collapse
You're welcome
Hi help me
Bozka1
My huawei mate 10 lite is brick stock on erecovery what can i do now
Lj08 said:
My huawei mate 10 lite is brick stock on erecovery what can i do now
Click to expand...
Click to collapse
Hi, have you tried to do something with your phone? Can you provide some info?
voltzero2 said:
Hi, have you tried to do something with your phone? Can you provide some info?
Click to expand...
Click to collapse
Voltzero2
I try factory reset wipe catch and no result just going back to erecovery
Lj08 said:
Voltzero2
I try factory reset wipe catch and no result just going back to erecovery
Click to expand...
Click to collapse
Alright, so did it just happened randomly or did you tried to do something with your phone? Did you unlocked bootloader or flashed custom recovery etc? You need to explain what happened, that's quite important if you want someone to help you.
I installed EMUI 9 on my p20 lite and didn't like it, so I tried one of the openkirin 9.0 beta roms. There was some features that didn't work so I decided I wanted to go back. I followed the guide on openkirin's website about going back to stock by flashing system.img, ramdisk.img, kernel.img and recovery_ramdisk.img however trying to flash ramdisk.img gives "partition length get error". Now, the phone only is able to boot into fastboot and eRecovery mode. In eRecovery the options to backup and to factory reset are grayed out however, and the "update to latest version" doesn't work. When I plug the charger in from being turned off it shows the white error screen with error 10 (boot image) and error 2 (load failed). I have a suspicion that flashing kernel.img is what causing the problem, but I don't really know enough to be sure and I don't want to do anything to make it worse since it seems like this should be fixable.
This is the only phone I have which properly worked so any help is greatly appreciated.
Hi there
Don't worry, it's fixable
There's way bigger mess than that, so the best solution for you and the easiest one is to flash a signed dload package, which you can find for your model and build number in this website:
https://androidhost.ru/search.html
Search in this format "ANE-LX1C66".
Then extract it and copy the "dload" folder to the root of your sd card.
Then power off your device if it isn't and then press POWER + Volume Plus + Volume Minus at the same time until a circle with EMUI appears.
That will erase all data and lock your bootloader.
Cheers!
AS
ars_chelsea said:
Hi there
Don't worry, it's fixable
There's way bigger mess than that, so the best solution for you and the easiest one is to flash a signed dload package, which you can find for your model and build number in this website:
https://androidhost.ru/search.html
Search in this format "ANE-LX1C66".
Then extract it and copy the "dload" folder to the root of your sd card.
Then power off your device if it isn't and then press POWER + Volume Plus + Volume Minus at the same time until a circle with EMUI appears.
That will erase all data and lock your bootloader.
Cheers!
AS
Click to expand...
Click to collapse
Ah, yeah, forgot to mention I already tried that. Unfortunately it doesn't work. It just says "software install failed". I'm genuinely about to throw this f***ing thing into orbit
Thanks for your help though.
Afifus said:
Ah, yeah, forgot to mention I already tried that. Unfortunately it doesn't work. It just says "software install failed". I'm genuinely about to throw this f***ing thing into orbit
Thanks for your help though.
Click to expand...
Click to collapse
That's weird, are you sure you are installing the right package for your device? It's rare to fail with a correct package.
What's your build number and model ?
ars_chelsea said:
That's weird, are you sure you are installing the right package for your device? It's rare to fail with a correct package.
What's your build number and model ?
Click to expand...
Click to collapse
Tried Oreo build 150 for ane-lx1c432 and ane-lx1c782 since those are the only models my phone could be.
Although, when I do the get-build-number command in fastboot it still says I'm on a Pie build. I'm gonna try doing a Pie build and I'll get back to you.
ars_chelsea said:
That's weird, are you sure you are installing the right package for your device? It's rare to fail with a correct package.
What's your build number and model ?
Click to expand...
Click to collapse
Yeah, pie didn't work either.
Afifus said:
Yeah, pie didn't work either.
Click to expand...
Click to collapse
But there is no signed package for those models yet, what dload files did you use?
Cheers,
AS
ars_chelsea said:
But there is no signed package for those models yet, what dload files did you use?
Cheers,
AS
Click to expand...
Click to collapse
I got it off of firmware finder. Are those not signed?
Afifus said:
I got it off of firmware finder. Are those not signed?
Click to expand...
Click to collapse
No, those are not signed, you need the dload files from Androidhost.ru since it's the only place you can get them for free, here's a link for both the versions you showed:
Single SIM ANE-LX1C432: https://androidhost.ru/Utm
Dual SIM ANE-LX1C432: https://androidhost.ru/Utn
Single SIM ANE-LX1C782: https://androidhost.ru/29Zn
Dual SIM ANE-LX1C782: https://androidhost.ru/1jzD
Choose the right one, and follow the procedure I sent you in a reply above.
ars_chelsea said:
No, those are not signed, you need the dload files from Androidhost.ru since it's the only place you can get them for free, here's a link for both the versions you showed:
Single SIM ANE-LX1C432: https://androidhost.ru/Utm
Dual SIM ANE-LX1C432: https://androidhost.ru/Utn
Single SIM ANE-LX1C782: https://androidhost.ru/29Zn
Dual SIM ANE-LX1C782: https://androidhost.ru/1jzD
Choose the right one, and follow the procedure I sent you in a reply above.
Click to expand...
Click to collapse
Cheers, but unfortunately neither of those worked. I'm at a loss on what else I could try.
Afifus said:
Cheers, but unfortunately neither of those worked. I'm at a loss on what else I could try.
Click to expand...
Click to collapse
at less you back to emui 9.1 only to save your phone
first download the firmware from tm team database search the right firmware for your phone
after that unzip the two files then use huawei extractor to extract files from update.app
and follow this instructions
Copy to the following partitions to the adb fastboot folder:
recovery_ramdisk
recovery_vbmeta
recovery_vendor
cust
kernel
system
userdata
product
vendor
Then boot your device in fastboot mode.
note if you dont found recovery ramdisk then rename recovery ramdis to previous name
The commands for fastboot:
fastboot flash recovery_ramdisk recovery_ramdisk.img
fastboot flash recovery_vbmeta recovery_vbmeta.img
fastboot flash recovery_vendor recovery_vendor.img
fastboot flash cust cust.img
fastboot flash kernel kernel.img
fastboot flash system system.img
aftet that make a wipe / factory reset
what happen to you happen to me the same thing if this work after that then be patience until we get official emui, the last news that i read that huawei postpone release until july
Thanks to kilroystyx
Try this and tell me
yassine2217 said:
at less you back to emui 9.1 only to save your phone
first download the firmware from tm team database search the right firmware for your phone
after that unzip the two files then use huawei extractor to extract files from update.app
and follow this instructions
Copy to the following partitions to the adb fastboot folder:
recovery_ramdisk
recovery_vbmeta
recovery_vendor
cust
kernel
system
userdata
product
vendor
Then boot your device in fastboot mode.
note if you dont found recovery ramdisk then rename recovery ramdis to previous name
The commands for fastboot:
fastboot flash recovery_ramdisk recovery_ramdisk.img
fastboot flash recovery_vbmeta recovery_vbmeta.img
fastboot flash recovery_vendor recovery_vendor.img
fastboot flash cust cust.img
fastboot flash kernel kernel.img
fastboot flash system system.img
aftet that make a wipe / factory reset
what happen to you happen to me the same thing if this work after that then be patience until we get official emui, the last news that i read that huawei postpone release until july
Thanks to kilroystyx
Try this and tell me
Click to expand...
Click to collapse
Holy f*** thank you. That seems to have worked. It also seems to have fixed the sms problem I had with 9.1.
Afifus said:
Holy f*** thank you. That seems to have worked. It also seems to have fixed the sms problem I had with 9.1.
Click to expand...
Click to collapse
great happy for you
Hi everyone
I flashed my LG MAGNA H500TR with H50220a software and now cant flash back even I have the kdz file for proper software.
I tried lgup but it shows phone is as H50220a and giving error and says 'You have to select a known model,please'.
Also tried lg flash tool 2014 but result is 'Required info cannot be found' 'Contact the system administrator'
And lastly tried flash tool 2016 but this time it says wrong dll.
I havent find any solution for this for couple of years so far. The phone just stays bricked on the box.
Waiting your helps.
Best regards....
ByCannn60 said:
Hi everyone
I flashed my LG MAGNA H500TR with H50220a software and now cant flash back even I have the kdz file for proper software.
I tried lgup but it shows phone is as H50220a and giving error and says 'You have to select a known model,please'.
Also tried lg flash tool 2014 but result is 'Required info cannot be found' 'Contact the system administrator'
And lastly tried flash tool 2016 but this time it says wrong dll.
I havent find any solution for this for couple of years so far. The phone just stays bricked on the box.
Waiting your helps.
Best regards....
Click to expand...
Click to collapse
Did you try this https://flashstockrom.com/how-to-flash-stock-firmware-on-lg-h500tr-magna-y90/?
Is your device bootloader unlocked? Can you enter to fastboot and recovery?
[/QUOTE]
Is your device bootloader unlocked? Can you enter to fastboot and recovery?[/QUOTE]
I can enter download mode but phone seen as different model because I flashed wrong firmware. When I use original lg application it does see the phone and can flash new update but when procedure done it's not changed the version. I tried to trick the app by replacing kdz file with h500tr .kdz but result was not working.
SubwayChamp said:
Is your device bootloader unlocked? Can you enter to fastboot and recovery?
Click to expand...
Click to collapse
I checked that website and it gives solutions but the files not compatible with h500tr cuz the post about g3 or some other models. I dunno if it work common but since spesific ı didn't try actually
ByCannn60 said:
I checked that website and it gives solutions but the files not compatible with h500tr cuz the post about g3 or some other models. I dunno if it work common but since spesific ı didn't try actually
Click to expand...
Click to collapse
Use this procedure as reference but with the proper files for your device.
In fastboot you can try flashing all the partitions as possible;
- First delete to be sure a partition and then flash this partition, normally fastboot flashing overwrites the partition but to be sure procede this way; for example type first
Code:
fastboot erase boot
and then type
Code:
fastboot flash boot boot.img
and so on, one by one all the possible files that you will find inside the rom.
And in recovery if you find some OTA update probably you can update the zip through it.
SubwayChamp said:
Use this procedure as reference but with the proper files for your device.
In fastboot you can try flashing all the partitions as possible;
- First delete to be sure a partition and then flash this partition, normally fastboot flashing overwrites the partition but to be sure procede this way; for example type first
Code:
fastboot erase boot
and then type
Code:
fastboot flash boot boot.img
and so on, one by one all the possible files that you will find inside the rom.
And in recovery if you find some OTA update probably you can update the zip through it.
Click to expand...
Click to collapse
can u be more spesific I think I need some files to do that where can I get them?
ByCannn60 said:
can u be more spesific I think I need some files to do that where can I get them?
Click to expand...
Click to collapse
You can extract the files from your kdz rom using this method and tool https://androidmtk.com/extract-kdz-firmware then you can both use the files that I mentioned and also replace conveniently some files like probably dll that gave you error before and then repack the rom and flash it so.
SubwayChamp said:
You can extract the files from your kdz rom using this method and tool https://androidmtk.com/extract-kdz-firmware then you can both use the files that I mentioned and also replace conveniently some files like probably dll that gave you error before and then repack the rom and flash it so.
Click to expand...
Click to collapse
I tried to enter fastboot but my phone just not enters only goes to download mode how can I solve that too.
I would like to ask u a favour. Could u please do it on my pc via Teamviwer? I think Im kinda lost on those informations and cant get it right.
ByCannn60 said:
I tried to enter fastboot but my phone just not enters only goes to download mode how can I solve that too.
I would like to ask u a favour. Could u please do it on my pc via Teamviwer? I think Im kinda lost on those informations and cant get it right.
Click to expand...
Click to collapse
Ok, download the tool linked and the rom unzipped/extracted and get them ready on a same folder on desktop just to have the things clear and I´ll sparse some time in a couple of hours maybe in 4 hours.
While try to perform other different ways to enter to fastboot so I can´t do this remotely, it´s mean usually to enter to download mode is vol down while connecting to pc and I guess that reversing for vol up while connecting to pc you get recovery cause from recovery also you can send device to bootloader/fastboot mode by using the menu and charge the battery well.
SubwayChamp said:
Ok, download the tool linked and the rom unzipped/extracted and get them ready on a same folder on desktop just to have the things clear and I´ll sparse some time in a couple of hours maybe in 4 hours.
While try to perform other different ways to enter to fastboot so I can´t do this remotely, it´s mean usually to enter to download mode is vol down while connecting to pc and I guess that reversing for vol up while connecting to pc you get recovery cause from recovery also you can send device to bootloader/fastboot mode by using the menu and charge the battery well.
Click to expand...
Click to collapse
Since partions messed up cant reach anything out of download mode. I will prepare the files as u wish waiting news from u.
ByCannn60 said:
Since partions messed up cant reach anything out of download mode. I will prepare the files as u wish waiting news from u.
Click to expand...
Click to collapse
I´m not sure if I can help you since you can´t enter to fastboot mode but if you already want to try it.
SubwayChamp said:
I´m not sure if I can help you since you can´t enter to fastboot mode but if you already want to try it.
Click to expand...
Click to collapse
Thanks even for your effort mate. I think last chance is having it serviced from an LG service :good: