I have huawei Y520-U22. Here is the detail of problem.
1. The cell shows "Unfortunately, xyz has stopped" while opening any app. Here xyz refer to any app installed. (Screenshot attached)
2. When i somehow entered in settings and try to Reset the phone, Nothing happened when selects Erase everything .
3. Then I Hardreset the phone from recovery. But after hardreset nothing changed/formatted.
4. Tried SP Flash tool to flash the firmware, the flashing process completed 100% and OK. when i power on the phone again nothing changed, same old creepy software.
5. Then i tried Vocano Tools, (Meerapi, Inferno etc.), the formatting goes 100 % ok but everything time nothing changed.
The local shopkeepers told us that this phone can not be flashed.
So my dear experts after all the above tedious work i am here at this forum again with hope that I may find some solution regarding above mentioned problem.
zaheer_rose said:
I have huawei Y520-U22. Here is the detail of problem.
1. The cell shows "Unfortunately, xyz has stopped" while opening any app. Here xyz refer to any app installed. (Screenshot attached)
2. When i somehow entered in settings and try to Reset the phone, Nothing happened when selects Erase everything .
3. Then I Hardreset the phone from recovery. But after hardreset nothing changed/formatted.
4. Tried SP Flash tool to flash the firmware, the flashing process completed 100% and OK. when i power on the phone again nothing changed, same old creepy software.
5. Then i tried Vocano Tools, (Meerapi, Inferno etc.), the formatting goes 100 % ok but everything time nothing changed.
The local shopkeepers told us that this phone can not be flashed.
So my dear experts after all the above tedious work i am here at this forum again with hope that I may find some solution regarding above mentioned problem.
Click to expand...
Click to collapse
Hi, is there any update for your problem? We're the same issue.
any one help i have same problem
i have same problem any one help?
i have the same problem, flashed my huawei y520-U22 phone too but nothing change, pls help out.
I have also gotten into this mess. only file manager works but i cannot delete anyfiles there. So far till now the problem with my device is its has malware apks (7 or 8 i think) which are stopping the phone to work and crashing apps. I even can't connect to pc in any way. Stuck till now.
zaheer_rose said:
I have huawei Y520-U22. Here is the detail of problem.
1. The cell shows "Unfortunately, xyz has stopped" while opening any app. Here xyz refer to any app installed. (Screenshot attached)
2. When i somehow entered in settings and try to Reset the phone, Nothing happened when selects Erase everything .
3. Then I Hardreset the phone from recovery. But after hardreset nothing changed/formatted.
4. Tried SP Flash tool to flash the firmware, the flashing process completed 100% and OK. when i power on the phone again nothing changed, same old creepy software.
5. Then i tried Vocano Tools, (Meerapi, Inferno etc.), the formatting goes 100 % ok but everything time nothing changed.
The local shopkeepers told us that this phone can not be flashed.
So my dear experts after all the above tedious work i am here at this forum again with hope that I may find some solution regarding above mentioned problem.
Click to expand...
Click to collapse
Have you solved problem in your Huawei phone ? my phone has also the same matter.
Related
hi all,
Since a week or 2 my phone is constantly giving messages like this: "The application LogsProvider (process com.sec.android.provider.logsprovider) has stopped unexpectedly"
When i make a new contact or a new file on my phone, it disapears after rebooting. When i uninstall all my apps and reboot the phone, all the apps are back and nothing has been uninstalled. Even when i format the sd card on my pc, and reboot the phone, all the content is back as if nothing has happened.
When i try to reset it to factory settings, it opens in recovery mode. When i then select to wipe all data or wipe cache and reboot, nothing has happened to it, everything is still on the phone like before. Even when i deselect the backup and automatic recovery checkboxes before i reset to factory settings, nothing has been wiped.
When i try to update the phone with kies, the update installs correctly, but when the phone reboots, the same old firmware is still installed and the settings are intact.
When i try to update the phone with Odin, everything goes well, and it says 'pass' in green color. when i reboot the phone, the same old firmware and settings are still there.
I run stock firmware from november '11, which i can tell by dialing *#1234*
Can anyone help me identify this problem, and is there a solution? It really looks like this phone has some write protection or something..
i made a youtube video that describes the problem, but this forum doesn't allow me to make a link.
anyway, my phone stays stuck on the 3rd of september and that sucks.. any solutions plz?
the video
i can't post the link, so let's try it like this:
First type the 'www', then the 'youtube', then the '.com', then type 'watch?v=n6SH8QDJr94&feature=g-upl'
Flash custom kernel, do a factory reset in CWM and see if the data is gone.
i've already tried to install cwm, but first i needed to root my phone. When i tried to root it, it could not find the Root.zip on the sd card, although i'm pretty sure i put it there, it just disapeared after the reset, just like all the other files..
Flash it [kernel] through Odin (PC).
allright, i will try that, thanks already!
ehm, even that didn't do anything, i will upload a youtube video in a few minutes..
the youtube video:
type 'youtube', then '.com', then '/watch?v=P_D2EbPF0Ik&feature=youtu.be', without the '..
really strange how i can update the kernel and nothing has changed!
I really start thinking there is some kind of write protection or the internal storage is totaly screwed up?
Seems your nand is partially borked, and is stuck in a state where it will not update the memory, so it is "stuck" at a specific point in time.
I have heard that it's POSSIBLE (and I stress possible) that flashing with repartition ticked with the PROPER .pit file will resolve your issue, but I cannot say this with any certainty as I have not actually done this myself. But at this point, it seems you don't really have anything to lose by trying.
I can't seem to find a reliable download link for the .pit file for the I9100 right now... it's called u1_02_20110310_emmc_EXT4.pit. I'll see if I can't find one when I have a spare moment.
EDIT: Found one - http://forum.xda-developers.com/showpost.php?p=28321934&postcount=35. BUT!!! Only use it if you are positive you have an I9100. (check on the label under the battery) Flash it with a stock firmware with re-partition checked.
False alarm. Turns out the link is dead.
EDIT 2: This looks promising... http://forum.xda-developers.com/showthread.php?t=1448351
I do not exactly know how a phone looks like when its 'Bricked' but I believe there is something very wrong with my Xolo Q800.
Just a week back, a couple of applications stopped working. I restarted and since then its been restarting if I open any application. The OS has freezed itself into the state it was at 2pm on Tuesday 9th December. All I can do is receive calls and sometimes even dial them. Once I restart it says one by one all the Google background processes stop working. At times while receiving calls, the dailer UI goes away, and then it restarts and freezes to Boot Animation, so I have to remove the battery and then start again.
I tried wiping it completely from TWRP recovery that is already installed. Didnt work. Tried formatting by going into the settings inside the OS - MIUI, that is installed. It will restart but would come back to same state as it was at 2pm Tuesday 9th.
I tried using the following links, followed the exact process to unbrick and install the real OS, still it would come back to the same state as it was on 2pm Tuesday 9th.
Not to mention I did use 'Run as Administrator' while using SP Tools.
Link 1 : http://www.blog-android.com/uncatego...ick-your-xolo/
Link 2 : http://xoloq800roms.blogspot.in/2013...446gionee.html
Link 3 : http://androidxda.com/flash-stock-ro...one-flash-tool
Link 4 : http://forum.xda-developers.com/show....php?t=2650125
Link 5 : https://docs.google.com/a/nid.edu/fi...Qk0/edit?pli=1
and a couple of more links, which I cant find now.
I'm really desperate now to make it work.
Really in need of help.
PS: I have tried multiple custom roms to flash, but nothing helped, nothing changed. I even tried installing CWM recovery http://xoloq800roms.blogspot.in/2013...k-rom-and.html
Nothing helped, nothing changed. Its still on that same state and would restart if I would try use applications.
Hello All.
I have a very weird issue. Yesterday my cousin left me her Y320-U151 because it has multiple "stop working" messages.... such as the launcher, play services, google+, FB messenger etc. making impossible to use. The fist attempt to solve this problem was a hard reset in the configuration. After the process the phone still with the same configuration, wallpaper, apps and the same crash messages.
The second try was to wipe the user data and cache ( factory reset) in recovery, the process was successful but when the phone start up it continues whit the same apps, wallpaper, config i mean the factory reset does not make any effect
The last attempt fix was download a clean firmware and try to load it in recovery mode.... And i had the same result, i mean no changes in the system
The most weird problem is if for instance I uninstall a random app like facebook and i make a reboot the facebook app appears in the system again, It looks like a persistent image of the system.... so any changes roolback after a reboot.
Any Ideas?? Thanks in advance
Hi @ViciousCC, I have the same problem here with a Y320 device, I tried to flash the stock firmware via the SP flash tools, and the whole process runs fine, except when I reboot the phone, it seems that the changes didn't take effect. Did you find a suitable solution?
guichochepe said:
Hi @ViciousCC, I have the same problem here with a Y320 device, I tried to flash the stock firmware via the SP flash tools, and the whole process runs fine, except when I reboot the phone, it seems that the changes didn't take effect. Did you find a suitable solution?
Click to expand...
Click to collapse
Any solution? I have the exact same strange issue with Huawei Y320-U30
First I'd like to thank you all for this forum, it helped us very much.
A few weeks ago My P780 (with english KitKat, rooted by seller) started showing these error messages "calendar has stopped working" "acore has stopped working" "google services has stopped working" "(random app) has stopped working". Only pushing the reset button got rid of these messages. These crashes became more and more frequent and I decided to try and solve it. I watched many "how to" videos on youtube and I decided to clear cache in factory mode. It did not solve it. Than I saved all my important data, and did a factory reset. The loading screen was on for too long, and I thought it froze, so I pushed reset. This made my phone to have a boot loop.
My brother has the exact same phone, and he did a Jellybean upgrade a year ago, and it was successful. So I have my phone to him, to repair it. Just by curiosity he did a memory check on HIS P780, and when he stopped it, it almost made his phone brick. So we had 2 identical bricked P780s.
After so many tries, he disconnected the battery and managed to recover his phone, and it works perfectly again. The strange thing is, he can't repair my phone though using the same method, same software, same driver, same cable and trying many ROM versions. After installing ROM, my phone works perfectly, but when he installs google services, all those "unfortunately stopped" error messages return. We can't understand why these error messages appear, if the phone was reflashed so many times and we tried so many ROMs. Does anybody have a clue?
forzal said:
First I'd like to thank you all for this forum, it helped us very much.
A few weeks ago My P780 (with english KitKat, rooted by seller) started showing these error messages "calendar has stopped working" "acore has stopped working" "google services has stopped working" "(random app) has stopped working". Only pushing the reset button got rid of these messages. These crashes became more and more frequent and I decided to try and solve it. I watched many "how to" videos on youtube and I decided to clear cache in factory mode. It did not solve it. Than I saved all my important data, and did a factory reset. The loading screen was on for too long, and I thought it froze, so I pushed reset. This made my phone to have a boot loop.
My brother has the exact same phone, and he did a Jellybean upgrade a year ago, and it was successful. So I have my phone to him, to repair it. Just by curiosity he did a memory check on HIS P780, and when he stopped it, it almost made his phone brick. So we had 2 identical bricked P780s.
After so many tries, he disconnected the battery and managed to recover his phone, and it works perfectly again. The strange thing is, he can't repair my phone though using the same method, same software, same driver, same cable and trying many ROM versions. After installing ROM, my phone works perfectly, but when he installs google services, all those "unfortunately stopped" error messages return. We can't understand why these error messages appear, if the phone was reflashed so many times and we tried so many ROMs. Does anybody have a clue?
Click to expand...
Click to collapse
Can you be more specific? What firmware did you flashed? Most of them have GAPPS installed.
Did you flashed the firmware with SP Flash Tool?
stympy said:
Can you be more specific? What firmware did you flashed? Most of them have GAPPS installed.
Did you flashed the firmware with SP Flash Tool?
Click to expand...
Click to collapse
Yes, we used SP Flash Tool.
We tried firmware/ROM: "s129" (factory) and "p780_s941_vibeui_v2.0_1512". Both without GAPPS, because our phones are CE (china), not ROW (rest of the world). CE firmware does not include GAPPS. Tomorrow we will try to install ROW firmware.
forzal said:
Yes, we used SP Flash Tool.
We tried firmware/ROM: "s129" (factory) and "p780_s941_vibeui_v2.0_1512". Both without GAPPS, because our phones are CE (china), not ROW (rest of the world). CE firmware does not include GAPPS. Tomorrow we will try to install ROW firmware.
Click to expand...
Click to collapse
Ok. I understand now. Try to flash ROW and see what is going on.
stympy said:
Ok. I understand now. Try to flash ROW and see what is going on.
Click to expand...
Click to collapse
We installed VIBEUI_2.0_1512_7.149_1_ST_P780_baralajbi, this version included GAPPS and it workes perfectly. Everything is way better than the factory ROM. Unfortunately after a few days of usage the same problem returned (android unfortunately stopped), but now I noticed something. My phone keeps overheating.
I remember now, this has happened before, with the factory ROM, my phone became hot all the time, but I thought it's because of the very hot summer temperature. Now I noticed, that even if I keep the phone in my pocket, wifi, data transfer, gps, and everything turned off, not many applications running in the background, and my phone is still quite hot. When I turn the screen on and start using some apps, after 10-15 minutes it crashes.
forzal said:
We installed VIBEUI_2.0_1512_7.149_1_ST_P780_baralajbi, this version included GAPPS and it workes perfectly. Everything is way better than the factory ROM. Unfortunately after a few days of usage the same problem returned (android unfortunately stopped), but now I noticed something. My phone keeps overheating.
I remember now, this has happened before, with the factory ROM, my phone became hot all the time, but I thought it's because of the very hot summer temperature. Now I noticed, that even if I keep the phone in my pocket, wifi, data transfer, gps, and everything turned off, not many applications running in the background, and my phone is still quite hot. When I turn the screen on and start using some apps, after 10-15 minutes it crashes.
Click to expand...
Click to collapse
I understand now. This is an hardware problem.
I registered my account on this website just to share my awesome experience with Nokia 1.
I am very much thankful to XDA and many other sites whose text assisted me in recovering my mobile.
WARNING: VERY LARGE TEXT BELOW AND ITS JUST MY EXPERIENCE, I AM NOT RESPONSIBLE IF SOMEONE TRY TO GET ANY IDEAS FROM IT AND BRICK HIS PHONE
I purchased Nokia 1 (TA-1047). My only objective was to automatically record sound from 8AM to 2 PM. So I started root process (Devmode: OK, boot loader unlock: OK, TWRP flashing and running: OK)
BUT WHAT? TWRP is asking for a password... this was not provided in the guide. I tried blank password... not OK. Then I searched the Internet and learned that if I cancel on password screen and then Wipe data then it will be fine. I did that, then made full backup (ADB), and flashed Magisk (ADB)..OK. Restarted the phone and "bump": Phone told me it failed to decrypt and then it went into TWRP boot-loop.
Then I searched again and found TA-1060 recovery bin (from this site) and stock images. I flashed TA-1060 recovery (at that time I did not know that I could go to Boot-loader from TWRP and wasted like an hour to do it using buttons - Correct method is: power off the phone, connect the usb cable, press power and volume down till you see android logo). After flashing 1060 recovery I was able to reset phone and "voila" Magisk was also there.
Now I installed Schedule Voice Recorder, Team-Viewer Host (to transfer big files remotely), App locker (to lock settings and play store), Autostart and Stay (because recorder was getting closed), Dropbox and Dropsync --- and you can guess what would have happened. My mobile kept closing them randomly even if I made Recorder and AutoStart system app and whitelisted in developer setting and set to NOT optimized battery. So I tried to disable Nokia bloat-wares and damaged the system again. This happened for a few iterations before I realized that the Nokia 1 RAM is not sufficient to handle all these apps and I got an idea to upload earlier android version (Spoiler! Hard-brick is coming).
I searched on internet for similar mobile and found Huawei Y3 2017 with same chipset and configuration, Y5 with same chipset but higher configuration. Downloaded stock rom for both. First tried flashing boot and system from TWRP but failed saying that size was different? Downloaded SP flash tool, somehow passed through drivers issue (this would require another thread ). Tried flashing (with formatting) both Y3 2017 UO00 (which was different chipset but i altered scatter file) and Y5 but it failed on some check error. After that my phone was hard bricked!
Then I downloaded nokia 1 stock firmware but it was bad scatter file (only nvram and nvdata was showing), altered it, format+flash: failed again. Searched on internet and found that if I flash wrong preloader then I am done. I was not sure if I had already done it. I altered the scatter file again to include only preloader and thankfully it showed success but any other rom after it, it failed to flash. Found something like Nokia 3 DA and tried it but also failed.
FINALLY: I found nokia 1 nb0 rom and nb0 extractor, extracted rom using that, flash it and "voila" my phone was back alive. Tried to root but failed (because serial number was not same as before and new number did not work). Then I started iterations by mixing roms from my backup and using my "proinfo.bin" and stock rom my phone revived with my own serial number. BUT, then I flashed stock preloader and lk but everything else from Huawei, it failed with check error and then also refused to format for stock rom. Searched on internet about manual formatting, did that (WARNING: starting from address where preloader ends otherwise you would format your preloader as well) then it was back okay.
Rooted again, copied scheduler in sys-priv, whitelisted, not optimize battery. Also team viewer host (normal settings) and dropbox and sync (normal settings). As a work around I have now scheduled the app to record 24 hours instead of 8AM to 2PM so that it always remain as foreground app. 11 hour testing so far so good.
QUESTION: Can I not upload lesser android version (e.g. 4.4 or 5 or 6)? If I can then how.?
UPDATE: The Recorder is killed by OS again as well as team viewer host (even when recorder apk was in system/priv-app)
Is there any way to keep it always ON?
Or is there any way to installed some previous version of android?
goodboy84h said:
UPDATE: The Recorder is killed by OS again as well as team viewer host (even when recorder apk was in system/priv-app)
Is there any way to keep it always ON?
Or is there any way to installed some previous version of android?
Click to expand...
Click to collapse
Every Nokia 1 user is facing background app crash problem. Infact Nokia 5 users also. It simply crashes background apps like pressing force close and as of now there is no solution. we have to wait until nokia releases a fix.
By the way which build number are you using?
coolboyforeva said:
Every Nokia 1 user is facing background app crash problem. Infact Nokia 5 users also. It simply crashes background apps like pressing force close and as of now there is no solution. we have to wait until nokia releases a fix.
By the way which build number are you using?
Click to expand...
Click to collapse
TA-1047
coolboyforeva said:
Every Nokia 1 user is facing background app crash problem. Infact Nokia 5 users also. It simply crashes background apps like pressing force close and as of now there is no solution. we have to wait until nokia releases a fix.
By the way which build number are you using?
Click to expand...
Click to collapse
Maybe you have so many apps in the background, I had Instagram, YouTube and Facebook life in the background and I get rare force closes or I might be lucky I have a Nokia 1 TA-1060
mattwhite7102 said:
Maybe you have so many apps in the background, I had Instagram, YouTube and Facebook life in the background and I get rare force closes or I might be lucky I have a Nokia 1 TA-1060
Click to expand...
Click to collapse
No its an os bug from nokia side. It fails to work as it should after a particular update. Maybe u r not facing coz u have only 3 apps that too light ones from good app makers, google and fb. But if u add some more like any call recorder ( as mentioned by op)u would also face same problem i believe. It doesnt thows a FC but simple kills the app in background and u dont get notified.
UPDATE :- Here is the solution
https://forum.xda-developers.com/showpost.php?p=77685710&postcount=4
goodboy84h said:
UPDATE: The Recorder is killed by OS again as well as team viewer host (even when recorder apk was in system/priv-app)
Is there any way to keep it always ON?
Or is there any way to installed some previous version of android?
Click to expand...
Click to collapse
Try this to avoid app crash. it works.
https://forum.xda-developers.com/showpost.php?p=77685710&postcount=4
HELP!!! Mine is stuck at Nokia logo screen
goodboy84h said:
I registered my account on this website just to share my awesome experience with Nokia 1.
I am very much thankful to XDA and many other sites whose text assisted me in recovering my mobile.
WARNING: VERY LARGE TEXT BELOW AND ITS JUST MY EXPERIENCE, I AM NOT RESPONSIBLE IF SOMEONE TRY TO GET ANY IDEAS FROM IT AND BRICK HIS PHONE
I purchased Nokia 1 (TA-1047). My only objective was to automatically record sound from 8AM to 2 PM. So I started root process (Devmode: OK, boot loader unlock: OK, TWRP flashing and running: OK)
BUT WHAT? TWRP is asking for a password... this was not provided in the guide. I tried blank password... not OK. Then I searched the Internet and learned that if I cancel on password screen and then Wipe data then it will be fine. I did that, then made full backup (ADB), and flashed Magisk (ADB)..OK. Restarted the phone and "bump": Phone told me it failed to decrypt and then it went into TWRP boot-loop.
Then I searched again and found TA-1060 recovery bin (from this site) and stock images. I flashed TA-1060 recovery (at that time I did not know that I could go to Boot-loader from TWRP and wasted like an hour to do it using buttons - Correct method is: power off the phone, connect the usb cable, press power and volume down till you see android logo). After flashing 1060 recovery I was able to reset phone and "voila" Magisk was also there.
Now I installed Schedule Voice Recorder, Team-Viewer Host (to transfer big files remotely), App locker (to lock settings and play store), Autostart and Stay (because recorder was getting closed), Dropbox and Dropsync --- and you can guess what would have happened. My mobile kept closing them randomly even if I made Recorder and AutoStart system app and whitelisted in developer setting and set to NOT optimized battery. So I tried to disable Nokia bloat-wares and damaged the system again. This happened for a few iterations before I realized that the Nokia 1 RAM is not sufficient to handle all these apps and I got an idea to upload earlier android version (Spoiler! Hard-brick is coming).
I searched on internet for similar mobile and found Huawei Y3 2017 with same chipset and configuration, Y5 with same chipset but higher configuration. Downloaded stock rom for both. First tried flashing boot and system from TWRP but failed saying that size was different? Downloaded SP flash tool, somehow passed through drivers issue (this would require another thread ). Tried flashing (with formatting) both Y3 2017 UO00 (which was different chipset but i altered scatter file) and Y5 but it failed on some check error. After that my phone was hard bricked!
Then I downloaded nokia 1 stock firmware but it was bad scatter file (only nvram and nvdata was showing), altered it, format+flash: failed again. Searched on internet and found that if I flash wrong preloader then I am done. I was not sure if I had already done it. I altered the scatter file again to include only preloader and thankfully it showed success but any other rom after it, it failed to flash. Found something like Nokia 3 DA and tried it but also failed.
FINALLY: I found nokia 1 nb0 rom and nb0 extractor, extracted rom using that, flash it and "voila" my phone was back alive. Tried to root but failed (because serial number was not same as before and new number did not work). Then I started iterations by mixing roms from my backup and using my "proinfo.bin" and stock rom my phone revived with my own serial number. BUT, then I flashed stock preloader and lk but everything else from Huawei, it failed with check error and then also refused to format for stock rom. Searched on internet about manual formatting, did that (WARNING: starting from address where preloader ends otherwise you would format your preloader as well) then it was back okay.
Rooted again, copied scheduler in sys-priv, whitelisted, not optimize battery. Also team viewer host (normal settings) and dropbox and sync (normal settings). As a work around I have now scheduled the app to record 24 hours instead of 8AM to 2PM so that it always remain as foreground app. 11 hour testing so far so good.
QUESTION: Can I not upload lesser android version (e.g. 4.4 or 5 or 6)? If I can then how.?
Click to expand...
Click to collapse
HELP: mine, TA-1047 is stuck at Nokia logo screen.
Please share me a life saver as you mentioned "I found nokia 1 nb0 rom and nb0 extractor, extracted rom using that, flash it and "voila" my phone was back alive."
I tried many many solutions like SP Flash Tool, Miracle Box, fastboot, .... but still failed and stuck.
I'm suffering day by day trying with no hope and now see your post. Please support me!
Much appreciate!
HELP!!!
My Nokia 1 (TA-1047) was hard bricked and won't turn on. I tried to flash my phone by SP Flashtool but my PC didn't recognize my phone. :crying::crying:
Could you give me the drivers you use and steps to recover my phone. Please help me. Thank u.