Hi guys
I recently got one of these shipped over to Australia. Now I've encountered a few network issues I'd like help to resolve.
1. I think the only HSDPA/UMTS bands available are only 900/2100MHz. That means I can't get access to Telstra's Next G Network as it runs on 850MHz. Unfortunately I can't get access to the service mode at all and I've also downloaded the network app from the android market to see if I can change the band that way, but that doesn't help either - the app just crashes. I guess there's not much I can do there.
2. According to all the sites I've seen about the specs for the phone - LTE bands supported are 800/1800/2600MHz. But I can't seem to get on Telstra's LTE in sydney. The phone assumes that even with a Telstra sim, I'm on roaming with SK Telecom and it states that 4G roaming is now available. The aforementioned network app is set to "GSM/WCDMA/LTE auto" - yet no LTE!
Perhaps I could flash to another ROM? but I'm not sure which would be applicable? The LG Nitro HD has the closest specs in my opinion. Any help would be greatly appreciated.
milkyways2 said:
Hi guys
I recently got one of these shipped over to Australia. Now I've encountered a few network issues I'd like help to resolve.
1. I think the only HSDPA/UMTS bands available are only 900/2100MHz. That means I can't get access to Telstra's Next G Network as it runs on 850MHz. Unfortunately I can't get access to the service mode at all and I've also downloaded the network app from the android market to see if I can change the band that way, but that doesn't help either - the app just crashes. I guess there's not much I can do there.
2. According to all the sites I've seen about the specs for the phone - LTE bands supported are 800/1800/2600MHz. But I can't seem to get on Telstra's LTE in sydney. The phone assumes that even with a Telstra sim, I'm on roaming with SK Telecom and it states that 4G roaming is now available. The aforementioned network app is set to "GSM/WCDMA/LTE auto" - yet no LTE!
Perhaps I could flash to another ROM? but I'm not sure which would be applicable? The LG Nitro HD has the closest specs in my opinion. Any help would be greatly appreciated.
Click to expand...
Click to collapse
1. usually, bands are hardware limited. Meaning if you don't receive a particular band, you probably won't ever be able to.
2. what bands does Telstra's LTE operate on? #1 applies here too. If the LTE antenna in the phone doesn't receive the frequency your operator is transmitting on, there's not much you can do.
And in your "Perhaps", why would you even consider flashing a ROM for a completely different phone to yours???? (unless you WANTED to end up with a paperweight)
EDIT: Look at this thread. Specifically what's in post 2, which reads "So it doesn't matter where you buy the phone from, it will work on Telstra unless you go buy the korean version or something." Just googling your model number (SHV-E120S), it looks like that IS a Korean version of the phone. The fact that you say it says something about roaming for SK Telecom (a South Korean carrier) seems to support that.
EDIT 2: a quick google for the SHV-E120S turns up this page, which says the phone is for networks voice GSM900, GSM1800, GSM1900, data (HSPA+) UMTS900, UMTS2100, and LTE frequencies LTE 800, LTE 1800, LTE 2600.
According to Telstra's wikipedia page, HSPA on Telstra is UMTS850 and UMTS2100, and LTE is LTE1800. So you won't get full support on all of Telstra's bands with that model of phone.
It looks like you'll prob be stuck with 3G nextwork if you use this phone in AUS.
Remember: DO NOT try to flash ROMs that is not for your phone. I've tried this one time and ended up hard-bricking my phone. NEVER DO THIS!
ctomgee said:
1. usually, bands are hardware limited. Meaning if you don't receive a particular band, you probably won't ever be able to.
EDIT 2: a quick google for the SHV-E120S turns up this page, which says the phone is for networks voice GSM900, GSM1800, GSM1900, data (HSPA+) UMTS900, UMTS2100, and LTE frequencies LTE 800, LTE 1800, LTE 2600.
According to Telstra's wikipedia page, HSPA on Telstra is UMTS850 and UMTS2100, and LTE is LTE1800. So you won't get full support on all of Telstra's bands with that model of phone.
Click to expand...
Click to collapse
Ive read a number of XDA sites where people flash and install new modems with different bands. Woudl it be possible to install a 850MHz modem into the above phone?
claud001 said:
Ive read a number of XDA sites where people flash and install new modems with different bands. Woudl it be possible to install a 850MHz modem into the above phone?
Click to expand...
Click to collapse
Um, no. No flash will ever address a hardware limitation.
SHV-E120S Network problem...
milkyways2 said:
Hi guys
I recently got one of these shipped over to Australia. Now I've encountered a few network issues I'd like help to resolve.
1. I think the only HSDPA/UMTS bands available are only 900/2100MHz. That means I can't get access to Telstra's Next G Network as it runs on 850MHz. Unfortunately I can't get access to the service mode at all and I've also downloaded the network app from the android market to see if I can change the band that way, but that doesn't help either - the app just crashes. I guess there's not much I can do there.
2. According to all the sites I've seen about the specs for the phone - LTE bands supported are 800/1800/2600MHz. But I can't seem to get on Telstra's LTE in sydney. The phone assumes that even with a Telstra sim, I'm on roaming with SK Telecom and it states that 4G roaming is now available. The aforementioned network app is set to "GSM/WCDMA/LTE auto" - yet no LTE!
Perhaps I could flash to another ROM? but I'm not sure which would be applicable? The LG Nitro HD has the closest specs in my opinion. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Hello guys,
I am from Nepal. I have Samsung SHV-120S and when i was updating my phone phone went to dead boot mode. I did dead boot repair using riff JTAG and after flashing using 4.0.4 i am unable to use gsm only network cause i dont have hspda and above netoworks here. Any solution?
Inside of mobile networks there is just 2 option LTE Preferred and 3G Only... but i dont have 3G network and i dont know about lte network.
i had tried teamleader rom also but problem doesnt appears...
help somebody..
sim tower problem
ctomgee said:
1. usually, bands are hardware limited. Meaning if you don't receive a particular band, you probably won't ever be able to.
2. what bands does Telstra's LTE operate on? #1 applies here too. If the LTE antenna in the phone doesn't receive the frequency your operator is transmitting on, there's not much you can do.
And in your "Perhaps", why would you even consider flashing a ROM for a completely different phone to yours???? (unless you WANTED to end up with a paperweight)
EDIT: Look at this thread. Specifically what's in post 2, which reads "So it doesn't matter where you buy the phone from, it will work on Telstra unless you go buy the korean version or something." Just googling your model number (SHV-E120S), it looks like that IS a Korean version of the phone. The fact that you say it says something about roaming for SK Telecom (a South Korean carrier) seems to support that.
EDIT 2: a quick google for the SHV-E120S turns up this page, which says the phone is for networks voice GSM900, GSM1800, GSM1900, data (HSPA+) UMTS900, UMTS2100, and LTE frequencies LTE 800, LTE 1800, LTE 2600.
According to Telstra's wikipedia page, HSPA on Telstra is UMTS850 and UMTS2100, and LTE is LTE1800. So you won't get full support on all of Telstra's bands with that model of phone.
Click to expand...
Click to collapse
GALAXY S2 HD LTE SHV-120s
while I try to dial it says the message "not registered on network" and after some time it again gets connected to the network but during call 90% of the time it delivers problematic calling experience...
jak_roj said:
Hello guys,
I am from Nepal. I have Samsung SHV-120S and when i was updating my phone phone went to dead boot mode. I did dead boot repair using riff JTAG and after flashing using 4.0.4 i am unable to use gsm only network cause i dont have hspda and above netoworks here. Any solution?
Inside of mobile networks there is just 2 option LTE Preferred and 3G Only... but i dont have 3G network and i dont know about lte network.
i had tried teamleader rom also but problem doesnt appears...
help somebody..
Click to expand...
Click to collapse
I have the exactly same problem here, any idea guys?
med.bassia said:
I have the exactly same problem here, any idea guys?
Click to expand...
Click to collapse
hello guys,
i had the same problem using it in Albania and i find somewhere that you can access the hidden menu by entering at the dial pad the code: 319712358 pass:996412. then at "network settings" you can select GSM modes.
i'm still facing some problem with the calls but overall it's working.
hope it helps.
how could i activate or turn the 3g to 4g? im from PHI
---------- Post added at 07:09 AM ---------- Previous post was at 07:04 AM ----------
ggeku said:
hello guys,
i had the same problem using it in Albania and i find somewhere that you can access the hidden menu by entering at the dial pad the code: 319712358 pass:996412. then at "network settings" you can select GSM modes.
i'm still facing some problem with the calls but overall it's working.
hope it helps.
Click to expand...
Click to collapse
can't access this one. after typing the password. im stuck and nothing happen.
Jepss said:
how could i activate or turn the 3g to 4g? im from PHI
---------- Post added at 07:09 AM ---------- Previous post was at 07:04 AM ----------
can't access this one. after typing the password. im stuck and nothing happen.
Click to expand...
Click to collapse
if you are on JB (4.1.2) it should work or you can even try an app from google play "SKTHiddenMenu", practically does the same thing.
hmm does this unit has many problem??
i would like to root my phone but i still can't find the right apps to use
MrallSunday said:
hmm does this unit has many problem??
i would like to root my phone but i still can't find the right apps to use[/QU
me too i want to root my phone but i can't find the way too. even access the 4g i only access 3g.
Click to expand...
Click to collapse
ggeku said:
if you are on JB (4.1.2) it should work or you can even try an app from google play "SKTHiddenMenu", practically does the same thing.
Click to expand...
Click to collapse
yes im on JB 4.1.2. but i'd stuck on it. after i enter the password? it doesn't happen or it didnt went through. i already try to download the SKTHiddenMenu. when i tap the network it doesnt happen. why else can i do to activate the 4G on this phone?
oh im sorry maybe thats why it not work because im using shv e 120L not 120s im sorry.
so now do you know the password for shv e 120L or its the same with shv e 120s?
Hello,
I have been trying to search for this information for a bit already. I just ordered an unlocked AT&T Alpha unlocked from amazon.com and I would like to use it with the METRO PCS $60 unlimited 4G plan. Will this work? I couldn't tell if I needed to have the phone rooted or just unlocked.
Thanks!
I have phone unlocked and have been using it on tmo without issues for a couple of weeks now
Thanks for the reply. I am assuming that it should work on the network, since Metro PCS and TMO are the same network. I want to go with Metro PCS to save the $20 per month for the same maxed out plan. I read reports of people using other phones, like the One M7 and were able to get it working on Metro PCS along with being able to do the tethering trick.
Anyways, thanks again for the reply.
stivelio said:
I have phone unlocked and have been using it on tmo without issues for a couple of weeks now
Click to expand...
Click to collapse
I am planning to get 850A to use on Wind mobile(Canada)
does it work on tmobile HSPA network?
I have this phone Galaxy Alpha 850M
on Metro PCS right now.
I have excellent voice and call quality
no texting issues etc and lock onto signal extremely well.
Just drop a SIM in set up with Metro and will be fine IF international factory unlocked 850M .
You will have LTE and drop to 3G H H+ during calls usually with voice and Data and even have E in very bad signal areas- all the Bands are in the Phone.
Better speaker than AT&T Qualcomm and cool , black menus.
4 G LTE Metro PCS Branded phones have VoLTE so you have Voice and Data while staying on LTE Band-
This phone of course lacks the Metro Software to do that so will always drop to 3G H or H + during calls or where LTE Signal is weak but still an excellent phone.
For WIND MOBILE - the 850M I have has the 1700 and 1900 Bands for 3G,H, H+ ( 1700 shows up sometimes in Service Menu but not listed in most specs for 850M).
The LTE bands are :
700/850/1800/1900/2100/2600 AND
AWS .
So you should be good in Canada since most Carriers are same Bands as TMobile/Metro USA..
I have the AT&T 850A and I use it on my T-mobile network.
I just disable all the ATT software n once you do that, you dont see it anymore. Its in hiding. Hotspot will work if you root it, but all ATT have blootloader lock. Wifi calling will not work.
This is my secondary phone I use for when I go jogging. My primary phone is the Note 4.
Thanks for the replies. I got the phone and it is working wonderfully on Metro PCS but the odd thing is that it is on the AT&T network and not T-mobile. I have no idea why. I thought Metro was only for T-mobile but it works just great! Cute phone and quick.
For those looking at this thread, I got an unlocked AT&T branded phone from Amazon.Com and it does work on Metro PCS. However I haven't tried the WiFi bypass yet.
Wow. That is weird but good.
You mean you have a Metro PCS Sim but the phone is showing AT&T ?
That is probably just the phone Booting under AT&T but actually on Metro PCS with Tmobile Towers.
On lower left corner you will see Metro PCS..after start up.
Are you getting LTE ?
And when you make a call does Status change to 3G ?
No it isn't. The contract has Metro PCS printed next to AT&T. I never saw that before.
I have lgk7 ms330 thru metro pcs the phone is unlocked by them. Now I see it does not work with certain 4g Bands how to access the service menu to enable those bands?
I have the same problem with my lg K7, it's a T-mobile device. Mine works only the 2G / EDGE BAND. I did unloked the bootloader, also tried build.props but nothing changed, it seems that the other bands are still locked by the manufactor.
Almokhtar said:
I have the same problem with my lg K7, it's a T-mobile device. Mine works only the 2G / EDGE BAND. I did unloked the bootloader, also tried build.props but nothing changed, it seems that the other bands are still locked by the manufactor.
Click to expand...
Click to collapse
Is this the 3G or 4G LTE model?
Top Feel said:
Is this the 3G or 4G LTE model?
Click to expand...
Click to collapse
It's an lg lte 4g model. i put here more software info.
android version 5.1.1
baseband version
MPSS.JO.1.0.c5.7
kernel version is 3.10.49
Software version K33010l
It does not work with certain bands because the flashed modem on the device doesn't support those bands. This is an OEM problem that would be fixed by a custom rom.
Hi I have a lg phone k7 The problem is that it does not support 4G or 3G only 2G so that my country where I live is a 4G signal please help me ???
I have MetroPCS LG K7 phone, its rooted, also unlocked for any gsm carrer and there is a switch for GSM/WDCMA/LTE in the settings, but data only works on 2G, it doesnt switch to 3G or LTE.
in USA I used to use LTE on it, but now I am in Europe, Georgia and Im not able to make it work..
is there any solution for this? thnx in advance for helping
Yes am experiencing the same problems with LG k7 lgms330 on android os 5.1.1 Theres no LTE and no 3g only 2g and edge please help. Also tried shortcut master (Lite) but to no avail yet.
josazee said:
Yes am experiencing the same problems with LG k7 lgms330 on android os 5.1.1 Theres no LTE and no 3g only 2g and edge please help. Also tried shortcut master (Lite) but to no avail yet.
Click to expand...
Click to collapse
Good day! have you find the solution for this? my mother also having this problem with her LG K7 Metro PCs. Maybe the security update is the cause?
Didn't get it solved, guess its unlocked to work that way.
Hi! Can i use any cellular operator with my sim-card or i need to use United cellular sim and this smatrphone us992 locked for another operator
And further. Does the phone work in gsm and can I use 3g and 4g in Europe? what are some other disadvantages?thanks
Hi, I'm using US992 outside of the U.S. with a local USIM. It works fine including the 4G LTE connection.
allthedogs said:
Hi, I'm using US992 outside of the U.S. with a local USIM. It works fine including the 4G LTE connection.
Click to expand...
Click to collapse
Used GSM?