I'm a huge fan of wireless charging. I've installed adapters on my past phones. Does anyone have a wireless charging solution for the Pixel?
I'm a huge fan of searching first...
I cant remember the name of the one I have been using since I purchased my Pixel but they are on Amazon and if you have a phone case then it works great and you cant see it. Plus, if you position it right it does not get in the way of the fingerprint sensor.
jtlrwells said:
I'm a huge fan of wireless charging. I've installed adapters on my past phones. Does anyone have a wireless charging solution for the Pixel?
Click to expand...
Click to collapse
InfiniteReality said:
I'm a huge fan of searching first...
Click to expand...
Click to collapse
I have searched but short of modding a case, I haven't seen one I liked
There is this thing that seems good. Strange, but is a solution.
Edit: it's not rated good, but the idea is this, maybe look for other brands
I use this with a case and it works fine. Slow charge though, but fine for overnight.
Why does anyone want wireless charging? Efficiency is always <60% so you are just burning through energy and time.
haibane said:
Why does anyone want wireless charging? Efficiency is always <60% so you are just burning through energy and time.
Click to expand...
Click to collapse
the S8 charged pretty fast wirelessly, but yes, not as fast, but then just plopping it on, keeping it topped off makes world of difference.
I just ordered a qi Pad and a reciver ..as i want to charge the Phone in my car while hear songs via Bluetooth from Spotify..so yes ..i dont want to Put always the usb in everytime i get in my car ..and sure also that i dont want to use a s8 for this..with all the bloodware on it
Alex-V said:
I just ordered a qi Pad and a reciver ..as i want to charge the Phone in my car while hear songs via Bluetooth from Spotify..so yes ..i dont want to Put always the usb in everytime i get in my car ..and sure also that i dont want to use a s8 for this..with all the bloodware on it
Click to expand...
Click to collapse
In theory, you should actually lose charge while listening to Spotify on Qi depending on where your phone is at on its battery life. Qi charging can run as low as 45% efficency, which means your phone might actually be dying faster than its charging.
haibane said:
In theory, you should actually lose charge while listening to Spotify on Qi depending on where your phone is at on its battery life. Qi charging can run as low as 45% efficency, which means your phone might actually be dying faster than its charging.
Click to expand...
Click to collapse
..yes can be..will see how it goes if the parts arrive..will write it here..if Not i have paid around 30 Euros for nothing
Edit
The Charing things can be Controlled with kernel..so we can maybe change the way how qi charge works atm
Related
I would like a mount that also have a good port for USB charge providing good charge rate have seen a few but very poor quality and dont think might charge the Note 3 what should be a good rate for reasonable charging rate?
cito88 said:
I would like a mount that also have a good port for USB charge providing good charge rate have seen a few but very poor quality and dont think might charge the Note 3 what should be a good rate for reasonable charging rate?
Click to expand...
Click to collapse
check out this Naztech one....its a bit pricey but a good one to go for....My dad has this one for his N3 and he is pretty much happy n satisfied with it....so you can give a look at it...may be it will go true on your expectations....
Jimmy2u said:
check out this Naztech one....its a bit pricey but a good one to go for....My dad has this one for his N3 and he is pretty much happy n satisfied with it....so you can give a look at it...may be it will go true on your expectations....
Click to expand...
Click to collapse
ohhh pretty nice! how about charging is it good at it becasuse i used to have a few chargers and none charge the phone takes a lonnnng time to even charge 1% or nothing at all i know any charger WONT charge at same rate of the wall charger but something reasonable. THANKS!
I don't know of anything that does a good job as an all-in-one, but this car charger works exceptionally well. I am able to use GPS, and stream pandora through bluetooth and the device will still charge with the screen on.
http://www.amazon.com/gp/product/B00CD0J4BG/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
Proclip
cito88 said:
I would like a mount that also have a good port for USB charge providing good charge rate have seen a few but very poor quality and dont think might charge the Note 3 what should be a good rate for reasonable charging rate?
Click to expand...
Click to collapse
Really like Proclip. With the custom dash mount.
kudosmog said:
I don't know of anything that does a good job as an all-in-one, but this car charger works exceptionally well. I am able to use GPS, and stream pandora through bluetooth and the device will still charge with the screen on.
http://www.amazon.com/gp/product/B00CD0J4BG/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Dammmnnn 15WATTS definitely will charge ANYTHING lol a shame it doesnt come with a mount
cito88 said:
Dammmnnn 15WATTS definitely will charge ANYTHING lol a shame it doesnt come with a mount
Click to expand...
Click to collapse
Yeah I just use this: http://www.amazon.com/gp/product/B009GSI0MM/ref=oh_details_o00_s00_i01?ie=UTF8&psc=1
It too works very well.
And I just use whatever USB 2.0 cable I have around, or a USB 3.0 cable. It doesn't matter. All charges the same for me. I get 1200 with the screen on, 1800 with screen off.
---------- Post added at 10:05 AM ---------- Previous post was at 09:57 AM ----------
If you're really wanting something that performs well and is all in one, I'd suggest proclip. Unfortunately, I don't have one myself to guarantee it charges well enough.
http://www.proclipusa.com/phone-hol...-and-cigarette-lighter-plug-512564-19506.cmsv
They also have a USB charger, so you'd be able to swap the cig adapter part out for something better
http://www.proclipusa.com/phone-hol...-usb-cigarette-lighter-plug-521564-19506.cmsv
But like I said, I can't guarantee it charges well. I just know proclip usually makes quality stuff.
Downside is you can't use a case with it, and you'd have to get another adapter from proclip to mount it wherever you want to mount it.
But this would be the easiest design where you could just slide the phone in and not worry about having to plug another wire into the usb port on the phone.
Everything else that's available is just a mount + cable + cig adapter. Even the iBolt works the same. You still have to manually plug in the power cord to the USB port on the phone every time. It is the same as using a universal mount + cable
i saw this one at pepboys but not really sure about the quality anyone hear about it?
http://www.bellautomotive.com/Mobile-Device-Holder-p/22-1-22234-8.htm
I use the ram X grip and glued on a Nokia dt900 wireless charger works well I tested with a battery drain app and after an hour it dropped 2% battery. But the app turns everything on and brightness at 100% and does calculations. Battery gets hot. I think if u just have gps running it will keep battery where it's at or even charge it a bit. Also have a anker 24watt usb charger if I need a fast charge.
Mofo84 said:
I use the ram X grip and glued on a Nokia dt900 wireless charger works well I tested with a battery drain app and after an hour it dropped 2% battery. But the app turns everything on and brightness at 100% and does calculations. Battery gets hot. I think if u just have gps running it will keep battery where it's at or even charge it a bit. Also have a anker 24watt usb charger if I need a fast charge.
Click to expand...
Click to collapse
Did you have to also have to get an inverter to work with that?
No I hardwired it to the cars accessory wire and put a fuse in line. The Nokia dt900 is 12v dc same as car. I will have to keep testing to see if it survives the cars fluctuations in voltage from 12-13.5 volts
Sent from my SM-N900T using XDA Premium 4 mobile app
Mofo84 said:
No I hardwired it to the cars accessory wire and put a fuse in line. The Nokia dt900 is 12v dc same as car. I will have to keep testing to see if it survives the cars fluctuations in voltage from 12-13.5 volts
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
oh I see, clever, I hope it last for you. I'm really liking the xmount but it seems a bit pricey. $25+ is just a bit much for a car mount, any deals about?
Has anyone purchased/used one yet? I am looking at getting one, but haven't yet, mostly because I haven't found one that I am sold on. Thanks
I've got two different ones that I've tried now and neither of them keep the phone charging, but the battery will usually stay at the same amount. They charged my Nexus 5 pretty well even under hard use while driving.
RED ZMAN said:
I've got two different ones that I've tried now and neither of them keep the phone charging, but the battery will usually stay at the same amount. They charged my Nexus 5 pretty well even under hard use while driving.
Click to expand...
Click to collapse
I'm having the same issue. Which chargers did you try? Mine is this one
Weird, because my Tylt Vu works just fine with it.
Also interested in seeing what people are finding useful.
I'm looking to buy one soon, and this is the one I have my eyes on now. http://www.amazon.com/CHOETECH-Wireless-Charging-Blackberry-included/dp/B00JA7HNZO
3 Coil Charger and plenty of good reviews
AB_ said:
Also interested in seeing what people are finding useful.
I'm looking to buy one soon, and this is the one I have my eyes on now. http://www.amazon.com/CHOETECH-Wireless-Charging-Blackberry-included/dp/B00JA7HNZO
3 Coil Charger and plenty of good reviews
Click to expand...
Click to collapse
The one you've linked to isn't a car charger..?
Varming said:
The one you've linked to isn't a car charger..?
Click to expand...
Click to collapse
I don't know how I missed everything about this thread.
It's not a car charger, I'll take a seat and just watch. My mistake. Long day at work.
InsaneJester17 said:
I'm having the same issue. Which chargers did you try? Mine is this one
Weird, because my Tylt Vu works just fine with it.
Click to expand...
Click to collapse
Funny enough, one of them is the same one you just posted, just a different brand name. Worked good for my Nexus 5, but my LG G3 usually just stays at the current level when I put it on there with Ingress or Waze plus BT Streaming going on. If it is hot out it loses charge slowly.
Here's the other one.
www.amazon.com/dp/B00INRZVF6/
Grips MUCH better, and is a really nice mount. 3 coil also, but not enough juice to do better than the other one. I've tried multiple 2.1A usb chargers too.
RED ZMAN said:
Funny enough, one of them is the same one you just posted, just a different brand name. Worked good for my Nexus 5, but my LG G3 usually just stays at the current level when I put it on there with Ingress or Waze plus BT Streaming going on. If it is hot out it loses charge slowly.
Here's the other one.
www.amazon.com/dp/B00INRZVF6/
Grips MUCH better, and is a really nice mount. 3 coil also, but not enough juice to do better than the other one. I've tried multiple 2.1A usb chargers too.
Click to expand...
Click to collapse
Good to know. I almost bought the one you have hoping it would solve my issue. Back to the drawing board I suppose.
RED ZMAN said:
Funny enough, one of them is the same one you just posted, just a different brand name. Worked good for my Nexus 5, but my LG G3 usually just stays at the current level when I put it on there with Ingress or Waze plus BT Streaming going on. If it is hot out it loses charge slowly.
Here's the other one.
www.amazon.com/dp/B00INRZVF6/
Grips MUCH better, and is a really nice mount. 3 coil also, but not enough juice to do better than the other one. I've tried multiple 2.1A usb chargers too.
Click to expand...
Click to collapse
Does your DigiYes consistently charge your phone? I have one of the DigiYes models, but I'm finding it frequently stops charging, often within seconds of beginning charging, though sometimes it lasts a few minutes before giving up. I always get the "Wireless Charging" message on the display, never the "slow charging" warning.
I tried swapping their 2.1A cigarette lighter adapter for an Anker 2.4A charger -- same deal. Tried adjusting the vertical position in the charger -- sometimes seems to last a little longer before giving up, but generally doesn't help at all. When it stops charging, the blue light stays on (rather than going back to green).
When it does charge, I seem to get a decent charge current out of it. Very confusing, and probably going to get shipped back.
Edit: it seems to drop out less when charging from wall power, though it still happens -- perhaps correlated with greater power demands on the phone (Google Earth).
I did state above that it charges my phone, but if Navigation and BT Streaming is going on it keeps it at a steady level, or if hot discharges slowly.
If you don't have a 3 coil QI charger, positioning is very important, if it charges and stops, it is a positioning issue for sure.
Changing to a higher amperage charger won't help, as Qi only puts out so much. The new Qi standard coming out should fix this for us though, it transmits 2 amps I think, and has more distance so positioning shouldn't matter AS much.
RED ZMAN said:
I did state above that it charges my phone, but if Navigation and BT Streaming is going on it keeps it at a steady level, or if hot discharges slowly.
If you don't have a 3 coil QI charger, positioning is very important, if it charges and stops, it is a positioning issue for sure.
Changing to a higher amperage charger won't help, as Qi only puts out so much. The new Qi standard coming out should fix this for us though, it transmits 2 amps I think, and has more distance so positioning shouldn't matter AS much.
Click to expand...
Click to collapse
Does the DigiYes disconnect constantly like the one I have? Or no?
Nope.
My other one did, but after adjusting how high it sat with the bottom brace that problem went away.
My air dock keeps the phone at a steady charge while running navigstion, bluetooth (aptx) via stock music app, and 100% brightness. The thermal protection activates eventually and lowers the brightness to 90%, and then it starts to very slowly charge. It charges fast if not running anything.
Also, you don't need 3 charging coils. My powerbot disk style charger easily works without worrying about position. I opened it up and the whole thing (~2.5") is one big coil. The air dock works well too, but I haven't opened it up.
flaring afro said:
My air dock keeps the phone at a steady charge while running navigstion, bluetooth (aptx) via stock music app, and 100% brightness. The thermal protection activates eventually and lowers the brightness to 90%, and then it starts to very slowly charge. It charges fast if not running anything.
Also, you don't need 3 charging coils. My powerbot disk style charger easily works without worrying about position. I opened it up and the whole thing (~2.5") is one big coil. The air dock works well too, but I haven't opened it up.
Click to expand...
Click to collapse
I have two air docks (from the original crowd funding campaign) and neither one of them will hold my G3 (with the included magnets used). How well is your sticking? I wonder if I got an early batch that didn't stick well?
Patrick
preilly44 said:
I have two air docks (from the original crowd funding campaign) and neither one of them will hold my G3 (with the included magnets used). How well is your sticking? I wonder if I got an early batch that didn't stick well?
Patrick
Click to expand...
Click to collapse
It works perfectly fine. Does yours use both magnets and the suction pad? I believe they were separate options in one development point. Also, my car was dusty and it did get some dust on the pad which made it not hold, but wiping it with a damp cloth and letting it dry fixed that issue.
InsaneJester17 said:
Does the DigiYes disconnect constantly like the one I have? Or no?
Click to expand...
Click to collapse
My DigiYes 3 coil frequently disconnects, sometimes in a constant connect-disconnect loop. Other times it holds for a while. It seemed to do better when I put it on a higher amperage charger than it came with, along with the original G3 cable. However this could be coincidence. When it does charge, the charging rate is comparable to any of my desktop qi chargers.
How is this even possible? While using NAV, my G3 is plugged into the car charger is still decreasing in battery life. Albeit slower than when not charging, but it still goes down even though it is charging. What gives?
Using a charger bought at VZW.
Make sure the charger is 2.1 amp...if its a 1 amp, the combo of GPS, data, and screen on will still kill it.
SOCOM-HERO said:
How is this even possible? While using NAV, my G3 is plugged into the car charger is still decreasing in battery life. Albeit slower than when not charging, but it still goes down even though it is charging. What gives?
Using a charger bought at VZW.
Click to expand...
Click to collapse
Yup, totally depends on the charger. Some cheap ones are only .5A and most are 1A, which probably still isnt enough when using GPS and screen on.
SOCOM-HERO said:
How is this even possible? While using NAV, my G3 is plugged into the car charger is still decreasing in battery life. Albeit slower than when not charging, but it still goes down even though it is charging. What gives?
Using a charger bought at VZW.
Click to expand...
Click to collapse
Do yourself a favor and buy mandatory this quality accessories. After you do, forget your question
Car charger:
http://www.amazon.com/Portable-Dual...=1407899058&sr=8-3&keywords=anker+car+charger
USB charging cable:
http://www.amazon.com/2-1A-30PIN-Ch...=UTF8&qid=1407899014&sr=8-6&keywords=kopi+usb
czaplin said:
Do yourself a favor and buy mandatory this quality accessories. After you do, forget your question
USB charging cable:
http://www.amazon.com/2-1A-30PIN-Ch...=UTF8&qid=1407899014&sr=8-6&keywords=kopi+usb
Click to expand...
Click to collapse
How is an old iPhone charger going to help anyone with a G3? Also, what is "this quality"? I think you might've lost or misspelled a word there.
phobos512 said:
How is an old iPhone charger going to help anyone with a G3? Also, what is "this quality"? I think you might've lost or misspelled a word there.
Click to expand...
Click to collapse
Sorry, bad link.
Here's correct one:
http://www.amazon.com/gp/aw/d/B009Z...2e07d400f0894e43b48&pi=SS115#ref=pd_aw_sims_1
Sent from my VS985 4G using XDA Free mobile app
I had this problem starting all the way back on Galaxy Nexus - crappy chargers and cables do not provide enough power to run the phone and the screen. My research and trial and error on many chargers lead me to understand that not only do you need a good high power charger, you need a good cable too. I now run 18awg charge-only cables exclusively as well as a 2.1amp charger. This pair has worked on all my devices since including fast charging on my G2 and G3.
Note that a charge-only USB cable has the data pair shorted and will only work for charging - will not work for data transfer. However the wires inside are thick and work great cars or other situations where you don't need the cable for data.
This is what I use:
Cable
http://www.netimes.com/shop/microusb-charging-cable-black-d-d-shorted18awg100cm-p-3699.html
Charger
http://www.netimes.com/shop/dual-usb-car-charger-adapter-10a-21a-white-p-4810.html
This company is from Hong Kong, but they have pretty fast shipping. It is the only place where I can find (affordable) heavy gauge USB cables.
Same Issue
SOCOM-HERO said:
How is this even possible? While using NAV, my G3 is plugged into the car charger is still decreasing in battery life. Albeit slower than when not charging, but it still goes down even though it is charging. What gives?
Using a charger bought at VZW.
Click to expand...
Click to collapse
I had the same issue with a store-bought charger. It also depends on the amperage output of your vehicle's outlet as well.
If anyone is looking for one with a retractable cable, I bought this one:
http://www.amazon.com/EZOPower-Micr...=8-2&keywords=2.1+amp+usb+charger+retractable
Curious if any QI chargers trickle charge like USB connection vs switching on and off constantly
bob2300nx said:
Curious if any QI chargers trickle charge like USB connection vs switching on and off constantly
Click to expand...
Click to collapse
For sure I know that the Tylt Vu isn't trickle charging too well. It gets to 100%, when it decreases, it charges again. So I constantly hear the charge sound again.
Powerbot round does not
So I guess no QI chargers trickle?
Ended up going with this, was 11.99 with prime:
http://www.amazon.com/gp/product/B00LFVPVHK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Choe does trickle charge
The issue is with the Nexus 6 refusing to trickle charge on qi for whatever reason.
cmh714 said:
Choe does trickle charge
Click to expand...
Click to collapse
my95z34 said:
The issue is with the Nexus 6 refusing to trickle charge on qi for whatever reason.
Click to expand...
Click to collapse
Getting mixed signals over here. I wonder who is right?
bob2300nx said:
So I guess no QI chargers trickle?
Ended up going with this, was 11.99 with prime:
http://www.amazon.com/gp/product/B00LFVPVHK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I think the misspelled Italian that should be red flag.
dligon said:
I think the misspelled Italian that should be red flag.
Click to expand...
Click to collapse
Actually if you check the reviews on here and amazon, they are pretty good. These chargers aren't that complicated, no point in paying more.
bob2300nx said:
Actually if you check the reviews on here and amazon, they are pretty good. These chargers aren't that complicated, no point in paying more.
Click to expand...
Click to collapse
True you only pay more for extra coils the name brand and possible quality build.
Nexus 4 orb
The nexus 4 orb charger works great with the Nexus 6. Charges to 100%, stops, then starts up again at around 96%. However, this stop/start charging cycle does not make any noise.
I did notice early on that my Nexus 6 would hit 100% charge, then completely stop. This was on a custom kernel (Franco), but once I replaced that with a different kernel (leanKernel), wireless charging started behaving properly again.
the Choe keeps it at 99 or 100, basically always charging....no extra sounds here either...IMHO works great.
and through a Ringke Fusion case
My question is this something to do with the nexus or all QI phones in general? Do they normally goto trickle charge? If so google should fix this, id imagine this cant be good for the battery actually really bad for the battery. Going really low or really high wears the battery more than keeping it in more of the ~30-80 range. Yo-yoing like that cant be good for the battery.
I have these too coming, will update with how they work
http://www.amazon.com/gp/product/B00S7IKRK0/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
http://www.amazon.com/gp/product/B00LFVPVHK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Both for $38 shipped
I have a qifull wireless car charger and on rides home from work when battery is at about %50, my phone temp will go up to 120-130f. This is with Franco Kernel set to Power Saving Mode, and even with the screen off. It's always done this with different kernels ect... I read somewhere that this can happen if the phone is not able to properly align with the coils?
Qifull QC2015 3-Coils Qi Wireless Car Charger Dock with One Touch S... http://www.amazon.com/dp/B00OFQXEKS/ref=cm_sw_r_udp_awd_Qfzcvb1P7WG53
Sent from my Nexus 6
Has anyone had success getting wireless charging to work on the 6T? Before you start, I know, it's not built in. I mean with one of those little cards you plug into the bottom and slip between the phone and case. I have a 10w capable charging pad I'd like to use. The receiver I got doesn't seem to go in far enough. When plugged in to my old 3T, it will charge wirelessly and it doesn't go all the way into the phone unlike the 6T. I noticed that with the official OP charging cable there is a little click when inserting when then and only then it will charge. I can't get the receiver in far enough before bottoming out to get that click. Or would current output not be high enough on the receiver for the phone to recognize?
CosMiiK said:
Has anyone had success getting wireless charging to work on the 6T? Before you start, I know, it's not built in. I mean with one of those little cards you plug into the bottom and slip between the phone and case. I have a 10w capable charging pad I'd like to use. The receiver I got doesn't seem to go in far enough. When plugged in to my old 3T, it will charge wirelessly and it doesn't go all the way into the phone unlike the 6T. I noticed that with the official OP charging cable there is a little click when inserting when then and only then it will charge. I can't get the receiver in far enough before bottoming out to get that click. Or would current output not be high enough on the receiver for the phone to recognize?
Click to expand...
Click to collapse
I have been using wireless charging since day one. No issues at all. Lay it on wireless charger at night. Wake up to full charge. No need to charge through out the day cause battery is fantastic. This is the one I use.
https://www.amazon.com/gp/aw/d/B01M11UT3V?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2
borijess said:
I have been using wireless charging since day one. No issues at all. Lay it on wireless charger at night. Wake up to full charge. No need to charge through out the day cause battery is fantastic. This is the one I use.
https://www.amazon.com/gp/aw/d/B01M11UT3V?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2
Click to expand...
Click to collapse
Thank you! Just ordered one.
What is the point of using that thing are you guys saying you keep it plugged into the phone all day long? Wouldn't that get in the way or be annoying?
Swimguy14 said:
What is the point of using that thing are you guys saying you keep it plugged into the phone all day long? Wouldn't that get in the way or be annoying?
Click to expand...
Click to collapse
This phone can pretty much be charged once a day with the way most of us are using it. Having it slowly charge over night with wireless charging may be less straining in the battery. I'm tempted but so far I just charge to around 80% at night before bed and unplug overnight.
I was looking at that one on Amazon. Seems like the gold one on there may be better?
My question is, if you have to plug the wireless charging card into your USB C port anyway, does that defeat the entire purpose? Not dissing it or anything, that's very subjective, but.....
H4X0R46 said:
My question is, if you have to plug the wireless charging card into your USB C port anyway, does that defeat the entire purpose? Not dissing it or anything, that's very subjective, but.....
Click to expand...
Click to collapse
That's what I was thinking
Swimguy14 said:
That's what I was thinking
Click to expand...
Click to collapse
Just remove cable. No big deal I have done this. Plus I don't use the dongle only Bluetooth headphones.
The reason that I use a wireless charging receiver pad plugged into my usb-c is because I've seen more than one of them go bad on other phones.
Besides the power button, the next most likely part of a phone to fail is its charge port. Likely because of sheer mechanical wear and tear on both these components. Which is why I use gestures to turn on and off my display, and that wireless receiver.
However, it's not without drawbacks:
- I'm not sure that having something perpetually plugged in doesn't stress the port much less than taking something in and out. But I figure it does.
- It's a pain to use the port for anything else, like otg drives or wired headphones or adb
- dash charging is WAY faster than wireless
CosMiiK said:
Has anyone had success getting wireless charging to work on the 6T? Before you start, I know, it's not built in. I mean with one of those little cards you plug into the bottom and slip between the phone and case. I have a 10w capable charging pad I'd like to use. The receiver I got doesn't seem to go in far enough. When plugged in to my old 3T, it will charge wirelessly and it doesn't go all the way into the phone unlike the 6T. I noticed that with the official OP charging cable there is a little click when inserting when then and only then it will charge. I can't get the receiver in far enough before bottoming out to get that click. Or would current output not be high enough on the receiver for the phone to recognize?
Click to expand...
Click to collapse
Why would you like to have a wireless charger? The cable charging is amazing is so fast. I normally charge round at 30 percent and I went to play battlefield 5 two games my phone will be fully charged is so fast. Not worth it to get a wireless charger. But is your phone do what you want I'm just here to give you a opinion lol
CosMiiK said:
Thank you! Just ordered one.
Click to expand...
Click to collapse
borijess said:
I have been using wireless charging since day one. No issues at all. Lay it on wireless charger at night. Wake up to full charge. No need to charge through out the day cause battery is fantastic for Edu Birdy website. This is the one I use.
https://www.amazon.com/gp/aw/d/B01M11UT3V?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2
Click to expand...
Click to collapse
Thanks. This battery fixed my problem.
borijess said:
I have been using wireless charging since day one. No issues at all. Lay it on wireless charger at night. Wake up to full charge. No need to charge through out the day cause battery is fantastic. This is the one I use.
https://www.amazon.com/gp/aw/d/B01M11UT3V?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2
Click to expand...
Click to collapse
Does it work if I have the terminal with the original red case?
Lack of wireless charging is my only real gripe with the 6T. This sounds like a good solution if you never plan to use the USB port. I like the quick wired charging but having the option for wireless would be a good feature. How hard could it have been for OnePlus to add? Is the back case metal? It looks like glass to me.
Just easier for me to plug in my USB-C slow charger. Not sure what the advantage is to doing this. If you put it between the back of the phone and a case, I get it. Just plugging it into a USB-C wireless receiver seems like a waste of 15 -20 bucks for zero gain. At least for me.
I bought this one so I can still charge it if needed. https://www.amazon.com/gp/product/B07QNW32V4/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1