Related
DESCRIPTION:
Today i found the New Root & Installing Custom Recovery(CWM) in KITKAT surely...
I will Provide correct info and help......All This you are gonna do is At your Own Risk... Damage to your device of any type is at your Own Responsibility,,, Don't point finger at me or I will Just Laugh at you...
PREREQUISITES:
First of all, You should Unlock Bootloader so that on every reboot, Your Root shouldn't damage. You can unlock bootloader by simple procedure...and also enable the USB Debugging from Developers options in settings...
PROCEDURE:
FOR UNLOCKING BOOTLOADER, FOLLOW THIS
Download the Attached PC Software Named "Huawei Product ID Generator" then Extract this zip file...
Now open it, fill all Info in it and select the device Y300-0000... After this, it will Generate a Product ID for your Phone....
Now go to this site Unlocking Code website
Login to this site using your Huawei id which you made in themes store or in huawei cloud!!
Use the Serial Number Written on BACK OF YOUR PHONE..!!
Fill like, samrtphone>Product Model should be "HUAWEI Y300-0000"
then fill all fields and captcha also.. Click Submit and get the UNLOCKING CODE....
you can unlock bootloader wid that code then and root permanently....
After receiving the unlock code, write down the code;
Now go in your 4C's Settings>About Phone.
Then tap on Build number 10 times,,, you will get the Developers options in Last of Settings app. Open Developers option and Turn On the USB DEBUGGING.
Now connect your device to PC in MTP mode and then install the ADB drivers for it....
To install adb drivers correctly, use the Software Adb Driver Installer from here
LINK FOR ADB DRIVER INSTALLER
Full ADB folder is also attached Below.... put this folder in drive C.
Now Direct the cursor on the folder ADB, hold Shift and the right mouse button and choose "Open Command Window";
connect your phone to the PC in the "media device";
at the command prompt prescribe ADB Devices ;
then we write ADB reboot bootloader (the device will reboot mode fastboot);
then typed fastboot oem unlock **************** (where the asterisks replace unlock code);
BOOTLOADER UNLOCKED NOW!!
Now You are Ready to install CWM recovery first.... Download the Root and CWM recovery File from here...
This File Also contain Stock Recovery of Kitkat Rom
4C Root+CWM by [email protected]
After this, unzip it and better come again in Fastboot Mode like above as explained, this time, move the recovery file to the adb folder which you want to install.
After that, type fastboot devices to see if your device is correctly attached to PC or Laptop. if yes then type this command in adb to install the Custom Recovery(CWM) in your phone.
fastboot flash recovery cwm.img
Then
fastboot reboot
This will reboot your phone and cwm installed.
Now move the Root.zip file to sd card and using CWM recovery, install it.. and Whoa!
Its done and phone Rooted for sure... wid no bootloop chance..
Now Customize Your Phone Install Viper4Android And Roms Xposed ^_^
If You Want To Stock Recovery After Root Simply Use The Command In Fastboot Mode
fastboot flash recovery stock.img
Then
fastboot reboot
This way, you will have Stock Recovery back.
Hit Thanks and Support me if you Like and get help from this thread...Thank you...
This is Based on Stock Huawei Kernel, Not compiled by Me...
Contributors:
@HassanMirza01
Version Information:
Status: Stable
Stable Release Date: 2015-09-28
Created on: 2015-05-29
Last Updated on: 2016-02-19
Reserved
I'll try it when i arrive home.
Enviado do meu CHC-U01 através de Tapatalk
I flashed the cwm zip .. But now unable to boot in to recovery .. After doing Vol up + power .. Honor title come n nothing happens .. Normal booting is fine , just recoverys bricked I think :crying:
Nops... keep pressing vol up for 3 sec then keep power button pressed also untill cwm appears... Dont release keys when logo appear... Release when cwm appears... @Srijit
Press thanks if i helped you
Followed all the steps but still not able to boot into cwm .. I have lollipop beta installed .. Is that the problem ? :crying:
Its for kitkat nd has kitkat kernel.....
inshaalmirza said:
Today i found the New Root & Installing Custom Recovery(CWM) for sure,,,
First of all, You should Unlock Bootloader so that on every reboot, Your Root shouldn't damage. You can unlock bootloader by simple procedure...and also enable the USB Debugging from Developers options in settings...
Just mail at [email protected] wid subject that unlock bootloader huawei honor 4c and in mail type all info..like imei, serial no. Product number nd model number...they will send you unlocking code....
you can unlock bootloader wid that code then and root permanently....
After receiving the unlock code, write down the code;
download the installer utility ADB and Fastboot and set (if you have them yet);
direct the cursor on the folder ADB, hold Shift and the right mouse button and choose "Open Command Window";
connect your phone to the PC in the "media device";
at the command prompt prescribe ADB Devices ;
then we write ADB reboot bootloader (the device will reboot mode fastboot);
then typed fastboot oem unlock **************** (where the asterisks replace unlock code);
Now You are Ready to install CWM recovery first.... Download the Root and CWM recovery File from here...
https://drive.google.com/file/d/0B0iMDu5QRxNicU1EalpZeHNUR3M/view?usp=sharing
After this, unzip it and better come again in Fastboot Mode like above as explained, this time, move the recovery file to the adb folder which you want to install.
After that, type fastboot devices to see if your device is correctly attached to PC or Laptop. if yes then type this command in adb to install the Custom Recovery(CWM) in your phone.
fastboot flash recovery recovery_cm.img
Then
fastboot reboot
This will reboot your phone and cwm installed.
Now move the Root.zip file to sd card and using CWM recovery, install it.. and Whoa!
Its done and phone Rooted for sure... wid no bootloop chance..
Now Customize Your Phone Install Viper4Android And Roms Xposed ^_^
If You Want To Stock Recovery After Root Simply Use The Command In Fastboot Mode
fastboot flash recovery recovery_official.img
Then
fastboot reboot
Hit Thanks and Support me if you Like and get help from this thread...Thank you...
Credits: Gizdev site...
Click to expand...
Click to collapse
where is for lollipop,,
No lollipop cwm yet...
tested recovery and cannot made a advanced restore. Tried only system but after selection cannor made it to apply.
Anyone knows how?
I backup full... Nd its done
I still dont have the bootloader unlock code
Sent from my ALCATEL ONE TOUCH 7047D using XDA Forums
Lol.... Follow procedure carefully... Nd dont write anything other
Honor 4x I need custom rom and cwm r lollipop update
Sent from my Che1-L04 using Tapatalk
inshaalmirza said:
I backup full... Nd its done
Click to expand...
Click to collapse
Me to.
I tried to restore only system but don't know how.
Everything else seems to work OK.
Enviado do meu CHC-U01 através de Tapatalk
OP! how do you able to get CWM,
does it came from own recovery of 4C? if yes, can you show how
Custom recoveries use the kernel properties of device.... Not the stock recovery converted to cwm.....
Hey. Kingo root android application make tempory root your device. After restart mobile. Back to normal
Sent from my CHM-U01 using XDA Forums
Unlock bootloader... Then it wont come back to normal...
So LeEco ( LeTV or Le ) Launched Their Summer End Device AKA The One and The Only The Flagship Of This Year ( Just jk ) Le MAX 2, This phone has Killer Specs, Killer Price and Everything Which Is Clear and I Also attended the Event which happend in Sirifort India.
Today I'm Going to show You guys a Root Method of The Device, So basically TWRP 3.0.0 Recovery for LeEco Le Max 2 is already available.
Let's Start Doing It :
Firstly Download the following Files :
Download ADB Fastboot Driver : stechguide (dot) com/how-to-install-adb-and-fastboot-on-windows/
Download TWRP 3.0 : androidfilehost (dot) com/?fid=24588239633383558
Download SuperSu : download.chainfire (dot) eu/897/SuperSU/BETA-SuperSU-v2.67-20160121175247.zip
Install TWRP on LeEco Le Max 2 –
1) First enable USB debugging from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
2) Now go to installation directory open ADB folder and open the command window thereby pressing and hold the ‘shift’ key and right-clicked anywhere in that folder.
3) Now connect your phone to PC and reboot the device into fastboot mode by typing
Code:
adb reboot bootloader
4) You are in Fastboot mode now to check your connection by entering below command in command prompt. It will return your device serial number means your device properly connected. Check your driver if the above command is not responding.
Code:
fastboot devices
5) Type the below command correctly in command prompt and then press enter. It starts flashing recovery on your phone.
Code:
fastboot flash recovery recovery.img
6) YAAY!, you installed the custom recovery on YOUR PHONE!
Time to root :
1) To Root LeEco Le Max 2, first, download the SuperSu zip file from above.
2) Now save the SuperSu zip file to your phone.
3) Boot your device into Recovery mode (TWRP) by pressing ‘Volume Down + Power‘ button.
4) In TWRP recovery navigate to Install Zip and select ‘SuperSu.zip’ to root.
5) Swipe to install SuperSu and reboot your device. yaay! you rooted the device!:laugh:
Enjoy!
DakshMiglani said:
So LeEco ( LeTV or Le ) Launched Their Summer End Device AKA The One and The Only The Flagship Of This Year ( Just jk ) Le MAX 2, This phone has Killer Specs, Killer Price and Everything Which Is Clear and I Also attended the Event which happend in Sirifort India.
Today I'm Going to show You guys a Root Method of The Device, So basically TWRP 3.0.0 Recovery for LeEco Le Max 2 is already available.
Let's Start Doing It :
Firstly Download the following Files :
Download ADB Fastboot Driver : stechguide (dot) com/how-to-install-adb-and-fastboot-on-windows/
Download TWRP 3.0 : androidfilehost (dot) com/?fid=24588239633383558
Download SuperSu : download.chainfire (dot) eu/897/SuperSU/BETA-SuperSU-v2.67-20160121175247.zip
Install TWRP on LeEco Le Max 2 –
1) First enable USB debugging from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
2) Now go to installation directory open ADB folder and open the command window thereby pressing and hold the ‘shift’ key and right-clicked anywhere in that folder.
3) Now connect your phone to PC and reboot the device into fastboot mode by typing
Code:
adb reboot bootloader
4) You are in Fastboot mode now to check your connection by entering below command in command prompt. It will return your device serial number means your device properly connected. Check your driver if the above command is not responding.
Code:
fastboot devices
5) Type the below command correctly in command prompt and then press enter. It starts flashing recovery on your phone.
Code:
fastboot flash recovery recovery.img
6) YAAY!, you installed the custom recovery on YOUR PHONE!
Time to root :
1) To Root LeEco Le Max 2, first, download the SuperSu zip file from above.
2) Now save the SuperSu zip file to your phone.
3) Boot your device into Recovery mode (TWRP) by pressing ‘Volume Down + Power‘ button.
4) In TWRP recovery navigate to Install Zip and select ‘SuperSu.zip’ to root.
5) Swipe to install SuperSu and reboot your device. yaay! you rooted the device!:laugh:
Enjoy!
Click to expand...
Click to collapse
very good how to! couldn't go wrong.! before step 4 I also check if device is connected via code: adb devices.
if device is not showing up you already know somethin's wrong.
Thank you for the guide. I pushed twrp into my phone without any error and I'm on the OTA 5.8.015S but it doesn't work. I rebooted into recovery and it still gave me the stock recovery screen.
Finally got it to work! After pushing twrp you have to type fastboot boot twrp.img and you will get a screen that looks like it's broken. Leave it alone for about 1 minute or two then the screen will turn off. Then press the power button once only to wake the screen up. From there twrp is working! Thank you to steve mars and jim262 for this tips!
Cannot mount /cust in TWRP
After trying to flash I noticed that after the wipes The failure of /cust cannot be mounted appears.
Can't get adb/fastboot to work on Windows 10
windhoarse00 said:
Can't get adb/fastboot to work on Windows 10
Click to expand...
Click to collapse
Did you ever get a solution for this?
Windows 10 can be a pain at times when it comes to drivers and stuff.
Sörnäinen said:
Did you ever get a solution for this?
Windows 10 can be a pain at times when it comes to drivers and stuff.
Click to expand...
Click to collapse
Were you asking for help or just wanted to help windhoarse00?
Amowagou said:
Were you asking for help or just wanted to help windhoarse00?
Click to expand...
Click to collapse
I don't have the phone yet - a mix of both, as I will be in a similar situation soon.
@Sörnäinen, I have no problem in getting the adb to work on my Win 10 PC although I have no intention to root or install third party ROM on my phone. I am happy with the stock Chinese 18S firmware.
Amowagou said:
@Sörnäinen, I have no problem in getting the adb to work on my Win 10 PC although I have no intention to root or install third party ROM on my phone. I am happy with the stock Chinese 18S firmware.
Click to expand...
Click to collapse
That's welcome news, cheers.
For me rooting a phone and putting a custom ROM of my choice is essential - not to speak of Titanium Backup to transfer all my stuff to the new phone.
I can use adb to reboot the phone into bootloader. But the fastboot seems not working. Anyone has idea?
nflau said:
I can use adb to reboot the phone into bootloader. But the fastboot seems not working. Anyone has idea?
Click to expand...
Click to collapse
Yep. I ended up with the exactly same issue.
Not working at all, no matter what I do.
Hm. Can anyone help? My phone is not being recognized in ADB devices. Not on my Windows 10 machine, not on my windows 7 machine, not on my Mac.
So it must be something on the phone site. Rooting as well as installation of TWRP sadly not possible this way.
Any help available?
Sörnäinen said:
Hm. Can anyone help? My phone is not being recognized in ADB devices. Not on my Windows 10 machine, not on my windows 7 machine, not on my Mac.
So it must be something on the phone site. Rooting as well as installation of TWRP sadly not possible this way.
Any help available?
Click to expand...
Click to collapse
Where did you buy it? I bought from geekbuying two weeks ago. My EUI version is 5.8.0.15S(Stable), and seems like a special build for international user with google play store.
nflau said:
Where did you buy it? I bought from geekbuying two weeks ago. My EUI version is 5.8.0.15S(Stable), and seems like a special build for international user with google play store.
Click to expand...
Click to collapse
Gearbest.
I'm already considering to just keep the EUI, but I do not trust their PlayStore installation...
Ok. For all those who run into troubles:
Windows 10 has driver issues. You need to install a separate fastboot driver via the device manager of Windows.
And the TWRP that's suggested in this thread can have issues - the TWRP von TeamSpain is less temperamental.
I also noted that adb and fastboot only worked from the minimal Adb and fastboot thread here on XDA, the 15 sec version wouldn't want to work on my Windows system.
This was a bumpy ride, heaven's sake.
Sörnäinen said:
Ok. For all those who run into troubles:
Windows 10 has driver issues. You need to install a separate fastboot driver via the device manager of Windows.
And the TWRP that's suggested in this thread can have issues - the TWRP von TeamSpain is less temperamental.
I also noted that adb and fastboot only worked from the minimal Adb and fastboot thread here on XDA, the 15 sec version wouldn't want to work on my Windows system.
This was a bumpy ride, heaven's sake.
Click to expand...
Click to collapse
Where to download the driver? Thanks!
nflau said:
Where to download the driver? Thanks!
Click to expand...
Click to collapse
No need to download. Just choose the list of drivers on the PC and take the one that's made for fastboot.
this is not real for dummies
this is what you forgot
1) after enable debug mode with tapping 7 times build you must actually enabyle usb debug in settings
2) to install the driver in win10 which dont work automatic unrar the adbsetup and then start in driver dir DPInst_x64.exe
3) after I did manage to adb reboot bootloader I got after reboot into the bootloader but then I am stuck
what is recovery image? and fastboot devices shows nothing
Hi all,
I'm not an expert with flashing ROMs/recovery and stuff, but I think I know the basics. So, if I was missing something, please forgive me in advance
I'm trying to install TWRP on my Oukitel K6000 Pro, but can't do it for some reason. The things I tried:
1. Rooting my phone w/ kingroot to install flashify. Kingroot failed to root my phone.
2. Via linux machine, using fastboot command. Fastboot failed installing the recovery (USB debugning was turn on. OEM unlocking was turn on, but I wasn't sure I even needed it). Error message I got: "FAILED (remote: download for partition 'recovery' is not allowed"
3. Using windows 7 and windows 10 machines to install it via SP-flash-tool (USB debuging and OEM unlocking was turned on). The SP-flash-tool did not recognized my phone.
4. Using SP-flash-tool with FWUL live-CD. It did not recognize my phone.
5. Using SP-flash-tool with linux machine. It did not recognize my phone.
As for #3 above, I was trying to install MTK drivers before performing the flash process. I think I got it right (for the win10 machine, I rebooted to a mode without signature check as required), but I'm not sure though.
If anyone can step in and help with that - I would much appreciate it.
Thanks in advance,
Tamir
you need the right drivers and the right adb tool.
Download adb tools of android sdk, google it.
Then download the oukitel drivers-> Driver_Auto_Installer_v5.1453.03, search for those., install them.
Try again, good luck.
Rooting and unlocking your phone will format your phone, beware of losing everything on it.
Btw, never use kingroot. Use latest SP Flashtool Version 1728,
Guide:
Download Magisk V16 or SuperSu to your micro sd on your phone.
--(Download your desired firmware, if you want to upgrade as well. (if you want, not needed, since you only want to root or install twrp)--
Download SPFlashTool compatible TWRP from a site that i can't mention here.
Turn off your phone.
Open Splflashtool, select the Android Scatter file that was downloaded with your twrp.
A little bit under that, select Download Only, and NOT firmware ugprade etc.
Now click Download, connect your turned off phone to your pc.
You should hear a windows sound, look at the tool and DO NOT Disconnect your phone. until a popup with Success and a green Symbol appears.
be patient and let it run. (shouldn't actually take longer than 3-5seconds)
After it is done, press simultaneously the Power and Volume+ Keys until a really small menu on the left side screen appears.
Now you can navigate with the Volume+ Key, from the top to the bottom, in an endless loop.
With the Volume- Key you can select on of the three options:
Recovery <-this is what we want, select it!
Fastboot (not really needed for us)
Normal (normal Reboot - Start of the phone)
You will now see the bootlogo, then the twrp menu will show up.
Now you can Flash Magisk or SuperSu for Root. Wipe Dalvik and cache, Reboot, Enjoy.
Hey there,
i was wondering if anyone got an idea how to get root access / TWRP working on a Doogee T6 Pro ?
I don't really find anything online that seems to be working and of course most one-click root tools dont work for China phones.
Anyone got any idea ? The official forums look empty as well.
It looks good
Applesoap said:
Hey there,
i was wondering if anyone got an idea how to get root access / TWRP working on a Doogee T6 Pro ?
I don't really find anything online that seems to be working and of course most one-click root tools dont work for China phones.
Anyone got any idea ? The official forums look empty as well.
Click to expand...
Click to collapse
Some useful tips for rooting MAZE Alpha, perhaps will help you : MAZE Alpha root
Use the method I to patch your boot.img with Magisk-v14 and flash the result image, it must works
Here is the HowTo, have done it 3 times yet:
First, get the correct TWRP Version for Doogee T6Pro ( i dont remember where i got it, i can upload it somewhere if someone have a good location) and the SuperSu Zip.
Then, activate the Developer Options in the Device Settings and Activate the OEM Unlock and USB Debugging in there.
The next Step is to Boot the Device in Fastboot mode. you can either do it by USB with the Terminal Command: "adb reboot bootloader" or you can turn the device of and then reboot it by pressing the Volume Up Button and the Power Button simultanously (quite difficult, didnt Work every Time). You will get to a menue with 3 options: Boot to Recovery, Fastboot and Normal. Switch through these Options with the Volume Up Button and Select it with the Volume Down. Go To the Fastboot Option and Select it.
In Fastboot Mode, plug in the device to an computer and type the terminal command "fastboot oem unlock" (in windows, you have to install the fastboot tools. i dont remember that i had to install them in ubuntu... im not sure). this will wipe the whole data of the device. its important to reboot the device afterwards normaly. otherwise it could happen that you get stuck in an bootloop later ( happend twice to me ) this normal system boot will last much longer then normal, so get a coffee or tea
the next step is do get to fastboot mode again and then send from your computer the command: "fastboot flash recovery twrp-recovery-filename.img". this will flash the recovery.img on the recovery partition.
than go to the bootloadermenue and this time you dont choose fastboot but the recovery option. this will start TWRP
while TWRP is running, you can copy the SuperSU zip to the device with Nautilus or in windows systems with windows explorer. then select "Install" in TWRP and select the SuperSU.zip.
After the installation, reboot to normal system and you are ready with rooting!
if something goes wrong, it can happen that booting to normal system will get you stuck in an bootloop. the last time i could repair the system by booting into recovery (TWRP) and select the Wipe menue and there the Format option. the other time i downloaded the original system from Doogee and flashed all partitions. im not sure if that was necessary.... but who knows :fingers-crossed:
Hello guys, I tried to install a custom rom "resurrection remix" for my Blackview bv9500,
it worked but after a factory reset from the Android menu (was the thing not to do?), The phone is stuck in a boot loop (restart each time on the "twrp recovery") On another forum, someone is talking about a code that I have to write in the console in the "trwp recovery" but it does not work. For now, custom rom or rom reinstallation does not work either. Can you help me guys ?? Thank you so much..
bv9500
Same thing of the boot loop happen to me, as I advice I will put the phone in fastboot mode ( press: volume - and porwer button ), connect the phone to your pc, and once you have installed the adb drivers and the sdk plataform, enter in the sdk plataform and press shift and right click, then open the cmd or power shell, whatever, then write: fastboot devices
So now you will need to install the twrp again first with recovery.img file and then with the twrp.zip ( this via sd card and with the twrp ), to do that write in the cmd fastboot flash recovery, once you do that press first power button and then volume +, twrp will appear, install the twrp.zip file and know install again the custom rom or just the stock one that comes with phone that you can find via internet but as you onow it's android 8.1 not 9.0, and you must report this to them as a bug to keep improving the rom ;P.